Related
** PLEASE, READ THE GUIDE BEFORE FLASHING **
Flashing a device is a risky process, and you definitively have to know that your device might not boot correctly, or not boot at all. You must also notice that this method is being tested and some components of your Polaris will not working at the moment. Take into consideration that there are developers that are sharing all their work with us, but although they're really good at their job, they all have their lives. So, if something just doesn't work, please, be patient*
NAND Boot for Polaris! Made possible thanks to DZO!
This method will allow you to start Android without the need of Windows Mobile. It will just boot like if the device had a native Android OS installed onto it.
- You may see this guide really long, but it's because I tried to detail every step and I put lots of URLs to make the process easier for beginners It's not than difficult as it seems!
Step by step guide:
Needless to say that you need to have HardSPLed your device first!
1. CHOOSE YOUR ANDROID BUILD
You can install try to install any build from the Kaiser and Vogue forums. They should work for Polaris:
I personally recommend to start with Myn's Warm Donut Release 5.
You can choose it in two different screen resolutions
240x320 (my favorite) - http://download219.mediafire.com/t0lnxmijgEjg/1drm2jqwjzn/myn-WarmDonut-04-24-2010-240x320-110.zip
320x480 - http://download533.mediafire.com/ml1jxoyomIDg/miw2uzjjzjq/myn-WarmDonut-04-24-2010-320x480-160.zip
If you want more info, check its thread: http://forum.xda-developers.com/showthread.php?t=619980
Download the build. It may be a compressed file containing an androidinstall.tar.
Copy this androidinstall.tar under a folder named andboot at the top level of your SD Card. The file path should be /andboot/androidinstall.tar.
You're now ready to flash the OS loader.
2. -OPTIONAL, BUT RECOMMENDED. ERASE YOUR ROM.
To be sure that you won't have problems with the flashing, you should use a tool that executes the called Task 29 to clean the NAND memory in the device. This helps the flashing goes OK and minimizes the chance of a bad flash.*
Fortunately, there's such tool: It can be downloaded HERE (big thanks to leppa).
It's a hacked flashing tool. To make it work you will have to select a dummy .NBH file. Use the .NBH file you want, preferably a small one. You can use the one that you will download in step 3.
You it finishes the operation, your phone will NOT boot. Don't worry. This is normal. We will make it boot soon.
More info HERE: http://forum.xda-developers.com/showthread.php?p=6227425#post6227425
3. FLASH THE ANDROID OS LOADER TO NAND
You will need a .NBH in order to boot from NAND. It's usually named polaimg-panel[x]-[resolution]-[date].nbh.
I personally recommend to flash of the .NBH files by DZO dated 07-May-2010. They are listed on his site: http://it029000.massey.ac.nz/vogue/files/?C=M;O=D
Choose one according to your paneltype and resolution. Your paneltype depends on its maker. You should try from 1 to 3 to see which one works for you.
Flash the .nbh file you downloaded with your prefered tool (I used CustomRUU.exe for Windows).
To flash your device you might have to put your Polaris in bootloader mode. To enter this mode you have to do the following:
Press and hold the camera button.
Press reset while you hold the camera button. Release it (the reset button).
Hold the camera button until the colored bars screen appears.
If it doesn't work, remove the battery, wait for some seconds, put it back and try again.
When the colored screen (Hard SPL) is shown, you are ready to flash it using the flashing application (CustomRUU.exe, for example).
4. INSTALL YOUR BUILD
When you're done flashing, your device will boot. You will now attempt to install your build using the file androidinstall.tar.
You'll see lots of text lines scrolling while it boots. Now, pay close attention to the next step.
The system will prompt you to press and hold the center button of the DPad (in the middle of the jog-wheel) to start the Android Installer. It's a message like "Press x to launch the installer". Don't forget to hold it until the installer is shown!
The installer will eventually start.
A list of options should appear (in text mode). Use the jog-wheel up and down to navigate. D-pad center to select.
Choose your installation options (I selected System on NAND, Data on NAND). Don't choose any other option unless you know what you're doing.
Install it! (if it ask you to wipe the data, select yes).
Wait for the installer to finish.
The menu should appear again.
5. INSTALL THE SPECIFIC UPDATES FOR POLARIS
Due to particularities in our devices, some hardware like Wi-Fi and Bluetooth won't work properly if you don't apply some updates first.
You will need a file an androidupdate.tar to apply to the just installed system.
You can download it HERE (thanks to l1q1d).
When applied, the installer will be shown again.
You now have to select Fix permissions to avoid problems.
Don't exit the installer: soft reset your Polaris instead.
YOU ARE DONE! Your Android system will boot after some minutes.
Things that should WORK:
Phone calls: incoming/outcoming
Texting (SMS)
Data connection (GPRS/3G)
Wi-Fi
GPS
Bluetooth
Things that DON'T WORK:
USB Storage Mode
USB debugging is unstable.
Tethering
Camera (in Eclair)
Headset
Bugs/Issues:
Sometimes Wi-Fi hangs while is being disabled and prevents the device from suspending correctly (it won't sleep and the screen will turn of every time you press a button).
Data connection goes down from time to time and it won't reconnect until you go to the Modem application, disconnect, connect again and wait it to connect.
Audio Input: faulty and unusable with most of applications that use it.
* Enjoy and feel free to donate to our GREAT developers.
* I donated to our developers, and I'm from Spain. As everybody know, Spain is falling like a fainted Pokémon thanks to Zapatero (Mr. Bean II). If I can donate, how couldn't you do it?
I'm trying now.. Sorry my english...
They state that it's valid also for HARET:
if you're doing it with haret, extract basefiles to your sd, plop the androidinstall.tar into the same folder, and boot, hold down volume up just like the nand people (but don't pick nand to store the files, it won't work)
Click to expand...
Click to collapse
I've tried with the specified basefiles and plemen's Android 2.1, but I had no luck.
I noticed that when I press run from HARET and the progress bar fills up, it vibrates two times. Then, it seems that the device is hung, but after 15 seconds (or more), it boots. However, I didn't complete the rootfs-less setup process. It complaints about this:
Unable to open persistent property directory /data/property errno: 2
Click to expand...
Click to collapse
Anyone?
Wait, does this mean its totally an Android ROM? If so, COOL!
haven't tried yet ^^
Did you take the last package on sourceforge for the Eclair 2.1 Build? The files on Mediafire was corrupted.
I think there is no speed improvement with this, it's "only" an easier way to install and upgrade the system.
This is NOT "totally an Android ROM".
i can't install with this method
is there a "how to" or forum thread somewhere cause i get
sh: 2: unknown operand
losetup: /dev/block/loop1: No such file or directory
Failed
Failed to reach system.img on SD Card
Click to expand...
Click to collapse
during setup it complains "cant create folder /system cause file already exist"
i put basefiles at the root of my sd card and the vogue .tar in a folder call /andboot
all taken from here http://sourceforge.net/projects/androidhtc/
I think that you must flash a nbh that only works in vogue yet. I try to flash but it stop at 33%. I think that we must wait.
luzbel_es said:
I think that you must flash a nbh that only works in vogue yet. I try to flash but it stop at 33%. I think that we must wait.
