Related
Doesn't somebody on here have one? Does it cover the entire screen or does it fall short? Seems like this might be the best one available right now...
masse1369 said:
Doesn't somebody on here have one? Does it cover the entire screen or does it fall short? Seems like this might be the best one available right now...
Click to expand...
Click to collapse
Sure just got yesterday. In fact it covers all of the glass portion of the screen. For reference there is no reduction in touch sensitivity with the protector in place.
While I think the cost is high, Martin Fields protectors have always been high quality. This is no exception.
Awesome news! Thanks for the reply!
Is this a thick, flexible protector like Zagg or PhantomSkinz? Also, have you noticed any change in proximity sensor sensitivity?
For reference, I have a PhantomSkinz currently, and when I'm in a dimly lit room and make/take a call, and pull the phone away from my face, it stays blacked out. I have to turn the light on to get it to wake up. I took the skin off, and it went back to normal.
Can you test this if you have the MF protector?
Also, can you please post pics of the screen protector in place? I, too, am wondering about the precision of the fitment. PhantomSkinz, Seidio, and others seem to have missed the mark and cut the protectors to short in width AND height.
Edit: Also looks like the include a piece for the camera cover on the back...? http://www.martinfields.com/US/prod...oogle_Nexus&modeln=Nexus One&prod_type=screen
uansari1 said:
Is this a thick, flexible protector like Zagg or PhantomSkinz? Also, have you noticed any change in proximity sensor sensitivity?
For reference, I have a PhantomSkinz currently, and when I'm in a dimly lit room and make/take a call, and pull the phone away from my face, it stays blacked out. I have to turn the light on to get it to wake up. I took the skin off, and it went back to normal.
Can you test this if you have the MF protector?
Also, can you please post pics of the screen protector in place? I, too, am wondering about the precision of the fitment. PhantomSkinz, Seidio, and others seem to have missed the mark and cut the protectors to short in width AND height.
Edit: Also looks like the include a piece for the camera cover on the back...?
Click to expand...
Click to collapse
I originally had a Skinomi protector and never really thought it bad, however I decided I'd try the Martin Fields one because I've never used a static protector.
Looks
I must say I'm thoroughly impressed by this protector! It fits perfectly; well almost perfectly, looking closely, you can still see the edge but it is almost negligible. If I had to gauge how big the space is... maybe about the thickness of a sheet of folder paper... if even that.
Scratching
The protector itself is what seems to be a hard plastic. I haven't scratched it yet (it claims to be HIGHLY scratch resistant) but it's still worrisome. I've done a fingernail test as of now and it has survived. It makes no indentation like the "self healing" skins so I'm guessing if it does get scratched, it stays scratched.
Application
The really cool thing I like most though is the static cling application. I managed to get dust on it before applying it X_X. Using scotch tape though, I was able to remove it with no problems! After about 30 minutes (I decided to be really OCD about the application) it was air bubble free and dust free. Oh, I also decided to try and running it under water to clean it but I found the tape a MUCH better way to clean it.
Removal
Also, be careful when removing the protector. It says to use tape and pull it off at corner. I tried using my fingernail on the camera protector and it kind of warped lol. No real problem though, just looks like an air bubble under it however it isn't over the lens so no problems taking pictures.
Clarity
As far as the proximity sensor goes, I thought it wasn't configured properly but after switching protectors, it works perfectly (so Skinomi = no good, Martin Fields = awesome). Same goes with the camera; it takes crystal clear photos.
Daily Use/Misc
The feel of this protector is very nice; I think due to the hard plastic material. It really does feel like nothing is there. Looks wise, it's glossy, reflects a clear image of me when looking at it, and is PERFECTLY transparent. If matte anti-glare is your thing, this isn't your screen protector. Good comparison is Macbook Pro anti-glare/glass; matte vs colors really popping off the screen.
Another issue I have with screen protectors is how well I can flick/scroll, this protector has my stamp of approval. As I said earlier, it feels very similar to glass and as such, scrolling is a breeze.
Smudging is also handled pretty nicely, much better than the "self healing" stuff. I find myself wiping the screen down with my shirt maybe once a day, if even that.
In Conclusion
So, sorry for the long post, but I tried to cover as many bases as possible. My last sentiments for this protector:
10/10
+
Easy application
Washable
Fits very well over screen, minimal non-coverage
Can remove dust from "sticky" side
Crystal Clear/Perfect proximity sensor
Feels Like there is nothing there
Highly scratch resistant? (personally, only did fingernail test so "?")
Somewhat smudge resistant
==
Camera protector
No anti-glare (your personal preference, move to + or -)
Pricy? (16.99 USD + 9.99 shipping)
-
Can be bent and will not fit properly afterwards
P.S. - Shipping was 10 dollars, Fed Ex overnight I think. It came within 2 days for sure though.
