The Unofficial AOKP 4.2.2 ROM for Motorola Razr HD XT926 will not boot on my phone. Using TWRP rom-slot1 Any solutions?
Yachter99 said:
Using TWRP rom-slot1 Any solutions?
Click to expand...
Click to collapse
Sounds like you are using SafeStrap which has a form of TWRP but is not a true recovery. You need an unlocked bootloader & custom recovery (TWRP or CWM) to install it.
coolloser said:
Sounds like you are using SafeStrap which has a form of TWRP but is not a true recovery. You need an unlocked bootloader & custom recovery (TWRP or CWM) to install it.
Click to expand...
Click to collapse
Thank you! I was unclear on whether an unlocked bootloader was required for this unofficial build (As the unofficial build of CM10.1 for Razr HD does not required one).
Related
I have a asus tf300t running 4.2.1 with unlocked bootloader and root. I am running twrp v2.5.0.0 and I have already made backups of my apps. I am trying to install a custom rom. Preferably PACman rom but at this point any will do. When I try to flash the rom it go through the whole process then reboots but does not get past the asus splash screen.
What is the problem? Is it that the new bootloader does not accept any custom roms, if so how do I downgrade to 4.1? Otherwise I am open to any advice.
Holyman8388 said:
I have a asus tf300t running 4.2.1 with unlocked bootloader and root. I am running twrp v2.5.0.0 and I have already made backups of my apps. I am trying to install a custom rom. Preferably PACman rom but at this point any will do. When I try to flash the rom it go through the whole process then reboots but does not get past the asus splash screen.
What is the problem? Is it that the new bootloader does not accept any custom roms, if so how do I downgrade to 4.1? Otherwise I am open to any advice.
Click to expand...
Click to collapse
You must be on Jelly Bean 4.2.1
with the Asus Stock bootloader 10.6.1.8 and TWRP Recovery patched 2.4.4.0
or
Bootloader 10.1.15.3 and TWRP patched 2.5.0.0
You will find all versions of Stock firmwares and Stock kernels here
And the TWRP recoveries here
philos64 said:
You must be on Jelly Bean 4.2.1
with the Asus Stock bootloader 10.6.1.8 and TWRP Recovery patched 2.4.4.0
or
Bootloader 10.1.15.3 and TWRP patched 2.5.0.0
You will find all versions of Stock firmwares and Stock kernels here
And the TWRP recoveries here
Click to expand...
Click to collapse
I am currently running the 10.1.15.3 bootloader and TWRP 2.5.0.0, yet it still does not finish flashing the ROM. I even tried to flash a more simple stock based ROM, ie. black beans 8. This did not work either. It went through the twrp flash and restarted but when it got to the ASUS boot up screen it simply stopped. I waited about 10 minutes for it to possibly load however it never did. So I am restored back to my stock and am awaiting any further help.
Holyman8388 said:
I have a asus tf300t running 4.2.1 with unlocked bootloader and root. I am running twrp v2.5.0.0 and I have already made backups of my apps. I am trying to install a custom rom. Preferably PACman rom but at this point any will do. When I try to flash the rom it go through the whole process then reboots but does not get past the asus splash screen.
What is the problem? Is it that the new bootloader does not accept any custom roms, if so how do I downgrade to 4.1? Otherwise I am open to any advice.
Click to expand...
Click to collapse
In the OP for PACman rom it says you must be on android 4.1.1 to flash his rom. You need to pick a rom for your 4.2.1. I am also on 4.2.1 and run CROMI 4.6.6 with no issues. Have also succesfully tried the Energy rom. Read carefully the OP for the rom's you are considering and make sure they are for 4.2.1
Holyman8388 said:
I have a asus tf300t running 4.2.1 with unlocked bootloader and root. I am running twrp v2.5.0.0 and I have already made backups of my apps. I am trying to install a custom rom. Preferably PACman rom but at this point any will do. When I try to flash the rom it go through the whole process then reboots but does not get past the asus splash screen.
