I am in a bad situation with my rooted, now semi-bricked G1 =[
I had cyanogenmod and RA recov. I installed a new theme directly from the CM updater app; then on reboot, my phone would not boot into the OS (stuck on logo, before loading screen). So I tried to overwrite the phone with cyan again. It wouldn't work so then I was left to flash the phone and start over. Upon flashing, I got that b#$6h of an error. Then the "RUUNBH".
Now upon turning on my phone (In any way) it comes to the colured screen. When I try to flash a nbh, I get the "not allow" because my SD card needs to be a gold card.
The only method now is to gold card my SD. Which I cannot figure out anymore because all the methods I would need a WinMo phone or an working Android phone, neither I have access to.
In short, does anyone know how I can get a SD card's CID without a phone. I DO have a laptop with a sd card reader and CAN get access to a external USB sd card reader.
Any help?
Blake.AnRKist said:
I am in a bad situation with my rooted, now semi-bricked G1 =[
I had cyanogenmod and RA recov. I installed a new theme directly from the CM updater app; then on reboot, my phone would not boot into the OS (stuck on logo, before loading screen). So I tried to overwrite the phone with cyan again. It wouldn't work so then I was left to flash the phone and start over. Upon flashing, I got that b#$6h of an error. Then the "RUUNBH".
Now upon turning on my phone (In any way) it comes to the colured screen. When I try to flash a nbh, I get the "not allow" because my SD card needs to be a gold card.
The only method now is to gold card my SD. Which I cannot figure out anymore because all the methods I would need a WinMo phone or an working Android phone, neither I have access to.
In short, does anyone know how I can get a SD card's CID without a phone. I DO have a laptop with a sd card reader and CAN get access to a external USB sd card reader.
Any help?
Click to expand...
Click to collapse
Buy a cheap winmo phone? Something that has whats required. There has to be an old one that can do it for like 20 - 30 dollars. I don't think it's possible otherwise.
I think it may be possible to get the CID with a sdcard slot (not USB), usually within a laptop. Recently, I found this: jo0ls-dotnet-stuff.blogspot.com/search/label/SD%20Card%20CID
I used his source and threw in a couple lines to debug why it wasn't working, but it seems the laptop I own doesn't have a support SD card slot, so I will have to go see someone who has a internal SD slot on their laptop.
A winmo phone for $30?... By any chance of pointing me in the direction of such item(s)? (I am Australian)
SuperCID
Though this thread is for the Topaz, IMO pt 5.1 and especially pt 5.2 are interesting for you;
http://forum.xda-developers.com/showthread.php?t=530335
Success,
Senax
Senax said:
Though this thread is for the Topaz, IMO pt 5.1 and especially pt 5.2 are interesting for you;
http://forum.xda-developers.com/showthread.php?t=530335
Success,
Senax
Click to expand...
Click to collapse
Thanks for your suggestion. But it is possible that you would still need to get her a CID. I am wondering if it is possible to overwrite the whole SD card through the tool that is used to edit your SD card and into a 'goldcard'.
I PMed the person who was recommended in that thread, fingers crossed.
SD card reader that can read SD/MMC 32 bit CID
Hi There
I think this might be useful to anyone that sits with the problem of reading the 32 bit serial number/CID of a SD/MMC card.
I have managed to get firmware written for the Addonics eSata/USB multi-card reader model AEPDDESU with a small application that will read and display the CID number.
There is no other way to read the CID number through USB on PC other than having the the chip set inside the reader relay the information back to the host when it receives an application defined command,like for instance DeviceIoControl.
If anyone is interested drop me a mail and i will gladly mail u the firmware + utillity .One will need to buy this drive though.
Take Care
switzblade said:
Hi There
I think this might be useful to anyone that sits with the problem of reading the 32 bit serial number/CID of a SD/MMC card.
I have managed to get firmware written for the Addonics eSata/USB multi-card reader model AEPDDESU with a small application that will read and display the CID number.
There is no other way to read the CID number through USB on PC other than having the the chip set inside the reader relay the information back to the host when it receives an application defined command,like for instance DeviceIoControl.
