I am in a bad situation with my rooted, now semi-bricked G1 =[
I had cyanogenmod and RA recov. I installed a new theme directly from the CM updater app; then on reboot, my phone would not boot into the OS (stuck on logo, before loading screen). So I tried to overwrite the phone with cyan again. It wouldn't work so then I was left to flash the phone and start over. Upon flashing, I got that b#$6h of an error. Then the "RUUNBH".
Now upon turning on my phone (In any way) it comes to the colured screen. When I try to flash a nbh, I get the "not allow" because my SD card needs to be a gold card.
The only method now is to gold card my SD. Which I cannot figure out anymore because all the methods I would need a WinMo phone or an working Android phone, neither I have access to.
In short, does anyone know how I can get a SD card's CID without a phone. I DO have a laptop with a sd card reader and CAN get access to a external USB sd card reader.
Any help?
Blake.AnRKist said:
I am in a bad situation with my rooted, now semi-bricked G1 =[
I had cyanogenmod and RA recov. I installed a new theme directly from the CM updater app; then on reboot, my phone would not boot into the OS (stuck on logo, before loading screen). So I tried to overwrite the phone with cyan again. It wouldn't work so then I was left to flash the phone and start over. Upon flashing, I got that b#$6h of an error. Then the "RUUNBH".
Now upon turning on my phone (In any way) it comes to the colured screen. When I try to flash a nbh, I get the "not allow" because my SD card needs to be a gold card.
The only method now is to gold card my SD. Which I cannot figure out anymore because all the methods I would need a WinMo phone or an working Android phone, neither I have access to.
In short, does anyone know how I can get a SD card's CID without a phone. I DO have a laptop with a sd card reader and CAN get access to a external USB sd card reader.
Any help?
Click to expand...
Click to collapse
Buy a cheap winmo phone? Something that has whats required. There has to be an old one that can do it for like 20 - 30 dollars. I don't think it's possible otherwise.
I think it may be possible to get the CID with a sdcard slot (not USB), usually within a laptop. Recently, I found this: jo0ls-dotnet-stuff.blogspot.com/search/label/SD%20Card%20CID
I used his source and threw in a couple lines to debug why it wasn't working, but it seems the laptop I own doesn't have a support SD card slot, so I will have to go see someone who has a internal SD slot on their laptop.
A winmo phone for $30?... By any chance of pointing me in the direction of such item(s)? (I am Australian)
SuperCID
Though this thread is for the Topaz, IMO pt 5.1 and especially pt 5.2 are interesting for you;
http://forum.xda-developers.com/showthread.php?t=530335
Success,
Senax
Senax said:
Though this thread is for the Topaz, IMO pt 5.1 and especially pt 5.2 are interesting for you;
http://forum.xda-developers.com/showthread.php?t=530335
Success,
Senax
Click to expand...
Click to collapse
Thanks for your suggestion. But it is possible that you would still need to get her a CID. I am wondering if it is possible to overwrite the whole SD card through the tool that is used to edit your SD card and into a 'goldcard'.
I PMed the person who was recommended in that thread, fingers crossed.
SD card reader that can read SD/MMC 32 bit CID
Hi There
I think this might be useful to anyone that sits with the problem of reading the 32 bit serial number/CID of a SD/MMC card.
I have managed to get firmware written for the Addonics eSata/USB multi-card reader model AEPDDESU with a small application that will read and display the CID number.
There is no other way to read the CID number through USB on PC other than having the the chip set inside the reader relay the information back to the host when it receives an application defined command,like for instance DeviceIoControl.
If anyone is interested drop me a mail and i will gladly mail u the firmware + utillity .One will need to buy this drive though.
Take Care
switzblade said:
Hi There
I think this might be useful to anyone that sits with the problem of reading the 32 bit serial number/CID of a SD/MMC card.
I have managed to get firmware written for the Addonics eSata/USB multi-card reader model AEPDDESU with a small application that will read and display the CID number.
There is no other way to read the CID number through USB on PC other than having the the chip set inside the reader relay the information back to the host when it receives an application defined command,like for instance DeviceIoControl.
If anyone is interested drop me a mail and i will gladly mail u the firmware + utillity .One will need to buy this drive though.
Take Care
Click to expand...
Click to collapse
Were you successful in creating generic code that works with all card readers?
Hi !
