EDIT: Post Updated 22-SEP-2013
BATTERY PULL STUCK ON CYMBALINE SCREEN OR STUCK ON CYMBALINE SCREEN:
Look at this Post #737 For 3.1 and 3.8 Kernels Look at Post #742
KERNELS: Stock and Cymbaline (bundled with ROM) in Post #2
DOWNLOADS AND INSTALLATION: Post #2
ADDITIONAL SCREENSHOTS: Post #3
CHANGELOG: Post #4
CAPTURING LOGS IN CASE OF ISSUES: Post #5
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
IMPORTANT
Click to expand...
Click to collapse
- Currently, ONLY JB RADIOS (UCLK4, UCLL3, UXUMA7 or UCMC1) supported. I will provide add-on for other radios (ICS, GB) later.
- Please read the entire post. It is IMPORTANT you follow the instructions (including checking always md5sum) and NOT invent your own procedures.
- Also, I will be updating this post and the following post with updated information, please check before posting.
EMBRYO
Click to expand...
Click to collapse
This is daily driver ROM, based of OEM (Samsung) release for ATT - Build UCMC1. Please if you
are flashing for kicks, don't bother with comments if you don't have anything to enhance the dev thread.
THEME
Click to expand...
Click to collapse
The ROM is themed holo orange with touch of contrast. The base color is #ff8800, use the above to set the colors of the text options in ROMCustomizer themeing options.
ROM ARCHITECTURE
Click to expand...
Click to collapse
The ROM is designed and architected to cater to widest possible audience. To that extent, the OEM distribution is restructured leveraging the new /preload partition to add additional apps.
* All NON core apps are moved to /data partition. Hence can be uninstalled with any standard launcher.
* SecEmail, SecExchange and SecBrowser are in the /data partition too, which mean you can replace them with AOSP ones.
* Although some apps are in /data partition, if you do uninstall them, some feature will not work.
* ROMCustomizer app is included and accessible from Settings or Launcher app drawer, will give you all the additional customizations.
DIFFERENCES FROM EMBRYO 6
Click to expand...
Click to collapse
Here are the differences from EMBRYO6
* The OEM base is UCMC1 (the official Samsung release)
* A lot of core APK's are themed, unlike just the status bar in EMBRYO-6.
* I have not incorporated PDroid for now. May port it back later.
FEATURES
Click to expand...
Click to collapse
I will try to organize this as per the subsytem with ROMCustomizer features/toggle description. The included ROMCustomizer app gives you full access to the customization features. List of Customization Available are:
OEM ENHANCEMENTS AND FIXES
* Quick Panel replaced with 23-mod toggle, with proper changes for flashlight and reboot menus.
* Floating Keyboard layout fixed for the default stock keyboard.
* Screenshot is mapped to Power + Vol Down.
* [Security] Face Lock added.
* SGS3 S-Voice added.
* [System] Smart-Stay
* [Network] Enabled Data roaming option and Network Preferred mode options. (need to be SIM unlocked and radio RAT unlocked).
* [Network] Bluetooth tethering enabled.
* [Network] Native tethering enabled.
* [App] Note-2 Gallery app.
* [Notification Panel] Added Clear button to layout, can be substituted with battery cluster when no ongoing notification events.
* [Settings] Horizontal Sensor Calibration Enabled.
* [Device] Allow full rotation (360 degrees).
Misc Application Tweak Preference (ROMCustomizer)
* [Dialer] Toggle for Ascending ringtone
* [Dialer] Toggle for Exit to Home on End Call.
* [Email-Exchange] Toggle for Bypassing all exchange policies (please enable before setting up accounts).
* [Launcher] Toggle for Wallpaper Scrolling.
Device Tweaks Preference (ROMCustomizer)
* [system] Toggle for disabling ad-blocking hosts file.
* [system] Toggle for enabling Stock gps.conf file.
* [system] Toggle for Long Press back key to kill application. (note: flashbar multiwindow must be enabled).
* [system] Custom Carrier Label.
Extended Power Menu Preference (ROMCustomizer)
* Toggle for Screenshot option.
* Toggle for Data Network Mode.
* Toggle for Recovery.
* Toggle for Download mode.
StatusBar Clock Preference (ROMCustomizer)
* AOKP style clock customization. (Clock location, AM/PM style, Day of week)
* Long Click/Short Click actions for Clock and Date in the pull down Notification drawer.
StatusBar Battery Preference (ROMCustomizer)
* Many Battery Styles available. 1% battery ONLY available for Circle Battery Mod option.
* For Battery With Text option: ability to customize the color for various battery threshold level. (Slim bean style)
StatusBar Notifications (ROMCustomizer)
* Toggles to enable/disable following notifications:
- WiFi connected
- No Sim
- Play Notif sound
- Low battery warning.
- Full battery.
- Hide Carrier Label (statusbar)
- Hide/Show IME Switcher.
- Hide/Show Alarm Icon.
Lockscreen (ROMCustomizer)
Two lockscreens are supported. AOSP (Slim ROM implementation) and Stock Samsung. You can select either one by choosing the lockscreen type.All common lockscreen options are in the Common Lockscreen configuration option in ROMCustomizer.
* [AOSP and Stock] Toggle for Vol. wake.
* [AOSP and Stock] Toggle for Vol. rocker music control. NOTE: Google Music player for AOSP lockscreen and Samsung Music Player for Stock.
* [AOSP and Stock] Toggle for Lockscreen rotation.
* [AOSP and Stock] Toggle for Quick Pin unlock.
* [AOSP and Stock] Toggle for Menu button or Home Button unlock.
* [AOSP and Stock] Full transparent lockscreen supported.
* [AOSP only] Support blackberry and circles lockscreen types. (although the blackberry one will not have the transparency shade when swiped).
* [AOSP only] Bunch of other option(s) see the ROMCustomizer Lockscreen option.
* [Stock Only] Toggle for Ripple Effect. NOTE: Full transparency will NOT work in this scenario.
DISCLAIMER
Click to expand...
Click to collapse
You are assuming all the risk for flashing this. You have been warned.
ISSUES
Click to expand...
Click to collapse
No known major issues except for the ones listed here:
GPL INCLUDED COMPONENTS
Click to expand...
Click to collapse
As per GPL requirements.
* [KERNEL] Cymbaline - 3.8.
Sources: https://github.com/mohankr/kernel_samsung_msm8x60-celox
Branch: celox-jb.
Toolchain: Android NDK rev 8b
*
CREDIT
Click to expand...
Click to collapse
- Samsung for the UCMC1 base.
- wanam and lidroid for the base 23 toggle mod (thank them here).
- battery mod thread for the base icons for the 1% circle battery mod. (hit thanks here)
- Team AOKP (and Team CM) for ROMCustomizer inspiration.
- Slim Team for the AOSP lockscreen base.
- bootanimation picture: cannot find the source, please if someone locates the source, let me know so I can credit them.
Download and Installation Instructions
INSTALLATION
Click to expand...
Click to collapse
PLEASE FOLLOW THE STEPS EXACTLY AND IN THAT ORDER, do not try to be cute and invent your own process, nothing good is come out of that. Also, the only recovery I have tested is CWM 6 from sk8, no other recovery has been tested, the update script depends on the recovery providing reliable execution of the commands. If you bootloop or FC after installation, it is not a good sign. I cannot help you debug that, the update script leaves a log file in /data/log, check for errors there.
Step 1) Make a Nandroid backup and better yet also TiBu if you need to restore apps.
Step 2) Did you do Step 1)???? Do it now, already.
Step 3) Make sure you downloaded the Full Wipe ROM and any add-ons or latest Stock theme or Embryo base theme updates (orange) or bloat. if you want the stock theme.
Step 4) Please make sure to check the md5sum's.
Step 5) Boot into recovery.
Step 6) Format /system (usually in mounts and storage menu option)
Step 7) Format /data
Step 8) wipe data and cache partition
Step 9) Did you do Step 6, 7, and 8? If not, STOP, do NOT proceed.
Step 10) Turn off Signature Verification. Select the Full Wipe ROM zip and flash.
Step 11) [OPTIONAL] If you want the Stock Theme, flash it now. Or, if there is a theme update package (orange), flash it now. NOTE: Flash only one of the themes.
Step 13) Good, now reboot and LET IT WAIT till everything is installed. Do NOT touch and mess around with any keys. Your installation went fine, if you see the bootanimation and then the touchkey lights up (dalvik cache being built) and then installing applications screen shows up. If the touchkey's don't light up you are hosed, bad flash, reattempt!! Same thing if the installing applications do not show up. If the above sequence of events do not happen, then your flash is borked, please look in the internal sdcard for the recovery log embryo-7-recovery.log, pastebin it.
Step 14) IMPORTANT Follow Any POST Installation stuff below.
POST INSTALLATION
Click to expand...
Click to collapse
Please do the following, after a full wipe installation. After the ROM boots:
1) Go to SuperSu and activate the app. (yes to update binary, Normal installation for the next prompt).
DOWNLOADS
Click to expand...
Click to collapse
Full Wipe ROM
Click to expand...
Click to collapse
Please check the MD5SUM for all downloads on YOUR phone (not on the PC e.g).
- [12-MAY-2013][7.0][FULL-WIPE] ATT-SGH-I727-EMBRYO-7.0-FULL.zip (google drive, thanks to ganja_guru, download), goo.im link (not reliable it appears). (md5sum: aba9905e7c2a1bd39d9305125913a844)
THEMES
Click to expand...
Click to collapse
IMPORTANT: Since the SecEmail/SecExchange are in /data partition, you will have to manually update the APKS, from ROMCustomizer-> APK Management -> Preload tab.
* [13-MAY-2013] [Orange Theme][Update-1]: Embryo 7 base theme, you can flash it during the full wipe install or later. EMBRYO-7.x-theme-orange-update-1-cwm.zip (md5sum: 03bf8577ccb6a3a1daab2fe17879d56f). Installation: just flash the zip in CWM, no other operations are needed.
* [12-MAY-2013] [Stock Theme]: Stock (OEM) theme, you can flash it during the full wipe install or later. stock-theme-EMBRYO-7.x-cwm.zip (md5sum: 463c0c0dd85b21e5c76fe4ab586793a3) Installation: just flash the zip in CWM, no other operations are needed.
KERNEL
Click to expand...
Click to collapse
Here are the Kernel links. Stock UCMC1 kernel (modified ramdisk) and Cymbaline 3.8, so you can flash back and forth between them in case of issues.
* [STOCK] UCMC1: KERNEL-sgh-i727-UCMC1-RD01-cwm.zip (md5sum: 3d1c2e2b0f0ae23510242cd0938a9b5a)
* [CYMBALINE-3.8] Bundled with the ROM.
CYMBALINE-JB-RD04-3.8.zip (md5sum: e8c00546b8d7ff868ceb766b0ee0b812)
PRELOAD PARTITION RESTORER
Click to expand...
