Database Info

rom not boot

I have x10 mini.....
bootloader unlocked
flashed [KERNEL] nAa-12 ics
I can flash any kernel.....then I can flash any rom....
but rom never boot never started.....when I open the phone appeas the logo of kernel and then restart the phone
Why??

Are you using clockwork mod to flash the kernel? Are you clearing cache and dalvik cache before install of the kernel? Was the ROM working before trying to flash the kernel? Need more info!
---------- Post added at 12:39 PM ---------- Previous post was at 12:36 PM ----------
Probably best to just start fresh. Make sure the ROM and kernel you want are on your SD Card.
1. Enter recovery
2. Wipe data/factory reset
3. Clear Cache Partition
4. Wipe Dalvik Cache
5. Install ROM from SD Card
6. Install Kernel from SD Card
7. Reboot phone

I enter recovery off nAa ics3 ....what kernel can I flash from sd after flashing rom???

Follow procedure above, you'll want to flash the ROM, then any supported kernel on top of it.
ToD

step 1-5 I ' m doing ever...I have x10 mini pro and I know something about flashing....I had never problem flashing any rom on x10 mini pro...

Thread title sound like caveman.
Sent from my coffee pot.

Why isn't this in the X10 Mini forum?

veeman said:
Why isn't this in the X10 Mini forum?
Click to expand...
Click to collapse
An obvious reason is the OP is kinda new and its HARD to navigate to that forum.

veeman said:
Why isn't this in the X10 Mini forum?
Click to expand...
Click to collapse
becouce I haven't the permision to write everywhere I want....I need to post 10 times first (rules of xda)

any ideas what can I do?

theskinnydrummer said:
thread title sound like caveman.
Sent from my coffee pot.
Click to expand...
Click to collapse
best. Comment. Ever. Cant. Stop. Laughing.

OptimusLove said:
best. Comment. Ever. Cant. Stop. Laughing.
Click to expand...
Click to collapse
I am not Laughing....idiots

[Q] [HELP] stuck at bootloop

hi all
i am using stock rom DDLF2 (one file) downloaded from teashare.com and using BAM universal kernel 15 beta by xda_BAM. I tried to install CM11 but faced bootloop i.e stuck at samsung logo. now i want to install CM11 plz guide me which kernel and recovery should i use?i am really desparate to use this ROM. thanks in advance.

14 views but no reply??

Firat go to latest cwm and then install

King11amit said:
Firat go to latest cwm and then install
Click to expand...
Click to collapse
which cwm is compatible,will u be kind to elaborate the procedure.
pliss to.provide the link sir
and thanks for replying

Search on forum cant provide link ok
---------- Post added at 03:15 PM ---------- Previous post was at 03:12 PM ----------
Which cwm version u r using

Flash cm10.2 then cm11 cwm upgrade is automatic

already tried that
let me clearify my situtation here
i was on CM10.2 and than tried to update to CM11 by directly flashing CM11 zip as directed by dhiru in the OP,i ended up in bootloop so i flashed DDLF2 yet bootloop resulted.I searched the forum and found BAM kernel as the solution and phone booted successfully.
now u want to flash cm11.can i do it directly or Do i need to flash a diffrent kernel or recovery first?
plz help.

Goto cwm recovery. Wipe user data, format system, flash cm 11 ROM. Good to go.
Sent from my GT-I9003

sam_777 said:
Goto cwm recovery. Wipe user data, format system, flash cm 11 ROM. Good to go.
Sent from my GT-I9003
Click to expand...
Click to collapse
thanks for replying.
so i dont need to flash any other kernel or an updated recovery or anything?

and one more noob question
what diffrence does it make if i install stock ROM DDLF2 using one file only or using 5 files(pit,bootloader,modem etc.) as suggested by sgtechwork in this thread.
forum.xda-developers.com/showthread.php?t=2329200

suripape said:
thanks for replying.
so i dont need to flash any other kernel or an updated recovery or anything?
Click to expand...
Click to collapse
You don't need kernel or cwm. Both are included in cm ROM.
Sent from my GT-I9003

