Is sd-ext partition compulsory for installing and using JaggyRom 4.1?
And is JaggyDzire 2.0 a stock-based ROM?
Look here:
http://forum.xda-developers.com/showthread.php?t=1754876
Jaggyrom, for me, is the best rom gb based...expecially for mounts2sd support.
Question still unanswered.
Mionetto80 said:
Look here:
http://forum.xda-developers.com/showthread.php?t=1754876
Jaggyrom, for me, is the best rom gb based...expecially for mounts2sd support.
Click to expand...
Click to collapse
Thanks for telling, but I still haven't received the answer to my questions.
Thanks, anyway.
At that link you can see immediately that JaggyDzire v2.0 isn't stock-based ROM because it's ICS. I think that for the jaggyrom 4.1 sd-ext is compulsory because it has the mounts2sd script. It reverses the date folder with sd-ext.
Mionetto80 said:
At that link you can see immediately that JaggyDzire v2.0 isn't stock-based ROM because it's ICS. I think that for the jaggyrom 4.1 sd-ext is compulsory because it has the mounts2sd script. It reverses the date folder with sd-ext.
Click to expand...
Click to collapse
Oh, thanks! Didn't get your answer then. I'll press the 'Thanks' button.
stroLLium said:
Oh, thanks! Didn't get your answer then. I'll press the 'Thanks' button.
Click to expand...
Click to collapse
yes jaggyrom 4.1 reqiures and ext2/ext 3 partition because all the /system(.apks) are stored in it automattically It needs a ext2/ext3 partition because it is a sense 4 rom and to install a sense 4 rom 1 gb of intenal memory is required but our pico has only 150 mb . So we need a sd-ext partition
jaggydesire 2.0 is based on ICS
Related
While some of you have installed the ICS leaked ROM, still, the kernel source is not yet released by Samsung. As a result, a custom kernel that compile from the source is not available in this moment.
Despite that, I have injected superuser and init.d support to the stock kernel. Please find below for the link (just flash it thru normal CWM flash zip process)
http://dl.dropbox.com/u/55832652/i9...ock/i9103_I9103XXLQ7_kernel_stock_tweak01.zip
Features:
1) Rooted. If your ROM is not rooted, after flashing this kernel, you will get root!
2) init.d support, so, the kernel will run custom script located in /system/etc/init.d/ (remember to set the init.d folders & files to 777 permission)
I am also preparing a CWM flashable ROM (flash thru normal CWM flash process)
After I received the kernel source from Samsung, I will patch back the changes in ardatdat v1.9beta kernel to that. Thanks.
*************************************************************
EDIT: The CWM flashable ROM is uploaded to multiupload:
Features:
1) Normal CWM flashable
2) Bundled with rooted & init.d kernel
3) Free up /system/ space: 22MB
File: CWM_CUSTOM_I9103XXLQ7_ROM01.zip
Link: http://www.multiupload.hk/VRZNGRRFI6
MD5: 2E100180B0124AF7B62707416A37DB8B
You could flash it using normal CWM flash zip process.
You might find out that the original ICS leak occupy a lot of space in /system/. As such, the ROM I have uploaded have chopped out some Samsung apps as well as the GenieWidget. This frees up 22MB in /system/
All are welcome to use that zip as a stepping stone to do further customization
*************************************************************
reserved...
so great! Tks again
Enviado desde mi GT-I9103 usando Tapatalk 2
Thanks a lot, ardatdat!!! This is more than enough for me at this moment!!!
I try to make a CWM-flash ROM with kitchen,but there were some wrong with the update-script.
So waiting for your ROM!
Works great. Thanks ardatdat.
Sent from my GT-I9103 using xda app-developers app
Tnx dude! Works, and looks fine!
kurtfloyd said:
I try to make a CWM-flash ROM with kitchen,but there were some wrong with the update-script.
So waiting for your ROM!
Click to expand...
Click to collapse
Updated in post #1
help me
am on neo rom v3.0 now..plus ardat kernel 1.83 .. can i flash ur rom uploaded here and kernel directly or shud i do anything before that?
ardatdat said:
You might find out that the original ICS leak occupy full /system/ usage such that there are no space left to inject anything there. As such, the ROM I have uploaded have chopped out some Samsung apps as well as the GenieWidget. The free space left in /system/ should be 22MB.
Click to expand...
Click to collapse
Hmmm, interesting. I have 73MB's free space on my /system. I have Machram's backup and TouchWiz UX + SGS3 widgets installed and it doesn't exceed the partition size.
Sent from my GT-I9103
One silly Question to Ardatdat. dear, what is diff in this rom & kernel that makes ICS leaked rom from it..??