Click to expand...
Click to collapse
Yeah, same problem. It's impossible to flash now with any package for Vogue or Kayser...
We have to wait for DZO's work to port .tar and . NBH for us...
Hi fellas:
I carried out research about the new boot up method, and it seems it will be compatible with our beloved Polaris. But it still needs some fine-tuning, first of all due to the fact that the new installer is started holding down VolUp, but this button isn't correctly recognized with the current bits.
In other words, we should wait before trying out this one. Vilord is aware of this issue.
Stay tuned!
Hi SuperJmn,
Of course I wait for ...
I look every day in the Vogue/Kaiser thread and hope we can to flash our Polaris next time.
Thanks.
Android should work much more faster after flashing... Can't wait to try this
manu33xtro said:
Hi SuperJmn,
Of course I wait for ...
I look every day in the Vogue/Kaiser thread and hope we can to flash our Polaris next time.
Thanks.
Click to expand...
Click to collapse
Hey
I have pola100 with pcar latest non-3d, Im trying my luck to get android started but with the latest files (img, rootfs, zImage) I am not able to. tried hell lot of combinations.
can you suggest me which one would I use, I downloaded some from sourceforge!
but I read that the new rootfs is for nand....
please friends guide me to right downlaods and versions for a near perfect android installation
Thanks in advance....
Niranjan
Hi! The new method is not only for NAND, but also for SD booting. It has some incompatibilities, so it's working for Vogue for the moment (Vogue owners are a bit more lucky than us in terms of development).
We are waiting for @vilord, @DZO and other authorities to fix the appropriate files.
I will contact them right after I end up writing this
Updated information for NAND boot. Thanks DZO!
Can you give us some feedback? Does it run better, smoothier than before? Or nothing about that?
it work but this resolution is not userful for me. No more speed than haret method, wifi and camera not work, system freeze some times. Do you have this problems?
How to put device in bootloader
Hello,
I've installed Android on my POLA100 (NAND method). Until now it's working fine. When I tried to put my device in bootloader mode, after installing Android, surprise... the combination (camera button pressed + stylus reset) isn't working.
If you used this: Eclair build you should download this update too: update for qvga and put androidupdate.tar from this archive on the andboot folder on your sdcard near androidinstall.tar.
After installing the system like SuperJMN said you'll have to press the power button one more after system reboot and choose update... from the menu,then quit when the menu reappear.
WIFI,Camera,Bluetooth doesn't work on this build(the only one I've tested with this new method)
Thank you SuperJMN for posting this,I hope it will remain for a long time on the front page and many thanks to DZO,VILORD,JAMEZELLE,PLEMEN and all other guys for the hard work.
Polaris
Hi,
for polaris you push power button, and boot menu works(NAND and SD).
The issue is that Wifi is not working now.
I try several builds.
So it seems not depending on the system?
Regards
How to put device in bootloader
Solved it. I put my device in bootloader by pressing the camera button + stylus reset when Android loads. I don't know if it worked because I removed my SD card and on the screen appeared "Waiting for SD card" but in that moment I've reset the device in bootloader.
Hello My Friends I've Heard You Are Having Troubler Installing The New Upgrade Or Understanding What Is Needed To Be Done.
Note: THIS IS A WINDOWS BASED HOW TO AND WILL WORK ON WINDOWS ONLY
Before I Start I must Say, This Is a combination of process and I have not created any of those files or own the right to them so all the links are the same links found on other posts from where i got the info, so by downloading those files you are, supporting them not me i take no credit for this work
Well Here Is the quick Easy Guide In How To Do This
-Fist we Need To Get The Tools To Perform This Operation
pulled From This Tread we need
1. Motorola Drivers For Either 32 or 64 Bits
2. RSD Lite, witch is a tool for flashing your phone.
3. The GOT Open Recovery ToolUpdate: Added Latest version from G.O.T.'S Blog
4.The Firmware Files From Got
2.2.1 FIRMWARE FILES
DACH – GERMANY
http://www.multiupload.com/G9PP7JN78C
DACH AUSTRIA
http://www.multiupload.com/P8DDXCWW03
RETAIL EUROPE (RTEU)
http://www.multiupload.com/6X7H39HGCG
FRANCE RETAIL
http://www.multiupload.com/PK28LXE4SE
ITALY WIND
http://www.multiupload.com/3KYMZNRZW2
UK RETAIL (RTUK)
http://www.multiupload.com/60B78PRKNY
TELUS CANADA
http://www.multiupload.com/5S2CYGP3VW
Click to expand...
Click to collapse
EDIT: G.O.T. Has Added the burnerable open recovery to these sfb files so no need to flash it latter
-Now That We Have The Stuff We Need We are going to do it, fist i must say that unlike other roms that are applied by a backup restore (corect me if im whrong) this is a full flash and its going to reset everything so no apps will remain no setting will remain and is highly recommended that you uninstall every app you have, don't back them up(except for apps some apps that have a create backup file, those seem to work) just uninstall them, and when we are done have them installed again, Here Is A Tool That Will Help You Get There Faster
1.ok you have everything uninstalled right? now time for some action
2.install the proper divers (32 or 64)
3.install the RSD Lite tool
4.unzip the 2.2.1 FIRMWARE FILES you downloaded and you will find a ".sbf" file
5.now connect your phone to USB cable and turn it off
6.boot it in boot-loader mode (press the D-PAD UP key while pressing the power button), some night need you to release the button after a minute, a black screen will be shown on your phone and you will see the divers being installed on your computer.
7.when drivers are done open the RSD Lite tool and your device should appear you can click on it to see details.
8.now click on the "..." buttons that are close to the start button and look for the ".sbf" file, after a couple of seconds it should be ready to start
9.press the start button and do not unplug the cable or let your computer show the screen saver or go to sleep, the posses must not be stopped while it has started .
10.when the posses is done the devise will restart and voala, you have 2.2
-As GOT stands there are some bugs on the firmware and they have developed a fix to them and get root and overclock, here is what you have to do.
1. unzip the got open recovery tool into the root of your SD card
2.check this quote
NOTE: On some devices, we have encountered that rooting directly after flashing without rebooting after the initial flash can bring some issues with RootExplorer not asking for root permissions. To be safe, reboot after flash so that the “welcome to milestone” menu comes up, set up the device in general, then reboot to recovery and root the device as well as apply our 2.2.1 tweaks with Launcher, Services.jar fix and Wireless Tethering app.
Click to expand...
Click to collapse
this means if the fist time your milestone got restarted and you saw "Welcome to Milestone" Message You are good an you can root.
but if you didn't then restart you phone and see if the message comes out, if not , a factory reset should have that scree message shown.
3. open the open recovery by pressing camera and power button at the same time while the device id off. you should see a scree with a "!" symbol on it then press fist volume rocker up button a leave it pressed then press camera button, some letter will pop out.
4. using the pad scroll down to "apply update.zip", after a couple of seconds the GOT menu should pop out (everything from now on uses the pad)
5.root your phone (why not)
6.go down to "Launch 2.2.1 Menu" Option.
7.Here you will see the "Fix Bugs They Are Talking About
One of the first things you should do is use the “Fix 2.2.1 bugs” selection in the new OR 2.2.1 menu after you flash the sbf file.