P.P.S. - I will post pictures when I find a better camera. I don't have one that zooms in close enough to see the edges and the glare kind of ruins the picture :\
Ugh, I want to put down for this sheild but the only thing holding me back is it's not whole body protection!
Thank you for your review! I doubt anyone will have a problem with as details are what matters
Also can you include some random pictures from the Nexus with the Martin Fields Protecter on the camera? I saw the one on their page but i'm always skeptical
It sucks ! had one and started pelling after a week, I keep my phone in my pocket.....now I have invisible shield and THAT one holds.
xavina said:
I originally had a Skinomi protector and never really thought it bad, however I decided I'd try the Martin Fields one because I've never used a static protector.
Looks
I must say I'm thoroughly impressed by this protector! It fits perfectly; well almost perfectly, looking closely, you can still see the edge but it is almost negligible. If I had to gauge how big the space is... maybe about the thickness of a sheet of folder paper... if even that.
Scratching
The protector itself is what seems to be a hard plastic. I haven't scratched it yet (it claims to be HIGHLY scratch resistant) but it's still worrisome. I've done a fingernail test as of now and it has survived. It makes no indentation like the "self healing" skins so I'm guessing if it does get scratched, it stays scratched.
Application
The really cool thing I like most though is the static cling application. I managed to get dust on it before applying it X_X. Using scotch tape though, I was able to remove it with no problems! After about 30 minutes (I decided to be really OCD about the application) it was air bubble free and dust free. Oh, I also decided to try and running it under water to clean it but I found the tape a MUCH better way to clean it.
Removal
Also, be careful when removing the protector. It says to use tape and pull it off at corner. I tried using my fingernail on the camera protector and it kind of warped lol. No real problem though, just looks like an air bubble under it however it isn't over the lens so no problems taking pictures.
Clarity
As far as the proximity sensor goes, I thought it wasn't configured properly but after switching protectors, it works perfectly (so Skinomi = no good, Martin Fields = awesome). Same goes with the camera; it takes crystal clear photos.
Daily Use/Misc
The feel of this protector is very nice; I think due to the hard plastic material. It really does feel like nothing is there. Looks wise, it's glossy, reflects a clear image of me when looking at it, and is PERFECTLY transparent. If matte anti-glare is your thing, this isn't your screen protector. Good comparison is Macbook Pro anti-glare/glass; matte vs colors really popping off the screen.
Another issue I have with screen protectors is how well I can flick/scroll, this protector has my stamp of approval. As I said earlier, it feels very similar to glass and as such, scrolling is a breeze.
Smudging is also handled pretty nicely, much better than the "self healing" stuff. I find myself wiping the screen down with my shirt maybe once a day, if even that.
In Conclusion
So, sorry for the long post, but I tried to cover as many bases as possible. My last sentiments for this protector:
10/10
+
Easy application
Washable
Fits very well over screen, minimal non-coverage
Can remove dust from "sticky" side
Crystal Clear/Perfect proximity sensor
Feels Like there is nothing there
Highly scratch resistant? (personally, only did fingernail test so "?")
Somewhat smudge resistant
==
Camera protector
No anti-glare (your personal preference, move to + or -)
Pricy? (16.99 USD + 9.99 shipping)
-
Can be bent and will not fit properly afterwards
P.S. - Shipping was 10 dollars, Fed Ex overnight I think. It came within 2 days for sure though.
P.P.S. - I will post pictures when I find a better camera. I don't have one that zooms in close enough to see the edges and the glare kind of ruins the picture :\
Click to expand...
Click to collapse
Thanks so much for your thorough review. Two things though... first, can you please take a pic of the screen for us, especially showing how the fitment is? I believe you when you say it's just barely short, but am just curious. Second, I'm glad to know I'm not the only one who noticed a change in the proximity sensor with these thicker skins.
I'll almost certainly be ordering this product it looks like. One more thing... does it have a guarantee or anything?
Edit: Found this review with installation tips... seems to be just like a Seidio screen protector.
http://the-gadgeteer.com/2004/01/05/martin_fields_overlay_plus_pda_screen_protector_review_/
I've attached a few pictures of the phone and a few taken from the Nexus One
Screen protector
I tried to get as close as possible to the screen to show the edges (Don't mind the Skinomi skin lol).
The one of the camera protector seems clear, but there is one section that is discolored to the rest, that'll be the place I bent lol (bottom half when looking at the picture I took).
Pictures taken from the Phone
There are 2 pictures taken with the phone; one normal and one using the zoom feature.
The picture of the plants are closer, in mid/low light.
The picture of the mountain is further away and in bright light. It's not exactly clear because it's rainy/misty today, sorry for that one.
The last pair is of a magazine in little-no light using the flash as the only source of light.
Warranty
Regarding the warranty, I didn't see mention of anything so I can't really say. If I find anything, I'll be sure to post it.
