Database Info

[mod] Clockwork recovery 3.0.2.8 [easy install] v3

I have put together a little program to allow me to install recovery quicker because I got fed up of it taking so long.
Its dead easy to use!
instructions
download file
unzip
connect vega and make sure usb debugging in enabled
click windows_install, mac_install, or linux_install to flash depending on what your running (u should know that )
wait for that to finish
to boot into recovery click the recovery icon in your app draw
Download v3 clicky - mirror 1
another v3 - mirror 2
For those of you that are having an "error: device not found"
It means that you dont have the adb drivers installed correctly
To check right click on the windows folder and click command prompt here. then type adb devices
If nothing shows up then it means the drivers arent installed
To install them correctly follow this guide
http://android.modaco.com/content/advent-vega-vega-modaco-com/327084/what-to-do-when-your-usb-drivers-are-wrong-win7-64/
Click to expand...
Click to collapse
v1 - windows only
v2 - added mac and linux
v3 - updated to CW 3.0.2.8
thanks go to @mad murdock for making the image and now for fast mirrors
also thanks to @bob1369 who has made a mac and Linux version

i have created mac and linux versions
linux; http://www.megaupload.com/?d=JNEP1GJ5
mac; http://www.megaupload.com/?d=O73B61F0
i suggest creating a small automator app on the mac to further speed installation of clockworkmod just drag run shell script into a work flow and write in the box below the code you would usually use to run the script from terminal e.g.
cd /route/to/script
./install.sh

This worked a treat for me.
I used it to update cwm to the latest version.
Thanks very much for a time saving app.

bob1369 said:
nice little app have a look at this thread though
http://www.villainrom.co.uk/forum/showthread.php/4483-GUIDE-I-think-I-have-bricked-my-vega
restore nandroid through nvflash including cwm of course just a bit quicker thanks to lennyuk for pointing me to it
i have also created mac and linux versions (untested)
linux; http://www.megaupload.com/?d=K79J2BXY
mac; http://www.megaupload.com/?d=QF2YKI4Y
update: i have tested the mac version and discovered the message cannot chmod etc is displayed but script finishes and recovery is installed will rectify soon
Click to expand...
Click to collapse
ahh nice work! i will add to the first post and mention you
i will test linux some time

bob1369 said:
nice little app have a look at this thread though
http://www.villainrom.co.uk/forum/showthread.php/4483-GUIDE-I-think-I-have-bricked-my-vega
restore nandroid through nvflash including cwm of course just a bit quicker thanks to lennyuk for pointing me to it
i have also created mac and linux versions (untested)
linux; http://www.megaupload.com/?d=K79J2BXY
mac; http://www.megaupload.com/?d=QF2YKI4Y
update: i have tested the mac version and discovered the message cannot chmod etc is displayed but script finishes and recovery is installed will rectify soon
Click to expand...
Click to collapse
I have tested the linux version. It works. Same thing with the chmod... I guess you cannot chmod something that is not there.. Just remove the trailing slash. It should work then....

help
my computer cant detect my advent vega
i try xp win7 and vista
help

device no find
after i use install
the word"device no find"
anyone help

fung58745 said:
after i use install
the word"device no find"
anyone help
Click to expand...
Click to collapse
on the vega or pc?

on pc and my vega is in usb debug

same ad "add.thebad " devices not find
my i hav been setup up adb

well done! pretty userfriendly - will link to this post

i mirrored your files - if thats okay with you. at least mirror 1 got gigabit ethernet connection - i download with 2mb/s from it (my local maximum). if you dont wanna use that mirror, tell me, i remove files and links
had to rename file since spaces are no-go the _noflash hopefully keeps "cwm gives error due flashing" on a low degree - people tend to flash every .zip from recovery.
hope that helps...
mirror1: clockwork_recovery_3.0.2.4_vega_noflash.zip size: 73M (76109336 bytes)
mirror2: clockwork_recovery_3.0.2.4_vega_noflash.zip md5sum: 4d8cf9aa85331e8e2673b3406646fbc5

fung58745 said:
on pc and my vega is in usb debug
Click to expand...
Click to collapse
fung58745 said:
same ad "add.thebad " devices not find
my i hav been setup up adb
Click to expand...
Click to collapse
odd, does the vega show up if you do "adb devices"?

