Hey guys, help me please.
My touchscreen stop works, i dont know why, but the only part of works is the bottom os screen. i tried to calibrate but dont work. someone know how solve?
StrokeP said:
Hey guys, help me please.
My touchscreen stop works, i dont know why, but the only part of works is the bottom os screen. i tried to calibrate but dont work. someone know how solve?
Click to expand...
Click to collapse
Well, we should figure out if it's a hardware problem or software problem.
Have you recently flashed another ROM or kernel, or messed with system files?
Have you dropped, pushed hard on the screen, or caused any damage to the screen?
Regards, Drago
No, my phone is on my pocket yesterday on a party. when i post a photo on istagran de touch become crazy and i restart the phone and the touch stop.
StrokeP said:
No, my phone is on my pocket yesterday on a party. when i post a photo on istagran de touch become crazy and i restart the phone and the touch stop.
Click to expand...
Click to collapse
Have you tried reflashing stock firmware with Flashtool?
I recommend you trying that, but be sure to uncheck the "wipe data" checkbox, else you will lose your apps and their data.
As reading your story it doesn't sound like a hardware issue, so reflash stock firmware, perhaps try the calibration patch once more after reflashing, and tell us the results.
Regards, Drago
Related
Hello! Sorry for my English. I have a problem. not included phone Qtek8310, just white screen and all. Hard Reset not working. In Bootloader does not include: (. Help me please.
Thank you in advance
Ok so what were you trying to do?
And what does white screen mean? Do you see the bootloader screen with the three band color? Or can you see the splash screen when you first power up the phone?
Sounds like a ROM update gone bad.
Bootloader, I see none. When you sign a white screen. Computer saw no phone.
Quarx said:
Bootloader, I see none. When you sign a white screen. Computer saw no phone.
Click to expand...
Click to collapse
How did this happen? What were you trying to do? That may be helpful in solving this problem!
This was probably due to the fact that I wrote in the program TeraTermPro format ALL. After that phone ceased to be included
Quarx said:
This was probably due to the fact that I wrote in the program TeraTermPro format ALL. After that phone ceased to be included
Click to expand...
Click to collapse
Sorry my friend - this phone is now completely dead. I've heard of people trying to open their phones and trying to manually revive the OS by hooking up to the chip via JTAG, but I don't think anyone has been successful. See this thread, and you will know what I mean that the phone is dead. Sorry.
Thank you. very sorry .....
Topic can be closed.
Quarx said:
This was probably due to the fact that I wrote in the program TeraTermPro format ALL. After that phone ceased to be included
Click to expand...
Click to collapse
YES! TeraTermPro will kill the phone with the format ALL command. It happened to me recently but was lucky my phone was still under warranty. Send it to service center for replacement of the mother board. Luckily they did know what happened.
I am sorry about your case and good luck to you.
Hi all,
I have been flashing/testing many roms for a number of years now. I particularly enjoyed Jasjamming in my Tytn I days. Now...
Great work seen by many developers.
When I first got my Kaiser, i tried HardSPL, and had "white screen" issue, I then followed instructions on "white screen" thread....copied cab to kaiser....ran cab from kaiser..........eventually was able to flash to a new/ different ROM
However, I recently flashed my Kaiser and after using it for 6-7 hours after flash, it soft reset itself. It continued to keep soft reseting itself without geting to boot screen. It kept reading "smart mobility" and it would reset, vibrate, reset, vibrate, reset.......
I tried EVERYTHING - remove battery, flash back to original ROM, change radio (bootloader worked in safe mode - holding down camera button), but to no avail.
I then tried MTTY, and no go with this too. I eventually had to give my phone back in to HTC.
The question I ask is what is the cause of this? Is it excessive flashing? Is is HardSPL? Any comments/ suggestions would be welcomed...
Many thanks
AvinashDhaniraj said:
Hi all,
I have been flashing/testing many roms for a numer of years now. I particularly enjoyed Jasjamming in my Tytn I days. Now...
Great work seen by many developers.
When I first got my Kaiser, i tried HardSPL, and had "white screen" issue, I then followed instructions on "white screen" thread....copied cab to kaiser....ran cab from kaiser..........eventually was able to flash to a new/ different ROM
However, I recently flashed my Kaiser and after using it for 6-7 hours after flash, it soft reset itself. It continued to keep soft reseting itself without geting to boot screen. It kept reading "smart mobility" and it would reset, vibrate, reset, vibrate, reset.......
