So you want to flash a ROM in BMM which in it's OP says can't be flashed with BMM?
Let's get to it then BMM look for the 2nd-init files in /system/etc/rootfs. But the CMDefy boot menu keeps 2nd-init files in /system/bootmenu/2nd-init. So when you install BMM on ROMs( flashable only with CMDefy), the necessary ramdisk files cannot be found and your phone bootloops. The trick here is to copy the files to /system/etc/rootfs so that BMM finds it's files and everything boot up swell.
Now,I've already made a CWM Flashable zip for CM10.1,CM10,Magic Mod.Just flash the respective ROM in BMM and then flash the respective Patch.zip and you'll be good to go.
How To Make Your Own Patch.zip
I've also attached a SamplePatch.zip so that if you want you can make your own flashable Patch.zip.The zip already contains the updater-script which will do the work for you.All you have to do is go into the ROM zip which you want to patch copy the files from system/bootmenu/2nd-init and paste them in the SamplePatch.zip's system/etc/rootfs folder.That's it your Patch is created.
Happy Multi Booting.
As always take a nandroid backup just in case.
Installation:
1.Boot into BMM Recovery.
2.Choose the system you want.
3.Wipe data/cache.
4.Flash ROM(Don't reboot yet)
5.Flash Respective BMM Patch.zip.
6.Flash GAPPS.
7.Reboot and enjoy!!!
Click to expand...
Click to collapse
Note:
On the 1st reboot just after flashing you won't see the green droid 3sec countdown of BMM but don't Panic it's there.It'll show up once you reboot.
Optional:
1.Install the BMM app from market to manage other things.
2.There is also the recovery_switch script(also taken from altered's PA3.15) in /bin which can be run to remove the BMM recovery and bring back the old CyannogenDefy Recovery but I personally haven't tested that yet.
Credits:
Wanggighost and lkrasner for the CM10.1 zip.
Alteredlikeness for his work on PA(from which I've taken lot of ideas) and his personal guidance.
Ravikirancg for his work on BMM patching from which although I didn't copy anything from but coincidently both our works are almost same.
I won't be responsible for any bricked devices.If you choose to do this you understand the risks.
Downloads
CM10.1 BMM Patch
See attachments for more
Thanks will try this..hope it works..never been able to boot CM10.1
nishant203 said:
Thanks will try this..hope it works..never been able to boot CM10.1
Click to expand...
Click to collapse
Well not sure if it will solve the blackscreen problem or for those who were unable to boot an any point as I haven't done anything to the graphic drivers and the black screen/boot problem seems to be related to that.But do let me know if something happens.
nishant203 said:
Thanks will try this..hope it works..never been able to boot CM10.1
Click to expand...
Click to collapse
it will not. the reason you get a black screen is because the drivers have an issue with (some of) our phones.
---------- Post added at 06:56 PM ---------- Previous post was at 06:45 PM ----------
deveshmanish said:
So I've been using CM10.1 for about 2 weeks now.I just love it.But the main problem with it was the black screen problem(which I've never faced luckily) due to which people were hesitant of installing it as the only ROM or daily driver.
A solution was found to flash CM10.1 over BMM as System 3 or above(Thanks to Ravikirancg).But for that we needed to have an ICS based ROM as our System 1.I personally didn't like to have an ICS ROM as my system 1 just so that I could be able to flash other ROMs over System 3 and above. But we couldn't install CM10.1 as System 1 and have other ROMs installed over system 3 and above.
So I decided to dig in a little and after a soft brick and multiple other hiccups I finally managed to boot CM10.1 over BMM as System 1.:victory::good:Additional benefit: No triple boot(bootloops) at reboots or zip flashes.
I've made all the edits and attached the modified zip file below.
As always take a nandroid backup just in case.
Note:
On the 1st reboot just after flashing you won't see the green droid 3sec countdown of BMM but don't Panic it's there.It'll show up once you reboot.
