Hello all -
New to Android platform. Hope someone from this great forum can assist ... I'll try to be brief. First, my device:
Razr HD LTE xt925
FIDO
Android v.4.1.2
Had attempted a little while ago to unroot my phone, as I was curious about better customization options. For various reasons, I tried to 're-root' and go back to factory. Did that, upgraded from ICS Jellybean 4.1.2 (which is what my phone was on when purchased).
Now, when I boot the phone, I still get the message 'Bootloader is unlocked'. After upgrading from ICS to Jellybean, I saw a large number of Verizon specific apps. When booting the phone, instead of the Motorolla 'M' icon/splash, I get a 'Droid' icon, with sound-effects. Also, System Version shows as 9.16.XT926.Verizone.en.US (even though my phone is an XT925 on FIDO). I obviously fudged something up... !
Most importantly, ever since, my GPS is very spotty, and I cannot get on the FIDO LTE network. In Mobile Networks setting, I have to always have 'Global' selected as network. If I choose LTE/CDMA or GSM/UMTS, it can never find an available network.
I'm really just trying to get my phone back to the state is was when I purchased it.
Any ideas would be GREATLY appreciated!
Canlin said:
Hello all -
New to Android platform. Hope someone from this great forum can assist ... I'll try to be brief. First, my device:
Razr HD LTE xt925
FIDO
Android v.4.1.2
Had attempted a little while ago to unroot my phone, as I was curious about better customization options. For various reasons, I tried to 're-root' and go back to factory. Did that, upgraded from ICS Jellybean 4.1.2 (which is what my phone was on when purchased).
Now, when I boot the phone, I still get the message 'Bootloader is unlocked'. After upgrading from ICS to Jellybean, I saw a large number of Verizon specific apps. When booting the phone, instead of the Motorolla 'M' icon/splash, I get a 'Droid' icon, with sound-effects. Also, System Version shows as 9.16.XT926.Verizone.en.US (even though my phone is an XT925 on FIDO). I obviously fudged something up... !
Most importantly, ever since, my GPS is very spotty, and I cannot get on the FIDO LTE network. In Mobile Networks setting, I have to always have 'Global' selected as network. If I choose LTE/CDMA or GSM/UMTS, it can never find an available network.
I'm really just trying to get my phone back to the state is was when I purchased it.
Any ideas would be GREATLY appreciated!
Click to expand...
Click to collapse
Here's the JB file for Fido/Rogers:
http://sbf.droid-developers.org/van...12.2_CANADA_VANQJBLTEFRCI_P004_CFC_fb.xml.zip
Thanks very much for your reply. I did try flashing with the FIDO file you quoted, and my phone didn't take it. I booted to fastboot, current drivers, and the RSD Lite message I got was:
Failed flashing process. 1/21 flash partition "partition_signed" -> Phone returned FAIL
The corresponding message on my phone was: Failed flashing process. 1/21 flash partition "partition_signed" -> Phone returned FAIL
Hope someone has an idea on how to successfully get back to the FIDO Android v.4.1.2.
Thank you all!
Have you removed the Getvar lines? You can also try the Telcel rom with Fido modem/fsg files placed into it. (That's what I had before custom roms because Fido was slow with JB).
Yes, I did try when removing getvar line in the xml.
I stated erroneously the error on my phone after trying the intitial FIDO flash - the phone error in fact was:
downgraded security version
update gpt_main version failed
preflash validation failed for GPT
I appreciate the input. Any other thoughts on this? I regret trying to unroot the damned thing in the first place... !
Canlin said:
Yes, I did try when removing getvar line in the xml.
I stated erroneously the error on my phone after trying the intitial FIDO flash - the phone error in fact was:
downgraded security version
update gpt_main version failed
preflash validation failed for GPT
I appreciate the input. Any other thoughts on this? I regret trying to unroot the damned thing in the first place... !
Click to expand...
