Rooting of Xolo a700 is not so hard
Here is the Simple method of Rooting
First Enable USB Debugging From Setting>Development
Install Drivers in PC with PDanet Download Here
Follow The instructions given by PDAnet
When Drivers installed Exit PDAnet from System Tray
Now Download & Extract The Root Toolkit From Here -
Now connect Device Make sure USB debbuging is ON
Don't Select USB storage Etc.
Now open the Extracted folder of root toolkit
Run the Runme.bat file
Cmd Open,Select what you want Root or Unroot
And let it DONE
Press the restore button Whan it shows on your phone
When the cmd show the process is complete
Disconnect your device from PC
Now check your phone is Rooted or Not
If the phone is Rooted A supersu named app is in your phone
Related
Hi, guys! I saw a really wonderful post by MrTasselhof for rooting your tablet easily. You may see it from herehttp://www.slatedroid.com/topic/34442-root-window-n90-dual-core-ii-how-to-root/
Or I repeat the post here:
I used Moborobo and superoneclick to root my n90, http://www.moborobo.com/ give a go.
I can confirm that this method works for rooting the device.
The instructions are VERY simple.
1) Link: Download Moborobo
2) Download this modified SuperOneClick - Short Fuse
3) Install Moborobo and open it
4) Make sure USB Debugging is enabled on your tablet (Settings --> Developer Options)
5) Connect your Window N90 Dual Core tablet to your PC
6) Wait for Moborobo to see the device
7) Extract the contents of SuperOneClick
8) Run SuperOneClick.exe
9) Click on Root
10) Click on Yes (it says device is already rooted do you wish to continue)
That's it... you are all done and ROOTED!
Root the Byond B66
-------Notes--------
1. This does void your warranty.
2. The root image auto installs the superusers permission app
3. I am in no way responsible for anything that goes wrong.
4. Thanks to Bin4ry and for the drivers.
Downloads:
1. USB driver for MT6577
2. USB VCOM driver for MT6577
3. Root_with_restore_Bin4ry_v15.7z
copy paste the link for drivers
ge.tt/7xA9h3a?c
Procedure:
1. Enable USB debugging on your device. To do that, go to Settings > Development > USB debugging.
2. Connect your phone to pc via usb cable, install the USB driver for MT6577. If windows installs the driver automatically, choose update drivers from device manager and install the proper downloaded usb drivers.
3. Now switch off the phone , remove the battery and with device manager open on screen, connect phone to pc via usb cable holding the volume+ button. In device manager you will see MT65xx preloader, choose update driver and install the USB VCOM drivers. Once the drivers are installed, disconnect, put the battery back and on the phone.
4. Enable USB debugging on your phone. To do that, go to Settings > Development > USB debugging.
Connect your phone to PC
Unzip the root tool you downloaded above.
Change the mode of your device from USB Storage to Media Device and proceed further. This change can be done only when you have connected your device to the PC, so don't go mad searching for this option before you have even connected your device. (Thanks RajivMishra13 for the update).
Run the runme.bat file. (Clever naming, eh?)
Click the Runme.bat file
A command prompt with weird green letters will pop-up on your screen.
Follow the onscreen instructions carefully. To start off, you willl need to type in a "1" and press enter.
Note: If you ever want to Unroot your B66, follow the above steps till you reach this one and then, instead of typing "1", type "x" and hit enter. Follow the instructions that appear on the command prompt after that.
The command prompt window with weird green letters: Root by Bin4ry tool
Your device will reboot during the process after which Bin4ry will copy some files to your device.
When the green letters in the command prompt says Have Fun!, then... Have fun.
That means, your device is rooted now and you can enjoy Superuser permissions!