mad-murdock said:
i mirrored your files - if thats okay with you. at least mirror 1 got gigabit ethernet connection - i download with 2mb/s from it (my local maximum). if you dont wanna use that mirror, tell me, i remove files and links
had to rename file since spaces are no-go the _noflash hopefully keeps "cwm gives error due flashing" on a low degree - people tend to flash every .zip from recovery.
Click to expand...
Click to collapse
o yeah, that speedy download is nice i will put in first post thanks.
i have merged mac and linux as well attatched to first post
i will pm

same here. device not found.
adb devices output:
Code:
List of devices attached
So device was not found for some reason. Will try adb bundled in android sdk and also reboot device etc etc.

fused#1 said:
same here. device not found.
adb devices output:
Code:
List of devices attached
So device was not found for some reason. Will try adb bundled in android sdk and also reboot device etc etc.
Click to expand...
Click to collapse
It seems like its not using the right driver for some reason....
edit: forgot to say, Windows 7

fused#1 said:
It seems like its not using the right driver for some reason....
edit: forgot to say, Windows 7
Click to expand...
Click to collapse
are you sure you have the vega installed correctly. go to devises and printers > nvidia harmony > hardware and tell me what you see in that list

add.thebad said:
are you sure you have the vega installed correctly. go to devises and printers > nvidia harmony > hardware and tell me what you see in that list
Click to expand...
Click to collapse
This is what I see:
Android Debug Bridge Interface
G:\
Nvidia Tegra 2 USB Device
USB Mass storage
USB Device
(last 2 roughly translated from german)

fused#1 said:
This is what I see:
Android Debug Bridge Interface
G:\
Nvidia Tegra 2 USB Device
USB Mass storage
USB Device
(last 2 roughly translated from german)
Click to expand...
Click to collapse
hmmm, a little confused by this one. mines works correctly and shows up under adb devices but mine shows up as android composite adb interface
try an install like this
http://android.modaco.com/content/advent-vega-vega-modaco-com/327084/what-to-do-when-your-usb-drivers-are-wrong-win7-64/
i think that should set it up right
have you used the vega and adb before?

Thank you. I will try that right now. Used adb with a desire until today.

[Q] adb error:device not found[Solved]

I get this error when i try to connect my tab to adb ..do you guys have any ideas what i can do to make it to work?
I mention that i have the drivers(from Kies),usb debugging is enabled and adb works on my phone.

I believe you need the android usb drivers supplied by google to get it to connect. They can be downloaded using the sdk package manager. Also I'm not sure it will work having the Samsung drivers installed and you may have to uninstall them first.

they are installed already since i installed the whole sdk manager pack

tzacapaca said:
they are installed already since i installed the whole sdk manager pack
Click to expand...
Click to collapse
install kies from Samsungs website
Sent from my myTouch 4g via Tapatalk

ringnutz said:
install kies from Samsungs website
Sent from my myTouch 4g via Tapatalk
Click to expand...
Click to collapse
thx for answer but I already done that..any other suggestions?

tzacapaca said:
they are installed already since i installed the whole sdk manager pack
Click to expand...
Click to collapse
What drivers are showing up when you plug in the device? If it says Samsung then you don't have the android drivers installed. And I believe you can't have both installed only one or the other as only one will load when you plug in the device not both.

