Database Info

Huawei ideos (u8150) drivers??

I've got a Huawei u8150 which I just rooted using z4root. Now I'm trying to put it into recovery mode using ultrajackrecovery but when I put it off then put it back on while holding the volume down and end key and connect it to my PC, it says Android 1.0 driver not found. PS. USB debugging is turned on. I need help in finding the right drivers and I'm using a windows 7 64bit pc. Thanks!
Sent from my Ideos using XDA App

Also when I open ultra Jack recovery, it just says "waiting for device".
Sent from my Ideos using XDA App

jstifler said:
I've got a Huawei u8150 which I just rooted using z4root. Now I'm trying to put it into recovery mode using ultrajackrecovery but when I put it off then put it back on while holding the volume down and end key and connect it to my PC, it says Android 1.0 driver not found. PS. USB debugging is turned on. I need help in finding the right drivers and I'm using a windows 7 64bit pc. Thanks!
Sent from my Ideos using XDA App
Click to expand...
Click to collapse
first of all install adb drivers...they are located at the cdrom partition of the device...when you connect it it should appear...then install those drivers...and boot into bootloader mode(redkey+vol down+power)....then manually install the android bootloader from the device manager...or intall pdanet on the computer and it will automatically install everything

i've done that and it was able to install some drivers when the phone was on. then i put it back off and tried restarting it using vol down and the end key but when it comes on, it still says android 1.0 driver not installed. and ultra jack recovery is also not recognizing it. i think it will after the android 1.0 driver has been installed but i cant find it.

manually install the driver!
right click computer,propeties,device manager..
look for android 1.0
double click it..
reinstall driver..
manually select driver..
look for android devices.
select android bootloader interface and install it.
it WILL work..
(i had the same problem)

THANKS MAN! IT WORKED!! now that im done with this, which rom would you suggest i install?? there's a lot all over and im confused about which one to go with.

maury1234 said:
manually install the driver!
right click computer,propeties,device manager..
look for android 1.0
double click it..
reinstall driver..
manually select driver..
look for android devices.
select android bootloader interface and install it.
it WILL work..
(i had the same problem)
Click to expand...
Click to collapse
thumbs up, thanks man, it worked for me tooo

cknaveed said:
thumbs up, thanks man, it worked for me tooo
Click to expand...
Click to collapse
thanks man, i have the same problem and ive searched the site and it lead me to your post... thanks! problem solved! =)

this doesnt work.
the computer cant find the drivers no matter what.
can you help me out and find me the drivers for it?
thanks.

when I plug in my U8150 I don't get the cd partition anymore I had it before but I disappeared suddenly... How can I get it back? I want to install the ADB drivers.
Thank you

TimG83 said:
when I plug in my U8150 I don't get the cd partition anymore I had it before but I disappeared suddenly... How can I get it back? I want to install the ADB drivers.
Thank you
Click to expand...
Click to collapse
This will solve your problem:
http://forum.xda-developers.com/showthread.php?t=995066

Trekker56 said:
This will solve your problem:
http://forum.xda-developers.com/showthread.php?t=995066
Click to expand...
Click to collapse
Great!!! Solved it indeed thank you!

finally solved...
great!!!!

help with toolkit

hey guys i got my nexus 5 yesterday and i wanted to root it . so i downloaded toolkit and installed everything . but whe i tried to unlock the phone it said it couldnt find the adb . so i followed the guid and i did everything by the book and in device manager it recognized it as a samsung android phone > google nexus adb interface . so i retried the unlock a few times and i got nothing again .
if anyone can help me it would be great .
if you need more info just ask

I've had good luck with the android nacked usb drivers, Google them. Then follow this guide http://forum.xda-developers.com/showthread.php?p=47025283

jd1639 said:
I've had good luck with the android nacked usb drivers, Google them. Then follow this guide http://forum.xda-developers.com/showthread.php?p=47025283
Click to expand...
Click to collapse
how do i install them ?

danielbr14 said:
how do i install them ?
Click to expand...
Click to collapse
In Windows device manger you probably have a usb port when an "!" On it. Right click it then manual install the usb drivers. You'll have to browes to whet you downloaded the drivers

jd1639 said:
In Windows device manger you probably have a usb port when an "!" On it. Right click it then manual install the usb drivers. You'll have to browes to whet you downloaded the drivers
Click to expand...
Click to collapse
it said that the drivers are already installed so what should i do now ?