Click to collapse
* [12-MAY-2013] The following CWM zip will restore your preload partition. You would need this in case you are restoring EMBRYO-7.x from a nandroid or you messed up the preload partition. In case of Nandroid restore, do it after you restored in the *same* session (that is flash it before you reboot). preload-restore-EMBRYO-7.x-cwm.zip
Please check the MD5SUM for all downloads on YOUR phone (not on the PC e.g).
ATT and Samsung Bloat
Click to expand...
Click to collapse
NOTE: This will not install the packages. You have to manually install, I chose this option so you can pick what you want to install. To select the packages to install go to Settings -> ROMCustomizer -> APK Management -> Select Bloat tab.
[13-MAY-2013][BLOAT PACK]: EMBRYO-7.x-ATT-SAMSUNG-BLOAT-cwm.zip (md5sum: ede3267db15c1568aa0a3c53f4f6db39)
Screenshots
Screenshots (embryo - holo orange theme)
Changelog
CHANGELOG
Click to expand...
Click to collapse
* [12-MAY-2013] Initial 7.0 Release.
* [13-MAY-2013] Embryo Orange Theme Update
- Fixed the WiFi in out indicator theme
Debug Logs
Providing Logs
Click to expand...
Click to collapse
Please make sure you either pastebin or zip it up and provide the link. Do NOT copy the log in the post.
Logs provide valuable information if you cannot replicate the issue. I am going to provide some tips on how to capture the logs.
Capture Logs If Rebooted and Stuck On Reboot Screen (adb skills required)
1) Some how get into recovery, using the key-combo or (adb reboot recovery).
2) In recovery -> mounts and storage -> mount "data"
3) Now, pull the whole logs directory:
Code:
/data/log
4) That's it.
Capture Logs Using CatLog
The above app features a recording feature. So you can capture the logs, during an issue (if you are able to reproduce it).
i) The app allows you to save and e-mail.
Thank you Mohan !
I always look forward to your hard work. Will try this now and respond.
ganja_guru said:
I always look forward to your hard work. Will try this now and respond.
Click to expand...
Click to collapse
AWESOME! I'd be interested to know the kernel features, if they are a close match to Cymbaline RD04 3.5
update from 6.11?
Hi Mohan,
WOW
Will there be an update from 6.11?
Meanwhile I'm backing up and downloading...
Thanks for your hard work man,
H
Followed OP to a tee like always. So far 2 flashes in , MD5 is fine on phone. Both flashes make it to the EMBRYO boot animation, but no captive keys light up.
I have to say I love the new boot animation. I let the phone sit for a good 15 minutes on the boot animation, and no changes. Back to 6.11 till more input comes back on EMBRYO 7.
Let me know if you guys have any issues regarding this. Thank you.
Another issue, restoring my nandroid 6.11, gives me an error "error while restoring /system! -- my default backup format has always been set to .tar (default)
However when restoring nandorids you get an error restoring system.... basically at this point I will have to do a fresh install of 6.11 again
All backups made with Sk8s CWMRTouch 6.0.2.7 14.4.6
unibombz said:
Followed OP to a tee like always. So far 2 flashes in , MD5 is fine on phone. Both flashes make it to the EMBRYO boot animation, but no captive keys light up.
I have to say I love the new boot animation. I let the phone sit for a good 15 minutes on the boot animation, and no changes. Back to 6.11 till more input comes back on EMBRYO 7.
Let me know if you guys have any issues regarding this. Thank you.
Another issue, restoring my nandroid 6.11, gives me an error "error while restoring /system! -- my default backup format has always been set to .tar (default)
However when restoring nandorids you get an error restoring system.... basically at this point I will have to do a fresh install of 6.11 again
Click to expand...
Click to collapse
Same here just have Cymbaline logo for last 15 minutes...I use TWRP.. something is wrong in file..
icythunder said:
Same here just have Cymbaline logo for last 15 minutes...I use TWRP.. something is wrong in file..
Click to expand...
Click to collapse
Good glad I am not the only one. What sucks is I can not restore my nandroid backup of 6.11 I just made ... so I am boned here, have to do a complete fresh install if that is the case.
Do you have any issues restoring your nandroids ?
If using TWRP maybe try clockwork? He DID say in the OP right? Just a thought.downloading now but it'll take like two hours...
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
kchen96 said:
If using TWRP maybe try clockwork? He DID say in the OP right? Just a thought.downloading now but it'll take like two hours...
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
I used clockwork to install EMBRYO 7, we are having the same issue.
Something is different on these builds with these nandroids... You can't restore them for some reason, errors out on restoring /system.
Doing a complete re-install of 6.11 now so I can use my phone... sort of makes nandroids useless though if you can not restore them. It's strange because I never had these issues restoring till after Embryo 6.5 or so, always errors on system
http://forum.xda-developers.com/showthread.php?t=2264240
or
http://forum.xda-developers.com/showthread.php?t=1777970
does it matter ?
unibombz said:
Good glad I am not the only one. What sucks is I can not restore my nandroid backup of 6.11 I just made ... so I am boned here, have to do a complete fresh install if that is the case.
Do you have any issues restoring your nandroids ?
Click to expand...
Click to collapse
Dont do nandroid just yet. I pulled out battery and rebooted and its working fine now..
installed via twrp in hercules.... but only system apps are loaded...
data and preload apps are not loaded.. somethings broke in the link....
reverted to aokp using nandroid....
icythunder said:
Dont do nandroid just yet. I pulled out battery and rebooted and its working fine now..
Click to expand...
Click to collapse
Can't do a nandroid if I wanted to, errors out. rebuilding phone yet again
I would love if anyone has a suggestion to why nandroids can not be restored (i've tried more then one) I would be all ears!
Thanks
unibombz said:
Can't do a nandroid if I wanted to, errors out. rebuilding phone yet again
I would love if anyone has a suggestion to why nandroids can not be restored (i've tried more then one) I would be all ears!
Thanks
Click to expand...
Click to collapse
Something to do with the preload I think....
Edit: Has ANYONE got it to boot successfully yet? My download is now at 161mb...Debating whether or not to start backing everything up
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
kchen96 said:
Something to do with the preload I think....
Edit: Has ANYONE got it to boot successfully yet? My download is now at 161mb...Debating whether or not to start backing everything up
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Yes I am using Embryo 7 fine. restored all my apps from play store just finished.. initially you will be stuck on Cymbaline for 15 min if so just pull battery and restart.. than its working fine.
My dl just finished and I got a popup from AVG that said "Virus found Android/Mobile Tracker"... Never seen that before... Hoping Mohan can let us know if there's something wrong with the file. Have any of the people that loaded the rom gotten any logs to Mohan so he can diagnose?
kchen96 said:
Something to do with the preload I think....
Edit: Has ANYONE got it to boot successfully yet? My download is now at 161mb...Debating whether or not to start backing everything up
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Used preload.zip, doesn't help with the nandroid restore. (restoring 6.11) I would love to restore my phone via nandroid, but none of them are working. It must be how the newer embryos are built.
Other nandroids that I have used in the past successfully .... 6.1 / 5.4 will not restore either... what is the issue here I wonder?
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I hope you enjoy the most customizable proprietary ROM available!
Features
The usual suspects
Stock kernel included
Rooted, unsecure boot.img
Zipaligned & zipaligns /data/app, /system/app, /system/framework at boot for you
Screenshot enabled with Power + Home
Extended power menu
Busybox with runparts (init.d support)
Bash command & nano editor
Only a few APKs removed for now
Unlimited browser tabs (well 255 technically)
SD readahead set to 2048
Added Talk2
Added Superuser3 Final
Added new Android Market (3.1.5)
Rosie Tweaks
Enable/disable Sense unlock animation (carousel effect)
4 column app drawer or 5 column app drawer (configured in Tweaks)
disable/enable paginated app drawer
Transparent apps drawer
Statusbar Tweaks
Custom Extended settings with an extra Ringtone slider
Ability to hide recent apps in pulldown (hidden by default)
Clock options (colors/am pm settings/hide)
Signal options (color/dbm text/hide)
Battery options (text/automagically colored text based on battery level/hide icon)
Choose between showing H or 4G in the statusbar
hide any extended settings you don't want!
center clock!
quick-quick settings option (automatically turn to settings when no notifications to clear)
Other Additions
My permissions init.d script (fixes most permissions on each boot)
Added mod version to settings display
Added tweaks shortcut to settings
Added Bloater - will become more populated with items over time, check it once a week
CRT Animations (with ability to toggle which you want, screen on/off)
Overscroll (ability to toggle off/glow/bounce/bounce+glow) - enable in tweaks
Toggle screenshot on/off - your choice
EXT 4 optimizations
Improved JPEG quality
Improved overall UI smoothness
Hardware GUI rendering
many many more tweaks!
Bugs
I am not aware of any bugs at the moment. Please report any you may find!
RAM
I've seen lots of users complain about how little RAM some ROMs have. RAM does not mean speed. It does not determine how fast a ROM is. It simply means how many apps you can have open at once without Android having to close another one. Have you ever filled up the amount of RAM your device allows?
Android is built to use RAM efficiently. Let it handle it. Don't worry about RAM. This ROM has about 190mb free running the Sense launcher out of the box. The more apps you have installed the less that number becomes over time. Don't pay so much attention to it and just enjoy your phone.
Change Log
Code:
[u][B][SIZE="4"]0.2.2[/SIZE][/B][/u]
- fix FC when pressing enter on certain fields
[u][B][SIZE="4"]0.2.1[/SIZE][/B][/u]
- fix FC on fields that have auto-completion/suggestions
[u][B][SIZE="4"]0.2 - Oct 8[/SIZE][/B][/u]
[LIST]
[*]Added overscroll animations
[*]Added screenshot with power + home & toggle for it in Tweaks
[*]Added advanced power menu
[*]Added Android lockscreen
[*]Added my Honeycomb lockscreen
[*]I think that's it for this version
[*]changed screenshot location to /sdcard/screenshots
[*](depink coming in next version I guess)
[/LIST]
[u][B][SIZE="4"]0.1 - Sep 27[/SIZE][/B][/u]
-initial release
Screenshots
Credits
-cyanogenmod
-dsixda - HTC kitchen which makes things so easy for us
-modaco - CWM & initial base (thank you paul!)
Install Instructions
Make sure you are using Modaco's 4.0.0.9 CWM!
If this is your first custom ROM be sure to format /system in recovery!
Make a nandroid backup. Losing 10 minutes of your life is easier to cope with than losing a phone
Download, match MD5 tags, copy to SD card
Reboot into recovery
OPTIONAL: wipe/factory reset. I highly recommend doing this when coming from a different ROM, that said it's your choice. Please don't report bugs if you have not wiped.
Install ROM from zip.
Reboot, wait ~20m,
Download
Bulletproof 0.2
md5: 4d7b63066dbc9579dbbb28c0d3e8deee
Bulletproof Doubleshot 0.2+ => 0.2.2 Upgrade
I suggest you also install Bloater, it complements this ROM VERY nicely.
Mods & Addons
None yet!
Graphics, etc
thanks MMoodyB!
