Hello,
I found this trick on galaxy note 2 thread, might be necessary for someone
Just go to system/csc and edit the feature.xml or other.xml file by adding these code:
<CscFeature_Sip_EnableSymbolInSecondary>en_US</CscFeature_Sip_EnableSymbolInSecondary>
Click to expand...
Click to collapse
you change the language code with your current language. set to permission rw-r--r-- after editing. then reboot
works on my superbean v1.3.1
not worked in xxlt5 odex
ikromy said:
Hello,
I found this trick on galaxy note 2 thread, might be necessary for someone
Just go to system/csc and edit the feature.xml or other.xml file by adding these code:
you change the language code with your current language. set to permission rw-r--r-- after editing. then reboot
works on my superbean v1.3.1
Click to expand...
Click to collapse
Any idea how to add 3rd row of symbols (3/3- Smileys)? Like how it was in ICS
I have no idea bro,
for emoji you can use emoticons keyboard only, so you can still use samsung keyboard like this:
???????????????
Sent from my GT-N7000 using xda premium
ikromy said:
Hello,
I found this trick on galaxy note 2 thread, might be necessary for someone
Just go to system/csc and edit the feature.xml or other.xml file by adding these code:
you change the language code with your current language. set to permission rw-r--r-- after editing. then reboot
works on my superbean v1.3.1
Click to expand...
Click to collapse
Doesnt work. Rom DXLSE.
devll said:
Doesnt work. Rom DXLSE.
Click to expand...
Click to collapse
use ur rooted phone use x-plore go to system/csc look for features.xml n open wif edit
then add to the bottom n save it then do a reboot ！
for DXLSE u can paste it any where for me i'll paste it from the bottom.
<!-- SIP --> <CscFeature_Sip_EnableSymbolInSecondary> en_GB;en_US;zh_CN;vi;th;id;ms;ko;</CscFeature_Sip_EnableSymbolInSecondary>
alvinhaw said:
use ur rooted phone use x-plore go to system/csc look for features.xml n open wif edit
then add to the bottom n save it then do a reboot ！
for DXLSE u can paste it any where for me i'll paste it from the bottom.
<!-- SIP --> <CscFeature_Sip_EnableSymbolInSecondary> en_GB;en_US;zh_CN;vi;th;id;ms;ko;</CscFeature_Sip_EnableSymbolInSecondary>
Click to expand...
Click to collapse
There isn't any features.xml in my csc folder. As stated in the OP, if there isn't any features.xml, have to edit others.xml. Tried that and it does not work. :laugh:
devll said:
There isn't any features.xml in my csc folder. As stated in the OP, if there isn't any features.xml, have to edit others.xml. Tried that and it does not work. :laugh:
Click to expand...
Click to collapse
try using the code from this thread, working great for me. !
Here
devll said:
There isn't any features.xml in my csc folder. As stated in the OP, if there isn't any features.xml, have to edit others.xml. Tried that and it does not work. :laugh:
Click to expand...
Click to collapse
It won't work on others.xml
But funny things is just work in feature.xml
U can create feature.xml by ur self or find one in the OP
saxmydix said:
try using the code from this thread, working great for me. !
Here
Click to expand...
Click to collapse
Thanks! this way works! :good:
Thanks ikromy works great on my device. I'm on ThaiDai Pristine v4.0
Sent from my GT-N7000 using xda premium
Related
Hey buddy,
I've enabled the Old TV like animation on XXKP9. It was disabled by default, for development purpose i thought.
here's the sample video: http://www.youtube.com/watch?v=76XAZE6iV08
and here's the file:
View attachment framework-res.rar
remember:
-do what you wanna do, i'm not responsible for anything happen because of this file.
-Only for XXKP9
-Root first
-it was tested by me
nice dude
i like it
nurseto said:
Hey buddy,
I've enabled the Old TV like animation on XXKP9. It was disabled by default, for development purpose i thought.
here's the sample video: http://www.youtube.com/watch?v=76XAZE6iV08
and here's the file:
View attachment 644244
remember:
-do what you wanna do, i'm not responsible for anything happen because of this file.
-Only for XXKP9
-Root first
-it was tested by me
Click to expand...