danielbr14 said:
it said that the drivers are already installed so what should i do now ?
Click to expand...
Click to collapse
Google "nexus 5 diagnosing usb drivers xda"

why use a toolkit on a nexus device? its easier to root your nexus without a toolkit.
1. "fastboot oem unlock" via fastboot unlocks the bootloader.
2. flash a custom recovery via fastboot
3. flash the su binaries(supersu) in your new recovery.
4. reboot and profit, thats it.

danielbr14 said:
hey guys i got my nexus 5 yesterday and i wanted to root it . so i downloaded toolkit and installed everything . but whe i tried to unlock the phone it said it couldnt find the adb . so i followed the guid and i did everything by the book and in device manager it recognized it as a samsung android phone > google nexus adb interface . so i retried the unlock a few times and i got nothing again .
if anyone can help me it would be great .
if you need more info just ask
Click to expand...
Click to collapse
I used this...http://www.youtube.com/watch?v=KnlUdjUaD3Q
and this....http://www.wugfresh.com/nrt/
with zero issues
P.s.
I was a first time noob.

simms22 said:
why use a toolkit on a nexus device? its easier to root your nexus without a toolkit.
1. "fastboot oem unlock" via fastboot unlocks the bootloader.
2. flash a custom recovery via fastboot
3. flash the su binaries(supersu) in your new recovery.
4. reboot and profit, thats it.
Click to expand...
Click to collapse
might want to add after you unlock the bootloader to boot into the device once.

jd1639 said:
Google "nexus 5 diagnosing usb drivers xda"
Click to expand...
Click to collapse
i still can find a good answer on how to solve my problem.

danielbr14 said:
i still can find a good answer on how to solve my problem.
Click to expand...
Click to collapse
Do you have usb debugging enabled in developer options on your phone?

jd1639 said:
Do you have usb debugging enabled in developer options on your phone?
Click to expand...
Click to collapse
yes i do .

Zepius said:
might want to add after you unlock the bootloader to boot into the device once.
Click to expand...
Click to collapse
why? i didnt. my nexus 5 never ever booted up stock. before i ever booted it, it got unlocked and flashed first.

simms22 said:
why? i didnt. my nexus 5 never ever booted up stock. before i ever booted it, it got unlocked and flashed first.
Click to expand...
Click to collapse
what does it have to do with anything ??

danielbr14 said:
what does it have to do with anything ??
Click to expand...
Click to collapse
You're probably going to have to go into device manager, view hidden, and delete each usb port that is not being used and start over. Don't have your phone connected when you do this. It's a pita. Then reboot your computer, than plug your phone in. Also make sure you're using the usb cable that came with your phone and usb ports in the back of your pc

simms22 said:
why? i didnt. my nexus 5 never ever booted up stock. before i ever booted it, it got unlocked and flashed first.
Click to expand...
Click to collapse
some people have reported issues if you didnt let the device 'reset' itself after you unlocked the bootloader so it could rebuild the data partition.
its more of a precautionary thing than anything else.

jd1639 said:
You're probably going to have to go into device manager, view hidden, and delete each usb port that is not being used and start over. Don't have your phone connected when you do this. It's a pita. Then reboot your computer, than plug your phone in. Also make sure you're using the usb cable that came with your phone and usb ports in the back of your pc
Click to expand...
Click to collapse
you mean uninstall everything in the universal serial bu controller tree ?

danielbr14 said:
you mean uninstall everything in the universal serial bu controller tree ?
Click to expand...
Click to collapse
Yep, that's not currently being used. You don't want to lose your keyboard, etc.

jd1639 said:
Yep, that's not currently being used. You don't want to lose your keyboard, etc.
Click to expand...
Click to collapse
i dont know how to find wich one is in use and wich one isnt.

danielbr14 said:
i dont know how to find wich one is in use and wich one isnt.
Click to expand...
Click to collapse
The ones that are grayed out are not in use the darker ones are

[Q] Nexus 5 does is dead???