Remove battery and place it back (turn off),
put your phone into download mode (vol down-home then power)
odin
place all the stock rom files (pit, ....)
start
and also I suggest you don't go for the CM11 yet, because it has some bugs as I tried it.
There are better stable roms for SL here.
HTH

[HELP NEEDED] Mi4i stuck after boot logo[Q]

I am trying to install the Carbon Rom in my device.
1. Flashed TWRP and ROOTed
2. Cleared the delvic + cache
3. Flashed the rom and gapps
4. Restarted
5. Phone goes blank at finishing booting.
Tried 3 times
Any solution to this problem???

USE SEARCH BEFORE POSTING SUCH PROBLEMS! THIS HAS BEEN DISCUSSED MANY TIMES.
Did you flash miui6? It's a problem with firmware.
I think you didn't flash miui6 (6.6.x or 5.6.11). Well there is an other solution.
https://basketbuild.com/filedl/devs?...p-6.6.10.0.zip
Flash this file after wiping. Then flash the rom and gapps.

sharan.nyn said:
USE SEARCH BEFORE POSTING SUCH PROBLEMS! THIS HAS BEEN DISCUSSED MANY TIMES.
Did you flash miui6? It's a problem with firmware.
I think you didn't flash miui6 (6.6.x or 5.6.11). Well there is an other solution.
https://basketbuild.com/filedl/devs?...p-6.6.10.0.zip
Flash this file after wiping. Then flash the rom and gapps.
Click to expand...
Click to collapse
The link is dead. Can you please provide me a live link. There are so many links I am getting confused.

Download it from miui site ,-_- there is an option bro to download the older one

faizauthar12 said:
Download it from miui site ,-_- there is an option bro to download the older one
Click to expand...
Click to collapse
I have flashed with a miui 6 rom in fastboot mode. Will it work now???

Stop asking ,just do it

faizauthar12 said:
Stop asking ,just do it
Click to expand...
Click to collapse
It says error. To be specific "Error executing the ......"
Really tired what to do now man. I am most probably doing something else wrong . BTW thanks for the help.

Use twrp bro not the stock recovery
---------- Post added at 09:23 PM ---------- Previous post was at 09:23 PM ----------
If that problem appear ,it maybe because the zip is corrupted ,try another rom dude

juabhi said:
It says error. To be specific "Error executing the ......"
Really tired what to do now man. I am most probably doing something else wrong . BTW thanks for the help.
Click to expand...
Click to collapse
You have to be patient with these stuff, and probably not panic like this
is the problem solved now?

juabhi said:
I am trying to install the Carbon Rom in my device.
1. Flashed TWRP and ROOTed
2. Cleared the delvic + cache
3. Flashed the rom and gapps
4. Restarted
5. Phone goes blank at finishing booting.
Tried 3 times
Any solution to this problem???
Click to expand...
Click to collapse
You have to wipe system and data too before indtalling the rom and not just dalvik and cache

In order to restore to MIUI, you must flash zip using stock recovery, not TWRP!

Try the fastboot method if flashing zip doesn't work for you.

Brdr first flash miui 6 old rom .then try again.

XT926 loses connection with simcard and restarts.

Hello,
Since half a year I have problem with my XT926.
It loses connection with simcard and restarts par time a day.
It has bootloader unlocked and Android version 4.4.2 (183.46.15.XT926)
I have replaced battery but it doesn't help.
What could be a problem?
Regards
Rafal

rafjak said:
Hello,
Since half a year I have problem with my XT926.
It loses connection with simcard and restarts par time a day.
It has bootloader unlocked and Android version 4.4.2 (183.46.15.XT926)
I have replaced battery but it doesn't help.
What could be a problem?
Regards
Rafal
Click to expand...
Click to collapse
Have you tried to re-flash your stock rom.

