Hi
I recently bought a Desire S from a friend. I went about rooting it but when I plugged it into my PC it is not recognised at all, literally nothing pops up on the phone or the PC.
I've checked the settings in the phone and USB debugging is enabled and I always changed default connection type.
I have even booted into Hboot and plugged the USB in, but still nothing.
The phone charges perfectly fine and I've tried plenty of different cables. My other Android phone works perfectly when plugged it.
I'm starting to think its a hardware issue, anyone else heard of this? common problem? any fixes?
Thanks
Re install htc sync and drivers, then remove sync and try again
“Pressure is something you feel when you don't know what the hell you're doing.”*―*Peyton Manning
I have the same problem, sort of. When I plug mine in all is well at first, but give the phone one tiny nudge (or just wait a few minutes) and it goes back to charge-only mode. It's probably a slightly loose connection somewhere in the USB port on your phone.
To be sure, try if it works in Linux. The Linux USB stack sucks infinitely less than what Windows uses.
Thanks for the replies. I tried Ubuntu but exactly the same (it worked with my Nexus 4)
Thats a little annoying, thankfully charging still works, just unsure how long that will last for! plus I cant root it! but I dont exactly need it rooted but I tend to do it anyway.
I've sorted it now. It was a loose ribbon cable, plugged that back in after taking the phone apart and its working.
Bootloader unlocked and custom recovery flashed. Ready to rock.
Related
Hello, I have a Samsung focus that use to work fibe connecting to PC but off recent whenever I plug it in windows 7 says USB is not recognize.
I've tried everything from resetting the phone to refatting the computer nothing helps. I have a feeling its the phone because same problem on other computers, anyone had to problem and cured it?
Wp7 Focus
or it might be a problem with your usb cable that came with the phone. if u can, try getting another one and using that (they go for very cheap on ebay). Have u *unlocked your device lately?
I've tried many different USB cables none works for me. I got the phone almost 2months now already unlocked. Live in UK and its a ATT branded phone so I'm abit screwed.
Wp7 Focus
jamreal said:
I've tried many different USB cables none works for me. I got the phone almost 2months now already unlocked. Live in UK and its a ATT branded phone so I'm abit screwed.
Wp7 Focus
Click to expand...
Click to collapse
Have you tried the microsoft answers forum (answers.microsoft.com)? They have some solution wizards in one of the stickies near the top.
Did anyone ever find an answer to this? I've had my focus since Nov last year and it's worked fine for me aside from some odd, and random nonsense.
I went to go connect my phone to my laptop the other day and realized it didn't see my phone. When I plug it in, the phone chimes and shows it's getting power, but both my laptops show nothing being installed, Zune doesn't load, and if I load it, shows nothing connected. Nothing appears in the device manager either. I get no error message.
the cord shows no damage, and it's been plugged into my wall outlet for awhile. I guess i'm going to see about getting another cable tomorrow and try it that way?
Was wondering if anyone else has had a problem with the cable going bad suddenly, or if something else could be to blame? I've been reading here, MS's site and anywhere else I can, and I find things ranging from error message, drivers not installing and other things. I just know it worked fine a few weeks ago, but now...nothing.
Had the same issue. My 4th USB cable did the trick. I wanted to throw it out the window
Sent from my SGH-i917 using XDA Windows Phone 7 App
I don't know much about electricity, but every device I can remember having with a removable charger: instructions said Plug power cord into Device FIRST, then Plug into Power Source. Could leaving cord plugged into power source, thus reversing above instruction, cause a problem with the cord?
Hi there,
My Nexus S (i9023) phone recently fell into a water bucket and I immediately pulled it out.
Not much damage was done to it except of one thing: after I put it in a bag of rice like stated on the internet for overnight, and then plugged it in again to the charger, it seems like something was different.
When I plug the phone to the AC power - phone DOES charge, but nothing else happens.
It doesn't turn on screen and informs "charging", and doesn't have the "charge when phone is off" option anymore. Instead it would just turn the phone on.
Also, when connecting the phone to the computer nothing happens, it's just charging the phone! can't mount USB anymore
I took the phone to a lab which handles these cases. They replaced the USB port and cleaned all the corrosion. They said it's fixed now, and indeed the USB port is new.
But then after coming back home it's still the same.
I'm sick of being dependant on other people and would like to fix it myself.
Any clue which part of my phone was fried? Where can I get it?
