Related
Does anybody else have the rainbow effect happening to the screen protector on the Otterbox defender, also does anyone know how to fix it? (other than the baby powder trick)
Thanks in advanced
Sent from my Speak and Spell
danny39 said:
Does anybody else have the rainbow effect happening to the screen protector on the Otterbox defender, also does anyone know how to fix it? (other than the baby powder trick)
Thanks in advanced
Sent from my Speak and Spell
Click to expand...
Click to collapse
afaik the only effective way to get rid of the watermarks is to use baby powder. but its not like you actually put baby powder on it. What you do is, you grab a "bottle" or whatever its called of baby powder. Without opening the lid, shake it vigorously. This gets all the particles to create a mist inside the bottle. then, take your front otterbox piece and unscrew the baby powder. hold the bottle upright and from about half a foot away, gently squeeze the baby powder upwards onto the inside of the otterbox screen. Just squeeze enough so you can slightly see some smoke come up. Then you're done!!! It doesnt look like it did anything, but once you put the case on, it does wonders..
Hope that helped!!
ethantarheels123 said:
afaik the only effective way to get rid of the watermarks is to use baby powder. but its not like you actually put baby powder on it. What you do is, you grab a "bottle" or whatever its called of baby powder. Without opening the lid, shake it vigorously. This gets all the particles to create a mist inside the bottle. then, take your front otterbox piece and unscrew the baby powder. hold the bottle upright and from about half a foot away, gently squeeze the baby powder upwards onto the inside of the otterbox screen. Just squeeze enough so you can slightly see some smoke come up. Then you're done!!! It doesnt look like it did anything, but once you put the case on, it does wonders..
Hope that helped!!
Click to expand...
Click to collapse
I did that on the original iphone Otterbox, I was just looking for a way to avoid it, thanks anyway
Sent from my Speak and Spell
The rainbow effect actually stopped after about 2 hours of the case on the phone.
Sent from my Speak and Spell
Does your defender fit tight on the phone. Mine feels loose at the edges and the screen cover greatly reduces touch sensitivity. Just wondering about your thoughts.
Sent from my HTC One X using xda premium
Intub8 said:
Does your defender fit tight on the phone. Mine feels loose at the edges and the screen cover greatly reduces touch sensitivity. Just wondering about your thoughts.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Mine fits perfectly. Games play great and touch sensitivity is fine
Sent from my Speak and Spell
I hated that Rainbow effect so I just ended up ordering Zagg invisible shield and removing the otterbox screen...screen is much better!
I just cut the screen protector out of my defender case. Freaking awesome. Still protected against drops, bit without screen issues.
Sent from my HTC One X using xda app-developers app
How do u get rid of rainbow affect? A quick way
So I just got this screen protector today and it does look amazing ill admit. The problem is it does not seem like the top part of the protector wants to attach to the phone as if there is no adhesive. This is mostly my fault ill admit. I put it on wrong and what i did was take the bottom of nail and peeled it up and tried to re apply to adjust it. Is there any way I can maybe re ad the adhesive and how can I safely get off any lint or w/e that may have gotten onto the bottom of the screen protector? I already opened a ticket to spigen but I heard that their customer service is crap so I just wanted to see if there was anything I could do in the mean time.
blackguy101 said:
So I just got this screen protector today and it does look amazing ill admit. The problem is it does not seem like the top part of the protector wants to attach to the phone as if there is no adhesive. This is mostly my fault ill admit. I put it on wrong and what i did was take the bottom of nail and peeled it up and tried to re apply to adjust it. Is there any way I can maybe re ad the adhesive and how can I safely get off any lint or w/e that may have gotten onto the bottom of the screen protector? I already opened a ticket to spigen but I heard that their customer service is crap so I just wanted to see if there was anything I could do in the mean time.
Click to expand...
Click to collapse
No such luck. They uses special adhesive. No way to remove dust. You have to be extremely careful when applying this glass protector....
Sgp won't help you because it's your fault for applying it incorrectly.
Sent from my Galaxy S too!
lambstone said:
No such luck. They uses special adhesive. No way to remove dust. You have to be extremely careful when applying this glass protector....
