Database Info

Skinomi Screen Protector

Just got mine in the mail and applied it. Followed the instructions to the letter, and so far I still see streaks/residue behind the cover. The instructions say this will clear up within a few days so I won't pass judgement just yet. If the residue and streaks clear up like they say I would definitely recommend this. I will post back and update!
***Edit**
Forgot to add that as far as I can tell this cover has no effect at all on touch sensitivity.

You get the full skin or just the screen?

I just ordered mine using the get25 promo code to get 25% off. If it's anything like the Zagg skins the streaks will disappear.

hks18psigst said:
You get the full skin or just the screen?
Click to expand...
Click to collapse
Just got the screen. I didn't feel the rest was really necessary.

I ordered the full skin not in yet but planning on using that till a case I like hits the market I don't like any cases at the moment. .. but I was just wondering if the installation was tough with the full skin.. hope not...

hks18psigst said:
I ordered the full skin not in yet but planning on using that till a case I like hits the market I don't like any cases at the moment. .. but I was just wondering if the installation was tough with the full skin.. hope not...
Click to expand...
Click to collapse
The screen was somewhat straight forward and easy, the only complication I would see with installing it on the body is the corners not wanting to apply without some air bubbles.

Wish me luck. ... LOL hope it fits perfect with no bubbles imperfections piss me off

SystmDcln said:
Just got mine in the mail and applied it. Followed the instructions to the letter, and so far I still see streaks/residue behind the cover. The instructions say this will clear up within a few days so I won't pass judgement just yet. If the residue and streaks clear up like they say I would definitely recommend this. I will post back and update!
***Edit**
Forgot to add that as far as I can tell this cover has no effect at all on touch sensitivity.
Click to expand...
Click to collapse
Can you post a pic of the skin installed?

just ordered the screen only... good deal with that "get25" coupon code. Thanks guys!

just the screen protector shipped today.

Here are some pictures. I applied the product today.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Mine should be here by Friday. Great job how long did it take?

Probably about 30 minutes. I did the screen in the bathroom with high steam from the shower to keep the dust down, and then did the rest in my kitchen. I did use my wifes hairdryer to aid in drying the smaller pieces on the top, bottom and sides. you have to be careful when doing the H shaped part across the back and sides. You adjust the right and completely move the left by accident. I will let everyone know if the micro-bubbles dissipate as advertised and will take additional photos in a couple days.

My screen has cleared up a little bit in the past few hours. Hoping it clears all the way up.

Nicely done slimm13. The micro bubbles will go away if they are anything like Zagg's IS.

It looks did a really great job putting it on. Curious though that the edges aren't fully covered...it leaves those little 't' shaped spaces. The Zagg seems too fully covers the rounded edges...

Thank you guys for the kind words, I think it is far from perfect but serviceable. I was surprised about the corners as well, thought it was odd. I had hoped that there would have been some extra material and I would have cut pieces to fit in said holes.

hks18psigst said:
Wish me luck. ... LOL hope it fits perfect with no bubbles imperfections piss me off
Click to expand...
Click to collapse
hahahah you and me both. I also get pissed off at imperfections. Why don't you make a little YouTube video of how to apply it because I also ordered the full body skin and I don't want to mess it up. LOL and don't forget to post the link on here.

slimm13 said:
Here are some pictures. I applied the product today.
Click to expand...
Click to collapse
It looks good. Can't wait to getmine in the mail. But what's with all the dusty looking particles on the screen? Is that from the spray bottle?

archboy69 said:
It looks did a really great job putting it on. Curious though that the edges aren't fully covered...it leaves those little 't' shaped spaces. The Zagg seems too fully covers the rounded edges...
Click to expand...
Click to collapse
Those that cover the corners "well" are very easy to rub/peel off that corner as you just take it in and out of pocket. (I'd like to take a picture of my current phone to show you what I'm talking about.... it's ugly... but that gotta wait till my Nexus One arrives... ) Next time I'm getting these skins I'd look for the T-shaped ones with a hole at that pesky corner.

