Database Info

Stuck at "optimizing android app"

I've a huge problem
I've a Sensation 4g I was on stock ics and i followed the guide to get root, htc dev unlock e CWM... (still s.off) after that I installed 4ext and ARHD 6.7.0.. and everything was fine..
Then i tried to install cyanogenmod 9 which requires CWM again.. so i've installed rom manager and installed cwm through it..
I was stuck on the bootloader image, so i tried to flash back my recovery which of course isn't working because i have CWM now and so i tried to flash back ARHD but it will get untill the beginning when it says "optimizing app" and it restarts and again and again....
Anyway i can fix this problem?? I tried to flash another rom "energy ics" which don't require 4ext.. but i got the same results!!! what should i do?! did i brick my phone?
anyway to install 4ext without having a rom working?

andre_07 said:
I've a huge problem
I've a Sensation 4g I was on stock ics and i followed the guide to get root, htc dev unlock e CWM... (still s.off) after that I installed 4ext and ARHD 6.7.0.. and everything was fine..
Then i tried to install cyanogenmod 9 which requires CWM again.. so i've installed rom manager and installed cwm through it..
I was stuck on the bootloader image, so i tried to flash back my recovery which of course isn't working because i have CWM now and so i tried to flash back ARHD but it will get untill the beginning when it says "optimizing app" and it restarts and again and again....
Anyway i can fix this problem?? I tried to flash another rom "energy ics" which don't require 4ext.. but i got the same results!!! what should i do?! did i brick my phone?
anyway to install 4ext without having a rom working?
Click to expand...
Click to collapse
yes flash recovery using this guide
FLASHING ROMS WITH SON
just follow step 2 from above guide if you are SOFF
if SON follow step 2 and 3

Did you install the correct firmware? ICS based Roms is usually 3.32, firmware ?
Sent from my HTC Sensation 4G using xda premium

realsis said:
Did you install the correct firmware? ICS based Roms is usually 3.32, firmware ?
Sent from my HTC Sensation 4G using xda premium
Click to expand...
Click to collapse
Let's say right now I've a big confusion in my head.. Beore I had ICS working.. i never even tried to downgrade so i should have the correct firmware right?
the last time i check i had 1.32 (and don't remember but it was the last one installed with the tmous OTA)...
Maybe when i did my first format of the sd should i've installed something before the rom?

can anyone giving me the exact path of the cwm backup?

andre_07 said:
can anyone giving me the exact path of the cwm backup?
Click to expand...
Click to collapse
andre read my previous post to flash 4EXT this doesn't require a working rom
also in normal the backups are present on SDCRAD
ie /sdcard/clockworkmod/backup
so once you format the sdcard you will lose the backups

andre_07 said:
Let's say right now I've a big confusion in my head.. Beore I had ICS working.. i never even tried to downgrade so i should have the correct firmware right?
the last time i check i had 1.32 (and don't remember but it was the last one installed with the tmous OTA)...
Maybe when i did my first format of the sd should i've installed something before the rom?
Click to expand...
Click to collapse
If I read this correct you have the official stock firmware that was with the T-Mobile OTA ICS update. This means your bootloader is locked even though you are S-off. You need to flash a engineered Hboot to solve this. Go to this thread to get a firmware package with this. Go to the "User-Friendly Firmware" thread by Kohr-Ah, or you can also use the firmware from GROG88's thread here.

[S4] Flashing from CM10 to TrickDroid 7.1 does not work

Hey Guys,
yesterday I wanted to revert my ROM from CM10 to TrickDroid 7.1. In TWRP 2.2.1 I wiped caches and did a factory reset and then flashed TD 7.1 following torxx's instructions (wipe, install ROM, flash boot.img with his boot flash script, let the ROM boot). After the reboot the phone hang. The startup sound came through but then no further action for about 7 Minutes.
Was that too little time waiting? Or is there any other issue interfering the boot process after reverting from Android 4.1.1 to 4.0.4 Sense?
If anyone can help is much appreciated. Even if I look stupid afterwords
Burkhard

herzbert said:
Hey Guys,
yesterday I wanted to revert my ROM from CM10 to TrickDroid 7.1. In TWRP 2.2.1 I wiped caches and did a factory reset and then flashed TD 7.1 following torxx's instructions (wipe, install ROM, flash boot.img with his boot flash script, let the ROM boot). After the reboot the phone hang. The startup sound came through but then no further action for about 7 Minutes.
Was that too little time waiting? Or is there any other issue interfering the boot process after reverting from Android 4.1.1 to 4.0.4 Sense?
If anyone can help is much appreciated. Even if I look stupid afterwords
Burkhard
Click to expand...
Click to collapse
Perhaps your hboot does not allow flashing or boot.img? Have you tried the fastboot method of flashing boot.img? How about reverting to a nandroid of a sense based ROM, then flashing TD?