Sgp won't help you because it's your fault for applying it incorrectly.
Sent from my Galaxy S too!
Click to expand...
Click to collapse
Even if i just got the product there is nothing i can do to get a replacement? I mean isnt there like a 30 day thing if im not satisfied?
Yes there is, but you have to pay half of the price to get a new one
Sent from my SGH-M919 using Tapatalk 2
hmm ok well it cant be helped then :/ I really wanna like this product so i guess I dont mind doing that. sucks that they just take so damn long to ship -_- wish I could just pick it up at best buy or something
blackguy101 said:
hmm ok well it cant be helped then :/ I really wanna like this product so i guess I dont mind doing that. sucks that they just take so damn long to ship -_- wish I could just pick it up at best buy or something
Click to expand...
Click to collapse
Yeap, http://www.spigen.com/need1more
You have to be quick, there is a 30days time frame from when you purchased.
I must be just as bad. This is the most frustrating screen protecter to apply. I've been known to mess up once but never had this much problems. It floats off center, fingers holding it and getting in the way. Front plastic made it hard to estimate the edge with the rounded corners, getting caught as well on fingers as I let go pushing it slightly to one side. Unable to pry it back up without barely scraping the adhesive ruining one corner if not multiple edges from micro fuzz etc. The squeegee is worthless on the glass, back protector is fine but just have to deal with it.
Must be me. Oh well. Good thing I get the cheap ass protector with my Neo Hybrid case.
You tried the masking tape method?
Align it the screen protector without peeling off the back cover. Once it's in place, use making tape to hold it in place, like a book. Put some a strip from the front down across onto the phone. You should be able to "open" it like the page from a book. Then apply it. Should make things easier.
a Good company will stand behind their products. After seeing my brother's Hybrid case and reading some things on their customer service, I chose to pass on Spigen.
The clear coat on his bumper part is already chipping way, the whole thing looks like a cheap Chinese knock off ( bought directly from Spigen).
Zagg for example, a product I don't recommend at all because 1) It's a horrible product 2) it's ridiculously expensive. But the only thing they have is pretty much unquestioned replacements. Which I'm sure they can do because of ridiculous markup.
BTW, it might not be your fault at all, because these are rigid glass pieces, they have to be flat in order to stick to the phone. a SLIGHT imperfection will cause it to not stick.
All that being said, I went with MIME glass protector.
I have the glas t and I love it. They are much easier to apply then typical plastic ones as they dont bend and flop around when applying. When I applied mine it lined up perfectly but I did get lint under it right in the middle of the damn screen. I tried dealing with it but couldn't take it so I lifted it half way up with my finger nail and used scotch tape to get the lint off... dropped it back down and it looked even worse. I thought i wasted 27 bucks until the morning when I looked at my screen and bubbles were gone. So it is possible to remove lint just dont touch the adhesive.
Sent from my SPH-L720 using xda premium
just pay the half price spigen charges to replace it and move on. sulk it up as paying for a learning experience.
they already mention that the best method for aligning the thing is to use scotch tape on the top and bottom aligning it then drop down.
if you dont want any dust trapped, well don't mind me for stating the obvious but... don't work in a dusty room, close windows/doors turn off fans... don't breathe too hard on it lol.
use a photo air duster like a Rocket blower, to remove any left over dust/lint from cleaning the screen. I find that camera lens solution and lens paper works perfectly for prepping the surface. use the included stickers to remove any left over dust that cannot be blown away by the rocket blower.
if you can do not reapply once completely set down, when applying make sure it's aligned, bottom edges, make sure the gaps are evenly distributed on all sides, cutout holes centered...
when applying and you notice it is not centered gently lift up but never touch the adhesive side. lift up with only scotch tape.
I've been applying screen protectors for years and have gotten it down to a science... everyone comes to me to get theirs installed haha...
Once any part of this is adhered scotch tape is useless as it's glass. you have to use a suction cup or your finger nail you just have to be careful.