Click to collapse
From what I can see, those errors come when trying to downgrade to ICS through RSD but you are trying to install JB so that makes no sense. Since you are bootloader unlocked you can probably flash the files through fastboot?
no worries man...calm down...you'll be fine...i had the same issue..i'm actually using an xt925 as well; had the same issue a couple of days back...see the issue is the ROMs that you see for xt925/926 is actually the ROM for verizon, so when you flashed a custom ROM, it actually flashed your GSM radio to the version radio, which is CDMA; These are the steps you need to follow, and you're good to go, trust me:
1). After deleting the getvar line, delete 2 lines below it as well, so lines 12 and 13, then try flashing with this new xml file. really imp, this will take about 5-10 mins, then the phone will reboot, dont unplug the cable yet, it's gonna reboot, and ask to sync phone with SIM, do that....and you're good to go.
2). Root.
3). Install TWRP, preferably 2.5, then backup your stockROM.
4). I would recommend using Matt's utility for xt926, and you can perform all the steps in sequence.
note: Since you unlocked your bootloader, you will always get that warning message, it's normal.
lemme know if it works!
eomahos I am in your debt. Worked like a charm!
In step 4 you indicated using 'Matt's utility for xt926' ... I'm not familiar with the utility. Do I use this to install TWRP?
Thanks again man!
Related
Good Afternoon everyone
I'm of average knowledge and have had an issue that im hoping you kind people can assist with. I will happily add more details if necessary but I'll try and keep it simple and clear for now for my current sitation and what I'm looking to do.
I've been happily using AOKP on my XT925 for a few months now and updating it every now and again. After an infinite bootloop issue last night, I was kind of buggered but after toing and froing I got into Fastboot. After not much and desperate to attempt was working I used Mr Parkinsons 2.0 tool, and with it listing flashing to stock XT925 / XT926 as its option 1, I clicked that. Successfully it flashed it with the package it uses and booted fine. I have functionality, on the phone settings strangely its now listing as XT926 but again it works HOWEVER unbeknowst (probably stupidly) to me its a VZW American default and naturally won't recognise my SIM and I can't make calls.
I'm currently trying to flash it again through Fastboot with RSD Lite 6.15 to a Stock Xt925 Firmware, ones I acquired through the thread in the XDA Dev. I'm based in the UK and my SIM / Network provider is O2. The nearest fit Firmware wise seems to be the Orange UK package or the Vodafone France ones.
The Orange UK package won't decompress in RSD as it's saying 'the filename may be too long'. The Vodafone France one will decompress - however originally it said 'unknown flashboot command - flash failed' (getvar). Having done some reading I deleted the sole line 'Getvar' string in the XML through notepad, saved it and tried again. This time is said something along the lines of 'Flash failed 2/22 - phone returned'. I've tried Googling this error and all the forums that mention it seem to be in Spanish or French.
I'm tired and it's been a long day for family issues - however I could do with having my phone back on an even keel. Please can someone help or at least point me in the right direction? I'd be very VERY grateful for any dialogue.
SHORT VERSION OF PROBLEM: Currently running the Stock Recovery Package included in Mr Parkinsons 2.0 utility. Phone is functional bar not recognising my SIM and Im in the UK on O2 and it's US centric. Concerned that in phone settings it says XT926. Recovery and fastboot options available. RSD Lite is returning primarily saying 'flash failed 2/22'
Are there any other utilities to recommend that would get me where I want to be other than RSD?
Please go easy on me! If I've not explained myself very well then and someone may know the answer then I'm happy to be more descriptive in terms of details
Additional details:
- On startup its saying 'SIM is from unrecognised source
- My current system version is 9.16.6.XT926.Verizon.en.US / Baseband: VANQUISH_BP_100730.081.64.09P
After some playing I resolved this.
In terms of anyone who should be faced with this issue, the answer lies in deleting more of the .xml file in your zip that your flashing via RSD
I browse this forum every now and again so reply if you need assitance and need me to be more specific, otherwise mods can lock this as closed.