OGdroidster said:
Have you tried to re-flash your stock rom.
Click to expand...
Click to collapse
It was first what I have done.
Now I want to try cynaogenmod.
Regards
RJ

I had the issue too under cyanogen...
On mine i have disassambled the phone and maximized the gap between Mainboard and housing on the left... Then i fixed the screws again... Now the sim tray is sitting tighter! Only all two weeks i get this error again
Gesendet von meinem Moto Razr M mit Tapatalk

rafjak said:
It was first what I have done.
Now I want to try cynaogenmod.
Regards
RJ
Click to expand...
Click to collapse
cyanogenmod does it too just not as mutch it happens only like one or twice since I changed the file system. Sometimes not even once or twice. I Switch roms alot though. If you want to try this just hit me up and I will give you instructions on how to do it. You have to have a rom ready to flash and go when you do it.

OGdroidster said:
cyanogenmod does it too just not as mutch it happens only like one or twice since I changed the file system. Sometimes not even once or twice. I Switch roms alot though. If you want to try this just hit me up and I will give you instructions on how to do it. You have to have a rom ready to flash and go when you do it.
Click to expand...
Click to collapse
I want to download the latest NIGHTLY rom and flash it from Recovery.
Will it work?
Regards
RJ

rafjak said:
I want to download the latest NIGHTLY rom and flash it from Recovery.
Will it work?
Regards
RJ
Click to expand...
Click to collapse
Yes, Use TWRP 2.8.6.0 when you flash here is the link http://t.co/rIyzeQGzdo and are you rooted?

OGdroidster said:
Yes, Use TWRP 2.8.6.0 when you flash here is the link http://t.co/rIyzeQGzdo and are you rooted?
Click to expand...
Click to collapse
Yes, I am rooted.
I'd rather use this one
http://download.cyanogenmod.org/?device=xt926
RJ

rafjak said:
Yes, I am rooted.
I'd rather use this one
http://download.cyanogenmod.org/?device=xt926
RJ
Click to expand...
Click to collapse
use what ever recovery you want. If you run into problems you can use twrp to fix or repair certain things.

Why there is no INSTALL ZIP in CM Recovery only INSTALL UPDATE?
Is it the same?
Regards
RJ
PS.
I try both CM and TWRP Recovery, and phone stuck on CM logo.

Try re-downloading rom from cm site and put on sd card then go to recovery and do a full wipe by clicking advanced then check mark all boxes except the sd card box. Then flash rom. Your install scripts are in meta inf folder. dont tinker with it.
---------- Post added at 12:27 AM ---------- Previous post was at 12:26 AM ----------
rafjak said:
Why there is no INSTALL ZIP in CM Recovery only INSTALL UPDATE?
Is it the same?
Regards
RJ
PS.
I try both CM and TWRP Recovery, and phone stuck on CM logo.
Click to expand...
Click to collapse
Try re-downloading rom from cm site and put on sd card then go to recovery and do a full wipe by clicking advanced then check mark all boxes except the sd card box. Then flash rom. Your install scripts are in meta inf folder. dont tinker with it.

OGdroidster said:
Try re-downloading rom from cm site and put on sd card then go to recovery and do a full wipe by clicking advanced then check mark all boxes except the sd card box. Then flash rom. Your install scripts are in meta inf folder. dont tinker with it.
---------- Post added at 12:27 AM ---------- Previous post was at 12:26 AM ----------
Try re-downloading rom from cm site and put on sd card then go to recovery and do a full wipe by clicking advanced then check mark all boxes except the sd card box. Then flash rom. Your install scripts are in meta inf folder. dont tinker with it.
Click to expand...
Click to collapse
I have done all those instructions before, but it always stuck at the CM logo.
I have even tried format /data/ partition on f2fs (I have found such solution on this forum) but no results.
Maybe I should try older CM ROM?
RJ

rafjak said:
I have done all those instructions before, but it always stuck at the CM logo.
I have even tried format /data/ partition on f2fs (I have found such solution on this forum) but no results.
Maybe I should try older CM ROM?
RJ
Click to expand...
Click to collapse
What version of TWRP are you using? If you told me already sorry just don't remember.