I install mine in the bathroom with the shower on hot. Let the steam take care of all the dust particles. I have been doing it this way for a awhile now and i never get dust under the screen.
Sent from my SCH-I545 using Tapatalk 4 Beta
i installed mines 5 days ago and got a 2mm air bubble on the right side of the home button i couldn't squeegee it out and doesn't seem to want to go away. has anyone else experienced this? is there anything i can do to get rid of it or will it eventually go away on its own? fortunately its not on the actual screen but its still an eyesore
i re applied my twice, wif no side effect, just dun touch the adhesive side, use industrial musking tape to lift it and for dust on under the screen, use scotch tape to remove it. key point is to never touch e adhesive side wif ur finger. nothing wrong wif this product, love it! its like the original screen, just tat if u really scratch it, u can remove it and there is the perfect screen below it.
btw for those tat claim it could b an production defects tat the glass is not perfectly straight, being in the glass industry for over 30 yrs, its actually easier and cheaper to create prefectly straight glass then any wif the slightest curve.
Sent from my GT-I9500 using xda premium
blackguy101 said:
So I just got this screen protector today and it does look amazing ill admit. The problem is it does not seem like the top part of the protector wants to attach to the phone as if there is no adhesive. This is mostly my fault ill admit. I put it on wrong and what i did was take the bottom of nail and peeled it up and tried to re apply to adjust it. Is there any way I can maybe re ad the adhesive and how can I safely get off any lint or w/e that may have gotten onto the bottom of the screen protector? I already opened a ticket to spigen but I heard that their customer service is crap so I just wanted to see if there was anything I could do in the mean time.
Click to expand...
Click to collapse
Same thing happened to me so I had to return it. The install came out perfect but the top left did not want to seal/adhere properly. I was so disappointed so I just went with the tried and true zagg. I purchased the protector from eBay so the return policy is different from their website.
Sent from my SAMSUNG-SGH-I337 using Tapatalk 2
just tried lifting up that part of the screen for a few seconds and putting it back down. this air bubble is like a giant zit that wont go away
blackguy101 said:
I already opened a ticket to spigen but I heard that their customer service is crap so I just wanted to see if there was anything I could do in the mean time.
Click to expand...
Click to collapse
This is why I chose MIME. Email response is lightning quick and they include a hand written note in the package. Would definitely send you a new one without a question
Sent from my SGH-M919 using Tapatalk 2
The issue with it not laying after picking it up with your fingernail is not necessarily because the adhesive has gone bad. You need to level out the edge you stuck your nail under. Happened to me, fixed it with the squeege between the phone glass and the protector, prying up to level out the edge.
drbveb88 said:
I install mine in the bathroom with the shower on hot. Let the steam take care of all the dust particles. I have been doing it this way for a awhile now and i never get dust under the screen.
Sent from my SCH-I545 using Tapatalk 4 Beta
Click to expand...
Click to collapse
So installed my tr, first try no bubbles.Seriously looks and feels like the samsung glass. AMAZING!!!
The steam trick works. Its not like its a sauna and your phone is a steamy. The steam is like a static electricity to dust.
Sent from my SCH-I535 using xda premium
Hey everybody, got a new case review. This one is the infamous Nillkin Fresh, which is Nillkin's second generation of flip covers. To be honest, I got this case because it works with the iloome ScreenMate tempered glass protector I got, which didn't work with any of my other cases.
I got the yellow color, and it looks very nice. The flip has a darker yellow than the snap on part, which looks perfectly fine to me. The flip doesn't stay down for the first few days, and it doesn't have a lock mechanism. But, with a few days use, the flap does stay down on itself. Now, at first it wasn't working with my tempered glass protector, so I just kept stretching the fake leather out, and eventually it stays. I just clamped it so it stayed stretched. This is a very simple case, and if you don't drop your phone a lot (like me) this is a really nice case, it has a soft lining on the inside of the flip, almost like micro-fiber, and it helps keep fingerprints away. I do like this case, but it's not perfect. You can also use it as a stand, just fold it back and slide it into the slot. I absolutely HATE this feature, as the slot sticks out from the back of the case, so I can't use it with the Orb Charger. I forgot to take pictures of it, but it is REALLY annoying. Overall, aside from that one thing, it's a really nice case. :laugh:
Just to add on to OP, mine's the light blue one, a really sweet colour.
