Related
Ok so I did some experimenting these past hours and I've found a terrific solution to the Vibrant/SGS4G creaking issue that many people have encountered!
Heres what you need:
*Papertowel
*Scissors
LOL not much of a list but trust me!
Step 1: Take your battery door off of your phone
Step 2:Cut a rectangular piece of papertowel enough to fit over the battery, sim and sdcard
Step 3: Place the rectangle cut over the back of the phone
Step 4: Now put on the battery door directly over the papertowel peice
IE: You should notice that the battery door now fits tighter and has no space to make contact with the plastic inside, the papertowel acts as a buffer between the plastics - eliminating the creaking noises.
[EDIT] - Don't cut too big of a piece and if its not snapping on as normal i'd suggest not forcing it and reducing the size of your cutout.
Kool ill have to try this if the creaking gets to bad. Thanks bro
Sent from my SGH-T959V using XDA Premium App
Kudos to you lol! Reply back with your findings if you decide to try my method
roadrunnerrd3 said:
Kudos to you lol! Reply back with your findings if you decide to try my method
Click to expand...
Click to collapse
Will do when I try, creaking isn't that bad yet but it will most definetly get worse over time but atleast we can fix that now.
Sent from my SGH-T959V using XDA Premium App
Haven't heard any creaking yet. I've owned a Vibrant and now this. Wouldn't the paper towel cause more heat? I dunno. I'm thinking it's like leaving your laptop on top of your bed effect. But then again it is thin. So I dunno. lol.
The battery door definitely fits a bit loose to the back of the device and makes loose contact with the bezel. What I did was just stick two pieces of scotch tape to the back of the cover side by side which seemed to work fairly well.
Not having to do with the battery door, but if your bezel creaks, some units have loose bezels out of the box. You could try to tighten the screws on the bezel on the back of the bezel (with the cover removed). Of course, I am not responsible if you break it.
Mine creaks around the volume rocker
Sent from my SGH-T959V using Tapatalk
XPLANE9 said:
The battery door definitely fits a bit loose to the back of the device and makes loose contact with the bezel. What I did was just stick two pieces of scotch tape to the back of the cover side by side which seemed to work fairly well.
Not having to do with the battery door, but if your bezel creaks, some units have loose bezels out of the box. You could try to tighten the screws on the bezel on the back of the bezel (with the cover removed). Of course, I am not responsible if you break it.
Click to expand...
Click to collapse
My bezel definitely creaks . So all I gotta do is tighten the screws behind the battery cover right?
Sent from my SGH-T959V using XDA App
icy56 said:
My bezel definitely creaks . So all I gotta do is tighten the screws behind the battery cover right?
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
It helped a little on my unit. I don't think it is the bezel itself as it is the battery door contacting the bezel in a manner that causes the creaking. Does it creak if you take off the cover?
This worked great lol
Sent from my SGH-T959V using XDA App
XPLANE9 said:
It helped a little on my unit. I don't think it is the bezel itself as it is the battery door contacting the bezel in a manner that causes the creaking. Does it creak if you take off the cover?
Click to expand...
Click to collapse
mine only creaks with the conver on. a slight tightening of the screws did not help.
Sent from my SGH-T959V using Tapatalk
Somairotevoli said:
mine only creaks with the conver on. a slight tightening of the screws did not help.
Sent from my SGH-T959V using Tapatalk
Click to expand...
Click to collapse
Sorry to hear that. If it creaks with the cover on, then you should try the trick from the OP. My bezel was loose and creaking a little with the cover off. Sucks to be OCD...
Thanks for trying my method guys hahahahaah OCD FTW! Everybody thinks i'm a freak because i get so off kilter with such little things but, glad to see i'm not the only one who had supersonic hearing!
is this the only way to fix it? I am getting pissed of that my SGS is creaking..****ing **** build quality
I don't think its a good idea to do this. The paper prevent heat from dispersing when your phone heats up. If too much heat is generating while you play game or use your phone it might cause the battery to explode.
qpqpqp said:
I don't think its a good idea to do this. The paper prevent heat from dispersing when your phone heats up. If too much heat is generating while you play game or use your phone it might cause the battery to explode.
Click to expand...
Click to collapse
Ok i thought so also but there is no other solution to stop the darn creaking sound?!
Buy a case. Not being a smart ass. I bought a body glove case and have no creaky door issues. Plus it gives the phone a little more mass, makes it feel less cheap and not as slippery.