This tweak will fix some of the issues with the generic sbf build such as dual USB notifications, replacing some stock Motorola applications such as the old launcher/mediagallery and adding the Wireless Tethering application.
Click to expand...
Click to collapse
8. there is the overclock too.
Now your device should have all the things you need to start playing with it,I encourage you to check on some tweaks the GOT team might have, and you might want.
I Hope This Was Helpful enjoy ^_^
To Do For This thread:
Code:
1. Make It More Easy To Use, and clear to read
2. Add Suggestions
3. Add screenshots
4. Add Other OS Options
5. Add Attachments (For Some reason I Can't Now)
Please Post And Rate If This Was Useful
Bug Counter:
Common Problems Found On Thread
http://forum.xda-developers.com/showthread.php?t=810726
1. AppBrain Market Sync Not Connecting To server.
2. Google Chrome To Phone Not Working.
3. WiFi Having Trouble To Connect On Some Routers, Sometimes Not Connecting At All on WPA2
4. Activating The Camera From The The Albums Will "Force Close"
5. Facebook Sync Is Not Working
6. The menu button on the keyboard activates the voice recognition option, and cannot be used to trigger shortcuts anymore (To me its more like a change on the way the keyboard works instead of a bug since you can use the menu button on the screen to trigger keyboard shortcuts)
7. No Vibration On key press
8. Russian Language Will Have Problems with phone and contacts apps
9. problem with android id
If Any Of Those Work On Yours Please Report Witch version you installed maybe yours can help fix others,you think you found a bug and its not listed? post it here and post
Fixing Problems:
1. Problem with android ID:
A. If Not Installed The Update Yet(Needs Root)
-Install This AppAndroidID
-Back your android ID up, and put ir somewhere safe
-follow the guide to update to froyo
-Install This App againAndroidID
-restore your android id
B. If Already did it(Needs Root)
-install this appAndroidID
-invent a number that might serve as your android ID (you need numbers and letters)
-input it on the app
okay nice tut, butttttt... im stuck at the part where i should install openrecovery. at first, to come to the "!" screen, camera screen + power did not work. i got there by pressing X + Power... but now i dont know how to access the menu where i should install update.zip..
please help!
November91 said:
okay nice tut, butttttt... im stuck at the part where i should install openrecovery. at first, to come to the "!" screen, camera screen + power did not work. i got there by pressing X + Power... but now i dont know how to access the menu where i should install update.zip..
please help!
Click to expand...
Click to collapse
okay i got it, im so sorry, i used the up button on the dpad
Also I did not see a launch 2.2.1 menu option. But I have currently launched the GOT open recov without an issue. I have rooted as well as many other things but didn't see that specific menu.
FoTwoZero said:
Also I did not see a launch 2.2.1 menu option. But I have currently launched the GOT open recov without an issue. I have rooted as well as many other things but didn't see that specific menu.
Click to expand...
Click to collapse
Silly question are you suing the newest version?
if you press down should on the open recovery menu it should be your sixth option, I have recorded a video about it this morning but its backwards I'm Going To Try And Have it Fixed and up today hopefully
For Tmobile USA ?
Which SBF for a german Mlestone on TMobile USA ? Will telus do fine ?
gbzygil said:
Which SBF for a german Mlestone on TMobile USA ? Will telus do fine ?
Click to expand...
Click to collapse
your Should use the rom depending on which band your phone has
German milestone should work with Europe ROM
under setting about phone check the Build Number
and look for that same number in here
http://and-developers.com/sbf:milestone
it will give us an idea where the phone is actually from
hi there. i have instaled europe GOT_RTEU_2_2_1FULL.zip version and now sometimes my touchscreen does not work. i mean that if i put the phone in standby and i try to unlock the touchscreen is not responding. i have to power off/on to make it work again. thanks in advance
Facebook app wont Synch with my contacts on first launch of FB app.
No other bugs so far...
Israel milestons should use retail europe?
Sent from my Milestone using XDA App
protozeloz said:
2. Google Chrome To Phone Not Working.
Click to expand...
Click to collapse
for me it's working perfectly. RTEU
Thank for this tutorial.
My milestone works fine so far, but 3g mobile hotspot and wireless tether not working.
Flash on milestone is so cool
something i don't get
I updated the firmware with RSD Lite, and used the one click tool, because:
whenever i try to hit update.zip i will get an errormessage, stating that these blocks couldn't be found -> ergo, the card not be mounted.
The HTC stuff i always managed, but this one is a mistery to me. Also, i did format fat32, pushed the stuff and then straight on bootup trying to hit the update.zip, without success.
I've read about how other people solved that problem, none of those approaches helped me.
Any hint is more than welcome.
2 bugs i've discovered so far: Battery drain like almost to be declared useless, some market apps "vanish" after installing them. I suppose those fixes would have done the job. I might attempt to use root explorer and execute the scripts like that, still I'd like to know why I'm unable to get the update.zip, resp. the G.O.T or any other "intelligent" boot menu installed.
Edit2: Even when installing the vulnerable sbf, i still get the error: E: Can't mount /dev/block/mmcblk0p1 ....
plvt_florian said:
hi there. i have instaled europe GOT_RTEU_2_2_1FULL.zip version and now sometimes my touchscreen does not work. i mean that if i put the phone in standby and i try to unlock the touchscreen is not responding. i have to power off/on to make it work again. thanks in advance
Click to expand...
Click to collapse
This could be for any reason try this
-Re download and re flash the files(do the whole thing again)
-there is an app i have called sd dual mount that makes my screen go crazy wen i connect the phone to an usb port, it was stable on 2.1 but now goes crazy on 2.2 check some of your apps to ensure they are not the ones responsible for this
hanslast said:
Facebook app wont Synch with my contacts on first launch of FB app.
No other bugs so far...
Click to expand...
Click to collapse
yurasts said:
Israel milestons should use retail europe?
Sent from my Milestone using XDA App
Click to expand...
Click to collapse
you can try with the retail Europe,
evolucja said:
for me it's working perfectly. RTEU
Click to expand...
Click to collapse
can you tell me if you have an android ID? it should work when your device has it
czescdziadek said:
Thank for this tutorial.
My milestone works fine so far, but 3g mobile hotspot and wireless tether not working.
Flash on milestone is so cool
Click to expand...
Click to collapse
you can try and uninstall the wireless teeter app an have it reinstalled that should sort it out
MenoDev said:
I updated the firmware with RSD Lite, and used the one click tool, because:
whenever i try to hit update.zip i will get an errormessage, stating that these blocks couldn't be found -> ergo, the card not be mounted.
The HTC stuff i always managed, but this one is a mistery to me. Also, i did format fat32, pushed the stuff and then straight on bootup trying to hit the update.zip, without success.
I've read about how other people solved that problem, none of those approaches helped me.
Any hint is more than welcome.
2 bugs i've discovered so far: Battery drain like almost to be declared useless, some market apps "vanish" after installing them. I suppose those fixes would have done the job. I might attempt to use root explorer and execute the scripts like that, still I'd like to know why I'm unable to get the update.zip, resp. the G.O.T or any other "intelligent" boot menu installed.