I have the Samsung Android ADB Interface driver(although is not showing when i plug in the device) and the drivers which came with sdk manager

tzacapaca said:
I have the Samsung Android ADB Interface driver(although is not showing when i plug in the device) and the drivers which came with sdk manager
Click to expand...
Click to collapse
When you plug the device in, under Device Manager in Windows, there should be listed Android Composite ADB Interface under the device. If not the Google USB drivers were not installed properly.

yeah I dont think my theme is the culprit, there are many reasons why ADB wouldnt show devices. Also Heimdall>Zadig is good for drivers.
run sdk manager and install latest google drivers as well.
are you on Windows OS?

nope,not your theme its the culprit..cuz i didnt install it and i cant install it cuz of no adb connection which is required by a tool named AutoDEOTool1.0.3
I installed latest google driver via sdk manager too..
yes,on Win 7 64 bits
*pulling hair*

I didn't have my usb cable yesterday to check it out but adb actually works with the Samsung drivers. Device Manager>Android Phone>SAMSUNG Android ADB Interface. And when I type the command "adb devices" it shows up. This works both if you plug the tablet in wihtout powering it up and when its turned on so I'm not sure what your problem is. I do have Kies installed on the laptop too so yours should be working if you installed the sdk and drivers correctly.
Which Tab do you have? I have the 6210 unlocked wifi only, it could be other models work differently. Not sure if you have a locked bootloader that you can access the tab through adb.

GT P6200 European
and here is what i get on cmd
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Users\Tavi>adb devices
* daemon not running. starting it now *
* daemon started successfully *
List of devices attached
C:\Users\Tavi>adb devices
List of devices attached
C:\Users\Tavi>
EDIT:SOLVED!
Thank you all for answers

How did you solve this?

I input in cmd adb fastboot reboot and suddenly the device got the command and then recognized my tab..(pretty strange i know)

make it done
tzacapaca said:
I get this error when i try to connect my tab to adb ..do you guys have any ideas what i can do to make it to work?
I mention that i have the drivers(from Kies),usb debugging is enabled and adb works on my phone.
Click to expand...
Click to collapse
do this steps:
1) remove battery
2)insert battery
3) connect the phone via usb will turned off and leave it till usb android phone installed
4) turn ur android phone on
5) wait for full boot
6) install Motorola usb driver .zip attached down there
7)select charge only mode
8) then write the commands of tacoroot.bin
9) when all is done hit the thanx button

ADB wireless
I was having the same problem, I tried to install driver, KIES, everything, tried to uninstall then reinstall in control panel, etc... to no avail.
Then I tried adb wireless... and it works. give it a try.

Unitedforlife said:
I was having the same problem, I tried to install driver, KIES, everything, tried to uninstall then reinstall in control panel, etc... to no avail.
Then I tried adb wireless... and it works. give it a try.
Click to expand...
Click to collapse
What do u mean adb wireless?

need Windows 8 USB drivers

Hi,
I just extracted the latest USB driver (USB_Acer_1.0_USB_A700 A701), but there are Windows XP, Vista and 7 drivers inside only.
i tried to install the Windows 7 driver on Windows 8 64-bit, but had no success...
The one that isn´t working is the "USB composite device" driver.
I need any Acer Windows 8 USB 64-bit drivers for Android 4.0...
Will Acer release a Win 8 driver for the A700 in near future?

Hi,
You should try installing the Android SDK, which has general Android drivers inside them.
Connect your Acer device onto your computer.
Install the Android SDK and once the program has started, it'll (down)load and show you all the Android versions and tools.
Make sure you have only selected the checkboxes "Android SDK Platform Tools" and "Google USB driver". Now click on the right bottom button labeled: "Install packages".
Select the radio button: "Accept All" and click "Install".
Now click with the right mouse button on Computer, click Manage. Go to Device Manager. Right click Acer A700, click update driver software.
Choose "Browe my computer for driver software". Choose "Let me pick from a list".
Click all devices or/and Have disk..
Go to C:\Program Files (x86)\Android\android-sdk\extras\google\usb_driver\ and click the file under the 2 folders (android_winusb.inf)
Click on the first one and install.
Good luck and let me know if you succeed.
Edit:
You can skip the first part and download the Google USB driver I uploaded:
http://www55.zippyshare.com/v/1434863/file.html

Thank you very much it worked for me!