If anyone is interested drop me a mail and i will gladly mail u the firmware + utillity .One will need to buy this drive though.
Take Care
Click to expand...
Click to collapse
Were you successful in creating generic code that works with all card readers?
Hi !
I've just visited this forum. Happy to get acquainted with you. Thanks.
droidzone said:
Were you successful in creating generic code that works with all card readers?
Click to expand...
Click to collapse
Dear friend.
I am looking for solution to read Serial No from SD card. I made special software which is runing on every pc on out company an check all inserted USB memory keys. Then compare serial no with database and if not registered is used we get warnings on IT section that not registered usb key was used.
Unfortunatelly i have problem with sd cards because i always get serial number of card reader and not serial no od SD card.
Is there some way to get serial no from SD card via Card reader? Can you send me the model of card reader which is possible to read this SN + Software?
Is there some dll or component for reading usable for .net visual basic?
Thank you for informations.
Marek
SEE IF THIS APP CAN HELP
GoldCard Helper
BY Günther Starnberger
which can fdownload from market
sd tester
there's sd tester sd122 by u-reach, which displays cid info...sold on amazon
I applaud you!!!
wordsleft said:
SEE IF THIS APP CAN HELP
GoldCard Helper
BY Günther Starnberger
which can fdownload from market
Click to expand...
Click to collapse
You are my savior!!! Thank you SOOO much for this! I have spent several hours trying to find something for the PC, but they all crash or just don't work. Cheers!!
DONE
wordsleft said:
SEE IF THIS APP CAN HELP
GoldCard Helper
BY Günther Starnberger
which can fdownload from market
Click to expand...
Click to collapse
Thanks a lot dude, i tried so manythings in PC with a card reader, nothing worked, but htis worked for me, thanks again, :good:
Write or modified Cid of sd card ?
Translated with google translation
Hello you know how to modify the cid of a card sd ??
thank you in advance
Related
I hope this is the right place ,i have searched and found nothing,i have a 16 GB micro card and i cant format it i have tried directly from my phone ,in a card reader ,with an adapter straight into another computers card reader,please help me , TIA Jacques
If you want to format it because it seems corrupted (and cant do it in any way as you told) then it is broken and you need to change it at service.
I had also my 16G microSD changed
is it a branded card?
exactly WHY cant you format it?... wanna give us some insight into what happens?
I couldn't format a card with a number of programs - In the end I tried 'Flash Format' by CNetX (google it) - it worked first time on the free evaluation version.
Good luck.
More info on formatting sd card
sorry i should of provided more info ,i have tried formatting the card using every option and program i can/have (going to try 'Flash Format' as was recommended.It seems that i either get an io error or when i try and remove some suspicious files/folders i cant because they have charachters in their names it is a panasonic 16 m card ,thanks for all the help , this is a great forum sam jack
hehe.. strange. probably an unbranded sucky card or just a ruined one
About to get the Inspire and get right on with rooting, although I've been reading and not understanding how this goldcard works completely. I guess my concern is the errors some users are getting? Where they need to use another HTC device to get the right cid code or something? I dont have another HTC device, can I actually lock my device out? Please advise as I'll risk rooting only so far. Thanks, maybe I'm just blowing this out of proportion.
if you follow the instructions in the hack kit, you shouldn't have any issues. this was my first experience with creating a gold card and it went smoothly. just be patient and persistent.
I am also about to buy the Inspire. So can we use the bundled SD card for the gold card? or do we have to have a spare card for emergency restore and stuff?
You can use the card it comes with.
Sent from my Desire HD using Tapatalk
Good question as I was going to use a spare one. I might as well use the one it came with. I'm about to begin. whats the worst that can happen?
gunnyman said:
You can use the card it comes with.
Sent from my Desire HD using Tapatalk
Click to expand...
Click to collapse
I will probably keep a spare one around. Would you recommend that?
Thans
metaldood said:
I will probably keep a spare one around. Would you recommend that?
Thans
Click to expand...
