Help! I want to restore my phone to a previous nandroid backup, however, CWM stops on restoring boot.img ......everything else can be restore except for boot.img.... passes md5, but just gets error when flashing... now can't boot.... stuck at the boot screen...
zaghy2zy said:
Help! I want to restore my phone to a previous nandroid backup, however, CWM stops on restoring boot.img ......everything else can be restore except for boot.img.... passes md5, but just gets error when flashing... now can't boot.... stuck at the boot screen...
Click to expand...
Click to collapse
Are you restoring a nandroid for an ICS rom within blue CWM recovery? If so, and if everything else flashed successfully, you can try flashing an ICS kernel image using Heimdall or Odin. If that doesn't work, then you have a borked nandroid restore and need to Odin or Heimdall back to stock Gingerbread and start over.
If you happen to be trying to restore a Gingerbread backup (which I don't think is the case, since you mention a boot.img), then you need to get back to red CWM recovery to restore the Gingerbread nandroid backup.
jscott30 said:
Are you restoring a nandroid for an ICS rom within blue CWM recovery? If so, and if everything else flashed successfully, you can try flashing an ICS kernel image using Heimdall or Odin. If that doesn't work, then you have a borked nandroid restore and need to Odin or Heimdall back to stock Gingerbread and start over.
If you happen to be trying to restore a Gingerbread backup (which I don't think is the case, since you mention a boot.img), then you need to get back to red CWM recovery to restore the Gingerbread nandroid backup.
Click to expand...
Click to collapse
I got it back... And so I was trying to restore a GB nandroid... So what I did is just go back to stock and work up from there... Thanks anyhow! Will look back on this as reference next time... Hehe
my CWM wont restore boot.img. please help, i want my stock android back.
Official_Rainbow_Dash said:
my CWM wont restore boot.img. please help, i want my stock android back.
Click to expand...
Click to collapse
Download one of the MANY fine heimdall or Odin packages here. They are available in rooted or unrooted.
Sent from my Carbon-ized Infuse
I wonder why nobody create a stock root tmobile rom for our 1S. The only option i can find is a nandroid stock root 1.84 but it's only for CWM( there is a lot problem to do restore with that nandroid ) , not for TWRP?
It will take you about a minute to flash cwm. Use it to flash the nandroid after which you can go back to twrp recovery.
Make a nandroid with twrp.
baseballfanz said:
It will take you about a minute to flash cwm. Use it to flash the nandroid after which you can go back to twrp recovery.
Make a nandroid with twrp.
Click to expand...
Click to collapse
yeah, i know that method. i just curious why we don't have a stock root rom in our phone section? I used to have dell streak/vibrant/captivate/mytouch 4g/sensation/samsung s3(now)..all of them have stock root rom. It's just more convenient. :laugh:
Hi,
I have followed everything in this thread http://forum.xda-developers.com/showthread.php?t=1837863
I have backups nandroid ready and wasn't too sure, if I dont like this build then i could restore back to stock using CWM? or Odin.
I felt that I need to wait for reply to comfirm before flashing this cyanogenMOD 10.
Thanks!
LeonKnight12 said:
Hi,
I have followed everything in this thread http://forum.xda-developers.com/showthread.php?t=1837863
I have backups nandroid ready and wasn't too sure, if I dont like this build then i could restore back to stock using CWM? or Odin.
I felt that I need to wait for reply to comfirm before flashing this cyanogenMOD 10.
Thanks!
Click to expand...
Click to collapse
IF my memory serves me right, with an unlocked bootloader, you can recover to a TW rom but I think its needs to either have the kernel built into it OR you need to somehow flash to a TW kernel. I say this because I think that if your kernel is still an AOSP one, then the device will not boot up.
some roms already come with a kernel for their rom so I think in most cases, with CWM 6.0.1.x, you could restore a TW nandroid.
If you want to restore a backup of a TouchWiz rom you have then just use the EZ Recovery app to flash the hybrid (CWM/Kexec) recovery...reboot to recovery and restore your nandroid. Simple process!
Once the Dev's building TW roms start using the non-kexec flashing method then you will be able to restore using the normal CWM recovery. Just like you said, you can also use ODIN to restore to stock but it's a pain because you have to root all over again. Just know you have a few options.
Ok thanks everyone!
So good
Fwiw... I've been switching back and forth between Synergy and CM for a couple days now (flashing multiple times) and cwm touch works for synergy but u need new cwm for CM10.
Hope this helps.