I tried EVERYTHING - remove battery, flash back to original ROM, change radio (bootloader worked in safe mode - holding down camera button), but to no avail.
I then tried MTTY, and no go with this too. I eventually had to give my phone back in to HTC.
The question I ask is what is the cause of this? Is it excessive flashing? Is is HardSPL? Any comments/ suggestions would be welcomed...
Many thanks
Click to expand...
Click to collapse
Did you try removing the sd card, some times it can cause continues soft reset.
Regards
shafez said:
Did you try removing the sd card, some times it can cause continues soft reset.
Regards
Click to expand...
Click to collapse
I tried removing SD card.
Thanks.
I know you say you have been flashing for a number of years, but the question I have is did you normally HR prior to a flash as well as after a flash before setting up your ppc?
Dude I had the same problem.
It will take you prolly a few trys, but you can force your phone into the testing screen where you can install the rom over again, or install the correct radio, then do it again and reinstall the correct rom.
Use this button combination:
Press and hold: POWER BUTTON AND CAMERA BUTTON AT THE SAME TIME....
AND WHILE THEY ARE HELD IN, CLICK THE SOFT RESET BUTTON (HOLD IT IN FOR A FEW SECONDS AND RELEASE).. DONT RELEASE THE OTHER BUTTONS TIL THE PHONE GOES INTO DIAGNOSTIC MODE.
The trick is holding in the camera and power buttons as far as they'll go, because the camera button has a "press" setting and a deeper click setting. Seriously.
oh.. and this will only work if you have spl installed
edit: if you're doing this correctly and you still can't get it fixed..... all i can say is hook it up to a car battery some how and fry it... and return it.
P1Tater said:
I know you say you have been flashing for a number of years, but the question I have is did you normally HR prior to a flash as well as after a flash before setting up your ppc?
Click to expand...
Click to collapse
Yes, I do always and have always done that. It's funny you mentioned that, as I always did do this, and thought I'm over-precautious.
Thanks
nimda0 said:
Dude I had the same problem.
It will take you prolly a few trys, but you can force your phone into the testing screen where you can install the rom over again, or install the correct radio, then do it again and reinstall the correct rom.
Use this button combination:
Press and hold: POWER BUTTON AND CAMERA BUTTON AT THE SAME TIME....
AND WHILE THEY ARE HELD IN, CLICK THE SOFT RESET BUTTON (HOLD IT IN FOR A FEW SECONDS AND RELEASE).. DONT RELEASE THE OTHER BUTTONS TIL THE PHONE GOES INTO DIAGNOSTIC MODE.
The trick is holding in the camera and power buttons as far as they'll go, because the camera button has a "press" setting and a deeper click setting. Seriously.
oh.. and this will only work if you have spl installed
edit: if you're doing this correctly and you still can't get it fixed..... all i can say is hook it up to a car battery some how and fry it... and return it.
Click to expand...
Click to collapse
Hi
I did, go into boot mode (tri-color). I did manage to flash original ROM, and flash radio, but this didn't help. The phone continued to soft reset loop
AvinashDhaniraj said:
Yes, I do always and have always done that. It's funny you mentioned that, as I always did do this, and thought I'm over-precautious.
Thanks
Click to expand...
Click to collapse
NP. I hope u didn't take offense to the dumb question, but as you know, recently noone pays attention to what they are doing to this overpriced cell phone. I just know that by doing so, it helps get rid of all hang-arounds and tid-bits from previous rom istalls as well as cabs.
AvinashDhaniraj said:
Hi
I did, go into boot mode (tri-color). I did manage to flash original ROM, and flash radio, but this didn't help. The phone continued to soft reset loop
Click to expand...
Click to collapse
Exactly what rom (version and all) and what radio (version and all) are you using?
More info please....
I think you're using either the wrong combination, or something. The problem isnt spl, it's working if you can get to the diag screen (TRI COLOR).
nimda0 said:
Exactly what rom (version and all) and what radio (version and all) are you using?
More info please....
I think you're using either the wrong combination, or something. The problem isnt spl, it's working if you can get to the diag screen (TRI COLOR).
Click to expand...