I found this article on another site, I take no credit :angel:
How to root your Dapeng A75
1. Download driver for Windows, just this MT6573ADBdrivers.zip from http://chinamobiles.org/downloads/zap/MT6573ADBdrivers.zip
Unzip and connect the phone on to the computer via USB. You will be prompted to install the new hardware wizard, and specify the directory where you unzipped the driver. (If you are not prompted right click "my computer" and click manage, then click device manager (on the left) and right click MTK65.... (with yellow triangle next to it) and update driver software, browse my computer and then select where you unzipped the drivers)
2. Download TPSparkyRoot_ haipai _noble_I9220.zip from http://mediafire.com/?wvb2v914y0uddtj and unzip.
3. On your phone, enable USB Debugging and Unknown Sources. Start TPSparkyRoot.bat. In the command prompt (on your PC) you will see the progress of root. If you successfull connected the Dapeng A75 via USB to your computer and you have installed the drivers for Windows follow the on screen instructions (In the command prompt).
Root has 3 steps, where each single step the phone is restarted. Root program waits until you press any key to confirm that the phone has restarted.. After the third restart (which turns off root program on the PC) you can test that root was successful by installing Root Checker from the playstore, this will test if your phone is rooted or not.
Note:Root your phone installs these files : busybox, File_Expert_4.1.8.apk, GooglePlayStore3.5.19.apk, Su, Superuser.apk, vending-5.3.16-mod.apk
If you root failed, repeat steps 3 and 4
Posted by Smoula Mrzout
Original post : http://facebook.com/permalink.php?id=212300702165465&story_fbid=343114809131898
NOTE : I have tried this on my own dapeng A75 and it worked flawlessly
NOTE 2 : If for some reason this breaks your phone (It shouldn't but I'm just saying), I take NO responsibility !
Alternative links (direct download) :
Drivers : http://wiimancool1mc.no-ip.org\MT6573ADBdrivers.zip
Rooting software : http://wiimancool1mc.no-ip.org\TPSparkyRoot.zip
Happy rooting !!!
this tutorial, is for repairing the huawei g750-u10 in case you flashed the wrong recovery and now you're stuck in a bootloop.
First of all you will need (it's all in the link to download, make shure you have a sdcard on your phone before starting):
-Adb install setup
-Adb toolkit
-vcom drivers
mega.co.nz/#!gURHXDoZ!QNmv7LaK8r4WIQBGaUyoNho3TPX0YZp9jwHaEHgDmII
note:the recovery.img provided on the rar file only works for the U10, the method might work for other models but with a diferent recovery file.
-Installation of the phone mediatek drivers:
-Start with installing th vcom drivers i provided on the rar file, type HDWWIZ on the windows search tab:
Install the hardware manually>Ports(com&lpt)>Have a disk>select the file wich corresponds to you windows>mediatekpreloader usb vcom port> restart your computer. (if this method doesn't work for you try to search for vcom driver installation tutorials)
-Installing adb
-double click on the adb-setup.exe file provided and install it including drivers.
-the adb tool kit doesn't need installation just run the Adb toolkit Gui
on adb toolkit, type the command fastboot continue as shown in the picture
s13.postimg.org/yuauaawpj/Untitled.jpg
Remove the battery from your mobile phone, wait 5s plug it in again. Connect the usb to the computer and pluh it to your phone and at the same time push the power button till it turns on but keep your finger in the VOLUME DOWN all the time, it may reboot 2 times but then you will get the fastboot/repair mode image you can now lift your finger.
When you are in fastboot connected to your computer (the mediatek drivers will install wait for installation to complete).
Now return to the Adb GUI and press the execute command, (it will appear 3 lines starting with something saying error dont mind that it's normal) and wait a few seconds then your phone will restart it self and boot normally.
You're allmost there:
-When your phone boots, select the usb connection to usb mass storage device.
-copy the recovery.img provided to the root of your sdcard, safely unplug the phone from your pc.
-download and install the mobile mtk uncle tools app from the playstore.
-turn off wifi and mobile data, start the app and give it root permission.
-press the recovery update, select the chinese character file that you copied to your sd before and proceed, VERY IMPORTANT when it asks if you want to reboot into recovery select NO.