Edit2: Even when installing the vulnerable sbf, i still get the error: E: Can't mount /dev/block/mmcblk0p1 ....
Click to expand...
Click to collapse
have you tried re downloading the files and doing all over again?, it could be a broken file
thats why i tell devs and chefs they should add an MD5 sum to their files larger than 20MB some errors are caused by just having downloaded broken files
Root phone from the GOT OR menu doesn't seem to actually root my phone (2.2.1 UK version)
Superuser whitelist app FCs instead of prompting to allow access. Have tried using Better Terminal for root access & also Wireless Tether app.
Anyone else getting this? Any ideas? Do any of the 1-click root apps still work with this build of Froyo? Which can we use?
aboycalledsu said:
Root phone from the GOT OR menu doesn't seem to actually root my phone (2.2.1 UK version)
Superuser whitelist app FCs instead of prompting to allow access. Have tried using Better Terminal for root access & also Wireless Tether app.
Anyone else getting this? Any ideas? Do any of the 1-click root apps still work with this build of Froyo? Which can we use?
Click to expand...
Click to collapse
i can confirm this. Simply trying it a second time worked for me
I'd like to add something for Linux users:
Using a virtual machine (virtualizing WinXP) that has USB support (eg Oracle VM VirtuaBox, since VirtualBox OSE does not support USB forwarding) can do this pretty easy. So no worries when trying this via a VM.
i try to instal GOT and its succesfull.
but why i install the application not bring to SD card
but still bring to internal memory
many said 2.2 automatic have app2sd
can you help me?
THX
m0jo said:
i can confirm this. Simply trying it a second time worked for me
Click to expand...
Click to collapse
not for me unfortunately!
weird...
Let's begin
1st download all the necessary files:
Motorola 5.4.0 Driver with MotoHelper http://www.motorola.com/consumers/v/index.jsp?vgnextoid=bda09ec8009a0210VgnVCM1000008806b00aRCRD
stock UK XT720 sbf and RSD Lite 4.9 from http://forum.xda-developers.com/showthread.php?t=953863
SuperOneClickv2.1.1 ftom http://forum.xda-developers.com/showthread.php?t=887416
OI File Manager or from Android Market
Open Recovery for XT720 from http://forum.xda-developers.com/showthread.php?t=1242259
CM6 RC3 from http://forum.xda-developers.com/showthread.php?t=1197655
Then proceed to install the windows drivers for XT720,
once that is done flash your XT720 back to factory stock,
to go into ROM flashing mode Hold Power + Volume Down + Camera buttons all at once, be patient, it will take a while and a couple of reboot.
When the phone is finally done booting up, go into Settings > Applications, and check the boxes for USB debugging + Stay awake,
now you can run SuperOneClickv2.1.1 to root your XT720, for step by step rooting instructions follow this guide http://forum.xda-developers.com/showthread.php?t=887416
Next you will want to install a File Manager to your XT720, the stock XT720 doesn't include any file manager,
open a command line (in windows run CMD),
switch to the directory ..\SuperOneClickv2.1.1-ShortFuse\ADB\
run the command line adb.exe install FileManager-1.1.6.apk
The next step is best done using a microSD card reader, then you can drag & drop all the files for your XT720 directly to the SD card from Windows Explorer
- OpenRecovery.apk,
- the unzipped files from OpenRecovery-XT720-01 folder,
- update-cm-6.3.0-RC3-MilestoneXT720-signed.zip,
- gapps-hdpi-20101114-signed.zip
Using the OI File Manager install OpenRecovery.apk (it should be at the root of your SDcard),
run Open Recovery from XT720 stock launcher's app drawer,
select Install Recovery System (allow super user),
then follow the instructions to install OpenRecovery-XT720-01 from http://forum.xda-developers.com/showthread.php?t=1242259
Once you are done proceed to install update-cm-6.3.0-RC3-MilestoneXT720-signed.zip, and gapps-hdpi-20101114-signed.zip using OpenRecovery-XT720 (for details follow http://forum.xda-developers.com/showthread.php?t=1197655),
select clear cache, dalvik, and factory reset
choose the reboot option from OpenRecovery-XT720 menu,
the first boot of CM6 will take a very long time,
when you see the launcher, let it finish loading, then reboot the phone again via power button > reboot,
after this last reboot, the phone is finally ready for normal usage.
Enjoy!
You can get the Dexter's OpenRecovery.apk here
you can use universal androot to root your phone alternatively. its super easy. just drag it onto your sd card (or download directly from your phone), install the apk, and click root. heres a link. http://www.4shared.com/file/HvHnis8C/Universal_Androot_v161.html
I actually did this to a friends xt720 yesterday and I needed to fix the APN settings, he wasn't getting data.
WARNING, about BusyBox newer than v1.17.1 and Link2SD
So i found out the hard way there's an odd bug with BusyBox 1.18.x or newer it conflicts with Link2SD, it wont mount and causes Link2SD to throw this message
Code:
Mount script error
Mount script cannot be created
mount: mounting /dev/block/vold/179:2 on /data/sdext2
failed: no such device
reverting BusyBox back to 1.17.1 fixed the problem
Help on Boot Loop
Followed all instructions here to update to the the cm 6.3.0 RC3. Everything appeared to go as stated, but after reboot i seem to be stuck in a vicious boot loop. I get the cyanogen mod droid logo but it seems to pop up every 10 seconds or so without the phone ever starting up. Any help would be greatly appreciated. It's cute as a paperweight, but not much good as a phone.
Disregard....after rebooting for nearly nine hours....the phone finally started up and appears to be working....Thanxxxx
I too now am unable to access data....i am not skilled enough to work with the APN settings. Could you please help me out on what i need to do to get my data working again...no internet access sux....
AllGamer said:
Next you will want to install a File Manager to your XT720, the stock XT720 doesn't include any file manager,
Click to expand...
Click to collapse
Awesome Instructions bud, much needed for the first timers. Just thought I would add that stock 2.1 always came with quickoffice for me and that's what I normally use at first to install Open Recovery but always end up needing a better File Manager anyway. So either way, I hate to be a stickler just might be one less step lol. Good job AllGamer dude!
Ps.. I should have just said good job dude your way is better lol.
hitech1 said:
I too now am unable to access data....i am not skilled enough to work with the APN settings. Could you please help me out on what i need to do to get my data working again...no internet access sux....
Click to expand...
Click to collapse
Install APN manager from the market and find your carrier there.
You could always just input them manually, doesn't require any skill bud, you just have to google the correct APN configuration details.
nice App
JiroPrinz8 said:
Install APN manager from the market and find your carrier there.
Click to expand...
Click to collapse
https://market.android.com/details?id=ale.android.apnmanager&feature=search_result
this is an Excellent recommendation.
I didn't even know such APP existed
it's so easy to enter APN data... pick and choose, done!
Don't think you should be flashing ROMS if you're hesistant about manually entering an APN, my 2 cents lol.
I would still rather recommend singapore rom, with the tv out and everything. Don't know of any cons with this atm.
Hi,
i installed cm6 rc 3 as described above. And it runs very smooth and stable.