Hi, i have the xt926, was working fine, but i did a test using *#*4636#*#* , i selected usa band ,said successful, then selected again cellular, said unsuccessful, lost gsm connectivity, now no work for gsm!!!! Reset the phone reset the sim, factory reset, etc nothing worked!!!
Any ideas? I am heading towards flashing again the rom!
update:
phone was just rooted, no unlocked bootloader ever, running latest firmware and was just debloated.
Any ideas how to install again all the firmware? I tried rsd lite but failed, the latest whole version i found , was saying in fastboot fail due to downgrade.
I will try now DroidHD Utility 2.0 Lite to see if i can do anything
I think i should make a new post, used DroidHD Utility 2.0 Lite and i am back on gsm!Just lost 2 hours of my life but gained back thanks to this tool!Donation time!
I am having issues with my phone not registering on local China Unicom network. First I updated my firmware to Android 4.3 UK version and I think this is what messed up my modem. I downgraded back to 4.1.2 and lost my IMEI. I then fixed my phone for $50 but I don't know how exactly the guy did. I upgraded again to 4.3 and lost my network again. I do not want to pay $50 again. This time I made a backup of my efs and restored my IMEI but I still cannot get to register on network. I have tried so many solutions but none seem to work. Just to avoid repetition I have updated my modem, installed modem files recovery ([DDEMG2 and XXDME4]), tried other custom ROMS and official firmwares but I keep getting the same error. I dont know how this Chinese guy fixed my phone but he rooted it and when I inserted the sim card it asked for network unlock code. I am writing this as it might be that my phone is set to locked version. I have also realized this has caused an issue with my cwm recovery which says E: signature verification failed. i am able to fix this by re-installing version 6.0.4.3 which then automatically updates or downgrades(I don't know) and brings back the signature error. I have my IMEI, anyone please help me with this.
Hello,
For the better part of this evening I have been trying to flash Telus Moto G with a different ROM. I even unlocked the bootloader, but to no avail.
I keep getting the following errors when trying to flash bootloader, recovery and system:
hab check failed for boot
hab check failed for recovery
invalid PIV signed system image
(when trying to flash a ROM with three sparsechunks, sparsechunk.0 gives the error, two remaining flash correctly, the phone boots, but the phone is unusable (most of the menus and stuff is just not there)
I have tried GPE, same thing (wouldn't even boot).
Only thing that always works is flashing Telus firmware.
Is there ANY way to bypass this limitation?
Please help me!
same for me bro. I tried US retail and it didnt work. I didnt unlock bootloader so I went back to the telus one.
I dont get why you cant get it in if you unlock bootloader
anyways, I doubt there is a difference between these stock rooms. just saying..
There is a fundamental difference in that Telus version only has a few system languages, and doesn't have the ones I need.
could you root it, install cwm and than install custom rom?
Yes, I've finally managed to flash CWM and Cyanogenmod. Thanks for the tips!
Flintberg said:
Yes, I've finally managed to flash CWM and Cyanogenmod. Thanks for the tips!
Click to expand...
Click to collapse
Sweet! Good to hear.
Anyone found a way to install non-Telus stock FW or GPE on a Telus Moto G in the meantime? It appears Moto G losdt CM support, so I would like to get back to stock - but Telus version is not acceptable.
Flintberg said:
Anyone found a way to install non-Telus stock FW or GPE on a Telus Moto G in the meantime? It appears Moto G losdt CM support, so I would like to get back to stock - but Telus version is not acceptable.
Click to expand...
Click to collapse
I've tried flashing the US and GB retail with no success. The result of the effort was a loss of radio antenna with no network connection. Flashing the Telus firmware repaired the antenna issue with no errors when flashing all the files. The issue seems to be the bootloader and leaves me wondering if it needs to be unlocked. I'm not desperate to have a retail version that I'm willing to void the warranty by unlocking the bootloader.
