Hi friends is that had the Rom froyo 2.2 installed and my phone is not wanted was on EDGE or 3G then go pass the Cyanogen Rom 7.2 and I was the same and decided to go back to froyo but was using a copy of nandroid and ise from the buttons do not use the open recovery ise rather they live and install froyo but now it turns out the boot logo that says froyo and stops and turns and leaves can help me now please reovery out nor open. nothing. before oppressing button volume up + on, but now get a triangle and phone off!
: Llanto:: Llanto:: Llanto:: Llanto:: Llanto:: Llanto:: Llanto:: Llanto:: Llanto:: Llanto:: Llanto:: Llanto:: Llanto:: Llanto:: Llanto:: Llanto:: Llanto:
Related
new problem
I upgraded my s200 to room 2.63.90 and now my phone is blocked. When i turn it on there is no radio rom version. In windows phone has no gsm signal, is very slow & orange led is on. I cant conect it to activeSync, i tried to load other version of radio or rom but...
damm, i have no lock with upgrading
please help
hjuuh,
it is back..alive
i went to bootlander and upload new rom
it would help if you post this stuff on the original thread, not all over the place !
http://forum.xda-developers.com/showthread.php?t=282066
Help!
I meet the same problem as you , Can you tell me how to solve it? Thank you for you help!
SPEEEED said:
hjuuh,
it is back..alive
i went to bootlander and upload new rom
Click to expand...
Click to collapse
joyride said:
I meet the same problem as you , Can you tell me how to solve it? Thank you for you help!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=1050696&posted=1#post1050696
What you need to do is the following:
1) Switch on the mobile
2) Connect it to USB
3) While stuck on the Dopod splash screen, press the Comm Manager button (lower one on the left) and while pressing it push the soft reset button.
4) DO NOT release the comm manager button until you see the boot loader screen (full of colours)/. This takes approx. 5 secs.
5) When in bootloader screen, start the ROM update that you downloaded from the Dopod website (executable).
6) This will start the normal ROM flash program
7) Enjoy!
Thank Kta.
Thank you for your help! I upgrade a new Radiorom 2.47.11 and it work well!
elantra_no1 said:
http://forum.xda-developers.com/showthread.php?p=1050696&posted=1#post1050696
What you need to do is the following:
1) Switch on the mobile
2) Connect it to USB
3) While stuck on the Dopod splash screen, press the Comm Manager button (lower one on the left) and while pressing it push the soft reset button.
4) DO NOT release the comm manager button until you see the boot loader screen (full of colours)/. This takes approx. 5 secs.
5) When in bootloader screen, start the ROM update that you downloaded from the Dopod website (executable).
6) This will start the normal ROM flash program
7) Enjoy!
Thank Kta.
Click to expand...
Click to collapse
Hello:
As usual I tried to do some upgrades and getting stuck on the "DOPOD Enjoy Mobility" screen. The 818 Pro does not want to shut down or connect to the PC. When I try to run a good ROM - RUU_Prophet_220734_2207114_024721_NVID.exe, I get "ERROR [260] : UPDATE ERROR".
I tried to reset pressing the Comm Manager + Power button + Green Phone button nothing happens.
I tried to reset by holding Camera Button + COMM Manager + stylus in the reset" and hold it for 30 seconds it goes blank and then the HTC screen comes up and then leads to screen that displays below:
IPL 2.15.0001
SPL 2.15.0001
GSM 02.19.21
OS 6.6.6.666
DOPOD
Enjoy Mobility
Any assistance to get me going is again is really appreciated. Please help.. no phone now....
Brenda
Got it to reset to Bootmode...had to recharge battery
Hi All,
After lot of frustration, pulled the battery and put it back, did not restart the dopod instead plugged it in to recharger and went to bed... this morning with a fully charged battery pressed the camera button and the Power button simultaneously.... got me in to the tri-color screen.... made me so happy...
Flashed with PDA Viet ROM and got it up and running just in time to go to work.... Thanks folks..
Brenda
Hope that hasnt put you off flashing haha, wot rom you gonna try?
PDA Viet ROM
Hi Brenda,
I also facing the same problem in my 818 model (showing tri-color).
Please let me know, how to resolve the problem?
From where to download the firmware, and how to update the flash.
Thanks
C.Mohane
Brenda_Sheldon said:
Hi All,
After lot of frustration, pulled the battery and put it back, did not restart the dopod instead plugged it in to recharger and went to bed... this morning with a fully charged battery pressed the camera button and the Power button simultaneously.... got me in to the tri-color screen.... made me so happy...
Flashed with PDA Viet ROM and got it up and running just in time to go to work.... Thanks folks..
Brenda
Click to expand...