el_smurfo said:
Perhaps your hboot does not allow flashing or boot.img? Have you tried the fastboot method of flashing boot.img? How about reverting to a nandroid of a sense based ROM, then flashing TD?
Click to expand...
Click to collapse
Prior to CM10 I was on latest stock ROM. Before that I had custom ROMs. HBoot on my phone after the OTA update is 1.14. Flashing the boot image of CM10 was no problem.
In order to use the phone I reinstalled CM10 and it works.
The boot images were flashed within fastboot. I do not know any other way to flash a boot image.
I dont have a nandroid backup.

Checked MD5?

torxx said:
Checked MD5?
Click to expand...
Click to collapse
They correspond.
If nothing else helps I will try to install the latest RUU and then flash a ROM. But I wanna circumvent the relock and unlock procedure.
Btw: Did anybody notice that the unlock code changes after an update of HBoot? Nobody mentioned that when the new base was released.

Same here... But fine now
herzbert said:
They correspond.
If nothing else helps I will try to install the latest RUU and then flash a ROM. But I wanna circumvent the relock and unlock procedure.
Btw: Did anybody notice that the unlock code changes after an update of HBoot? Nobody mentioned that when the new base was released.
Click to expand...
Click to collapse
Hey there,
I was having the same problems as you messioned. I flashed the boot.img through fastboot myself and some how it then worked Did not have an problems with flashing the boot.img before. But maybe its worth a try.

Of course you need to use fastboot!!

Did not try yet to flash the RUU. There was an update of CM10 yesterday. The heavy battery drain is gone with this update and there is no urgent need to go back to TrickDroid right now.

herzbert said:
Prior to CM10 I was on latest stock ROM. Before that I had custom ROMs. HBoot on my phone after the OTA update is 1.14. Flashing the boot image of CM10 was no problem.
In order to use the phone I reinstalled CM10 and it works.
The boot images were flashed within fastboot. I do not know any other way to flash a boot image.
I dont have a nandroid backup.
Click to expand...
Click to collapse
HBoot 1.14 is the problem. Anything above 1.09 needs special steps to flash unlike simply flashing with twrp as with 1.09 and below.
Sent from my HTC VLE_U using Xparent SkyBlue Tapatalk 2

LikeaG2root said:
HBoot 1.14 is the problem. Anything above 1.09 needs special steps to flash unlike simply flashing with twrp as with 1.09 and below.
Alright, so, what are these special steps? Can you tell? If its not flashing the within recovery and push the boot.img via fastboot to the phone I would be very interested. My previous HBoot version was 1.13. Flashing ROMs was never a big deal. Also not going to CM9 and back to sense based ROMs.
Click to expand...
Click to collapse

I am on hboot 1.14 and it worked via fastboot. Like you mentioned yourself you reinstalled CM10 and it booted, therefore your previous flash of the boot.img didn't work. So just flash the boot.img via bootloader and fastboot and you should be good...

HighRoIIer said:
I am on hboot 1.14 and it worked via fastboot. Like you mentioned yourself you reinstalled CM10 and it booted, therefore your previous flash of the boot.img didn't work. So just flash the boot.img via bootloader and fastboot and you should be good...
Click to expand...
Click to collapse
I did also flash the boot.img via fastboot. Why do you say that anyway? Is there another method to flash a boot.img?

you didn't mention wiping System as part of the full wipe--needs done

Partially solved
rugmankc said:
you didn't mention wiping System as part of the full wipe--needs done
Click to expand...
Click to collapse
Right, I did not mention it because system is wiped by TWRP during flashing the ROM. So there was no need to wipe it seperately. But maybe my mistake was not to wipe data and the new "asec" folder messed things up.
I'll never know because yesterday I did a complete wipe including the SDCard. Afterwards I was able to install TrickDroid flawlessly.
Thank you all for your efforts.