Thanks for the re-upload but there appears to be a problem with the contents of the zip file. When I try to extract it, I get this message: " the archive is either in unknown format or damaged". Could you download it yourself, or anyone,& see if you get that message.
Cheers.
EDIT: Thanks Tom for re-uploading again. It extracted OK this time. Unfortunately, I have had to send my A510 tablet in for repair, the charge light stopped working. I must admit to some ignorance in what to do with the unzipped files, as there is no installer for it, unlike a typical install of a USB driver. Perhaps you, or anyone, could educate me a bit?

theoldfarter said:
Thanks for the re-upload but there appears to be a problem with the contents of the zip file. When I try to extract it, I get this message: " the archive is either in unknown format or damaged". Could you download it yourself, or anyone,& see if you get that message.
Cheers.
EDIT: Thanks Tom for re-uploading again. It extracted OK this time. Unfortunately, I have had to send my A510 tablet in for repair, the charge light stopped working. I must admit to some ignorance in what to do with the unzipped files, as there is no installer for it, unlike a typical install of a USB driver. Perhaps you, or anyone, could educate me a bit?
Click to expand...
Click to collapse
Sure thing,
I explained it a little in my previous post, but I will try to explain it a little better this time.
1. Click with the right mouse button on Computer.
2. Click Manage.
3. Go to Device Manager.
4. Right click Acer A700 (or A510, OR anything that looks like an unknown android device), click update driver software.
5. Choose "Browe my computer for driver software". Choose "Let me pick from a list".
6. Click all devices or/and Have disk..
7. Go to the (extracted) folder you used from my upload in the previous post (usb_driver) and click the file under the 2 folders (android_winusb.inf)
8. Click on the first one and install.
Now Windows will recognise your tablet.
If you still don't get the hang of it, check out this video I found on Youtube:
https://www.youtube.com/watch?v=RbXatmo4QBU
The video may seem a bit dull, but it's actually useful if you really can't find any of the things I explained.
In the video, the "woman" explains on how you can find the Device Manager, on another way I explained.
Follow the instruction in the video until Step 8, which means you shouldn't follow step 8 but continue from my instruction from step 5.
Good luck!
Ps. If you really really don't get to install it, I would like to offer to do it for you (no charge, if that even was a question), if you trust a complete stranger on the internet (but you can abort any time). Just PM me.

Thanks. I will do this when my A510 returns from repair. It is waiting for a part to arrive from overseas, so don't know when it will return.

theoldfarter said:
Thanks. I will do this when my A510 returns from repair. It is waiting for a part to arrive from overseas, so don't know when it will return.
Click to expand...
Click to collapse
The A510 has returned. I have tried to install your driver but have no success.
At step 6, I get presented with "Show All Devices". I am shown a list of Manufacturers & Models. I choose nothing & click "I Have Disk".
I navigate to your folder & click on android_winusb.inf
I then click on "Install From Disk" button. I am then shown the option "Select The Device Driver You Want To Install For This Hardware".
There are 3 items shown: 1. Android ADB Interface, 2. Android Bootloader Interface, 3. Android Composite ADB Interface.
I choose number 1 as that is the one I beleive you mean in your option 8.
I click "Next" & get a warning about "Installing This Device Is Not Recommended Because Windows Cannot Verify That It Is Compatible With Your Hardware". I continue the install & after about a minute, I get this message "Windows Found Driver Software For Your Device But Encountered An Error While Attempting To Install It"... and..."Android ADB Interface".... and...."This Device Cannot Start (Code 10)".
The Device Manager now shows Unknown Device as "Android Phone".
Await your reply but am thinking about reinstalling Windows 7 & leaving Win 8 until I get a touch screen laptop & Acer Tablets get a USB driver for Win 8. Acer say they are on the way but can't/won't give me a date.
Windows 8 is an annoyance on my 4 year old Asus N50Vn laptop.

Without drivers, can you still access the SD?