Click to collapse
use whatever works. just keep in mind you can't use the goldcard.img file you get from the email on any card other than the one you got the serial number from. I bought a 16 GB card to use with my phone anyway, so I used the 8 GB it came with and put it in a drawer in case I ever need it again.
gunnyman said:
use whatever works. just keep in mind you can't use the goldcard.img file you get from the email on any card other than the one you got the serial number from. I bought a 16 GB card to use with my phone anyway, so I used the 8 GB it came with and put it in a drawer in case I ever need it again.
Click to expand...
Click to collapse
Oh okay. I have 1 8GB with me right now and I will get the one with Inspire. So is 8GB enough for the gold card so that I will keep it for .img file?
I will keep the spare in my phone.
Sorry I am a total noob in this. I come from iPod family
It will work with a 2 GB card minimum from what I read.
what does that mean? i have a 8 gig myself so just process for a goldcard.img? then save then use if needed?
gunnyman said:
use whatever works. just keep in mind you can't use the goldcard.img file you get from the email on any card other than the one you got the serial number from. I bought a 16 GB card to use with my phone anyway, so I used the 8 GB it came with and put it in a drawer in case I ever need it again.
Click to expand...
Click to collapse
Sorry to Bump this up,.
but i got a HTC Desire,.since 2010,
made a goldcard back then (4g microsdhc )
rooted ,.used several diffrent roms,. but im getting Low on space issues,..
so i bought this 16gb micro SDHC ,Backed up my rom., and now i want to put my backed up rom on this new 16GB card,.and use that for permanent,.
do i need to make a goldcard from this 16gb as well ? and if yes ,.how >? i cant boot with it because my rom is not on there,.i tried partitioning it in CWM recovery. and mounted the SD card put my clockworkmod on the SD card with the Backup,...
Restored,..but it stops and says cant mount sd ext.,...
then i tried mounting the SD card and start the Goldcard tool and tried making a Goldcard of it,.and tried the Restore again,...didnt work as well,..
now my problem got bigger,..as the 16gb card cant be mounted anymore,.or used in any other device ,like my wifes Tablet,..
any one can help me out on this ,
thanks in advance ,.
Mike130784 said:
Sorry to Bump this up,.
but i got a HTC Desire,.since 2010,
made a goldcard back then (4g microsdhc )
rooted ,.used several diffrent roms,. but im getting Low on space issues,..
so i bought this 16gb micro SDHC ,Backed up my rom., and now i want to put my backed up rom on this new 16GB card,.and use that for permanent,.
do i need to make a goldcard from this 16gb as well ? and if yes ,.how >? i cant boot with it because my rom is not on there,.i tried partitioning it in CWM recovery. and mounted the SD card put my clockworkmod on the SD card with the Backup,...
Restored,..but it stops and says cant mount sd ext.,...
then i tried mounting the SD card and start the Goldcard tool and tried making a Goldcard of it,.and tried the Restore again,...didnt work as well,..
now my problem got bigger,..as the 16gb card cant be mounted anymore,.or used in any other device ,like my wifes Tablet,..
any one can help me out on this ,
thanks in advance ,.
Click to expand...
Click to collapse
The goldcard was only necessary to get past the very first stage of rooting. A goldcard is used to force the device into accepting a ROM that was not designed for the particular device (in the case of Inspire, you must install a DesireHD ROM to be able to continue with the rooting process).
Once you're rooted, the rooting process sets SuperCID in hardware so a gold card is no longer needed, even if you want to install a ROM not designated for your device.
In short, use your 16GB card just as you normally would (maybe save the 4G in case you ever need to root a different device).
Thank you for your fast reply.,
i understand the idea behind the goldcard beter now,.
so i was trying to root my phone and the image didnt copy over n now its at the little recovery image thing witht the triangle and exclamation point
EDIT: So im back to normal and i see damaged SD Card is that possibley what went wrong?
I think a little more info is needed. Did you make a proper gold card? What process did you used and so on.
