[Q] Xperia TIpo Won't boot up - Sony Xperia Miro, Tipo (Dual), J, E

So I rooted my Tipo, I installed CWM on it. Than I flashed Cyanogenmod on it. But when I pressed on reboot in CWM, it won't boot. When I try to boot it up, it vibrate but nothing showing up.
I tried to reflash stock on it with Flashtool but it get stuck at 0%.
Any ideas to fix it? Thanks !

LMH1998 said:
So I rooted my Tipo, I installed CWM on it. Than I flashed Cyanogenmod on it. But when I pressed on reboot in CWM, it won't boot. When I try to boot it up, it vibrate but nothing showing up.
I tried to reflash stock on it with Flashtool but it get stuck at 0%.
Any ideas to fix it? Thanks !
Click to expand...
Click to collapse
You sure you followed EVERY step of the Cyanogenmod installation instructions exactly?
Forgetting even one step, or doing it work, can cause these boot issues.
For stock firmware, please post the log of the flashtool here, so we can figure out what's wrong.
On first thought it sounds like you haven't got a valid loader.sin though. You can download a good one somewhere here on the forums but at the moment I'm too lazy to search it for you. If you find it you should replace the loader.sin in the FTF file, or replace it after the files been loaded for flashing (before you connect your phone), in that case they are in the %Your_flashtool_folder_here%/firmwares/prepared folder.
If you can't figure it out, post the log, like I said. Then we'll help you further.

Xperia Tipo
Dragoboss said:
You sure you followed EVERY step of the Cyanogenmod installation instructions exactly?
Forgetting even one step, or doing it work, can cause these boot issues.
For stock firmware, please post the log of the flashtool here, so we can figure out what's wrong.
On first thought it sounds like you haven't got a valid loader.sin though. You can download a good one somewhere here on the forums but at the moment I'm too lazy to search it for you. If you find it you should replace the loader.sin in the FTF file, or replace it after the files been loaded for flashing (before you connect your phone), in that case they are in the %Your_flashtool_folder_here%/firmwares/prepared folder.
If you can't figure it out, post the log, like I said. Then we'll help you further.
Click to expand...
Click to collapse
So I followed all the steps correctly. But thanks for your respons, but I got it to work. Tried to flash every single stock rom that there was and one worked

Dragoboss said:
You sure you followed EVERY step of the Cyanogenmod installation instructions exactly?
Forgetting even one step, or doing it work, can cause these boot issues.
For stock firmware, please post the log of the flashtool here, so we can figure out what's wrong.
On first thought it sounds like you haven't got a valid loader.sin though. You can download a good one somewhere here on the forums but at the moment I'm too lazy to search it for you. If you find it you should replace the loader.sin in the FTF file, or replace it after the files been loaded for flashing (before you connect your phone), in that case they are in the %Your_flashtool_folder_here%/firmwares/prepared folder.
If you can't figure it out, post the log, like I said. Then we'll help you further.
Click to expand...
Click to collapse
Ik zie dat je van NL bent, ik ben van BE

LMH1998 said:
Ik zie dat je van NL bent, ik ben van BE
Click to expand...
Click to collapse
That's right, I am, but forum language is supposed to be English
I believe it's in the rules of XDA.
Well, I'm glad you got it to work, if you have any more issues, I will be happy to answer them, and if I can't, someone else here probably will

Phone wont turn on
Dragoboss said:
You sure you followed EVERY step of the Cyanogenmod installation instructions exactly?
Forgetting even one step, or doing it work, can cause these boot issues.
For stock firmware, please post the log of the flashtool here, so we can figure out what's wrong.
On first thought it sounds like you haven't got a valid loader.sin though. You can download a good one somewhere here on the forums but at the moment I'm too lazy to search it for you. If you find it you should replace the loader.sin in the FTF file, or replace it after the files been loaded for flashing (before you connect your phone), in that case they are in the %Your_flashtool_folder_here%/firmwares/prepared folder.
If you can't figure it out, post the log, like I said. Then we'll help you further.
Click to expand...
Click to collapse
Bro, can you help me ? I am in the same situation as him but i cant completely figured it out ? Would really love if you can help me