OGdroidster said:
What version of TWRP are you using? If you told me already sorry just don't remember.
Click to expand...
Click to collapse
2.8.6.0
Is there some newer one for XT926?
RJ

rafjak said:
2.8.6.0
Is there some newer one for XT926?
RJ
Click to expand...
Click to collapse
That the newest version lollipop should work on it. Try changing system to ext4 but swipe factory reset first then click data then change to ext4 then swipe factory reset again then flash rom. Try a a different lollipop ROM. I'm currently using DU. But they all work if you can't flash anything I have been working on stock version of the last 4.4.2 and finally got it to flash via twrp 2.8.6.0. It has root and xposed and app ops adblocker and just got init.d to work just need to do a quick rebuild so init.d sticks via kernel auditor. You can flash it just to get your device going if all else fails.

OGdroidster said:
That the newest version lollipop should work on it. Try changing system to ext4 but swipe factory reset first then click data then change to ext4 then swipe factory reset again then flash rom. Try a a different lollipop ROM. I'm currently using DU. But they all work if you can't flash anything I have been working on stock version of the last 4.4.2 and finally got it to flash via twrp 2.8.6.0. It has root and xposed and app ops adblocker and just got init.d to work just need to do a quick rebuild so init.d sticks via kernel auditor. You can flash it just to get your device going if all else fails.
Click to expand...
Click to collapse
My stock 4.4.2 is now running well , but I have some restarts of device some times,
that why I would like to try CM 12.1. I flash it 3 or 4 times and always stuck on CM logo.
Regards
RJ

rafjak said:
My stock 4.4.2 is now running well , but I have some restarts of device some times,
that why I would like to try CM 12.1. I flash it 3 or 4 times and always stuck on CM logo.
Regards
RJ
Click to expand...
Click to collapse
Mine doesn't reboot and has been optimized. Also try a different ROM to flash but like DU or Mokee there's plenty of other ones. But try changing system to ext4 first. Then flash. I gave you directions on that in post few minutes ago. Try it and see if it works.

Returning to the main topic of this tread.
I have noticed that when I have MOBILE DATA turn off
the restarts do not occur.
Regards
RJ

Is it possible to flash CM 11 via twrp 2.8.6.0?
Regards
RJ

I have found the solution of this issue.
The problem is with the FAST DORMANCY service.
When it is active but provider does not support it
it causes problem.
It should be disabled in the file /system/build.prop
ro.mot.ds.fastdormancy.disable=true
Regards
RJ

Note 7 rom for j7t

What is the proper way to install the note rom on my galaxy j7t im having problems do i root my phone first or when i flash the rom will it root it since it has supersu on it i get stuck on the booting part the note 7 comes up but thats it it keeps flashing then it goes to a black screen and nothing happens please help me out if anyone can thanks :crying::crying::crying:

Ctrterrell said:
What is the proper way to install the note rom on my galaxy j7t im having problems do i root my phone first or when i flash the rom will it root it since it has supersu on it i get stuck on the booting part the note 7 comes up but thats it it keeps flashing then it goes to a black screen and nothing happens please help me out if anyone can thanks :crying::crying::crying:
Click to expand...
Click to collapse
Flash the rom in TWRP then before exiting TWRP flash Messi's permissive kernel. It takes about 10 minutes to boot and some features won't work (wifi, hot-spot, camera and VOLTE). Hope this helps.

Metabolic12 said:
Flash the rom in TWRP then before exiting TWRP flash Messi's permissive kernel. It takes about 10 minutes to boot and some features won't work (wifi, hot-spot, camera and VOLTE). Hope this helps.
Click to expand...
Click to collapse
Dang no WiFi so if I wanna install version 2 do you know if these features still won't work or would I even have to flash the kernel for the note rom version 2

Ctrterrell said:
Dang no WiFi so if I wanna install version 2 do you know if these features still won't work or would I even have to flash the kernel for the note rom version 2
Click to expand...
Click to collapse
I've gotten version 2 and 3 to boot on my J7, but the same issues showed in both releases. And yes you have to flash the kernel. Slight differences in the J700F/M/H and our T variant. This is why the Enigma Rom and CM13 (or any other kernel specific build) will never flash and boot without some internal tweaking.