Although i have one big problem: If i insert my sd-card (3gb fat + 1 gb ext4, with app folder on ext partition) in my phone, app2sd works as it should and the phone boots as usual. But when the phone shuts off the display and goes into sleep mode, i am no more able to wake it up again. When I push the power button only the leds switch on. I have to pull the battery and restart the phone.
If sdcard is not inserted, everthing works great. with no problems since three days now.
But i would like to have my sdcard back...
Perhaps some can help me.
Leotronick said:
Hi,
i installed cm6 rc 3 as described above. And it runs very smooth and stable.
Although i have one big problem: If i insert my sd-card (3gb fat + 1 gb ext4, with app folder on ext partition) in my phone, app2sd works as it should and the phone boots as usual. But when the phone shuts off the display and goes into sleep mode, i am no more able to wake it up again. When I push the power button only the leds switch on. I have to pull the battery and restart the phone.
If sdcard is not inserted, everthing works great. with no problems since three days now.
But i would like to have my sdcard back...
Perhaps some can help me.
Click to expand...
Click to collapse
I'm not certain but I think this means that Android thinks your battery has more charge than the hardware does. I would first try to redo battery calibration (there are threads in the XT720 general section about how to do this) if you can convince yourself that your battery is actually full. It can be a little tricky.
Leotronick said:
Hi,
i installed cm6 rc 3 as described above. And it runs very smooth and stable.
Although i have one big problem: If i insert my sd-card (3gb fat + 1 gb ext4, with app folder on ext partition) in my phone, app2sd works as it should and the phone boots as usual. But when the phone shuts off the display and goes into sleep mode, i am no more able to wake it up again. When I push the power button only the leds switch on. I have to pull the battery and restart the phone.
If sdcard is not inserted, everthing works great. with no problems since three days now.
But i would like to have my sdcard back...
Perhaps some can help me.
Click to expand...
Click to collapse
might be your vsel being too low. it happened to me too, and i made the vsel a little higher and it didnt happen anymore.
Hi, I have a noob question...
Can I install this recovery image (CM6) directly from stock Videotron SBF?
I do have install open Recovery based on Androidiani. Can I flash this Rom (CM6) with that recovery or I need something diffrent?
Thanks for your help!
speedmax said:
Hi, I have a noob question...
Can I install this recovery image (CM6) directly from stock Videotron SBF?
I do have install open Recovery based on Androidiani. Can I flash this Rom (CM6) with that recovery or I need something diffrent?
Thanks for your help!
Click to expand...
Click to collapse
if you are already on stock, then yes you can flash CM6
but make sure you are rooted first
and use the Open Recovery XT720 listed in the OP topic
AllGamer said:
if you are already on stock, then yes you can flash CM6
but make sure you are rooted first
and use the Open Recovery XT720 listed in the OP topic
Click to expand...
Click to collapse
Thanks, I Will proceed tomorow.
Regards,
Sent from my MB860 using xda premium
Just installed! Working nice...
Camera and camcorder are working, it was a bug with stock Rom.
Is there a Overcloking kernel for XT720 CM6 rom?
Or is there a way to overclock it with the current one?
Regards et thanks for your help!
speedmax said:
Just installed! Working nice...
Camera and camcorder are working, it was a bug with stock Rom.
Is there a Overcloking kernel for XT720 CM6 rom?
Or is there a way to overclock it with the current one?
Regards et thanks for your help!
Click to expand...
Click to collapse
yes, just download the milestone OC utility from Android market
Hello everyone i have a problem with my htc hd2 this is my first time flashing my phone and it went smooth until i try to put the rom in my sd card. it always tells me that the zip file is no longer on my computer but out of curiosity i tried ad recovery to see if the zip file is there and it is there but when i try to load the custom rom it says the zip file is (bad) and installation aborted i don't know what to do next
iluuvmochi said:
Hello everyone i have a problem with my htc hd2 this is my first time flashing my phone and it went smooth until i try to put the rom in my sd card. it always tells me that the zip file is no longer on my computer but out of curiosity i tried ad recovery to see if the zip file is there and it is there but when i try to load the custom rom it says the zip file is (bad) and installation aborted i don't know what to do next
Click to expand...
Click to collapse
how are u transferring them? should just copy n paste. do it from CWM (9. ad recovery). go under "mounts and storage". then go down to "mount usb storage" n wait for PC to recognize it. then copy... paste. should work. for additional help youll need explain your whole flashing procedure from task 29 to rom installation. hope this helps
MEG4LOM4NI4C said:
how are u transferring them? should just copy n paste. do it from CWM (9. ad recovery). go under "mounts and storage". then go down to "mount usb storage" n wait for PC to recognize it. then copy... paste. should work. for additional help youll need explain your whole flashing procedure from task 29 to rom installation. hope this helps
Click to expand...
Click to collapse
from magldr i go to (4.usb mass storage) and then when it connects i drag the zip file onto my sd card folder and then it would show that its copying but i after a few minutes it would tell me that it no longer on my computer. im trying to NAND flash my phone and was trying to put hyperdroid but i could not get past the part where i have to put the rom on my sd card oh and every time my sd card folder opens i get this pop up saying "PLEASE INSERT THE LAST DIK OF THE MULTI-VOLUME SET AND CLICK OK TO CONTINUE" and it say on top compressed (zipped) folders
iluuvmochi said:
from magldr i go to (4.usb mass storage) and then when it connects i drag the zip file onto my sd card folder and then it would show that its copying but i after a few minutes it would tell me that it no longer on my computer. im trying to NAND flash my phone and was trying to put hyperdroid but i could not get past the part where i have to put the rom on my sd card oh and every time my sd card folder opens i get this pop up saying "PLEASE INSERT THE LAST DIK OF THE MULTI-VOLUME SET AND CLICK OK TO CONTINUE" and it say on top compressed (zipped) folders
Click to expand...
Click to collapse
so your not using Clockworkmod Recovery then? just flashing directll to NAND?
---------- Post added at 02:16 AM ---------- Previous post was at 01:59 AM ----------
Most newer roms are compatible only with Clockworkmod Recovery (aka CWM or CWR). u must install this after maglr.
Just went over to the OP for hyperdroid v 3.0.1. thats why in the file u downloaded says: Hyperdroid-CWM-v3.0.0-MAGLDR-CWM-ZIP.
*note the bolded abbreviations... means u need Clockworkmod Recovery for this rom to work... not hard just an extra step that i highly recommend
There are roms that dont require this and a few ways around it as well but its easier to just install CWM. like i mentioned before seems most (all the ones ive used in the past ten months) roms are going this route for CWMods added features and benefits
Heres a little guide i cooked up bout an hour ago in another thread to help
I just posted this in another thread to clear some things up for some guys shortly after my first reply to you....guess ya inspired me in a way, hahaha. you might be more concered with steps 5 through 6 seeing as how you already have MAGLDR installed...... hope this clears up the process for you a bit
............................excerpted from previous post........................................