Sent from my SGH-T959V using xda premium
Exodian said:
Buy a case. Not being a smart ass. I bought a body glove case and have no creaky door issues. Plus it gives the phone a little more mass, makes it feel less cheap and not as slippery.
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
already have a tyre case, do u recommend any other case?
Lol, do you guys Chuck Norris grip your phones? I only get that sound when I squeeze pretty hard on my phone.
Also, putting a piece of paper there seems dangerous. My battery gets pretty hot sometimes when I play with it for too long (games, YouTube, etc.). I'm sure that heat would make the paper catch fire. Then again, I'm no fire expert. XD
It might just be the case I have, but I've never heard the phone make any creaking sounds. This is a simple fix though if you have the problem haha.
I have no idea how to take it off lol. Scared to apply too much pressure to break the phone.
If you pull up the seidio site, there is a tutorial on how to remove the case .
Sent from my HTC Sensation 4G using XDA Premium App
c19932 said:
I have no idea how to take it off lol. Scared to apply too much pressure to break the phone.
Click to expand...
Click to collapse
Lol its a little tricky.. you squeeze the top sides together near the bottom half, and push down while you pull on the bottom half...
Sent from my HTC Sensation 4G using XDA Premium App
thanks for the help. 1 more question... when the case is on, at the edge where the 2 components connect, is the top portion raised a tiny bit over the bottom portion on the right middle side? or is it supposed to be completely smooth (neither pieces are raised, just straight smooth)
c19932 said:
thanks for the help. 1 more question... when the case is on, at the edge where the 2 components connect, is the top portion raised a tiny bit over the bottom portion on the right middle side? or is it supposed to be completely smooth (neither pieces are raised, just straight smooth)
Click to expand...
Click to collapse
Well to me it supposed to be smooth. But yes, on my case it is raised abit
Normally I'm not one to obsess over this sorta thing but... My one month old TF seems to creak a lot when I press on the left edge (below the buttons) and either I'm going mad (quite possible) or it's getting worse...
If I grab it by the black bezel it's solid, it's when my thumb happens to rest on the bronze edge that it feels off and creaks audibly, I can seemingly push it back against the plastic back and feel it snap in or something. The other side has a tiny bit of it but it's nowhere near as bad... I'm just worried it might be stressing the screen or could loosen even more.
Mine doesn't feel very solid as well.It's a B50 model. I don't think there is any space between screen and glass. But a lack of strength is noticeable especially compared to iPAd2.
RAMBO29 said:
Mine doesn't feel very solid as well.It's a B50 model. I don't think there is any space between screen and glass. But a lack of strength is noticeable especially compared to iPAd2.
Click to expand...
Click to collapse
Agree..Price to Quality rato on TF...as well with anyother company. A reason why Apple commands a premium for QC.
I have exactly the same problem and think the creaks got worse since I bought my TF. Otherwise it's a great device but the browser is bad. And I spend 70% of the time on the tablet using it.
Mine developed the same problem down the left hand side after a couple of days of receiving it and just got worse and worse. sent it back after a week.
http://www.youtube.com/watch?v=4Zfqx9-VHuE
The replacement doesn't creak like the old one but if i squeeze the edges around the power/volume buttons the back moves in so there's some looseness. Right now i don't notice it in normal use and considering it took a month to get a replacement it's not worth sending it back. But i reckon at some point in the future i'll have to sendit in for repair.
I really like this device, and have to say i'm really impressed with the updates and that Asus seems to be listening to their customers - but the build quality in my experience is not good, i'd have happily paid an extra £50 for a more solid/robust build.
Impulses said:
Normally I'm not one to obsess over this sorta thing but... My one month old TF seems to creak a lot when I press on the left edge (below the buttons) and either I'm going mad (quite possible) or it's getting worse...
If I grab it by the black bezel it's solid, it's when my thumb happens to rest on the bronze edge that it feels off and creaks audibly, I can seemingly push it back against the plastic back and feel it snap in or something. The other side has a tiny bit of it but it's nowhere near as bad... I'm just worried it might be stressing the screen or could loosen even more.
Click to expand...
Click to collapse
Lots of answers here if you search.
I agree it's super annoying.
But to venture a guess........the 3G transformer has a SIM slot in the exact location of the creaky side, soooooooo, it must be the lack of the SIM slot and included hardware that makes this thing creak. it would have been nice if Asus had stuffed something else into the WIFI model to fill the void. This is my only complaint with this device.