Optional:
1.Install the BMM app from market to manage other things.
2.There is also the recovery_switch script(also taken from altered's PA3.15) in /bin which can be run to remove the BMM recovery and bring back the old CyannogenDefy Recovery but I personally haven't tested that yet.
Credits:
Wanggighost and lkrasner for the CM10.1 zip.
Alteredlikeness for his work on PA(from which I've taken lot of ideas) and his personal guidance.
Download:
CM10.1 BMM Final
CM10.1 BMM Patch
PS:Updated the OP with CM10.1 BMM Patch.zip
I won't be responsible for any bricked devices.If you choose to do this you understand the risks.
Click to expand...
Click to collapse
instead of doing all of this, you can just install bmm from play store on stock ics. flash cm10.1 on system 1 and bmm will automatically force install itself (I dont see why what I said or my solution would require stock ics as system 1). and you will have copy over all the kexec files to the right place. I was trying to figure out a way to create a universal cmdefy to bmm and ss patch. but that was giving some trouble. there is a risky way to do it.. but risky. I will just update my post for all individual roms I guess. anyway nice to see ppl trying things out.. so thanks..
Ravikirancg said:
it will not. the reason you get a black screen is because the drivers have an issue with (some of) our phones.
---------- Post added at 06:56 PM ---------- Previous post was at 06:45 PM ----------
instead of doing all of this, you can just install bmm from play store on stock ics. flash cm10.1 on system 1 and bmm will automatically force install itself (I dont see why what I said or my solution would require stock ics as system 1). and you will have copy over all the kexec files to the right place. I was trying to figure out a way to create a universal cmdefy to bmm and ss patch. but that was giving some trouble. there is a risky way to do it.. but risky. I will just update my post for all individual roms I guess. anyway nice to see ppl trying things out.. so thanks..
Click to expand...
Click to collapse
Edit:I take that back.Seems i messed up somewhere.
And even i'm working on a universal patch.And i think the patch i've made is almost about complete.Will update it as i know more.
Sent from my MB865 using xda premium
have anyone with black screen problem try this .. i use to flash cm 10.1 last 2 week .. now im on PA .. if succeed i would like to go to cm 10.1 again
Sent from my MB865 using xda app-developers app
Update: OP refined and patches for CM10,MagicMod and tutorial with a sample patch.zip added...
Sent from my MB865 using xda premium
Its a good idea to mention and make separate patches for the kexec version and stock version for bmm. Also, if I remember, the cm10 rootfs files work for pa (not really required anymore as all the newer ones are bmm compatible.. but just for reference..)
Sent from my ME865 using Tapatalk 2
Ravikirancg said:
Its a good idea to mention and make separate patches for the kexec version and stock version for bmm. Also, if I remember, the cm10 rootfs files work for pa (not really required anymore as all the newer ones are bmm compatible.. but just for reference..)
Sent from my ME865 using Tapatalk 2
Click to expand...
Click to collapse
The CM10 files work on Magic Mod too.
Btw did you have any success with MIUI???
Sent from my MB865 using xda premium
deveshmanish said:
The CM10 files work on Magic Mod too.
Btw did you have any success with MIUI???
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Miui doesn't require any patch. It works just fine on hktw kernel. On any system..
Sent from my ME865 using Tapatalk 2
Ravikirancg said:
Miui doesn't require any patch. It works just fine on hktw kernel. On any system..
Sent from my ME865 using Tapatalk 2
Click to expand...
Click to collapse
How about AT&T???
Sent from my MB865 using xda premium
OP updated with patch for MIUIv5
Running ICS stock + CM10 BMM patch on sys5 successfully
deveshmanish said:
How about AT&T???
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
never tried. also the miui5 you posted, I really doubt that is miui5. some guy just put the miui5 launcher and changed settings in prop file. as of now I think wang is working on miui5.
Thanks fot the MIUI Patch .