Ok, so i used the auto gold card maker up until patching it, then i used the HXD thing and copied and pasted the gold card to 000 to 170 and saved but everytime i put in the card it keeps saying damaged SD card but i safely removed it from windows idk what im doing wrong
the hex editor only works with only certain sd cards. Give me a sec and I will link you to the one I used to patch the gold card img to my Scan disc.
Edit: here it is, all you need to do is patch the gold card.img on to the sd card with it.http://android.modaco.com/content/software/308798/pc-application-goldcardtool/
mudknot2005 said:
the hex editor only works with only certain sd cards. Give me a sec and I will link you to the one I used to patch the gold card img to my Scan disc.
Click to expand...
Click to collapse
does it matter that its an sdhc?
You should be able to patch the image with the gold card maker I posted above.
Edit: to test it, all you do is use it as a removable drive if you can access it then it worked. If it asks you to format it then it didn't work, and you need to do it again.
mudknot2005 said:
You should be able to patch the image with the gold card maker I posted above.
Edit: to test it, all you do is use it as a removable drive if you can access it then it worked. If it asks you to format it then it didn't work, and you need to do it again.
Click to expand...
Click to collapse
no luck gives me an error message and a Different CID
Then your going to have to try a different Micro SD some honestly just don't work. I went through three two scan disks and a patriot. If your able to get a kingston or pny class four 2gb those are confirmed to work.
Edit: Make sure you have the right mmc (2) and that it has been reversed, then remake the gold card image and try again.
mudknot2005 said:
If your able to get a kingston or pny class four 2gb those are confirmed to work.
Click to expand...
Click to collapse
That upsets me because i lost one of those and was going to use it earlier but couldnt find it
I don't know if all the stock sd cards are the same, but I was able to use the 8gb sd card that came with my phone to make my gold card.
It took me about 10 tries to make it with the stock 8gb.
I ended up trying a Lexar 8gb class 6 and it worked on the first try no problem. This was after the stock Samsung SD card that came with my inspire gave me hell.
Sent from my Desire HD using XDA App
so after trying for the past day i figured out what was wrong, when i used the hex editor i would click on the GOLDCARD instead of the Removable disk, got it to work rooting as i type
Hi,
Hoping someone can help, although from what I've found online it seems as tho I'm SOL. I have a 16GB card that I was using on a focus. I'm not gonna use the focus and wanted to keep the card, format it and I don't care about erasing the content- just as long as I can reuse it.
Is this possible at all or has anyone found a workaround way of doing this? I would hate to just toss the card out pretty much if it's worthless.
Thanks in advance for any help...
Use a Nokia Symbian Phone with micro Sd Slot to Format it.
First after insert the card ignore the message of Crypted Card or so.
Then go to the options menu and format the card. After This u can use ist in any device
ElNinio80 said:
Use a Nokia Symbian Phone with micro Sd Slot to Format it.
First after insert the card ignore the message of Crypted Card or so.
Then go to the options menu and format the card. After This u can use ist in any device
Click to expand...
Click to collapse
nice thanks...I'll try to find a way to get my hands on one. Any other methods in case I can't get a symbian one?
I've used my girlfriend Olympus camera and my Nikon camera to format my card (Centon 16GB) on a few occasions. But I have to trick the card to get it to be detected in the cameras. If I just put the card in the camera normally it doesn't detect it, but when I do the following steps it always works.
1. Hard reset (format) my phone using the 3 hardware buttons without the card in it.
2. Turn the phone off and install the sd card.
3. Hard reset (format) a 2nd time using the 3 hardware buttons, but with the card still in.
4. Turn the phone off and take out the card. Do not reboot, you must turn the phone off after the 2nd hard reset.
5. Insert the card into a camera and try a format.
Not sure why, but if I reboot after hard resetting, my camera's cannot detect or format the card. Its possible that the encryption isn't written until you reboot after a card is formatted.
TriAxisFL said:
I've used my girlfriend Olympus camera and my Nikon camera to format my card (Centon 16GB) on a few occasions. But I have to trick the card to get it to be detected in the cameras. If I just put the card in the camera normally it doesn't detect it, but when I do the following steps it always works.