{HELP} device is keep booting into recovey -- SOLVED --

To the Guru of this forum. After my last rom flashing my device is keeping booting into recovery :crying:. Is it briked ? If so my only hope is the unbricking project ? Thanks in advance.

What recovery are you running?
Can you use the power menu within recovery to boot into bootloader?
Also, please provide as much pertinent info as possible, ie: rom you flashed, firmware, s-off or s-on, locked or unlocked. With your description it's basically like saying, "my car makes a noise all the time. what is causing it?".

Its not bricked.If u can enter recovery
Sent from my HTC sensation

Sorry you are right:
What recovery are you running? 4Ext
Can you use the power menu within recovery to boot into bootloader? yes
The device is HTC unlocked with S-On.
Rom JBMIUI v4.1 2.8.31 R2.
HBOOT 1.27.0000
firmware 3.33.401.6
I've format everything but SD. Restored the most recent back up done today before flashing. Once it reboots HTC logo comes up once, black screen, HTC logo, 4Ext is coming up saying that smartflash it is set to update the boot partition on next system start asking if this should be removed.
I've downloaded and installed again PG58IMG *different files using bootloader
I've founded a 3.33.401.6-Unsecured-Boot.img,+Root+Busybox zip file that can be installed via recovery but it did not help.
At this point I need a bit of help to look into the right direction and I'm not sure that Unbrick_Pyramid is the right way.
Thanks again.

Try turning off smartflash and flash a 3.33 stock rom to see if it will boot.
What was your last working setup, and what were you trying to install?
Sent from my HTC Sensation 4G using Tapatalk 2

Hi. Manage to flash a stock 3.33.
It stopped to reboot straight into recovery.
Sits now on HTC logo now for about 10 mins. I plan to let him run for 1 hr and see what happens.
Was thinking to install CWM on the basis that could be a 4ext recovery issue, toughs?
GROGG88 said:
Try turning off smartflash and flash a 3.33 stock rom to see if it will boot.
What was your last working setup, and what were you trying to install?
Sent from my HTC Sensation 4G using Tapatalk 2
Click to expand...
Click to collapse

If you can install clockworkmod that may help.
Tge device isnt getting the message that it has already booted into recovery once. So something may be jacked up with 4ext.
Clockwork may bypass all that when it doesnt know what to do with that signal to run smartflash.
Worst case scenario...put a full pm58img containing a rom and recovery on the sf card and flash that through bootloader.
You should still be able to get to bootloader as the device looks for that option first.
Sent from my HTC Sensation using xda app-developers app

Hallo. Ok installed CWM. Can please direct me to a full pm58img as you mentioned ? Thx.
Skipjacks said:
If you can install clockworkmod that may help.
Tge device isnt getting the message that it has already booted into recovery once. So something may be jacked up with 4ext.
Clockwork may bypass all that when it doesnt know what to do with that signal to run smartflash.
Worst case scenario...put a full pm58img containing a rom and recovery on the sf card and flash that through bootloader.
You should still be able to get to bootloader as the device looks for that option first.
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse

DiscreteTask said:
Hallo. Ok installed CWM. Can please direct me to a full pm58img as you mentioned ? Thx.
Click to expand...
Click to collapse
And did that help? Are you able to get into recovery without errors now? If so you should be able to flash a fresh version of any ROM.
Try that first. Get any ROM. Flash it. See if it boots.
If you have successfully replaced 4EXT I will bet a fresh flash of a ROM will now boot.
Also worth a shot is replacing or upgrading the firmware, as that could be what's sending the phone into recovery on each boot (though this is less likely that 4EXT just being broken)
Flash a firmware PM58IMG like 3.32 or 3.33 and see if that helps.
But for starters, put a fresh ROM on the SD card and flash it with CWM. (BE SURE IT'S A ROM THAT DOESN'T REQUIRE 4EXT!!)
Once you've got it all fixed you can switch back to 4EXT. I have a feeling it was just the copy you were running that got botched. The software itself is solid and stable. A new copy shoudl work fine now.

