Database Info

Google Nexus 4 Screen Protector Steinheil Dual

Just a heads up for any fellow SGP fans. They now have a crystal clear protector for the front AND back of the N4. i really wish they had an ultra eleophobic version, but i've used the crystal clear on my e4gt and have been extremely satisfied with the quality of the product. clarity is crystal clear just like the name states, and its very durable.
http://www.spigen.com/google-nexus/google-nexus-4-screen-protector-steinheil-dual.html

Just ordered. Thanks for the heads up!
Sent from my Nexus 10 using xda premium

Do these cover the entire screen?

Do these have the cutouts for the sensors and Why do these other ones have such bad reviews?
http://www.amazon.com/SPIGEN-SGP-Protector-Steinheil-Proximity/dp/B00A292TDK/ref=pd_sim_sbs_cps_1

1stGenRex said:
Do these cover the entire screen?
Click to expand...
Click to collapse
I think the front only covers the screen areas not the curved parts. The back since its flat might be fully covered

milesxd said:
Do these have the cutouts for the sensors and Why do these other ones have such bad reviews?
Click to expand...
Click to collapse
guess the complaints come from people who bought it early.
SGP has stated that they now include the proximity sensor cutout for all their N4 screen protectors.
Bought the dual protector and will see if its good. been holding off for too long to let the companies iron out the creases

these do have the proximity sensor cutout. it doesnt cover the front completely due to the curved glass, the following is a review of the oleophobic protector on a One X which also has curved glass. the reviewer points it out at about 1:50. I actually dont mind it, and it isnt even noticeable. only way you're going to get one that covers the entire screen is if its a wet application protector. but the quality/feel of wet apply protectors is just not for me.
http://www.youtube.com/watch?v=jcV0AJzNC4U

No SGP protector completely covers the front screen. They are cut too short all around and do NOT extend to cover the area just before the curved glass and the curved portion itself.
There was also massive issue with the proximity sensors malfunctioning due to SGP. They have allegedly "revised" it but no telling if you get stuck with some old stock.
Personally, I've owned and dealt with SGP. Too many negatives with their product and too many other better choices to be bothered buying from them anymore. I can't recommend them but good luck to those that do buy.
Note: If you want a screen protector that covers the ENTIRE SCREEN including the curved edges with cutouts for Proximity censors and camera, I highly recommend Skinomi. :thumbup:
Sent from my Nexus 4

FallN said:
No SGP protector completely covers the front screen. They are cut too short all around and do NOT extend to cover the area just before the curved glass and the curved portion itself.
There was also massive issue with the proximity sensors malfunctioning due to SGP. They have allegedly "revised" it but no telling if you get stuck with some old stock.
Personally, I've owned and dealt with SGP. Too many negatives with their product and too many other better choices to be bothered buying from them anymore. I can't recommend them but good luck to those that do buy.
Note: If you want a screen protector that covers the ENTIRE SCREEN including the curved edges with cutouts for Proximity censors and camera, I highly recommend Skinomi. :thumbup:
Sent from my Nexus 4
Click to expand...
Click to collapse
Do you have the Skinomi protector installed? If so, how does the screen feel and does it work with a case?
Sent from my Nexus 4 using xda premium

I got the SGP before they fixed it, no cut out so the phone was a pain to use, also if you do not get the screen protector exactly in the center of the screen one side tends to lift due to the stiffness of the film. I sent mine back and ordered a Skinomi, should have that tomorrow.

Funny as my Spigen does not have the proximity cutout, only the camera and everything functions as it should.

FatalityBoyZahy said:
Do you have the Skinomi protector installed? If so, how does the screen feel and does it work with a case?
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Yes, I've had my Skinomi on for over a week (front & back).
The screen protector adds a tiny bit of grip which is great for keeping it from sliding off surfaces. It's not sticky like I've found some other screen protectors like Zagg but it's not as butter smooth as the naked screen, as to be expected!
My fingers glide smoothly over the screen with no noticeable drag. So far it feels great. Again, not as good as the naked glass but almost.
Sent from my Nexus 4

FallN said:
No SGP protector completely covers the front screen. They are cut too short all around and do NOT extend to cover the area just before the curved glass and the curved portion itself.
There was also massive issue with the proximity sensors malfunctioning due to SGP. They have allegedly "revised" it but no telling if you get stuck with some old stock.
Personally, I've owned and dealt with SGP. Too many negatives with their product and too many other better choices to be bothered buying from them anymore. I can't recommend them but good luck to those that do buy.
Note: If you want a screen protector that covers the ENTIRE SCREEN including the curved edges with cutouts for Proximity censors and camera, I highly recommend Skinomi. :thumbup:
Sent from my Nexus 4
Click to expand...
Click to collapse
I ordered the oleophobic screen protector for my N4 (which I'm still waiting for from Google) and found out I did not receive the revised one. A quick email to them ended up in me receiving a second set for free days later without needing to return the ones I already have :laugh:
I find Skinomi and most wet application screen protectors to easily form imprints and wrinkles that don't "heal" perfectly after a while, although still not bad. Just received an XOSkins full body kit from their Cyber Monday sale which I'll compare to the Skinomi one on my iPod Touch. I'm also getting the bumper, so the lack of full coverage on the SGP really doesn't affect me.