Thickness
To me, it seems slimmer than the Skinomi Skin because I can feel it almost flush to the metal but it might be my imagination.
I can only upload 8 at a time, so I'll post the others in another post.
These are the remaining photos I took from the phone.
Wow... the fitment looks perfect man. Thanks very much for the pics. Still waiting to hear from Seidio, but this is the front runner. I'll order a new one this week. By the way, I'm jealous that you live near mountains.
Haha, yeah, living in Hawaii has its perks. Wish I could have taken more pictures but I just figured I'd get something posted asap.
If anyone would like to see any specific pictures/angles, I'd be happy to oblige. Like I said though, the camera I have isn't exactly great so quality is kind of lacking.
I'll post again later though seeing how someone had an issue with the protector peeling. I also put my phone into my pocket, so we'll see if it collects lint, peels, etc. So far, my Skinomi seems to be acting like a lint magnet so that may skew results lol.
One last thing of note, I've been hearing word that Martin Fields uses a mild adhesive. With this protector, I guess it's possible that a really mild adhesive is used but I know for sure it's static; depending on which side I'd place a strip of tape close to it, it would actually pull or push the tape in a certain direction. It didn't really feel sticky but I could definitely tell which side needed to be placed on screen; it wasn't smooth on one side.
I have an Martin Fields protector installed on my N1 as well. I'm pleased with it.
I agree with the review here, but I'd like to add that these things do get scratched quite easily. I have one on my G1 and it looks like sh*t after 6 months. It's scuffed and scratched like crazy. Since the MF protectors are not cheap, it's annoying to replace them, but they do their job quite well. Note that I keep my phone in my pocket, often rubbing against keys and coins.
I've had a MF protector on my digital camera for six months and it still looks new (and invisible.)
I always buy two-packs but I wish I could get 10-packs.
Hopefully they'll be available from vendors in the US soon, at lower prices and with cheaper shipping.
tehkseven's review of martin fields vs dcmugen (generic)
Bicster_ said:
I have an Martin Fields protector installed on my N1 as well. I'm pleased with it.
I agree with the review here, but I'd like to add that these things do get scratched quite easily. I have one on my G1 and it looks like sh*t after 6 months. It's scuffed and scratched like crazy. Since the MF protectors are not cheap, it's annoying to replace them, but they do their job quite well. Note that I keep my phone in my pocket, often rubbing against keys and coins.
I've had a MF protector on my digital camera for six months and it still looks new (and invisible.)
I always buy two-packs but I wish I could get 10-packs.
Hopefully they'll be available from vendors in the US soon, at lower prices and with cheaper shipping.
Click to expand...
Click to collapse
This sounds to be the exact same as dcmugen's screen protectors. It confirms the findings of tehkseven's reviews.
I really dont understand why anyone would pay five to ten times as much as one would need to... you all need to try out dcmugen's products because I really haven't found a seller with better quality to price ratio. Search 'epikcase' on eBay.
laughter95 said:
This sounds to be the exact same as dcmugen's screen protectors. It confirms the findings of tehkseven's reviews.
I really dont understand why anyone would pay five to ten times as much as one would need to... you all need to try out dcmugen's products because I really haven't found a seller with better quality to price ratio. Search 'epikcase' on eBay.
Click to expand...
Click to collapse
Link to dcmugen?
uansari1 said:
Link to dcmugen?
Click to expand...
Click to collapse
His ebay seller ID is dcmugen88
Thanks, will order some dcmugen88 product. The material sounds the same. His 5 pack is cheap! If it works ok I'll have a new protector every month instead of every year, lol.
I too just ordered (2) of the Anti-Glare ones from dcmugen for $4.49 shipped.
I will report back once I receive it and will give a review.
Just a follow up review, now that I've had the protector on for a little while.
I usually keep my phone in my shirt pocket but I decided to mix it up and
Throw it into my pants pocket (with keys) for the purpose of this review.
Looks
Still very impressed by the looks of the protector. Nothing has changed that
I can tell; no peeling effect, no lint collection (again, could be due to skin
protector lint collection lol).
Scratching
Haha, as mentioned by another reader, this protector does indeed scratch.
Now, here's the funny thing: It didn't scratch due to my keys, but rather my
cleaning cloth.
Some cleaning cloths burn the edges and while I'm usually
careful with those, I figured if this thing has been taking my keys, it should
be able to hold out; not the case.
It's a very deep scratch, so much so that I can feel it under my finger.
The cool thing is though, I cannot see the scratch under normal circumstances.
I can't feel it under normal use either.
Seriously though, I can't even see the scratch under daily use.
Only by flashing direct light can I see the scratch, and by moving my finger
slowly over it can I feel it.
Note: scratch is maybe 1/8th of an inch long.
Clarity
Screen still displays beautifully and pictures are still awesome.