Related

[Q] Cwm says can't open su-2.3.6.3-efgh-signed root zip Bad

Hi All, Yes i am a noob and this is my first post. i have read all previous posts regarding this matter but havn't been able to find anything. I have managed to S-Off my phone (Hboot 1.17.1111) through revolutionary and put Cwm 4.1.0.4 on it but when i try to flasn su-2.3.6.3 Zip it says, finding, opening, then Can't open/sdcard/su-etc.zip (bad) Installation Aborted
I have tried downloading zip from different locations and latest ones but to no avail.
Any ideas Please.
My phone is Taiwan model dose this make any difference?
Cheers.
Try to flash it again.
I've had the same problem but after insisting a 2nd time, the flash was Ok.
Supertool V3 works wonders!
Hi, Thanks for your advice, i tried it 10 times and still nothing! I read lots of posts on other forums etc people having same prob but no one seems to know what the prob is. Anyways i found this Supertool V3 program you run on your computer plug in your phone and prees a enter and it does it all for you the whole kit and kaboodle and it worked first time.
Yay, i am now rooted.
Cheers,
10 times
I didn't know this tool so I couldn't advise you to use it....But if that's good now, excellent for you !!!
Why not use the latest version of Superuser as opposed to that ancient build...
http://goo-inside.me/superuser/Superuser-3.0.7-efghi-signed.zip
First off, do this.
Second, the problem you're having is likely because the su.zip file you're trying to flash is bad. Just because you downloaded it doesn't mean you got a clean copy. Files get corrupted during the download process or in the transfer to your SD card.
CWM is basically saying "Look dude, this file isn't going to do what you think its' going to do so I'm not going to install it and eff up your phone. You're welcome!"
So again, get the newer version of SU linked above. And if you have this problem again with SU or anything in the future, the first thing to do is get a fresh copy of the file and start over.
I tried both methods above but my GT-P1000 reboots to cwm recovery. Tried wiping data etc.
Can anyone help please?
This is the HTC Sensation forum, go to your devices forum and ask there

X8 rooting problem

Hello everyone. As the title says I have rooting problem on my X8 device.
My x8 was already rooted before and i had had custom rom on it.
Few days back I wanted to put another rom, while doing that X8 got bricked.
I fixed it via PC Companion and everything is alright until i try to root it.
(Following links are in text form, I just made this account and can't make links jet.)
SuperOneClick:
When I click root, first error I get is this:
i.imgur.com/JjY36qY.png
After clicking Yes I get new window popping up saying.
Unknown error(0xe00022b) (last 3 latters change every time i try)
I click OK and it starts rooting. After few sec, it freezes like this:
i.imgur.com/b9vQD3X.png
All I get here is text on right blinking every few seconds.
x8toolbox:
Realizing that this won't work i tried via x8toolbox
There i get error:
i.imgur.com/poydVDJ.png
(Image is low qualtiy, but that is maximum I can get from that program.)
I don't know what to do. I was searching forums for days in hope to resolve my problem and had no luck.
Please, if anyone know anything about this problem I would appreciate your help.
Thank you in advance.
XedoK said:
Hello everyone. As the title says I have rooting problem on my X8 device.
My x8 was already rooted before and i had had custom rom on it.
Few days back I wanted to put another rom, while doing that X8 got bricked.
I fixed it via PC Companion and everything is alright until i try to root it.
(Following links are in text form, I just made this account and can't make links jet.)
SuperOneClick:
When I click root, first error I get is this:
i.imgur.com/JjY36qY.png
After clicking Yes I get new window popping up saying.
Unknown error(0xe00022b) (last 3 latters change every time i try)
I click OK and it starts rooting. After few sec, it freezes like this:
i.imgur.com/b9vQD3X.png
All I get here is text on right blinking every few seconds.
x8toolbox:
Realizing that this won't work i tried via x8toolbox
There i get error:
i.imgur.com/poydVDJ.png
(Image is low qualtiy, but that is maximum I can get from that program.)
I don't know what to do. I was searching forums for days in hope to resolve my problem and had no luck.
Please, if anyone know anything about this problem I would appreciate your help.
Thank you in advance.
Click to expand...
Click to collapse
Y U no posted this In X8 forums
wanna thank xda? here
Gogeta said:
Y U no posted this In X8 forums
wanna thank xda? here
Click to expand...
Click to collapse
I'm new to posting here on forum. Thought that this is forum board for problems like this.

[Q] Accidentally wiped my system.. Help!!!