Mine uused to creak only on the right side bottom quarter... but I've noticed that it's been creaky in other places lately too. :/ But then again, it's not really as bad as some of what I've heard, and it's definitely more solid than my HP (which of course, was not of the envy line).
Mine creaks in the same spot as yours (OP) but I have it in a pretty nice carbon-fiber case now and it's a non-issue.
ExploreMN said:
Mine creaks in the same spot as yours (OP) but I have it in a pretty nice carbon-fiber case now and it's a non-issue.
Click to expand...
Click to collapse
What is the Carbon Fiber Case you have? Where is it from?
wilx said:
What is the Carbon Fiber Case you have? Where is it from?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=17192114&postcount=283
Mine creaked and felt a little loose at first, then it stopped and everything feels really tight, i think messing with it one night i clicked something in place, the glass seems to sit more even as well.
Sent from my Transformer TF101 using xda premium
Hmm, thanks for the feedback guys... I guess if it ever gets worse I might put the warranty to good use. Right now it's sorta irksome but not bothersome enough for me to bother just yet.
I can sorta recreate the sound from that YouTube clip but only if I push back on the copper border the press in from the plastic back (ie pushing that section back and forth from both directions)... Meaning, if you obsess over it then it'll definitely drive you crazy and you'll probably even make it worse in the long run.
During normal handling mine definitely doesn't creak quite as much. I've sorta gotten into the habit of putting more of my hand around it when picking it up (when I've noticed it creak the most) versus just grabbing it by the very edge, which pretty much mitigates the issue. No creaking at all around the longer sides without the excess wrap around border so I don't even notice in a portrait orientarion (which is how I do most of my reading).
Honestly, if this continues to be my biggest complaint after a few months, I'll be pleased as punch. I just hope it doesn't get proggresively worse. I definitely wouldn't pay $100 more for a sslightly more solid feeling device without as many ports or forms of expansion (dock/microSD), but that's just me.
Likewise, if i don't obsess over it, it's not gonna bother me - not worth sending it off for a month at the moment. But at least we've got the warranty there if it gets worse.
anyone else have one like this that when you grab a certain way at the top, it actually feels like the entire body is shifting? like as if something is loose?
on many of teh GS3's i've noticed this. both of mine have it, but my boss's doesn't. I checked one in stock, it doesn't either.
the reason?
the battery compartment. on some GS3's (majority of what i've seen, actually) the battery compartment is like, a hair too big for the battery. therefore, when you grab the phone a certain way, the battery is actually popping out and moving a bit! this causes a weird body-shift.
some GS3's battery compartments are perfect size, and they're nice and snug on the battery (like my boss's) and there's no body shift.
so i took just a tiny piece of paper, not even folded, and i put one piece between the battery and the side on the left towards the top, and then on the top. no more body shifting!
Do not have this issue on mine.
I know other people who have them, will be checking as I come across them.
Thanks!
jayochs said:
anyone else have one like this that when you grab a certain way at the top, it actually feels like the entire body is shifting? like as if something is loose?
on many of teh GS3's i've noticed this. both of mine have it, but my boss's doesn't. I checked one in stock, it doesn't either.
the reason?
the battery compartment. on some GS3's (majority of what i've seen, actually) the battery compartment is like, a hair too big for the battery. therefore, when you grab the phone a certain way, the battery is actually popping out and moving a bit! this causes a weird body-shift.
some GS3's battery compartments are perfect size, and they're nice and snug on the battery (like my boss's) and there's no body shift.
so i took just a tiny piece of paper, not even folded, and i put one piece between the battery and the side on the left towards the top, and then on the top. no more body shifting!
Click to expand...
Click to collapse
Mine fits perfectly, noob. <3
Sent from my SCH-I535 using xda premium
Jayochs, glad to see you. I had the issue with my last gs3. Is there any way you can film any type of movement and be able to send to me? Compiling a list of issues with refurbished phones to send to an executive.
Sent from my SCH-I535 using Tapatalk 2
No issues here
Sent from my SCH-I535 using xda app-developers app
motion
hey man, go to settings >display> and untick"smart rotation" or go to settings>system> turn off "Motion" see if that solves your problem
papa54 said:
hey man, go to settings >display> and untick"smart rotation" or go to settings>system> turn off "Motion" see if that solves your problem
Click to expand...