@theoldfarter
That's odd, but can you try choosing the third option: 3. Android Composite ADB Interface.?
Maybe the drivers I uploaded are out of date in Windows 8 and you should try installing the Android SDK.
Install the Android SDK and once the program has started, it'll (down)load and show you all the Android versions and tools.
Make sure you have only selected the checkboxes "Android SDK Platform Tools" and "Google USB driver". Now click on the right bottom button labeled: "Install packages".
Select the radio button: "Accept All" and click "Install".
Click to expand...
Click to collapse
(android_winusb.inf) will be available at the following location:
C:\Program Files (x86)\Android\android-sdk\extras\google\usb_driver\
troun2000 said:
Without drivers, can you still access the SD?
Click to expand...
Click to collapse
Yes, you can. I just tried it with my freshly installed Windows 8 machine.

@TomONeil
Tried the third option: 3. Android Composite ADB Interface but get same error message.
Downloaded the Android SDK from your link & followed your instructions but get the same error message with both option 1 & 3.
I am wondering if it has to do with the A510 being upgraded to Jelly Bean (4.1.2)?
Here is a fellow who has Jelly Bean & Windows 7, where once he had updated to Jelly Bean, his Win 7 doesn't see the tablet anymore. His name is papyb & his post is the second up from the bottom, on page 2 here: EDIT, can't post the link. Darn the rules. lol.
I will try to PM you the link.

You can try install driver from Advance Boot Options. Select no.6: disable driver signature
I am succeed on Cyrus ATOMPAD.

misterkusut said:
You can try install driver from Advance Boot Options. Select no.6: disable driver signature
I am succeed on Cyrus ATOMPAD.
Click to expand...
Click to collapse
Mmm... you lost me there.I have no idea what you mean.

misterkusut said:
You can try install driver from Advance Boot Options. Select no.6: disable driver signature
I am succeed on Cyrus ATOMPAD.
Click to expand...
Click to collapse
Googled it & now know what you mean. That option is for Windows 7.
I use windows 8 & Google tells me this about it:
"7) Disable driver signature enforcement
The Disable driver signature enforcement option allows non-signed drivers to be installed in Windows 8.
This startup option can be helpful during some advanced driver troubleshooting tasks."
I will try this but when I tried installing the driver as per Tom's instructions, the driver in question said it was digitally signed.

misterkusut said:
You can try install driver from Advance Boot Options. Select no.6: disable driver signature
I am succeed on Cyrus ATOMPAD.
Click to expand...
Click to collapse
That won't work 'cause the driver can be installed, only it's not starting.
Do you have USB Debugging turned on in the Developer Options?

TomONeill said:
That won't work 'cause the driver can be installed, only it's not starting.
Do you have USB Debugging turned on in the Developer Options?
Click to expand...
Click to collapse
Did not have that turned on. Done so but makes no difference. I have just discovered that my built-in camera is not working with Win 8, Skype says there is no camera installed. It worked with Win 7. I am thinking that the "unknown" device in Device Manager is the camera, not my tablet.
No wonder I can't install the driver to it. lol.
With the tablet not connected, I uninstall the "unknown" device & then scan for changes & it shows it again.
It looks like the A510 is not recognised by Win 8 as anything, period.
I have had enough of Windows 8. It is causing more problems than it is worth. In a couple of days, I will reinstall Windows 7 & start over.
Will report back when all has finished, which may be in 6 days time.
Thanks for your help so far.

A700, mass storage and Windows 8
Hi
I have installed the USB drivers aa told here, an device manager shows my A700 under Android Phone.
But i cant see the storage.
How can i access both internal storage and SD card on my tablet??

theoldfarter said:
@TomONeil
Tried the third option: 3. Android Composite ADB Interface but get same error message.
Downloaded the Android SDK from your link & followed your instructions but get the same error message with both option 1 & 3.
I am wondering if it has to do with the A510 being upgraded to Jelly Bean (4.1.2)?
Here is a fellow who has Jelly Bean & Windows 7, where once he had updated to Jelly Bean, his Win 7 doesn't see the tablet anymore. His name is papyb & his post is the second up from the bottom, on page 2 here: EDIT, can't post the link. Darn the rules. lol.
I will try to PM you the link.
Click to expand...
Click to collapse
I would like this link as well. Since I've updated my a510 to JB 4.1.2, my computer doesn't detect it when I plug it in via USB. I can plug a USB stick into the tablet and it sees that, but when connecting to PC, nothing at all. USB debugging is also turned on. Would love some assistance with this.