SGS Carbon Fiber case mod

Hi, Just decided to take some 3M Carbon Fiber tape and apply them on my SGS case... The result is pretty good in my opinion. Calling it Galaxy S Carbon now Here goes the pictures. Sorry for bad english.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have no camera here to take pictures closed on the device, so don't ask for it
EDIT: Some finished better light condition pictures

very cool bro

Very nice. Saw a friend do this with his iPhone 4. Guess not everyone likes the glass back, who knew.

Same thing I´ve done
Indeed, I did it a bit more precisely

Woah, I'm really impressed by both your efforts. I didn't even think of doing this, but now...... I think I might look into it. Any tips for anything that could save me trouble down the track?
And Vln_Thomas: Did you measure out a piece beforehand and then stick it on or did you stick it on and then cut?
EDIT: Although, now that I think about it, I don't even know where I'd get carbon fibre tape. Australia sucks like that.

Vln_Thomas said:
Same thing I´ve done
Indeed, I did it a bit more precisely
Click to expand...
Click to collapse
What did you do to make it so precisely? Appreciate

I´ve simply bought a 4*8 Inches sized Fibre tape.
Then i attached it on my backcover, heated the tape with a hair dryer and pulled it around the corners. When a part of the Cover was without folds, I let it cool down so that the tape cured and then cut a part of the fibre tape off.
Then I heated the cover again and the procedure started once more.
It took me for about 45 minutes and a very steady hand, even though a friend supported me.

That's awesome! Where did you buy the tape? I'm hoping that it was online...

Here : 3M™ DI-NOC™ CA-421 Carbon Folie
10*20cm are 4*8 Inches, enough for the Galaxy S
Greetings from Germany

Vln_Thomas said:
I´ve simply bought a 4*8 Inches sized Fibre tape.
Then i attached it on my backcover, heated the tape with a hair dryer and pulled it around the corners. When a part of the Cover was without folds, I let it cool down so that the tape cured and then cut a part of the fibre tape of.
Then I heated the cover again and the procedure started once more.
It took me for about 45 minutes and a very steady hand, even though a friend supported me.
Click to expand...
Click to collapse
Exactly the same here... My edges just didn't get perfect because i was afraid to break them... I was usign the hair drier and it looked like the back cover was going way too wobbly (i don't know the word opposit to "hard"). So pulled it as I could by the edges, wait to cool down and cut off the resting tape..

Nice mod man, and btw is that a tamiya tt-01e you have there in the background? haha

Adam01Rule said:
Nice mod man, and btw is that a tamiya tt-01e you have there in the background? haha
Click to expand...
Click to collapse
Haha yeah, tt01 ED actually

oh man, your sgs looks cool tho! thumbs up!

Very cool mod.
But just a warning, the backcover usually gets really hot when the phone is charging while running demanding apps. So you might want to be careful doing that in case it is not releasing its heat buildups as easy anymore. Would be sad to have it overheat after making it look so awesome.

kblood said:
Very cool mod.
But just a warning, the backcover usually gets really hot when the phone is charging while running demanding apps. So you might want to be careful doing that in case it is not releasing its heat buildups as easy anymore. Would be sad to have it overheat after making it look so awesome.
Click to expand...
Click to collapse
Thank you for the warning but i don't think it can get any hotter.. i was already using a tpu full back cover, some extra tape will not kill it

No problem at all with overheating....
Same temperatures as before

Vln_Thomas said:
No problem at all with overheating....
Same temperatures as before
Click to expand...
Click to collapse
I guess so, I just thought it might become a problem if getting rid of all that heat got harder. Mainly because the original gets very hot, and the phone once came up with a warning on mine about not charging the phone while using it so much, I think I was using it to watch a full HD video or something, that I had not bothered to convert to something more fitting to the SGS. But it is nice to use it as a portable media centre.