Ravikirancg said:
never tried. also the miui5 you posted, I really doubt that is miui5. some guy just put the miui5 launcher and changed settings in prop file. as of now I think wang is working on miui5.
Click to expand...
Click to collapse
No Wang has actually released miui V5 on his site.
nishant203 said:
No Wang has actually released miui V5 on his site.
Click to expand...
Click to collapse
Oh! I didn't know about that.. Hate that "signing" on his site.. Can you share the link? (Not the angeeks one..)
Sent from my MB865 using Tapatalk 2
Ravikirancg said:
Oh! I didn't know about that.. Hate that "signing" on his site.. Can you share the link? (Not the angeeks one..)
Sent from my MB865 using Tapatalk 2
Click to expand...
Click to collapse
Go to MIUI V4 thread...i guess the link is on page 25..also you see the bugs other people have reported.
Hi
I have ics stock rom installed in first partition and SuperCharged v6 in 2nd.
Bbm is installed in first.
Can u plz help and give steps for my phone.
I want to experience jb but as bbm doesn't support it i didn't installed it yet.
Will appreciate your help.
Thanks
Sent from my MB865 using xda premium
farzii said:
Hi
I have ics stock rom installed in first partition and SuperCharged v6 in 2nd.
Bbm is installed in first.
Can u plz help and give steps for my phone.
I want to experience jb but as bbm doesn't support it i didn't installed it yet.
Will appreciate your help.
Thanks
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Which version BMM do you have???
Which Atrix do you have Asia,Att or some other??
Retail Asia has JB Leak which you can try if you have one.
When you say you wanna try JB, which ROM do you have in mind??
BMM is a recovery and recoveries are not android version specific.
May the -Mass times Acceleration-be with You...
Related
This is NOT a Custom ROM
Please do NOT ask for MODS or any such nonsense
What is it?
Click to expand...
Click to collapse
It is the official ICS AT&T update from OCT, 2012, UCLI3. I have just packaged two versions odexed and deodexed, you can choose to install whichever one you wish. Please choose only one.
It is untouched and requires full data wipe/system wipe. No root or busybox, see downloads for those.
I have provided these for those who like to run the official ATT/Samsung Stock offering.
Radio
Click to expand...
Click to collapse
This will update the radio to UCLI3.
Kernel
Click to expand...
Click to collapse
This will also update the to the stock UCLI3 Kernel (3.0.8-1127534). If you wish init.d support and boot-animation, see the downloads section for the modified ucli3 boot image. Please do NOT ask for bln and other non-sense. You can use my custom kernel Cymbaline for that.
Why odexed version?
Click to expand...
Click to collapse
You would need the odexed version (along with the recovery, separate download) to recieve any updates.
Why deodexed version?
Click to expand...
Click to collapse
If you wish to do custom mods, then this is the version you need.
Requirements
Click to expand...
Click to collapse
ʘ You would need clockwork mod recovery already installed. I have ONLY verified with the touch recovery. Please DO NOT complain if whatever recovery you are using cannot flash this properly. I will ignore all those posts.
ʘ ALWAYS ALWAYS check the md5sum.
ʘ Make sure you do a Nandroid backup, so you can restore your previous ROM. If you don't know what this means. STOP. I repeat for christ's sake STOP, you should not be flashing anything.
Downloads
Click to expand...
Click to collapse
ʘ [ROM][ODEXED][09-NOV-2012] See the installation instructions.
ATT-UCLI3-odexed-cwm.zip
ʘ [ROM][DEODEXED] See the installation instructions. Coming soon.
ATT-UCLI3-deodexed-cwm.zip
ʘ [ADDON][SU-BUSYBOX][09-NOV-2012] See the installation instructions.
busybox-su-pack-cwm5.zip
ʘ [ADDON][KERNEL][09-NOV-2012] See the installation instructions.
kernel-ucli3-sgh-i727-RD01-cwm.zip
ʘ [ADDON][RECOVERY] See the installation instructions. You needs to receive OTA updates. Coming soon.