http://www55.zippyshare.com/v/1434863/file.html
This is the USB driver.
When clicking on start and entering "device manager", a new screen will pop-up showing you all the connected devices. Somewhere you should see Unknown, Fastboot, ADB, Android device/phone, A700 or Acer. Install it with the USB driver.
Note for everybody:
If it is NOT working, try to find Android Phone in the categories list when installing the driver. That one might work too if my solution doesn't work.

dis method helped me...!
theoldfarter said:
@TomONeil
Tried the third option: 3. Android Composite ADB Interface but get same error message.
Downloaded the Android SDK from your link & followed your instructions but get the same error message with both option 1 & 3.
I am wondering if it has to do with the A510 being upgraded to Jelly Bean (4.1.2)?
Here is a fellow who has Jelly Bean & Windows 7, where once he had updated to Jelly Bean, his Win 7 doesn't see the tablet anymore. His name is papyb & his post is the second up from the bottom, on page 2 here: EDIT, can't post the link. Darn the rules. lol.
I will try to PM you the link.
Click to expand...
Click to collapse
try this link... http://www.fotoclubinc.com/blog/how-to-disable-driver-signature-enforcement-to-allow-installation-of-windows-7-printer-drivers-on-windows-8/
install the drivers with signature verification off
i too had the same problem on my xperia device
its solved now. :good:

Minix Neo X5 Mini 4.2.2 root how to?

Hi,
I have Minix Neo X5 mini with android version 4.2.2.
There is pre rooted custom rom around internet for now. I tried to root it by myself and saw that it already has root access. But it is not proper. So when i check with root checker so on, it says it is not rooted.
So professionals;
What is missing on my device? I already installed supersu with adb. And tried to install busybox from store but bussybox did not worked at all.
I believe that i don't know some easy details for you. But not easy for me

it's ok
i finally root my device. If someone need the needen files attached. Please follow instructions on bat file.
Select "Connect PC" after all reboots on device.
Device has to be connected as mass storage. USB Development has to be selected. And connect pc via usb. Select "Connect USB" on the device. Run TPSparkyRoot.bat file. Follow instructions.

EccLipSe said:
i finally root my device. If someone need the needen files attached. Please follow instructions on bat file.
Select "Connect PC" after all reboots on device.
Device has to be connected as mass storage. USB Development has to be selected. And connect pc via usb. Select "Connect USB" on the device. Run TPSparkyRoot.bat file. Follow instructions.
Click to expand...
Click to collapse
Hi,
i'm trying to root my device, but even if the ADB interface is visible on my pc, the adb server cannot find the device...
Can you help me to solve this issue ?
Thanks

fiuwe said:
Hi,
i'm trying to root my device, but even if the ADB interface is visible on my pc, the adb server cannot find the device...
Can you help me to solve this issue ?
Thanks
Click to expand...
Click to collapse
Did you had Moborobo app installed in your PC? After every reboot i had to go to Settings > USB > Connect to PC.
PS: I dont know how is supposed to work that bat file, since it try to change SuperSU permissions without first copying it. So i add it (bold):
echo --- Installing SuperSU
adb push SuperSU.apk /system/app/SuperSU.apk
adb shell chown root.root /system/app/SuperSU.apk
I hope it work for you.

@tezouro
Hi,
I did it few hours later my own mex , but thanks anyway

What after rooting?
EccLipSe said:
i finally root my device. If someone need the needen files attached. Please follow instructions on bat file.
Select "Connect PC" after all reboots on device.
Device has to be connected as mass storage. USB Development has to be selected. And connect pc via usb. Select "Connect USB" on the device. Run TPSparkyRoot.bat file. Follow instructions.
Click to expand...
Click to collapse
Thanks! but could please let me know what we can do extra in minix5 other than getting su access?