Click to collapse
I used Duttys_Official_WM6.1_Rom_5.2.19716_UC (KAIS_Radinly_1.64.08.21_CustomRUU), then I flashed to L26_WM_6.1_PRO.V5
Is this a ROM or/and RADIO issue? Is it due to excessive flashing? We need to identify this problem, or else we will all be "flashing in the dark"......hoping that this doesn't happen....
I'm pretty sure it's a radio issue in your case.
I think you should use a different radio with that Rom.
Try reflashing the radio first, using the polaris radio. That's what me, my girl, and my friend are all using and it works PERFECT. Then reflash duttys rom after you've done the radio.
It should work fine. Let me know.
Post updated rom / radio versions once your done... and use the most current polaris radio and most current duttys rom.
I'm pretty sure it's not from excessive flashing because I am sure I flash at least twice a day whether it be a rom, radio, splash screen or whatever. I think I have seriously become a flash-a-holic.
No doubt.... he's got a radio / rom incompatability issue fo sho'
nimda0 said:
No doubt.... he's got a radio / rom incompatability issue fo sho'
Click to expand...
Click to collapse
I can't understand this as there are many users with the ROM/ RADIO combo I've used in these forums, and they don't seem to be having any problems
For what it's worth.. sometimes roms/radios can be a little glitchy. If you installed the rom first, then the radio, that couldve caused the problem. Did you?
If not, just try what I said.. see if it works. If not, you'll at least know it's not rom / radio specific and it has to be a device issue.
I think you'll find it works though.
Could it maybe be faulty NAND? I ask because of the Stuck On Boot Screen thread. While the problems aren't exactly the same, they are similar and having some faulty blocks holding old flash info could definately cause a crash/reboot loop.
jarek91 said:
Could it maybe be faulty NAND? I ask because of the Stuck On Boot Screen thread. While the problems aren't exactly the same, they are similar and having some faulty blocks holding old flash info could definately cause a crash/reboot loop.
Click to expand...
Click to collapse
Hi Jarek91,
How can one prevent/ repair faulty blocks holding old flash info?
Thanks for your comment
nimda0 said:
For what it's worth.. sometimes roms/radios can be a little glitchy. If you installed the rom first, then the radio, that couldve caused the problem. Did you?
If not, just try what I said.. see if it works. If not, you'll at least know it's not rom / radio specific and it has to be a device issue.
I think you'll find it works though.
Click to expand...
Click to collapse
Thanks for the suggestion, I did flash radio first then rom, but to no avail.
You can't. Always flash radio first, rom 2nd... with spl installed. You have to watch though because some roms will require certain radios, and others won't work.. so if you flash the radio first (on occasion) the rom will act up because of the radio incompatability.
I still say give it another whirl with the rom and polaris radio and see where it gets you... flashing radio first.
AvinashDhaniraj said:
Hi Jarek91,
How can one prevent/ repair faulty blocks holding old flash info?
Thanks for your comment
Click to expand...
Click to collapse
Well if it is bad NAND, the only fix is sending the phone back for repair/replacement. As for checking it, I'd talk with GSLEON3. He helped tmac with some MTTY commands to get some diag info that helped to lead to the diagnosis on his device. I'd help with that but I haven't yet had to delve into using MTTY to probe for issues so it's out of my area of knowledge.
ok when i try to change the alarm or the time all i get is a blank screen and when i make a call its all out of sink . any help would be gr8 as a havent got a bloody clue..
thanks in advance
iainbp said:
ok when i try to change the alarm or the time all i get is a blank screen and when i make a call its all out of sink . any help would be gr8 as a havent got a bloody clue..
thanks in advance
Click to expand...
Click to collapse
I had that with a couple of ROMs. I never did figure out what the issue was or how to fix it. I just flashed a different one. Have you recently flashed a custom ROM?
johncmolyneux said:
I had that with a couple of ROMs. I never did figure out what the issue was or how to fix it. I just flashed a different one. Have you recently flashed a custom ROM?
Click to expand...
Click to collapse
how do you flash a rom?. dont think i have ... would it happen if i installed a cab or something . bit of a noob so bear with me ...lol..
this is a pic of my dailing screen
iainbp said:
how do you flash a rom?. dont think i have ... would it happen if i installed a cab or something . bit of a noob so bear with me ...lol
Click to expand...