Installation
Click to expand...
Click to collapse
This is pretty simple.
- Make sure you download the ROM to the phone. (and any other add-ons).
- Backup. Backup.
- Verify md5sum.
- Boot into CWM recovery.
- Format System.
- Wipe Data and Cache Partition.
- Select the downloaded zip.
- Install.
- [OPTIONAL] If you want root. Install the su-busybox zip in the Downloads section. YOU WOULD STILL NEED TO DOWNLOAD AND INSTALL AFTER BOOT SuperSU or Superuser from PLAY STORE.
- [OPTIONAL] If you want the modified boot-image to support boot anim and other init.d functionality (you need busybox see above, for this). Flash the modified kernel/boot-image zip from the downloads.
- Boot and wait for at least 5-10 minutes.
reserved
reserved
reserved second
reserved second
wow nyc
which one is the no ril new radio. i did not find the download link for that. thanks mohan
is this a new modem? if so can you pull it out and make a flash able zip, so users can update their modems without flashing the ics build
Many thanks
mjwhirly said:
is this a new modem? if so can you pull it out and make a flash able zip, so users can update their modems without flashing the ics build
Many thanks
Click to expand...
Click to collapse
Someone has already posted a flashable zip for the new radio. Id post it if i wasn't on my phone.
Sent from my SGH-I727 using xda app-developers app
Mohan, can I apply root and su to the odexed version?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
smully1 said:
Mohan, can I apply root and su to the odexed version?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Yes
Sent from my SAMSUNG-SGH-I727 using XDA
smully1 said:
Mohan, can I apply root and su to the odexed version?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Yes you can if notice second download has busybox and su flash that pack then download superuser from market
Sent from my SGH-I727 using xda premium
OK thanks. I wasn't sure if I needed the deodexed or not.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
smully1 said:
OK thanks. I wasn't sure if I needed the deodexed or not.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Nope simply flash and run like hell
Sent from my SGH-I727 using xda premium
Running the odexed rooted. Pretty smooth and good battery life so far. Not all the bells and whistles but very stable!
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Does stock have a way to turn off noise cancellation?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Pulled the modem and tried it. Data seems to be stuck on 3G even though I am in Seattle with 4G. Calls sound so-so, not great and not bad either. Data works, tested using web browser to open a web page.
Try at your own risk, make sure you've got a backup and know how to reflash your previous modem if needed.
Link: http://d-h.st/QRa
Seems the 3g thing was temporary, had 4g all day today.
Sent from my SGH-I727 using xda premium
Waiting for the DEodexed UCLI3 mohan man ... Please release it !!
Deodexed please mohan
mahanddeem said:
Deodexed please mohan
Click to expand...
Click to collapse
Deodex it yourself man
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Anyone have the stock recovery for UCLI3? Mohan posted comming soon, its been a while he may have forgotten.
Origin site http://www.591fan.com/thread-33954-1-1.html
What is this
This is MIUI for Retail Asian/ATT phones, this rom based on MIUI patch rom for Retail China stable branch project and re-packed for retail Asian/ATT phones.
This rom solved the battery drain issue(wake lock issue) when flashing official miui on retail asian/att phones.
Modded
As the stable miui branch not support the root permission function, I used the common SU binary, this means U need to install SuperUser or SuperSu to manager the root permission if U installed this rom.
There's no other extra mods, it is a pure "official" MIUI.
If U got FC after installing this rom, please DO A WIPE DATA/CACHE
How to install
This is for retain Asian/ATT only
- U should flash this rom on an ICS stock rom(I mean, your kernel should be 3.X, and your stock rom should be ics)
- If you're on CM10, flash via cm's recovery
If you're on other roms, Install bootstrap to flash this rom
- Wipe
- install this rom
- reboot
- enjoy it
WARNING
As always, I take no responsability for damaged phones, the user has full responsability. I am not responsible for any data loss and or bricked phones.I assume the user has read this README file and knows what he is doing。
DL:
http://pan.baidu.com/share/link?shareid=160092&uk=120553430
You rock buddy seriously !!! Keep up the good work
you are awesome
Thanks a lott for bringin this to our forum
we are really grateful to you
Can you make root for jb leak...