Click to collapse
Can you post the edited file (Source)
because i have already edited the framework file so i cant replace it
i just pull framework-res.apk and extract it,
edit bool.xml in framework-res\res\values\bool.xml
and change value config_animateScreenLights to false
and compile again
that's it bro
nurseto said:
i just pull framework-res.apk and extract it,
edit bool.xml in framework-res\res\values\bool.xml
and change value config_animateScreenLights to false
and compile again
that's it bro
Click to expand...
Click to collapse
I cant find a file like that in framework-res.apk !!!
Cool.
Sent from my GT-I9003 using XDA App
vivekkalady said:
I cant find a file like that in framework-res.apk !!!
Click to expand...
Click to collapse
you must extract it using apk manager
and you will find many files extracted into folder
if you are using XXKP9, then just use my file, i've do it for you bro
nurseto said:
you must extract it using apk manager
and you will find many files extracted into folder
if you are using XXKP9, then just use my file, i've do it for you bro
Click to expand...
Click to collapse
I hav extracted the framework-res.apk file
i can see many files in that
but i cant find the file you have specified
tell me the correct location
i cant use your file because i have ported the overscroll effect to my phone by editing both framework.jar & framework-res.apk
awesome ..great job dude..been waiting for this 4 so long..!
nice work dude
nice work dude,but our framework size around 8mb but this one only 5?wat u did?
vivekkalady said:
I hav extracted the framework-res.apk file
i can see many files in that
but i cant find the file you have specified
tell me the correct location
i cant use your file because i have ported the overscroll effect to my phone by editing both framework.jar & framework-res.apk
Click to expand...
Click to collapse
you are using apk manager aren't you?
when extracting done, in your apk manager folder, you will find a folder named projects. in this projects folder you will find framework-res\res\values\bool.xml
bala242 said:
nice work dude,but our framework size around 8mb but this one only 5?wat u did?
Click to expand...
Click to collapse
yes i noticed that too
don't know why because i only edit one file
maybe apk manager (which compiling files into .apk) is the cause.
nurseto said:
you are using apk manager aren't you?
when extracting done, in your apk manager folder, you will find a folder named projects. in this projects folder you will find framework-res\res\values\bool.xml
Click to expand...
Click to collapse
Its Working Fine
Nurseto and vivek can u guys work together and put crt effect and overglow in the same mod.then it would be awesome.
Sent from my GT-I9003 using XDA App
rdr_m said:
Nurseto and vivek can u guys work together and put crt effect and overglow in the same mod.then it would be awesome.
Sent from my GT-I9003 using XDA App
Click to expand...
Click to collapse
i think framework.jar and framework-res.apk are independent
i've use vivek file and my file, it can work together
you can use vivek mod and my mod together, without interrupting each other
Great work dude
If this can be ported for the XXKB3, You sir are my hero. I want this so damned bad! GB is so dry! No themes makes it horrible to use :\ I hope in the future devs that Samsung will add the option to apply your own themes flawlessly and an option to select specific features. [CRT, Overglow]
Misledz said:
If this can be ported for the XXKB3, You sir are my hero. I want this so damned bad! GB is so dry! No themes makes it horrible to use :\ I hope in the future devs that Samsung will add the option to apply your own themes flawlessly and an option to select specific features. [CRT, Overglow]
Click to expand...
Click to collapse
Some said, this effect is hardcoded into the gingerbread itself.I don't think it will be easy to port Electron Beam Effect(this is how it named by android).
nurseto said:
Some said, this effect is hardcoded into the gingerbread itself.I don't think it will be easy to port Electron Beam Effect(this is how it named by android).
Click to expand...
Click to collapse
Lets just hope they don't turn into royal jackasses and remove it in the next release.
Heyy Guys! Just Like I said, I will extract the Swype from the Value Pack (XXLE4) for us! Now Here It Is!
SWYPE v3.26.92
(Extracted From XXLE4 Value Pack FW)
Requirements:
Sgs i9003
MUST Be Rooted
Root Explorer
Swype.apk & libSwypeCore.so (download links below)
Procedure: (ALWAYS, Backup files. Just in case!)
Download the 2 files given from the links below.
Open Root Explorer.
Paste the downloaded Swype.apk to "/system/app " folder.
Now paste the libSwypeCore.so to "/system/lib " folder
Close root Explorer and reboot phone.