1st of all, i am a beginner. Just brought my android ics phone last month. I also rooted my phone by the help of my friend last week. But yesterday i was trying to restore factory settings. But i accidentally wiped my system. And now my phone wont boot. It stuck in BootScreen. Nothing happens then. I dont have the backup of my rom. what to do now ??? Please help!! Sorry for my bad English & Thanks in advance who wanna help me
..
What recovery are you using? Even if you wiped the phone you should still have it running. All you need to do is reboot in recovery mode. Hard to tell you how as I dunno what the phone is.
Before that you'll need to download your stock firmware and put it on the root directory of your SD card if you have one, so that once in recovery you'll actually have something to flash.
If the phone doesn't have a SD slot, then you'll need to use a recovery tool on your PC to flash it.
Right now shut the phone down, remove the battery, find some guides specific about your phone, and read them carefully. There's a reason why we're using recoveries. First thing you should have done is to backup your stock firmware somewhere on your computer or on the cloud, and make sure you knew how to use it if something like that was to happen... Little late for that now.
When you'll know what to do, just mind that you still have enough battery to flash the stock ROM. Come back to ask help here if there's something you don't understand. Good luck!
faisalsarkar7 said:
1st of all, i am a beginner. Just brought my android ics phone last month. I also rooted my phone by the help of my friend last week. But yesterday i was trying to restore factory settings. But i accidentally wiped my system. And now my phone wont boot. It stuck in BootScreen. Nothing happens then. I dont have the backup of my rom. what to do now ??? Please help!! Sorry for my bad English & Thanks in advance who wanna help me
..
Click to expand...
Click to collapse
No problem. Just install this partition manager free. It is perfectly adapted for windows 8. And you are offered a variety of options which can swap/merge/separate new partitions. With a very easy-to-understand instructions, everything is perfect!
Thanks for kindly reply
ModRQC said:
What recovery are you using? Even if you wiped the phone you should still have it running. All you need to do is reboot in recovery mode. Hard to tell you how as I dunno what the phone is.
Before that you'll need to download your stock firmware and put it on the root directory of your SD card if you have one, so that once in recovery you'll actually have something to flash.
If the phone doesn't have a SD slot, then you'll need to use a recovery tool on your PC to flash it.
Right now shut the phone down, remove the battery, find some guides specific about your phone, and read them carefully. There's a reason why we're using recoveries. First thing you should have done is to backup your stock firmware somewhere on your computer or on the cloud, and make sure you knew how to use it if something like that was to happen... Little late for that now.
When you'll know what to do, just mind that you still have enough battery to flash the stock ROM. Come back to ask help here if there's something you don't understand. Good luck!
Click to expand...
Click to collapse
I am using TWRP recovery in my Chinese Branded SymphonyW35, Do i have to download my stock rom ?
faisalsarkar7 said:
1st of all, i am a beginner. Just brought my android ics phone last month. I also rooted my phone by the help of my friend last week. But yesterday i was trying to restore factory settings. But i accidentally wiped my system. And now my phone wont boot. It stuck in BootScreen. Nothing happens then. I dont have the backup of my rom. what to do now ??? Please help!! Sorry for my bad English & Thanks in advance who wanna help me
..
Click to expand...
Click to collapse
Get original ROM and set him from a computer or through bootlouder
Thanks for kindly reply
lykosha said:
Get original ROM and set him from a computer or through bootlouder
Click to expand...
Click to collapse
I don't know how to flash my stock rom. Please refer me to a forum containing tutorial about Flash a Rom.....
Well that's the kick, is it? Most of what I found through a quick search was in foreign language... I do english, french, and a little spanish, but that's it...
I did find THIS quite easily though... My bet is, start from there to find infos... That's all I can do right now to help you, sorry!
http://forum.xda-developers.com/showthread.php?t=2379132
Edit : and this one too : http://forum.xda-developers.com/showthread.php?p=42938085
Mind you they may not be exactly what you're looking for, but you'll surely find your way to an answer if you take some time to read through these.
faisalsarkar7 said:
I don't know how to flash my stock rom. Please refer me to a forum containing tutorial about Flash a Rom.....
Click to expand...
Click to collapse
What telephone, model, do you have? On the model of vehicle find a theme. All must be written up there.

i unlocked the bootloader, taking ages to (re)boot

Is this normal? *_*
If not, how do I fix this?
Sorry if wrong section, kinda urgent.
I unlocked my device and I noticed only the first boot is slowly than others, even in the stock ROM. Try to flash the FTF file for your firmware and tell us the results.
I had something similar but after uploading ftf file it disappeared.
It should not be a problem flashtool can do it right.
it didn't even recognize the phone on flashmode for so long. It finally did and I flashed the previous (.12) ftf file. It's still taking ages to boot right now. Sigh. I'll try relocking the bootloader.
EDIT: IT WORKED. ****. THANK ****ING GOODNESS.

Hello all, having some trouble with making an FTF file

Hello all, first off I must apologise as I am not sure if this is the right place to be posting this or not, if it is not the right place I will move it off to the correct place as soon as possible, anyways on to the issues im having, I recently restored my TA partition and with it my bootloader, I didn't realise this would break the rom I was running on it beforehand, but not to worry, flashtool can fix that, in a sudden rush of crap to the brain though I did not for a moment think that they'd have changed how flashtool was done in regards to FTF files and as a result im a bit stuck at the moment, downloading with xperifirm works fine and what have you but creating the FTF via the flashtool bundler part doesn't work, it will just stop responding the moment I click create, I am not sure why this is and I am running the latest version with no luck, if anyone can help me out of this even if only a little I will be very grateful, many thanks in advance for taking the time to read this in any case.
Most likely you have an old version of flashtool. Install 0.9.23.1 and then replace the x10flasher.jar with the one provided at the bottom of the page : http://www.flashtool.net/downloads_windows.php
Hopefully that will solve the issue.
roobns said:
Most likely you have an old version of flashtool. Install 0.9.23.1 and then replace the x10flasher.jar with the one provided at the bottom of the page : http://www.flashtool.net/downloads_windows.php
Hopefully that will solve the issue.
Click to expand...
Click to collapse
Hello, apologies for the delay, this worked a treat! many thanks.

Categories

Resources