Click to collapse
He's talking about physical pieces moving, not screen rotation.
Sent from my SCH-I535 using Tapatalk 2
TXI Kaze said:
He's talking about physical pieces moving, not screen rotation.
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
Samsung does seem to make" plasticy" flimsy devices but they seem to be getting better. I was reluctant to buy my s3 because of that fact but now that I have it I couldn't be happier with it. Best phone I have ever had by far.
mojitomcqueen said:
Samsung does seem to make" plasticy" flimsy devices but they seem to be getting better. I was reluctant to buy my s3 because of that fact but now that I have it I couldn't be happier with it. Best phone I have ever had by far.
Click to expand...
Click to collapse
I've had the same issue with other non "plasticy" phones. The problem is the poor refurbishing of the phones.
Sent from my SCH-I535 using Tapatalk 2
mines brand new, and so is my blue one.
i can't film it because it's literally like a milimeter shift of the body..when you "twist" the body ever so slightly, you can see the battery start to pop out in the top left corner. if you hold it, you can feel this shift..but the "twist" is how you can accurately re-create it every time. put your thumb on like the top left back corner and your other hand on the bottom and just somewhat twist it to see.
just using it like normal use, i would notice the shift as well. my Nexus 7 does the EXACT same thing, but the nexus 7 causes pressure on the screen, which makes the blacks look whiter because the screen seems to be pushing against the glass, or the back or something. my N7 shifts pretty badly lol so that's how i started noticing it on my S3.
mines still shifting even though I'm putting pieces of paper to try to settle the battery in. If you twist the frame slightly with the back cover off you can see the upper left corner of the battery pop out and you can push it back in.. so the frame is moving the battery around meaning the battery compartment just isn't a good fit with this body design on some phones.
which unfortunately created creaking and popping noises like mine has... kind of annoying now but at least it's not as bad as the battery door creaking on the rezound.
Sent from my Samsung Galaxy S3 using Tapatalk 2
When I hold the phone with the corner of it touching my palm it feels sharp and "poky". I've noticed it as soon as I took it out of the box, at first I thought it might be the protective stickers but no that wasn't it. The back doesn't seem to be perfectly flush with the sides at the corners, just enough to be a bit annoying when in hand.
Is anyone else noticing this? I'm coming from S4 which was really nice in hand, even with the "cheap" plastic.
yes a bit annoying to me and i am wondering whether i should put a case on it to fix this problem.
whoa2 said:
yes a bit annoying to me and i am wondering whether i should put a case on it to fix this problem.
Click to expand...
Click to collapse
I just opened my box and it's the first thing I noticed like a pinching on my palm. The back is too sharp and the side of the phone is inset. A big problem for me because it's annoying every time I use it! Arghh.. The other first impressions are great though! I'm gonna send mine back.. I guess.. Just not enjoyable to use it.
Never noticed anything like that. The white phone felt great in the hand. Just always feel like I'm going to drop it so I put on a case. Still feels awesome.
ptscon said:
When I hold the phone with the corner of it touching my palm it feels sharp and "poky". I've noticed it as soon as I took it out of the box, at first I thought it might be the protective stickers but no that wasn't it. The back doesn't seem to be perfectly flush with the sides at the corners, just enough to be a bit annoying when in hand.
Is anyone else noticing this? I'm coming from S4 which was really nice in hand, even with the "cheap" plastic.
Click to expand...
Click to collapse
I've had to alter how I would normally hold a phone of this size for it to feel comfortable in my hands. It's feels more angular then any other smartphone I've owned, although it doesn't look it.
On mine, the back lower left corner is a little sharp as if the back plate is poking my hands a little. But to the eye it looks OK.
Sent from my Nexus 5
I'm guessing you have the black one? White one is great on the hand
Sent from my Nexus 5
i have a white one
No issues with the black one here. Very smooth all round and comfortable to hold. Feels much nicer than the samsungs too me. And surprisingly feels nicer than the N4 did too.
Any injuries reported from this yet?
Sent from my Nexus 5 using Tapatalk
mjs2011 said:
Any injuries reported from this yet?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Lmao, definitely something a little minor to complain about. I also noticed the bottom right corner of the phone doing this depending on how I grip the phone. But when I check the corners to see if they are uneven or off they seem to be fine. I'll post up here if I end up in the ER with a pinch injury...