What a great idea!! Here's me probably bought about 6 different battery covers and cases and always got rid of them because they never fit properly, or if I find one i DO like then they get cracks or the paint wears off.
And this is using the original! Brilliant idea.
Does the tape make the sides of the cover wider than the phone? You know how some cheap badly fitting battery covers seems to stick out at the sides where they should join seamlessly?

Of course it´s a bit thicker, but it fits pretty well Much better than those rubbish Back-covers from Ebay
And to clarify it: There is no problem with overheating at my phone at all....
Battery temps are the same as without the tape so i guess CPU and everything else will be the same too
Anyway temperatures highly depend on the modem-file you use...

I've got (yet another) back cover on the way from eBay, but I think this one may fit just right after talking to the seller... but this carbon tape idea i love! I was thinking about sanding down my stock Samsung back because i love the fit and everything, its' just too damn slippery.... and paint would scratch off over time. but sanding it (if it could be done evenly) would fix that.
Might consider this idea though. I wonder what different types of tape there are.... hmmm....

[MOD] Silver Ear Piece On Phone!!!

First off, this is a physical mod!!! you do this at your own risk!!!
Second, i seen this mod in the captivate section of xda and i cant find the OP so that i can give the guys credit, but credit goes to him for doing this to his captivate!!!
after i seen the thread about this i noticed that my friend, who has a captivate, had a chip in the ear piece and it was silver with black paint on top of it. after seeing this he said "Take it off!" and so i did...after doing it i seen it looked rather cool so i took a knife and started scratching the black paint off of mine. i think it looks good and gives it kind of an accent from all the black on the phone. If you decide to do this to your phone, please be careful when doing it and take your time. you dont wanna take this piece out or make it sharp and end up cutting your ear 1 day when you answer your phone, so again, please be careful when doing this mod!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FYI : Once you do this you cant undo it....unless you get some good paint and know how to paint this without filling the holes with paint!!!

Just did this, and I must say, it looks amazingly awesome. It also kinda smoothed the face down, making it seem more slick.

KillKount said:
Just did this, and I must say, it looks amazingly awesome. It also kinda smoothed the face down, making it seem more slick.
Click to expand...
Click to collapse
good...im glad you like it as much as i do...just gotta be gentle with it while doing it!
btw...i love your avatar!!! roy mustang ftw!

This reminds me of what I did with my iPod. I took a fine grain sandpaper and sanded the back of my iPod. Looks great now. Unorthodox mod to what we normally see but I dig it Tator, thanks.

What exactly do you do, just scratch off the paint there? Sand it?
I've also been wondering, on older phones you could use a sugar block and scratch off logos like the us cellular or samsung logo. Can we do that?
Sent from my MIUI SCH-i500

I just taped off around ithe speaker grate and used my pocket knife's small blade and she's silver and no scratches. keep in mind I keep my knife extremely sharp and was very very very gentle. It took about 5-10 minutes. Thanks tator. Kinda like the new look.
Edit, Also once you scratch most of it off. an damp alcohol pad seems to remove the remnants really well
Edit: OK so this is how I did it and have no scratches what so ever.
I taped the phone to my desk at work. then taped around the speaker.
Used a Knife to gently scratch off as much of the paint as I could.
Took a toothpick and cut one end as to make a sharp blade on the end and used this to "rub"off the paint down in the crease.
Then wet a q-tip and rubbed the remianng paint of the ear piece.
Hope this helps some that are wondering a way to do this.
I wish I wasn't at work. I would post a pic. Honestly it looks like it was made this way.

sageDieu said:
What exactly do you do, just scratch off the paint there? Sand it?
I've also been wondering, on older phones you could use a sugar block and scratch off logos like the us cellular or samsung logo. Can we do that?
Sent from my MIUI SCH-i500
Click to expand...
Click to collapse
just use a sharp knife...and be uber careful....and scratch it off
im guessing this should work the same for showcase as well as the fascinate too....but it would take someone trying and reporting back to verify!

