[Q] help button-backlight - HTC Sensation

in a few days ago, i flash a rom. but later the button backlight can not turn on and the light sensor proximity sensor can't use sometimes...idon;t think it is a hardware issue coz it sometimes good ..anyone can help me? is flash kernel coursethis? many thanks

1aaa said:
in a few days ago, i flash a rom. but later the button backlight can not turn on and the light sensor proximity sensor can't use sometimes...idon;t think it is a hardware issue coz it sometimes good ..anyone can help me? many thanks
Click to expand...
Click to collapse
change kernel or reflash your rom

rzr86 said:
change kernel or reflash your rom
Click to expand...
Click to collapse
it is no use,coz i flash other roms ,it is the same sometimes good

egroudi
rzr86 said:
change kernel or reflash your rom
Click to expand...
Click to collapse
is flash kernel course this issue? i remember i flash another kernel then it happened

1aaa said:
is flash kernel course this issue? i remember i flash another kernel then it happened
Click to expand...
Click to collapse
try then different kernels and see if the issue persists

Related

Help with WIFI fix- Ayone

Hi
i dont know if anyone out there can help fix a wifi issue on the rom below
http://forum.xda-developers.com/showthread.php?t=1943745
What is your issue?
Try flashing a custom kernel, like Matr1x kernel.
jacob66 said:
What is your issue?
Try flashing a custom kernel, like Matr1x kernel.
Click to expand...
Click to collapse
WIFI wont turn on
thats just the thing i dont know what it is, everything on the rom works except the WIFI, it was ported by glaxyuser, we tried different kernels and still no joy

Help for wifi fix!!!!!

When i flash the sweep to wake kernel and flash the boot.img from the kernel, boot up is working fine , sweep to wake is working as well, but i will
lost my WIFI state, reboot also same,try fastboot the boot.img also same
only when i flash back the rom boot.img only unable to use wifi
but after that i will lost my sweep to wake
Please assist me, i really wan sweep to wake and Wifi work!!!!!! Any wifi fix after flash s2w kernel?
i remember Killx Kernel have killx.img but now files is not available any more need help
Device :X920D
Information
Flash this kernel: 4.4.2-dlxub1-prod-bld1.zip
S-ON
hboot 1.55
FxJohnnyEng said:
When i flash the sweep to wake kernel and flash the boot.img from the kernel, boot up is working fine , sweep to wake is working as well, but i will
lost my WIFI state, reboot also same,try fastboot the boot.img also same
only when i flash back the rom boot.img only unable to use wifi
but after that i will lost my sweep to wake
Please assist me, i really wan sweep to wake and Wifi work!!!!!! Any wifi fix after flash s2w kernel?
i remember Killx Kernel have killx.img but now files is not available any more need help
Device :X920D
Information
Flash this kernel: 4.4.2-dlxub1-prod-bld1.zip
S-ON
hboot 1.55
Click to expand...
Click to collapse
Please don't spam the forums. With the problems you've faced, only kernel developer could help you.
1. If you want wifi and s2w, wait for Boa to post the new v2.1 rom. Boa included s2w to the kernel.
2. Killx have left the butterfly forum. So no more killx.img (Unless he decide to comeback)
3. From the posts you did, i don't really know which device you own. x920D? x920E? They looked the same but the software part are different. Trying to flash something not meant for your device may cause your device to bootloop, lost some function(wifi etc) or worse case scenario brick. So anything not meant for your device USE AT YOUR OWN RISK
Hope this give you some knowledge
xunus said:
Please don't spam the forums. With the problems you've faced, only kernel developer could help you.
1. If you want wifi and s2w, wait for Boa to post the new v2.1 rom. Boa included s2w to the kernel.
2. Killx have left the butterfly forum. So no more killx.img (Unless he decide to comeback)
3. From the posts you did, i don't really know which device you own. x920D? x920E? They looked the same but the software part are different. Trying to flash something not meant for your device may cause your device to bootloop, lost some function(wifi etc) or worse case scenario brick. So anything not meant for your device USE AT YOUR OWN RISK
Hope this give you some knowledge
Click to expand...
Click to collapse
So what kernel are u using? I have two device one my bro one mine, me is X920e, my bro flash kernel for S2W, and lost wifi, so i asking
FxJohnnyEng said:
So what kernel are u using? I have two device one my bro one mine, me is X920e, my bro flash kernel for S2W, and lost wifi, so i asking
Click to expand...
Click to collapse
I'm using BOA4.4.2-S2W-V1 kernel. Unfortunately, most of the Roms and kernels here are for the x920d model. Support for the x920e model is very low. I would say rare. Since you are S-ON, you have to flash the kernel through recovery then you fastboot flash boot boot.img. I have not been through the S-ON method because i am S-OFF. If this was the method you did then i don't really know what's wrong. Maybe do a clean install? Both rom and kernel.
xunus said:
I'm using BOA4.4.2-S2W-V1 kernel. Unfortunately, most of the Roms and kernels here are for the x920d model. Support for the x920e model is very low. I would say rare. Since you are S-ON, you have to flash the kernel through recovery then you fastboot flash boot boot.img. I have not been through the S-ON method because i am S-OFF. If this was the method you did then i don't really know what's wrong. Maybe do a clean install? Both rom and kernel.
Click to expand...
Click to collapse
Downlaod link for BOA4.4.2-S2W-V1 kernel??
yes i know X920e is rare, but i my bro x920d got problem now hehe, kindly help me. thanks
FxJohnnyEng said:
Downlaod link for BOA4.4.2-S2W-V1 kernel??
yes i know X920e is rare, but i my bro x920d got problem now hehe, kindly help me. thanks
Click to expand...
Click to collapse
Here: https://docs.google.com/uc?authuser=0&id=0B2K1UTjI1EcFMFFKZVcyb2E2Ykk&export=download
xunus said:
Here: https://docs.google.com/uc?authuser=0&id=0B2K1UTjI1EcFMFFKZVcyb2E2Ykk&export=download
Click to expand...
Click to collapse
is working heheheh, thanksss