Cleanliness
Still remains pretty clean throughout a few days, only wiping it down every
two or three days. Pretty darn good I guess.
Conclusion
While I'm sort of sick that it got scratched, it's so unnoticable that I haven't
felt the need to replace it. Don't know how long it will last, but if ever
I decide to replace it, I'll post again and give the reasons why.
I'm still quite pleased with this protector and I don't think I'll ever use
anything besides these static cling protectors (be it Martin Fields or another).
hey Xavina. Are you near kea'ahala pl? looks like the pictures are taken from my old house almost haha.
Nevermind. But the bkgrnd is close.
[/IMG]
My old driveway. Anyways off topic ... carry on.
Just applied the invisibleshield and im not too impressed.
First, the front and more so the back covers are too small and the corners of the phone is not covered. Second, the home key cover and camera lens cover are too big, so I avoided the home button cover and stuck the camera lens on by taking off the back cover. Third and finally the tacky feel means its a fingerprint and oil magnet, as I have sweaty hands this is especially annoying.
On the plus side it was relatively easy to put on and remove the bubbles.
sounds like you got the Full Body "Easy Install" version the Full Body "Maximum protection" version would have covered the corners, and have extended wings that goes up the sides.
same here i've a oily face / fingers, Zagg will not work for me as i've posted on other topic, I'll prefer the regular 3M PET screen protectors + a Gel case instead
Does it make the phone any less slippy to hold?
Ollie2 said:
Does it make the phone any less slippy to hold?
Click to expand...
Click to collapse
Yep definately, it has a good grippy feel and the orange peel effect is reducing . Now that ive had it on a few days im warming up to it surprisingly. The best thing is that it adds little thickness and I can just plop it on surfaces without worrying about scratches.
Overall i quite happy with it, I just wished I got the full body sh*t.
would u mind to put some pics ???
i've been looking all around to see some pics of zagg installed on galaxy s but no luck !!!
i had the invisi shield on my touch hd, so the first thing i did when i got home from getting my shiny new SGS was to order one, still not arrived and thats with 2-3 day delivery. i did the right thing and ordered the full cover as it was the same price as the easy install version, i will post pics when i have recieved it and have it done.
as for gel cases i have one of them on order also as it has done a wonderfull job of protecting my touch hd (till i drove over it)
i gave up on the zagg, samsung is release nice fashion faceplates for the SGS
and i'm already using those nice gel cases + screen protector, that's more than enough protection for the phone.
out of the box, the phone is already super strong, and anti scratch, did you see the video?
it will only break the screen if you drop it from a 1.5 m high
it may be anti scratch but ive scratched the proximity sensor area already so hopefully the shield will stop other scratches. I would use a gel cover but the shield really doesnt add anything to the thickness, while the cover would.
I get some pics up as soon as I can get hold of a camera.
shohid1234 said:
Yep definately, it has a good grippy feel and the orange peel effect is reducing . Now that ive had it on a few days im warming up to it surprisingly. The best thing is that it adds little thickness and I can just plop it on surfaces without worrying about scratches.
Overall i quite happy with it, I just wished I got the full body sh*t.
Click to expand...
Click to collapse
Thanks for the reply.
I've actually bought a silicone case and a screen protector for it and it's made it much more manageable and easier to hold and saved the phone when I dropped it the other day.
j_h3000 said:
would u mind to put some pics ???
I've been looking all around to see some pics of zagg installed on galaxy s but no luck !!!
Click to expand...
Click to collapse
1+
1+
1+
what about touch sensitivity?
I installed an invisibleShield as soon as the phone arrived. It's a pain in the ass to install as usual, and I was not able to make the top two corners look good. They've already started to peel off but I guess it's going to take a while before the back has to be replaced so I'm not going to worry about it.
Is it worth it? I'd say yes, even after a year you'll still have a phone that looks brand new. Now, the edges around the phone will probably get a couple of scratches because unlike the shield for the iPhone this one does not cover the chrome/metal/whatever bezel. Not a big deal if you ask me.
So, touch sensitivity? It's good. It's just as sensitive with the shield as without. Your fingers won't glide as well across the surface tho. One more thing which you'll see in the pictures; Dust usually collects around the edges of the shield, there is not much you can do about that. Trust me, the dust looks much worse in a picture than it does irl. You can barely see it.
Pictures:
Front:
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0003.JPG
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0004.JPG
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0005.JPG
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0006.JPG
Back:
http://dl.dropbox.com/u/999968/Automator Dropbox/IMG_0008.JPG
I ordered the full body shield as it was half price.
I just used cheap 6 for 1 ebay screen protector as this one has too much of a grip.
As for the back, as said above the top corners just will not fit completely and lift just a tiny bit at the tips.
Getting tiny bubble out results in the orange peel effect. This is because the shield is slightly rubbery and streches as you force out the bubbles.
