Database Info

[Q] [ODIN][UCLB3] AT&T 2.3.6 Gingerbread with root added - Infuse 4G - Arabic Support

[Q] [ODIN][UCLB3] AT&T 2.3.6 Gingerbread with root added - Infuse 4G - Arabic Support
[ODIN][UCLB3] AT&T 2.3.6 Gingerbread with root added - Infuse 4G
I applied the above ROM to my AT&T. So far, all is working well from what I have tested: WIFI, BlueTooth, Phone and GPS. It seems to be very stabel compare to other ROMs I applied in the past.
My delimma is that I correspond in 4 different languages and arabic is one of them. When I applied the Hebrew Arabic Patch I am able to see the arabic letters connected. However when I attempt to write any arabic text, it is all disconnected.
I could not post to the forum where I found the ROM since I am new to the XDA forum. But I believe the answer to this question may help others.
Can anyone please provide me a patch to this ROM so it can allow me to write connected arabic letters? If such a pacth exists, can you please point me to it?
Thx for any help!!!

Some of the Arabic keyboards available on the Android market have settings to connect the letters. Here is a link to one that defaults to having letters disconnected, but it offers a setting to connect them.:
https://play.google.com/store/apps/...51bGwsMSwxLDMsImNvbS5pYnJhaGltLmtleWJvYXJkIl0

This worked!
Thanks jscott30!

Hi Ishedra/ jscott30,
I currently have a Samsung Infuse 4G with the GB 2.3.6 update. I am really only interested in rooting and getting Arabic RTL support.
You mentioned using the ROM [ODIN][UCLB3] AT&T 2.3.6 Gingerbread with root.
My questions are:
Which of the options did you go with because there are 4 of them? Or does it not matter which one?
Where do you obtain a Hebrew Arabic patch that works with this ROM. It seems Arabic support is only available in certain custom ROMs. I tried searching for a general patch that works on all rooted 2.3.6 Gingerbread but couldn't find any.
Thanks in advance!

dashrendar said:
Hi Ishedra/ jscott30,
I currently have a Samsung Infuse 4G with the GB 2.3.6 update. I am really only interested in rooting and getting Arabic RTL support.
You mentioned using the ROM [ODIN][UCLB3] AT&T 2.3.6 Gingerbread with root.
My questions are:
Which of the options did you go with because there are 4 of them? Or does it not matter which one?
Where do you obtain a Hebrew Arabic patch that works with this ROM. It seems Arabic support is only available in certain custom ROMs. I tried searching for a general patch that works on all rooted 2.3.6 Gingerbread but couldn't find any.
Thanks in advance!
Click to expand...
Click to collapse
Hi dashrendar,
Here is a link to the patch that Ishedra most likely used. It should work with any rooted UCLB3 base or rom w/ CWM recovery. If you opt for one of the options from my Odin to rooted UCLB3 thread, it sounds like you would most be interested in Option D.
Arabic patch: http://forum.xda-developers.com/showthread.php?t=1467808
Arabic keyboard: https://play.google.com/store/apps/...51bGwsMSwxLDMsImNvbS5pYnJhaGltLmtleWJvYXJkIl0
Let us know if this works, as I've not tried it myself since English is my only language.

Outstanding jscott...u d man
Sent from my SGH I717, Black Star.

Thanks a lot jscott30.
The Infuse is actually my wife's. I have an AT&T Samsung Galaxy SII with stock ROM (2.3.6 GB).
I wanted to make sure that I can do the same patch on my wife's phone so that she is not left out.
I will definitely be following the steps you provided, but I wanted to test on my phone first. Do you recommend a similar ROM for the SGSII similar to what you did for the Infuse--basically, rooted stock software with CWM (to support the RTL patch). The goal is to be as close to stock as possible (can't afford to lose any functionality but I do welcome the ability to uninstall bloatware).
Thanks again!

dashrendar said:
Thanks a lot jscott30.
The Infuse is actually my wife's. I have an AT&T Samsung Galaxy SII with stock ROM (2.3.6 GB).
I wanted to make sure that I can do the same patch on my wife's phone so that she is not left out.
I will definitely be following the steps you provided, but I wanted to test on my phone first. Do you recommend a similar ROM for the SGSII similar to what you did for the Infuse--basically, rooted stock software with CWM (to support the RTL patch). The goal is to be as close to stock as possible (can't afford to lose any functionality but I do welcome the ability to uninstall bloatware).
Thanks again!
Click to expand...
Click to collapse
Glad to help! And I haven't been around the SGSII forums to be able to suggest something similar, but I'm positive that they have similar rooted stock roms. At very least, over there they can show you how to root your phone and install CWM recovery.
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2