I installed latest CM rom and unfortunately xposed framework on top.
after that my device does not start and seems to stack in CM logo for ever.
I can get to recovery but does not find any backup files! Seems like scdard is empty or not recognizable.
I tried to push a new rom for with adb from fastboot but my pc does not seems to find the phone. Like adb debugging is not enabled on the phone.
I also fails when I try to erase the device from recovery.
Any help is welcome.

Boot in fastboot and flash a factory image. Best way to fix pretty much anything.

mortenmhp said:
Boot in fastboot and flash a factory image. Best way to fix pretty much anything.
Click to expand...
Click to collapse
does for find the device any more, so i cannot flash anything

Try to reinstall the universal drivers, and try different usb ports on your computer.

sprkrt said:
does for find the device any more, so i cannot flash anything
Click to expand...
Click to collapse
You need to make sure you're in the bootloader.

sprkrt said:
does for find the device any more, so i cannot flash anything
Click to expand...
Click to collapse
Hi, your phone is ok, just empty. the problem is on the computer. You need to fix the driver for nexus 5. You probably have them installed since you unlocked the phone. just keep your phone connected and on recovery mode.
go to device manager, look for nexus 5. Choose "update driver"
"Browse my computer for driver...,
"let me pick from a list of device drivers"
choose any ADB driver, and install it.
Many more ways to do it

sprkrt said:
does for find the device any more, so i cannot flash anything
Click to expand...
Click to collapse
If it can boot to the bootloader, and it still cant find the device, the problem is either with your computer(driver) or with the usb hardware on the phone(highly unlikely since it happened after you messed with software)

mortenmhp said:
If it can boot to the bootloader, and it still cant find the device, the problem is either with your computer(driver) or with the usb hardware on the phone(highly unlikely since it happened after you messed with software)
Click to expand...
Click to collapse
problem solved.
i tried the exact same process on my imac and worked perfectly!
( i had already reinstalled the drivers on my pc with no luck...)

sprkrt said:
problem solved.
i tried the exact same process on my imac and worked perfectly!
( i had already reinstalled the drivers on my pc with no luck...)
Click to expand...
Click to collapse
He he this deserves a headline
Apple recovered my nexus from death lmao
Glad that you worked it out.
Sent from my Nexus 5 using Tapatalk

Stuck With Boot Screen

I have Samsung Galaxt Tab 2 7". Yesterday to install custom firmware, I flashed some wrong recovery on it.
Now, when I turn it on it is stuck on Samsung Initial boot logo and stays there as long as possible.
If I turn it off and bring it to download mode (Press and Hold Power and Down Volume Key), it comes into download more but when connected to PC, it says USB Device Not Recognized.
I tried charging my Tab whole night, it became warm and till morning it was warm only. Now I am completely stuck and don't know what to do.
Is there any solution for this? Is there any button combination which can take the tab at-least to stock android?
Since USB is not been recognized, so I am helpless to do anything here.

Sent from my RM-917_nam_usa_100 using XDA Windows Phone 7 App

anshumangoyal said:
I have Samsung Galaxt Tab 2 7". Yesterday to install custom firmware, I flashed some wrong recovery on it.
Now, when I turn it on it is stuck on Samsung Initial boot logo and stays there as long as possible.
If I turn it off and bring it to download mode (Press and Hold Power and Down Volume Key), it comes into download more but when connected to PC, it says USB Device Not Recognized.
I tried charging my Tab whole night, it became warm and till morning it was warm only. Now I am completely stuck and don't know what to do.
Is there any solution for this? Is there any button combination which can take the tab at-least to stock android?
Since USB is not been recognized, so I am helpless to do anything here.
Click to expand...
Click to collapse
Hm, Odin needs Samsung USB Drivers to be able to recognize device, did you already install them?
If not, you can download it here.
(If you're using Windows 8, tell me, because you will need some special method to install the drivers.)