Click to collapse
I understand that you are still using Stock ROM.
use the process of deduction, trace what recent manila modification, or installed
app you've made which may account to this problem and just uninstall this
otherwise HR is the only solution (this sould be the last recourse)
jigners said:
I understand that you are still using Stock ROM.
use the process of deduction, trace what recent manila modification, or installed
app you've made which may account to this problem and just uninstall this
otherwise HR is the only solution (this sould be the last recourse)
Click to expand...
Click to collapse
i've uninstalled all the apps i've got over the last few days . but still the same
have to keep tryin
iainbp said:
i've uninstalled all the apps i've got over the last few days . but still the same
have to keep tryin
Click to expand...
Click to collapse
apps can cause this.
i installed an app my phone wouldnt load it will stay white on screen had to do hard reset.
all sorted. it was either my taskbar or blk dialer. but all good . just have to find the right app for my phone
I've seen the blank page happen before, it's the sense skin itself. It happens to me when I want to adjust my volume at times, the skin just does not pull up the right information and the screen is blank. You can try to restart manila.exe under the adv task mgr if that helps. usually when that happens I just take the easy way and soft reset.
the rest of your images look like you installed the wrong cab for some app that has to deal with manilla.
Hi guys,
Need help with my tab2 7.0 4.2.2 jelly bean.
Wifi suddenly not working.
When I touch the wifi icon,it did'nt turn fully green...
If I turn on the wifi thru the setting icon, it says Turning on...but nothing happen.
Please refer to the attached images below.
Reset the tablet-Done
Reinstall the firmware-Done
Nothing happen
I'm not an advance person in adroid OS.
Really hope simple explanation & guidance in order to solve this problem.
Stress......
savio666 said:
Hi guys,
Need help with my tab2 7.0 4.2.2 jelly bean.
Wifi suddenly not working.
When I touch the wifi icon,it did'nt turn fully green...
If I turn on the wifi thru the setting icon, it says Turning on...but nothing happen.
Please refer to the attached images below.
Reset the tablet-Done
Reinstall the firmware-Done
Nothing happen
I'm not an advance person in adroid OS.
Really hope simple explanation & guidance in order to solve this problem.
Stress......
Click to expand...
Click to collapse
Is your tablet still covered by warranty? Since no data wipes work, I think it may be an internal problem.
fr4n said:
Is your tablet still covered by warranty? Since no data wipes work, I think it may be an internal problem.
Click to expand...
Click to collapse
Out of warranty....
if not, I send it to service centre...
suspect hardware problem coz i think there's nothings wrong with the software...hope please not.
savio666 said:
Out of warranty....
if not, I send it to service centre...
suspect hardware problem coz i think there's nothings wrong with the software...hope please not.
Click to expand...
Click to collapse
I think you should send it to the service center, then.
I have suspects about hardware issues.
fr4n said:
I think you should send it to the service center, then.
I have suspects about hardware issues.
Click to expand...
Click to collapse
i guess that the only option...
need to send it to service centre soon...
Hi, decided to make this thread since I'm not getting help from the Ask questions thread. Friend of mine had me look into a N5 she got used and it's not working and wants me to see if I can get it to work. Thing is when you boot it up, it takes you to to the startup welcome screen no problem right to the 1st step which is choose a language, as soon as I select any language the screen stutters and the coloring goes all weird and goes to a black screen and sometimes reboots and back to the same welcome select language screen. I already tried wipiing everything, unlocking bootloader and wiping so I can get it back to stock as if it were new, I have no idea what they did to the phone but after doing that thought it would fix it but still having the same issue, any clues on what else to do? should i give up?
daLareid said:
Hi, decided to make this thread since I'm not getting help from the Ask questions thread. Friend of mine had me look into a N5 she got used and it's not working and wants me to see if I can get it to work. Thing is when you boot it up, it takes you to to the startup welcome screen no problem right to the 1st step which is choose a language, as soon as I select any language the screen stutters and the coloring goes all weird and goes to a black screen and sometimes reboots and back to the same welcome select language screen. I already tried wipiing everything, unlocking bootloader and wiping so I can get it back to stock as if it were new, I have no idea what they did to the phone but after doing that thought it would fix it but still having the same issue, any clues on what else to do? should i give up?
Click to expand...
Click to collapse
Have you tried flashing the factory image with fastboot? That's the first thing I would do.
_MetalHead_ said:
Have you tried flashing the factory image with fastboot? That's the first thing I would do.
Click to expand...
Click to collapse
You mean doing this, right?
http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701/
Cause I tried that with no luck.
daLareid said:
You mean doing this, right?
http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701/
Cause I tried that with no luck.