- get out off the app and restart your device normally, it's all done you have your phone back.
this is my first tutorial on xda, hope it is easy to follow and i'm thankfull for any suggestions to improve it.
Not rebooting automatically after fastboot continue command
sevenr33 said:
this tutorial, is for repairing the huawei g750-u10 in case you flashed the wrong recovery and now you're stuck in a bootloop.
First of all you will need (it's all in the link to download, make shure you have a sdcard on your phone before starting):
-Adb install setup
-Adb toolkit
-vcom drivers
mega.co.nz/#!gURHXDoZ!QNmv7LaK8r4WIQBGaUyoNho3TPX0YZp9jwHaEHgDmII
note:the recovery.img provided on the rar file only works for the U10, the method might work for other models but with a diferent recovery file.
-Installation of the phone mediatek drivers:
-Start with installing th vcom drivers i provided on the rar file, type HDWWIZ on the windows search tab:
Install the hardware manually>Ports(com&lpt)>Have a disk>select the file wich corresponds to you windows>mediatekpreloader usb vcom port> restart your computer. (if this method doesn't work for you try to search for vcom driver installation tutorials)
-Installing adb
-double click on the adb-setup.exe file provided and install it including drivers.
-the adb tool kit doesn't need installation just run the Adb toolkit Gui
on adb toolkit, type the command fastboot continue as shown in the picture
s13.postimg.org/yuauaawpj/Untitled.jpg
Remove the battery from your mobile phone, wait 5s plug it in again. Connect the usb to the computer and pluh it to your phone and at the same time push the power button till it turns on but keep your finger in the VOLUME DOWN all the time, it may reboot 2 times but then you will get the fastboot/repair mode image you can now lift your finger.
When you are in fastboot connected to your computer (the mediatek drivers will install wait for installation to complete).
Now return to the Adb GUI and press the execute command, (it will appear 3 lines starting with something saying error dont mind that it's normal) and wait a few seconds then your phone will restart it self and boot normally.
You're allmost there:
-When your phone boots, select the usb connection to usb mass storage device.
-copy the recovery.img provided to the root of your sdcard, safely unplug the phone from your pc.
-download and install the mobile mtk uncle tools app from the playstore.
-turn off wifi and mobile data, start the app and give it root permission.
-press the recovery update, select the chinese character file that you copied to your sd before and proceed, VERY IMPORTANT when it asks if you want to reboot into recovery select NO.
- get out off the app and restart your device normally, it's all done you have your phone back.
this is my first tutorial on xda, hope it is easy to follow and i'm thankfull for any suggestions to improve it.
Click to expand...
Click to collapse
Hi, I've followed the instructions you gave and now I'm stucked at the part which it wouldn't reboot by itself after i typed the "fastboot command".
1) Before I've had chance to charge my phone, it ran out of battery and fastboot mode does not charge the phone. I've also tried to flash the recovery image in fastboot mode, but i got Err:0x2017, what is this error about?
2) And the GUI should run in location bin files as my fastboot driver, not the 0KB fastboot in default location.
2) Do all these steps require unlocking bootloader? I don't think I've unlocked, all I did was just root the phone.
Help
Hi
I have a rooted Huawei Ascend Mate but I installed the wrong TWRP recovery a few days ago. My phone keeps booting and I can't use my recovery, because it is a touch version but it doesn't respond to my touch. So, I don't know if I can flash my stock rom or another recovery...
Can I use this tutorial to fix my phone or can you please make one for the Huawei Ascend Mate?
kind regards
I have tried kingroot and almost all root apk and pc method but it shows fail error. Please help me to root it.
I have same panasonic p77 and rooted it many times use kingo root.exe for pc and connect phone via usb by allowing .
1. Start your pc kingoroot.
2.connect your phone in on mode.no need to switch it off.
3.allow usb debugging through develover option.
4.click on root on pc and wait.
5.congrats!rooted successfully.