fr4n said:
Hm, Odin needs Samsung USB Drivers to be able to recognize device, did you already install them?
If not, you can download it here.
(If you're using Windows 8, tell me, because you will need some special method to install the drivers.)
Click to expand...
Click to collapse
Thanks, I have tried and it is the same. Yes, I am using Windows 8. Please let me know what special things needs to be done with this.
Thanks again. Your English is better than me, though it is also not my first language :laugh:

anshumangoyal said:
Thanks, I have tried and it is the same. Yes, I am using Windows 8. Please let me know what special things needs to be done with this.
Thanks again. Your English is better than me, though it is also not my first language :laugh:
Click to expand...
Click to collapse
I bet you tried to run the .exe file and the installation didn't even start, no? xD
Follow installation method 3 explained in this thread.
If you can't do it, let me know and I can help you!
I'm not pretty good with English too... I know only basic skills, but I bet I can't go to English-speaking countries with them :laugh:

fr4n said:
I bet you tried to run the .exe file and the installation didn't even start, no? xD
Follow installation method 3 explained in this thread.
If you can't do it, let me know and I can help you!
I'm not pretty good with English too... I know only basic skills, but I bet I can't go to English-speaking countries with them :laugh:
Click to expand...
Click to collapse
I followed all steps. But still I am getting my USB Device is not been recognized. It is showing "Unknown USB Device (Device Descriptor Request Failed)"
Till now I am unable to find any solution.

anshumangoyal said:
I followed all steps. But still I am getting my USB Device is not been recognized. It is showing "Unknown USB Device (Device Descriptor Request Failed)"
Till now I am unable to find any solution.
Click to expand...
Click to collapse
Hm, that was totally unexpected.
I hope I'm wrong, but it sounds like your board got damaged. But if the board was damaged, it won't ever turn on. So my mind is a bit twisted here.
I will try to look for solutions. For now, you're stuck with a paperweight :s

anshumangoyal said:
I followed all steps. But still I am getting my USB Device is not been recognized. It is showing "Unknown USB Device (Device Descriptor Request Failed)"
Till now I am unable to find any solution.
Click to expand...
Click to collapse
Do you have a Linux computer? Of you do, PM me and I will send you instructions that you can try to follow.
Sent from my SGH-T989

jrc2 said:
Do you have a Linux computer? Of you do, PM me and I will send you instructions that you can try to follow.
Sent from my SGH-T989
Click to expand...
Click to collapse
I don't have a linux computer. But I can install a virtual machine for that. Can you please send me instructions how to do that. Thanks again.

anshumangoyal said:
I don't have a linux computer. But I can install a virtual machine for that. Can you please send me instructions how to do that. Thanks again.
Click to expand...
Click to collapse
Sorry, I must have missed this post. I don't know if a VM will work or not. I think the problem is windows 8 as there have been lots of problems reported with Odin and Heimdall (probably the drivers) on windows 8.
Sent from my SGH-T989 using Tapatalk
EDIT: I have a thread in the general section for the tab 2 on rooting in Linux. Do everything up until flashing SuperSU. That thread has the instructions on how to install recovery. Still do it with no reboot checked and manually boot into recovery and wipe cache and Dalvik cache. Hope this helps!
EDIT 2: Here is the link to the thread: http://forum.xda-developers.com/showthread.php?t=2828080

Softbrick? some custom rom advice please

Hello everyone,
I have done something utterly stupid with my Nexus 5, I wiped the internal storage and lost my roms, I really wasnt thinking.
I have tried looking at options like adb sideload but cant find a decent tutorial
Could I just get a micro usb to usb adapter and install a rom off that?
Would anyone be able to point me in the right direction with adb sideload?
Other problems are I can't get on the android SDK because the CMD box only flashes up.
Does the adb sideload option in TWRP actually do anything if you wait for it? Its been waiting for about 1 hour now and nothings happening.
Please guys any help is appreciated

osamarchie2000 said:
Hello everyone,
I have done something utterly stupid with my Nexus 5, I wiped the internal storage and lost my roms, I really wasnt thinking.
I have tried looking at options like adb sideload but cant find a decent tutorial
Could I just get a micro usb to usb adapter and install a rom off that?
Would anyone be able to point me in the right direction with adb sideload?
Other problems are I can't get on the android SDK because the CMD box only flashes up.
Does the adb sideload option in TWRP actually do anything if you wait for it? Its been waiting for about 1 hour now and nothings happening.
Please guys any help is appreciated
Click to expand...
Click to collapse
Why don't you flash the factory image using fastboot?
The Cmd box you are referring to happens because you need to navigate to that directory using Cmd and run it from there. You cannot just click it.