Code:
[PLAIN][URL=http://forum.xda-developers.com/showthread.php?p=17388251][IMG]http://i.imgur.com/SfL1q.png[/IMG][/URL][/PLAIN]
PS> The name is still debatable. This is your ROM as much as it is mine. I'm always open to suggestions, feature requests, and more!
For science!
Grayed out items have not YET been implemented.
error in sdcard/bulletpoof_doubleshot_0.1.zip
(status 0)
Installation Aborted
Tried installing this several times. I am running the correct recovery menu, and I redownloaded this file several times. Just thought you might want to know.
darkphoenix2012 said:
error in sdcard/bulletpoof_doubleshot_0.1.zip
(status 0)
Installation Aborted
Tried installing this several times. I am running the correct recovery menu, and I redownloaded this file several times. Just thought you might want to know.
Click to expand...
Click to collapse
Hmmmm, I was able to flash this just fine, tested it a couple times just to be sure.
Are you using Modaco 4.0.0.9 recovery? And have you formatted /system in modaco recovery?
I had to do both of those steps before I could get it to properly flash.
Flashed it. Excellent modification options! Love the boot animation.
One problem though:
Getting error on installing/updating apps through Market 3:
Error
Error downloading "...". There is insufficient space on the device. Any advice on how to solve it?
N1LOY said:
Flashed it. Excellent modification options! Love the boot animation.
One problem though:
Getting error on installing/updating apps through Market 3:
Error
Error downloading "...". There is insufficient space on the device. Any advice on how to solve it?
Click to expand...
Click to collapse
Try wiping /cache & dalvik-cache in recovery.
Also, you may have to start over with a /data wipe (Titanium backup ftw)
This is awesome. I loved your Trigger roms for the vibrant. I can't wait to try this out.
Yes I'm on that recovery, and I manually wiped every wipe option prior to attempting to install. I'm getting the same error message repeatedly. I have no idea, as I've tried both recoveries.
darkphoenix2012 said:
Yes I'm on that recovery, and I manually wiped every wipe option prior to attempting to install. I'm getting the same error message repeatedly. I have no idea, as I've tried both recoveries.
Click to expand...
Click to collapse
And the downloaded file has the same MD5 as the one posted? Just wanna make sure it's not the problem...
Romanbb said:
Hmmmm, I was able to flash this just fine, tested it a couple times just to be sure.
Are you using Modaco 4.0.0.9 recovery? And have you formatted /system in modaco recovery?
I had to do both of those steps before I could get it to properly flash.
Click to expand...
Click to collapse
I've wiped dalvik battery stats system data cache, etc.. Everything has been wiped aside from the sdcard its self. I'm backing my card up, and going to try reformatting the sdcard, and see if possibly that could help somehow. Any ideas?
darkphoenix2012 said:
Yes I'm on that recovery, and I manually wiped every wipe option prior to attempting to install. I'm getting the same error message repeatedly. I have no idea, as I've tried both recoveries.
Click to expand...
Click to collapse
Are you able to flash other roms beside this?
Cool. Trying it out when I get back home. I went over my 2 gb high speed lol.
Romanbb said:
Try wiping /cache & dalvik-cache in recovery.
Also, you may have to start over with a /data wipe (Titanium backup ftw)
Click to expand...
Click to collapse
Still getting this same error...
_____________________
Fixed
I had to delete some files in cache by myself using root explorer which I installed using adb.
Romanbb said:
Hmmmm, I was able to flash this just fine, tested it a couple times just to be sure.
Are you using Modaco 4.0.0.9 recovery? And have you formatted /system in modaco recovery?
I had to do both of those steps before I could get it to properly flash.
Click to expand...
Click to collapse
Formatting my sdcard using the recovery options seems to have solved this. My guess would be I didn't have a proper ext system in place, although I never got any errors before. I hope this helps anyone else in the same boat. For any other problems out there, maybe try this as a last resort.
Thank you for the support guys! This rom is awesome!
is it possible to run the no sense script on this rom?
chrispaw said:
is it possible to run the no sense script on this rom?
Click to expand...
Click to collapse
Not sure... probably but stay away from it for a day or two. Tomorrow or Friday I will add a "removal procedure" to Bloater. You'll be able to go down a list and remove chunks of Sense at a time. I have a similar procedure on my Sensation ROM.
Thanks Roman! Always nice to have another dev offering support for our device! Hopefully we can get source code soon so things can really continue to jam!
is this rom stable
Hi romanbb,
I would recommend some changes in the updater-script. This would it make easier for some users to flash.
First i would format the system partition:
format("ext4", "EMMC", "/dev/block/mmcblk0p22");
And for mounting the data and system partition I would recommend the new updater-script format:
mount("ext4", "EMMC", "/dev/block/mmcblk0p22", "/system");
mount("ext4", "EMMC", "/dev/block/mmcblk0p23", "/data");
Maybe this will help some users with flash problems.
That wont work chris. This recovery doesnt recognize ext4 it only does ext3. Trust me ive tried.
Sent from my MyTouch 4G Slide using xda premium
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Youtube video of broodROM RC4
- Features for broodROM RC5 -
You can find a download link on the 2nd post
- I9001XXKQB (KPL) (Android 2.3.6)
-- 1 Odin package with recovery hang fix included
-- Rooted
-- Deodexed
- FeaMod Recovery v1.4 Fixed (based on CWM Recovery v5.5.0.4)
-- The fixed one, no hangs in recovery or bootloops
- Skyhigh Kernel v1.4d OC/UV
-- Thunderbolt Integrated
-- Set to 1.4GHz using Virtuous OC Daemon
- Script: /system/etc/init.d/01broodrom
-- Choose a CPU Profile or set a manual CPU configuration
* Battery Saving Profile / Balanced Profile / Performance Profile
-- Set I/O Scheduler
-- Set SDcard Read_ahead
-- Set Dalvik Heapsize
-- Enable/Disable Media Scanning
-- Enable/Disable Bootanimations
-- Enable/Disable Special Bootanimation
* Enable DMESG Unix output / LOGCAT as bootanimation or use the original (AOSP) library
-- Enable/Disable Google Error Reporting
-- Enable/Disable Battery Tweak (dirty * centisecs)
-- Change LCD Density (May cause market/app errors)
- Scripts: /system/etc/broodrom_scripts
-- auto_calibrate_battery
-- defragment_databases
-- factory_reset
-- fix_permissions
-- hard_reset
-- wipe_dalvik
-- zipalign_apps
- WiFi Tweak:
-- Connection stability tweak (WiFi connections with poor signals are better supported)
- WiFi Fixes (when you still have crappy WiFi)
-- Additional WiFi packages: KQ1 Modem / KQ1 WiFi Binaries
-- Additional App: FXR WiFi fix and rescue (last resort app, only use if the rest doesn't work)
- ICS Theme v4.0.1 by Reneph/RavoxX including:
-- Extended Power Menu with Screenshot function
-- Modded KQB Lockscreen (changed default wallpaper, no swipe to unlock message)
-- Lock animation: Shutdown-style Old TV
-- Smooth Spinners
-- SMS/MMS Mod
-- Camera Hack
-- "ICS Layout" Settings menu
-- ICS Grey Keyboard (by fadzlihellmuth)
- Additional ICS Theme Tweaks:
---- SystemUI.apk
-- Swipe to Remove Notification
-- Extended Status Bar 13 Buttons
-- Removed Battery Charged Notification
-- Custom Label in Statusbar (can be changed with nifty little app)
---- framework.jar
-- Disabled ScrollingCache (Smoother Scrolling)
-- Swipe to Remove Notification
---- framework-res.apk
-- Added more Auto-Brightness levels for more efficient brightness
-- Changed Default Wallpaper (also lockscreen one)
- Two Launchers:
- Go Launcher EX 2.86 with ICS Theme of kovdev
- Touchwiz 4
- Custom Boot Animation support, ICS boot animation (sanim.zip)
- No Adds (hosts file) (upd. 22 April)
- Default i9001 boot sound but 50% less volume
- Samsung Galaxy W GT-I8150 GPU Drivers
- Cyanogenmod APN List (All providers)
- Serious GPS Tweak (improves GPS allot)
- Beats Audio Lite
- Busybox
- Default Removed Bloatware:
-- Aldiko
-- Allshare
-- Beach
-- Buddies Now
-- Days
-- Dual Clock
-- Genie Widget
-- HRS Hotels
-- Info Alarm
-- Kies Air
-- Layar
-- Mini Diary
-- Music Hub
-- Press Reader
-- Pro Tips
-- Samsung Apps:
--- Widget Clock
--- Program Monitor
--- Stock Clock
-- Samsung Service App
-- Talk
-- Talkback
-- Thinkdroid
-- Unified Inbox
-- Write and Go
- Updated all stock apps to latest version excluding
-- Replaced TouchWiz Calculator with a more expanded one
-- Google Play is not updated because it caused errors in RC4, let it auto update
- Build.prop tweaks:
-- 3G Tweaks
-- No black screen when calling bug
-- No call out delay
-- Power saving tweaks
-- Better responsiveness
-- Set default screen brightness
-- New Dalvik flags
-- Better Reception
-- Quickboot
- Installation for broodROM RC5 -
1. If you have CWM installed: format all partitions. If you don't have CWM installed do a Hard Reset (*2767*3855#) Note: A hard reset also wipes your sdcard, make sure you got it backed up
Note: A format or hard reset is not always needed, you can always try to keep your data folder and flash broodROM RC5, wiping dalvik cache is still needed!
2. Put your phone in download mode (when off hold: vol -, home, power)
3. Start Odin, Choose AriesVE.ops file, check "One Package", choose: "broodROMRC5.tar.md5" > Click Start
4. Wait till the process is complete, now your phone will reboot and show you recovery mode, now choose reboot system now by pressing the menu button
5. Set animations to a few. (settings > display > animations) For the shutdown-style old TV animation and start enjoying your new rom
DISCLAIMER : FLASH AT YOUR OWN RISK. I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE
Donations
If you really like the broodROM and/or Galaxy S Plus Configurator development you can consider donating me.
I really appreciate the donations, and I really want to thank the people who donate me
All donators will have instant access to all pre-releases and private beta's
Many thanks to the following people who donated me!
Leeon Wong Wong - €10,-
KoekwousNL - €5,-
t_raven - $10,-
dagothe9 - $5,-
J.A.T. Pajuelo - $5,-
L Sangiovanni - $10,-
S Petropoulos - $5,-
Dan - $20,-
tormentured - $7,-
cyclistefou - $10,-
geo_xar - $14,-
ManEater - $5,-
1009i - $5,-
J. Scharf-Brueck - $5,-
F.Hecker - $5,-
J.Sikken - €25, -
Latest version: RC5
Download: here (odin)
Download: here (cwm backup)
Download: here (additional tools and fixes)
Addons
WiFi Patch (KQE Binaries):
http://www66.zippyshare.com/v/35023232/file.html
Arabic Patch (beta)
http://www8.zippyshare.com/v/84760912/file.html
Revision 2 (beta)
http://www64.zippyshare.com/v/32115967/file.html
- Download page with all versions (sourceforge) -
https://sourceforge.net/projects/broodrom/files/
- Download page with all versions (importanic.ch thanks to Fr0zen1977!) -
http://broodrom.importanic.ch/
- Download page with all versions (mooo.com thanks to loonyhack!) -
http://broodrom.mooo.com/
broodROM RC4 FAQ
Q: I kinda like Apple, and I don't want an android pissing on an apple as bootlogo
A: Well.. this is only a custom boot logo, you can easily change it by reflashing the SkyHigh v1.4 Kernel
Q: I want to install a system accelerator like Thunderbolt or Adrenaline shot
A: Don't do that! The SkyHigh v1.4 kernel already includes an integrated Thunderbolt, adding more tweaks would simply bootloop your phone
Q: I saw the screenstate_scaling script in /system/etc/init.d, what's up with that?