It worked
The bat solution worked on my minix, but i had to install moborobo first, and then everytime the minix was rebooting because of the script steps, going to the minix menu and activating the connect pc option again before clicking space bar for the next step.

How to change official default setting app to the setting app
You can root with kingroot app it works , but the problem is doesn't let me to open the official setting app but only the device default setting app can be open ...

[Q] USB Problem (searched everywhere)

Since the last windows update from this week windows cant detect my nexus 5. I tried everything. It keeps showing up like "Unknown USB Device (Device Descriptor Request Failed)" And i doesn't show up immediately when i plug in the phone. It takes like 10 seconds, then it shows that with a yellow triangle.
Hope that someone can help me. There is also a thread on Reddit (/r/Nexus5) about this.

hhamzah49 said:
Since the last windows update from this week windows cant detect my nexus 5. I tried everything. It keeps showing up like "Unknown USB Device (Device Descriptor Request Failed)" And i doesn't show up immediately when i plug in the phone. It takes like 10 seconds, then it shows that with a yellow triangle.
Hope that someone can help me. There is also a thread on Reddit (/r/Nexus5) about this.
Click to expand...
Click to collapse
It would help to know what "everything" you have tried.

rootSU said:
It would help to know what "everything" you have tried.
Click to expand...
Click to collapse
uninstall every driver related to android. Uninstall every usb driver. Reinstall everything. Try every sort of install. Install via toolkit. Nothing worked.
I tried other cables, doesnt work. Other computer. On other computers it does work (which arent updated to the latest windows). But the problem isnt something in the hardware because it really started after the update.

none ??

In Device Manager, click on the yellow triangle and then uninstall the driver. Once done unplug the phone and then plug it back in again... Windows should then install the correct driver.
Here's something else to try...
http://androidcowboy.com/2013/11/install-nexus-5-drivers/
If either of those doesn't work you could try a System Restore to a date before the update. Then when Windows update pops up again have a look at what it wants to install to see if you can figure out what caused the problem, then right click and select Hide Update.

hhamzah49 said:
none ??
Click to expand...
Click to collapse
are you on window 8 / 8.1?

samersh72 said:
are you on window 8 / 8.1?
Click to expand...
Click to collapse
8.1 with latest updates
@CitizenLee
already tried that, the problem is that it doesnt recognize it as nexus 5.

hhamzah49 said:
8.1 with latest updates
@CitizenLee
already tried that.
Click to expand...
Click to collapse
uninstall driver and do this:
1) From the Window 8.1 Start screen, move your mouse to the top (or bottom) right corner, and click Settings;
2) Click "Change PC Settings";
3) Click Update and Recovery ;
4) Under Advanced startup, click "Restart Now";
5) Wait for it to restart;
6) Click "Troubleshoot";
7) Click "Advanced options";
8) Click "Startup settings";
9) Click "Restart";
10) Wait for it to restart;
11) Press F7 (i.e, the F7 function key);
Now you can install the driver.

samersh72 said:
uninstall driver and do this:
1) From the Window 8.1 Start screen, move your mouse to the top (or bottom) right corner, and click Settings;
2) Click "Change PC Settings";
3) Click Update and Recovery ;
4) Under Advanced startup, click "Restart Now";
5) Wait for it to restart;
6) Click "Troubleshoot";
7) Click "Advanced options";
8) Click "Startup settings";
9) Click "Restart";
10) Wait for it to restart;
11) Press F7 (i.e, the F7 function key);
Now you can install the driver.
Click to expand...
Click to collapse
Thanks for your quick answer. Didnt help. It still shows up at device manager as "Unknown USB Device (Device Descripter Request Failed)"
If i try to update driver software via device manager it tells me it failed to update with Code 10.
Tried phone on my old laptop with windows 7 and it immediately connected as Nexus 5.