Thanks but I cant get the SDK to work at all. Im still looking into it but at the moment it wont work

Please somebody help me with the SDK, I dont know what else to do.
I cant open the SDK manager and I cant open it through eclipse either.
Someone else must have had this problem before

Click the link in my signature and then "adb and fastboot. What is it?"
This will help you configure adb properly. It also helps you learn commands. Like adb push.
adb sideload is the same as push but you type sideload instead.
FYI as much as people round here say it, there is no such thing as a soft brick. Its brick or not brick.
Sent from my Nexus 5 using Tapatalk < Yes, I want you to know that I'm using a mobile client

Switched off my phone and now I cant get it into recovery mode. Only the google logo which just stays there for ages
What do I do now?

osamarchie2000 said:
Switched off my phone and now I cant get it into recovery mode. Only the google logo which just stays there for ages
What do I do now?
Click to expand...
Click to collapse
Show down and don't panic. Your device is easily fixed. Hold the power button for 20 seconds. This will shut down the phone. Then press and hold the vol down then press the power button. That'll bring your into the bootloader.
Sent from my Nexus 5 using XDA Free mobile app

osamarchie2000 said:
Switched off my phone and now I cant get it into recovery mode. Only the google logo which just stays there for ages
What do I do now?
Click to expand...
Click to collapse
Power + volume down button brings you in the bootloader, from there go into recovery (navigate with volume buttons and select with power button)
In recovery follow this guide: http://forum.xda-developers.com/showthread.php?t=2559200.
Or flash the factory image in the bootloader. (that should work because you need to unlock your bootloader in fastboot)

Thanks guys,
It wasnt working because water damage had interfered with the volume buttons previously.
I have a micro usb to usb adapter now.
Can i put a rom on a USB drive and install that way?
Thanks guys

osamarchie2000 said:
Thanks guys,
It wasnt working because water damage had interfered with the volume buttons previously.
I have a micro usb to usb adapter now.
Can i put a rom on a USB drive and install that way?
Thanks guys
Click to expand...
Click to collapse
Yeah that will work too. Water damage is never good for a phone even if it stil works after that. But that's another story

osamarchie2000 said:
Thanks guys,
It wasnt working because water damage had interfered with the volume buttons previously.
I have a micro usb to usb adapter now.
Can i put a rom on a USB drive and install that way?
Thanks guys
Click to expand...
Click to collapse
Yes you can. You'll have to "tell" twrp where to find the rom zip.
Sent from my Nexus 5 using XDA Free mobile app

Only problem now is I cant get the SDK to work for my life. Ive spent 5 hours trying to fix my phone already today, I have the JDK installed. I open the eclipse thingy and when i try to open the SDK with eclipse it wont work either. Please somebody help with this

osamarchie2000 said:
Only problem now is I cant get the SDK to work for my life. Ive spent 5 hours trying to fix my phone already today, I have the JDK installed. I open the eclipse thingy and when i try to open the SDK with eclipse it wont work either. Please somebody help with this
Click to expand...
Click to collapse
You don't need the SDK. You're not developing here
Sent from my Nexus 5 using Tapatalk < Yes, I want you to know that I'm using a mobile client

TWRP cant find any of the files on my USB-OTG

with the CMD, it gives me my device and its serial number and says recovery for
C:\adb devices
but for C:\fastboot devices
I get nothing.
Any ideas please?

osamarchie2000 said:
with the CMD, it gives me my device and its serial number and says recovery for
C:\adb devices
but for C:\fastboot devices
I get nothing.
Any ideas please?
Click to expand...
Click to collapse
Did you read my thread that I told you to read?
Sent from my Nexus 5 using Tapatalk < Yes, I want you to know that I'm using a mobile client

osamarchie2000 said:
with the CMD, it gives me my device and its serial number and says recovery for
C:\adb devices
but for C:\fastboot devices
I get nothing.
Any ideas please?
Click to expand...
Click to collapse
Here's a hint, read rootSU's sticky rollup and look for the 15 second fastboot adb installer.
Sent from my Nexus 5 using XDA Free mobile app

Very sorry, Ive just re-read what Im looking for
Appologies

thankyou all, phone is well and good and im on CM11.
Thanks guys, anyone who helped is the best