A: screenstate_scaling is an addition to Thunderbolt, in this script the default awake & sleep governors are set, this script can function as an alternative to CPU Master. You will notice that CPU Master will give you a warning each time you boot your phone since the screenstate_scaling script will interfere with it.
Q: I noticed that you have set the sleep governor to ondemand, why is that?
A: I did that because I've experienced some alarm clock fails on 100Mhz, Of course you can try it out yourself, it might work just fine
Q: I want a better battery life for your rom! How can I achieve that?
A: You can perform the following steps to gain a better battery life: first thing is to lower the CPU Frequency, the default is 1.8GHz, but you can set it to 1.4Ghz (or so) with Antutu CPU Master. The second thing is that you can set the sleep governor to "powersafe" (can be found in screenstate_scaling script) this sets the phone in an even lower state and safes you battery (see the question above for the possible risks)
Q: I want to change my kernel, how do i do that?
A: I recommend you to not change your kernel since Skyhigh gives the best performance for broodROM RC4. Although you can download an alternative kernel and place it on your /sdcard, then reboot in recovery using the extended power menu and choose install zip from sdcard > install zip from internal sdcard > choose the zip file > install > reboot.
Q: My browser FC's all the time, how do I fix this?
A: Some people experience browser FC's, you can easily solve this by installing the broodROM_RC4_InetFixes.zip in recovery mode, don't forget to mount /system to be sure it installs correctly.
Q: My WiFi has constant drops, how do I solve this problem?
A: The first thing that you need to investigate is your "DHCP Lease Time" you can find this option in your router, if it's set to a low number please change it (mine is 604800). If this doesn't solve the problem you can try installing the KQ1 Modem using Odin (select AriesVE.ops from broodrom rc4 and choose the .md5 file as "Phone" package) and install the KQ1 Wifi Binaries using Recovery mode (also don't forget to mount /system) If you still encounter WiFi problems you will have to wait until the ICS Value pack release so i can permantely fix it.
Q: I saw the "Module Loader" app. what is this? and what can it do for me?
A: The module loader app is an app that allows you to run additional modules for your i9001. You can load several modules, I added the tun.ko module which is OpenVPN, the cifs.ko module which is Samba Shares Support (smb://) and the PPP Modules. If you are sure you will never use any of those you can delete the app by deleting "moduleloader.apk" file in /system/app
Q: I noticed that there are some bugs regarding the ICS Theme, some apps have gingerbread looks
A: You can solve this problem by downloading the newest ICS Theme and extract "framework-res.apk" and "twframework-res.apk" from the archive, then copy them from your sdcard to /system/framework and overwrite the current files, set the permissions to RW-R-R and reboot.
Q: I want to change the bootanimation, how can I do that?
A: I've chosen to keep the sanim.zip layout instead of bootanimation.zip which is default for SkyHigh v1.4. So you can place your bootanimation (named sanim.zip) in /system/media, set permissions to RW-R-R and reboot
Q: Is your Configurator BETA 4 compatible with broodROM RC4?
A: Yes and no, you cannot flash themes or mods, but you can use things such as changing boot animation, changing dns, updating hosts and so on (all things that include theme files are not compatible with broodROM RC4)
Q: I cannot buy apps from the store. how can i solve this?
A: Wipe the play store cache by going to settings > Applications > Manage apps > All > Play store > clear cache (thanks to nail16)
If this doesn't work, download an older version of the market here and delete /system/app/Google_Play_3.5.1.5.apk then place the market apk in /system/app and reboot (set permissions to RW-R-R) The market will now automatically update to the latest version.
Q: I cannot change the background of my lockscreen, why is that? I want to change it!
A: The lockscreen from KQ7 is a beta and does not support custom wallpapers yet. Although you can change the lockscreen by looking in the framework-res.apk file with Winrar, look for "framework-res.apk\res\drawable-hdpi" then you will find the "zzzzzzzz_default_lockscreenw.jpg" file at the bottom, You can replace that file by dragging your custom 480x800 lockscreen in there. set the compression level to "store" and put the framework-res.apk file on your /sdcard, copy it to /system/framework and overwrite the file. Don't forget to set the permissions to RW-R-R
(this also seems to work on the default way of changing the lockscreen background )
Q: I get random reboots, help?
A: Because all i9001 devices are not actually exactly the same, some devices could cause errors when using a support OC/UV kernels, you can flash the SkyHigh v1.3 kernel or Feacore 1.4 NonOC to prevent this problem.
Q: I have sdcard fails, how can I solve this?
A: the developer of the SkyHigh kernel is currently working on a fix, you can read about it here
Q: Where can I get additional information about the kernel?
A: You can find it in the SkyHigh Kernel Thread
Last update: 31-03-2012
More to come!
- RC5 Screenshots - (new)
Thanks to Coertmans for uploading the screenshots
thank you so much dude!! i was just about to flash the ori xxkps rom. u rocks!!
List of fixes for RC5 that will be included in Revision 2 patch:
USB Settings force close
Ram consumption (probably dalvik flags)
Fixes for 01broodrom
Fixes for broodrom_scripts scripts
Swipe error (not sure about this one, only 1 person reported it)
More? Please let me know
List of features that will be added to Revision 2 patch
Very extended guide on how to use/configurate broodROM RC5 Revision 2
New ICS Style status bar
Toggle 2G mod
broodplank1337 said:
For the people who want a clean and fast ROM without crap!
This ROM allows all kinds of customization.
When this ROM is installed it will look like a clean install of a stock ROM.
But will include these features:
- I9001XXKPS (Android 2.3.6)
- CWM Recovery v5.0.2.7. based FeaMod Recovery v.1.3 without OC/UV
- Rooted
- Deodexed
- Zipaligned
- Custom Boot Animation support (sanim.zip)
- Extended Power Menu
- AOSP Lockscreen
- Custom Battery Icon
- Lock animation: Shutdown-style Old TV
- Adrenaline Shot 13
- Samsung Galaxy W GT-I8150 GPU Drivers
- Removed Apps:
* Aldiko
* AllShare
* Beach
* Budies Now
* Days Widget
* Dual Clock Widget
* Genie Widget
* Info Alarm
* Kies Air
* Layar
* Mini Diary
* Music Hub
* Press Reader
* Pro Tips
* Samsung Apps:
- Calendar Clock Widget
- Program Monitor Widget
- Stock Clock Widget
* Sim Toolkit
* Talk
* Talk Back
* Think Droid
* Unified Inbox
* Write and Go
- Extra Apps:
* Superuser
Installation Instructions:
1. Open Odin and click "OPS", now choose the AriesVE.ops file.
2 Check "One Package" and select the "XXKPS_Performance_EditionRC1.tar.md5" file as the one package file
3. Click Start and wait until the process is done.. (may take 7 to 25 min)
4. Once your in CWM choose Reboot
5. The first start might take a while... Enjoy XXKPS Performance Edition RC1
Don't forget to set animations to a few for the shutdown-style old TV animation
Note: For some reason I couldn't add custom apps to the ROM without gettings FC's so I decided to leave them out.
Download the following apps after flashing the ROM:
* Root Explorer
* Terminal Emulator
* Adfree Android
Click to expand...
Click to collapse
is it greek language support with sms writing?
thanksssss
mikrokatevas said:
is it greek language support with sms writing?
thanksssss
Click to expand...
Click to collapse
yep its supported
I test it now !
cool dude!
cud u make an odin flashable for cranium rc5?
sakindia123 said:
cool dude!
cud u make an odin flashable for cranium rc5?
Click to expand...
Click to collapse
I could if it was working on my phone, I've tried installing it over 10 times but still get black screen unfortunately
broodplank1337 said:
I could if it was working on my phone, I've tried installing it over 10 times but still get black screen unfortunately
Click to expand...
Click to collapse
thanks very much....
have anyone try it ?
give us your opinions.....
thanks again
I have a problem after flash in download mode. "Installation aborted".
Alex93917 said:
I have a problem after flash in download mode. "Installation aborted".
Click to expand...
Click to collapse
did you make factory reset afterwards?
what is Terminal Emulator? is it a must to install?
broodplank1337 said:
I could if it was working on my phone, I've tried installing it over 10 times but still get black screen unfortunately
Click to expand...
Click to collapse
crap...........cud u give some instructions to how-to?i will pm it to someone wjo installed cranium rom
mikrokatevas said:
thanks very much....
have anyone try it ?
give us your opinions.....
thanks again
Click to expand...
Click to collapse
Im not talking about my ROM but about Cranium RC5, my ROM should work just fine.. tested it myself
sakindia123 said:
crap...........cud u give some instructions to how-to?i will pm it to someone wjo installed cranium rom
Click to expand...
Click to collapse
I will PM u instructions
mikrokatevas said:
did you make factory reset afterwards?
Click to expand...
Click to collapse
Yes. But, now, it's working ! Good work !!! Thank you.
Sent from my GT-I9001 using Tapatalk
Alex93917 said:
I have a problem after flash in download mode. "Installation aborted".
Click to expand...
Click to collapse
When u just reboot it's gone
Anyone tested this ROM in AnTuTu?
I will take a test in ten minutes.
---------- Post added at 01:43 PM ---------- Previous post was at 01:26 PM ----------
So, this is a Antutu Test report.
Uploaded with ImageShack.us
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
v2.0.04 EL30 - 2012/02/05
BML(EXT4/RFS), MTD(YAFFS2) Compatible - NON-WIPING
Featuring ShadowKernel 2.0+(BML)/3.0+(MTD)
Stable, fast, sport tuned stock - See what's included below!
DISCUSSION FOR v2.0.04 STARTS ON Page 27 »
DOWNLOADS
Full Featured Odexed 2.0.04 » SleeperROMv2.0.04-EL30-Full-odex.zip
File size: 223.8 MB / MD5 04d7fcf4db9120109391a601fec7425e
Slim Essentials Odexed 2.0.04 » SleeperROMv2.0.04-EL30-Slim-odex.zip
File size: 175.54 MB / MD5 9ed7c791e6f7f278ea414f85bec532d8
KNOWN ISSUES / NOTES
- First Boot Installer sometimes fails to complete (usually completes on reboot)
On first boot, unlock the screen and let it sit until
you see all the media scanning notifications stop -
this is because on first boot, there will be some
app installing going on for the apps included, will take about a minute.
