I have a Jamin Running WM6 OS 4.0.0.4. I tried to change the OS but somehow it got corrupted. Now its going to the blue screen showing
IPL 2.13.0001
SPL 2.13.0001
GSM 02.07.20
OS 4.0.0.0
and then it halts. I habe tried everything to take it into Bootloader mode but its not going to the Bootloader mode. I connected it to the charger, pressed the Camera Button, soft reset it holding the camera button but its not going anywhere, it just goes blank then i have to take out the battery and put it again. Maximum it goes to the black screen with white test asking just to format. I want to take it to the Bootloader colored screen so that i can connect it to USB and install the OS again. I have tried everything but its not going to bootloader colored screen. Please help.
Hello:
As usual I tried to do some upgrades and getting stuck on the "DOPOD Enjoy Mobility" screen. The 818 Pro does not want to shut down or connect to the PC. When I try to run a good ROM - RUU_Prophet_220734_2207114_024721_NVID.exe, I get "ERROR [260] : UPDATE ERROR".
I tried to reset pressing the Comm Manager + Power button + Green Phone button nothing happens.
I tried to reset by holding Camera Button + COMM Manager + stylus in the reset" and hold it for 30 seconds it goes blank and then the HTC screen comes up and then leads to screen that displays below:
IPL 2.15.0001
SPL 2.15.0001
GSM 02.19.21
OS 6.6.6.666
DOPOD
Enjoy Mobility
Any assistance to get me going is again is really appreciated. Please help.. no phone now....
Brenda
Got it to reset to Bootmode...had to recharge battery
Hi All,
After lot of frustration, pulled the battery and put it back, did not restart the dopod instead plugged it in to recharger and went to bed... this morning with a fully charged battery pressed the camera button and the Power button simultaneously.... got me in to the tri-color screen.... made me so happy...
Flashed with PDA Viet ROM and got it up and running just in time to go to work.... Thanks folks..
Brenda
Hope that hasnt put you off flashing haha, wot rom you gonna try?
PDA Viet ROM
Hi Brenda,
I also facing the same problem in my 818 model (showing tri-color).
Please let me know, how to resolve the problem?
From where to download the firmware, and how to update the flash.
Thanks
C.Mohane
Brenda_Sheldon said:
Hi All,
After lot of frustration, pulled the battery and put it back, did not restart the dopod instead plugged it in to recharger and went to bed... this morning with a fully charged battery pressed the camera button and the Power button simultaneously.... got me in to the tri-color screen.... made me so happy...
Flashed with PDA Viet ROM and got it up and running just in time to go to work.... Thanks folks..
Brenda
Click to expand...
Click to collapse
Dear all,
I have two big problems!
1st on is that my phone HD2 won`t start. It just freeze on the white screen with HTC logo and ROM numbers.
2nd is that when I tried to put it in bootloader mode it won`t go. I tried to press down volume key and power key but it happen`s teh same like in the 1st paragraf.
Can you maybe help me???
Thanks in advance.
take the battery out and do a hard reset. Hold volume up and down at the same time and press power button.
I also tried to do that and nothing happens! It just show`s white screen with htc logo.
My HD2 won't go to bootloader tri color screen when I press and hold the VOLUME DOWN then Press and hold the POWER button, but the phone starts normaly.
I already flashed the HSPL3 and nothing wrong happened. But when I tried to check if the HSPL status, the bootloader don't work.
My HD2 is T-Mobile
rsimiao said:
My HD2 won't go to bootloader tri color screen when I press and hold the VOLUME DOWN then Press and hold the POWER button, but the phone starts normaly.
I already flashed the HSPL3 and nothing wrong happened. But when I tried to check if the HSPL status, the bootloader don't work.
My HD2 is T-Mobile
Click to expand...
Click to collapse
Rsimiao, any luck getting your phone into bootloader mode? I have the same problem.
Have same problem
my hd2 won t go in bootlaoder mode, impossible to see spl and wont be flash by hspl 3
impossible to hard reset it
its saying that sd card fail to copy something
is there a solution ??
no usb loading in bootlaoder
Hi I have problem with loading usb in bootlaoder mode.....
When I turn on the phone everything is ok working fine
I'm trying to put a new Rom but I cant because can not find usb
can anyone help me please.....