[Q] Question about Vengeance Kernel

Now Id be posting in teh Vengeance kernel thread, but that requires me to have 10 posts. I don't. Now, after flashing Shivang Dave's Vengeance Reloaded my baseband became like this "7x25A_M:ERROR_A:ERROR". Will that cause any problems? Other than that the phone works very well overclocked to 1.3 GHz.
So my next question is about Pure Performances X and Pure Audio 2. One of them causes my phone to turn off at 10% battery, and as a whole show the wrong percentages. Anyone knows such a problem?
Turbolqk said:
Now Id be posting in teh Vengeance kernel thread, but that requires me to have 10 posts. I don't. Now, after flashing Shivang Dave's Vengeance Reloaded my baseband became like this "7x25A_M:ERROR_A:ERROR". Will that cause any problems? Other than that the phone works very well overclocked to 1.3 GHz.
So my next question is about Pure Performances X and Pure Audio 2. One of them causes my phone to turn off at 10% battery, and as a whole show the wrong percentages. Anyone knows such a problem?
Click to expand...
Click to collapse
First try reflashing your baseband. if it s working properly there might not be anything wron with it . but just reflash it to be safe
I have used pure audio so i m not sure but i ve been using pure performance and my phone is working perfectly. did u turn on any power savers
flash baseband and that will go away... it will mot create any issues...
i think baseband 7x25A_M:ERROR_A:ERROR is not a problem, but the problem is in my miro, i got FC when open contact and then when i open it again all my contact is gone,
Governors : OndemandX
IO Shedulers : sio
Frequencies: 245 Mhz - 1.008 Ghz
is anyone have same problem
I used Flashtool, excluded anything but baseband and flashed, yet the issue did not go away! :/
As for the pure performance, ill flash them one by one to see in which one the problem is.
Reisen23 said:
i think baseband 7x25A_M:ERROR_A:ERROR is not a problem, but the problem is in my miro, i got FC when open contact and then when i open it again all my contact is gone,
Governors : OndemandX
IO Shedulers : sio
Frequencies: 245 Mhz - 1.008 Ghz
is anyone have same problem
Click to expand...
Click to collapse
Turbolqk said:
I used Flashtool, excluded anything but baseband and flashed, yet the issue did not go away! :/
As for the pure performance, ill flash them one by one to see in which one the problem is.
Click to expand...
Click to collapse
FC isn't related to baseband.. and flashing baseband should make that go away
ShivangDave said:
FC isn't related to baseband.. and flashing baseband should make that go away
Click to expand...
Click to collapse
sorry, what i mean is there something wrong with my setting, that make make my contact FC and sometime my miro is little lag
it happen when i use Vengeace kernel more than 1 month. before that, there nothing problem like this
Reisen23 said:
sorry, what i mean is there something wrong with my setting, that make make my contact FC and sometime my miro is little lag
it happen when i use Vengeace kernel more than 1 month. before that, there nothing problem like this
Click to expand...
Click to collapse
Try clearing your cache.. if doesn't work, try reflashing firmware...
ShivangDave said:
FC isn't related to baseband.. and flashing baseband should make that go away
Click to expand...
Click to collapse
ShivangDave said:
Try clearing your cache.. if doesn't work, try reflashing firmware...
Click to expand...
Click to collapse
ok i'll try
ShivangDave said:
FC isn't related to baseband.. and flashing baseband should make that go away
Click to expand...
Click to collapse
When I flash your kernel I see change in the signal strength. While It's full at the moment, with the Error baseband the signal gets twice as weak.
So I start up flashtool, connect the phone, choose the firmware for the phone and choose to flash only the baseband. The problem still persists,
however. I mean, are there any other files I should copy before flashing the new kernel and pasting them in the phone later?