What is the problem? Is it that the new bootloader does not accept any custom roms, if so how do I downgrade to 4.1? Otherwise I am open to any advice.
Click to expand...
Click to collapse
I am having the same problem! I am running 4.2.1 and im trying to install blackbean 8 using twrp 2.5.0.0. I factory reset in twrp and wipe cache and dalvic. I then install the the rom and reboot but it will not go past the first boot screen with the tegra logo in the bottom right. It always flashes for a second but then does nothing. I have even tried cm 10.1 and it does the exact same thing. I am still able to restore back to stock. This is my first time flashing a rom so any help would be appreciated!
For the latest [ROM][4.2.2][ OFFICIAL] PAC-man v23.0.0 [OC up to 1.7GHz][New Update 22/06/2013], if you read the installation process, you need to be 4.1.1 and not 4.2.1 and also you need installed custom recovery for JB 4.1 BL !
For the latest [ROM]ASU-JellyBean-Hydro 8 (6/29/13)Liquid Butter..- Tf300 -Official 10.6.1.15.3 Base, you need to be on 4.2.1 and 10.6.15.3 bootloader
and you will see to the changelog:
...not sure if any bootloader will work...
Click to expand...
Click to collapse
Hope it's helpful for you
Hey all,
Its been a while since I have messed around with my XT926 and I am having some trouble flashing a 4.1.2 ROM on it. What I've done so far is to RSDLite to a 4.4.2 build (one that is still compatible with boot loader unlock) and unlocked the boot loader. I was having trouble getting a recovery to flash other than epinters cwm and twrp 2.8. I tried flashing nexesue v3.6 in both recoveries but am stuck on the Motorola symbol on blot. If I RSDLite back to a 4.1.2 build can I then flash an older recovery and then the ROM?
EDIT: phone is also rooted using towelroot.
Any help is appreciated.
DID you try twrp 7.1.0?
lysdexik said:
Hey all,
Its been a while since I have messed around with my XT926 and I am having some trouble flashing a 4.1.2 ROM on it. What I've done so far is to RSDLite to a 4.4.2 build (one that is still compatible with boot loader unlock) and unlocked the boot loader. I was having trouble getting a recovery to flash other than epinters cwm and twrp 2.8. I tried flashing nexesue v3.6 in both recoveries but am stuck on the Motorola symbol on blot. If I RSDLite back to a 4.1.2 build can I then flash an older recovery and then the ROM?
EDIT: phone is also rooted using towelroot.
Any help is appreciated.
Click to expand...
Click to collapse
See my post, had problem to install Nexesque too, but had success with specific CWM version. Also try to wipe all and flash boot.img as the op in Nexesque has stated.
http://forum.xda-developers.com/showpost.php?p=55752257&postcount=170
I currently am running CleanROM 3.0.3 Inheritance, android 4.1.1 bootloader 10.4.2.18-20121122 and twrp 2.3.1.0. I would like to be running KatKiss Lillipop.
As far as I can tell, if I can update my bootloader to the 4.2 version I should be able to flash the latest twrp and then KatKiss, but I need help to update my bootloader.
SpoonThief said:
I currently am running CleanROM 3.0.3 Inheritance, android 4.1.1 bootloader 10.4.2.18-20121122 and twrp 2.3.1.0. I would like to be running KatKiss Lillipop.
As far as I can tell, if I can update my bootloader to the 4.2 version I should be able to flash the latest twrp and then KatKiss, but I need help to update my bootloader.
Click to expand...
Click to collapse
Use fastboot to install the new Stock ROM by flashing the system blob. Then reboot and install the 2.8 TWRP, then the KatKiss ROM.
Solved
cmendonc2 said:
Use fastboot to install the new Stock ROM by flashing the system blob. Then reboot and install the 2.8 TWRP, then the KatKiss ROM.
Click to expand...
