My operator don't support MEID, and I need switch Motorola DROID from MEID to ESN only mode.
Launched QXDM, pressed F11, and then at the command prompt:
1. spc 000000 - OK
2. RequestNVItemRead scm - get scm = 0xB8
3. RequestNVItemWrite scm 0x28 - OK
4. RequestNVItemRead scm - get scm = 0x28
But after reboot scm = 0x38. What am I doing wrong? DROID just does not save settings authorization for EVDO, after a reboot everything is resets to Verizon's login and password.
Can anyone help with this?
Info
Rusher said:
My operator don't support MEID, and I need switch Motorola DROID from MEID to ESN only mode.
Launched QXDM, pressed F11, and then at the command prompt:
1. spc 000000 - OK
2. RequestNVItemRead scm - get scm = 0xB8
3. RequestNVItemWrite scm 0x28 - OK
4. RequestNVItemRead scm - get scm = 0x28
But after reboot scm = 0x38. What am I doing wrong? DROID just does not save settings authorization for EVDO, after a reboot everything is resets to Verizon's login and password.
Can anyone help with this?
Click to expand...
Click to collapse
Check out these two links. The 1st is changing esn with free/demo software on blackberry. The second is changing the meid and also an option of switching from esn to meid mode on the htc hero. Also, someone I know used a combination of the two to change the meid of the HTC Eris. I know the way the second link changes from meid to esn modes may be very similar or the same, but the point is try different things or combine methods. Even though the HTC Eris is very similar to the HTC Hero it took a combination of techniques to change MEID. And know it was more difficult than changing the memory address to those of the Eris. The links are from google's cache so you do not have to worry about logging in and having enough posts to view links etc....
Sorry... couldn't post the links b/c my account is new. I will PM the links to you.
can you help me out with the links too, i have the same problem as below
Quote:
Originally Posted by Rusher View Post
My operator don't support MEID, and I need switch Motorola DROID from MEID to ESN only mode.
Launched QXDM, pressed F11, and then at the command prompt:
1. spc 000000 - OK
2. RequestNVItemRead scm - get scm = 0xB8
3. RequestNVItemWrite scm 0x28 - OK
4. RequestNVItemRead scm - get scm = 0x28
But after reboot scm = 0x38. What am I doing wrong? DROID just does not save settings authorization for EVDO, after a reboot everything is resets to Verizon's login and password.
Can anyone help with this?
Check out these two links. The 1st is changing esn with free/demo software on blackberry. The second is changing the meid and also an option of switching from esn to meid mode on the htc hero. Also, someone I know used a combination of the two to change the meid of the HTC Eris. I know the way the second link changes from meid to esn modes may be very similar or the same, but the point is try different things or combine methods. Even though the HTC Eris is very similar to the HTC Hero it took a combination of techniques to change MEID. And know it was more difficult than changing the memory address to those of the Eris. The links are from google's cache so you do not have to worry about logging in and having enough posts to view links etc....
Sorry... couldn't post the links b/c my account is new. I will PM the links to you.
? all you did was quote the people above...
Were you able to figure this out, I have the same problem, and cant change the meid, I would appreciate it if you could pm me with any help, thanks
krat said:
Check out these two links. The 1st is changing esn with free/demo software on blackberry. The second is changing the meid and also an option of switching from esn to meid mode on the htc hero. Also, someone I know used a combination of the two to change the meid of the HTC Eris. I know the way the second link changes from meid to esn modes may be very similar or the same, but the point is try different things or combine methods. Even though the HTC Eris is very similar to the HTC Hero it took a combination of techniques to change MEID. And know it was more difficult than changing the memory address to those of the Eris. The links are from google's cache so you do not have to worry about logging in and having enough posts to view links etc....
Sorry... couldn't post the links b/c my account is new. I will PM the links to you.
Click to expand...
Click to collapse
Please also send me links on [email protected]
Motorola Droid MEID Changing or Removal
Anybody have a solution of removing MEID or changing MEID on Motorola Droid PLEASE mail me [email protected] or update me
Thanking the person in advance
can you please PM me links too? or send them at [email protected]
nakamoniel said:
can you please PM me links too? or send them at [email protected]
Click to expand...
Click to collapse
any development on this? I'm definitely in need of guidance with the moto droid and meid
[email protected]
can you pm me the link thanx! dude!
[email protected]
I need help with this aswell
Hi, I would like to get this links to this info aswell.
Thanks
[email protected]
droid on bell
@labellee25 - are you having any issues with your droid on bell? does everything work, voice and data?
links
My operator don't support MEID, and I need switch Motorola DROID from MEID to ESN only mode. same situation... anybody got those links?
not possible
As of today in this whole world it is not possible to change the MEID of Motorola Droid. So all people out there stop expecting the unexpected and get ur MEID registered to your service providers network .