Click to expand...
Click to collapse
What do you mean no luck? Did you get an error message when you flashed it? Are you sure you did it correctly?
_MetalHead_ said:
What do you mean no luck? Did you get an error message when you flashed it? Are you sure you did it correctly?
Click to expand...
Click to collapse
I was able to go through with the whole process but after the reboot, I started up the phone but I'm still stuck on the Welcome screen, as soon as I choose a language the screen stutters and goes black.
daLareid said:
I was able to go through with the whole process but after the reboot, I started up the phone but I'm still stuck on the Welcome screen, as soon as I choose a language the screen stutters and goes black.
Click to expand...
Click to collapse
That's so strange. It seems like it would be a software issue but if you're 100% sure you were able to successfully flash a factory image then I really don't know what's going on. What software version did you flash? I would try to flash a factory image for a different software version. If you're on KitKat then flash a different KitKat image, if on Lollipop then flash a different lollipop image. Make sure to either run the flash-all.bat or to flash EVERYTHING in the image file that gets flashed in the script. That way you know 100% that the phone is back at factory conditions. If you're going to do it manually just open the flash-all.bat with a text editor and follow all the steps that are in the script and in that order. Take a screenshot of the terminal screen for me when it's done flashing.
_MetalHead_ said:
That's so strange. It seems like it would be a software issue but if you're 100% sure you were able to successfully flash a factory image then I really don't know what's going on. What software version did you flash? I would try to flash a factory image for a different software version. If you're on KitKat then flash a different KitKat image, if on Lollipop then flash a different lollipop image. Make sure to either run the flash-all.bat or to flash EVERYTHING in the image file that gets flashed in the script. That way you know 100% that the phone is back at factory conditions. If you're going to do it manually just open the flash-all.bat with a text editor and follow all the steps that are in the script and in that order. Take a screenshot of the terminal screen for me when it's done flashing.
Click to expand...
Click to collapse
Phone was on kitkat so I did it with kit kat, I just flashed 5.0.1 on it and it did go through because it did boot to the Lollipop Welcome screen but same thing happened as soon as I selected a language screen stuttered and stopped working.
daLareid said:
Phone was on kitkat so I did it with kit kat, I just flashed 5.0.1 on it and it did go through because it did boot to the Lollipop Welcome screen but same thing happened as soon as I selected a language screen stuttered and stopped working.
Click to expand...
Click to collapse
So this happened on KitKat as well as Lollipop? I don't know what to tell you then, it seems like it's a software glitch but that's pretty much ruled out. I wonder if it has something to do with data... like it's freaking out when it gets to the point that it has to transmit/receive data. Try doing it with WiFi on and off, SIM card in and out, and try flashing a different radio. If it still does it every time then I guess I'd RMA it.
_MetalHead_ said:
So this happened on KitKat as well as Lollipop? I don't know what to tell you then, it seems like it's a software glitch but that's pretty much ruled out. I wonder if it has something to do with data... like it's freaking out when it gets to the point that it has to transmit/receive data. Try doing it with WiFi on and off, SIM card in and out, and try flashing a different radio. If it still does it every time then I guess I'd RMA it.
Click to expand...
Click to collapse
Unfortunately I can't set any of the setting such as WiFi on or off because as soon as I tap on something the screen goes off, I guess it might be hardware (screen) related, thanks for your help.
daLareid said:
Hi, decided to make this thread since I'm not getting help from the Ask questions thread. Friend of mine had me look into a N5 she got used and it's not working and wants me to see if I can get it to work. Thing is when you boot it up, it takes you to to the startup welcome screen no problem right to the 1st step which is choose a language, as soon as I select any language the screen stutters and the coloring goes all weird and goes to a black screen and sometimes reboots and back to the same welcome select language screen. I already tried wipiing everything, unlocking bootloader and wiping so I can get it back to stock as if it were new, I have no idea what they did to the phone but after doing that thought it would fix it but still having the same issue, any clues on what else to do? should i give up?
Click to expand...
Click to collapse
Did you ever find a fix for this ?
qzcgd said:
Did you ever find a fix for this ?
Click to expand...
Click to collapse
No, I later found that some of the hardware inside (motherboard maybe? not sure which part) but that it was most likely from some irreparable damage to it, and it seemed worthless looking for a piece of an old phone to repair.