Has a microfiber (or whatever you call that) lining, prevents the screen from getting scratched.
The thickness. When paired with apps like Proximity AutoLock. you simply flip the cover and BAM, the phone locks itself. (Disclaimer: The app takes up quite a lot of battery though.)
Thickness again.
Thickness compared to a bumper. (if you haven't realized yet, I like blue )
The back plastic has got this pearly, glittery effect, too subtle to notice unless you're staring at it.
The front is a leathery kind of texture. Not real leather, of course.
It does destroy the edge swiping experience, with the exception the left hand side center (shown in the pic). May cause full screen SPs to bubble up too, but I have no idea, I don't use full screen ones.
How it looks. Mine has yet to become seasoned, so it'll topple if I don't support it. It has a hook that'll hook the front cover.
The headphone jack.
Those with a dbrand skin might want to take note, it kinda leaves a mark on the skin, but if you don't use the case for long enough, the mark'll go away.
I'd recommend it 8/10 overall as it makes it hard to use the phone using your left hand with the front flap, also, it makes my phone feel like a tank. But the front protection is great if you're not using a screen protector. But be careful of oil stains, they're almost impossible to remove from the inner lining. Washed it once, dried it and it feels like new again.
Edit, does anybody know how the hell do I resize the pictures? They're HUGE.
jiayit said:
Just to add on to OP, mine's the light blue one, a really sweet colour.
Has a microfiber (or whatever you call that) lining, prevents the screen from getting scratched.
The thickness. When paired with apps like Proximity AutoLock. you simply flip the cover and BAM, the phone locks itself. (Disclaimer: The app takes up quite a lot of battery though.)
Thickness again.
Thickness compared to a bumper. (if you haven't realized yet, I like blue )
The back plastic has got this pearly, glittery effect, too subtle to notice unless you're staring at it.
The front is a leathery kind of texture. Not real leather, of course.
It does destroy the edge swiping experience, with the exception the left hand side center (shown in the pic). May cause full screen SPs to bubble up too, but I have no idea, I don't use full screen ones.
How it looks. Mine has yet to become seasoned, so it'll topple if I don't support it. It has a hook that'll hook the front cover.
The headphone jack.
Those with a dbrand skin might want to take note, it kinda leaves a mark on the skin, but if you don't use the case for long enough, the mark'll go away.
I'd recommend it 8/10 overall as it makes it hard to use the phone using your left hand with the front flap, also, it makes my phone feel like a tank. But the front protection is great if you're not using a screen protector. But be careful of oil stains, they're almost impossible to remove from the inner lining. Washed it once, dried it and it feels like new again.
Edit, does anybody know how the hell do I resize the pictures? They're HUGE.
Click to expand...
Click to collapse
You could just use a photo editor and re-crop?
Sent from my Nexus 4, the only phone approved by Patrick Star
N4ever said:
You could just use a photo editor and re-crop?
Sent by a giant douche
Click to expand...
Click to collapse
While we're doling out advice, I recommend that you change the text you quote so everyone doesn't have a second column of gigantic images...
N4ever said:
You could just use a photo editor and re-crop?
Sent from my Nexus 4, the only phone approved by Patrick Star
Click to expand...
Click to collapse
You could have said that without quoting the images all over again....
I have this case too, just never got around to finish writing my review. Mine is mint green (though some product pictures may appear turquoise).
Having a front cover in addition to the case is definitely nice, as I can drop it into my bag without worrying about what is going to hit against the front screen. Also very handy when talking on the phone with the flap covering the screen.
It's not slim as a ringke slim but not thick either, and the phone looks nice in it. I liked that it didn't have an actual lock to keep the cover on because it was easier to flip open.
It's so annoying when your holding it open. No comfortable way to do it.
Sent from my Nexus 4, the only phone approved by Patrick Star
Are the buttons easy to press?