LINKS:
Swype.apk : http://www.mediafire.com/?ogfjh1n223mcn77
libSwypeCore.so : http://www.mediafire.com/?37cwfig7t411i41
~~ENJOY!~~
Wahaha123 said:
Heyy Guys! Just Like I said, I will extract the Swype from the Value Pack (XXLE4) for us! Now Here It Is!
SWYPE v3.26.92
(Extracted From XXLE4 Value Pack FW)
Requirements:
Sgs i9003
MUST Be Rooted
Root Explorer
Swype.apk & libSwypeCore.so (download links below)
Procedure: (ALWAYS, Backup files. Just in case!)
Download the 2 files given from the links below.
Open Root Explorer.
Paste the downloaded Swype.apk to "/system/app " folder.
Now paste the libSwypeCore.so to "/system/lib " folder
Close root Explorer and reboot phone.
LINKS:
Swype.apk : http://www.mediafire.com/?ogfjh1n223mcn77
libSwypeCore.so : http://www.mediafire.com/?37cwfig7t411i41
~~ENJOY!~~
Click to expand...
Click to collapse
muchas gracias!!!!!!!!!!
Screenshots please? Been hearing the Swype from the Value Pack is really good, is it any different from the latest Swype beta?
BassBlaster said:
Screenshots please? Been hearing the Swype from the Value Pack is really good, is it any different from the latest Swype beta?
Click to expand...
Click to collapse
Well, the appearance changed alot, compared to our GB stock's Swype. Swyping seems quicker and the swype trace lines are thinner now. i am uploading the pictures already. ill update the thread immediately once it is done uploading.
SCREENIES:
Sorry guys, the real pictures are too big for a post. do just click the picture and it will bring you to the enlarged one
Flashable zip
http://www.mediafire.com/?b8g8zj2dodlrhq0
Very nice swype, ICS Keyboard style
TheFrankenstain said:
Flashable zip
http://www.mediafire.com/?b8g8zj2dodlrhq0
Very nice swype, ICS Keyboard style
Click to expand...
Click to collapse
Nice! may i update this here?
Will this work on AOKP? What are the file locations in AOKP?
Sent from my GT-I9003 using Tapatalk 2
Maraming salamat kabayan!
Thank you so much, my fellow countryman!
jesrani said:
Will this work on AOKP? What are the file locations in AOKP?
Sent from my GT-I9003 using Tapatalk 2
Click to expand...
Click to collapse
Hmm, i think so, but perform a backup before putting it in just in case. i'm not sure about the file location. i never used aokp for this phone yet...
Silentkiller101197 said:
Maraming salamat kabayan!
Thank you so much, my fellow countryman!
Click to expand...
Click to collapse
No problem pre! Mabuhay ang Pilipinas! (Long live the Philippines!)
Can you share me the font...?The font you used in CM9 is very cool.. Would be happy to try it out...
Thank you fellowmen... Mabuhay!
landono5 said:
Can you share me the font...?The font you used in CM9 is very cool.. Would be happy to try it out...
Thank you fellowmen... Mabuhay!
Click to expand...
Click to collapse
i used xxkpq w/ Poseidon rom + ICS theme v19 from tarunagg's thread. try flashing it, it will automatically have you in that font (i think it comes with ics theme...)
I am on ddf2 value pack, it fail to open english or spanish dicctionary , it works with arabic (i think it is arabic...)
any suggestions?
2009sebastian said:
I am on ddf2 value pack, it fail to open english or spanish dicctionary , it works with arabic (i think it is arabic...)
any suggestions?
Click to expand...
Click to collapse
Clear the application data, it will work hopefully.
mznk said:
Clear the application data, it will work hopefully.
Click to expand...
Click to collapse
you were right, thanks! :good:
This is a quick dev guide to enable navigation bar for S4. Tested on I9505 but should work here also.
Decompile SystemUI.apk go to res/values/drawables and add:
Code:
<item type="drawable" name="tw_navigationbar_bg">#ff000000</item>
Now download attached files and copy files to corresponding folders in SystemUI.apk if folder does not exist(drawables-xhdpi) create it.
Compile SystemUI.apk and push to device (nothing will happen yet) Just to check device boots fine.
Now use any buil.prop editor and add line:
Code:
qemu.hw.mainkeys=0
You can also enable it now through framework-res method.
Reboot and your done.
Please hit thanks and give credits.
There is no values folder in res.
Sent from my GT-I9500 using Tapatalk 2
adichandra said:
There is no values folder in res.