********BTW i have attached a little template that i use when flashing various roms and storing them on my PC. has task29, HSPL & MAGLDR already in it. all u need to do is go to the xda hd2 master radio thread to grab your appropriate radio and put that into the empty radio file. then find the rom you want to test out and usually the developer will have both rom (obviously) and the appropriate CWM that u should use with it and just put those in their respective empty folders i have in the attached file. that way all the steps below will line up to the files i have attached
OH YEAH, FORGOT... THESE STEPS ARE TO BE DONE AFTER THE INITIAL PREREQUISITES i.e. windows mobile device center, activesync, proper spl version...blah blah blah
--------the following steps 1 - 4 are to be preformed while at the tri-color boot screen (easiest way to reach is to turn off your phone while its connected to your PC then immediately hold volume down button till you see it n wait for it to say usb in the white section).
(by the way your device will ALWAYS automatically restart itself after a couple seconds if it is shut down while plugged in via USB to either a wall/car charger or hooked up to a PC this is normal and a small hiccup either due to the use of magldr or the hspl but dont worry)...cant quite remember
1. run task 29
-double click the only icon in file if your using the one provided by doloop
-wait for it to run and do its thing. when its finished it will automatically turn off your device so be sure to hold down the volume key as soon as it does.
2. install radio
-run the "customRUU" file with the HD2 icon in the radio of your choosing
-it will operate in a similar fashion as the task 29, automatically turning off device upon completion.... down on the vol key
3. install hspl3/hspl4
-run the "HSPL3_PKG/HSPL4_PKG" file. should be the only one in there
-make sure you select 2.08.HSPL in the setup and it will execute itself just like the installers in the previous two steps n turn off your phone... down vol key
4. install magldr113
-make sure your selecting "rom update utility" in the magldr113 file. dont run the "DAF" it wont work properly if you do and youll get errors
-BUT THIS TIME AS IT TURNS ITSELF OFF HOLD DOWN THE POWER BUTTON ON YOUR DEVICE AS IT BOOTS UP UNTIL U GET TO MAGLDR AND CONTINUE TO HOLD IT DOWN UNTIL YOU SEE ABOUT 12 DIFFERENT OPTIONS...
5. install CWM recovery
-go to option 5 "USB Flasher" and hit the green call key. wait a few moments till it shows USB....USB make sure the second usb pops up and your PC recognizes the connection. then when it does sync you get to......
-while still in the usb flasher mode above, simply run you desired CWM recovery which should the one your developer recommends for the builds as the requirements tend to vary from rom to rom.
-this is achieved by selecting the "DAF" file from the clockworkmod recovery your using
-and again this installer will shut off your device upon completion and HOLD DOWN THE POWER KEY LIKE ABOVE TILL YOUR BACK AT THE MAGLDR MAIN MENU (with options 1-12).
6. install rom
-go to option 8 "AD Recovery" and hit the green call button to enter into the CWM recovery u just installed
-after it loads up (GO!GO!GO!) go down to the "mounts and storage" option that is third from the bottom and hit the call key.
-once there go to the last option "mount USB storage" and hit the call key.
-give your PC a few moments to recognize the sd card for your device and choose to open it when your PC prompts with the regular file explorer or just find it and double click on the newly recognized drive (sdcard) if your PC doesnt auto prompt you.
-the new drive (sdcard) should be empty (depending...) then just find the desired rom you chose to use, right click on it and copy.....then over to the new drive (sdcard) and paste. might take a min or two depending on the roms size
-once the copying is complete hit the call button to "unmount" your sdcard then the back button on your device till your back at the CWM main screen
-go to the fifth option down and "install zip from sdcard" and hit the call button
-select the second option "choose zip from sdcard" and select the zip file you just copied to your sdcard. then it will begin to install the rom and all rom install times vary by build. some take a minute, some seem like they take forever.
-once installation is complete hit the back button till your back at CWM main screen and choose the last option which is to "power off"
-then tap the power button(if u unplugged it from usb otherwise it wil reboot by itself) to turn on your device and give it some time for the initial boot and load as it has to set up everything u just installed. subsequent boot wont take as long but again it can all vary from rom to rom.
-after initial load and a successful bootup you should arrive at ether the lockscreen or a startup screen. give the rom a few more mins to settle and dont hit any buttons. then unlock the device or skip through the startup options and get to the home screen. maybe give it another min to settle the launcher and the last bit of data and resist the urge to mess with the features. your gonna hate this but hold down the power button and select power off device from the popup menu. i know it sucks but it is best practice when flashing roms. after device shuts off wait a few seconds and turn it back on and let it reboot. should be faster this time and when u get to your lockscreen simply give it a few seconds to settle again, unlock and go to main launcher a wait a couple more seconds for it to finish settling and.....have fun! (every time i restart my device for any reason i will always give it a few moments to finish loading up before just blazing away with the apps)
WOW! maybe its not so abridged after all, but oh well tried my best to be as clear as possible so people can utilize their HD2 to its fullest potential.
HOPE THIS HELPS AND PLEASE HIT THE THANKS BUTTON IF IT HAS
Hello meg4lom4ni4c! you are awesome! thank you so much for helping me and it feels good to know that even though im a noob i still inspire people ahahaha
i was having problems connecting to my pc before but for some reason when i tried it again using the usb port tat the back of my pc it connected and and i put CWM and did what you said to put the zip file on CWM (mounts and storage) and copy and pasted the file and it worked! yey! now the only thing is when i go to market it always forecloses and i don't know what to do to fix it. when i go to market there would be a yellow box on top saying that "this application is not compatible with your phone" and it always forecloses. was wondering if i need task 29 and and radio if i want to change roms and to start it, would i go to the tri color screen and run task 29?
Starting HD2 ANDROID SO FRESH N SO CLEAN!
iluuvmochi said:
Hello meg4lom4ni4c! you are awesome! thank you so much for helping me and it feels good to know that even though im a noob i still inspire people ahahaha
i was having problems connecting to my pc before but for some reason when i tried it again using the usb port tat the back of my pc it connected and and i put CWM and did what you said to put the zip file on CWM (mounts and storage) and copy and pasted the file and it worked! yey! now the only thing is when i go to market it always forecloses and i don't know what to do to fix it. when i go to market there would be a yellow box on top saying that "this application is not compatible with your phone" and it always forecloses. was wondering if i need task 29 and and radio if i want to change roms and to start it, would i go to the tri color screen and run task 29?
Click to expand...