Because i cant stay without root..
No root for jb is preventing me from flashing jb
Sent from my MB865 using xda premium
shubham412302 said:
Can you make root for jb leak...
Because i cant stay without root..
No root for jb is preventing me from flashing jb
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
I have posted it in general section have a look
Sent from my ME865 using xda app-developers app
Its says clearly ATT, its just wanting to be safe then sorry haha, still getting used to a moto device , so then is A OK for at&t phones? I've been wanting this soooo bad haha (love Miui) but mad issues for at&t
Sent from a paranoid Atrix 2
MDMonster said:
Its says clearly ATT, its just wanting to be safe then sorry haha, still getting used to a moto device , so then is A OK for at&t phones? I've been wanting this soooo bad haha (love Miui) but mad issues for at&t
Sent from a paranoid Atrix 2
Click to expand...
Click to collapse
yes bro it is my friend tried this its perfectly sound lets appreciate wang the king :angel:
Sweet!
This is for JB 4.1.2 Asians and for 4.0.4 AT&T?
What's new in this? Have been using official miui for months..
Is it jb based or ICS?
Sent from my ME865 using Tapatalk 2
I believe this is a "fixed" version of the Official MIUI that is based on ICS from this thread (http://forum.xda-developers.com/showthread.php?t=1914096). It should have everything the other MIUI has plus the battery fix.
lilhaiti said:
I believe this is a "fixed" version of the Official MIUI that is based on ICS from this thread (http://forum.xda-developers.com/showthread.php?t=1914096). It should have everything the other MIUI has plus the battery fix.
Click to expand...
Click to collapse
But, this works on JB 4.1.2 HK/TW too?
well .... i can say battery life is great
but gettin fcs on each application i try to install
music, file manager and settings gives fc
So this is a working version of MIUI for MB865 AT&T?
can we use the overclock zips in this ROM ?!
Just flashed. Freaking awesome !
I was running NUMA. Removed Bootmenu, completely.
1. Flashed bootstrap as instructed on OP page.
2. Rebooted to recovery from bootstrap.
3. Reset to factory default.
4. Cleared dalvik cache.
5. Went to mounts, formatted /system. (I always do)
6. Flashed zip.
7. Added ATT APNS.
Freaking awesome.
On ATT net in California. Tested texts, and web so far. Both working
Flashed 10 minutes ago.
Gapps needed?
Sent from a paranoid Atrix 2
MDMonster said:
Gapps needed?
Sent from a paranoid Atrix 2
Click to expand...
Click to collapse
yes
---------- Post added at 03:59 PM ---------- Previous post was at 03:56 PM ----------
shardul.phatak said:
well .... i can say battery life is great
but gettin fcs on each application i try to install
music, file manager and settings gives fc
Click to expand...
Click to collapse
When I installed, I did factory reset, cleared dalvik cache and formatted /system.
Everything is running perfect.
Hey buddy.. Thanks for testing.. Couple if questions if u cud help me with..
1) Is it jb based or ICS ?
2) IS it specifically for ATT or can i flash my indian MB865 with it?
3) some screen shots will be truly appreciated..
Sent from my GT-S5830i using xda premium
mmotorwala said:
Hey buddy.. Thanks for testing.. Couple if questions if u cud help me with..
3) some screen shots will be truly appreciated..
Sent from my GT-S5830i using xda premium
Click to expand...