I just got my oleophobic and although it seems to be recommended by everyone, it got scratched from day one. Never had the same problem with Zagg or others. Conclusion: I wouldnt recommend SPIGEN! Sounds fancy - "olephobic"- but doesn't actually protect or fit as well as others.

mouyias said:
I just got my oleophobic and although it seems to be recommended by everyone, it got scratched from day one. Never had the same problem with Zagg or others. Conclusion: I wouldnt recommend SPIGEN! Sounds fancy - "olephobic"- but doesn't actually protect or fit as well as others.
Click to expand...
Click to collapse
Oleophobic coatings are always softer than glass. By ordering that one, you essentially chose fingerprint resistance over scratch resistance. Glass with oleophobic coatings is also more prone to scratches because the coating itself scratches or wears down with use. Ask anyone with an iPhone 4.
If you want scratch resistance, get a harder screen protector (like the Ultra Crystal).

i would be looking forward to have this skin compared to the XOskin protector. I've used XO skins before and they are great! but i wonder how this does when they are side by side

Sparta507 said:
i would be looking forward to have this skin compared to the XOskin protector. I've used XO skins before and they are great! but i wonder how this does when they are side by side
Click to expand...
Click to collapse
Can any of you provide pics with the UC dual ones once you get them? I would greatly appreciate it! Thanks!

I would also like to see the ultra clear on a N4
Sent from my SGH-T989 using Tapatalk 2, patiently waiting for my Nexus 4

How easily do these get scratched?
Sent from my Nexus 4

F0rgiven said:
I would also like to see the ultra clear on a N4
Sent from my SGH-T989 using Tapatalk 2, patiently waiting for my Nexus 4
Click to expand...
Click to collapse
I didn't buy the dual protector, but here's what it looks like for the front.
( Left )
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Is anyone going to get SGP's Screen Protector GLAS.tR SLIM?

http://www.spigen.com/galaxy-s4-screen-protector-glas-tr-slim-premium-tempered-glass.html
Hope someone can test it. I'd like to get it but it caused all sorts of problems on Xperia Z. As S4 has a ton of sensors I wonder how it's going to cope.

I'm running a SGP Ultra Fit and the Ultra Crystal at the moment, although I'm going to get a glas.Tr in the next couple of months when reviews are out; out of my experience with the glass protector on my Galaxy SII, it worked as advertised with the main problem being the unresponsiveness to cold fingers (e.g. Winter in Europe), which made me go for the Ultra Crystal. But since the new glas.Tr is slimmer and the screen of the S4 much more sensitive (gloves, Air View), I'm willing to give it a second try.

I have one installed on my S4, have to say that these are hands down the best feeling screen protector Ive used. I was a long time fan of the Invisible Shield HD for several devices before this one. My installation was not perfect, however. I have two tiny specs of dust presumably under the protector but not worth taking off and sending back for the replacement.

I don't yet have my S4, but nevertheless I have ordered both the glas.tr screen protector and the ultra slim shell.
There was a somewhat decent YouTube video that showed the glas.tr on an iPhone 5. What was important for me is that this protector has the adhesive across the entire screen and not like the S3 versions where it was limited to only the edges.
"So what you want me to do 'bout that?"

I have had mine on for 2 days now and I love it! Its case friendly and fits awesome. Also I had to take it off because of dust like 5 times and some packing tape took it right off the protector and went right back on! Now the tr slim is 38 I think vs the 25 for just the slim and the slim is I think about half as slim as the tr slim. So I'm not sure what I would have liked better. The rounded edges feel great. I can handle my phone and everything feels so smooth but if the slim is super thin, maybe I would have liked that more. Either way its just like having a screen on a screen. No touch issues or brightness problems at all. I'm almost sad that its meant to be thrown away once it took its fall for you! 5 stars. But I will be ordering a metal home button. Even the curved cutout for the home button still makes it too deep to press comfortably.
Sent from my SAMSUNG-SGH-I337 using XDA Premium HD app

my application for the glas.tR is 99% perfect except for the bottom right corner just at the edge of it where there is one tiny speck of dust trapped.....but no point taking it off and ruining the adhesive..
mini glas.tR review: freaking smooth to touch, oleophobic coating does its job and ensures it aint a fingerprint magnet. easily wiped off when there are fingerprints.
nothing beats the feeling of glass....and the clarity is top notch...pretty damn worth it in my opinion.
Application tip: if you are applying yourself make sure you are in a dust free environment, for me i did it in my shower after a warm bath (the steam traps dust in the air and makes the evironment relatively dust free)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

thanks for the photo semajm. I'm looking forward to getting the glas for my coming s4, especially now that they do a full screen adhesive.
Is the Tr (curved edges) worth the extra cost, compared to the "t"?