Click to collapse
well what the task29 does is pretty much whipe your whole devices NAND (internal) memory. it wont wipe your radio or the HSPL. it takes care of wiping the rest of the space (MAGLDR and CWM).
so your options are as follows:
-try fix permissions trough CWM
-wiping davlik cache (helps clean up issues with apps n such possibly your market situation, but this could be largely due to the type of rom your using as well as none are perfect...some are really close)
or start fresh to minimize chances for errors and force closes
do this by restarting your device into CWM
-in CWM execute the following commands in the following order (this is a little overkill but better safe than sorry i suppose).
at main CWM screen
-wipe data/factory reset
-wipe cache partition
then at main CWM screen go under "mounts and storage"
-format /boot
-format /cache
-format /data
-format /sdcard
-format /system
-format /sd-ext (only if u made one)
then back at main CWM go under "advance"
-wipe davlik cache
-can also find fix permissions here if needed i personally havent used this much(but maybe i should be every once n awhile...might be good practice)
at this point your ready to start at step one in my guide two posts up....run task29 at tri-color boot screen and so on and so on
*********Please note that the use of CWM is essential for most current builds that utilize a rom-zip format. not sure about sd card builds as i havent used them. i came into the hd2 flashing game right when they got it to run solely out of NAND. just seemed like a better way to do it to me but i could be wrong
hope this helps and lemme know if everything worked out for you. also include the rom you are attempting to install for further assistance. and also corrections are always welcome as i am definitely no developer just have a knack for nerdy stuff (sometimes)
Hi!
so i was reading your post very carefully coz i don't wanna mess up and panick and mess up even more LOL im just gonna go ahead and do cwm wipe and format first but how do i go to cwm screen from my phone and do i have to be connected to my pc?
i downloaded task29 the repack by shadrac one but could not decide which radio to get..any advice? and as for the rom i really don't know what rom im gonna get because i just started flashing my phone but if you have any suggestions i would very much like to hear it the rom im using right now is "Hyperdroid-CM7-v2.1.0-HeadyHoneyBadger" and it works good except the market, it just keeps foreclosing i really like cyanogenmod but i think there is a lot of different kinds so i really don't know which one is good.
Thank you so much for taking the time to help me YOU are really AWESOME!!!
iluuvmochi said:
Hi!
so i was reading your post very carefully coz i don't wanna mess up and panick and mess up even more LOL im just gonna go ahead and do cwm wipe and format first but how do i go to cwm screen from my phone and do i have to be connected to my pc?
i downloaded task29 the repack by shadrac one but could not decide which radio to get..any advice? and as for the rom i really don't know what rom im gonna get because i just started flashing my phone but if you have any suggestions i would very much like to hear it the rom im using right now is "Hyperdroid-CM7-v2.1.0-HeadyHoneyBadger" and it works good except the market, it just keeps foreclosing i really like cyanogenmod but i think there is a lot of different kinds so i really don't know which one is good.
Thank you so much for taking the time to help me YOU are really AWESOME!!!
Click to expand...
Click to collapse
Hmmmm where to start....
You were in CWM when u copied the rom to the phone... remember? to get there turn off device then restart it while holding down the power button to get you to MAGLDR. Option 9. AD Recovery = ClockworkMod Recovery (aka CWM or CWR) in there is where u use my little wipe/fresh install guide
The version of Hyperdroid your using is from a months ago. Pongster has released v.3.0.0 "the insightful impala" with a hotfix to version 3.0.1. I would recommend using that as most of your market issues will be addressed i would imagine.
i attatched a file in my previous post... download it. it comes with the task29(provided by doloop), HSPL3, and MAGLDR113 that i use. the lil guide i posted follows how i have the files in the "HD2 rom template" arranged. if you unzip the attached file (use 7zip,winrar....etc) youll see files labeled 1-6 (1.task29 2.radio 3.HSPL 4.MAGLDR 5.CWM 6.ROM). the radio file is empty because i was unable to compress it enough to include it( there is a 8mb attachment limit ) The CWM file and rom file are blank as well because both will vary from build to build.
if u use my attachment as a kind of template it will make the steps easier to go thru thats why they are numbered
to get the appropriate radio on xda type a search for "radio master thread" and open the post. there you will see a bunch of different radios. BE CAREFUL SOME MIGHT BRICK YOUR DEVICE!!! read the post it explains which ones not to use i believe. the one i use and have noticed a lot of others use is 2.15.50.14.... has always worked for me. download it and put it in the empty radio file in my template.
now go back to Pongsters hyperdroid cm7 OP and download both the version 3.0.0 and also download the v3.0.1 hotfix and put both of the zip files in the empty rom folder.
in Pongsters second post he has the CWM for you that youll need if you already dont have it (its on step three of his little guide on his second post) download and put that in the empty CWM file in the template.
now that you have all the files you need and in a nice tidy order.... reflash time!!!!
follow my "fresh install/wipe/format procedure" in my previous post then use my install guide post afew posts up and follow it using the lil template i provided and that u put the radio,CWM,rom & hotfix into
notice how the 1-6 steps in my install guide follow the 1-6 on my "HD2 rom template" attachment?
******oh yeah when u get to the installing the rom step only install the v3.0.0 zip via CWM first and follow the recommended new rom startup section at the end of my lil guide. make sure the rom has had plenty of time to settle and everything like it says n go ahead and play around with it a little and try it out. but then after u rebooted it a couple times like it says reboot it a third time into CWM and go to the install zip from sdcard option and go in and install the hotfix(sorry i tend to repeat myself sometimes)
lemme know how it goes and have u tride Tyweens rom??? Its pretty good itself in case your not crazy about the Hyperdroids' minimalistic and monocrome look. Both are great though.....
---------- Post added at 01:36 PM ---------- Previous post was at 01:31 PM ----------
oh yeah go to www.android.hd2roms.com for a site i use that someone made that kinda keeps track of most of the HD2 roms floating around on xda. its pretty acurate and gets updated constantly. help u see most of the flavors of android on the HD2.
YEY!
YEEEEEEEEY! IT WORKED! you are AWESOME! thank you so so so so so much! if it wasn't for your guidance i wouldn't be able to understand it! i did all the stuff you told me and it worked! i didn't have any problems while flashing my phone! did i say thank you already? THANK YOU!!!!!
and thank you for all the links that you suggested it was really helpful! thank you thank you thank you!!
Hi guys, this is the first post i upload and want to take the occasion to greet you all.
In these days i bought a Samsung Infuse 4G...i really like this phone but want to be able to use it with some special features such as connecting various USB devices to the phone and other juicy stuff.
I read that the builtin ROM is not capable of such this thing, and Ice Cream Sandwitch, witch should allow to do that, is not available for this smartphone model. At least not officially.
My choice fell upon CM7 LinuxBozo ROM ( http://forum.xda-developers.com/showthread.php?t=1311960 ).
I rooted my device. I'm sure of that because i am able to use the root explorer with root privileges and the root menu shows up among my applications.
I then followed the instructions here ( http://forum.xda-developers.com/showthread.php?t=1107881 ) in order to install the ClockWorkMod Flashing Menu but I am not sure whether anything went allright or not as, after trying both the methods shown on the guide, nothing happened (in the first case, the automatic install through ROM Manager seems to work, a message appears on the screen confirming anything went smooth but when i reboot i see the normal reboot menu, no advanced menu nor CWM menu; in the second case i tried to manually load the CWM menu by placing the update file in the SD and renaming it to update.zip, the update gets stuck somewhere saying something about a bad or wrong signature, tried it a few times and with different CWM update versions but nothing to do).
I then stumbled into a workaround to fix that issue by an even more manual procedure ( http://www.youtube.com/watch?v=PkMo8rBehHg&feature=related ) basically consisting in copying the "recovery" executable from the CWM update archive to the directory /system/bin and of course chmodding it to rwxr-xr-x and chowning it to the root.
Now the CWM screen appears but, as i attempt to flash the CM7 ROM, the flashing gets stuck at "Finding update package". I read here ( http://forum.xda-developers.com/showthread.php?t=821499 ) that it could happen sometimes and it's just a matter of trying and trying again... I tried at least ten times up to now but it keeps getting stuck...maybe it's not my case.