If you're coming from a clean install, you will have to set
Swype as your text input in Settings > Locale and Text Settings to start using it.
File system (BML/MTD) SleeperROM will retain your existing EXT4 or YAFFS2(MTD) partition configuration,
but will convert RFS to EXT4 (journaled).
It will otherwise not do any conversion.
MODS / PATCHES / FIXES / TOOLS
Odexer Tool (BML/MTD)
You can use this tool to odex/reodex any deodexed touchwiz rom (not CM or MIUI).
Make a nandroid backup just in case. Based on the odexer tool by Vampyrex13
DOWNLOAD MOD_CWM-ReOdex-20120208.zip
File size: 1.3 MB / MD5 b3b91b9cc60413c1607d015a2360f67d
ROM CHARACTERISTICS
Samsung Touchwiz EL30 Official / Android 2.3.6
NO CarrierIQ | Odexed | Non-Wiping | Superuser | Busybox 1.19 Complete | Bash 4.1
ShadowKernel 2.0+[BML]/3.0+[TW MTD]
Supports: bootanimation.zip, init.d scripts, RFS/EXT4, CIFS, TUN, Netfilter TCPMSS, Overclocking 100Mhz-1.4Ghz, Undervolting
CWM3 / CWM5 Ready
- Preset IO Scheduler/CPU Governor/Clock Speeds to SIO/ondemand/100mhz-1000mhz
- EXT4, RFS, Yaffs2 Compatible
- SDCard speedup
- v6 Supercharged - Update 9 RC 3.2 (Preset to "512HP balanced + HTK", Script included at /system/xbin/v6_supercharger.sh for your convenience - use with script manager or Android Terminal Emulator (first enter su to elevate privilege to root)
- Tweaks similar to Adrenaline
- Battery Saving Mods
- Zipaligned/Zipalign on boot
- build.prop tweaks
- Bash 4.1 Shell Environment More Info
APPEARANCE
- Stock Touchwiz Gingerbread theme
- Stock Galaxy S Bootanimation (no kernel boot ani, no sprint ani, no startup/shutdown sound, no shutdown ani)
- CRT OFF Animation
- ICS Transition Animations
- Green Overscroll (GB Status Green color)
- Battery 1% Mod (GB Stock Battery with 1% increment numbers)
- Stock Sprint service status icons (1x, 3g, wifi corrected)
AppWidgetPicker (groups widgets)
LiveWallpaper Picker
AOSP, Samsung, HTC Stock Sounds for your pleasure (minimal in "Slim")
FIXES / MODS
- Auto-brightness Levels Adjusted to save battery
- turbo auto-rotate lag fix
- 1x/3g fix
- LogsProvider SMS removed
- Extended Power Menu (Shutdown, Reboot, Recovery)
- Voodoo Sound & Color [Voodoo Control included]
- Volume Rocker Mod (Sound > Vibrate > Sound Off)
- Keyboard Skips Fixed
- GPS Fix
- Hotspot Hack (EL30 port - Toadlife, EI22 port - Tortel, Mod - Necrosan)
- Camera Low Battery fix, Silent mod
- Scrolling Status Toggles [thanks toadlife for keeping this one alive] - To modify settings, use the included QuickPanel Settings app
- Sprint Proxies Removed
- Automatic Battery Calibration
INCLUDED APPS
* = retained in the slim version
Stock/System Apps
*ADW Launcher , *Talk , *Market (updated)
Allshare , Memo , MiniDiary , Tasks , *Samsung Keyboard
*Custom Android Terminal Emulator
Removable Goodies:
*Swype beta , *QuickPic (replaces Gallery)
*AnTek Explorer , *XDA App , *SMSPopup , TinyFlashlight
Dolphin HD Browser (stock browser included)
KiesAir
ThinkFree Office
Unit Converter
*GMail , *Google Maps , Google Translate ,
Google Voice , Youtube , Google Gesture Search
*Voltage Control , *Voodoo Control
*AdFree (included so you have the option to kill ads or not - host file is not modified by default)
Elixir2 , GPSTest
MOD SOURCES
» http://forum.xda-developers.com/showthread.php?t=1466668
This ROM works with EC05 and EI22 modem, but runs MUCH better with the EL30 modem
TODO:
CHANGELOG
2.0.04 02/05/2012
- Now Odexed for memory savings in RAM and /data
- Modified init scripts
- Included EI22 Video Player apk (has extended settings)
- Included EI22 Email apk
2.0.03 01/31/2012
- Scrolling Status Bar mod, Thanks toadlife for keeping this one going
- Fixed Camera FC
- Updated Flashlight app
- Firstboot installer reliability improvements (still not perfect, may need a reboot to complete)
2.0.02 01/29/2012
- Fixed installer
- Updated apps: Market, Maps, Goggles, Google Search, Voice Search, TalkBack/KickBack/SoundBack (accessibility), Superuser/su, Titanium Backup, Tiny Flashlight
- Included PacMan from CM7 To install/uninstall gApps on first Market load
- Replaced ES File Explorer with AnTek Explorer
- Updated Bash 4.1 Environment
- logsprovider (sms in phone logs) fix, thanks bbelos
- removed SprintZone, Qik some other bloat
- Added Microbes live wallpaper, Google Gesture Search
- Reduced file size
2.0.01 - 01/26/2012
First upload
- optimized sqlite
- hotspot hack (toadlife)
- bash 4.1 environment
- debloated
- Galaxy S Stock boot anim
- 1x/3g mod
- Volume Rocker mod (Sound On/Vibrate/Sound Off)
- Battery Full Notification removed
- Rotation Lag Turbo fix
- battery 1% mod
- Auto-Brightness Level Mod
- Green Overscroll
- ics transitions
- CRT OFF
- Extended Power Menu
- Camera Low batt/Silent Mod
- Swype Beta with Dragon Dictation
- tcp linux tweaks http://forum.xda-developers.com/showthread.php?t=1346680 marcusant
1.x.xx EI22 (no longer maintained) » http://forum.xda-developers.com/showthread.php?t=1345896
Standing on the shoulders of giants - THANKS TO
bbelos for all his help and debugging, deodexing, and of course ShadowKernel
toadlife
QBKing77 for the great reviews and tutorials
k0nane
DRockstar
nubecoder
RandomKing for his AIO mods work
Darkyy for the Zipalign
zeppelinrox for the v6-Supercharger script
untermensch, Sicopat, Toadlife for their work on the Extended Power menu
earthboundIAP
mkasick
Chris41g
randomking
Thanks to Chris41G for the rotation lag fix Mod.
Thanks to Necrosan, Tortel1210 for the wifi tether Mod
Kennyglass123
Hoffman1984
the community as a whole without whom my phone would be just awful, the people who install and use the rom and push for constant improvement and sorry if i forgot anyone!
Thanks for the Donations!
You know who you are, sorry if i respond late to your donation receipt or not at all, they've been getting auto-archived in gmail!
In no particular order:
Csundara
davidrools
ewolfr
Rick
Brandon.d
CameronJ
Wolflingdaddy
revsnet
Installation
Boot into recovery: Three Finger Salute (Camera + Vol Down + Power)
OPTIONAL: Wipe all the things (Wipe Data/Factory Restore, then, "Mounts and Storage" > Format /system (be careful - DO NOT format your SD card)) - ! don't wipe if you're installing an Incremental update ¡
Install from Zip, Choose SleeperROMv2.x.xx-EL30-[Pkgversion].zip
Reboot. First boot may take up to 3 minutes while the dalvik cache is built for the first time.
If you don't have recovery/are on stock OTA EL30, Flash the BML/Odin ShadowKernel/CWM5 Root combination in Odin
http://forum.xda-developers.com/showthread.php?t=1465033
***CLEAN INSTALL
1. Backup with Titanium Backup, then a CWM Backup.
2. In CWM, go to "Mounts and Storage" > "Format /Data", just once will do.
3. To restore your basic data with Titanium Backup, avoid Batch Restore for system apps, choose the Green items one by one for the feature you want to restore then reboot. - I usually Sign In to my google account (open market,gmail,talk) then restore [CONTACTS/CALLS], [VOICEMAIL], [SMS/MMS/APN], [BOOKMARKS], and if i'm feeling daring and lazy [SETTINGS/BLUETOOTH..] - but this last one usually causes me FC grief. After a couple of reboots, you can batch restore all of your user apps.
ABOUT LOCKSCREEN MOD (or lack thereof) TSMParts may be integrated in the near future but NOT the lockscreen mod, as it goes against the philosophy of this rom in maintaining stock appearances (exception is scrolling status bar) while featuring the latest patches and mods which enhance usability and stability. The standalone lockscreen mod flashable is NOT compatible with this ROM.
qbking77's How-to video | qbking77's Review of SleeperROM
Excellent. Gonna flash this right now.
Second thanks a lot for all your hard work! Gonna try it out now
Sent from my SPH-D700 using Tapatalk
bbelos said:
Excellent. Gonna flash this right now.
Click to expand...
Click to collapse
Let me know how it goes, I did a lot of testing back and forth between RFS/EXT4 this time around but haven't done much with MTD, so if it worked before it should work now...
I just realized wifi may be broken on the MTD version, uploading the update now (10 minutes)
Sensei!!! Wooot. Downloading now to try out. Hey, I see it says MTD. How do we make it MTD? Is there a script or is it setup to do that automatically?
bit1 said:
Sensei!!! Wooot. Downloading now to try out. Hey, I see it says MTD. How do we make it MTD? Is there a script or is it setup to do that automatically?
Click to expand...
Click to collapse
I would hold off on MTD for now. I'll make sure it's working. Right now giving me some fits.
bbelos said:
I would hold off on MTD for now. I'll make sure it's working. Right now giving me some fits.
Click to expand...
Click to collapse
Will do bbelos. Thanks.
Yea. I flashed the regular one and it's rebooting over and over on me after a minute or two. I'll just go back to stock for now or try reflashing Sensei
1. This does not install EL30 modem.
2. Mine reboots in a loop on startup.
Coming from Sleeper 1.1.02a I wiped all the partitions and installed the .zip. First time I was stuck on samsung screen. Wiped again, installed again. This time I was stuck at the galaxy S boot animation screen, it would keep looping. Installed .zip again without a wipe and Still stuck at the boot ani screen. I'm going to go back to a nanroid backup of 1.1.02a for now.
EDIT:
After restoring my nanroid back up of 1.1.02a I tried to install 2.0.01 over it with out wiping anything....and it worked!
That's the first time NOT wiping has fixed an issue I had when installing a rom?
Running good no problems so far! But I don't have a scrolling status bar anymore? Also sprint zone is on here, how can I remove that?
syntax_erorr said:
Coming from Sleeper 1.1.02a I wiped all the partitions and installed the .zip. First time I was stuck on samsung screen. Wiped again, installed again. This time I was stuck at the galaxy S boot animation screen, it would keep looping. Installed .zip again without a wipe and Still stuck at the boot ani screen. I'm going to go back to a nanroid backup of 1.1.02a for now.
