Hi Guys,
I had flashed my friends i9003 with RRv1.0 ROM and then x-Gamerz and it went crazy! While flashing the xgamerz rom it went into and infinite loop where it kept restarting to recovery mode. Then i flashed XXKPM stock using ODIN and it worked. It functioned for few weeks but then few days back while installing Instagram it got switched off. Since then i am not able to turn it on. When i switch it on it comes to the samsung logo screen and just keeps playing the boot animation!
I tried reflashing the XXKPE & xXXKPM and XXKPQ using Odin but nothing is working. It is not turning on, just keeps showing the boot animation.
Please help out:crying:... I would really appreciate it.
i think format MicroSD with SDformater
After full KPE > LF2 > CF-LF2 > Wipe full + format system and emmc > CM10A4 and let my know
https://www.sdcard.org/downloads/formatter_3/
Flash first clean for mandatory starting
On CM10 Alpha 3 and all other basic Froyo, Gingerbread, ICS, JB
- drivers samsung.rar - 5.58 MB
- Open Odin 1.85 only !!!
- KPE FULL (do not forget the PIT) (Froyo only ! no forget bootloader)
reset odin then remove cable and battery after samsung logo
- LF2 (PDA only with Odin)
reset odin then remove cable and battery after second samsung logo
- CF Root LF2 (PDA only with Odin)
reset odin then remove cable and battery after samsung logo
- Wipe data/factory reset
- Mounts and Storage > Format /System
- X-Gamerz in recovery (remove battery after flach kernel if bootlop recovery)
- X-Gamerz in recovery
- Wip Cache and Dalvik Cache
Hi LoLaTiOn, thanks for the suggestion, i tried it step by step but after :
Mounts and Storage > Format /System
I can't install any other ROM as when i try to do : "choose zip from sdcard" it say's "No Files found"!
It seems it is unable to read the SDCARD anymore. what to do??
EDIT: p.s. the SD Card is fine, it is working on other phones.
Related
can anybody tell me how to flash remics rom from starting?
Custom ROM installation
karanmirchandani96 said:
can anybody tell me how to flash remics rom from starting?
Click to expand...
Click to collapse
Check on the steps mentioned by Chinmay in the development section - they are pretty straight forward, else just google up!
http://forum.xda-developers.com/showthread.php?t=1844062
-First you need to root your cell by flashing cf-root for your firmware
http://forum.xda-developers.com/showthread.php?t=1331253
-then download the latest RemICS ROM and put in the roots of memory card
-put your phone in recovery mode by pressing the "volume down + HOME + power"
-once cell goes in recovery mode Do a factory reset/data wipe
-then select “install zip from sd card” > “choose zip from sd card” and then choose RemICS ROM
-after flashing this rom "wipe cache,wipe dalvik cache (by going in advance)" from recovery
-then select reboot system now
I see you are a newbie, i'll help you.
You first need to flash XXKPE, from XXKPE you need to flash DDLF2, and when DDLF2 is flashed, you need to flash CF-ROOT for DDLF2.
Let the phone boot and go to CWM icon, press it and wait till it loads, press Reboot to CWM recovery (something like that) and when it is rebooted wipe data factory reset, wipe cache, wipe dalvik cache and install the Remics Rom and reboot and thats it.
If u want to flash ADDONS just reboot recovery and flash ADDONS no need to wipe anything.
Good luck.
where is external sd card folder in remics rom?
Ditbardh said:
I see you are a newbie, i'll help you.
You first need to flash XXKPE, from XXKPE you need to flash DDLF2, and when DDLF2 is flashed, you need to flash CF-ROOT for DDLF2.
Let the phone boot and go to CWM icon, press it and wait till it loads, press Reboot to CWM recovery (something like that) and when it is rebooted wipe data factory reset, wipe cache, wipe dalvik cache and install the Remics Rom and reboot and thats it.
If u want to flash ADDONS just reboot recovery and flash ADDONS no need to wipe anything.
Good luck.
Click to expand...
Click to collapse
I've seen and tried to follow the steps in your post in the dev forums, but I lack the XXKPE step! Lol. I have RemICS 1.7 now on DXKP7, but I'm experiencing problems with battery drain, so I want to switch to DDLF2. I'll just outline the steps that you have already mentioned so I can be sure:
1. Flash XXKPE, download from here (post by kkrraazzyy).
2. Flash DDLF2 (don't know how to,but you can download from the same link in step 1)
3. Flash CF-ROOT ([please insert forum link here for download and instructions])
4. Let the phone boot
5. Reboot to recovery
6. Perform factory reset
7. Wipe cache and Dalvic cache
8. Install RemICS ROM
Sorry, noob here. Many thanks!
display
my display is draining 44% battery please suggest me some display settings
To all noobs above, all your questions are already answered millions of times, do a simple search and you will find the answers.
went to update from M.o.M. 1.3 to 1.4
Reboot to recovery > wipe data > wipe cache > wipe dalvik >battery pull
odin to 2.3.6 with OPTION C > cleared samsung screen > asked to input password....