Click to collapse
hi! i am from the philippines.I bought a secondhand tytn II last october. My sim card worked with this phone and so I didnt know that the unit was sim locked to a certain network until I changed the sim card a few days ago. Ive read from different sites that I can do the sim unlocking of my phone personally but I'm really new to this thing and I'm afraid that I'll "brick" my phone. I already upgraded my phone to wm6.1. I read form you site an instruction on how to unlock the phone but I think it works for wm6 phones only.Here are some information about my phone:
R 1.65.17.56
G 25.83.40.02W
D 3.28.00.00
KAIS130 MFG
SPL-1.0.Olipof
CPLD-8
If you know of any way to unlock a wm6.1 phone, please help me...or if there's none, please just send me instructions on how I can change my os to wm6 so that I can follow the instructions below:
Thank u in advance!
Btw,here are the instructions I mentioned:
Instructions
============
1. Make sure you installed HardSPL as follows: power off and then press power on while keeping camera pressed, this will enter the so called bootloader mode and you see a tri-color screen (Red, Green, Blue). You should see "SPL-1.0 OliPof" on the second line in the top left corner. You can exit this mode by means of a "soft reset": press the reset button with the stylus.
2. Make a note of the radio version that is currently installed. You see the version strings in the splash screen which appears soon after power on (e.g. "R 1.27.14.09"). Since we will flash a special radio in step 5 you need to flash back your original radio in the last step. You can download radio roms from XDA devs here: http://forum.xda-developers.com/showthread.php?t=349375
3. Connect PC and Kaiser with a USB cable and keep it connected until the last step.
4. Power on the Kaiser and let it boot into Windows Mobile. On the PC make sure the activesync icon is green
5. After you unpacked the download you see directories "step1" and "step2". Go into "step1" and run KaiserCustomRUU.exe. This will flash the special patched radio rom. Follow the instructions until it is finished.
6. Power off your Kaiser and insert a 'strange' SIM, i.e. a SIM from another provider than the one your phone is locked to.
7. Once Windows Mobile has booted up it will show a window called "Simlock" and a textbox where you can enter a 8-digit unlockcode. Now perform a soft reset by pressing the reset button *but* at the same time keep the camera button pressed. If you did it well you will be back in bootloader mode and you see the tri-color screen. The best technique is to press and hold the camera button first and then shortly press the reset button with the stylus.
8. On your PC go into the "step2" directory and run "kaiser-simunlocker.exe". If all went well you will see the unlockcode on your monitor and your Kaiser is being restarted automatically.
You should see this:
=== Kaiser Sim Unlocker (c)2008 by jockyw2001
=== Donations happily accepted, paypal to [email protected]
Your Unlockcode = 12345678
[] Done, enter the unlockcode
[] And then flash your original radio
Press Enter to exit
9. Once Windows Mobile has booted up it will again show the "Simlock" window. Now enter the 8-digit unlockcode and your phone is permanently SIM unlocked
10. Download the original radio from http://forum.xda-developers.com/showthread.php?t=349375 to the "step3" directory on your PC and flash it with KaiserCustomRUU.exe
That's all folks
Now you can look forward to some other great tools which I will release soon: "Kaiser SuperCID" and "Kaiser Radio Dumper"
Enjoy and ... donate to keep R&D going! Thx!
JockyW
please don't double post
thread closed
Hi... Im very new to this site... But always have read good advice... Ive rooted my Touch pro 2 I think... I have put the wifi tethering on and it works... How do I tell if I rooted the phone correctly... is it by putting the wifi tethering on my phone.ll Is that how I know my phone is rooted correctly? Plz Help!
You Hard-SPL Windows Mobile, Rooting is terminology for Android.
[Resources] Flashing your First GSM Rhodium Rom (For Noobs)
That's for GSM if you have CDMA the link is provided in above.
How to varify you have Hard-SPL:
*Go into BootLoader Mode (do a Soft Reset while holding the "volume down" key on the left side of the device. Keep holding the "volume down" key until you see tricolour screen which is the bootloader mode, then release it) and verify the screen shows 0.85.OliNex, which is the HardSPL version*
Taken from above link.
Hey guys,
HTC Touch Pro P4600 (AT&T) RAPH110 GSM
This phone was sitting in my drawer for a while not being used, I had gotten it to power on at first then it shut off and won't even turn on. It will currently do two things:
Vol up+power = 3 vibrates, then nothing
Vol down+power = rainbow flash screen
says :
Security Unlocked
SPL-1.90.OliNex
MicroP-Raph (LED) v13
MicroP-Raph (KEY) v5
PSOC-Raph STAGE_CVT v0x36
Serial or if I plug it into USB it will switch to USB.
I have tried reflashing a few diff roms, reflashed hardspl, tried a few diff radio versions but it still stays in the same state. I was going to try an OEM image but 90% of the download links are broken and entering the S/N @ HTC just gives me a broken download link. Spent many hours reading around and trying to find files.
If anybody can help me save it from being tossed in the garbage would be much appreciated
Thank you