hhamzah49 said:
Thanks for your quick answer. Didnt help. It still shows up at device manager as "Unknown USB Device (Device Descripter Request Failed)"
If i try to update driver software via device manager it tells me it failed to update with Code 10.
Tried phone on my old laptop with windows 7 and it immediately connected as Nexus 5.
Click to expand...
Click to collapse
take a look here:
http://forum.xda-developers.com/showpost.php?p=29044502&postcount=735
i suggest Universal Naked Driver http://forum.xda-developers.com/showpost.php?p=20058157&postcount=1

samersh72 said:
take a look here:
http://forum.xda-developers.com/showpost.php?p=29044502&postcount=735
i suggest Universal Naked Driver http://forum.xda-developers.com/showpost.php?p=20058157&postcount=1
Click to expand...
Click to collapse
Thanks for your quick answer, doesnt work though. When i choose the extracted Universal Naked Driver it tells me that it already has installed the latest drivers for this device.

hhamzah49 said:
Thanks for your quick answer, doesnt work though. When i choose the extracted Universal Naked Driver it tells me that it already has installed the latest drivers for this device.
Click to expand...
Click to collapse
did you follow steps in mentioned link?
try this also http://forum.xda-developers.com/showthread.php?t=2588979

Here try this:
Make sure android sdk with platform tools and usb_driver is installed on your PC and then,
Follow these steps:
1. Connect your phone to your pc and head over to control panel---device manager and select your phone from there.
2. Right click on it and select update driver software.
3. Now select "Browse my computer for driver software"
4. Put this path "C:\Program Files (x86)\Android\android-sdk\extras\google\usb_driver" (C:\Program Files (x86) may differ on your pc depending on where you have installed the SDK)
5. Put a tick on "Include subfolders" and click next.
6. The drivers will be installed again and everything should work now.
Make sure you accept the authorization request popup on your device when you connect to your PC.

vin4yak said:
Here try this:
Make sure android sdk with platform tools and usb_driver is installed on your PC and then,
Follow these steps:
1. Connect your phone to your pc and head over to control panel---device manager and select your phone from there.
2. Right click on it and select update driver software.
3. Now select "Browse my computer for driver software"
4. Put this path "C:\Program Files (x86)\Android\android-sdk\extras\google\usb_driver" (C:\Program Files (x86) may differ on your pc depending on where you have installed the SDK)
5. Put a tick on "Include subfolders" and click next.
6. The drivers will be installed again and everything should work now.
Make sure you accept the authorization request popup on your device when you connect to your PC.
Click to expand...
Click to collapse
samersh72 said:
did you follow steps in mentioned link?
try this also http://forum.xda-developers.com/showthread.php?t=2588979
Click to expand...
Click to collapse
Thanks for all your replys, but as i told you, it doesnt show up as anything related to android. it shows up like this: http://imgur.com/a/W3JEO
This problem also comes when i plugin a normal usb device to put files on.

Same happen to me you have to install adp again

hhamzah49 said:
This problem also comes when i plugin a normal usb device to put files on.
Click to expand...
Click to collapse
That, and the fact it works on your old laptop tells me it's most likely a problem with the USB ports or controller on your PC. Do you have your motherboard disk? If so try reinstalling the drivers. Check USB settings in BIOS too.

CitizenLee said:
That, and the fact it works on your old laptop tells me it's most likely a problem with the USB ports or controller on your PC. Do you have your motherboard disk? If so try reinstalling the drivers. Check USB settings in BIOS too.
Click to expand...
Click to collapse
But how come it worked fine just a few days ago

Put it in my USB 3.0 port and it works. Looks like its "fixed".

hhamzah49 said:
Put it in my USB 3.0 port and it works. Looks like its "fixed".
Click to expand...
Click to collapse
I have the same problem, but i dont have USB 3.0 Did you found any other solution ?

hhamzah49 said:
Put it in my USB 3.0 port and it works. Looks like its "fixed".
Click to expand...
Click to collapse
Just like that?
Sent from my Nexus 5 using Tapatalk