- after 3 attempts, it said another attempt would result in the SD card being trashed...
DAFUQ DO I DO?
im assuming it was a bad DL/flash...
i dont effin' know...
anyways...
used the ODIN 100% stock + 3e , then got into stock blue recovery!!
- Reinstalled Packages
- Flashed Community Kernel-v8
phone has now booted and IS WORKING!
:: UPDATE ::
i let the stock cook for about 5 minutes before powering off, then booting into the RED recovery.
-- got into red-recovery, flashed MoM 1.4 just fine
...EVERYTHING WORKS!
/StressRelief
Hi Team,
I had used KIES to upgrade to DDLF2.
Then used CF-Root and was successful in rooting.
Was impressed in Avatar ROM and wanted to try it.
As mentioned in the thread i followed the steps:
1) Took a NANDROID backup using CWM Tools
2) Copied the backup to my computer
3) Downloaded the Avatar ZIP to my SD Card
4) Opened the phone in Recovery mode
5) Did Wipe Data/Factory reset
6) Did Wipe cache partition
7) Flashed the Avatar ZIP file
But it is when i when it struck me that I have forgotten to include the Gapps package. But couldn't do anything as phone didn't reboot properly.
So i was stuck in the recovery screen. So thought of doing a restore of Stock ROM.
1) Did Wipe Data/Factory reset
2) Did Wipe cache partition
3) Did Restore from the nandroid backup
It is where the failure happened. I got some error (yesterday night).
Now my phone doesn't load after the BOOT Image and it doesn't open in recovery mode.
But phone loads in DOWNLOAD mode. So I tried connecting the phone to computer and opening in ODIN.
But now my phone is not detected in the ODIN.
I have downloaded the DDLF2 stock ROM from the thread. I am using Odin 1.85.
Could some one help me please.
Thanks for all your support.
pradeeprajr said:
Hi Team,
I had used KIES to upgrade to DDLF2.
Then used CF-Root and was successful in rooting.
Was impressed in Avatar ROM and wanted to try it.
As mentioned in the thread i followed the steps:
1) Took a NANDROID backup using CWM Tools
2) Copied the backup to my computer
3) Downloaded the Avatar ZIP to my SD Card
4) Opened the phone in Recovery mode
5) Did Wipe Data/Factory reset
6) Did Wipe cache partition
7) Flashed the Avatar ZIP file
But it is when i when it struck me that I have forgotten to include the Gapps package. But couldn't do anything as phone didn't reboot properly.
So i was stuck in the recovery screen. So thought of doing a restore of Stock ROM.
1) Did Wipe Data/Factory reset
2) Did Wipe cache partition
3) Did Restore from the nandroid backup
It is where the failure happened. I got some error (yesterday night).
Now my phone doesn't load after the BOOT Image and it doesn't open in recovery mode.
But phone loads in DOWNLOAD mode. So I tried connecting the phone to computer and opening in ODIN.
But now my phone is not detected in the ODIN.
I have downloaded the DDLF2 stock ROM from the thread. I am using Odin 1.85.
Could some one help me please.
Thanks for all your support.
Click to expand...
Click to collapse
try to reinstall samsung drivers.. or use other usb cable. hope can help you
dreampillow said:
try to reinstall samsung drivers.. or use other usb cable. hope can help you
Click to expand...
Click to collapse
Thanks friend. Followed ur instructions. After installing the samsung drivers, my phone is detected in Odin.
I have downloaded "I9003DDLF2_I9003ODDLF2_INU.zip" from "[ROM] STOCK ROMS for GALAXY SL I9003 {NOW GINGERBREAD 2.3.6}".
I referred the thread "[i9003][ROM] i9003 XXKPH (Gingerbread 2.3.4) Feedback", and found the instructions
Flash procedure:
- Flashed clean XXKPE. Factory reset and flashed KPH as PDA.
- Flashed the Battery_Fix KPE CWM and rooted using SOC 1.9.1. That version seems to work flawlessly everytime. (Its advisable to flash a XXKPH CWM and root without all the PDA hopping.)
- Flashed the normalboot.img from KPH.
- Deodexed using xUltimate 2.8
- Restored user apps with TB.
- Flashed amit's XXKPE CWM (No longer available. Use Skin's "CWM only" for XXKPH from his thread.)
Could you suggest me what has to be done now?
Hello !
I have this phone since yesterday and I have a problem.