Also, what is the capacity of this Kernel..?? does it support to VOODOO sound as well..??
I know this is Silly, but please reply..
kataria.vikesh said:
One silly Question to Ardatdat. dear, what is diff in this rom & kernel that makes ICS leaked rom from it..??
Also, what is the capacity of this Kernel..?? does it support to VOODOO sound as well..??
I know this is Silly, but please reply..
Click to expand...
Click to collapse
Kernel - Its Pre-rooted and has init.d script support. It will not support Voodoo as Ardatdat is waiting for Kernel source from samsung.
ROM - He made it as CWM flashable instead of a recovery file. Also he has deleted some bloats to get some free space.
selva.simple said:
Kernel - Its Pre-rooted and has init.d script support. It will not support Voodoo as Ardatdat is waiting for Kernel source from samsung.
ROM - He made it as CWM flashable instead of a recovery file. Also he has deleted some bloats to get some free space.
Click to expand...
Click to collapse
One more Question, what is init.d script & what is its function for that..??
kataria.vikesh said:
One more Question, what is init.d script & what is its function for that..??
Click to expand...
Click to collapse
init.d scripts are those set of scripts that will get executed each time when the mobile gets booted. Many System performance related scripts can be placed in \system\etc\init.d folder. For such scripts to get executed during boot time, the kernel shud supprt that. Ardatdat's kernel does tat job.
Do a complete cwm backup first. Then, flash the rom above in case u want to revert, restore the cwm backup.
Sent from my GT-I9103 using xda premium
ardatdat said:
Do a complete cwm backup first. Then, flash the rom above in case u want to revert, restore the cwm backup.
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
I will buddy, but do I have to do data deleted or factory reset after flashing your ROM, coz Recently I have downloaded lots of applications..??:fingers-crossed:
OMG, my thanks is finished for today, I will hit thanks 2morrow for selva & Addy(ardatdat) also.
I theory, you could flash it directly and your data will not be deleted. But a factory reset is suggested if you upgrade from gingerbread to ics :thumbup:
Sent from my GT-I9103 using xda premium
Thanks for answering. My internet connection is not stable here...
Sent from my GT-I9103 using xda premium
kataria.vikesh said:
I will buddy, but do I have to do data deleted or factory reset after flashing your ROM, coz Recently I have downloaded lots of applications..??:fingers-crossed:
Click to expand...
Click to collapse
If u r moving on from GB to ICS, do data wipe too buddy. Else u will face lot of FC, bit drag while scroll and battery drain will happen.
ardatdat said:
I theory, you could flash it directly and your data will not be deleted. But a factory reset is suggested if you upgrade from gingerbread to ics :thumbup:
Sent from my GT-I9103 using xda premium
Click to expand...
Click to collapse
selva.simple said:
If u r moving on from GB to ICS, do data wipe too buddy. Else u will face lot of FC, bit drag while scroll and battery drain will happen.
Click to expand...
Click to collapse
No buddy, I m already over ICS. thats why asking..coz I need stabled ICS with supporting kernels
We all have a storage problem with htc chacha so we want explain about INT2EXT in that thread http://forum.xda-developers.com/showthread.php?t=1716124
how to partition sd card and what is best partition and size to make for our phone ( Htc chacha ) and what is best INT2EXT we should download ???????
there is another thing i found in that thread
'' Prerequisites:
-Rooted Rom with init.d support
-SD-EXT partition
-100mb internal is needed for every 500mb sd-ext ''
so what is that mean we only have 100mb in internal
so little help here
[A]
minahacker said:
We all have a storage problem with htc chacha so we want explain about INT2EXT in that thread http://forum.xda-developers.com/showthread.php?t=1716124
how to partition sd card and what is best partition and size to make for our phone ( Htc chacha ) and what is best INT2EXT we should download ???????
there is another thing i found in that thread
'' Prerequisites:
-Rooted Rom with init.d support
-SD-EXT partition
-100mb internal is needed for every 500mb sd-ext ''
so what is that mean we only have 100mb in internal
so little help here
Click to expand...
Click to collapse
ChaCha Stock ROM don't support int2ext... for using this feature your ChaCha should running ROMs which support int2ext...
Partition your SD-Card in a 512 MB Ext 2/3/4 with "swap 0"... (use CMW) and INT2EXT or INT2EXT+ is better for ChaCha...
mortal19xx said:
ChaCha Stock ROM don't support int2ext... for using this feature your ChaCha should running ROMs which support int2ext...
Partition your SD-Card in a 512 MB Ext 2/3/4 with "swap 0"... (use CMW) and INT2EXT or INT2EXT+ is better for ChaCha...