IMO the shield protects very well, but I cant imagine ever getting the 'perfect' look with it on.
Its far from invisible, due to slight orange peel, minute bubbles which will only turn into more orange peel should I try to force them out.
If I ever buy one again, it will have graphics on it(they have those for iphone etc, perhaps the sgs is too new..) as then the slight imperfections would be less obvious.
Id rate the item 6/10. It doesn't protect the bezel or extreme corners and doesn't look great where it does protect.
thx for the pics. i got the same edge problems on my old iphone too. the zagg shield is ordered, i should get it next week.
MagicOnline said:
i should get it next week.
Click to expand...
Click to collapse
Don't count on it. I ordered mine on the 16th and I still don't have it (on the 25th).
i knew it would not cover the corners properly, it looks ugly when there are little pieces of plastic cropping out of the phone.
For the back I think the Zagg sheild is brilliant, almost full cover and invisible, with no extra bulk, and a little bit more grip.
For the front, I probably prefer a normal screen protector. My wife has a $1 screen protector from flea-baythat is much better to use (although needs more regular cleaning). The zagg is a little tacky meaning your finger doesn't slide as easily (not ideal for Swype).
Fitting:
I gotta confess that I didn't get the back perfect, but mainly because Ifit it in a dimly lit room, the cover edges are hard to see without bright light. I did get the corner 90% by using glad wrap (plastic wrap) tightly pulled over the corners and left overnight (saw this on a youtube demo video).
Also I once helped a colleague who fits 3m window film for a living. I noticed that he used a lot of liquid, so for the front I made up some more liquid, enough to refill the bottle Zagg provide. I used the whole bottle on the front, making fitting much easier, you can just slide tje cover around until it's perfect, then you just push out all the liquid. Using more liquid also seemed to help alleviate any bubbles. Also for the front I used a very bright light (480 lumens bike light) which made it much easier to see exactly where the edges were.
I'm also hoping that Zagg bring out the coloured/patterned backs, which in an email to me they said they would, then I'll use a regular screen protector for the front.
What is that liquid anyways?
I don't feel like it's a good idea to spray your device with something. When I put the shield on my iPhone I saw a couple of small droplets here and there enter the phone. I pushed some liquid near openings around the glass and some of it was sucked inside somehow. It hasn't damaged the phone, I still don't know if it can.
I just remixed a new solution: a couple of drops of baby shampoo with water in the bottle supplied. (I think you can use other stuff like washing detergent, but don't take my word, use google (3m film))
From the 3m website:
"3M™ Scotchtint™ Films are professionally applied by skilled, well-trained authorized 3M Dealers. Almost all of our films are designed to be applied to the inside of your glass.
The first step is to prepare the window area for the application; placing drop cloths on the floor protecting and/or moving furniture where necessary.
Next, the window glass is cleaned using simple cleaning solutions (often water and ammonia) and razor blade scrapers. Then the film is sprayed with a slip solution (detergent and water) for proper positioning, and applied to the window glass. Using a professional grade squeegee and following proper techniques, the application is completed by removing excess water, trimming the edges, and a final squeegee technique to dry the edges."
same here
liquid and electronics don't mix
i don't like the idea of having anything wet near my device.
WiseDuck said:
What is that liquid anyways?
I don't feel like it's a good idea to spray your device with something. When I put the shield on my iPhone I saw a couple of small droplets here and there enter the phone. I pushed some liquid near openings around the glass and some of it was sucked inside somehow. It hasn't damaged the phone, I still don't know if it can.
Click to expand...
Click to collapse
Just ordered and installed Realook screen protectors and I couldn't be more pleased. I have used other screen protection from Zagg and Sprint and I did not like them nearly as much. I will do my best to describe what its like but you really need to see it in person.
Feel:
The material is a firm plastic that when applied feels nearly the same as the bare glass. I did not like Zagg because it felt soft and textured like an orange peel. This stuff is 95% the same feel as glass and I waited 20 days before installing it, so I have a good level of comparison.
Look:
Clear as glass. I have not yet tested what effects it has on glare, but there is no noticeable difference indoors. Also it is ready to go 30 seconds after installing. All you need to do is push out the large air bubbles. It doesn't take 1 or 2 days to settle like some other protectors. Other people in this thread reported a rainbow reflection in the sun light when the screen is off.
Installation:
Before I started I ran the shower on hot to fill the bathroom with some steam to settle the dust. There is nothing that will bother me more than a single spec of dust under a screen protector, I will obsess about it to no end. Due to my rough and dry hands I am a dust machine and I have never failed to get at least 1 piece of dust under every screen protector I have installed. This time was no different. I mis-aligned the screen on installation and had to peel it back, when I did 1 spec of dust planted itself. I used a piece of tape they include in the box to peel back the screen, and another piece of tape to pull off the dust and it was clean. I am sooo happy about this point. Other protectors I used with adhesive would grab onto dust and never let go. Since it does not use adhesive so it is easy to put on and peel back off if you made a mistake.
