[Q] Help me on my Xperia J please - Sony Xperia Miro, Tipo (Dual), J, E

I accidentally wipe/reset my stock JB 4.1.2. when im trying to flash a custom ROM. I already unlock the BL and have the CWM but I cant flash a custom ROM or flash a stock ROM on my J please help me.
what i have:
1. SE Xperia Flasher flashtool ver 0.8.5.0
2. CWM v6.0.2.5 installed on my phone
3. ST26i_11.2.A.0.21 CE ftf
4. boot.img
5. kernel.sin
my phone was stuck up on SONY logo.
and it cant went through the flashing of ftf file due to USB debugging disable. my phone was totally no ROM right now, please guys help me with my problem.

flash ftf file in flash mode n tick wipe data.... ... then copy customrom zip file into ext sd... flash boot.img file in fastboot mode..then enter into cwm n install rom from ext sd using zip file u placed on ext sd.... must check instructions on rom provider for data wipe options...install n restart n enjoy....

Related

[Q] My Xperia L this bricked.. I need Help!!!!!!!!!!!!!!!!!

Good afternoon everyone .. I have a problem and would like your help .. this bricked my Xperia U C2104 and I can not pass or flashmode FASTMODE to install rom via Flashtool. He does not care does nothing .. I tried to install ClockworkMod but it happened .. If anyone can help me I would be very grateful ...
PS: I'm trying to put the path setool2 funcianal not found this program .. so error "smart card not found"
Sorry for my English, I'm Brazilian
Is your phone staying at the boot animation ? Download a custom rom made by Serajr and copy to sd.
If yes, flash vengeance kernel (do not flash modules!) via fastboot, goes to CWM, partition and format /system. Then flash the rom using cwm, and you will be able to flashmode via flashtool. When your phone boot's up and you able to use it, flash extended kernel v2 to have wifi working. I done it and fixed my XL from brick
damian01211 said:
Is your phone staying at the boot animation ? Download a custom rom made by Serajr and copy to sd.
If yes, flash vengeance kernel (do not flash modules!) via fastboot, goes to CWM, partition and format /system. Then flash the rom using cwm, and you will be able to flashmode via flashtool. When your phone boot's up and you able to use it, flash extended kernel v2 to have wifi working. I done it and fixed my XL from brick
Click to expand...
Click to collapse
Thank you for your friend .. My Xperia or boot appears ... I can not call it .. I tried to put the fastboot message appears QHSUSB_DLOAD .. I can not even access to flash a kernel ..Sought solutions .. the only one I found was by SEtoll2 can not put this program functional for Win7 .. I do not know if will work too ..
:crying: :crying:

[Q] Xperia Miro Help

I have flashed Cwm for Miro and entered Cwm to flash rom , to flash I format system and I entered install zip from sdcard but my sdcard is not detected so I restarted my phone I can't enter the Cwm and also system help me to restore to working phone
Flash stock ftf. Search in Miro general section.
Sent from my Xperia Miro using Tapatalk 2

Xperia Arc S CWM flashing problems, ( Xparts and RecoverX ) don't work !!!!

I have Xperia Arc s with ICS stock rom ,I want t install a custom rom , I've already rooted the phone.. then the problem is installing recovery:
1 - I tried Xparts it says cwm installed successfuly reboot your device.. but nothing happedns it still can't boot into recovery
2- I tried RecoverX. I chose sony ericson the xperia arc s then it starts the operation but it says: (recovery download complete, you can now continue.)
(I press next it says the recovery is in recovery folder now you have to flash it)
SO PLEASE HELP
yazanee said:
I have Xperia Arc s with ICS stock rom ,I want t install a custom rom , I've already rooted the phone.. then the problem is installing recovery:
1 - I tried Xparts it says cwm installed successfuly reboot your device.. but nothing happedns it still can't boot into recovery
Click to expand...
Click to collapse
You have to unlock bootloader and flash custom kernel with CWM recovery or install Xparts ver. 5 (worked for me), not 7.

Bricked Huawei y6

Hello
I own a Huawey Y6 SCL-L21 dual sim and last night i try to install a custom rom and problems are:
-First of all i unlocked bootloader and FRP
-Flashed TWRP with Adb
-Download custom rom and gapps and put on sd
-Boot in TWRP and....... wipe my internal storage cache and davlik without make a backup....i know my bad(
-Then i just go to install and try install rom (Cyanogenn 12.1) and after 3 seconds stops and its say this package is for device: y6; this device is Honor4a
"E:Error executing updater binary in zip ' /sdcard/cm-12.1-2016514-UNOFFICIAL-Y6.ZIP' Error flashingzip
-I try all custom roms for my Y6 from XDA and i just get same error for all of them
-Now the real problem is because i didnt make backup befor wipe all data now i just dont have any rom installed on my device and i cant use it
-Now i just want go back at stock rom via update.app firmware downloaded from Huawei and because i have custom recovery TWRP i cant flash it
Please help me replace TWRP with stock recovery because i want install stock rom again.
Sorry for my english i hope u guys can understand me and help.
Thnx in advance.
AndroMen said:
Hello
I own a Huawey Y6 SCL-L21 dual sim and last night i try to install a custom rom and problems are:
-First of all i unlocked bootloader and FRP
-Flashed TWRP with Adb
-Download custom rom and gapps and put on sd
-Boot in TWRP and....... wipe my internal storage cache and davlik without make a backup....i know my bad(
-Then i just go to install and try install rom (Cyanogenn 12.1) and after 3 seconds stops and its say this package is for device: y6; this device is Honor4a
"E:Error executing updater binary in zip ' /sdcard/cm-12.1-2016514-UNOFFICIAL-Y6.ZIP' Error flashingzip
-I try all custom roms for my Y6 from XDA and i just get same error for all of them
-Now the real problem is because i didnt make backup befor wipe all data now i just dont have any rom installed on my device and i cant use it
-Now i just want go back at stock rom via update.app firmware downloaded from Huawei and because i have custom recovery TWRP i cant flash it
Please help me replace TWRP with stock recovery because i want install stock rom again.
Sorry for my english i hope u guys can understand me and help.
Thnx in advance.
Click to expand...
Click to collapse
Bro , Download Stock Rom For Your Model . Then extract recovery image file using Huawei Update Extractor Tool
And follow the same steps for flashing stock recovery as you flashed the TWRP recovery
SmartDrevil said:
Bro , Download Stock Rom For Your Model . Then extract recovery image file using Huawei Update Extractor Tool
And follow the same steps for flashing stock recovery as you flashed the TWRP recovery
Click to expand...
Click to collapse
Thnx m8.
Btw i figured out how to flash Huawei stock recovery and then update.app.
Phone it's just like new out of box:laugh::laugh::laugh:

msm_sdcc3 problem in trwp

Hello guys , after i unbrick my phone GT-I9195 LTE
i'm unable to access to internal storage and i flashed the new system in the SD Card.
I flashed a lot of roms but all of them not work .
the problem is in the recovry TRWP.
in /dev/block/platform/msm_sdcc3 ---> should be msm_sdcc1
when i change it to msm_sdcc1 , i can format and mount all partitions .
but when i reboot to recovery again it back to msm_sdcc3 .
this is the problem after i flash any rom by odin or i flash any other rom via zip in TRWP it not boot because i should fix this folder permanently .
please guys help me.
dont reboot, directly flash rom after changed to msm-sdcc1

Categories

Resources