Click to expand...
Click to collapse
Thank u
mortal19xx said:
ChaCha Stock ROM don't support int2ext... for using this feature your ChaCha should running ROMs which support int2ext...
Partition your SD-Card in a 512 MB Ext 2/3/4 with "swap 0"... (use CMW) and INT2EXT or INT2EXT+ is better for ChaCha...
Click to expand...
Click to collapse
can i use that thread ?
http://forum.xda-developers.com/showthread.php?t=919326
[A]
minahacker said:
can i use that thread ?
http://forum.xda-developers.com/showthread.php?t=919326
Click to expand...
Click to collapse
yes... but I prefer int2ext...
but i read intex + is bettr n fast ?
but i read intex + is bettr n fast ? ?
[A]
itz_me_rockstar said:
but i read intex + is bettr n fast ? ?
Click to expand...
Click to collapse
What do you mean "better & faster"??? both of them do the same...
i'm using INT2EXT+ since my old HTC Magic "Sapphire 32A" and it's working very awesomely! and yes it need u to have a supported ROM like CM. my EXT4 partation is 5GB xD and it's still working perfectly hundreds of apps no problem at all!
hi
i read whole of froum and i can not find the solution for memory script
befor i use cabon rom v 4.3 with no problem in memory script when i flash the rom to cyanogen 10.2 beta2 android 4.3 and i lost my internal memory !!
i try int2ext and m2sd and ungaze and re partioion sd from different ver (twrp and cm yanoo90 and cm 6.0.1.2 and toch philz)of cm recovery and mini tool partition but i havent increase internal memory
int2ext not work
m2sd has not mount internal memory
ungaze (flashable and the copy file with the set premision) not work
i try kernel jarvis v5 but the phone load in boot logo and i must re flash to 4.3 whith out flash the jarvis kernel
please help me
tnx
flashed cm 10.2 LEAN MEAN PASTRY MACHINE ??
have you tried jarvis kernel v5 722mhz?..works for me.
Just use int2ext+ ...it works perfctly..
Sent from my Explorer A310e using XDA Premium 4 mobile app
int2ext works fine... just put script in system>etc>int.d set permission reboot... works fine for me.... :sly:
amit.lohar said:
flashed cm 10.2 LEAN MEAN PASTRY MACHINE ??
Click to expand...
Click to collapse
i use CM10.2 BETA#2 spotted in the wild
i don not know what the different cm 10.2 spotted in the wild and cm 19.2 lean mean pastry machin because when i download the wild after 3 day the uploader , upload lean mean pastry machine file !!
the name of two file when i download is cm-10.2-20131018-UNOFFICIAL-pico.zip
Affangta said:
have you tried jarvis kernel v5 722mhz?..works for me.
Click to expand...
Click to collapse
i tried jarvis kernel 5 and jarvis kernel 5 for weak pico and kernel jarvis ver 6 but when i flash each other the kernel phone still load in boot logo ...!!
amit.lohar said:
Just use int2ext+ ...it works perfctly..
Sent from my Explorer A310e using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i can not use int2ext+ because when i try to flashable file cronmodint2ext+.zip it is fail and cant flash in recovery mode and so i copy the file 40int2exe in int.d folder and set premision and reboot still i dont have any memory script!
nivra_na said:
i can not use int2ext+ because when i try to flashable file cronmodint2ext+.zip it is fail and cant flash in recovery mode and so i copy the file 40int2exe in int.d folder and set premision and reboot still i dont have any memory script!
Click to expand...
Click to collapse
Do u hav an ext partition???
N tell me which files r prsnt in init.d folder..
Sent from my Explorer A310e using XDA Premium 4 mobile app
born noob developing pro said:
int2ext works fine... just put script in system>etc>int.d set permission reboot... works fine for me.... :sly:
Click to expand...
Click to collapse
i tried this for first but it is not work for me !!
amit.lohar said:
Do u hav an ext partition???
N tell me which files r prsnt in init.d folder..
Sent from my Explorer A310e using XDA Premium 4 mobile app
Click to expand...
Click to collapse
yeah.i partition my sd card as twrp recovery and ext partition as ext 4
in the forlder init.d ther was 3 file :
00banner
50selinuxrelabel
90userinit
and i copy 40int2exit to this folder and set premision but not work !
nivra_na said:
yeah.i partition my sd card as twrp recovery and ext partition as ext 4
Click to expand...
Click to collapse
Didnt get this..
Mke sure u hav created only one partition..
U dng evrythin ryt..jst mke sure u tick all the permisions..