The Bad:
Back button less responsive. It will still work on the first touch every time, but you do need to touch a little harder than before.
Box Includes:
2 screen protectors.
1 Wet wipe
1 Plastic card to push out air
2 pieces of tape(if needed)
1 microfiber cloth(to clean the screen before and after installation)
Sorry for the slightly blurry photos. Taken with another Epic4G and it doesn't like to focus on close ups.
$11 at Amazon
does it make the screen fuzy?
Perfectly clear. I wish I had a better camera to show it.
edit: I just discovered macro mode in the camera settings. I will post more photos soon.
Returned the Sprint speckled ones that was degrading display quality to the local Sprint store and am awaiting delivering of Realook for both Samsung Epic and Panasonic GF1 camera. Realook sounds like the best option and value out right now for the Epic until Steinheil Ultra Oleophobic is made available for comparison.
a holes wouldnt take mine back
+1 for Realook! Best screen protector i have used. Same experience as Pops.
I also went to Realook after Skinomi. Love Realook! Slick, smooth feel like the original glass. Relatively easy to apply. No screen degradation. Wonderful, all around.
does no opening for cam hinder it?
Anyone want to trade their spare ReaLook for a pair of PhantomSkinz screens?
I also have the Realook on my phone and it's absolutely great.
But since no one actually pointed out the cons, I'll try to list a few:
- It's not a PERFECT fit so you'll find gaps on all four sides. I'm concerned that dust may eventually get stuck in those gaps.
- I don't exactly remember how the bare screen was now that I have the Realook on, but I think the Realook makes the screen a little more "reflective".
- Under artificial lights (esp. fluorescents), you'll notice the interference patterns like straight rainbows. Hard to explain but people with screen protectors on any phone may have seen them before.
- The capacitive buttons become less responsive meaning that you'll have to push them harder.
churro7 said:
does no opening for cam hinder it?
Click to expand...
Click to collapse
Doesn't seem to. It is pretty optically clear. With 640x480, you probably wouldn't notice if there was any difference anyway.
tonysohn said:
I also have the Realook on my phone and it's absolutely great.
But since no one actually pointed out the cons, I'll try to list a few:
- It's not a PERFECT fit so you'll find gaps on all four sides. I'm concerned that dust may eventually get stuck in those gaps.
- I don't exactly remember how the bare screen was now that I have the Realook on, but I think the Realook makes the screen a little more "reflective".
- Under artificial lights (esp. fluorescents), you'll notice the interference patterns like straight rainbows. Hard to explain but people with screen protectors on any phone may have seen them before.
- The capacitive buttons become less responsive meaning that you'll have to push them harder.
Click to expand...
Click to collapse
I agree with all of those. I only have a gap on the bottom, though. Left and right seem to be exact.
I see the rainbow effect but it doesn't seem to cause any problem for me. I really don't notice it unless the display is off.
I do have the less responsive buttons, especially the back button. I'm wondering if I could slice off the bottom centimeter of the protector smoothly enough to make it worth trying.
Jason
I like it, but...
It's harder to clean than the Gorilla Glass of the Epic. It also has more friction than the Gorilla Glass. Your fingers won't glide across it as effortlessly. Finally, it has slightly rough edges that you can feel.
I should sell my unused RL screen for 5 bucks or something. Do people typically do that with their unused protectors?
Just ordered mine from amazon after reading this thread, i hope it is as good as you say it is. I have used Zagg a few times before, and Skinomi twice, and BodyGuardz on my nexus one. my favorite was BodyGuardz, but for 10 bucks i think it is worth trying this one. ill give feedback when it gets here in a few days.
If anyone wants another (good) opinion, here's a review from ppcgeeks.
I posted my review on realook a while back on ppcgeeks. Best protector ever IMO. http://forum.ppcgeeks.com/sprint-ep...king-screen-protector-tips-4.html#post1942030
Post #34
Sent from my SPH-D700 using XDA App
i use skinomi very nice and slick
I might give real look another chance but I used one on my touch pro 2 for a few months it looks and feels absolutely great however when i took it off today there was definitely some residue left behind. Swiping on the screen was not as smooth as when i first bought it. I just got my epic today and blew the installation of the clarivue protector. I don't think reallook has no adhesive, I think it has some adhesive so before I give them a try again i am gonna try boxwave and clarivue 1 more time.
the best protector IMO
I agree that the Realook protectors are the best. I installed mine a week ago and i'm really liking it. The look is awesome, the fit is perfect and it doesn't really have much more drag then the naked glass. The one issue is the fingerprints and oil residue. I can tell you that the phone is much more difficult to keep clean with the Realook, but that's not big of a deal. I used to just use my shirt or pants to wipe the phone clean, and now i have to use a microfiber. Even then it takes about two to three times the effort to get the oils off. I would still recommend this product.