1. Hard reset (format) my phone using the 3 hardware buttons without the card in it.
2. Turn the phone off and install the sd card.
3. Hard reset (format) a 2nd time using the 3 hardware buttons, but with the card still in.
4. Turn the phone off and take out the card. Do not reboot, you must turn the phone off after the 2nd hard reset.
5. Insert the card into a camera and try a format.
Not sure why, but if I reboot after hard resetting, my camera's cannot detect or format the card. Its possible that the encryption isn't written until you reboot after a card is formatted.
Click to expand...
Click to collapse
This seems ... really extreme. I hope in the future Microsoft releases some sort of service tool (like the one for the NoDo update) that will allow recognition and format of cards on Windows.
abenitez64 said:
Hi,
Hoping someone can help, although from what I've found online it seems as tho I'm SOL. I have a 16GB card that I was using on a focus. I'm not gonna use the focus and wanted to keep the card, format it and I don't care about erasing the content- just as long as I can reuse it.
Is this possible at all or has anyone found a workaround way of doing this? I would hate to just toss the card out pretty much if it's worthless.
Thanks in advance for any help...
Click to expand...
Click to collapse
Its easy m8...very easy
If you dont have one, get a 5$ card reader and use this tool to format the card in your pc
http://www.partitionwizard.com/free-partition-manager.html.
colossus_r said:
Its easy m8...very easy
If you dont have one, get a 5$ card reader and use this tool to format the card in your pc
http://www.partitionwizard.com/free-partition-manager.html.
Click to expand...
Click to collapse
and you've tried this on a real windows phone 7 device not the hd2 convert? there is a huge diff
If you can find a Mac with a card reader, then you can clear out the partition with the Mac Disk Utility.
You can use pretty much anything - I tried it on Windows Mobile (HTC formating SD card utility - worked fine), Android (SGS with FroYo - had to press Format twice - worked fine), desktop WIndows and SD card in card reader - with using diskpart (list disk, select disk X, select partition 1, delete, select partition 1, delete, create partition blabla - worked fine too)
Haven't tried Linux box
OndraSter said:
You can use pretty much anything - I tried it on Windows Mobile (HTC formating SD card utility - worked fine), Android (SGS with FroYo - had to press Format twice - worked fine), desktop WIndows and SD card in card reader - with using diskpart (list disk, select disk X, select partition 1, delete, select partition 1, delete, create partition blabla - worked fine too)
Haven't tried Linux box
Click to expand...
Click to collapse
You have an HD2, if you have an official WP7 device the card is set up very different. So far the only way known to "normalize" the SD card is to use a Nokia phone or odd tricks with random cameras.
voluptuary said:
You have an HD2, if you have an official WP7 device the card is set up very different. So far the only way known to "normalize" the SD card is to use a Nokia phone or odd tricks with random cameras.
Click to expand...
Click to collapse
I think this is not true.
domineus said:
and you've tried this on a real windows phone 7 device not the hd2 convert? there is a huge diff
Click to expand...
Click to collapse
Hello M8...
HD2 runs wp7 and the formating and partition of the sd card its the same with any wp7 device...
Its working ... i change my first sd a 4gb card that i had installed wp7 with another bigger one (8gb).
The tools that i have post, can delete any wp7 partion
You can even copy partition to a usb hard disk for backup before you delete it.
And for this to be resolved:
1. Can you please get the minitool partition wizard and try to delete that partition and see whats happen ????
2. Please report back your findings ??
colossus
colossus_r said:
I think this is not true.
Click to expand...
Click to collapse
Try to google/read FAQ/forums before posting. It's 100% true.
http://forum.xda-developers.com/showthread.php?p=12179672#post12179672
colossus_r said:
I think this is not true.
Hello M8...
HD2 runs wp7 and the formating and partition of the sd card its the same with any wp7 device...
Its working ... i change my first sd a 4gb card that i had installed wp7 with another bigger one (8gb).
The tools that i have post, can delete any wp7 partion
You can even copy partition to a usb hard disk for backup before you delete it.