Dont go to Bootloader (Tricolor Menu)
Hello HD2 Experts,
yesterday i wanted to reboot my HTC HD2 with Android (SD) on it, and after this it hanging on the HTC logo and cant boot.
It goes only to the MAGLDR but not to the Bootloader ( Tricolor Menu) if i press VOLUME DOWN AND POWER...
I installed via USB FLasher on MAGLDR the Windows 7 Phone and it was working perfectly without problems (Just Wlan/Wifi dont working). After this i tried to install 5 different NAND Android on my HD2 and every of this is hanging on this HTC Logo!!! I am sure that all this 5 were working before this...
My Problems:
1. Cant install (NAND) Android.
2. Cant join to the BOOTLOADER (Tricolor).
3. On WIndows 7 PHone no WLAN working.
I'm done with the nerves!!! Can anybody help me?
Best Regards, Mike
Take bettery out, then try again
it will work
i tried EVERYTHING! but it dont help
and battery too!
Having the same problem I have SPL-3.03 HSPL & trying to downgrade to SPL 1.66 but won't go into Bootloader. I've tried an 8gb, 4gb & now 1gb card the file has been renamed in the root to LEOIMG.nbh but just get the tri colour screen. Pressing reset button & holding end call & Vol down button.
This is the right file to rename from HTC?
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
Make sure you are not using the USB cable while trying to enter bootloder. I had the same problem, but once unplugged the cable all was fine.
I'm having a similar problem. I reflashed to the HSPL, no problem. I then used the Rom UPdate Utility, which claimed it had updated my ROM to version 2 (although it took a fraction of the 10 minutes, it said it would). When I now try to boot the phone to install the rest, doesn't matter how much I hold the power key (which I presume is the 'make call' key, as that powers the phone up), it refuses to do anything other than boot to the O2 Welcome screen. I'm noticing the replies aren't very helpful here. Is this what I can expect for the whole forum? As a newbie, I can't make posts on the developers forums, so I can't ask them if they've come across this before. It seems a bit pants, to be honest!
HTC HD2 won`t go in to bootloader mode
Junks666 said:
... now 1gb card the file has been renamed in the root to LEOIMG.nbh but just get the tri colour screen.
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
Click to expand...
Click to collapse
Hi Junks,
The THREE COLOUR SCREEN is BOATLOADER this is FIRST BOOT LOADER or (I Think) the name is H-BOOT. You have to correct ROM for HTC HD2, but CMIIW the rom is for HTC HD2 T8585 (WWE) with 516 Internal Memory. Is your HD2 this Model or another Model famous with name TMOUS (T-Mobile Edition) with 1024 Internal Memory. I believed if you still have tricolor screen easier to "wake up" your phone.
Im haveing the same problems please someone help... a Demonoid invite code is all I have to offer here
DJ Legless said:
I'm having a similar problem. I reflashed to the HSPL, no problem. I then used the Rom UPdate Utility, which claimed it had updated my ROM to version 2 (although it took a fraction of the 10 minutes, it said it would). When I now try to boot the phone to install the rest, doesn't matter how much I hold the power key (which I presume is the 'make call' key, as that powers the phone up), it refuses to do anything other than boot to the O2 Welcome screen. I'm noticing the replies aren't very helpful here. Is this what I can expect for the whole forum? As a newbie, I can't make posts on the developers forums, so I can't ask them if they've come across this before. It seems a bit pants, to be honest!
Click to expand...
Click to collapse
Is your problem solved ? Hold power key (Red) (Hang Up key) and Volume Down key simultaneously. what is you see on the screen ? if its three color RGB ... you are safe. I will advise whats next.
cheers up
x1123 said:
Is your problem solved ? Hold power key (Red) (Hang Up key) and Volume Down key simultaneously. what is you see on the screen ? if its three color RGB ... you are safe. I will advise whats next.
cheers up
Click to expand...
Click to collapse
No that is not the problem I can not get into the bootloader at all, I use to do it before, so after trying the vol. Down key I tried useing many other combinations without any luck, its as if the default bootloader is gone!
kris29440 said:
No that is not the problem I can not get into the bootloader at all, I use to do it before, so after trying the vol. Down key I tried useing many other combinations without any luck, its as if the default bootloader is gone!