Sent from my GT-I9500 using Tapatalk 2
Click to expand...
Click to collapse
Have you decompiled systemui.apk ? Or you have just opened the apk file?
Sent from my Octa Core S4
Just opened the apk. I dont have any idea how to decompile that. Any guide?
Can you just serve the zip that i can easily flash in cwm?
Sent from my GT-I9500 using Tapatalk 2
systemUI
I have found this but when I click it the installation window opens. So should I proceed there? Please if you could add a few more steps to explain then noobs like us will be able to follow.
Thanks
ok now i know we have to use apktool etc. Most people couldnt get it working so what would be the best tool?
gharrington said:
This is a quick dev guide to enable navigation bar for S4. Tested on I9505 but should work here also.
Decompile SystemUI.apk go to res/values/drawables and add:
Code:
<item type="drawable" name="tw_navigationbar_bg">#ff000000</item>
Now download attached files and copy files to corresponding folders in SystemUI.apk if folder does not exist(drawables-xhdpi) create it.
Compile SystemUI.apk and push to device (nothing will happen yet) Just to check device boots fine.
Now use any buil.prop editor and add line:
Code:
qemu.hw.mainkeys=0
You can also enable it now through framework-res method.
Reboot and your done.
Please hit thanks and give credits.
Click to expand...
Click to collapse
Wonder how to do it if my rom is odexed ?
I dont think this thread is supported anymore
WOW!
This worked exceptionally well on my T-Mobile GS4 (M919).
I'll slip a thanks your way!
Please can you give details step by step for apks to use to compile and decompile etc for us simple people who want the navigation keys.
Thanks
Use this tutorial http://forum.xda-developers.com/showthread.php?t=2195680
For odexed rom don't care about odex file as you won't need to change smali files.
Styrke said:
Use this tutorial http://forum.xda-developers.com/showthread.php?t=2195680
For odexed rom don't care about odex file as you won't need to change smali files.
Click to expand...
Click to collapse
Can you post a pre-made SystemUI?
arian44 said:
Can you post a pre-made SystemUI?
Click to expand...
Click to collapse
Bump that...Tried figuring out decompiling myself, but it's a nightmare.
Tried decompiling and then following the instructions. Lots of hang ups. Isnt there an easier way?
Is there an easy way? Thanks
Enviado desde mi GT-I9500 usando Tapatalk
arian44 said:
Can you post a pre-made SystemUI?
Click to expand...
Click to collapse
I would second that as a request.
eldecanopy said:
Is there an easy way? Thanks
Enviado desde mi GT-I9500 usando Tapatalk
Click to expand...
Click to collapse
Add this to the end of the build.prop file in system/
qemu.hw.mainkeys=0
You have to use an alternate launcher though, but it works.
rohan999 said:
Add this to the end of the build.prop file in system/
qemu.hw.mainkeys=0
You have to use an alternate launcher though, but it works.
Click to expand...
Click to collapse
This used to work very well with S3 but did not work on i9500 S4. I'll try again.
I dont know how I changed permission but on S4 its showing read only and does not take changes . Can you please guide as to how you changed to read-write for build prop
No that doesnt work. Says systemUI has stopped. I remember that from last time and tried again through rom toolbar
can i use this method on 4.3 rom?
Maybe this should help....
http://forum.xda-developers.com/showthread.php?t=2014062
or maybe this, (this one is for ics but refer to the decompilation and recompilation using apk tool)
http://rohan999.wordpress.com/2012/03/31/how-to-enable-on-screen-ics-keys-on-any-ics-rom/
must have root/root browser
change attachment file name to SamsungIME.apk
replace system apps at /system/apps
change permissions to rw-r-r--
change ownerships to :root, :root
reboot
ENJOY!!!
Download--
https://drive.google.com/file/d/0B_Z9LO7EjUxcTm5wMjZGejZPYkE/edit?usp=sharing
What are the sound mods?
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Thank you very much I love it
derekmurray said:
must have root/root browser
change attachment file name to SamsungIME.apk
replace system apps at /system/apps
change permissions to rw-r-r--
change ownerships to :root, :root
reboot
ENJOY!!!
Download--
https://drive.google.com/file/d/0B_Z9LO7EjUxcTm5wMjZGejZPYkE/edit?usp=sharing
Click to expand...
Click to collapse
Can you instruct me on how to theme a keyboard?