Sent from my Nexus 4 using Tapatalk 4 Beta
Tbh it's quite hard. And trying to take a screenshot with both buttons is a nightmare. But I don't take that many screenshots anyway and the power button is not really that hard to press, it's just that their opening hole for the power button is a tad too small.
jiayit said:
Tbh it's quite hard. And trying to take a screenshot with both buttons is a nightmare. But I don't take that many screenshots anyway and the power button is not really that hard to press, it's just that their opening hole for the power button is a tad too small.
Click to expand...
Click to collapse
I can see the volume rocker is exposed when you open the case. The power button looks a bit hard. In my current case(looks like the ringke slim) i had to cut off the bar at the top to gain easy access to power button.
Sent from my Nexus 4 using Tapatalk 4 Beta
The way everything folds is just uncomfortable.
Sent from my Nexus 4, the only phone approved by Patrick Star
I got this case last week, black one. The plastic base is super cheap, there are at least two defects and the frame around the power button is simply bent. Although my flip cover actually rests perfectly on the screen, the plastic part makes noises everytime a little pressure is applied to the sides.
Went straight to the litter bin, I'd rather use my phone naked than inside this thing.
Just my two cents.
Fabriciohss said:
I got this case last week, black one. The plastic base is super cheap, there are at least two defects and the frame around the power button is simply bent. Although my flip cover actually rests perfectly on the screen, the plastic part makes noises everytime a little pressure is applied to the sides.
Went straight to the litter bin, I'd rather use my phone naked than inside this thing.
Just my two cents.
Click to expand...
Click to collapse
Seems like you got a manufacturing defect.. Why didn't you ask for a refund?
Hung0702 said:
While we're doling out advice, I recommend that you change the text you quote so everyone doesn't have a second column of gigantic images...
Click to expand...
Click to collapse
Sent by a bigger douche who calls people out
Sent by an even bigger douche
Sent from my Nexus 4, the only phone approved by Patrick Star
I recently purchased a tempered glass screen protector for my nexus 5. From using it so far I love most everything about it. It feels just like the screen without a screen protector and does not smudge is easily as the other screen protectors I would use. Since I'm used to paying a lot less for screen protectors I took a lot of time to apply the screen protector. I took about 30 minutes, but it was worth it since I applied it perfectly. Not a piece of dust, so straight it looks like the screen itself. However as soon as I applied it I was disappointed to see these weird patterns under the screen. I said spider webs because that is the best term I can think of to describe them. It almost looks like little circles of fiber are under the screen. The biggest one has a little rainbow circle in the middle surrounded by what looks like a spider web. Any help would be appreciated.
Sent from my Nexus 7 using xda app-developers app
It's moisture - did you apply it in a wet environment? I applied mine in a bathroom after running a hot shower (to settle the dust) and ended up with something that looks exactly like this.
Bump. I just need to know if it is a faulty screen protector so I can return it
Sent from my Nexus 7 using xda app-developers app
Its a known issue with the N5. Almost everyone has the spider web with the tampered glass, especially by the mic. You might be able to get rid of it by using binder clips or some sort of clips and leave it over night.
I was in a bathroom since it has the least dust but it was dry at the time. I did wipe it down with 70% isopropyl rubbing alcohol. I didn't notice any left at the time and I figure it would have all evaporated quickly anyways. What did you end up doing with yours?
Sent from my Nexus 7 using xda app-developers app
I heard about the binder clip thing, but I'm way too protective of my phone and would honestly just rather buy another screen protector.I wasn't aware the problem is common in the n5. Thanks for the input!
Sent from my Nexus 7 using xda app-developers app
Don't buy the same screen protector. You'll get the same result. Mine also have that little dimple on the bottom right portion on my phone. If you must, get the iloom flex glass or similar kind. It goes on your screen without air bubble trapped unlike the non bendable glass protector. Hope this helps.
Sent from my Nexus 5 using xda app-developers app
you can try massaging them just like getting rid of bubbles from a plastic screen protector. applying pressure using your fingers.
if you don't want to use binders, you can use clothespin with a cloth in between to apply pressure.