Thanks!
-zeek
Are u rooted?
Try a different ROM. Maybe one ur ur backups.
If it still does connect then it has to be the ROM assuming ur computer has the proper drivers still.
Good luck
Vs Nexus S 4G
Thanks!
Thank you!!!
Problem solved after I loaded one of my backups.
Any explanation to that? even when the phone was turned off it couldn't charge it in off mode and now it can.
How come it's a software issue?
Thanks!
I can only guess that ur ROMs kernel had a "fast charge" option. If so this doesn't allow computer connection. How it got switched to that option... who knows .... maybe the sudden power surge.
If not that, then ... strange things happen when a phone get wet.. the sudden power surge could have changed the power output causing CPU adjustments... who knows.
I'm just happy it worked for u.
I'd recalibrate ur battery asap.
Good luck
Vs Nexus S 4G
Hi, the same thing happened to me, only it wasn't a bucket, it was a pool, and changing the ROM didn't work (I've flashed at least three different ROMs since then, kind of hard when the USB port doesn't work but eh, what can you do).
Also, it's on a Gio, not a Nexus S, but the principle should still be the same, yes?
I'm currently on Beans 13 rom and noticed that I cannot connect my phone to my computer via usb, all it will do it charge, I will not get a notification to use usb mass storage or anything like that. I uninstalled the drivers, rebooted my computer and phone, installed the drivers again and still does not give me the usb notification.
I then remembered that I did a nandroid on Beans 12 so I loaded that up and tried connecting to my computer and had the same exact issue. I took my phone to my roommate's laptop who also has a verizon S3 and tried connecting to his laptop. Still just charges, no notification.
I connected his S3 using the same exact cord to my computer and my computer recognizes his phone (although he is 100% stock).
I decided to try and Odin back to 100% stock. I loaded up Odin on my computer (Win 7 Pro 64 bit) and rebooted my computer into the odin/download mode and my computer/odin didn't recognize my phone. At this point I am at a lost. I have a suspicion that maybe the usb port on my phone went bad but in order to replace it with Verizon, I need to odin back to stock. Any one have any ideas?
I apologize if this has been covered before, I used the search and didn't see anything relating this.
NITRO_2 said:
I'm currently on Beans 13 rom and noticed that I cannot connect my phone to my computer via usb, all it will do it charge, I will not get a notification to use usb mass storage or anything like that. I uninstalled the drivers, rebooted my computer and phone, installed the drivers again and still does not give me the usb notification.
I then remembered that I did a nandroid on Beans 12 so I loaded that up and tried connecting to my computer and had the same exact issue. I took my phone to my roommate's laptop who also has a verizon S3 and tried connecting to his laptop. Still just charges, no notification.
I connected his S3 using the same exact cord to my computer and my computer recognizes his phone (although he is 100% stock).
I decided to try and Odin back to 100% stock. I loaded up Odin on my computer (Win 7 Pro 64 bit) and rebooted my computer into the odin/download mode and my computer/odin didn't recognize my phone. At this point I am at a lost. I have a suspicion that maybe the usb port on my phone went bad but in order to replace it with Verizon, I need to odin back to stock. Any one have any ideas?
I apologize if this has been covered before, I used the search and didn't see anything relating this.
Click to expand...
Click to collapse
I'm having the exact same problem with my GS3. The problem started after I flashed Beans B13 as well. I directly downloaded MDOB (it's a stock rooted ROM) and flashed it, but I am still having the issue. I haven't been able to figure it out either. Hopefully someone on here can help us out!
Well I think I solved the problem - at least for me. I tried the USB cable from my Dad's Droid X. Plugged the phone into the computer and everything works. No errors and the drivers installed correctly. I tried the cable that came with my phone (the one I have always used and has worked up until now) and it doesn't work. I get the error with it, but as soon as I use the one from the DX again, it works! Not sure why that is but I would say give it a try for sure! Let me know if it works for you too!
By the way, I got the idea from this thread:
http://forum.xda-developers.com/showthread.php?t=1719539
Take a look if trying the new cable doesn't work!
DROIDLOVERX2 said:
Well I think I solved the problem - at least for me. I tried the USB cable from my Dad's Droid X. Plugged the phone into the computer and everything works. No errors and the drivers installed correctly. I tried the cable that came with my phone (the one I have always used and has worked up until now) and it doesn't work. I get the error with it, but as soon as I use the one from the DX again, it works! Not sure why that is but I would say give it a try for sure! Let me know if it works for you too!