I see the one you have pictured is orange, and the one on the website which is blue, I'm just wondering exactly what the difference is, if you know?

glas.tR, the "T" stand for tempered and the "R" stands for rounded
the blue one is 0.28mm making it thinner.
the orange one is 0.4mm with the rounded edges. some users say it might fit cases better than the blue one. additionally, spigen says the rounded edges make it anti-chip

I'm really torn between the GLAS.tR SLIM and the Bodyguardz Pure. I know for a fact that the latter does not have rounded edges but I've heard some stating the oleophobic coating on the Pure is slightly better than the GLAS.tR, anyone have any opinions or have had both?

semajm85 said:
my application for the glas.tR is 99% perfect except for the bottom right corner just at the edge of it where there is one tiny speck of dust trapped.....but no point taking it off and ruining the adhesive..
mini glas.tR review: freaking smooth to touch, oleophobic coating does its job and ensures it aint a fingerprint magnet. easily wiped off when there are fingerprints.
nothing beats the feeling of glass....and the clarity is top notch...pretty damn worth it in my opinion.
Application tip: if you are applying yourself make sure you are in a dust free environment, for me i did it in my shower after a warm bath (the steam traps dust in the air and makes the evironment relatively dust free)
\
Click to expand...
Click to collapse
Have you tried to use gloves on and check if it work?

007shaolin said:
Have you tried to use gloves on and check if it work?
Click to expand...
Click to collapse
just did at your request. not very thick gloves. it works.

Mrglass86 said:
I have had mine on for 2 days now and I love it! Its case friendly and fits awesome. Also I had to take it off because of dust like 5 times and some packing tape took it right off the protector and went right back on! Now the tr slim is 38 I think vs the 25 for just the slim and the slim is I think about half as slim as the tr slim. So I'm not sure what I would have liked better. The rounded edges feel great. I can handle my phone and everything feels so smooth but if the slim is super thin, maybe I would have liked that more. Either way its just like having a screen on a screen. No touch issues or brightness problems at all. I'm almost sad that its meant to be thrown away once it took its fall for you! 5 stars. But I will be ordering a metal home button. Even the curved cutout for the home button still makes it too deep to press comfortably.
Sent from my SAMSUNG-SGH-I337 using XDA Premium HD app
Click to expand...
Click to collapse
Did you put the little jelly bean sticker over your home button? Makes the button raised up like it should be, works pretty well actually.

im waiting for the aluminum ones to be available....the jelly beans totally make it cartoonish

So.. do the sensors work? Airview for example.

yup, if u look the sensors are not even covered. the one covered is the front facing camera and it still works beautifully

is this glas stuff work with the neo hybrid case

spigen says yes, it works with the neo hybrid case. im waiting for mine to come in

Anyone have one that can confirm it fits with a tight fitting case?

thacounty said:
Anyone have one that can confirm it fits with a tight fitting case?
Click to expand...
Click to collapse
I have a glass .tr that I will be trying with the Rearth slim case. I dont anticipate it being an issue but will report nonetheless. I am thinking of getting the Neo hybrid soon though and am wondering if using those two together will cause the protector to push up.

Clarivue Screen Tempered Glass Screen Protector [Mini Review]EDIT:PARTIAL REFUND

EDIT: 8/1/13; Escalated via Paypal today and got resolution today for a partial refund of $20. I Clarivue offered a screen protector as a replacement and I declined. However, I requested a partial refund of $20.
EDIT: 7/29/13; I have been in email conversation with Clarivue and they are not on the up an up. Point being when I ordered, there were no pictures, no claims that the screen protector was made smaller to accommodate the curved glass of the N4. If there were such pictures, why did I ask if there were cut outs for the prox sensor and front cam? They will not even give me a new one to try out again without shelling out another $10 bux. They have lost me as a customer at this point and I suggest that people take heed in this my review and take it for what it's worth. Unfortunately, not worth 27 bux. It's a shame. Like I said, the glass is smooth, but the size just kills it for me. Clarivue claiming that all of this was disclosed when the glass was posted for sale on the site. I know what I did or did not see on that site.
Clarivue screen protector for the nexus 4. Not horrible but the protector is too short and not wide enough. It just covers the width of the screen. So I had to lift to readjust and because of that the side adhesive does not seat on the screen anymore as you can see in the pic. I am back using the iloome screen protector which I took off to try this and it stuck right like it was brand new.
Bottom line, if you have a TPU case or Seidio case of the same sort that has a large lip covering the screen, this may be the perfect protector for you. Using the phone with it was actually pretty responsive, I say a tiny bit better than the iloome, but that's just using for a few minutes.
I was so hoping this was THE protector to get. It's not for me. I mean it just barely fits and does not cover the entire screen like the iloome does. I can foresee dust and debris digging in there pretty easily, especially for me if I kept using it with the sides not seating anymore.
I will place an email to Clarivue. I have spoken to Alex before purchasing this and was told there would be a "restocking fee" but no refunds on these. I'll report back on what he/they say.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