DustinKimble said:
Can you instruct me on how to theme a keyboard?
Click to expand...
Click to collapse
Decompile the apk on the computer. You need the Android sdk and java sdk. Go to the resources folder go to the drawable folders. Change the .pngs to your liking and then recompile the apk and you're good to go =)
Anyway to turn the sound up a little bit
It's a trap!!
Thanks for this
I want this keyboard on my custom ROM. Will this work if I put the api in the root directory or is this only for stock rom?
What ROM versions is this compatible with?
D150shorty said:
What ROM versions is this compatible with?
Click to expand...
Click to collapse
Doesnt work with the NC2 roms i tryied it
Doesn't work on Sprint s5 port moar rom
Hi @all
I tried to edit others.xml to enable csc features with same method like on 5.1.1 but after reboot the features dont work. Is in 6.0.1 beta of samsung anything other to add csc features?
CRISSCROSS ROM FOR EVER. DOWNLOAD, INSTALL AND ENJOY
didnt played with it but have a look on feature.xml in system/csc
asc1977 said:
Hi @all
I tried to edit others.xml to enable csc features with same method like on 5.1.1 but after reboot the features dont work. Is in 6.0.1 beta of samsung anything other to add csc features?
CRISSCROSS ROM FOR EVER. DOWNLOAD, INSTALL AND ENJOY
Click to expand...
Click to collapse
Winb33 said:
didnt played with it but have a look on feature.xml in system/csc
Click to expand...
Click to collapse
There is no feature.xml
I used this features so much times on my rom but on this beta it didnt work. But why?
CRISSCROSS ROM FOR EVER. DOWNLOAD, INSTALL AND ENJOY
@asc1977 Humm ! Sorry ! I have it but probably as i mod my csc to be in XEF instead of BTU.
I' ve done a change to be sure where is it stored.
Activated Config AP detail info in csc feature apk from wanam .
The change is done and stay after reboot and the only file has changed at this time is feature.xml
So you can try something on your rom :
Create a file feature.xml in system/csc and apply a change in it to see if it work.
You probably know syntax for those file but i attach mine if need
good luck and tell me if it work
asc1977 said:
There is no feature.xml
I used this features so much times on my rom but on this beta it didnt work. But why?
CRISSCROSS ROM FOR EVER. DOWNLOAD, INSTALL AND ENJOY
Click to expand...
Click to collapse
Winb33 said:
@asc1977 Humm ! Sorry ! I have it but probably as i mod my csc to be in XEF instead of BTU.
I' ve done a change to be sure where is it stored.
Activated Config AP detail info in csc feature apk from wanam .
The change is done and stay after reboot and the only file has changed at this time is feature.xml
So you can try something on your rom :
Create a file feature.xml in system/csc and apply a change in it to see if it work.
You probably know syntax for those file but i attach mine if need
good luck and tell me if it work
Click to expand...
Click to collapse
Thx for help
I tried and work. Now i tried again and delete feature.xml and edited again my others.xml
First i tried with auto sort launcher and subsymbols. And than with shuttersound.
Now i see the problem. From thus three csc mods only work the shuttersound. The other both dont work anymore on 6.0.1
Can you test if work subsymbols and autosort launcher on yours 6.0.1
CRISSCROSS ROM FOR EVER. DOWNLOAD, INSTALL AND ENJOY
For subsymbols i dint find anything
for autosort launcher there is this entry :
Launcher_EnableViewByAlphabetAsDefault
you can try if its what your looking for
asc1977 said:
Thx for help
I tried and work. Now i tried again and delete feature.xml and edited again my others.xml
First i tried with auto sort launcher and subsymbols. And than with shuttersound.
Now i see the problem. From thus three csc mods only work the shuttersound. The other both dont work anymore on 6.0.1
Can you test if work subsymbols and autosort launcher on yours 6.0.1
CRISSCROSS ROM FOR EVER. DOWNLOAD, INSTALL AND ENJOY
Click to expand...
Click to collapse
Winb33 said:
For subsymbols i dint find anything
for autosort launcher there is this entry :
Launcher_EnableViewByAlphabetAsDefault
you can try if its what your looking for
Click to expand...
Click to collapse
I have this codes but dont work on 6.0.1
CRISSCROSS ROM FOR EVER. DOWNLOAD, INSTALL AND ENJOY