EDIT:
After restoring my nanroid back up of 1.1.02a I tried to install 2.0.01 over it with out wiping anything....and it worked!
That's the first time NOT wiping has fixed an issue I had when installing a rom?
Running good no problems so far! But I don't have a scrolling status bar anymore? Also sprint zone is on here, how can I remove that?
Click to expand...
Click to collapse
Not sure what in blazes is going on here but this method worked. I restored my backup, wiped NOTHING and flashed and good to go. My OCD made me go back and wipe dalvik and cache but it was running and is running just fine now.
I tried flashing from the EL30 Odin package. I went through the process of rooting and getting CWM 5.0.2.7. Before flashing SleeperROM I wiped cache and dalvik cache, it took a long time to boot (fully expected), but once it did boot it was just FC after FC and I had no status bar... I will try a clean install later but for now I went back to Stock EL30.
If anybody can see the flaw in what I did I would appreciate the insight.
Home/ search soft keys
I installed this ROM and now my home/ search soft keys vibrate but don't do anything.
Could this be something my last ROM screwed up or is anybody else having this issue?
**EDIT-
This was after having installed this ROM over MTD CyanogenMod.
I no longer have this issue with after a clean BML upgrade
I did not wipe i simply copied the Full version over installed from ZIP and it booted. I did have none stop FC with SWYPE but i uninstalled then reinstalled without any further complications.
It does still say i'm Base Version: S:D700.0.5S.EI22. Are we suppose to install the modem ourselves?
LordFuzzy024 said:
I did not wipe i simply copied the Full version over installed from ZIP and it booted. I did have none stop FC with SWYPE but i uninstalled then reinstalled without any further complications.
It does still say i'm Base Version: S:D700.0.5S.EI22. Are we suppose to install the modem ourselves?
Click to expand...
Click to collapse
Yes, get the "modem_delta_EI22_to_EL30.zip" from here:
http://forum.xda-developers.com/showthread.php?t=1457981
-- and flash it with CWM.
Yamuu said:
Yes, get the "modem_delta_EI22_to_EL30.zip" from here:
http://forum.xda-developers.com/showthread.php?t=1457981
-- and flash it with CWM.
Click to expand...
Click to collapse
I've downloaded it twice and tried install from zip twice. I get a Failed Status 7.
UPDATE: Still can't install the Modem and now the ROM tweaks out anytime someone calls me. Nandroiding back to previous rom until EL30 is more stable.
you on BML or MTD. Pretty sure for that modem delta update to work you need to be on BML.
LordFuzzy024 said:
I've downloaded it twice and tried install from zip twice. I get a Failed Status 7.
Click to expand...
Click to collapse
Before installing this ROM, where you on BML or MTD?
If MTD, you can try these steps:
Download and install (through CWM): ShadowKernel-EL30-MTD-v3.0+OC/UV
http://forum.xda-developers.com/showthread.php?p=21830188
Download CWM-bml-sdcard-5.0.2.7-epic4g.zip:
http://epiccm.blogspot.com/2012/01/boot-cwm5-bml-from-sdcard-no-flash.html
Flash that, re-boot to the temporary recovery, then install the modem upgrade.
Well, I'm on MTD/Yaffs2 and my first attempt at flashing this resulted in boot loops at the ani screen. After wiping and reflashing 1.1.02a then flashing this over that without wiping, it worked without a hitch. ;-)
..:: superlite-5.1 ::..
Works on AT&T or Rogers
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[LEFT][SIZE=3][SIZE=5][B] ..:: features ::..[/B][/SIZE][/SIZE]
[SIZE=3][SIZE=4][B] 5.1[/B][/SIZE][/SIZE] Notes
[SIZE=3][SIZE=4]• 5.1 is a roll up of 5.0+ Patches1-3[/SIZE][/SIZE] (a little less bloat) [COLOR=Lime][B](FULL WIPE)[/B][/COLOR] if you dont want to upgrade uses the 5.0 patches1-3
[SIZE=3][SIZE=4]• Removed SocialHub[/SIZE][/SIZE] & [SIZE=3][SIZE=4]ShareApp[/SIZE][/SIZE] (sorry kids who like socialhub, stay with 5.0 if you want social hub)
[SIZE=3][SIZE=4]• Removed [/SIZE][/SIZE][SIZE=3][SIZE=4]Widget_ProgramMonitor(it was broken since twiz was gone)[/SIZE][/SIZE]
[SIZE=3][SIZE=4]• Removed Samsung Email, MMS, and [/SIZE][/SIZE][SIZE=3][SIZE=4]TouchWizCalendar[/SIZE][/SIZE]
[SIZE=3][SIZE=4]• Added gMail like email client with exchange support.[/SIZE][/SIZE] It functions just like the new gmail app, but supports personal email boxes.
[SIZE=3][SIZE=4]• Added ICS MMS and ICS Calendar[/SIZE][/SIZE]
[SIZE=3][SIZE=4]• I cant put ICS browser in, the ATT browser does something at first boot to enable LTE.[/SIZE][/SIZE]
[SIZE=3][SIZE=4] [B]5.0[/B][/SIZE][/SIZE] Notes
[SIZE=3][SIZE=4] • [B]Tested by 20+ Beta testers [/B][/SIZE][/SIZE]
[SIZE=3][SIZE=4] Apex Launcher[/SIZE][/SIZE]
[SIZE=3][SIZE=4] • Debloated Android ICS 4.0.3 from UCALC4 ODIN Leak[/SIZE][/SIZE]
[SIZE=3][SIZE=4] • UCALC4 ATT modem[/SIZE][/SIZE]
[SIZE=3][SIZE=4] • Stock Kernel 3.0.8 unsecured --[SIZE=2]thx romracer[/SIZE][/SIZE][/SIZE]
[SIZE=3][SIZE=4] • NO CIQ & Deodexed & ZipAligned[/SIZE][/SIZE]
[SIZE=3][SIZE=4] • Black Background home/lock screen.[/SIZE][/SIZE]
[SIZE=3][SIZE=4] • AT&T Logo Removed (top left)[/SIZE][/SIZE]
[SIZE=3][SIZE=4] • Updated Apps: Gmail, Play Store, ASOP Calculator[/SIZE][/SIZE]
[SIZE=3][SIZE=4] • Stock Gallery/Email/Exchange/Calendar/Social hub/Music Player + Titanium Backup [/SIZE][/SIZE]
[SIZE=3][SIZE=4] • 14 Toggle Mod --[SIZE=2]thx romracer[/SIZE][/SIZE][/SIZE]
[SIZE=3][SIZE=4] • No Ads (Host File)[/SIZE][/SIZE]
[SIZE=3][SIZE=4] • Free Internet Tethering Support *Verified[/SIZE][/SIZE]
[SIZE=3][SIZE=4] • Superuser/ Rooted & BusyBox installed[/SIZE][/SIZE]
[SIZE=3][SIZE=4] • /etc/init.d support[/SIZE][/SIZE]
[SIZE=3][SIZE=4] • Custom Boot Animations, replace /system/media/bootanimation.zip with your own[/SIZE][/SIZE]
[SIZE=3][SIZE=4] • Fixed Keyboard Dictionary[/SIZE][/SIZE]
[SIZE=3][SIZE=4] • Fixed Delete SMS thread FC issue[/SIZE][/SIZE]
[SIZE=3][SIZE=4] • Fixed Gallery to allow setting lockscreen background[/SIZE][/SIZE]
[SIZE=3][SIZE=4] • Removed Adobe Flash & Reader, Rom Manager. [/SIZE][/SIZE]
[SIZE=3][SIZE=4][SIZE=2] *Download from market if you want these[/SIZE][/SIZE][/SIZE][/LEFT]
..:: install guide ::..
Download superlite-5.1.zip
Reboot to Recovery
Wipe Data/Factory Reset
Under Advanced "Wipe Dalvic Cache"
Under "Mounts and Storage" Select "Format /System"
Install superlite-5.1.zip from sdcard or internal sdcard
Rom is full wipe
Trouble After Flashing? see FAQ
..:: CWR Patches for 5.1 ONLY ::..
AOSP Browser Replacement Patch (replaced ATT/samsung browser with AOSP)
Old MMS.APK from 5.0 Patch (switches back to old MMS.apk non AOSP)
**only flash if you have trouble with sending or receiving MMS
**After Flashing goto settings >> apps >> find mms >> clear data >> reboot
..:: CWR Patches for 5.0 ONLY ::..
superlite-5.0 PATCH#1 (optional) fixes 3rd Party forced closed with Kindle APP & Widget Locker APP
(flash in CWR, none wiping, just updates fonts folder) (posted 4/9/12)
superlite-5.0 PATCH#2 (optional) replaces stock broswer & MMS with AOSP versions
(flash in CWR, none wiping, just updates system/app files) (posted 4/9/12) -thx edgex
superlite-5.0 PATCH#3 (optional) REMOVES social hub, stock samsung email client, stock samsung calander. Replaces it with gmail like email client+exchange+AOSP calendar
(flash in CWR, none wiping, just updates system/app files) (posted 4/9/12) -thx edgex
Patch3 Notes: Needs Wipe Data/Cache & Wipe Dalvic Cache
..:: Bugs/Common Issues ::..
Google Contact SYNC doesnt not add contacts to your google contacts account.
..:: FAQ ::..
Common ICS leak bug: shutdown/Reboot "stick"
Fixes: try whatever you want
1. Pull battery after first boot
2. Superwipe before installing my superlite
3. After install take a nandriod backup and reload that backup.
3. Last Resort fix. Backup your Internal SDCARD data which is the /emmc to your computer via usb cable, boot to CWR, format /emmc, superwipe and reflash superlite. Again this is a last resort, and will delete all of your data. MAKE SURE YOU HAVE AN EXTERNAL SDCARD TO FLASH FROM.
Launcher bug Messenger shortcut "activity cannot be launched"
Fix:
Recreate the MMS shortcut!
No LTE at first boot
Fix:
Pull battery after first boot (or move to a LTE service area j/k)
My clock isnt set right to the right time
Fix:
Call your voicemail or call your cell# from a land line, time is updated over the air from your network provider
An APP Force closed after loading backups.
**Common if you load backups. #1 or #2 should fix it quick
Fixes:
1. Reboot to CWR >> Fix Permissions
2. Settings >> APPS>> Clear App data >> Uninstall app, Reinstall APP from market
3. Reinstall Superlite, dont load your apps data, just load the apps.
4. Dont load backups, just reinstall all your apps by hand from market.
Android Bug, Lock screen doesn't engage when screen times out.
Fix:
Settings >> security >> screen lock >> enable pin security >> now change Lock Automatically to Immediately after sleep >> Change screen lock back to swipe to unlock
ROGERS Caller ID doesnt work
Call Rogers, ask to disable "Name Display" on your account.
My modem/radio didnt flash or says UNKNOWN under settings. Or you need the install the modem
Flash the Stock Leak ICS RADIO (UCLAC4)
I need SUPERWIPE, where can I get it?
Download Superwipe
Just click THANKS or Donate to me if you like my ROM.