By the way, I got the idea from this thread:
http://http://forum.xda-developers.com/showthread.php?t=1719539
Take a look if trying the new cable doesn't work!
Click to expand...
Click to collapse
Thanks for replying back! I meant to add a post. I got my phone working again. My roommate and I took apart the tip of my usb cable (the one that came with the phone) and noticed the green wire was broken off, so we soldered it back on and my phone was able to connect to my computer finally. Although it wasn't a strong connection and kept disconnecting.
For now I'm using a different cable from my hp touchpad and it's working perfectly fine so everything is all good now
Sent from my SCH-I535 using Tapatalk 2
NITRO_2 said:
Thanks for replying back! I meant to add a post. I got my phone working again. My roommate and I took apart the tip of my usb cable (the one that came with the phone) and noticed the green wire was broken off, so we soldered it back on and my phone was able to connect to my computer finally. Although it wasn't a strong connection and kept disconnecting.
For now I'm using a different cable from my hp touchpad and it's working perfectly fine so everything is all good now
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
That's good to hear! I guess both of our cables just went bad from use or something. Wish I would have tried another cable sooner instead of spending 4 hours installing and uninstalling drivers and wiping and installing ROMs over and over trying to solve the issue! :silly: But good thing we both figured it out! :victory:
I'm having the same problem as well...have now tried 4 different cables, hard reset, and every USB port on my machine and my buddy's computer to no avail. I verified the cables were 'good' on my buddy's gf's gs3 and it worked fine...just wont see mine. Charges just fine just no go on getting any data pass through it seems???
So recently I started having this problem. My Nexus 5 stopped charging all of a sudden.
After messing around I found out that I could charge the phone when it is turned off, but when I boot it (while connected) it doesn't show the charging icon. Only when looking up the battery status at the setting menu it says charging.
To my surprise fastboot was still working (adb wasnt) what brought me to think it's not the hardware.
So far I have done a factory reset, wiped everything, installed stock kernel and recovery, downgraded to stock 5.0 (I don't even know why, just thought its worth a shot...).
At some point I took the phone apart to try to determine whether I tore out the connector itself, and noticed nothing.
I'm really running out of ideas here... I can live with having to reboot the phone for charging, but I really need it to connect to the computer.
Any help will be appreciated!
You tried different USB cables and chargers? USB debugging enabled? Computer is a trusted machine in adb?
I have 2 computers on which adb is trusted. Both stopped working. I tried a few cables, all of them worked with another phone, but did not with mine.
Adb is enabled. :/
Did you try revoking all computers and re-establishing trust after flashing a stock ROM?
Strange that fastboot commands work and adb doesn't.
Nope, but I tried connecting to another one and no dialog popped up.
Btw, an hour ago it just started working... All of a sudden...
I should be happy, but now I have no chance in finding what was the problem.
Anyways thank you for now, if I have any more issues I'll update.
I assume it's physical damage to the usb board/module (since it started working while no change to the software was done in the past few days).
I will order a new one just in case.
Thank you again guys!
Maybe a loose internal connection? You could try removing the back to looking for loose connections.
Did so, didn't notice anything strange.
I do have experience with soldering, but I would rather not touch it before I get a new one, just in case I screw up. Small components are no fun.
The thing that still bugs me though is I had fastboot working perfectly fine all that time. Oh well
Hello,
I've posted this a few days ago in htc one thread, but got no answers, so I thought maybe this is no phone-specific problem and i need a larger group of counselors
My phone (HTC one m9) will only charge or connect to pc _once_ per reboot (power on, plug usb in - everything ok, charging and connection to pc. plug out, plug in again - nothing. No charge, no connection, until reboot)
Currently i'm s-off, rooted, newest htc rom, nougat. But the problem started when i was s-on on cyanogenmod, marshmallow, so...i don't know. Cleaned the usb port. Used some battery-calibration app from play market. No idea, please help.
I don't think it's hardware-related since it works one time, but how can it be software related when i'm on a new rom? Any weird app? Dunno, i'd say my apps are pretty standard. Xposed doesn't work on nougat, so nothing to do with that.
can be set as resolved. I've exchanged the usb flex (and the sdcard-flex after ripping some bloody wires...), and it works again. Seems like it was some sort of loose contact.