I've just visited this forum. Happy to get acquainted with you. Thanks.
droidzone said:
Were you successful in creating generic code that works with all card readers?
Click to expand...
Click to collapse
Dear friend.
I am looking for solution to read Serial No from SD card. I made special software which is runing on every pc on out company an check all inserted USB memory keys. Then compare serial no with database and if not registered is used we get warnings on IT section that not registered usb key was used.
Unfortunatelly i have problem with sd cards because i always get serial number of card reader and not serial no od SD card.
Is there some way to get serial no from SD card via Card reader? Can you send me the model of card reader which is possible to read this SN + Software?
Is there some dll or component for reading usable for .net visual basic?
Thank you for informations.
Marek
SEE IF THIS APP CAN HELP
GoldCard Helper
BY Günther Starnberger
which can fdownload from market
sd tester
there's sd tester sd122 by u-reach, which displays cid info...sold on amazon
I applaud you!!!
wordsleft said:
SEE IF THIS APP CAN HELP
GoldCard Helper
BY Günther Starnberger
which can fdownload from market
Click to expand...
Click to collapse
You are my savior!!! Thank you SOOO much for this! I have spent several hours trying to find something for the PC, but they all crash or just don't work. Cheers!!
DONE
wordsleft said:
SEE IF THIS APP CAN HELP
GoldCard Helper
BY Günther Starnberger
which can fdownload from market
Click to expand...
Click to collapse
Thanks a lot dude, i tried so manythings in PC with a card reader, nothing worked, but htis worked for me, thanks again, :good:
Write or modified Cid of sd card ?
Translated with google translation
Hello you know how to modify the cid of a card sd ??
thank you in advance
Hi, I've been trawling through the XDA archives and found noting that can directly help me so;
What I'm trying to do is move some [not all] apps to my SD card. My phone is GT540 running 2.1.
Ideally I would prefer to move the apps to the card on the device without rooting [I am able to root though] but as far as I know that's not possible, so I found Links2SD on market which has pretty good reviews but requires me to have a second partition on the card.
How would I go about doing this. If anyone has any better way of moving apps please tell, either way thank you in advance.
hey im new and i searched all around but i couldn't find a related post but if i missed it sorry.
ok i bought a new nook a made a bootable sd card for it
now i was wondering if i change it to dual-boot will i lose all the apps i downloaded?
also it took a long time for a single app to download, can i speed that up?
thanks
p.s. i used this website to make a bootable sd card
myraroldan,com/wp/2011/05/nook-color-to-android-table-without-rooting/
I have a Cruz reader and want to hack it to get rid of unwanted apps and perhaps increase it's functionality. I have tried the method to upload a pre-configured ROM update via a zip file but always get the exclamation error. Given the apparent unreliability of that method when starting with the stock reader I am seeking alternatives.
Since the device uses a standard micro SD card for its internal storage I was wondering:
Is there is a way I can remove and save the stock SD card and create a new custom ROM/SD card on my desktop then plug that into the reader.
Any help is appreciated.
I started to post this in Hacking section because I thought a custom ROM constituted a hack but when I checked that I was asking a question the board informed be this is not hacking but a question.
Hi,
I have the 8Gb version of the Galaxy J5 (SM-J500Y) and am experiencing the same problem of low internal memory that everyone else seems to be. I have a 64Gb micro SD but my computer is not recognising an SD card in the built-in SD card reader (nor does it recognise the internal camera but that's a separate issue- since windows 10 upgrade)
After doing a little research, I think I understand that MiniTool Partition Wizard should see the SD card when USB linked if it is first rooted (I could be wrong). Other option is I could go buy a card reader or get the reader working. Tips welcome.
Either way it needs to be rooted before I can use Link2SD. As I understand it, I can root the thing, but only from Android 5.1.x builds. I tried rooting it from Android 6.1 and killed it. Was able to resuscitate it with the Kies App, but can only recover it to the latest Android (6.1)... so I end up at square one: unrooted and not able to root.
How do I get it working in Android 5.1.x so I can root it? How can I partition the SD card (preferably by getting the internal reader working)? And then which is the best ROM to flash? I'm leaning toward the Cyanogenmod 12.1 I found here: http://forum.xda-developers.com/gal...m-cyanogenmod-12-1-samsung-galaxy-j5-t3468830 mostly because it seems stable and lite.
Help please. TIA
Anyone?
Even a little help to get me started would be awesome...