I initially had them but after doing the above I got rid of it and it never came back.
It could well be a faulty screen protector. Which brand did you buy? I had an identical problem with my spigen tempered glass screen protector. Luckily they were happy to replace/refund it as it was known to have come from the original, faulty batch they initially released around the release date of the nexus 5.
Domster26 said:
Bump. I just need to know if it is a faulty screen protector so I can return it
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Domster26 said:
I recently purchased a tempered glass screen protector for my nexus 5. From using it so far I love most everything about it. It feels just like the screen without a screen protector and does not smudge is easily as the other screen protectors I would use. Since I'm used to paying a lot less for screen protectors I took a lot of time to apply the screen protector. I took about 30 minutes, but it was worth it since I applied it perfectly. Not a piece of dust, so straight it looks like the screen itself. However as soon as I applied it I was disappointed to see these weird patterns under the screen. I said spider webs because that is the best term I can think of to describe them. It almost looks like little circles of fiber are under the screen. The biggest one has a little rainbow circle in the middle surrounded by what looks like a spider web. Any help would be appreciated.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Its not faulty, I'm very OCD myself, and I had the same thing with a tempered glass screen protector from Anker.
It took about a week of gentle massaging, and rubbing, but it comes out. You just need to keep rubbing it...
DO NOT SAY THATS WHAT SHE SAID
But seriously... thats all
may need the "glue" to take care of it...
use a hair drier and get it warm... then use pressure and come clothe clips... i think a binder clip is too strong
see what happens
I used a small adjustable wrench with cloth covering the back of phone and the glass. With it you decide how firm its clamped.
20 minutes and the big bubble to the right of the led was gone. Never to return. ?
Sent from my N5, N7, Moto X, G Tab 3 or S2.....
An update to provide info to those in the future. Not wanting to try anything with my phone until trying out a new one, I contacted the person who sold it to me. The eBay seller kindly sent me a new one, so as soon as I got it, I applied it. I was even more careful, and was frustrated every time it was half a millimeter off. Once again, I applied it perfectly. I put my finger on the center of it, and watched it slowly stick. My heart dropped when it revealed the bubbles, in the identical spots as they were in before. Not to mention the biggest one seems bigger and there is a slight patterned line in the middle. I haven't decided yet. I might try the methods everyone provided (Thanks!), or I will get myself a nice spigen one. I think it might have been because it was some cheap protector. The pictures are below.
Sent from my Nexus 7 using xda app-developers app
I used binder clips but I used a thick microfiber cloth before I put the binder clip on and it worked 100%. I had a small area near the camera at the top and placed a MF cloth over it and used the end of a ball point pen (Not the tip) and put pressure on it and it disappeared. It's now been 1 month and its still flawless.
If you don't clamp and leave it clamped for 20 minutes or so on those bubbles, they will likely appear on any glass protector. Its a widely know n5 screen issue.
A binder clip....or a medium adjustable wrench work great. Careful not to over tighten and break the glass tho. And use padding....cloth.
Some guys here keep returning them, thinking they are all defective adhesive in the exact same spots. Lol. Especially the well known big spot to the right of the led.
Sent from my N5, N7, Moto X, G Tab 3 or S2.....
---------- Post added at 09:19 AM ---------- Previous post was at 09:18 AM ----------
I'll add, my mime ghost had the same bubbles as the pics above. 20 minutes of the wrench in each spot....they were all gone for good. 2 months now and the glass is still flawless and bubble free.
Sent from my N5, N7, Moto X, G Tab 3 or S2.....
kj2112 said:
If you don't clamp and leave it clamped for 20 minutes or so on those bubbles, they will likely appear on any glass protector. Its a widely know n5 screen issue.
A binder clip....or a medium adjustable wrench work great. Careful not to over tighten and break the glass tho. And use padding....cloth.
Some guys here keep returning them, thinking they are all defective adhesive in the exact same spots. Lol. Especially the well known big spot to the right of the led.
Sent from my N5, N7, Moto X, G Tab 3 or S2.....