I just did this to my mesmerize and it looks great it does look like it came put of the box this way adds a nice little accent to the face of my phone. Thanks for the idea
Sent from my SCH-I500 using XDA App

Mopuzi said:
I just did this to my mesmerize and it looks great it does look like it came put of the box this way adds a nice little accent to the face of my phone. Thanks for the idea
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
np....its what i do

you were baked, weren't ya tator?

I can confirm that this can be done with a dime and get a reasonably good result. I didn't have a knife handy but I did have some change so I scraped a dime across it until it turned silver. Looks fine. Not perfect, I will probably touch it up with a knife later, but it isn't bad and it didnt scratch the surrounding area. I wasn't even careful
Sent from my CM7 SCH-i500

sageDieu said:
I can confirm that this can be done with a dime and get a reasonably good result. I didn't have a knife handy but I did have some change so I scraped a dime across it until it turned silver. Looks fine. Not perfect, I will probably touch it up with a knife later, but it isn't bad and it didnt scratch the surrounding area. I wasn't even careful
Sent from my CM7 SCH-i500
Click to expand...
Click to collapse
well good stuff...get the rough crap with a dime...do the finer detail with a knife...will add this info to the OP

jpaulwaite said:
you were baked, weren't ya tator?
Click to expand...
Click to collapse
sober as a nun sir!!!

Touchpad Skinning job - Skinned my touchpad and you can too!

Thought I would post up pictures of my skinned Touchpad.
I skinned it myself using Drawer liner (Contact paper/contact vinyl). Dollar Store!
Other than that. Use some scissors and Xacto knife.
I made a post about how to on my blog a while ago.
http://doesitpew.blogspot.com/2011/09/dollar-store-finds-make-your-own-device.html
Enjoy!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I hand cut out all of the ports, being very careful not to scratch or damage the Touchpad. Looks nice eh?

Childofthehorn said:
Looks nice eh?
Click to expand...
Click to collapse
Not quite my taste, but yh - it does

Childofthehorn said:
Looks nice eh?
Click to expand...
Click to collapse
Yep, it does

lol ive seen that drawer liner pattern before excellent use of an abstract resource!
i also like the great job you did on the corners, looks really smooth

Don't worry boys, I did my fiance's TP in a wood Vinyl. You can get this stuff at the Dollar store and I find it does a better job than most of the other commercial options. The Vinyl is many times marked as 3M. Guys, we are royally getting ripped when it comes to the Vinyl (unless its Di-Noc).

Childofthehorn said:
Don't worry boys, I did my fiance's TP in a wood Vinyl
Click to expand...
Click to collapse
that would look amazing! with a wood panel BG? nature et la technologie, ensemble!
can you post pics of the other TP? if it looks good, i might do mine up

Solidus_n313 said:
that would look amazing! with a wood panel BG? nature et la technologie, ensemble!
can you post pics of the other TP? if it looks good, i might do mine up
Click to expand...
Click to collapse
+1 of pics of the wood one.
thanks!

scrizz said:
+1 of pics of the wood one.
thanks!
Click to expand...
Click to collapse
Agreed, +1 for pics of wood one.

lookin good
Childofthehorn said:
Looks nice eh?
Click to expand...
Click to collapse
I do have to agree, looks great! Cant wait to check out the wood panel
+1

http://housewares.hardwarestore.com/37-188-contact-papers.aspx
Have utilized this site before when working on my kitchen (lots of contact paper ).
Has a ton of different kinds too. Chalkboard, Wood, etc. Could be neat to see what flourishes.

SpunkyHeffer said:
http://housewares.hardwarestore.com/37-188-contact-papers.aspx
Have utilized this site before when working on my kitchen (lots of contact paper ).
Has a ton of different kinds too. Chalkboard, Wood, etc. Could be neat to see what flourishes.
Click to expand...
Click to collapse
that black marble looks pretty sweet.