CWM v5.0.2.0 was installed fine.
3.33 firmware installed once again.
Using this I've installed ROM that I already did in the past w/o luck, they all sit on the HTC logo. Is like the initial boot sequence is broken. Is boot.img part of the firmware or ROM ?
Trying to download some additional ones.
Thanks,
Skipjacks said:
And did that help? Are you able to get into recovery without errors now? If so you should be able to flash a fresh
version of any ROM.
Try that first. Get any ROM. Flash it. See if it boots.
If you have successfully replaced 4EXT I will bet a fresh flash of a ROM will now boot.
Also worth a shot is replacing or upgrading the firmware, as that could be what's sending the phone into recovery on each boot (though this is less likely that 4EXT just being broken)
Flash a firmware PM58IMG like 3.32 or 3.33 and see if that helps.
But for starters, put a fresh ROM on the SD card and flash it with CWM. (BE SURE IT'S A ROM THAT DOESN'T REQUIRE 4EXT!!)
Once you've got it all fixed you can switch back to 4EXT. I have a feeling it was just the copy you were running that got botched. The software itself is solid and stable. A new copy shoudl work fine now.
Click to expand...
Click to collapse

DiscreteTask said:
CWM v5.0.2.0 was installed fine.
3.33 firmware installed once again.
Using this I've installed ROM that I already did in the past w/o luck, they all sit on the HTC logo. Is like the initial boot sequence is broken. Is boot.img part of the firmware or ROM ?
Trying to download some additional ones.
Thanks,
Click to expand...
Click to collapse
The more details you give, the better the answers will be. Don't consider any detail too small.
What do you mean you installed ROM's that you had done in the past? Do you mean you are trying to restore a backup made with 4EXT?
That won't work. You need to flash a fresh version of the ROM after wiping.
Also, CWM won't install some ROM's that you may have used in the past. What ROM are you trying to install?
The HTC logo that first pops up when you hit the power button is part of the firmware.
Make sure you do a full wipe of everything but the SD card from within CWM. Get whatever's causing the problem off that way. Then flash a fresh install of a ROM from scratch.

Hi.
I did not use any backup only fresh ROMs: ARHD, Elegantia, but also stock ROMs I could find.
I've tried also some PG58IMG with ROM included.
Cheers.
Skipjacks said:
The more details you give, the better the answers will be. Don't consider any detail too small.
What do you mean you installed ROM's that you had done in the past? Do you mean you are trying to restore a backup made with 4EXT?
That won't work. You need to flash a fresh version of the ROM after wiping.
Also, CWM won't install some ROM's that you may have used in the past. What ROM are you trying to install?
The HTC logo that first pops up when you hit the power button is part of the firmware.
Make sure you do a full wipe of everything but the SD card from within CWM. Get whatever's causing the problem off that way. Then flash a fresh install of a ROM from scratch.
Click to expand...
Click to collapse

Arhd and elegencia wont work with cwm. So there is your isdue. Try cm9 or 10 to see if you can boot one of those.
Sent from my HTC Sensation using xda app-developers app

Hallo, after trying all option the following did work for me:
- re-lock bootloader via fastboot oem lock
- apply stock ROM founded in this list http://forum.xda-developers.com/showthread.php?t=1074559
- rebooted fine
I guess that HTC RUU had some superpower and erase and installed whatever file(s) were corrupted.
Now I'm on stock 3.6 - fw 3.33.401.106 - radio 11.76A.3504.00UU_11.24A.3504.31_M
HBOOT 1.29 - S-ON - Relocked.
Standard Recovery.
Now I'm reading how to return my device to S-OFF w/o damaging it again.
Many thanks to skipjacks & groog88 :good:
Skipjacks said:
Arhd and elegencia wont work with cwm. So there is your isdue. Try cm9 or 10 to see if you can boot one of those.
Sent from my HTC Sensation using xda app-developers app
Click to expand...
Click to collapse

[HOW-TO] Revert to Stock ROM JB for user with new HBOOT

Hi to All,
I want to share my experience about revert to stock for users that have new HBOOT, unlocked bootloader and custom recovery; can't execute official RUU. ( This method i think is more safe that downgrade HBOOT )
Step ONE:
Install this custom ROM: MaximuS ROM ( read the thread for instruction about installation of this ROM )
( this ROM allow you to receive the message of OTA JB update, if you know another ROM that receive this message you can use as well i think )
Step TWO:
install the stock recovery of HTC One S via fastboot ( after flashing recovery erase cache )
Step THREE:
Reboot your phone in system, configure the rom for first use, go to settings, information, software update and press check now for update.
You'll receive the message for an update, download and install, and now you have stock JB ROM. after reboot you can do a reset ( go to setting => backup and restore ) to clean the application migrated from previous ROM ( MaximuS )
I hope this can help someone else.
p.s. Sorry for my English!