---------- Post added at 09:19 AM ---------- Previous post was at 09:18 AM ----------
I'll add, my mime ghost had the same bubbles as the pics above. 20 minutes of the wrench in each spot....they were all gone for good. 2 months now and the glass is still flawless and bubble free.
Sent from my N5, N7, Moto X, G Tab 3 or S2.....
Click to expand...
Click to collapse
Thanks to everyone for the help! I thought it was my screen protector. Now I just have to bring myself to put a binder clip on my phone.
Sent from my Nexus 7 using xda app-developers app
Domster26 said:
Thanks to everyone for the help! I thought it was my screen protector. Now I just have to bring myself to put a binder clip on my phone.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I had the same issue like you. You have to take the back cover off and unscrew the bolt that is under to bubble. The screen is fitted with 4 bolts at the bottom. It is too tightened.
bioan said:
I had the same issue like you. You have to take the back cover off and unscrew the bolt that is under to bubble. The screen is fitted with 4 bolts at the bottom. It is too tightened.
Click to expand...
Click to collapse
I probably wouldn't want to try it until I had tried the binder clip, but doesn't taking off the back cover void your warranty?
Sent from my Nexus 7 using xda app-developers app
Thread cleaned, and honestly, I don't know why (or how for that matter) it turned into a racial discussion.
But in the better interest, let's try and not be so sensitive in the future.
No harm, no foul.
But if anybody says "cheap Russian cars"... I will agree with you 100% :laugh::laugh::laugh:
Carry on with... what was it? Oh yeah, screen protectors.
MD
Domster26 said:
I probably wouldn't want to try it until I had tried the binder clip, but doesn't taking off the back cover void your warranty?
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
No. You can easily take it off with a plastic card. It's fitted with clips.
With the S6 Edge, the clear view cover scratched many screen. Is this the same with the S6 edge+?
Sent from my SM-T815 using Tapatalk
Not really
Hello there
I've been using Clear View cover for about a month or so, and so farl not getting any signs of scratching the screen, however the case itself suffered more than a few scratches which is a pretty good fail since this case isn't really cheap. So answer is no, I'll be watching to see if it does.
Cheers
crash090 said:
Hello there
I've been using Clear View cover for about a month or so, and so farl not getting any signs of scratching the screen, however the case itself suffered more than a few scratches which is a pretty good fail since this case isn't really cheap. So answer is no, I'll be watching to see if it does.
Cheers
Click to expand...
Click to collapse
Maybe the case needs a screen protector. Hahaha!!!
boogiecornejo said:
Maybe the case needs a screen protector. Hahaha!!!
Click to expand...
Click to collapse
Yes Sir, Exactly, a 50$ case needs a case protector...
Clear View Case
crash090 said:
Hello there
I've been using Clear View cover for about a month or so, and so farl not getting any signs of scratching the screen, however the case itself suffered more than a few scratches which is a pretty good fail since this case isn't really cheap. So answer is no, I'll be watching to see if it does.
Cheers
Click to expand...
Click to collapse
Hi,
Using the clear view case for about a month now. Not a single scratch on the screen or the case.
Don't know about the clear case, but the s view cover is scratching the screen slightly. Had this issue with the official s view cover by samsung. Switched over to Rearth Fusion one.
No issues for me, have been using the S-View case for a few months now.
.
Sent from my Samsung Galaxy S6 Edge+ using Tapatalk
Does anyone know HOW it is scratching the screen? Is it a design flaw?
Sent from my SM-G928F using Tapatalk
poplectic said:
Does anyone know HOW it is scratching the screen? Is it a design flaw?
Sent from my SM-G928F using Tapatalk
Click to expand...
Click to collapse
All I know is it put scratch all over the curve on my display, got the screen replaced free of charge now using a Spigen Case.
Not a scratch on my screen...had Clearview case since day 1
poplectic said:
Does anyone know HOW it is scratching the screen? Is it a design flaw?
Did you ever play with a balloon as a kid, rub it real fast, back and forth a bunch of times against your shirt or the carpet and then held it up on top of your head? If you did you'd notice that your hair suddenly is attracted to that balloon, as if it's a magnet. It's because rubbing it against your shirt or the carpet created static electricity and now your balloon full of negative charge. If you run it against anything with a positive charge it'll attract it, like a magnet.