kpjimmy said:
Clarivue screen protector for the nexus 4. Not horrible but the protector is too short and not wide enough. It just covers the width of the screen. So I had to lift to readjust and because of that the side adhesive does not seat on the screen anymore as you can see in the pic. I am back using the iloome screen protector which I took off to try this and it stuck right like it was brand new.
Bottom line, if you have a TPU case or Seidio case of the same sort that has a large lip covering the screen, this may be the perfect protector for you. Using the phone with it was actually pretty responsive, I say a tiny bit better than the iloome, but that's just using for a few minutes.
I was so hoping this was THE protector to get. It's not for me. I mean it just barely fits and does not cover the entire screen like the iloome does. I can foresee dust and debris digging in there pretty easily, especially for me if I kept using it with the sides not seating anymore.
I will place an email to Clarivue. I have spoken to Alex before purchasing this and was told there would be a "restocking fee" but no refunds on these. I'll report back on what he/they say.
Click to expand...
Click to collapse
I seem to be having the same issue with the protector, it just won't adhere to the sides of the screen. I have removed and reapplied it but nothing has improved. I will talk to them and see what happens since I have bought two of these.

I just want to be clear, The adhesive was fine when you first applied it but once you remove and reapply the adhesive becomes weak? or was it weak since the first application?

freezeburn said:
I just want to be clear, The adhesive was fine when you first applied it but once you remove and reapply the adhesive becomes weak? or was it weak since the first application?
Click to expand...
Click to collapse
I thought it was my fault but based on Android9000's post, he/she is having the same issue around the edges.

How about the fingerprints and the sensitivity of the screen?
Is it better than the iloome or even the MaruLabssilly
Thanks.

ping42 said:
How about the fingerprints and the sensitivity of the screen?
Is it better than the iloome or even the MaruLabssilly
Thanks.
Click to expand...
Click to collapse
It handle's fingerprints pretty good actually. The sensitivity is good as well. If I can use PIE UI, then it passes muster in my book :laugh:, but the size of it or lack of it IMO holds it back from being a recommend from me.

I'm more upset that you're cheating on your Nexus 4 with an HTC One...
LOL! JUST KIDDING!
Yeah, I mentioned that it looked WAY too short all around from the press shot which is why I wasn't even considering buying one but thank you for the review.
I think I'll try iloome + Ringke Slim. Do you think the iloome will fit well with the Ringke Slim? Thank you.
Sent from my Nexus 4

FallN said:
I'm more upset that you're cheating on your Nexus 4 with an HTC One...
LOL! JUST KIDDING!
Yeah, I mentioned that it looked WAY too short all around from the press shot which is why I wasn't even considering buying one but thank you for the review.
I think I'll try iloome + Ringke Slim. Do you think the iloome will fit well with the Ringke Slim? Thank you.
Sent from my Nexus 4
Click to expand...
Click to collapse
That HTC One is my wife's work phone . I have the diztronic ultra slim and try that on Monday when I get back in the office with the iloome.

Thanks for the review. Two important things for me is how the screen reacts to fingerprint marks and touch sensitivity. Well, although the size is not really optimal, this protector is one of my favorite choices now.
kpjimmy said:
Clarivue screen protector for the nexus 4. Not horrible but the protector is too short and not wide enough. It just covers the width of the screen. So I had to lift to readjust and because of that the side adhesive does not seat on the screen anymore as you can see in the pic. I am back using the iloome screen protector which I took off to try this and it stuck right like it was brand new.
Bottom line, if you have a TPU case or Seidio case of the same sort that has a large lip covering the screen, this may be the perfect protector for you. Using the phone with it was actually pretty responsive, I say a tiny bit better than the iloome, but that's just using for a few minutes.
I was so hoping this was THE protector to get. It's not for me. I mean it just barely fits and does not cover the entire screen like the iloome does. I can foresee dust and debris digging in there pretty easily, especially for me if I kept using it with the sides not seating anymore.
I will place an email to Clarivue. I have spoken to Alex before purchasing this and was told there would be a "restocking fee" but no refunds on these. I'll report back on what he/they say.
Click to expand...
Click to collapse

Chris_n00bz said:
Thanks for the review. Two important things for me is how the screen reacts to fingerprint marks and touch sensitivity. Well, although the size is not really optimal, this protector is one of my favorite choices now.
Click to expand...
Click to collapse
That's the only thing, I mean the only thing! Size counts here! lol Well that and the side adhesive giving out so easily. You don't have that issue?