Thanks bro for this, but my problem is not resolved because this rom couldn't install on my HTC One S, i dont know why... Log show me: MD5 files not found

CybulPL said:
Thanks bro for this, but my problem is not resolved because this rom couldn't install on my HTC One S, i dont know why... Log show me: MD5 files not found
Click to expand...
Click to collapse
Witch recovery are you using at the moment? I installed this ROM ( MaximuS ) with Team Win Recovery ( TWRP ) v2.3.3.0 and it's works for me.
( after flashing ROM from recovery remember to flash boot.img by fastboot )

Maverick87Shaka said:
Witch recovery are you using at the moment? I installed this ROM ( MaximuS ) with Team Win Recovery ( TWRP ) v2.3.3.0 and it's works for me.
( after flashing ROM from recovery remember to flash boot.img by fastboot )
Click to expand...
Click to collapse
I use TWRP and CWM and the same. My mate told me that i have unmount 1 and 2 partition in recovery but i don't know how.

Hi everyone,
thanks a lot, this saved my ass ... I had upgraded my stock ICS to stock JB and then tried to go back to stock ICS with a CWM backup - with the result that I had a brick booting only to a black screen.
I still had access to CWM recovery and so could install the Maximus 2.5 ROM and also the update to stock JB ran through just fine.
I did a factory reset afterwards, is it 100% sure that I now have a pure stock JB or could there be some leftovers from the Maximus 2.5 ROM?
Cheers,
Tim

tim_h said:
Hi everyone,
I still had access to CWM recovery and so could install the Maximus 2.5 ROM and also the update to stock JB ran through just fine.
I did a factory reset afterwards, is it 100% sure that I now have a pure stock JB or could there be some leftovers from the Maximus 2.5 ROM?
Cheers,
Tim
Click to expand...
Click to collapse
Yes you have a stock JB, because with factory reset you've removed all extra application that there is inside MaximuS v.2.5.
All other unneeded file or executable ( like root executable and all other script in /system ect. ) was removed during installation of new ROM.
Remember just that you need to revert to stock to give your phone back to HTC for guarantee, I thinks you must leave on it the stock recovery.
tim_h said:
Hi everyone,
thanks a lot, this saved my ass ... I had upgraded my stock ICS to stock JB and then tried to go back to stock ICS with a CWM backup - with the result that I had a brick booting only to a black screen.
Cheers,
Tim
Click to expand...
Click to collapse
It's happened because from recovery the system was unable to flash the boot partition. So after you did the CWM restore, you have all the phone with ICS android, but JB kernel, this cause your black screen after boot!!!
If you have the boot.img ( with suitable kernel of your old ROM ) to flash after you did the CWM recovery, you can get back to your BACKUP without any problem.
Also if you don't have the exactly boot.img of your previous ROM of the backup, you can flash any boot.img by fastboot of ICS kernel and this is should be enough to keep your backup running again.

Thanks very much for the additional explanations. I do have the boot.img of my original CWM backup, so should be able to restore it via fastboot. Great!
But first I have to send in my phone to have the USB port fixed under warranty.

Holy ****, is working, thanks man...

zujko said:
Wait to see if i understood, i have now Custom ( Virtuous Ville+ RC-1) JB ROM, with hboot 2.15.0000... unlocked, root, twrp
1.install maximuS V2.5, wipe..
2. flash boot.img with fastboot
3.Check update for JB, and flash new update JB?
And that's it?
I guess we have to make relock bootloader, after flash ICS?
Tnx
Click to expand...
Click to collapse
You just forgot in the list to install the HTC Stock recovery before check the message of update, so:
1 => Wipe and install MaximuS V2.5 ROM
2 => flash with fastboot boot.img of MaximuS V2.5 ROM
3 => flash stock HTC Recovery via fastboot ( fastboot flash recovery ville_recovery_signed.img , then fastboot erase cache ) or get it from One_S_All-In-One_Kit_v1.0
4 => start the phone and check for the JB update
5 => after JB installation do a factory reset to clean up the ROM from the extra application that MaximuS ROM have.
You don't need to relock your bootloader, you just need to install the stock recovery, that's enough.

Hmm, wait, why need install stock recovery?
This JB will be working with custom twrp?
EDIT: I got it

I did it! I unmounted first 3 partitions in TWRP and installation successful.