Hope someone will help me out...i really need that USB reading feature. Thank you.
baareem said:
Hi guys, this is the first post i upload and want to take the occasion to greet you all.
In these days i bought a Samsung Infuse 4G...i really like this phone but want to be able to use it with some special features such as connecting various USB devices to the phone and other juicy stuff.
I read that the builtin ROM is not capable of such this thing, and Ice Cream Sandwitch, witch should allow to do that, is not available for this smartphone model. At least not officially.
My choice fell upon CM7 LinuxBozo ROM ( http://forum.xda-developers.com/showthread.php?t=1311960 ).
I rooted my device. I'm sure of that because i am able to use the root explorer with root privileges and the root menu shows up among my applications.
I then followed the instructions here ( http://forum.xda-developers.com/showthread.php?t=1107881 ) in order to install the ClockWorkMod Flashing Menu but I am not sure whether anything went allright or not as, after trying both the methods shown on the guide, nothing happened (in the first case, the automatic install through ROM Manager seems to work, a message appears on the screen confirming anything went smooth but when i reboot i see the normal reboot menu, no advanced menu nor CWM menu; in the second case i tried to manually load the CWM menu by placing the update file in the SD and renaming it to update.zip, the update gets stuck somewhere saying something about a bad or wrong signature, tried it a few times and with different CWM update versions but nothing to do).
I then stumbled into a workaround to fix that issue by an even more manual procedure ( http://www.youtube.com/watch?v=PkMo8rBehHg&feature=related ) basically consisting in copying the "recovery" executable from the CWM update archive to the directory /system/bin and of course chmodding it to rwxr-xr-x and chowning it to the root.
Now the CWM screen appears but, as i attempt to flash the CM7 ROM, the flashing gets stuck at "Finding update package". I read here ( http://forum.xda-developers.com/showthread.php?t=821499 ) that it could happen sometimes and it's just a matter of trying and trying again... I tried at least ten times up to now but it keeps getting stuck...maybe it's not my case.
Hope someone will help me out...i really need that USB reading feature. Thank you.
Click to expand...
Click to collapse
what color is your cwm screen?
this may be a simpler way of gettin cwm:
http://forum.xda-developers.com/showthread.php?t=1220090
specifically, the CWM instructions set.
I see that the instructions you suggested me would mean to start the process almost from scratch. I will do that as soon as i finish studying the nazis for my school report .
And maybe after getting the next answer from you
The boot screen is green text on black backgroud.
Holding audio and power buttons for 10 seconds doesn't prompt me to the red boot screen if it was what you meant and if I read the instructions provided well (witch i didn't as i have no time now)... don't get me wrong. Just trying to provide you as more information as possible.
baareem said:
I see that the instructions you suggested me would mean to start the process almost from scratch. I will do that as soon as i finish studying the nazis for my school report .
And maybe after getting the next answer from you
The boot screen is green text on black backgroud.
Holding audio and power buttons for 10 seconds doesn't prompt me to the red boot screen if it was what you meant and if I read the instructions provided well (witch i didn't as i have no time now)... don't get me wrong. Just trying to provide you as more information as possible.
Click to expand...
Click to collapse
if you still have root, download from market
sgs kernel flasher and the flash the gingerbread kernel to give you RED recovery and flash the rom of your choice after a factory reset and usual wipes
Cool... i'm now running CM7 !
Here is what i missed for anyone who would have the same problem in the future (you can find the download links here: http://forum.xda-developers.com/showthread.php?t=1220090 ):
CWM Installation Instructions:
1) You must be rooted.
2) If you have a /Voodoo folder on your internal SD card, delete it and reboot.
3) If you're already running a custom ROM with Voodoo lagfix FULLY enabled, you can skip to step 7.
4) Download CWM-community-kernel-v8.zip if you're on Froyo or CWM-infused-v2.0.1-kernel.zip if you're on Gingerbread and place it on your internal SD card.
5) Install SGS Kernel Flasher from the Market.
6) Open SGS Kernel Flasher, select choose kernel, select the file you downloaded, and select flash kernel. Your phone will reboot and begin to enable Voodoo lagfix. Let it do that and boot all the way up. It will take a while (5-10 minutes) because it's converting all partitions to ext4.
7) Download update-infused-v2.X.X-full.zip and place it on your internal SD card.
8) Power off your phone.
9) With the phone powered off, hold both volume keys and the power button for about 10 seconds and then release. This should boot you into RED CWM.
10) Select "install zip from sdcard" and select update-infused-v2.X.X-full.zip.
11) Once that finishes, select "wipe data/factory reset".
12) Select "reboot system now".
13) Do NOT restore system data with Titanium Backup. Do NOT restore ALL apps with data. If you absolutely must restore something with Titanium Backup, only restore MISSING apps with data.
Click to expand...
Click to collapse
Now just another question: i noticed different errors when running the market and other old built-in apps... I just need to reinstall gapps right?
yeah, that is why it's stickeyed.
you just had to read/search them.
market wise, there's a market fix
or you can also factory reset and wipe cache and dalvik in cwm
Thanks. You helped me solving this and now anything works fine. Have a good day.
Thread (NOT) SOLVED.
--------
(Edited after realizing gapps still don't show up as installation didn't really worked)
baareem said:
Thanks. You helped me solving this and now anything works fine. Have a good day.
Thread SOLVED.
Click to expand...
Click to collapse
np. take it easy, bro.
I was too quick saying it worked.
The Infuse just booted up but nothing changed. I then tried to do the zip installing through rom manager again but invane.
When trying with the manual install it promts me with this error:
E: Can't open /emmc/gapps-gb-xxxxxxx-signed.zip
(bad)
Installation aborted.
Click to expand...
Click to collapse
I tried different versions of gapps including the one suggested in the CM wiki but with no luck. I guess the problem is somewhere else.
PS: now i see the blue on black bootscreen as in order to install gapps with rom manager i was asked to reinstall CWM trough it...
baareem said:
I was too quick saying it worked.
The Infuse just booted up but nothing changed. I then tried to do the zip installing through rom manager again but invane.
When trying with the manual install it promts me with this error:
I tried different versions of gapps including the one suggested in the CM wiki but with no luck. I guess the problem is somewhere else.
PS: now i see the blue on black bootscreen as in order to install gapps with rom manager i was asked to reinstall CWM trough it...
Click to expand...
Click to collapse
what version of ROM were you running when you tried this?
Stock FRoyo?
Cyanogenmod 7 ... exactly this version : http://forum.xda-developers.com/showthread.php?t=1311960
Kernel version is 2.6.35.7 , android v 2.3.7.
The old, OOB version i had was froyo 2.2.6 if i well remember.
baareem said:
Cyanogenmod 7 ... exactly this version : http://forum.xda-developers.com/showthread.php?t=1311960
Kernel version is 2.6.35.7 , android v 2.3.7.
The old, OOB version i had was froyo 2.2.6 if i well remember.
Click to expand...
Click to collapse
I haven't played with CM7, it's not an infuse based rom.
I recall some installation issues with it.
I remember an unsuccess reboot intially and pull battery thing..not sure.
If you're looking to install another rom, odin back to stock and start over.
check out my sig line for some useful links