Thats is the only option, nothing more or nothing less
ihave a droid original .. a855 .. cdma verizon ... frg83d.. c.01.43.01p
i believe my scm is 0x2A
and are you rooted and in diag mode when u r trying to do this?
Meid? to esn mode?
Hey everyone, anyone figure out how to change to esn mode?
i have a droid a855 as well.
can you pm me the link thanks!
[email protected]
madhakin said:
ihave a droid original .. a855 .. cdma verizon ... frg83d.. c.01.43.01p
i believe my scm is 0x2A
and are you rooted and in diag mode when u r trying to do this?
Click to expand...
Click to collapse
this is the moto photon right ??? if so i am feverishly trying mine is sprint and i'm trying to go to boost but i have not been able to finds a guide ??? PLEASE ADVISE THANKS TO ALL
Can you pm the links also... thanks!
did anyone find a guide to change esn on motorola photon?
I paid a non-corporate MetroPCS store to flash 4 Sprint CDMA Hero's to MetroPCS and add the ESN's into the system, I walked out with 4 working phones.
After having the phones for a while, I was playing around with one of them as I was learning how to install ROM's and such and in the process the phone somehow got set back to its like new state.. as in original phone number, all Metro info was gone, including MMS and Internet. If I tried to place a call I got the standard Sprint "your account can not be validated" recording.
After playing around for a couple of days I can place a call to 611 (Metro CS) and it recognizes my phone and my account, however that's the only number I can call. If I try to call a regular number I get a strange recording asking me if I want to place a collect call.
I know in order to get my phone working I need the following information:
SID/NID pair I have the correct information entered into the phone
MDN/MIN pair <------ I suspect this is where my problem is.
I called Metro to get my MIN, its not the same as my phone number and its not the original phone number. I cannot figure out the correct place to enter this information.
I have tried in CDMA workshop, QPST tools and DFS CDMA tools. These programs can be very confusing with MIN's and True MIN's, the list goes on.
I have flashed my phone to and old stock Sprint 2.1 ROM (NFX) so that I could enter the programming codes and such. Link to the ROM
http://forum.xda-developers.com/showthread.php?t=849024
I am only concerned with getting voice working for now, I might be able to do the rest on my own.
Any help is greatly appreciated.
Thanks.
Edited to add that I do have a MetroPCS prl file installed.
Edit 2 to add that this cant be done. When the phone was originally flashed the guy didnt use my phones MEID for whatever reason.. therefore the phone is not in the MetroPCS system. I tried to get the info from MetroPCS but no dice.
I will not go back to the same place to get it fixed.
Note to admins: Please move this thread to the thunderbolt section, as a new member I can only post in this section.
No one was sharing this technique, only trying to sell it.... I work in the cell phone/tech industry too (hxxp://benjamincomputerrepair.com) but if someone is competent enough to do it on their own, why not let them instead of being a jew?
note to admins: THIS IS NOT INSTRUCTIONS ON MEID CLONING, this specificly tells you to use noones meid except your own so this is not considered cloning by any means!!!!!
First of all, be sure to write value "01" to NV ITEM 0855 (I used DFS CDMATOOL) on both modems to enable QPST.)
Follow the directions in this post to change your MEID to the 9900 MEID that appears on your 9k modem (in nv_only mode, NOT the A100 meid in ruim mode). I used DFS's write button (after zeroing out and rebooting) instead of the "requestnvitemwrite meid 0x00#####" method. This post describes the A0XXXX MEID for some reason, but I used my 9900 meid.
POST#29426 in the Full Flash thunderbolt thread
How to Full Flash Htc Thunderbolt (Almost)!!!!!
You can skip the QXDM part and just use DFS to write 0 as your meid first, then write 9900 MEID (from your 9k modem) to the phone's normal diag port.
Also, DO NOT use any MEID other than one already found on your phone, or else it is a FEDERAL CRIME. No, im not joking, its call cloning and its VERY illegal.
amft from cricketusers.com said:
If you connect to the 9K diag port in CDMA WS 3.5+ and read you should get an actual MEID, this can then be used as the MEID on the account.
I would suggest doing this before the Data settings above.
The problem comes in because the Thunderbolt has two radios (hence the two ports) and the 1X and/or Voice radio only has an IMEI.
If you use QPST EFS Explorer you can add a directory named 'opensesamedoor' and it will unlock the NVM folder, this allows you to copy NV item 0 and 1943 to your desktop (drag & drop) and then delete them from the phone.
Use a hex editor to edit the two files changing any numbers or letters to zeros. After editing the files you can right click in the folder and add them back from the computer.
After a manual reboot, open QXDM and type 'RequestNvItemRead Meid' if it shows zeros type 'RequestNvItemWrite Meid 0x00XXXX' <-your Meid.
Reboot manually and your Thunderbolt should have it's actual Meid under the About Phone menu.....
I'm not responsible for any damages to your device.
I haven't tried the conversion method but I'm sure it works too.
Click to expand...