And for this to be resolved:
1. Can you please get the minitool partition wizard and try to delete that partition and see whats happen ????
2. Please report back your findings ??
colossus
Click to expand...
Click to collapse
partition is NOT the same. For hd2 converts running windows phone 7, 200 mb partition of the hd is partitioned to be recognized by windows, therefore making any low level formatting utility work to regain the initial amount of memory as if it was new. BUT for real wp7 devices, the partition scheme is different and cannot be recognized by any computer. Making the partition tool completely and utterly useless...
For non converts (HD2 devices) the only way is to use a nokia device. Otherwise you will be SOL
sensboston said:
Try to google/read FAQ/forums before posting. It's 100% true.
http://forum.xda-developers.com/showthread.php?p=12179672#post12179672
Click to expand...
Click to collapse
Sensboston ... You are right .... I stand corrected.
Sinse as i already said i have an HD2 running WP7 i was under the impression that is the same.
No its not....Its different on the HD2 format for wp7..
And seems that the Nokia solution its the one that works for now...
Now because of this i found the time to learn more about wp7 sd cards.
If any one wants to read more here is a good start with more links
http://lifeinthefastlaneok.wordpress.com/
Thanks again
colossus
colossus_r said:
If any one wants to read more here is a good start with more links
http://lifeinthefastlaneok.wordpress.com/
Click to expand...
Click to collapse
Good catch; probably, mods should copypaste that article to WP7 FAQ to prevent future speculations about this topic.
Back on this ...
Seems that SD Formatter 3.0 has the abillity to format WP7 Cards ????
This member here says that he did it with the that app.
Can anyone confirm this ????
colossus_r said:
Back on this ...
Seems that SD Formatter 3.0 has the abillity to format WP7 Cards ????
This member here says that he did it with the that app.
Can anyone confirm this ????
Click to expand...
Click to collapse
I have a 16GB Kingston MicroSD that was paired with my first Samsung Focus. I've tried all the apps listed here with multiple computers, external card readers, etc, and nothing will unlock the card so far.
spokanedj said:
I have a 16GB Kingston MicroSD that was paired with my first Samsung Focus. I've tried all the apps listed here with multiple computers, external card readers, etc, and nothing will unlock the card so far.
Click to expand...
Click to collapse
I was able to reformat a 32gb card that I used on my HD7 using one of the Nokia Express Music phones. Forgot the exact model. It will ask for a password but you can always hit cancel and then go through the formatting
hey guys,
1 month ago i've buyed a new sd card(16 gigs, class4) it works pretty good until now.
now i can't erase anything, when i try it the datas seemd to be away, but on the next plug they're there again...
and the phone doesn't recognize the card either, so what i can do?!
Corrupted. Use minitools to do a full wipe and try.
doesn't work anyway,
or explain what i have to do exactly
Have you tried it on a different device to make sure the problem is the sd card and not your phone. Tried backing up and formatting the sd card?
on different devices it's like read/only...
formatting doesn't work,
Assuming the sd card is MicroSD ( it is isn't it?), and you've tried formatting it on a phone as well as from a computer, always making sure the lock of the microSD adapter was off, the only thing i would think of, is trying with different formatting tools software, there are plenty of them on the internet.
A program that might work:http://en.kioskea.net/download/download-127-hp-usb-disk-storage-format-tool
yes it's micro sd but it hasn't any lock,
when i try that program there's written: the device is write-protected..
When you plug your micro sd card to the computer you do it with an adaptor in wich you should find a lock, if it's off or doesn't exist the following tutorial should help.
http://www.troublefixers.com/remove-write-protection-on-usb-pen-drive-or-memory-card-or-ipod/
Remember google!
doesnt work...
what type of format does it have? did you formatted it at first use? with which kind of format ? i'm running out of possible solutions.. argh!
it has 1 gig ext, and the other's fat32..
Repartitioning, trying with the disk utility on ubuntu...or if your on time, or return it to the store and change it for a new one... i've no idea what so ever apart from what i've already answered. Sorry mate. May be someone around the forum can help you further...
cannot partitioning it, read only,...
when someone knows how to fix that he would answer..