SpunkyHeffer said:
http://housewares.hardwarestore.com/37-188-contact-papers.aspx
Have utilized this site before when working on my kitchen (lots of contact paper ).
Has a ton of different kinds too. Chalkboard, Wood, etc. Could be neat to see what flourishes.
Click to expand...
Click to collapse
I really like the Stainless steel look, but might that affect WiFi signal, Bluetooth or the touchstone charging?

Not much for that design, but love the idea!

Phireman said:
I really like the Stainless steel look, but might that affect WiFi signal, Bluetooth or the touchstone charging?
Click to expand...
Click to collapse
yes most likely if it made out of some type of metal. the charging dock uses a electromagnetic field to charge. on that note you do not want to put anything metal inbetween your touchpad and touchstone it will get really hot and cause problems

Any touchpad cut template you figured out?

Sorry for the Delay in getting back to you all.
I JUST GOT ENGAGED!!!!!!!!! and it was my birthday yesterday.
Anyways, I am working on a pattern for people to DIY it easier. I will try to verctorize it in inkscape so those with laser cutters (evil grin) can get perfect results. The pattern wouldn't take longer than a couple of minutes on a laser cutter tops.

Congrats on the engagement. Used to have access to all kinds of cool cut machines at a previous employer. At least I still have plenty of xacto and mat blades. Picked up a roll of the woodgrain. Figured, "why not?" Uninterested in the $30 skins, even if they look a bit cooler.

Childofthehorn said:
I JUST GOT ENGAGED!!!!!!!!! and it was my birthday yesterday.
Click to expand...
Click to collapse
Congratulations on both counts!!!

Just tried what the OP suggested. But I went with a clear/mat finish contact paper. None of the patterns work for me so went for clear came out nice will post pics tomorrow. I took me less then 3 mins complete the task (stuck it on used black marker to mark where to cut, then lift edges cut and stick back on and used a heat source near corners to smooth if out). I did not go all the way around to the front edge, instead trim it at the back side.
Next one I will remove old one and measure dimensions and make perfect template.
But very happy with results

Images
http://www.box.net/shared/hkgo3hhm45sijv9g7afg
http://www.box.net/shared/7nm08zldxa0gs8xs7mfl

Replaced just the glass, saved the digi/lcd (With video)

Well I read a lot of places that it couldn't be done. I have successfully replaced just the glass. I recorded it on my Gopro so everyone can see how its done. If you find it useful hit the thanks Make sure you spread this around so people stop buying 300 dollar full LCD assemblies.
without further adieu
http://www.youtube.com/watch?v=W4Gx5fLy0NQ&feature=youtu.be

That's impressive. Props to you for not listening to everyone else did you do any damage to the outside rim around the display? It looks like you hacked it up with the knife in the beginning getting off the old display.
Excellent work. This video is a keeper.

mustbepbs said:
That's impressive. Props to you for not listening to everyone else did you do any damage to the outside rim around the display? It looks like you hacked it up with the knife in the beginning getting off the old display.
Excellent work. This video is a keeper.
Click to expand...
Click to collapse
I used an area that already had some scuffs from a drop. No noticeable damage.

Good work man! It's individuals like you who push us forward and reveal new options.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SAMSUNG-SGH-I717 using xda app-developers app

this thread should get stickied all across versions of s3

There is a thread in one of the other forums about this http://forum.xda-developers.com/showthread.php?t=1890708&page=11
but yeah this helps all S3 owners
---------- Post added at 10:57 PM ---------- Previous post was at 10:36 PM ----------
But yeah very good job dude. Mine cracked at the bottom corner https://sphotos-a.xx.fbcdn.net/hphotos-snc7/s720x720/386262_10151093476528557_832449593_n.jpg
I ended up throwing a tempered glass screen protector on it, and its not too bad
http://i50.tinypic.com/34orkpk.jpg
http://i46.tinypic.com/e7koat.jpg
I dont know if it would be worth changing out for me right now, or just rock it til I break it lol