Hello,
I am new to the forum and very much a noob. I had bought my SkyRocket in Miami nearly 2 years ago and it came unlocked (i believe the original carrier was AT&T since there was AT&T bloatware, even though there is no ATT logo on top of the screen, it has a Samsung one instead), however i never even had the original carrier's sim chip. It worked fine with two different SIM chips from different carriers until last saturday when I flashed a ROM update (updated to Jelly Bean 4.1.2 Stock) via Odin.
However, whenever i insert my SIM (which was previously working), instead of popping a box/window to request me a code, it forces me to reboot saying there is no valid SIM (print below).
edit: as a new user I cant post the print screen. it basically is a popup where the Title says: "SIM Card Removed", the content says: "The mobile Network will be unavailable until you restart with a valid SIM card inserted", below that there is a button called "Restart", which reboots my system. Whenever i boot my phone with SIM inside this message appearst and I cant close it, the only thing I can do is restart and remove the SIM if I intend to do anything on the phone.
Anyway, I would very much appreciate your help in trying to get that box requesting network unlock code to pop-up, does anybody know how to do it?
ps: service mode runs extremely slow and does not respond to most commands
pps: already tried typing different combinations of the *7465625*638*# codes and the phone does not respond to such commands (i.e., i insert the code but it doesn't display any alert or enter another screen, it just allows me to keep typing)
ppps: I'm also looking for an ICS stock rom to see if I can unlock it using an older firmware, but i can't find an an odin-flashable stock ics for download anywhere
pppps: I've already wiped cache and partition a few times, to no avail.
I know this is a long post, but I really appreciate and thank you in advance for your help.
need to be on stock to enter code, try jb stock
read the 1stop sticky(link in my sig) for all your needs todo so, theres even a free method to unlock sim if ur code fails
The problem started exactly when I flashed the update to Jelly Bean 4.1.2 Stock.
Willianstein said:
The problem started exactly when I flashed the update to Jelly Bean 4.1.2 Stock.
Click to expand...
Click to collapse
if u read the 1stop sticky, i know its long, u wouldve found a rogers ics for odin, a flashable stock att ics for recovery, and a free method to unlock sim.
what do u mean problems started after updating to jb, was it unlocked b4, if so updating shouldnt have reverted the unlock
edit: reread ur 1st post i think the problem is ur radio(jb radio) for the carrier u r trying to connect to, read the radio section in the 1 stop sticky
vincom said:
if u read the 1stop sticky, i know its long, u wouldve found a rogers ics for odin, a flashable stock att ics for recovery, and a free method to unlock sim.
what do u mean problems started after updating to jb, was it unlocked b4, if so updating shouldnt have reverted the unlock
edit: reread ur 1st post i think the problem is ur radio(jb radio) for the carrier u r trying to connect to, read the radio section in the 1 stop sticky
Click to expand...
Click to collapse
I updated to JB using one of the instructions I found on this forum ([HOWTO] NEWB GUIDES To | RESTORE TO STOCK | USE/T.S. ODIN | INSTALL TWRP/CWM | ROOT - thanks for the response here and the tutorial there, by the way). It was unlocked before, but I assume it had something to do with the previous firmware, because the sim unlock stopped working after I flashed JB through Odin.
ps: as I said I already bougght it unlocked and assumed it was from ATT given the bloatware, however my GF just pointed out the rogers logo on the back, therefore i think the hardware is from them instead. I'm downloading their rom and will reflash it and hope it works, i'll update the status here as soon as I make any progress
Hi, i just flashed a rogers rom and it worked. I'm sorry for the inconvenience. But wow, it runs much smoother than it did when running the wrong firmware. Idk why but whoever sold this to me had installed at&t firmware (it was always very glithcy, but i just assumed it was down to the hardware), i know that now because i see that rogers has a diferent intro than att app had either on gingerbread or jellybean.
Anyway, thanks for the help and - again - sorry for taking your time needlessly, i should've paid more attention to my own phone.
Moderator, feel free to close/move this thread