I am on stock Rom now and used HTC offical update to get to jb...do u think I will have trouble rooting again?
Sent from my HTC One S using xda premium

k1llacanon said:
I am on stock Rom now and used HTC offical update to get to jb...do u think I will have trouble rooting again?
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
I will let you know if I can get it working and flashed it will be rooted in seconds just need stock recovery.

Rooted without a problem, recommend the attached superuser app.

Maverick87Shaka said:
You just forgot in the list to install the HTC Stock recovery before check the message of update, so:
1 => Wipe and install MaximuS V2.5 ROM
2 => flash with fastboot boot.img of MaximuS V2.5 ROM
3 => flash stock HTC Recovery via fastboot ( fastboot flash recovery ville_recovery_signed.img , then fastboot erase cache ) or get it from One_S_All-In-One_Kit_v1.0
4 => start the phone and check for the JB update
5 => after JB installation do a factory reset to clean up the ROM from the extra application that MaximuS ROM have.
You don't need to relock your bootloader, you just need to install the stock recovery, that's enough.
Click to expand...
Click to collapse
Will this work on a T-Mobile HOS with CID HTC__001?
I have followed all the steps from above
- installed the rom
- installed the stock recovery
- then I was able to start the update but when it finished downloading .. I was told that the HTC software on my device has been modified and please revert back and try the update again and it would not preform the update.
What am I doing wrong?
Thanks in Advance

Hi once more,
after going back to pure stock JB this way, can I relock the bootloader to get "RELOCKED" instead of "UNLOCKED/TAMPERED"? (That would be good for sending in my phone under warranty.) Or will the phone stop booting if I relock the bootloader?
As far as I understood, the "canonical" way to get "RELOCKED" would be to lock the bootloader and install the RUU, but since there is no RUU for the unbranded JB yet and downgrading with an older RUU is not possible, I cannot do this.
Cheers,
Tim

tim_h said:
Hi once more,
after going back to pure stock JB this way, can I relock the bootloader to get "RELOCKED" instead of "UNLOCKED/TAMPERED"? (That would be good for sending in my phone under warranty.) Or will the phone stop booting if I relock the bootloader?
Cheers,
Tim
Click to expand...
Click to collapse
You can do Relock bootloader, i think it will boot to system without problem(?)

blah blah blah said:
Will this work on a T-Mobile HOS with CID HTC__001?
I have followed all the steps from above
- installed the rom
- installed the stock recovery
- then I was able to start the update but when it finished downloading .. I was told that the HTC software on my device has been modified and please revert back and try the update again and it would not preform the update.
What am I doing wrong?
Thanks in Advance
Click to expand...
Click to collapse
+ 1
Sent from my HTC One S using xda app-developers app

The only word of caution that I think needs to be shared on almost all threads related to JB updates is to make sure you DO NOT have SuperCID... There have been numerous reports of phones bricking with the OTA JB update with a SuperCID... So if you had previously SuperCID your phone with 11111111, definately change it to something else.

AKToronto said:
The only word of caution that I think needs to be shared on almost all threads related to JB updates is to make sure you DO NOT have SuperCID... There have been numerous reports of phones bricking with the OTA JB update with a SuperCID... So if you had previously SuperCID your phone with 11111111, definately change it to something else.
Click to expand...
Click to collapse
I had to go supercid to run the euro ruu and changed it to HTC__001. Ota still didn't work
Sent from my HTC One S using xda app-developers app

[Q] Boot loops after flashing ANY rom

I have S3 right here and I tried flashing Trickdroid ICS, JB as well as JellyBean Official TWRP zip.
It is S-ON, so after flashing the zip, I go to fastboot and flash boot.img.
I did it already 2-3 times with every rom, but every time I get boot loop. Phone restarts as soon as the first HTC logo disappears.
What is wrong with that?

Do you have the latest TWRP 2.4.1.0 ? (did you try reflashing your recovery?)
What android did you have before unlocking your bootloader? 4.0.3 or 4.0.4?
(and don`t panic If nothing works there is always a solution by relocking your phone and flash the ruu for your phone from here)
http://www.androidfiles.org/ruu/?dir=VilleC2
take a look here:
http://forum.xda-developers.com/showpost.php?p=37498221&postcount=309

impactor said:
I have S3 right here and I tried flashing Trickdroid ICS, JB as well as JellyBean Official TWRP zip.
It is S-ON, so after flashing the zip, I go to fastboot and flash boot.img.
I did it already 2-3 times with every rom, but every time I get boot loop. Phone restarts as soon as the first HTC logo disappears.
What is wrong with that?
Click to expand...
Click to collapse
What's was you on before flashing a custom rom? because just a guess but I think it was 4.0.3 if that is so then try TrickDroid for S3 and get v3 which is 4.0.3 so should work.