I just got my real look in today (ordered thursday night) and i have a 10% off coupon code if anyone plans on getting one via amazon before the 30th.. pm me if anyone wants the code...
ordered from same link the OP posted $11 shipped so coupon will drop a buck off.. nothing much but I figured id throw it up here
UPDATE:the coupon is spoken for.
Ok i need to first say Pops_G you rock for informing me about this screen protector, and your method with the shower was genius, wish i did that when i installed all the other screen protectors in my past. On to my experience...
I just got the Realook Screen protector today, and i previously stated in a prior reply, i have tried zagg invisible shields, BodyGuardz ( OLD FAVORITE ) and Skinomi. The application of the Realook Screen protector was hands down, the Easiest ever, i didn't think it could go that fast. And in terms of how it looks and feels, I could not believe my eyes. You seriously cannot tell when looking at the screen that there is a protector on there. Zagg, Bodyguardz, Skinomi all have, in some regard, no matter how small, a orange peel effect, where there are small ripples in the screen from the water that is used in the installation process, they go away in time, but it is slightly noticeable. They also feel rubbery and take away from the graceful movements of the screen. Plus you have to turn off the phone, pull batter, use a water/soap spray mixture, worry about air bubbles, let it dry 24 to 48 hours, and wake a week plus for the solvent to evaporate. I had this Realook applied in 5 minutes, it would of been less, but i was super anal about making sure not a spec of dust was on the screen. lol.
Now this is just my first impression, after a hour or so of use. It is plastic which makes it feel very much like the original screen, although im sure that will allow the screen protector to scratch, unlike zagg, bodyguardz, and skinomis rubber film where they wont, unless you really try. And also it does show the finger oils more than the actual glass does. I am ok with this becasue that is the purpose of the protector, to get scratched and not the actual screen, Plus i have a backup because 2 came in the pack. GREAT DEAL. Second, i only see this screen protector working for phones that have a completely flat screen and have some sort of small lip around the phone. For Example: I dont think it would work best on a palm pre, which has no lip, and then it could be more easily peeled off down the line. But for the Epic 4g... Seriously im in love.
Thanks again Pops_G
Having used Martin Field Screen protectors in the past on all sorts of gear I jumped on them as soon as they became available for the N4. I now have both front and rear fitted and hears what I think.
As usual the material used is very good. Scratch resistant, smooth and doesn't seem to degrade the image at all.
Firstly, the rear protector. This comes with a cut-out for the flash but not the camera. I don't know whether this will really be a problem in practice as I haven't had time to take many photo's with it on yet.
Otherwise, the dimensional fit on the rear protector is great and you barely tell it is there.
Secondly, the front protector. As with other protectors I have tried (Terrapin), width wise this matches the active screen area so you can feel a slight ridge when you swipe on from the edge. Not really a problem in reality.
However the N4 screen, like the GNex before it has a slight roll off at the top and bottom which means that you cant really get edge to edge coverage with this sort of protector. What you have to live with is a slight unprotected border.
In this respect, the Martin Fields protector is a little too large top to bottom and when fitted doesn't sit flush with the screen for an approx 1mm along the top and bottom. You can't really see it face on but it will allow dust and fibres to work in if you keep it in your pocket.
I've emailed Martin Fields about it and they have requested some photo's so they can look into possible revising it. I've sent these to them now and I'll update when I get a further response.
Nice post. Any pics? Always liked MF stuff.
quahog_convo said:
Nice post. Any pics? Always liked MF stuff.
Click to expand...
Click to collapse
As MF may do something about the fit yet. I don't want to post pics of the issue as it would be bad publicity for them. Let's see what the come back with first, I'm confident that they will sort it out.
A pic of the back of the phone wouldn't help either, you really can't tell it is there.
I LOVE Martin Fields! Glad that it finally came out for the N4, but I already jumped on the too good to pass up 50% deal for ZAGGs. Couldn't wait any longer to leave my device unprotected.
Please update whenever you hear back from them
and here's the link for anyone who wants to order: http://www.martinfields.com/US/MFOP-GoogleNexus4
I bought these as well, pretty pleased with them, it's true that height wise it doesn't quite reach to the bottom (1mm short), it's not noticeable if you have a case that covers it. Certainly it isn't as bad as Terrapin, those were like half a cm short. The back protector is pretty much perfect, the cutouts align perfectly, you also get a separate protector for the flash.
Should also mention this does not come with a proximity sensor cutout, however, it works absolutely fine. I asked them before buying it and they assured me it would work.
If you're in the UK you can get these from a few online shops for around ~£16 so pretty decent.
at this price.. it's basically tempered glass price. With that said, anyone experienced both and do a quick compare/contrast?