Click to collapse
Then dial *#*#4636#*#* and set your mode to CDMA/LTE EvDo auto (settings may vary for different roms/people), and under wireless and networks, your mode to CDMA Only and roaming to Automatic.
I'm using 45722.prl
You must set your APN's correctly! And to remove Verizon's restrictions on your APNs, I deleted "mandatoryapnlist.txt" in the EFS, I also deleted the LTE folders in my EFS.
BE SURE TO WRITE ALL SETTINGS TO BOTH MODEMS, and put your 9k modem in HDR mode, and the normal modem in CDMA IS2000 mode.
(use
cdmatool.com
DFS CDMATOOL and QPST EFS Browser (google "QPST 355 mediafire" without quotes to find a direct link to QPST (should be first result)
From there you follow the any normal flashing tutorial, except for the changes I mentioned above.
I AM NOT RESPONSIBLE IF YOU F*CK YOUR SH*T UP, OK?! FOR ALL I KNOW YOU MIGHT BRICK YOUR SH*T BUT YOU BETTER NOT BLAME ME.
edit: I know your MEID may have appeared the same/similar before, but for some reason doing this stops your 9k meid from switching.....
Heres a little treat, MR2.5 MDM9K Patched for 3g, I patched it myself with a hex editor, but credits go to either some chinese dude who posted this fix or the guy who posted this in the thunderbolt thread at cricketusers.
http://benjamincomputerrepair.com/adminuploads/PATCHED MDM9K PG05IMG.zip
If this guide helped you flash your HTC Thunderbolt with 3g, if you want to help me out you can click this link to donate to my business:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=2UYFHRQTANPEL
Bump. Move this to the thunderbolt section already....
Sent from my BAMF HTC Thunderbolt using tapatalk
I have been able to get 3g and calls and text working but call will drop and are breaking up. I was only able to get the nvm folder unlocked on the regular diagnostic modem with the a000 meid but not the 9k modem with the 9900 meid and was wanting to know if thats why my phone is acting the way it is.
I have tried using cdma auto prl and cdma- lte/evdo auto but still doesnt help. When I bought the phone it didn't come with a sim but had a few around and I have to have them in in order to make a call but the signal keeps droping in and out and very choppy. In order to unlock the 9k modem do I have to have the original sim? Any help would be awesome cause I am stumped right now and out of options
Help 3g
hi guys ive followed the guide but not getting 3g yet, can you guys help me out with this, also i have unlocked the nv folder. any help would be really apreciate it
Thanks in advanced
I have a tremendous brain cramp. After days of toiling, I am stuck trying to get 3g to work. I have 1x. No idea what I'm doing wrong. Can anyone help me?
Ok I have a Evo 3D flashed to boost. I did it myself. Heres exactly how I flashed it:
1. Activated Incognito Donor and let the prl update.
2. Heres where Im kind of confused. I'm using CDMA Workshop 3.8.3 and qpst and qxdm. I read the nv items. I was told it should take a little while to read them. Mine dont. Takes like 10 seconds to read 465, and 466 and 1 second for 1192,1194. For my range I put 465-1194. Is that what I'm doing wrong? When I read 465-465 it reads very fast. Lastly if I read 465- the numbers already there which is 65535 it gets t0 %76 and says phones does not answer. Does it everytime even when I restart the incognito a million times.
3. I read Nams 1 and 2.
4. Read meid and obtained the SPC Code.
5. I studied profiles 0 and 1 tot he T.
6. Obtained the aa and aaa keys. for profile 1 is the aaa keys 12 digits or 6. That also confused me in the guide.
Evo:
1. **Repaired MEID**
2. Wrote NV Items 465,466,1192,1194. I wrote the NV items that took 15 seconds.
3. Wrote SPC code
4. I didnt write the nam files i just did the ##786# reset then wrote the spc code again and restarted phone and let it activate then canceled the PRL update.
5. Wrote the aa and aaa keys to profiles 0 and 1.
6. fully activated and stuck on 1x data speeds. Im on a stock rom (but even on a 4g evo rooted even tried multiple roms im still on 1x.)
Ive tried some methods such as change the proxy ip to 0.0.0.0 then http proxy port to 0. Didnt help at all.
Also tried going into EVDO and changing it from Automatic to CDMA Only. Still on 1x.
PLEASE HELP IVE BEEN LOOKING FOR ANSWERS FOR MONTHS AND NOTHING!!!! THANKS SO MUCH!
We want to use Nexus 5 or other carriers CDMA network, e.g. China Telecom, but according recent information recent, seems Nexus 5 used NV subscription mode, that means get ESN code from NV, this is method used by Sprint.
Is there any possibility to switch the subscription method to RUIM mode to get ESN or pESN code from RUIM?
I suspect this is the key to enable it on other carriers network besides change MEID or IMEI directly in NV ROM.
Does it work to add codes below in build.prop?
ril.subscription.types = RUIM
Look for your kindly help.
Thanks in advance.