I want to install X-Gamerz v2.6 Rom. I have done the KPE clean part, but after I flash CF Root LF2, I don't know what to do. I have reboot the phone in recovery with volume up+home+power button, I wipe data and I selected the .zip (CM10 A4) from SDCARD to flash. It starting to flash and after 3 seconds , it start to reboot. After another 3-4 seconds it says something which look like trying to flash something in recovery, but it stop very fast and it reboots again. After 3-4 seconds it says same thing, and reboots again and again . I tried to take out the sdcard, but after reboot , the recovery says something like "Waiting to mount the SDcard (20sec)" . After 20 sec it reboots again and says same thing.
I tried to follow the steps again, but I`ve got same thing. I tried to use the phone after I flashing CF Root LF2 and it work. But if I trying to flash again CM10 A4 zip or X-Gamerz zip, it enter in bootloop again.
What I doing wrong?
RazvanFCBM said:
Hello !
I have this phone since yesterday and I have a problem.
I want to install X-Gamerz v2.6 Rom. I have done the KPE clean part, but after I flash CF Root LF2, I don't know what to do. I have reboot the phone in recovery with volume up+home+power button, I wipe data and I selected the .zip (CM10 A4) from SDCARD to flash. It starting to flash and after 3 seconds , it start to reboot. After another 3-4 seconds it says something which look like trying to flash something in recovery, but it stop very fast and it reboots again. After 3-4 seconds it says same thing, and reboots again and again . I tried to take out the sdcard, but after reboot , the recovery says something like "Waiting to mount the SDcard (20sec)" . After 20 sec it reboots again and says same thing.
I tried to follow the steps again, but I`ve got same thing. I tried to use the phone after I flashing CF Root LF2 and it work. But if I trying to flash again CM10 A4 zip or X-Gamerz zip, it enter in bootloop again.
What I doing wrong?
Click to expand...
Click to collapse
KPE> LF2> CF-LF2> CM10 A4
- remove the battery (bootlop recovery) this is normal boot loop so need not worry... now start working after this step
- Wipe data factory reset
- Mounts and Storage > Format /System
-Flash x-gamerz...
Thank you. It worked
RazvanFCBM said:
Thank you. It worked
Click to expand...
Click to collapse
np
mustafahussain said:
KPE> LF2> CF-LF2> CM10 A4
- remove the battery (bootlop recovery) this is normal boot loop so need not worry... now start working after this step
- Wipe data factory reset
- Mounts and Storage > Format /System
-Flash x-gamerz...
Click to expand...
Click to collapse
Want to install x-gamerz. Currently on XXKPQ Stock. Can i get detailed instructions to install. Just a noob. Dont know anything about kpe lf2 etc. Flashed XXKPQ with i think odin some time ago though.
Sent from my GT-I9003 using xda app-developers app
RazvanFCBM said:
Thank you. It worked
Click to expand...
Click to collapse
i have the same problem how u got it worked can u explain?
mustafahussain said:
KPE> LF2> CF-LF2> CM10 A4
- remove the battery (bootlop recovery) this is normal boot loop so need not worry... now start working after this step
- Wipe data factory reset
- Mounts and Storage > Format /System
-Flash x-gamerz...
Click to expand...
Click to collapse
I have I9003 stuck on boot rebooting after i tried to flash the root
now I am not able to make it work tried to flash firmware same result ,when I enter the cwm it is not doing the factory reset or wipe data
would you help?
ahmadtrabulsi said:
I have I9003 stuck on boot rebooting after i tried to flash the root
now I am not able to make it work tried to flash firmware same result ,when I enter the cwm it is not doing the factory reset or wipe data
would you help?
Click to expand...
Click to collapse
thank you solved
if someone need the method just let me know
Hello.
Got a Duos 2 to try to revive but no luck so far.
Status:
Power on and stuck at Samsung logo
First time i managed to enter in recovery and did a wipe (data,cache) in the process got a data partition corruption error in red.
Download mode is working, tried to apply a stock firmware via Odin, no errors but still stuck on logo.
After that i can't enter in recovery mode anymore, tried a few custom recoverys applied via odin, but again no recovery mode.
Any ideas?
I only got download mode and no recovery.
affter odin. go to stock recovery wipe facrory reset
Flash the repair frimware to ur device using odin. This will definitely fix the problem.
Download link- https://www.androidfilehost.com/?fid=24499762636002990
Note- repair frimware always comes in Arabic language but you can change the language at the setup screen.
1-install twrp and do clean flash with formating internal storage
2-flash stock you of your region with odin and remember after flashing complete and odin says pass than remove the cable do not remove when it says reset.....
3-if phone stuck's on boot screen than boot your phone into stock rom recovery and wipe cache and delvic
4-reboot it
.done!!!!!!
.
.