Click to collapse
I'll post some screens later
---------- Post added at 01:41 AM ---------- Previous post was at 01:39 AM ----------
So what about the MIUI settings apps and stuff? Like the ones that let you edit the statusbar. Would I be able to find them apps, install them and use them properly? Or no?
EDIT: Just did a google search and can't find those apks anywhere. Anyone know where I could get the MIUI apps?
Just trying to be helpful here, here is a faster way to get from stock one-click to JB goodness.....
After you flash to stock with antonx kernel reboot into recovery and flash bhundvens blastoff kernel, reboot recovery, now you should be in blue 5.0.2.8....flash the newest cm9, it will reboot automatically into recovery for you to flash a second time, but don't, instead flash a JB Rom, (I flashed chaos from dao) once it rebooted into recovery...jellybean recovery, I flashed the Rom plus gapps. Rom booted just fine.
So.....save a little time from completely flashing the whole rom, waiting for it to boot and rebooting into recovery just to do it again till you get where you want.....cheers
hopefully it saves you some time
************************just like everyone else says "I AM NOT RESPONSIBLE IF YOU BRICK YOUR PHONE"*****************
just one-click back and start over hee hee!!!!
If you're saying flashing a kernel with CWM 5.x and then flashing a JB ROM is faster, we all know that already.
You are not flashing the kernel first technically. What you are doing is converting the file system.
However I thought all the JB roms had the mtd conversion script included. If they dont I would ask the person that ported them to update it with that script. There should never be a reason to flash to ics then jb.
AnAznBoy9724 said:
If you're saying flashing a kernel with CWM 5.x and then flashing a JB ROM is faster, we all know that already.
Click to expand...
Click to collapse
Not everyone knows that... If they did there wouldn't be people asking how to flash or how to get back to stock or to root....
Sent from my SGH-T959V using xda app-developers app
ArmyofTracy said:
Not everyone knows that... If they did there wouldn't be people asking how to flash or how to get back to stock or to root....
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse
Getting back to stock and rooting are totally different subjects and shouldn't be asked in ROM threads anyways. Flashing the ROM are always in the OP.
I understand..... Thanks. You sure learned a lot since these posts....
What does aries mean? June 18
Where is the fast charge option June 2......
Sent from my SGH-T959V using xda app-developers app
limeaide said:
You are not flashing the kernel first technically. What you are doing is converting the file system.
However I thought all the JB roms had the mtd conversion script included. If they dont I would ask the person that ported them to update it with that script. There should never be a reason to flash to ics then jb.
Click to expand...
Click to collapse
If you go back to our early JB ROMs
It was said to flash cm 9 or be on
a ICS ROM first if coming from GB.
Its said to be different now...
I still don't trust it..out of habit and
because it has always worked..
If I one-click back to stock I always
flash cm9 first then flash JB.
Sent from my SGH-T959V using xda premium
ArmyofTracy said:
I understand..... Thanks. You sure learned a lot since these posts....
What does aries mean? June 18
Where is the fast charge option June 2......
Sent from my SGH-T959V using xda app-developers app
Click to expand...
Click to collapse
So now you're saying I can't make threads with questions I have? Okay... Can we get a mod to clean this thread up please?
AnAznBoy9724 said:
So now you're saying I can't make threads with questions I have? Okay... Can we get a mod to clean this thread up please?
Click to expand...
Click to collapse
Why do we need a mod
to clean up this thread...
Because you made a Remark
and he called you out.
He said thank you...
Relax its all good...
Sent from my SGH-T959V using xda premium
It's a useless arguement no one needs to see.
:banghead:
ArmyofTracy said:
:banghead:
Click to expand...
Click to collapse
\m/
first things first. I'm a noob. HAHA. but i'm willing to learn.
I recently rooted my phone by using chainfire's CF-AUTO-ROOT and it has stock recovery on it. Now, I want to install a custom recovery, specifically cwm recovery. How will be able to do this? Do I have to unroot then root again? a step by step info will be appreciated. thanks
First of all find a cwm file for ur device specific to the model u have on google. Flash it with Odin n u will have the recovery.