OP Updated with the latest Clarivue news. Bottom line, they will not give me a replacement without shelling out 10 bux. And this screen protector being utterly useless, I just wasted $27.

Remember the sides not adhering properly? I though it was me. Apparently I don't think so anymore. Check out their pic on their own site with the adhesive not on the screen on the bottom right.

Yeah, this one looked worse that the Marulabs to me which is why I immediately ruled it out as an option. Just poorly designed and bad adhesive.
They really should refund your money. If I were you, I'd do a charge back with your CC or dispute with PayPal.
Sent from my Nexus 4

FallN said:
Yeah, this one looked worse that the Marulabs to me which is why I immediately ruled it out as an option. Just poorly designed and bad adhesive.
They really should refund your money. If I were you, I'd do a charge back with your CC or dispute with PayPal.
Sent from my Nexus 4
Click to expand...
Click to collapse
I just did lol. Now I have one pending on Maru and now on Clarivue.

DO NOT BUY the Clarivue!!
bottom line, buy either the iloome or sir lancelot's armor
Here's my mini review of the SLA glass protector
http://forum.xda-developers.com/showpost.php?p=44152632&postcount=23

Paypal dispute accepted my partial refund request
Opened up a dispute yesterday, escalated it today and got my partial refund of $20! :victory:

I see the slight bit of lift around the edge it doesn't bother me tho. With the screen on you can't see it. And it is convex at the edge, and with the screen off it makes it look a little wider than it really is. Also it does stick to the edge but its not quite as tight.
It doesn't have an adhesive backing it is a protective silicone layer. Its not sticky at all
Sent from my Nexus 7 using XDA Premium HD app. The glass goes from edge to edge on the displayed pucture
Overall your not gonna get any better with a flat piece of glass since it runs perfectly between the display under the glass of the screen

djdunn said:
I see the slight bit of lift around the edge it doesn't bother me tho. With the screen on you can't see it. And it is convex at the edge, and with the screen off it makes it look a little wider than it really is. Also it does stick to the edge but its not quite as tight.
It doesn't have an adhesive backing it is a protective silicone layer. Its not sticky at all
Sent from my Nexus 7 using XDA Premium HD app. The glass goes from edge to edge on the displayed pucture
Overall your not gonna get any better with a flat piece of glass since it runs perfectly between the display under the glass of the screen
Click to expand...
Click to collapse
I am glad you like it. I for one do not. Ok if it's not adhesive, it doesn't fit flush on the screen then. Even the picture from Clarivue shows that effect, which fails for me. If you like it, that's all that matters right?

Looks like Clariveu read your review and did some more editing in their product description that I don't remember seeing before.
Quote: We recommend installing the glass protector closer to the top of the phone to avoid bubbles near the bottom.

Plastic Screen Protector

After dealing with Halo on my Nexus 6 with glass protectors, I'm not even going to bother with glass for this phone. I have not ordered the phone yet because I was waiting for a good case and a good plastic screen protector. I found the case I wanted (Supcase Unicorn Beetle) and it will be released on the 25th. Does anyone have a really good plastic screen protector, or know where I can find one? All I can find on Amazon are ones with either bad reviews or no reviews at all. I have some time since I won't be ordering the phone until the case comes in. Thanks in advance!

Wondering this as well, especially since things aren't looking too good from reading the "tempered glass" screen protectors thread (at least until more of them are released). Anyone have any good or decent experiences with plastic screen protectors yet?

I found this one - http://amzn.to/1OaPLU1
I placed my order and will be installing it on mine and my wifes when I get the phone in.

I ordered these
http://smile.amazon.com/gp/product/B00ZS44QUS?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s00
Seem to be just as good as the ones I always bought from Verizon store. I also cant deal with the glass ones. They either dont fit to the edge of the screen or they pass the edge of the glass screen where the curve starts to drop off and then they chip also.