It was stock, but I didn't check the version before flashing.
So, TD 3.0, then TD 5.0 and it will work?
By the way, what is better? TD 5.0 or JellyBean Official TWRP?

impactor said:
It was stock, but I didn't check the version before flashing.
So, TD 3.0, then TD 5.0 and it will work?
By the way, what is better? TD 5.0 or JellyBean Official TWRP?
Click to expand...
Click to collapse
No only v3 but if you can get an RUU thats more up to date then do that and the v4/5 should work.

So you didn't install a custom kernal before
Sent from my KFTT using xda premium

KindleFireGuy said:
So you didn't install a custom kernal before
Sent from my KFTT using xda premium
Click to expand...
Click to collapse
Em what he said he did.

You cannot flash S4 roms with an S3 phone, have you made sure that the Roms you flash are specifically assigned for S3? Cuz most are S4

Thanks, guys. That was HBOOT problem. I flashed latest RUU and then I was able to use JB roms.

I am terribly sorry to bump this thread but it is EXACTLY what I need. I read through it and am slightly confused with what you guys said.
Here's my situation:
I have a HTC Evo 3D and have tried running multiple ROMs and on every ROM I run into a boot loop. I use TWRP 2.2.0 and boot that onto my phone using the code "Fastboot boot twrp-shooter.img", then from there I go into TWRP and add the ROM to the root of my SDcard. Then I use TWRP to wipe my cache, delvik cache, system, and do a factory reset. Then I go to install from SDcard and install my desired ROM that I am trying. It is successful and when I reboot it shows the HTC logo, then the loading screen for the ROM, then it goes black, then back to the HTC logo and it continues to loop the same booting sequence over and over.
Am I doing something wrong? Is there something different that I should use or do?
I've been trying to figure out this issue for more than 36 hours and I am borderline psycho right now, I really need answers!

pcout64 said:
I am terribly sorry to bump this thread but it is EXACTLY what I need. I read through it and am slightly confused with what you guys said.
Here's my situation:
I have a HTC Evo 3D and have tried running multiple ROMs and on every ROM I run into a boot loop. I use TWRP 2.2.0 and boot that onto my phone using the code "Fastboot boot twrp-shooter.img", then from there I go into TWRP and add the ROM to the root of my SDcard. Then I use TWRP to wipe my cache, delvik cache, system, and do a factory reset. Then I go to install from SDcard and install my desired ROM that I am trying. It is successful and when I reboot it shows the HTC logo, then the loading screen for the ROM, then it goes black, then back to the HTC logo and it continues to loop the same booting sequence over and over.
Am I doing something wrong? Is there something different that I should use or do?
I've been trying to figure out this issue for more than 36 hours and I am borderline psycho right now, I really need answers!
Click to expand...
Click to collapse
1. check if you are s-on or s-off. If you are s-on, you will also need to flash the kernel (boot.img) from a computer (after you flash the zip)
2. make sure your rom is compatible with your phone

asdfasdfvful said:
1. check if you are s-on or s-off. If you are s-on, you will also need to flash the kernel (boot.img) from a computer (after you flash the zip)
2. make sure your rom is compatible with your phone
Click to expand...
Click to collapse
I already know that I am s-on, and that all I need is the RUU because all I want is to get right the hell back to stock. The problem is that I can't find a RUU that is compatible with my phone!! Your help searching for one would be amazing!!
HTC Evo 3D CDMA Sprint
Mainver: 2.95.652.5
CID: SPCS_002

pcout64 said:
I already know that I am s-on, and that all I need is the RUU because all I want is to get right the hell back to stock. The problem is that I can't find a RUU that is compatible with my phone!! Your help searching for one would be amazing!!
HTC Evo 3D CDMA Sprint
Mainver: 2.95.652.5
CID: SPCS_002
Click to expand...
Click to collapse
Still new to xda, but check this out?
http://forum.xda-developers.com/wiki/HTC_Evo_3D/CDMA
(ctrl + f and find "ruu")

My mainver is not listed, I have already seen this page
The page was last edited in November of 2012, I think it's a bit out of date