Sent from my GT-P3100 using xda app-developers app
Use the search function, read, profit.
Sent high from my SGH-M919
reply
vehvariya said:
First of all find a cwm file for ur device specific to the model u have on google. Flash it with Odin n u will have the recovery.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
done finding cwm file that's compatible with my tab
Flashing? not really that well with android terms yet. after clicking "pda" then selecting the cwm file, should I click start? is that what you meant by flashing?
I appreciate your help.
Yeah first go to download mode holding power and volume down button and select the file in the PDA section n just click on start. And wait till pass. appears on the Odin screen. That's it.
Sent from my GT-P3100 using xda app-developers app
Or could just download rom manager and do it from there. Mush easier for a noob
Sent from my GT-P3113 using xda app-developers app
reply
vehvariya said:
Yeah first go to download mode holding power and volume down button and select the file in the PDA section n just click on start. And wait till pass. appears on the Odin screen. That's it.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
Got that! followed exactly what you said and poof - custom recovery. may i ask if you installed a custom rom in your tab 2? and if so, what rom is it?
reply
mymeatb18 said:
Or could just download rom manager and do it from there. Mush easier for a noob
Sent from my GT-P3113 using xda app-developers app
Click to expand...
Click to collapse
just saw it... at least i know that i can do that and at the same time i want to be famillaw with odin any suggestion on custom roms?
My using the cm 10.2 recent build. Works very well.
Sent from my GT-P3100 using xda app-developers app
rom?
vehvariya said:
My using the cm 10.2 recent build. Works very well.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
I also would like to install cm 10.2. is it stable? I tried searching and I found pac rom and if i'm not mistaken 3 custom roms are installed into 1 rom.
I also would like to ask if it is really necessary to wipe all data before installing a new rom? and if so, would apps like titanium backup pro would be able to backup every single app or information that is in my tab/
Yeah u have to wipe cache and dalvik cache. 10.2 nighties r stable. No issues with me.
Sent from my GT-P3100 using xda app-developers app
i use cm10.1.3rc2, it's good!
just release at 2013-9-5
cm10.1
impliu said:
i use cm10.1.3rc2, it's good!
just release at 2013-9-5
Click to expand...
Click to collapse
I would like to give that a try. do you have any links on where I can find instructions on how to install that? also links on the files that are needed. thanks.
cm10.2
vehvariya said:
Yeah u have to wipe cache and dalvik cache. 10.2 nighties r stable. No issues with me.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
can you post a link on how to install cm10.2 along with the files that are needed to be downloaded. thanks.
Hey there.. Here is the procedure to install cm 10.2
First get into the recovery mode and follow the steps.
1. First do a factory reset.
2. Go to advanced menu not clear dalvik cache.
3. Wipe cache partition.
4. Get the latest nightly for ur device from here http://get.cm and flash it.
5. Download the Google apps for 4.3 from here http://goo.im/devs/BaNkS/GApps 4.3 (choose the first link) and flash it.
6. Reboot device.
U will have cm 10.2.
Sent from my GT-P3100 using xda app-developers app
superSUnoob said:
just saw it... at least i know that i can do that and at the same time i want to be famillaw with odin any suggestion on custom roms?
Click to expand...
Click to collapse
Your thread is changing direction but I can't resist commenting anyway. If your tablet is rooted, stock I don't think you will see big benefits to a custom ROM. For other tablets I use like the Kindle, Nook and N7 custom roms can make a huge difference. I'm running CM 10.? Or variants of that on those devices. My most used tablet is this 2.7 with stock ROM. If you must try another ROM, I'd suggest a sick based ROM that is deodexed with sound or visual enhancements. Also, changing to a noon, Touchwiz launcher will make big differences. GOOD LUCK!
P.S. quess what a ROMaholic might be.