I ended up ordering XtremeGuard screen protector - http://www.ebay.com/itm/231637665779?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT
$1.99 for 6. I heard the XtremeGuard Spartan tempered glass were good (which they are not making for the MXPE). So if the tempered glass is good, I'm guessing the regular ones are just as good. These are the dry versions which I prefer and never had an issue with bubble or dust (I just lift up the edge/side closes to dust and use an extra long piece of tape to grab the particles). They also have a wet application for the front and rear.

iazybandit said:
I ended up ordering XtremeGuard screen protector - http://www.ebay.com/itm/231637665779?_trksid=p2060353.m2749.l2649&ssPageName=STRK:MEBIDX:IT
$1.99 for 6. I heard the XtremeGuard Spartan tempered glass were good (which they are not making for the MXPE). So if the tempered glass is good, I'm guessing the regular ones are just as good. These are the dry versions which I prefer and never had an issue with bubble or dust (I just lift up the edge/side closes to dust and use an extra long piece of tape to grab the particles). They also have a wet application for the front and rear.
Click to expand...
Click to collapse
I just got mine in yesterday...don't use the bumper with the screen protector. It'll just goof it all up. I'm just dealing with it until I can get a real case. The screen protector is OK...gets oily from your fingers and smudges like crazy but for that cheap, I'll deal with it until decent tempered glass comes out.

I wound up ordering this one:
http://www.amazon.com/gp/product/B00ZS2HKQ2?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
I have Illumishield for my 3DS and it works great. All of the negative reviews are for the glass, so I ordered the plastic and hopefully it will work well! I'll let everyone know when my phone arrives.

chris23445 said:
I wound up ordering this one:
http://www.amazon.com/gp/product/B00ZS2HKQ2?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
I have Illumishield for my 3DS and it works great. All of the negative reviews are for the glass, so I ordered the plastic and hopefully it will work well! I'll let everyone know when my phone arrives.
Click to expand...
Click to collapse
Just got mine today. They fit, but definitely seem like they are not for this phone. Corners are rounded way.differently of a radius and the sensors and camera spots up top seem very generic of a cut.
I already sent an email to the seller on Amazon billing hoping they revise the design.

carlz28 said:
Just got mine today. They fit, but definitely seem like they are not for this phone. Corners are rounded way.differently of a radius and the sensors and camera spots up top seem very generic of a cut.
I already sent an email to the seller on Amazon billing hoping they revise the design.
Click to expand...
Click to collapse
Besides the fit, did they apply easy and do they feel pretty good?

chris23445 said:
Besides the fit, did they apply easy and do they feel pretty good?
Click to expand...
Click to collapse
Yes. Feel is very smooth. Easy to apply. Minimal bubbles that are easy to push out. I've used iLlumishield many times before. Probably top 3 in quality. I'm sure the first run was probably used from a template that was sent to them. If they get an actual phone in hand, the fit will be spot on.

People still use screen protectors.. You do know the only way u can scratch up ur screen or crack it is dropping it on a bunch of small rocks or face first on concrete without a raised bumper case.., only fine grits of rocks and sand scratches gorilla glass.. Yea is no saphire glass but still..

StreetkillnHD said:
People still use screen protectors.. You do know the only way u can scratch up ur screen or crack it is dropping it on a bunch of small rocks or face first on concrete without a raised bumper case.., only fine grits of rocks and sand scratches gorilla glass.. Yea is no saphire glass but still..
Click to expand...
Click to collapse
They are so cheap and this way I can ensure I won't get any small surface scratches. It also keeps the screen pristine for when I resell my phone.

StreetkillnHD said:
People still use screen protectors.. You do know the only way u can scratch up ur screen or crack it is dropping it on a bunch of small rocks or face first on concrete without a raised bumper case.., only fine grits of rocks and sand scratches gorilla glass.. Yea is no saphire glass but still..
Click to expand...
Click to collapse
all it takes is a bit of sand in your pocket and you will get scratches....gorilla glass isnt all that great, better than standard but i learned my lesson from no screen protector on my samsung phones

StreetkillnHD said:
People still use screen protectors.. You do know the only way u can scratch up ur screen or crack it is dropping it on a bunch of small rocks or face first on concrete without a raised bumper case.., only fine grits of rocks and sand scratches gorilla glass.. Yea is no saphire glass but still..
Click to expand...
Click to collapse
All it takes is just that one little bit.
chris23445 said:
They are so cheap and this way I can ensure I won't get any small surface scratches. It also keeps the screen pristine for when I resell my phone.
Click to expand...
Click to collapse
Exactly. It barely costs nothing. I have a plastic screen protector and I smacked my phone against the edge of my aluminum Apple keyboard. It damaged the screen protector but my screen is scratch free.
I know that when I sell my LG G3, I can say that the screen is scratch free and in pristine condition because it was protected.