[Q] flashing Ak kernel

Hi there,
i would love to try the AK kernel but the problem is it requires installation of a stock cm kernel first.
Currently im on PA so the stock kernel i have to flash is CM11. I jsut cant find the link to download the stock cm11 but i did find cm11s stock kernel. Any help?
Can i just extract boot.img from cm11 rom and flash it right away via fastboot?
vesparados150 said:
Can i just extract boot.img from cm11 rom and flash it right away via fastboot?
Click to expand...
Click to collapse
Yes, that's how I did it.
Edit: I meant, just fastboot AK kernel boot.img from the zip file.
You don't necessarily need to flash stock kernel. Just flash the kernel.
Sent from my One A0001 using Tapatalk
vesparados150 said:
Can i just extract boot.img from cm11 rom and flash it right away via fastboot?
Click to expand...
Click to collapse
you are also making way more difficult than it has to be. you can simply reflash rom then kernel if you want to do it that way but its not needed
Gamm86 said:
Yes, that's how I did it.
Edit: I meant, just fastboot AK kernel boot.img from the zip file.
Click to expand...
Click to collapse
zephiK said:
You don't necessarily need to flash stock kernel. Just flash the kernel.
Sent from my One A0001 using Tapatalk
Click to expand...
Click to collapse
playya said:
you are also making way more difficult than it has to be. you can simply reflash rom then kernel if you want to do it that way but its not needed
Click to expand...
Click to collapse
Thanks for the reply guys..so this means that i can just falsh the kernel straight right?i flashed it and i notice severe graphical glitches using with PA. A search suggested to turn off hardware overlay. um...
vesparados150 said:
Thanks for the reply guys..so this means that i can just falsh the kernel straight right?i flashed it and i notice severe graphical glitches using with PA. A search suggested to turn off hardware overlay. um...
Click to expand...
Click to collapse
Update your PA ROM and then it should be fine.

What should I be aware of after flashing a Kernel?

I've been researching about this for 30 minutes and still couldn't find anything that answered my question, I apologize in advance if the answers are obvious.
So the question is as the title states, what should I be aware of after flashing a Kernel on CM12.1? Will I have any issues when updating to another nightly? Or when flashing a stock-ROM ? Thanks in advance!
if you update your rom, your kernel will be replaced with one if the rom.
so you have to reflash your custom kernel
HelpMeruth said:
if you update your rom, your kernel will be replaced with one if the rom.
so you have to reflash your custom kernel
Click to expand...
Click to collapse
Thank you for the answer, but despites that is there anything I should be aware of when using a custom kernel? Xposed, going back to stock, etc
Nothing i know of, xposed doesnt give any problems to me when i flash a kernel so you should be good.
so its pretty save to flash a kernel
HelpMeruth said:
Nothing i know of, xposed doesnt give any problems to me when i flash a kernel so you should be good.
so its pretty save to flash a kernel
Click to expand...
Click to collapse
One more question if you don't mind, how can I custom my kernel settings? Currently on Squid Kernel (Moto g 2015), CM12.1
Install kernel adiutur from the playstore. With that app you change all your settings

Categories

Resources