ROMaholic
king200 said:
Your thread is changing direction but I can't resist commenting anyway. If your tablet is rooted, stock I don't think you will see big benefits to a custom ROM. For other tablets I use like the Kindle, Nook and N7 custom roms can make a huge difference. I'm running CM 10.? Or variants of that on those devices. My most used tablet is this 2.7 with stock ROM. If you must try another ROM, I'd suggest a sick based ROM that is deodexed with sound or visual enhancements. Also, changing to a noon, Touchwiz launcher will make big differences. GOOD LUCK!
P.S. quess what a ROMaholic might be.
Click to expand...
Click to collapse
just noticed that my thread is changing direction
I would like to give that "sicked based ROM" a try. any links to those ROMs? and if im not contented, I can revert back to stock rom right? or can I try the "sicked based ROM" and stock ROM thru dual booting?
reply
vehvariya said:
Hey there.. Here is the procedure to install cm 10.2
First get into the recovery mode and follow the steps.
1. First do a factory reset.
2. Go to advanced menu not clear dalvik cache.
3. Wipe cache partition.
4. Get the latest nightly for ur device from here http://get.cm and flash it.
5. Download the Google apps for 4.3 from here http://goo.im/devs/BaNkS/GApps 4.3 (choose the first link) and flash it.
6. Reboot device.
U will have cm 10.2.
Sent from my GT-P3100 using xda app-developers app
Click to expand...
Click to collapse
thanks for this info. I will try this before I try the "sicked based ROM" (evil laugh) :laugh:
Hate to be a pest but I cannot get ICS to install.
Tried this one: gapps-ics-20120429-signed.zip
but when I update with it, my phone reverts back to Gingerbread.
I followed the video that clears data and cache,
flashes, reboots, pulls battery out, clears again,
and flashes the rom a second time.
Just cannot get ICS to work with the above ROM zip file.
Can you point me to a webpage that has the ROM and procedure?
Thanks much.
Carl
cwmoser said:
Hate to be a pest but I cannot get ICS to install.
Tried this one: gapps-ics-20120429-signed.zip
but when I update with it, my phone reverts back to Gingerbread.
I followed the video that clears data and cache,
flashes, reboots, pulls battery out, clears again,
and flashes the rom a second time.
Just cannot get ICS to work with the above ROM zip file.
Can you point me to a webpage that has the ROM and procedure?
Thanks much.
Carl
Click to expand...
Click to collapse
Sorry to tell you this but those are Google apps (gapps) I'm going to give you a link for an ics rom ok.
Sent from my SGH-I997 using XDA Premium 4 mobile app
---------- Post added at 03:29 AM ---------- Previous post was at 03:20 AM ----------
Try this one http://forum.xda-developers.com/showthread.php?t=1661690
Sent from my SGH-I997 using XDA Premium 4 mobile app
You need to install both the ROM and the Gapps package.
UnhoIy said:
You need to install both the ROM and the Gapps package.
Click to expand...
Click to collapse
I found 2 ROMs on that webpage:
DOWNLOAD
-New and Future Builds:
http://www.mediafire.com/?fjkxprrz50izph7
INFINITUM
-Old Build
http://www.mediafire.com/?49tmm9mp7wsgmr9
http://d-h.st/CrV -this one works on phones
Click to expand...
Click to collapse
I assume its best to use the New Build?
Also, when I flash the Gapps package, should it be done while flashing the above ICS ROM?
Thanks
Carl
cwmoser said:
I found 2 ROMs on that webpage:
I assume its best to use the New Build?
Also, when I flash the Gapps package, should it be done while flashing the above ICS ROM?
Thanks
Carl
Click to expand...
Click to collapse
That rom have the gapps integrated so you don't need to flash ics gapps.
Sent from my SGH-I997 using XDA Premium 4 mobile app
That worked great!!
I have ICS installed now.
Can you recommend me a ROM for Jelly Bean?
Thanks much
Carl