Good day XDA forums,
If I restore a TWRP recovery, do I need the original kernal? I tried restoring Nocturnals Jelly Bean that I backed up in recovery. It did not work without me restoring the kernal through ADB from the ROM first.The reason i'm asking is because I do not have the original kernal, although I do have a backup through TWRP of the original ROM.
you still need to fastboot the kernel for whatever rom your a restoring. i would definitely install flashimagegui to allow on the fly kernel flashing. just make sure to flash kernel beforehand or you will have to find a pc.
hi,i am using stock rom running 4.0.4,i had it rooted too and now i had two queries
1)Is rom manager compatible with Atrix 2??
im asking this because when i open it, it shows u need to install CWM recovery...but no option in that responds...not even intall cwm (1st option in menu)....so i installed CWM using atrix boot strapper app and now still rom manager is not detecting CWM..please help
2)after installing CWM, i had backup my present stock rom..so if i flash a new rom now will that CWM and back up still exist??(because we will wipe data which will remove everyhting right??)
for suppose if i flash jelly bean rom and if i dont like it...can i restore my previous stock rom without bricking my device??
thanks for u r help
vdpraneeth said:
hi,i am using stock rom running 4.0.4,i had it rooted too and now i had two queries
1)Is rom manager compatible with Atrix 2??
im asking this because when i open it, it shows u need to install CWM recovery...but no option in that responds...not even intall cwm (1st option in menu)....so i installed CWM using atrix boot strapper app and now still rom manager is not detecting CWM..please help
2)after installing CWM, i had backup my present stock rom..so if i flash a new rom now will that CWM and back up still exist??(because we will wipe data which will remove everyhting right??)
for suppose if i flash jelly bean rom and if i dont like it...can i restore my previous stock rom without bricking my device??
thanks for u r help
Click to expand...
Click to collapse
1) Rom manager is not compatible with Atrix 2. I would not use it. Why do you need it anyway??
You can use Atrix Bootstrapper to go into CWM recovery . Rest can be done there. Or you can use Boot Menu Manager.
2)Of course! it will still be there! the backup is saved on your SD Card. So as long as you don't format your SD Card. It will be there.
NHS2008 said:
1) Rom manager is not compatible with Atrix 2. I would not use it. Why do you need it anyway??
You can use Atrix Bootstrapper to go into CWM recovery . Rest can be done there. Or you can use Boot Menu Manager.
2)Of course! it will still be there! the backup is saved on your SD Card. So as long as you don't format your SD Card. It will be there.
Click to expand...
Click to collapse
Rom Manager does work with Atrix2. If you're on Stock ICS, you can install CWM on every boot, then flash the Bionic recovery through Rom Manager. That will allow you to use the 1 touch backup in RM, just hit backup rom and everything does what it's supposed to.
Here is the CWM on every boot for Stock ICS.
NHS2008 said:
1) Rom manager is not compatible with Atrix 2. I would not use it. Why do you need it anyway??
You can use Atrix Bootstrapper to go into CWM recovery . Rest can be done there. Or you can use Boot Menu Manager.
2)Of course! it will still be there! the backup is saved on your SD Card. So as long as you don't format your SD Card. It will be there.
Click to expand...
Click to collapse
2)will the CWM recovery exist after flashing new rom or i need to install it again??
when i restore to stock fom JB, it means downgrading the firmware right??
so will there be a chance of bricking or is it same to restore anytime from any version??
vdpraneeth said:
2)will the CWM recovery exist after flashing new rom or i need to install it again??
when i restore to stock fom JB, it means downgrading the firmware right??
so will there be a chance of bricking or is it same to restore anytime from any version??
Click to expand...
Click to collapse
No, your Recovery will be wiped after you flash a new rom, but you can install it again and restore your ROM.
But when restoring a rom, make sure you ARE ON THE ROM you are restoring.
E.g. If you flash JB and want Stock ICS back with your backup. First flash the Stock ICS from RSD and then restore your backup from CWM on it.
Or Vice-Versa.
@41rw4lk, Thanks for rectifying that. I did not bother with Rom Manager much.
NHS2008 said:
No, your Recovery will be wiped after you flash a new rom, but you can install it again and restore your ROM.
But when restoring a rom, make sure you ARE ON THE ROM you are restoring.
E.g. If you flash JB and want Stock ICS back with your backup. First flash the Stock ICS from RSD and then restore your backup from CWM on it.
Or Vice-Versa.
@41rw4lk, Thanks for rectifying that. I did not bother with Rom Manager much.
Click to expand...
Click to collapse
but downgrading to stock ICS from JB will brick my mobile right??
is there any problem if im not on the rom im restoring??
(im a newbie and i dont know much..even not found these after searching a lot..thats the reason im asking all these)
41rw4lk said:
Rom Manager does work with Atrix2. If you're on Stock ICS, you can install CWM on every boot, then flash the Bionic recovery through Rom Manager. That will allow you to use the 1 touch backup in RM, just hit backup rom and everything does what it's supposed to.
Here is the CWM on every boot for Stock ICS.
Click to expand...