N can u tell hw much is ur intrnl mmry now? Used n free bth
Sent from my Explorer A310e using XDA Premium 4 mobile app
nivra_na said:
i tried jarvis kernel 5 and jarvis kernel 5 for weak pico and kernel jarvis ver 6 but when i flash each other the kernel phone still load in boot logo ...!!
Click to expand...
Click to collapse
try aries kernel v3.5, it works for everyone.
Affangta said:
try aries kernel v3.5, it works for everyone.
Click to expand...
Click to collapse
yeah,i tried aries kernel v3,5,it work for me in increase memory but the phone is buggy and not working like before flashing the kernel and the most app force close !!
when i flash the aries kernel v3.5 , i partitioned my sd ex 1gb as ex4 and swap size as 64
di i right for flash this kernel ?!
amit.lohar said:
Didnt get this..
Mke sure u hav created only one partition..
U dng evrythin ryt..jst mke sure u tick all the permisions..
N can u tell hw much is ur intrnl mmry now? Used n free bth
Sent from my Explorer A310e using XDA Premium 4 mobile app
Click to expand...
Click to collapse
tnx alot
i unzip the file int2ext+ and copy 40int2ext ti init.d folder and set premision and reboot now my available is 841 and total 0.96 gb
so tnx for help
nivra_na said:
yeah,i tried aries kernel v3,5,it work for me in increase memory but the phone is buggy and not working like before flashing the kernel and the most app force close !!
when i flash the aries kernel v3.5 , i partitioned my sd ex 1gb as ex4 and swap size as 64
di i right for flash this kernel ?!
Click to expand...
Click to collapse
don't make swap partition..make sd-cache ext4 primary partition as third partition.
nivra_na said:
i don not know what the different cm 10.2 spotted in the wild and cm 19.2 lean mean pastry machin
Click to expand...
Click to collapse
CM 10.2 beta 1 = spotted in the wild
CM 10.2 beta 2 = lean mean pastry
Just like android names jelly bean, kit kat, etc.
Sent from my HTC Explorer A310e using Tapatalk
Affangta said:
don't make swap partition..make sd-cache ext4 primary partition as third partition.
Click to expand...
Click to collapse
how to make sd-cache ext4 primary partition as third partition ?!
please guide for this ...
amit.lohar said:
Didnt get this..
Mke sure u hav created only one partition..
U dng evrythin ryt..jst mke sure u tick all the permisions..
N can u tell hw much is ur intrnl mmry now? Used n free bth
Sent from my Explorer A310e using XDA Premium 4 mobile app
Click to expand...
Click to collapse
is the rom cm-10.2-20131011-UNOFFICIAL-pico-joilaroi-v7 support the int2sd ?!
i flash this rom and the same problem persist and script 40int2ext dont work
asdofindia said:
CM 10.2 beta 1 = spotted in the wild
CM 10.2 beta 2 = lean mean pastry
Just like android names jelly bean, kit kat, etc.
Sent from my HTC Explorer A310e using Tapatalk
Click to expand...
Click to collapse
please see the link :
http://forum.xda-developers.com/showpost.php?p=46589240&postcount=297
in title say cm 10.2 beta 2 not beta 1
is there any ics rom with s2e function working?
s2e work on all custom roms not work on stock
pavel73 said:
s2e work on all custom roms not work on stock
Click to expand...
Click to collapse
i tried on KITKAT SANDWICH V1.0 ,, didnt work.
bharathbondfire said:
i tried on KITKAT SANDWICH V1.0 ,, didnt work.
Click to expand...
Click to collapse
Try Mounts2SD It is user friendly and works with ICS.
s2e from my experience is working mostly on GB.
bharathbondfire said:
i tried on KITKAT SANDWICH V1.0 ,, didnt work.
Click to expand...
Click to collapse
you have to use my script then the special s2e.apk for 4+
Anyone able to get working memory script for gamersab rom ??
Tried mount2sd[both new and old] int2ext d2ext etc !! Nothing works :/
gauravsaini964 said:
Anyone able to get working memory script for gamersab rom ??
Tried mount2sd[both new and old] int2ext d2ext etc !! Nothing works :/
Click to expand...
Click to collapse
well ive tried mount2sd and int2ext4 in GB roms like Jaggy and Ateeq ...
i thnk ur not doing it right ... try int2ext4 with one ext4 partition ... make sure u dont use the + versions ...
mrroks said:
well ive tried mount2sd and int2ext4 in GB roms like Jaggy and Ateeq ...
i thnk ur not doing it right ... try int2ext4 with one ext4 partition ... make sure u dont use the + versions ...
Click to expand...
Click to collapse
Appreciate your help but I left that rom !!!