First! never thought i would say that.. thanks alot! looks good dwnloading now
Stock ICS Theme
See more details here: http://forum.xda-developers.com/showthread.php?t=1568128
Thanks phoenix6 for taking the time to edit my rom source.
Going to make a Nandroid and then try this out on my Rogers phone coming from your Gingerbread superlite ROM. I'll let you know how it goes.
Waiting for a full charge and will flash this.
You other one borked on me earlier data went out on me had to flash the modem again to get data back. That was the only issue I had with your other rom.
Will let you know how this one goes.
Did you get a fix on the shut down and reboot ?
any chance for a nonwipe version? full wypss mak ma brane hurrt! ive done sooo many this week trying out ics
oh ya and that 15 toggle ics themed mod is pretty cool have you played around with it?
remf4i said:
Did you get a fix on the shut down and reboot ?
Click to expand...
Click to collapse
No I didnt do anything for it. Its random. Its some sort of first boot up cache/db.
If you have this trouble pulling the battery after first boot fixes it.
Does this come with romracers kernel already in there or do I need to flash it separate? I ask because I see a separate link for it
Sent from my SAMSUNG-SGH-I727 using xda premium
Kagenui said:
Going to make a Nandroid and then try this out on my Rogers phone coming from your Gingerbread superlite ROM. I'll let you know how it goes.
Click to expand...
Click to collapse
Let us know how it goes. I am also on Rogers and have been holding back on ICS thus far but the itch is getting intense
mhx said:
No I didnt do anything for it. Its random. Its some sort of first boot up cache/db.
If you have this trouble pulling the battery after first boot fixes it.
Click to expand...
Click to collapse
This rom did not fix it and it still exists for me after a battery pull.
Sent from my SAMSUNG-SGH-I727 using xda premium
** EDIT: Used Darkside wipe, reflashed, and now shutdown/restart is working properly! Thanks mhx.
mhx said:
No I didnt do anything for it. Its random. Its some sort of first boot up cache/db.
If you have this trouble pulling the battery after first boot fixes it.
Click to expand...
Click to collapse
Thanks for the hard work getting this to boot
Is darksides wipe cool to do with this and follow up with dalvik cache wipes?
veebomb said:
Let us know how it goes. I am also on Rogers and have been holding back on ICS thus far but the itch is getting intense
Click to expand...
Click to collapse
I followed the instructions perfectly but got a boot-loop. I pulled the battery. Going to see if i can still boot into clockworkmod
Edit: Yes i can. Restoring backups now.
sparker366 said:
Is darksides wipe cool to do with this and follow up with dalvik cache wipes?
Click to expand...
Click to collapse
I never hurts to do a full wipe
Kagenui said:
I followed the instructions perfectly but got a boot-loop. I pulled the battery. Going to see if i can still boot into clockworkmod
Edit: Yes i can. Restoring backups now.
Click to expand...
Click to collapse
Repeat the installation instructions 3 * it should work
Installed over 'Working Rogers ICS' ROM, and it worked fine, home button still doesn't work, but screen lock and receiving calls work, so that's two steps forward. I then decided to go for broke and installed 15 toggle, ICS camera, romracer kernel, and agps fix. Something in there broke it, since I lost the background and notification area, I imagine it's the 15 toggle, so I am reflashing the ROM right now. My fault, I know, too ambitious.
Update: reflashed, home button works! Now I just need 15 toggle ICS theme to work, and I'll be running a perfect ROM for me.
everything is awesome except my market keeps FC-ing. any advice, should i just install another ics market over it?
I just keep getting boot loops. Installed it 3 times as per the instructions.
Update: Ok its booting now. i had to do a Dark super wipe. Then i followed the instructions and now its loading. Will report back if i see any other errors.
mhx said:
Repeat the installation instructions 3 * it should work
Click to expand...
Click to collapse
I'll try again and see what happens.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Come into the light & see what LeeDrOiD can do for you!!
All carriers supported
My stuff, has been kicking around longer than your stuff... be it hacks, mods, tweaks or ideas, I don't complain that it's spread wider than a porn stars legs. we are all open source developers with the ability to share and get along, it's common courtesy to ask and give a thanks, don't just take and hope for the best!
Some of you know me, some of you don't... (A quick Google search will give a lot away)
My Name: Lee Bailey (AKA LeeDrOiD)
My Hobby: Android Rom & Kernel Development
One of the first ever Android HTC Sense ROM Developers (If not the first), I started with the HTC Hero & have been developing ever since!
@MrHofs - LeeDrOiD Graphics Designer & Themer
@~clumsy~ - Kernels, Code & LeeDrOiD.co.uk
@The Great Dane - A dear friend, tester, long term supporter & all around awesome guy
@exocetdj - Tester & Team entertainer
@Scabes24 - Themer (When he decides to do some graft)
@baadnewz - Old friend & collaborator
@SoLdieR9312 - SVN & Nightlies
@leefear - Hosting
My Wife - For putting up with me & XDA
@Lyapota | @OMJ | @A5J4DX l @snq- l @scar45 | @damo | @Team RC | @m-deejay |@ klquicksall | @rmk40 | @SteelH | @j4n87 | @daniels7 | @PG101 | @Irvysan | @ShowP-1984 | @broncogr | @lyapota | @mwilky | @patensas | @SvaDev | @Captain_Throwback | @Lord ClockaN | Team Cyanogen | Android Ice Cold Project
LeeDrOiD Accepts no responsibility for:
Any damage to your device
Any loss of data
Lack or loss of sleep - Due to but not solely caused by ROM flashing addictions
The end of the world
Or your granny's Alzheimer's (It's a disease, it had nothing to do with me)
All of my builds are tested personally & by a number of close friends, I only develop for devices I own & use
The OLD ROM
. ROM - Based On: HTC Europe 3.35.401.12 Official base
Android 6.0
HTC Sense 8 with Freestyle themes!
Rooted with the latest SuperSU thanks to @Chainfire (OPTIONAL)
De-odexed & Zip-aligned
init.d & su.d support
Disable error reporting
Cleaned up bloat
BusyBox installed
SQlite3 support, Bash and Nano shell support
External SD write permissions
Removed HTC logging & analytics junk
Package Signature Checking Disabled
Clear cache at boot time
Lots of configuration changes and speed enhancements
Improved battery vs. Stock builds
Created and added Android Logo font pack (S electable in settings)
Enabled blinking LED whilst charging
Enabled flashlight shortcut in power menu
Enabled auto selfie feature
Enabled voice activated capture
Multi user support
Enhanced AppOps
Ambient display / Doze Support
Advanced Power Menu - Reboot, Recovery, Bootloader & Safe Mode
China Sense recent apps with RAM display and kill all button (Optional)
Home shortcut menu (enable and hit menu in Prism)
Improved battery stats
SystemUI Tuner - long press settings icon in pull down to enable
LeeDrOiD custom build trickery
LeeDrOiD Boot animation, audio & wallpapers .
Custom LeeDrOiD Locales & Language support . And lots more........
Supported Languages:
English, Czech, German, Espanol, French, Italian, Dutch, Polish, Russian, Norwegian, Korean, Greek, Turkish, Swedish, Danish, Portuguese, Finnish, Thai, Korean, Vietnamese, Chinese, Japanese, Portuguese, Croatian & More
Aroma
Clumsy Kernel
Optional exchange mail admin hack
Optional stock boot animation and audio
Remove HTC App's . Remove HTC Widget's
Remove Google & misc apps
Default Tweaks toggles
HTC Sense 8 . HTC 10 camera
Sense 8 touchPal keyboard
LeeDrOiD Tweaks
UI Tweaks
Sense Launcher Landscape Support
Infinite Apps in Folders
Allow All Rotations
Enable APM (Advanced Power Menu)
China Sense Recent App Style (Includes a RAM usage monitor & kill-all button)
China Sense (Launcher without an app-drawer, alternative Telephone & Messages UI)
Toggle App Circle Side Bar
App Circle Side Bar position & size
Choose App Circle Side Bar Apps
StatusBar
Right Corner Quick - Quick settings pull down
Traffic Indicator (Up-stream & down-stream data speed)
Traffic Indicator Colour
MIUI Battery MOD
Disable NFC Notification
Disable USB Debugging Notification
Disable Power Saving Notification
Disable Android Sync Notification
Disable MTP Notification
Hide BoomSound Notification
Disable Heads Up Notification
Blink LED on notification while charging
QS pull down battery % display
QS Brightness slider toggle
Pull down user switcher
Hide StatusBar Clock
Centre Clock
AM/PM Clock styles
Hide Battery Icon
Buttons
Enable/Disable Navigation Bar
Navigation Bar Size
Re-map recent apps key
Long press volume media controls / ambient pulse
Long press back button to kill foreground app
Double Tap Status Bar to put the device into sleep
Control keyboard cursor with volume keys
Enable persistent nav bar menu button
Hide IME Switcher button
Enable flash-light on long press power button
Power
HTC Power Manager Toggle (pnpmgr)
Haptic feedback duration
Brightness Twilight Mode
Ambient Display Settings toggle
Ambient Display on significant motion
Vibrate & ambient on significant motion
Ambient display duration
Ambient display brightness
Ambient display delay time
Ambient display fade intime
Ambient display fade out time
Networks
Large Caller Contact Picture
Hide Photo Mask for low-res pictures
4G / LTE Notification Switch
Auto Record Incoming / Outgoing Calls
Disable SMS to MMS Converstion
Toggle Fast Dormancy
Misc
Security Tweaks
Lock QS Pulldown when device locked
Lock long press power when device locked
Force 100% Jpeg quality in HTC 10 Camera
Launch HTC Gallery + Editor or Google Photos from Camera
Launch Hidden Marshmallow Land Game
Toggle Boot Audio
Default USB Mode (ADB/ADB MTP)
Enhanced MM Permissions (More granular perms with a timer)
Default app install location
Advanced
Fix Permissions
ZipAlign apks
Mount System RW / RO
Trim Partitions
Wipe Cache
Wipe Dalvik-cache
Known Issues
None - you tell me!
Please make sure you have the latest HTC Hima 3.35.XXX.XX Marshmallow firmware installed prior to installing this ROM
The OLD ROM base is 3.35.401.12
If you are on Sprint or T-Mobile US, use the latest carrier specific MM Firmware package
A full wipe is not necessary, although always recommended to avoid issues
First boot will take approximately 10 minutes due to Art optimization
(If your device gets warm during ART optimization, don't panic, the M9's super sleek alloy body is like 1 big heatsink)
A quick whistle stop tour of flashing a custom build
Unlock your device boot loader via > HTC Dev
Flash the latest TWRP recovery image
Insure you have the correct firmware version
Nandroid backup your entire stock system or previous build
Reboot your device and copy the LeeDrOiD rom. zip to your internal memory
Reboot to recovery (Power off > Hold Vol down & power > reboot to bootloader > reboot to recovery
Select the install option and locate the LeeDrOiD rom zip on your sdcard
Follow the Aroma installer & be patient
OLD ROM - LeeDrOiD One M9 V8.3.0 - STABLE - September 15th (2016!!!)