Same idea with the cover, except that the balloon is the cover. The materials it's made of after awhile of opening and closing it begins to create a field of static charge, similar to the balloon and it starts to attract dust, sand, dirt, the tiny little particles inside your pockets or purse. Now all that crap on there built itself up along the inside of the cover and since your phones in your pocket, as you're walking around, its shuffling inside your pocket there...
And guess what happens when there's debris stuck inside that cover as you're just going about your day...?
Give up....?
You get scratches on your screen!
A speck of sand is tiny, most don't even realise it's there, yet it can cause some damage on a screen.
Basically the materials Samsung used to make that cover is rubber like, which is prone to building up static, so an expensive screen, tiny dirt particles and static prone materials are not a good mix.
Ways to avoid this?
1. Wash your jeans more often
2. Always have a clean/dirt or particle free purse
3. Avoid using the cover unless Samsung remakes it with static free materials.
I wonder if throwing a dryer sheet in your pocket works to eliminate static build up?
Hmm... well, if anything your phone and anything else down there should smell fresh and clean.
The cover looks really cool but not cool enough for me to risk my screen.
I'd feel pretty stupid to spend $60, with the intention to protect my phone with something that actually increases the potential to damage it.
Heard Samsung is aware of this and replaced screens free because of it, so maybe they reformulated the materials in it? Can't imagine they'd continue selling it, knowing they'd have to fix every screen that bought the cover. The cost to replace a screen is likely more than profit for the case, I'd think...?
Click to expand...
Click to collapse
Talysdaddy said:
poplectic said:
Does anyone know HOW it is scratching the screen? Is it a design flaw?
Did you ever play with a balloon as a kid, rub it real fast, back and forth a bunch of times against your shirt or the carpet and then held it up on top of your head? If you did you'd notice that your hair suddenly is attracted to that balloon, as if it's a magnet. It's because rubbing it against your shirt or the carpet created static electricity and now your balloon full of negative charge. If you run it against anything with a positive charge it'll attract it, like a magnet.
Same idea with the cover, except that the balloon is the cover. The materials it's made of after awhile of opening and closing it begins to create a field of static charge, similar to the balloon and it starts to attract dust, sand, dirt, the tiny little particles inside your pockets or purse. Now all that crap on there built itself up along the inside of the cover and since your phones in your pocket, as you're walking around, its shuffling inside your pocket there...
And guess what happens when there's debris stuck inside that cover as you're just going about your day...?
Give up....?
You get scratches on your screen!
A speck of sand is tiny, most don't even realise it's there, yet it can cause some damage on a screen.
Basically the materials Samsung used to make that cover is rubber like, which is prone to building up static, so an expensive screen, tiny dirt particles and static prone materials are not a good mix.
Ways to avoid this?
1. Wash your jeans more often
2. Always have a clean/dirt or particle free purse
3. Avoid using the cover unless Samsung remakes it with static free materials.
I wonder if throwing a dryer sheet in your pocket works to eliminate static build up?
Hmm... well, if anything your phone and anything else down there should smell fresh and clean.
The cover looks really cool but not cool enough for me to risk my screen.
I'd feel pretty stupid to spend $60, with the intention to protect my phone with something that actually increases the potential to damage it.
Heard Samsung is aware of this and replaced screens free because of it, so maybe they reformulated the materials in it? Can't imagine they'd continue selling it, knowing they'd have to fix every screen that bought the cover. The cost to replace a screen is likely more than profit for the case, I'd think...?
Click to expand...
Click to collapse
Wow yeah. That kind of material would be a magnet!
Sent from my SM-G928F using Tapatalk
Click to expand...
Click to collapse
According to three local shops here in NL Samsung did a massive recall of the first series Clear View Covers and replaced them with a revised version that apparently solved the scratching.. The version I bought today definitely looks different from the first generation I had on my normal S6
Sent from my SM-G928F using Tapatalk