Has there been any consensus on what the best screen protector is yet? Wet or Dry?

zeroibis said:
Has there been any consensus on what the best screen protector is yet? Wet or Dry?
Click to expand...
Click to collapse
I never used wet. Even though a phone may be waterproof in terms of drops, I don't ever want to squeegee water out from a screen protector only for it to get trapped in the crevice of the screen.
I personally prefer the dry only because it uses static to cling on and stays on. If there is dust or particles underneath, all I have to do is lift up the side closest and take an extra long piece of tape and use it to grab the particles. Repeat this until it is particle free and you have a flawless screen protector.
In the past, the screen protector was sticky and if something got stuck underneath, that was it. It would be hard to remove the particle.

chris23445 said:
Besides the fit, did they apply easy and do they feel pretty good?
Click to expand...
Click to collapse
Just a follow up, they will be shipping a new version for free soon. Excellent customer service from iLlumishield. Maybe check in with them and see if you can get the same
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

carlz28 said:
Just a follow up, they will be shipping a new version for free soon. Excellent customer service from iLlumishield. Maybe check in with them and see if you can get the same
View attachment 3476045
Click to expand...
Click to collapse
Awesome! I will probably contact them once I receive mine then, since mine will be the older version. Thanks!!

All XtremeGuard is 90% off. coupon:MEGA90
https://www.reddit.com/r/MotoX/comments/3lcg5p/90_off_xtremeguardcom/
Here is the MXPE Screen protector http://www.xtremeguard.com/Motorola...to_x_pureed_screen_protector.htm#.Vftgcn1s_Ag
Wet/Dry/Front/Back

ErikHellstrom said:
All XtremeGuard is 90% off. coupon:MEGA90
https://www.reddit.com/r/MotoX/comments/3lcg5p/90_off_xtremeguardcom/
Here is the MXPE Screen protector http://www.xtremeguard.com/Motorola...to_x_pureed_screen_protector.htm#.Vftgcn1s_Ag
Wet/Dry/Front/Back
Click to expand...
Click to collapse
Awesome! Thanks for this - just placed an order for the Hi Def Dry screen protector (which I assume is traditional PET). Can't beat 60 cents!

Glass Screen Protectors

With the FLat Screen on the GOOGLE PXEL and Pixel 4 XL - getting quality screen protectors is going to be much easier than it has been in the past with curved glass screens.
I ordered my screen protector form Amazon - The AMFILM Glass Screen Protector
and I am very happy with the results. Comes with the usual accessories and a 'frame' for installing the screen protector. The box includes 3 glass screen protectors in case something happens with the first one. The price
is very reasonable, just $8.99. Installation was a piece of cake - no bubbles - installed quickly - no halo around the edges and case friendly.
I have used AMFilm Screen protectors on other phones and have always been very happy with their customer service and the quality of their screen protectors. I installed mine and then put my Spigen Crystal Clear case
on and I feel it is nicely protected. Looks great too!

Geekser said:
With the FLat Screen on the GOOGLE PXEL and Pixel 4 XL - getting quality screen protectors is going to be much easier than it has been in the past with curved glass screens.
I ordered my screen protector form Amazon - The AMFILM Glass Screen Protector
and I am very happy with the results. Comes with the usual accessories and a 'frame' for installing the screen protector. The box includes 3 glass screen protectors in case something happens with the first one. The price
is very reasonable, just $8.99. Installation was a piece of cake - no bubbles - installed quickly - no halo around the edges and case friendly.
I have used AMFilm Screen protectors on other phones and have always been very happy with their customer service and the quality of their screen protectors. I installed mine and then put my Spigen Crystal Clear case
on and I feel it is nicely protected. Looks great too!
Click to expand...
Click to collapse
Dose it cover just to the edge of the viewable display or go over a little? I'm happy to see they have a alignment tray this time.

knife2240 said:
Dose it cover just to the edge of the viewable display or go over a little? I'm happy to see they have a alignment tray this time.
Click to expand...
Click to collapse
I will see if I can get a photo of it later when I get home from work so you can make your own judgement. for me, it fits just right.

Geekser said:
I will see if I can get a photo of it later when I get home from work so you can make your own judgement. for me, it fits just right.
Click to expand...
Click to collapse
Did you use the Installation Tray to install yours? If so did that line it up perfectly?

Look for the ESR tempered glass. Black borders but it's full adhesive and fits perfect. has an installation frame so no alignment issues. 2 pack for 15 I think.

jblack41510 said:
Did you use the Installation Tray to install yours? If so did that line it up perfectly?
Click to expand...
Click to collapse
Yup - lines up perfectly when installing with the installation tray.

I went with this one:
https://www.amazon.com/dp/B07WHN62XS/ref=cm_sw_r_other_apa_i_fdUSDbJE435Z5
It's a 3 pack as well, a little less cost and has the grooved cutouts instead of the straight flat line at the top. Will see how well it applies and handles.
Sent from my Pixel 2 XL using Tapatalk

I currently have these on and the fit isn't the best. I get a slight halo on the top cutout and a little on the lower left side. I'm pretty sure if a installation tray was included it would solve the problem. I also gave these a try but the black border covered some of the viewable screen and the case was pathetic so I sent them back. I will be getting the AMFILM like the OP today. Those were great with the 3XL.

bamfsig45 said:
Look for the ESR tempered glass. Black borders but it's full adhesive and fits perfect. has an installation frame so no alignment issues. 2 pack for 15 I think.
Click to expand...
Click to collapse
I like the ESR TGSP too for the 4XL. I was able to install it bubble-free with the included tray and I like the fact it's full adhesive. This is probably the best one out there right now until Whitestone Dome makes one for the the Pixel 4 & 4XL.