Click to expand...
Click to collapse
HD2 is most great device. what is actually happened. You can brief here what you did before and some background of your HD2, what u have flashed in and what is inside, the more clue probably will help others to point a good thing for you. If No boot loader is the device totally "death"
x1123 said:
HD2 is most great device. what is actually happened. You can brief here what you did before and some background of your HD2, what u have flashed in and what is inside, the more clue probably will help others to point a good thing for you. If No boot loader is the device totally "death"
Click to expand...
Click to collapse
I usely use SD Builds, but I installed DFT_LEO_MAGLDR113_DAF,HSPL4,MAGLDR_CWM_Recovery_v3.0.2.5_for_NexusHD2_135M,NexusHD2-Gingerbread_V2.7_NAND__Android-2.3.4__update and wifi-calling-htcleo-gb-20110518 ( Yes I just copy and paste the file names lol) My phone was working fine (Not sure about the bootloader/Tri-color screen) untill a few days ago my android build boots in safe mode I did find a remedy for that and thats by pressing and holding the Call (green), Home and Windows keys down while the android boots, but I have to do that all the time now. What I am trying to do is restore it back to fatory settings. Oh yeah BTW the AMAGLDR bootloader dose boot and also CWM Recovery but while In the aMAGLDR I have to hold the back key to press vol. up and down other wise it will keep moveing back to the top of the list (Its been like that sence I installed MAGLDR) but I do not have any problems with the vol up and down key in any other programs. I am also able to use USB Flasher and any other mode besides Windows Mobile Device Center (Windows 7). I also tried gettng into Sync by installing Windows phone 7 (witch installed fine with USB flash (Useing MAGLDR) but not luck with syncing back to WM6.
x1123 said:
Is your problem solved ? Hold power key (Red) (Hang Up key) and Volume Down key simultaneously. what is you see on the screen ? if its three color RGB ... you are safe. I will advise whats next.
cheers up
Click to expand...
Click to collapse
Hi. I've tried that combination of keys & I just get the O2 Welcome screen. The only key combination that works is when I power up with the Vol Down key held. I then get the tri-colour screen.
Don't know if this helps but.....
When I get the tri-colour screen, I have the following text:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0X05
CotullaHSPL 0x40
So here it what happened :
NOTE : My power button was broken! The phone automatically restarts when the battery is plugged in. I tried the CRC spray fix but it didnt help.
1. Was on Gingerbread, but decided to do a fresh flash from UCJI6 (Eclair) and reinstall everythg .
2. Got a blue screen on the captivate while running the JI6 ODIN. Instead of researching online, I just removed the cable and the battery! (My fault)!
3. Obviously phone bricked! Ordered a usb-jig from usbjig.com, but it doesnot go into download mode probably because of the broken power button.
So the only response I am getting from the phone is when I plug in the USB and press the volume-up button which is when it shows 7 red lines starting with RST_STAT = 0x1 and a small asterix after the lines.
So what are my options now? Pls suggest (except JTAG, thats my last option)
Got into download after loads of trial and error ! I dont even know how! Anyways off to flashing again!
hello everybody!
i'm today user on this page,not excellent in english sorry,
i have a problem that i followed some ways to reborn my htc hd mini by using MTTY and GOLd card but with no response,
i would like to show information about my cell
when i press power and vol- tri colored screen appears with the following:
PB92100
SPL-1.07.0000
ENGID 0ₓF
PCBID 0ₓ00
MicroP(LED) 0ₓ05
TP SYNAPTICS
but when i turn only power button the following appears:
first white screen with htc green logo then
nand id:0ₓ5500bcec maker=0ₓxec device=0ₓbc
press VOLUME UP for RECOVERY
press VOLUME DOWN for FASTBOOT
flash_read_image:failed (319 errors)
ERROR: Cannot read recovery header
flash_read_image: failed (1984 errors)
ERROR; Cannot read kernel image
ERROR: Couldd not do normal boot.Reverting to fastboot mode.
ENTERING FASTBOOT MODE
udc_start( )
that was of course after i flashed CM 7 and i tried to make upgrade to CM 9 from ROM manager inside the phone
the operation was stable until 99% and freezed my phone for half an hour,then i took the battery off and OOPS
PLEASE anyone can help?