Metabolic12 said:
I've gotten version 2 and 3 to boot on my J7, but the same issues showed in both releases. And yes you have to flash the kernel. Slight differences in the J700F/M/G and our T variant. This is why the Enigma Rom and CM13 (or any other kernel specific build) will never flash and boot without some internal tweaking.
Click to expand...
Click to collapse
OK thanks for your help ima try it now and see what happens and let you know

Ctrterrell said:
OK thanks for your help ima try it now and see what happens and let you know
Click to expand...
Click to collapse
Make a Nandroid before you flash it, just to be safe. If it works just hit the thanks button bro, good luck.

Metabolic12 said:
Make a Nandroid before you flash it, just to be safe. If it works just hit the thanks button bro, good luck.
Click to expand...
Click to collapse
Well I tried I installed the rom then tried to flash the kernel like how you said and it said fail

Ctrterrell said:
Well I tried I installed the rom then tried to flash the kernel like how you said and it said fail
Click to expand...
Click to collapse
Give me your step by step and I'll see if I can help you.

Well I wipe the data system and cache before I installed the rom then afterwards I installed it then I flashed the kernel and it said something bout permission was removed since it couldn't be installed but I will take a pic from my tablet real fast to show you what I was talking about

Metabolic12 said:
Give me your step by step and I'll see if I can help you.
Click to expand...
Click to collapse
This

I forgot to use Odin lol mybad

Ctrterrell said:
This
Click to expand...
Click to collapse
Try this. Take your external SD card and put it in your tablet. Go to Messi's thread for the max kernel in J7T development and download the boot.img not the boot.tar.md5. Finish the download then extract the zip in your external SD card. Put your SD card in your phone, boot into TWRP. Now mount system, cache, art/dalvik, data and internal storage (you may need to format data to access data) now wipe them. Don't wipe your external SD card, so make sure it's not mounted in TWRP. After the wipe mount your external SD, flash the rom, then flash boot.img and tick Boot not recovery before the flash. Reboot and wait. Let me know if it helped man.
---------- Post added at 08:39 PM ---------- Previous post was at 08:19 PM ----------
Ctrterrell said:
I forgot to use Odin lol mybad
Click to expand...
Click to collapse
If you download the boot.img you won't need Odin. But I prefer flashing tars personally, your choice. It should boot for you bro.

Hey thanks bro I finally got it I figured out what I was doing wrong I never flashed the boot img and is the wifi not working on V2

Ctrterrell said:
Hey thanks bro I finally got it I figured out what I was doing wrong I never flashed the boot img and is the wifi not working on V2
Click to expand...
Click to collapse
Glad you got it bro and no the Wi-Fi doesn't work on any of the 3 versions.

Yeah thanks for everu8amd what else roms have you tried and will I have to always flash that kernel when I try to install a roms on this phone or was that only for the note roms

Wi-Fi fix , you just need to get the files from the stock ROM in system,etc. And delete all the files in note 7 folder and put the ones you copy from the stock ROM in that same folder you just delete the Wi-Fi files out of
And Reboot I reboot to recovery and advance wipe click dalvic and cliche

mario1634 said:
Wi-Fi fix , you just need to get the files from the stock ROM in system,etc. And delete all the files in note 7 folder and put the ones you copy from the stock ROM in that same folder you just delete the Wi-Fi files out of
Click to expand...
Click to collapse
Ok ima give it a try In few and see what happens

Have anybody figure out a fix for the camera

mario1634 said:
Have anybody figure out a fix for the camera
Click to expand...
Click to collapse
That's what I was about to ask next I know I was still having problems even when I tried to send a pic it still Would reboot

I'm trying to figure it out now if I get it working I will tell you I get it to stop reboot ever time and now it just force close