Click to collapse
how is it possible to flash bionic recovery through RM...all the menu options are disabled for me there even after CWM installed through bootstrap
vdpraneeth said:
2)will the CWM recovery exist after flashing new rom or i need to install it again??
when i restore to stock fom JB, it means downgrading the firmware right??
so will there be a chance of bricking or is it same to restore anytime from any version??
Click to expand...
Click to collapse
I don't think any recovery exist after flashing a new rom. We have a locked bootloader, so we can't replace the stock recovery.img, all of our recoveries hijack the boot process to work. CM10 and PA I believe have a built in recovery, and that's about as close as you'll get to having a recovery exist after flashing a rom.
As far as restoring from JB, I believe you can downgrade to ICS, but you'll have to look at the JB thread to be certain. I'm on AT&T so I haven't had an opportunity to try JB (officially). CM10 is based on JB, but for our phone with the locked bootloader, it's more of a pseudo experience and is based on our ICS framework.
As for bricking, there is always a chance to brick, that's part of the mod game, but if you read and pay attention to what you have and what you're doing, you'll be alright.
vdpraneeth said:
but downgrading to stock ICS from JB will brick my mobile right??
is there any problem if im not on the rom im restoring??
(im a newbie and i dont know much..even not found these after searching a lot..thats the reason im asking all these)
Click to expand...
Click to collapse
UNLESS you have AT&T phone you should be just fine with ref lashing the ICS.
YES. there is a big problem if you are not on a ROM you are restoring.
Its like you are trying to comlete your jigsaw puzzle by putting pieces from some another jigsaw puzzle.
vdpraneeth said:
how is it possible to flash bionic recovery through RM...all the menu options are disabled for me there even after CWM installed through bootstrap
Click to expand...
Click to collapse
You need to use the CWM on every boot setup, the Atrix2Bootstrap alone won't do.
41rw4lk said:
You need to use the CWM on every boot setup, the Atrix2Bootstrap alone won't do.
Click to expand...
Click to collapse
yes...my phone is an AT&T version...though im using it with IDEA.....
so if i install CWM on every boot,then rom manager will detect it and work right??
vdpraneeth said:
yes...my phone is an AT&T version...though im using it with IDEA.....
so if i install CWM on every boot,then rom manager will detect it and work right??
Click to expand...
Click to collapse
Yes. I will say though, if you're on an AT&T branded phone with AT&T firmware, do NOT try to flash the new JB FXZ. It doesn't matter who your carrier is, it matters what firmware your phone is using. So, if you're on AT&T then you need to make sure that the things you flash are for AT&T, or else you will brick and that will be then end of that.
41rw4lk said:
Yes. I will say though, if you're on an AT&T branded phone with AT&T firmware, do NOT try to flash the new JB FXZ. It doesn't matter who your carrier is, it matters what firmware your phone is using. So, if you're on AT&T then you need to make sure that the things you flash are for AT&T, or else you will brick and that will be then end of that.
Click to expand...
Click to collapse
thanks a lot...
what are the ROMS avaialble for us???
can i reflash stock ICS from any of those ROMS safely??
thank you
vdpraneeth said:
thanks a lot...
what are the ROMS avaialble for us???
can i reflash stock ICS from any of those ROMS safely??
thank you
Click to expand...
Click to collapse
CM10
PA
Numa
MIUI (had battery issues, but I think they got it all worked out)
there's a few, you'll just have to look. Most of the time, if something is not meant for AT&T, the devs will post in the description that it isn't compatible. If you want stock ICS back at anytime, you can do yourself a favor and make a backup of your stock ICS all setup the way you like it, so you can restore if needed. If all else fails, there is an Official ICS FXZ that will get you back to stock ICS.
41rw4lk said:
CM10
PA
Numa
MIUI (had battery issues, but I think they got it all worked out)
there's a few, you'll just have to look. Most of the time, if something is not meant for AT&T, the devs will post in the description that it isn't compatible. If you want stock ICS back at anytime, you can do yourself a favor and make a backup of your stock ICS all setup the way you like it, so you can restore if needed. If all else fails, there is an Official ICS FXZ that will get you back to stock ICS.
Click to expand...
Click to collapse
my main question is :
will downgrade to ICS cause brick??
how do i create my own backup for stock ICS??
vdpraneeth said:
my main question is :
will downgrade to ICS cause brick??
how do i create my own backup for stock ICS??
Click to expand...
Click to collapse
You're killing me smalls. You're on ICS already, you're not downgrading anything, nor can you downgrade ie. Gingerbread. There is no Official JB for AT&T, so that's not an issue. CM10 is a JB based rom built on an ICS frame, (for our phone at least), and again, you're not downgrading.
To make a back up, boot in to CWM or whatever recovery you're using (not stock), and click backup. You might hit up the noob thread to get an idea of the terminology and basics for our device. Not trying to be rude, but you're running yourself in circles. You got to walk before you can run.