My vox keeps on restarting when the microsd card is inside, and when it's outside its just doesn't getting to the home screen. It's getting stuck on the second HTC logo.
It is after I did soft reset to my device after I used the SDA_ApplicationUnlock and the new comm manager style (list):
http://forum.xda-developers.com/showthread.php?t=355490
I've tried hard reset:
http://www.modaco.com/index.php?showtopic=255861&mode=threaded
And it doesn't seam to work... ):
When I push all the 3 keys altogether when the VOX is off the phone doesn't even turn on, just pushing only the power button turning the VOX on.
So, how can I rescue my VOX?
By the way, I soft reset my VOX by pulling outside the SIM slot and then pushing it back inside.
to hardreset you have to :
1. turn off the phone
2. press and keep pressed the 2 softkeys
3. press power button for about 2 sec
4. release the power button, but keep the other 2 keys pressed about one more sec
5. a black screen will aprear with some white text asking for hardreset confirmation.
good luck
Nothing happens… only when I press just the power button the phone turning on.
Maybe I don't know what are the two softkeys?
Help!
the sokt keys are the 2 keys between the home and back keys and the d-pad, ie the keys above "1" n "3"
hth
Well, I was wrong about the two softkeys. But its still doesn't seem to work.
When I follow the instruction above the phone is turning on, as usual, but nothing else happens (the phone still gets stuck at the second HTC logo).
when you press the power button even if the screen lights up keep the pw button pressed for 2 sec then release it but keep the other 2 but. pressed
Still doesn't work, its continuing to the screen with the "windows mobile" logo.
I had the same promblem, fixing by removing SIM and go ahead
1. turn off the phone
2. press and keep pressed the 2 softkeys
3. press power button for about 2 sec
4. release the power button, but keep the other 2 keys pressed untill...
5. a black screen will aprear with some white text asking for hardreset confirmation.
Greetz BAUr SImon
Hi It still doesnt seem to work with me.
Because i have the same problem and i tried to do all the things from above.
This is bad. man my phone doesnt work.
That's strange, if the phone can go as far as the second htc screen I thought it should be able to hard reset.
Also make sure usb cable is not plugged in while you try to hard reset. I just tried it and I don't get the white text on black screen when I have the cable in.
ן succeeded in doing a HR a couple of days ago, but I forget to write it down here.
The instructions are:
1. Take out the battery of 5 sec.
2. Put in the battery.
3. Press the two soft keys (above 1 and 3), and don't stop pressing.
4. Press the power button. The sec the green light blink, next to the HTC logo, you remove your finger from the power button (this is what no one told me).
5. You are asked to press the SEND button to confirm the HR.
lastOne said:
to hardreset you have to :
1. turn off the phone
2. press and keep pressed the 2 softkeys
3. press power button for about 2 sec
4. release the power button, but keep the other 2 keys pressed about one more sec
5. a black screen will aprear with some white text asking for hardreset confirmation.
Click to expand...
Click to collapse
lastOne said:
when you press the power button even if the screen lights up keep the pw button pressed for 2 sec then release it but keep the other 2 but. pressed
Click to expand...
Click to collapse
are you sure nobody told you that ?
Sorry, let me rewrite myself:
I didn't fully understand this instruction, and if I didn't understand it good enough maybe other people would understand it as me. So I wrote a farther instruction.
Hello there!
I have a weird problem with my Tytn2. When i try to turn it off by pressing for 5 seconds the power button, it displays on the screen the regular message, that power will be turned off and i may lose data if not saved. Press ok and the power seemes to be turned off completely, because the green led won't flash. But, when i press the power button trying to turn on the device, it doesn't boot for entering the system, it just suddenly display the Orange Logo and above it a tiny black bar with the proper icon showing me that i have no phone signal at all (see picture). By pressing the "x" in the right side of the bar, the logo dissapear and appears the home screen, but the same icon is showing that i have no signal at all. I have to go to the comm manager, press once the Phone symbol which is already blue (enabled), and it sticks on the Flight mode. Press once again the Phone, and i have phone signal. The fact is that the phone it doesn't turn off completely and it hangs in a weird state (sleep mode ?). Please help me if you can! Thank you very much !
Welcome to forums
Have you tried a hard reset?
Instructions here:
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Resets
Hope it helps,
Please respect forum rules no double posts.
http://forum.xda-developers.com/showthread.php?p=5183356#post5183356
On that note thread closed.
hello xda,i have come across a issue with my one s after a year of use.my phone is not booting up at all.i have tried the power +vol down key combo but that is also not working.it has been some how got bricked i think i have also not installed any rom on it.just pure stock rom.i had though of installing cm11 on it but its not working at all.when i am connecting it to my wall charger the orange led is on and that is it.i am using a blackberry bold 9790 and really getting tried of it.plz help guys.:crying::crying:
Press power & vol.down for 15-20 seconds.
Press And Hold The POWER Button Until Touch Navigation Buttons Start Blinking, Then Press And Hold One Of Navigation Buttons Till Phone Screen Blinks And Navigation Buttons Stop Blinking, Then Release All Buttons And Phone Should Be Reboot.
i saw a shortcut like on the internet *#2663*#(don't remember exactly) and tried it. it showed my touch screen version.I accidentaly pressed the "update firmware" button.It said updating... do not turn off the phone.i waited for sometime but ended up removing the battery.now when i switch on my phone the touch screen does not respond.i switched of my phone and tried pressing the volume up+power+home button which shows "RAM DUMP mode (ARM9 mode)" and freezes in the Samsung screen.if I try pressing the volume down+home+power buttons it shows a yellow triangle with the android symbol and below it says downloading... and freezes. i don't know what to do now....please help me out!!!..
You should be extremely cautious not to press that update button. That kills the touch sensitivity.
Since u have done that & have access to download mode, I can only advice u to flash GT-S5670 stock firmware(froyo/gingerbread) by odin v4.38. That may help, atleast u can try it.
& when flashing is successful & still touch doesn't work then...I guess u have to visit Samsung care centre:sly:.
Hi guys, I just got a uleFone U007, and having a black screen problem.
The thing is that, after every few hours when I press the power button to unlock the phone, the screen stays black .
I am able to blindly unlock it by swiping on the screen, and I can feel that the screen in responding in background.
The navigation buttons are also responding (phone vibrates on touch).
However the screen still says black. And if I restart it (keep power button pressed), the screen is coming back, but again, only for few hours.
Do you know of any solutions for that? For me it seems like a software issue rather then a hardware problem. A GUI crash...
Also if any ideas on how to further investigate that will be helpful.
Thanks
gciutac said:
Hi guys, I just got a uleFone U007, and having a black screen problem.
The thing is that, after every few hours when I press the power button to unlock the phone, the screen stays black .
I am able to blindly unlock it by swiping on the screen, and I can feel that the screen in responding in background.
The navigation buttons are also responding (phone vibrates on touch).
However the screen still says black. And if I restart it (keep power button pressed), the screen is coming back, but again, only for few hours.
Do you know of any solutions for that? For me it seems like a software issue rather then a hardware problem. A GUI crash...
Also if any ideas on how to further investigate that will be helpful.
Thanks
Click to expand...
Click to collapse
Are you on the latest update? is your phone rooted?