Fix Verizon boot issues
Remove traces of SuperSU from Tmobile-US & Sprint boot.img's
Fix init.d support and enable default adb for Sptint, Verizon & Tmobile-US
Other misc carrier fix-ups
Aroma: Install SuperSU or run UN-Rooted
SuperSU 2.78 - Systemless
Add Aroma options for stock Android LockScreen & Twilight Mode
Backup and restore of init.d scripts
Art optimizations - faster boot time after wipe / dalvik wipe
Enable locking of QS Pulldown when device is locked
Enable locking of long press power when device locked
Removed delay and dialog when rebooting to recovery
Removed delay in power button long press
LeeDrOiD Tweaks V9.0.2
- Too many changes to list
Fix SystemUI Tuner FC
Patched and updates HTC Sense Home 8.14.781908
Add App Circle Side Bar! - Ported from CM/OMNI (Configurable in Tweaks)
Add Long press volumes down for flashlight (toggle in tweaks)
Add Signal strength indicators in QS pull down (toggle in tweaks)
Fix auto record incoming & outgoing calls
Remove Facebook, Twitter, Photos & DropBox to reduce ROM zip size & fix install issues
Update all inbuilt applications
NEW ROM - port from LeeDrOiD_10 rom for HTC ONE M9 based on NOUGAT - DOWNLOAD LINK
Downloads, Live change log's, SVN guide & nightly builds all available at LeeDrOiD.co.uk
Using SVN & keeping up with the latest ROM changes, just got a whole lot easier!!
Grab the all new SVN Nightly Zipper from www.LeeDrOiD.co.uk
With just a few clicks, you will have the latest updates as they land & no more downloading full ROM zips!
Enjoy & welcome to the world of LeeDrOiD
Foot Notes (In the footer of course)
A few things to note regarding the un-rooted option:
1. If you dirty flash selecting Un-Rooted, all traces of SuperSU will be removed, this will allow Magisk or an alternative root method to be installed.
2. Please complete 1 full boot before installing Magisk.
3. Users can run un-rooted if they wish, I can confirm that Android Pay and Pokemon Go both work after installing the ROM un-rooted.
4. All tweaks options requiring root access will be removed from tweaks if running un-rooted, 90% of these options can be configured in Aroma so you are only missing out on Kernel settings, as init.d is backed up and restored when flashing, your previous configurations will be retained, so you can flash with root, set up then re-flash un-rooted
XDA:DevDB Information
LeeDrOiD One M9, ROM for the HTC One (M9)
Contributors
LeeDroid, The Great Dane, Golv
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 3.35.401.12/4.28.401.3
Based On: Sense 7 / 8
Version Information
Status: Stable
Current Stable Version: V4.0.0 rev.78
Stable Release Date: 2017-11-07
Created 2015-03-31
Last Updated 2017-11-17
Reserved
F A Q
Q 1: After I flash your ROM and reboot my device, my device keeps rebooting/bootloop?
A: Make sure you flash the correct firmware
Q 2: Should I use a task killer on the LeeDroid ROM?
Not recommended, is you really want to, use the one that came with the rom.
Q 3: Backup? What is that?
A good idea is to back up all your data and settings from the phone before flashing a new rom with a full wipe. Best app available is Titanium Back up
The best way to back up the contacts is to sync it via HTC Sync or via your gmail.
Q 4: Are Nandroid and Titanium backup the same thing? How do I manage backups?
No, Nandroid backs up the ROM and Titanium backs up the applications. Nandroid is what you do using the recovery and it makes the exact image of your ROM along with the data.
Q 5: On what occasion will I lose my data (apps, contacts etc)?
Only when you flash the rom wiping data using the Aroma installer option. When you just flash a rom or a .zip from recovery, it will not wipe anything unless otherwise mentioned.
Q 6: I was on stock (or another rom from another cook) and I flashed LeeDroid rom, now I am having some problems.
1. Try to rebooting the Phone and see if it makes a difference.
2. Reboot into recovery and clear cache and dalvik, reboot the phone and clear data of the apps causing problem.
3. Reboot into recovery, reflash the rom choosing full wipe in the installer.
Q 7: How do I flash Full wipe and what does it erase?Reboot into recovery, install a zip from sd card option, select the rom, follow the Aroma installer and select "Flash with wiping all (or something to that effect*)
Q 8: The screen is not very responsive and is lagging.
Let the phone settle down a bit after you unlock it. It generally needs a few seconds to kick up the CPU.*
Q 9: The market is not installing anything. Gives error.
Reboot into recovery and select “clear cache partition”. And under settings - applications - Manage applications - under the Market app < Clear Data>.
Q 10: My battery is draining heavily.
When you first flash a ROM this is what happens. Give it atleast one full charge cycle and it should come back to normal. If required, reboot into recovery and clear battery stats. It is advisable to do so on 100%.
Common Opinion - Heavy battery drain is one thing that you cannot complain about on this rom, for sure. The battery life is much above average*
It's NOT recommended to empty the battery, it may course a poorer battery performance and life cyclus.*
Q11: Should I run the phone battery to zero percent, and what if it does??
A: Absolutely not! Both the current recoveries are giving problems while pulling the battery up from zero percent. If the phones dies off due to battery being zero, try to reboot it into recovery, flash the stock recovery. If it doesnt, then plug it into the wall charger and leave it for as long as it takes for you to boot it. Then flash the stock recovery, charge it fully and do your stuff.
Q12: MMS Problem?
A: Please check your APN settings.*
Q13: Some games that use the motion/G sensor are not working as they should.
A: Re-Calibrate your Gsensor –> Settings – Display – Gsensor Callibration
Q14: I dont like the animations. Dont want them.
A: Go to settings - display - animations.*
Q15: How do I change the bootanimation or the downanimation?
A: System\Customize\Resource or System/Data/Local. Replace the boot/down animation.zip file with the one you want. The new file must be named bootanimation.zip/downanimation.zip.
Mine
Way to go Lee!!!
I will up a stock rooted odex build in the next few days along with an option to flash back to stock, probably an RUU or ARUWizard + rom.zip combo.
Could you please make clear if I can somehow flash this on my O2 Device.
I'm on 1.32.206.15.
Or do I first have so get supercid or s-off?
DroidShift79 said:
Could you please make clear if I can somehow flash this on my O2 Device.
Click to expand...
Click to collapse
Hi
Check the install path mentioned just above the download links, HTC Dev unlock your device, flash TWRP, backup & flash the rom zip.
Providing the install path matches, O2 UK will work without issue
No supercid nor s-off needed?
That rom reads so nice. I'm downloading. [emoji4]
DroidShift79 said:
No supercid nor s-off needed?
Click to expand...
Click to collapse
No supercid or S-Off is required, simply the latest HTC update... remember to backup your current install
Added to the OP
A quick whistle stop tour of flashing a custom build
Unlock your device boot loader via HTC Dev > http://www.htcdev.com
Flash the latest TWRP recovery as posted by @Captain_Throwback > TWRP For the HTC One M9
Nandroid backup
Go to the Advanced TWRP section and select file manager
Navigate to "/dev/block/platform/f9824900.sdhci" > if this path exists you are good to go!!
Reboot your device and copy the LeeDrOiD rom. zip to your internal memory
Reboot to recovery (Power off > Hold Vol down & power > reboot to bootloader > reboot to recovery
Select the install option and locate the LeeDrOiD rom zip on your sdcard
Follow the Aroma installer & be patient
LeeDroid said:
Navigate to "/dev/block/platform/f9824900.sdhci" > if this path exists you are good to go!!
Click to expand...
Click to collapse
Did /dev/block/bootdevice/by-name not work for you? It's the default path.
Captain_Throwback said:
Did /dev/block/bootdevice/by-name not work for you? It's the default path.
Click to expand...
Click to collapse
It didn't want to play & wasn't visible so I went with the direct mount, mimicking the m8 install bud, from the feedback i have had it seems generic, flashed 2 devices numerous times with test builds and all is well ?
Uploading the guts of an RUU as we speak, ARUWizard from the M8 along with an official signed 1.32.401.8 as a fallback, once again tested numerous times
Good to see first ROMs poppin' up!
hm.. installation error in aroma log
Code:
installing busybox
creating symlinks
setting permissions
set_metadata_recursive: some changes failed
installer status: 1
whats that, any idea how to fix?
k1moe said:
hm.. installation error in aroma log
Code:
installing busybox
creating symlinks
setting permissions
set_metadata_recursive: some changes failed
installer status: 1
whats that, any idea how to fix?
Click to expand...
Click to collapse
Very strange indeed, which version of twrp are you using? And did you check the MD5?
I installed this build twice to 2 different devices prior to upload.
About to go to sleep so check the md5 , if it matches, full wipe & try again, if it fails, restore your backup & I will take a look tomorrow evening..
Love how quick backup and restore is in this beast.
Edit: I am running a slightly modified version of twrp, link below but as always, use at your own risk. Team win and all affiliates will not be held responsible ?
https://www.dropbox.com/s/2c0doa2mxulbr1r/twrp-2.8.6.0-hima-LEE.img?dl=0
LeeDroid said:
About to go to sleep so check the md5 , if it matches, full wipe & try again, if it fails, restore your backup & I will take a look tomorrow evening..
Click to expand...
Click to collapse
Get some rest, you deserve it
Firstly: thanks for the efforts.
And do we really need the latest ota update to flash this? As soon as I got my hands on the phone I immediately flashed TWRP, so I'm in a bit of a predicament right now as I can't update via OTA right now...
@LeeDroid
Here you go. 95J866217F9292610
You deserve much more.
KratosAurion said:
Firstly: thanks for the efforts.
And do we really need the latest ota update to flash this? As soon as I got my hands on the phone I immediately flashed TWRP, so I'm in a bit of a predicament right now as I can't update via OTA right now...
Click to expand...
Click to collapse
I would say YES you need latest OTA before flashing this rom. Lee mentioned it for a reason so I would follow the instructions. Why don't you just restore stock and grab the OTA just to be on the safe side ?
LeeDroid said:
Very strange indeed, which version of twrp are you using? And did you check the MD5?
I installed this build twice to 2 different devices prior to upload.
About to go to sleep so check the md5 , if it matches, full wipe & try again, if it fails, restore your backup & I will take a look tomorrow evening..
Love how quick backup and restore is in this beast.
Edit: I am running a slightly modified version of twrp, link below but as always, use at your own risk. Team win and all affiliates will not be held responsible
https://www.dropbox.com/s/2c0doa2mxulbr1r/twrp-2.8.6.0-hima-LEE.img?dl=0
Click to expand...
Click to collapse
latest twrp and md5 looks correct. but..
yeah man... return of the droid with your version of twrp it works. thank you so much for your help :highfive:
k1moe said:
latest twrp and md5 looks correct. but..
yeah man... return of the droid with your version of twrp it works. thank you so much for your help :highfive:
Click to expand...
Click to collapse
Glad to hear it worked out for you [emoji106]