There aren't any tempered glass protectors out yet are there? Wouldn't say it's in the same price range as tempered glass, you have to remember you get front and back.
i was just talking about comparing in general with devices that already has these on before and tempered. Right now, there aren't any tempered glass available yet, pre-order only.. There will be more tempered glass and once it's widely available, it will be around $20 or cheaper.
maxj3000 said:
I bought these as well, pretty pleased with them, it's true that height wise it doesn't quite reach to the bottom (1mm short), it's not noticeable if you have a case that covers it. Certainly it isn't as bad as Terrapin, those were like half a cm short. The back protector is pretty much perfect, the cutouts align perfectly, you also get a separate protector for the flash.
Should also mention this does not come with a proximity sensor cutout, however, it works absolutely fine. I asked them before buying it and they assured me it would work.
If you're in the UK you can get these from a few online shops for around ~£16 so pretty decent.
Click to expand...
Click to collapse
IMO, I think they need to be a bit shorter height wise so the edges adhere to the screen and don't sit proud. I don't think any dry application protectors would ever give complete edge to edge fit, they would always lift at the extremes due to the curvature.
I too have used Martin Fields screen protectors in the past & thought they were fantastic! I'm not that impressed with the fit of this one though.
I've fitted the Skinomi, which is a 'wet apply' one. It completely covers the screen, & was real easy to apply. So far it feels fine to use too.
Sent from my Nexus 10 using xda app-developers app
ChrisJ said:
Having used Martin Field Screen protectors in the past on all sorts of gear I jumped on them as soon as they became available for the N4. I now have both front and rear fitted and hears what I think.
As usual the material used is very good. Scratch resistant, smooth and doesn't seem to degrade the image at all.
Firstly, the rear protector. This comes with a cut-out for the flash but not the camera. I don't know whether this will really be a problem in practice as I haven't had time to take many photo's with it on yet.
Otherwise, the dimensional fit on the rear protector is great and you barely tell it is there.
Secondly, the front protector. As with other protectors I have tried (Terrapin), width wise this matches the active screen area so you can feel a slight ridge when you swipe on from the edge. Not really a problem in reality.
However the N4 screen, like the GNex before it has a slight roll off at the top and bottom which means that you cant really get edge to edge coverage with this sort of protector. What you have to live with is a slight unprotected border.
In this respect, the Martin Fields protector is a little too large top to bottom and when fitted doesn't sit flush with the screen for an approx 1mm along the top and bottom. You can't really see it face on but it will allow dust and fibres to work in if you keep it in your pocket.
I've emailed Martin Fields about it and they have requested some photo's so they can look into possible revising it. I've sent these to them now and I'll update when I get a further response.
Click to expand...
Click to collapse
Hi Chris,
Just got my Nexus 4... finally...
Bought a wet screen protector that I will probably not apply.
Used Martin Field's before and I now I wonder if you received any news from them and how is everything going after using it for 6-7 weeks.
Any problems with the camera being covered?
Looking forward to your feedback.
maxj3000 said:
There aren't any tempered glass protectors out yet are there? Wouldn't say it's in the same price range as tempered glass, you have to remember you get front and back.
Click to expand...
Click to collapse
Clarivue and XGear both have tempered glass shipping between Feb 15 and March 1.
Sent from my Nexus 7 using xda app-developers app
tl;dr...Bad quality, high price
Picked this up as a stop-gap until I can find something better, so please feel free to post your experiences with other brands/types of screen covers.
The two non-shock-absorbing protectors cost $15 and all you get is 2 protector films, and a dust peeling sticker. It was supposed to some with a micro-fiber cloth, but that was AWOL in my order for some reason. Disappointment right off the bat. Instructions were a little weird and somewhat out of order, but this isn't rocket science, you'll figure it out. Cleaned the phone, lined up the film to see how it would fit when I was done and was pretty sad to discover that it left a lot of bezel un-protected around the edge, while managing to get uncomfortably close to the camera and speaker grills. My alignment wasn't super-duper perfect, but acceptable considering the overall lack of quality that this cover exudes. I think the worst part, having completed the install, is that the film doesn't fully adhere at some of it's edges. This leaves a lighter colored edge in some spots, but it also allows dust to slip under and get between the film and the screen. Don't waste your money.
I'd post images, but I can't. Thanks spammers! You're ruining it for the rest of us!
Re-sized the images and uploaded as attachments for ya
Thanks for the pics. I got the clear ones and so far I've only got an email saying my shipping is delayed. I'm gonna be super mad if they are of this quality.
Sent from my XT1097 Victara
I'm surprised. Power Support usually make some of the best (non tempered glass) screen protectors in the world. They used to be the only ones sold in Apple Stores too. My matte film on my iPhone 5S was amazing.
Did you use both of the protectors?