Click to collapse
Thanks! Worked out great. In case anyone else has a similar problem, I followed this guide by pjc21, flashed the 10.6.1.27 blob directly from 10.4.2.18, and then flashed the latest TWRP and then KatKiss. Worked out great!
Hi,
I am currently running Zombi-pop 5.02 B4 and has TWRP 2.8.7 Kang on my TF700T. I would like to have nvflash access, can I downgrade to a JB stock version that allows such access? and if yes which stock rom and which boot loader?
many thanks
satnile said:
I am currently running Zombi-pop 5.02 B4 and has TWRP 2.8.7 Kang on my TF700T. I would like to have nvflash access, can I downgrade to a JB stock version that allows such access? and if yes which stock rom and which boot loader?
Click to expand...
Click to collapse
You don't need to downgrade, you can install the flatline recovery, pull your blobs, then reinstall TWRP.
_that said:
You don't need to downgrade, you can install the flatline recovery, pull your blobs, then reinstall TWRP.
Click to expand...
Click to collapse
Really, this is helpful. I was under the impression that a stock JB boot loader is required for nvflash to work. I shall give it a try and report back.
Many thanks
I have successfully done the nvflash access and generated the blobs for my TF700T and stored them in triplicates. My question now is that I have been left with AndroidRoot 10.6.1.14.4 bootloader and a primitive flatline recovery, can I flash TWRP Kang 2.8.6.0 back without problem?
many thanks once again.
Congrats! Yes, flash TWRP kang, reboot, then flash the stock bootloader from here: http://forum.xda-developers.com/showpost.php?p=55238386&postcount=3
Reboot
All is good
Flatline CWM recovery couldn't flash the zips for bootloader and TWRP Kang, so I flashed the TWRP img via fstboot first, then booted into TWRP recovery and flashed the bootloader zip and it worked fine, no bricking whatsoever.
Please I have a MOTOROLA DROID RAZR MAXX HD with kk Bootloader unlocked n rooted, stock 4.4.2 ROM and system version 183.46.15.XT926.Verizon.en.US. Whenever I install any kinda custom ROM (cm11&12, Liquid smooth kk n lp, Resurrect lp) it installs successfully but when it reboots after the flashing process, it gets stuck on the boot screen after the M logo. This happens to all the custom ROMs I have ever flashed. Please what am I not getting right here? Although it came with Mokee ROM when I bought it and I changed it to cm12 which worked well until I changed it back to stock kk and when I later wanted to return to the cm12 that was when the problem started. Pls help me. I use TWRP v2.6 recovery. Thanx in advance...
1. Flash the latest recovery, http://d-h.st/users/dhacker29/?fld_id=42955#files
2. Clean flash (know what this means before you attempt to install a new rom) the rom (CM 12.1, not 12, I presume) you would like to install from your SD card. http://www.cmxlog.com/12.1/xt926/
3. GAPPS can be found here: http://d-h.st/users/dhacker29/?fld_id=27426#files
I had to clean flash CM11 before flashing CM12 to get it up and running. Good luck.
Thanx very much. Pls do u mean I should flash cm11 first before upgrading to 12.1? I just downgraded my system version from .15 to .10 and I tried the ROMs, only unified cm11 SNAPSHOT build worked. Others only got stuck at the boot animation. Any further help pls?
Sent from my DROID RAZR HD using XDA Free mobile app
1. Revert back to stock KK entirely. Easiest way would be to download the RAZR HD Utility http://forum.xda-developers.com/showthread.php?t=2474393
2. Flash TWRP 2860. Then wipe everything except sd card. Reboot into recovery again.
3. Flash latest cm12.1 from sd card
Works for me.
Sent fra min DROID RAZR HD via Tapatalk
Thanx a lot. I eventually dirty flash the cm12.1 on the snapshot and it worked finally!!! Thanx so much for your help everytime:thumbup::thumbup:
Sent from my DROID RAZR HD using XDA Free mobile app