hypertek said:
There is a thread in one of the other forums about this http://forum.xda-developers.com/showthread.php?t=1890708&page=11
but yeah this helps all S3 owners
---------- Post added at 10:57 PM ---------- Previous post was at 10:36 PM ----------
But yeah very good job dude. Mine cracked at the bottom corner https://sphotos-a.xx.fbcdn.net/hphotos-snc7/s720x720/386262_10151093476528557_832449593_n.jpg
I ended up throwing a tempered glass screen protector on it, and its not too bad
http://i50.tinypic.com/34orkpk.jpg
http://i46.tinypic.com/e7koat.jpg
I dont know if it would be worth changing out for me right now, or just rock it til I break it lol
Click to expand...
Click to collapse
I wouldn't lol

kobz1973 said:
this thread should get stickied all across versions of s3
Click to expand...
Click to collapse
Agreed

I love the fact that you had a beer sitting next to you in the video. Awesome!

mamba94 said:
I love the fact that you had a beer sitting next to you in the video. Awesome!
Click to expand...
Click to collapse
Had to have a decent buzz before I had the courage hah

Nice and straight to the point. The glass doesn't contain the digitizer, right? It also doesn't need to be glued to the actual oled itself? Isn't the glue between the glass and the oled causing the dark blotches? The oled should be plastic so you should be able to clean it with a light solvent before putting the new glass on. Sorry for so many questions. I haven't cracked mine but its nice to know it can be fixed cheap.

Imatoasta said:
Nice and straight to the point. The glass doesn't contain the digitizer, right? It also doesn't need to be glued to the actual oled itself? Isn't the glue between the glass and the oled causing the dark blotches? The oled should be plastic so you should be able to clean it with a light solvent before putting the new glass on. Sorry for so many questions. I haven't cracked mine but its nice to know it can be fixed cheap.
Click to expand...
Click to collapse
I have no dark blotches. My screen i would say looks 99% factory. I dont know iy I should have added extra adhesive. If my screen falls off I will be sure to mention it. I tryed prying up on it after it cooled and it seems the old glue is sticking very welll:good:

received an email today from amazon saying the seller could no longer supply my item .... i placed the order last bloody friday ...
so i have had to re-order my front screen ....
more waiting ... im getting impatient as my screen looks like this

YellowGTO said:
I have no dark blotches. My screen i would say looks 99% factory. I dont know iy I should have added extra adhesive. If my screen falls off I will be sure to mention it. I tryed prying up on it after it cooled and it seems the old glue is sticking very welll:good:
Click to expand...
Click to collapse
Idk if you saw the threads about the dark blotches when viewing a black image at night. They show up on every phone from the factory. I thought that after your method that a side effect would be those would be gone. This makes me worry less about getting a case

Imatoasta said:
Idk if you saw the threads about the dark blotches when viewing a black image at night. They show up on every phone from the factory. I thought that after your method that a side effect would be those would be gone. This makes me worry less about getting a case
Click to expand...
Click to collapse
I will have to check about these darkspots at night. Ive never noticed this, even before my phone screen smashed

YellowGTO said:
Had to have a decent buzz before I had the courage hah
Click to expand...
Click to collapse
Thanks for taking the time to post this! very cool

Does the screen come with the required adhesive to stick to the bezel? if not can anyone post what kind of adhesive they use replace the screen.

dlx509 said:
Does the screen come with the required adhesive to stick to the bezel? if not can anyone post what kind of adhesive they use replace the screen.
Click to expand...
Click to collapse
Depending where you get your glass from, i believe some do come with 3M tape cut into the correct shapes ...
the OP did not use anything just the glue that was left there ...

kobz1973 said:
Depending where you get your glass from, i believe some do come with 3M tape cut into the correct shapes ...
the OP did not use anything just the glue that was left there ...
Click to expand...
Click to collapse
This is correct. I just reheated the old glue backup. So far its been jiggled around it my GFs purse for the last 3 days. Its still holding