Flyer66 said:
I like the ESR TGSP too for the 4XL. I was able to install it bubble-free with the included tray and I like the fact it's full adhesive. This is probably the best one out there right now until Whitestone Dome makes one for the the Pixel 4 & 4XL.
Click to expand...
Click to collapse
The only issue I have with the ESR is the borders cut into your display so you loose a tiny bit on the edge.

EeZeEpEe said:
I went with this one:
https://www.amazon.com/dp/B07WHN62XS/ref=cm_sw_r_other_apa_i_fdUSDbJE435Z5
It's a 3 pack as well, a little less cost and has the grooved cutouts instead of the straight flat line at the top. Will see how well it applies and handles.
Sent from my Pixel 2 XL using Tapatalk
Click to expand...
Click to collapse
How it looks installed. No bubbles or hallos so far after 2 days and 3 nights.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Pixel 4 XL using Tapatalk

+1 for the amFilm glass screen protector.
I received mine yesterday.
The installation was drop-dead simple. The included positioning frame makes it really easy.
No bubbles.
No halos.
Case friendly.
Finger print resistant.

pdfruth said:
+1 for the amFilm glass screen protector.
I received mine yesterday.
The installation was drop-dead simple. The included positioning frame makes it really easy.
No bubbles.
No halos.
Case friendly.
Finger print resistant.
Click to expand...
Click to collapse
Does your screen protector seem too narrow and not wide enough? I am tempted to get the same one but the reviews on Amazon seem to consistently complain how the screen protector isn't wide enough to cover the entire screen

every TGSP on Amazon seems to have issues with being too narrow...
I also like the reviews which were all written months before the phone was released too! All were 5 stars...

bestgio said:
Does your screen protector seem too narrow and not wide enough? I am tempted to get the same one but the reviews on Amazon seem to consistently complain how the screen protector isn't wide enough to cover the entire screen
Click to expand...
Click to collapse
The Pixel 4 XL's screen is curved/rounded near the very edges. This means that any tempered glass screen protector is going to have to be a couple millimeters smaller than the screen, so that it doesn't develop a halo (due to dust & debris finding it's way under the screen protector near the edges where there's little/no adhesion).
In my opinion, the amFilm tempered glass screen protector is VERY precisely sized so that it doesn't develop a halo, yet covers ALL of the viewable/back-lit screen area.
I am very happy with the fit

I've tried a few screen protectors so far and finally found one that has zero halo and covers the visible part of the actual screen. I also comes with an install frame for aligning it properly.
https://www.amazon.com/gp/product/B07YCBZCP3/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1

airmaxx23 said:
I've tried a few screen protectors so far and finally found one that has zero halo and covers the visible part of the actual screen. I also comes with an install frame for aligning it properly.
https://www.amazon.com/gp/product/B07YCBZCP3/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Another product with many 5 star ratings BEFORE the phone reached consumers! If it works for you, great! I have no problem with that, just irritated by the bogus reviews many products are getting on Amazon...

What do you guys think of the following:
https://www.pure-gear.com/screen-pr...nnouncement&utm_term=Engaged+in+Last+6+Months

SlyUK said:
What do you guys think of the following:
https://www.pure-gear.com/screen-pr...nnouncement&utm_term=Engaged+in+Last+6+Months
Click to expand...
Click to collapse
Way too overpriced IMHO. I went with AMfIlm like the OP and am very happy. I had a blemish on my 1st install and they quickly sent me a new 3 pack for free. It fits well with my Speck case, has zero halo and is only $8.99.

bestgio said:
Does your screen protector seem too narrow and not wide enough? I am tempted to get the same one but the reviews on Amazon seem to consistently complain how the screen protector isn't wide enough to cover the entire screen
Click to expand...
Click to collapse
I have the amFilm as well, and it definitely feels too narrow. Not visually, but it's not pleasant to use with the back gesture. Your thumb ends up rubbing on the sharp edge. Other than that, it seems very high quality and fits very well.
I also tried the Pleson screen protector, and I highly recommend avoiding that. It doesn't adhere properly at all. I tried installing two of them with no luck, and threw away the third. Complete junk.
I've ordered the IntelliARMOR screen protector to see how that works.
Edit: Now that you mentioned it and I took a closer look, the amFilm is definitely too narrow, and there are portions of the screen sticking out on both sides. I'm just going to take it off, I can't unsee it now.