Hi jscott30,
Thanks again.
I am in a bit of a dilemma. I stayed up until 4:30 AM this morning trying to resolve an issue I ran into. Sorry, I tried to post in the original thread for the stock image, but because I don't have enough posts I wasn't allowed to.
Anyway, I went with option D as you suggested. I performed the data/cache wipe in step 4 to avoid the potential boot issue. Everything else went okay.
However, after installing a bunch of applications and freezing a couple, the Phone application kept crashing. Basically, when I click on it, the screen stalls for a couple of seconds, the screen turns black with a quick all-screen white flash, then black again. Then after a couple of seconds, I see the pattern screen lock. Then I can go in again. That happened every time I clicked the Phone icon.
I performed the flash again the same way. It went fine. The first thing I checked was the Phone app, and it was working okay. However, now every time I turn on Wi-Fi or mobile network connectivity, the same crash keeps happening periodically every 10-20 seconds, which makes the phone unusable. :crying: I initially thought it was the external SD card, but I took it out and the same symptom persisted. I turned both network connections off for now and no crashes are happening.
Do you have any ideas? I thought I would post this first before I start scouring the forums in case you had any ideas.
Thanks!

I can't reproduce those issues here, so it's hard to say. Try a software factory reset by going to Settings / Privacy / Factory data reset. That may clear what is causing your issue. That package has been downloaded over 2000 times, though, and this is the first I've heard of this issue. Makes me think that something is left from a prior install. Also, do you have this issue before the Arabic patch?
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2

Hi jscott30,
I have done the reset as you described and it goes into a loop when it boots. I tried flashing again and this time I wanted to keep track of the order of things. I mean last night I was able to download and install a bunch of apps using WiFi without problems. I think after which I installed the Arabic patch and the crash started happening.
I flashed again about 30 minutes ago following your steps to the word. After that I did the the following:
- Skipped the Setup Wizard;
- Enabled WiFi;
- Launched the browser to ensure data is being transmitted;
- I added my wife's Google Account to make sure it's not a synch issue;
- I asked her to check her GMail on both WiFi and mobile connectivity;
It seems like it's working normally so far. I will try to apply the Arabic patch to see if it's the culprit (which would be disappointing to see it affecting Wifi/Mobile Data).
By the way, I noticed that Al Hosny instructed installing something called Aries. What is that? And do I need this as well prior to the patch?
If the patch is indeed the problem? Could it be an incompatibility with this version of the CWM kernel? (Sorry for any noob questions).
Anyway, thanks for the quick response and I'll keep you updated as to what happens.

If the patch suggested ends up being culprit, I'd PM Ishedra to ask how to apply an Arabic patch. It was a guess on my part that he used the one patch, as I've not used it before. Unfortunately, English is my only fluent language.
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2

dashrendar said:
Hi jscott30,
Thanks again.
I am in a bit of a dilemma. I stayed up until 4:30 AM this morning trying to resolve an issue I ran into. Sorry, I tried to post in the original thread for the stock image, but because I don't have enough posts I wasn't allowed to.
Anyway, I went with option D as you suggested. I performed the data/cache wipe in step 4 to avoid the potential boot issue. Everything else went okay.
However, after installing a bunch of applications and freezing a couple, the Phone application kept crashing. Basically, when I click on it, the screen stalls for a couple of seconds, the screen turns black with a quick all-screen white flash, then black again. Then after a couple of seconds, I see the pattern screen lock. Then I can go in again. That happened every time I clicked the Phone icon.
I performed the flash again the same way. It went fine. The first thing I checked was the Phone app, and it was working okay. However, now every time I turn on Wi-Fi or mobile network connectivity, the same crash keeps happening periodically every 10-20 seconds, which makes the phone unusable. :crying: I initially thought it was the external SD card, but I took it out and the same symptom persisted. I turned both network connections off for now and no crashes are happening.
Do you have any ideas? I thought I would post this first before I start scouring the forums in case you had any ideas.
Thanks!
Click to expand...
Click to collapse
When you were installing the app and the OS started crashing, were you trying to install apps that you had backed up previously?
Some times, certain apps restore or apps/data restore from the older OS will cause crash on the newer OS.
When this happens, I would suggest downloading the app new from your source and do not restore them from backed up source.
Not every app/data does this...but if you ran into problems, start new.

Hi qkster,
I was actually downloading and installing those apps from the market. I only backed up/restored their relevant data/settings.
I have some good news though. Before I loaded this Arabic Patch I started looking for another one. I tried and settled on this method whose source steps are in this blog. I see the Arabic text fine, the letters were all connected in GMail, Whatsapp and Facebook. I haven't tried the keyboard because my wife showed no interest.
I apologize for not trying out the previous Arabic patch in order to confirm its functionality. Unfortunately, I didn't have enough time--with my wife waiting and depending on her phone and my baby daughter wanting to play with me, it's hard to find the time.
I installed the rest of the apps for my wife and everything is working solid so far.
This is good practice for when I need to do the same steps on my brother's and dad's phones. I believe my phone will be getting ICS soon (which should have built-in Arabic language support), so we'll see.
Thanks again for the great ROM and advice guys. :good:

[Q] No WiFi

I have a Samsung Rugby Smart ( AT&T ).
I used the last two files on this page:
http://forum.xda-developers.com/showpost.php?p=30347369&postcount=5
Stock recovery and system: odin_gingerbread.ucla4_recovery_stock_system_stock _no_root.tar.md5
ClockworkRecovery 6.0.1.1 and No-Bloatware and Root: odin_gingerbread.ucla4_recovery_cwr_6011_system_no _bloat.tar.md5.gz
and my WiFi is not working. When I go to Wireless and Networks - Wi Fi Settings -
Says: Error next to the check mark to turn wifi on or off. :crying:
Everything else seems to work including sound.
Baseband: I847UCLH4
Gingerbread 2.3.6
Build Number: GINGERBREAD.UCLH4
Kernel version: 2.6.35.7
WiFi MAC address: Unavailable
Bluetooth address: works!!
Does anyone have any idea what could be the problem?
thanks you

Is this issue solved?
Is this issue solved?
VoiceArtistUSA said:
I have a Samsung Rugby Smart ( AT&T ).
I used the last two files on this page:
http://forum.xda-developers.com/showpost.php?p=30347369&postcount=5
Stock recovery and system: odin_gingerbread.ucla4_recovery_stock_system_stock _no_root.tar.md5
ClockworkRecovery 6.0.1.1 and No-Bloatware and Root: odin_gingerbread.ucla4_recovery_cwr_6011_system_no _bloat.tar.md5.gz
and my WiFi is not working. When I go to Wireless and Networks - Wi Fi Settings -
Says: Error next to the check mark to turn wifi on or off. :crying:
Everything else seems to work including sound.
Baseband: I847UCLH4
Gingerbread 2.3.6
Build Number: GINGERBREAD.UCLH4
Kernel version: 2.6.35.7
WiFi MAC address: Unavailable
Bluetooth address: works!!
Does anyone have any idea what could be the problem?
thanks you
Click to expand...
Click to collapse

You could flash back to stock firmware and try again. If the error persists then the files are probably not right for your phone.

broadways said:
You could flash back to stock firmware and try again. If the error persists then the files are probably not right for your phone.
Click to expand...
Click to collapse
The files the OP pulled are for his phone based on the baseband shown. It looks like it may be related to the OTA update that came through recently.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
---------- Post added at 08:40 AM ---------- Previous post was at 08:37 AM ----------
VoiceArtistUSA said:
I have a Samsung Rugby Smart ( AT&T ).
I used the last two files [edit] [and] my WiFi is not working
Baseband: I847UCLH4
Does anyone have any idea what could be the problem?
Click to expand...
Click to collapse
Did you install the OTA update that AT&T pushed recently before flashing the ODIN images?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

kemonine96 said:
Did you successfully apply the ota update that came through for the rugby?
Click to expand...
Click to collapse
VoiceArtistUSA said:
Yes, before any root or flash of course.
Click to expand...
Click to collapse
That explains it, the OTA update includes a slightly changed kernel (based on what I saw in the diffs) that is likely causing your WiFi issue. Can you try applying motorhead's kernel from here and see if WiFi starts working? I know it is not a full fix, but it should get your wifi back to working while motorhead and I coordinate on getting a stock kernel that can be flashed from CWR put together.

YEEEEE HAAAAWWWWW
I got some WIFI !!!!
Camera, BT and sound, seems like everything works.
Can't imagine why not a "Full fix".
Thank You !!!!
Says there is an OTA update, after it downloads, I get tossed into CWM bootloader 6.1.1 and the update doesn't get applied.
All I do is choose 'reboot system'.
Also I'm getting ...
"[ AT&T Address Book] Checking Subscriber Information"
when I touch contacts.
I am not an AT&T customer, I use STLK the BYOP program.
We really need a custom ROM for this great device, no bloat, no AT&T updates, no AT&T bloatwares, No CIQ, No City ID.
I would be HAPPY to PAY for a custom ROM and have it delivered two weeks from last Thursday. Jellybean?
Someone like me who chooses a rugged phone may not be into all the bells and whistles, so a basic stripped down
ROM would be great.
and yes, I am getting lag coming out of deep sleep. may have to hit power button twice to unlock.
Can't wait to try Motorheads soon to be released power kernel...
kemonine96 said:
That explains it, the OTA update includes a slightly changed kernel (based on what I saw in the diffs) that is likely causing your WiFi issue. Can you try applying motorhead's kernel from here and see if WiFi starts working? I know it is not a full fix, but it should get your wifi back to working while motorhead and I coordinate on getting a stock kernel that can be flashed from CWR put together.
Click to expand...
Click to collapse

VoiceArtistUSA said:
I got some WIFI !!!!
Camera, BT and sound, seems like everything works.
Click to expand...
Click to collapse
I'm glad to hear it's working again for you.
VoiceArtistUSA said:
Can't imagine why not a "Full fix".
Click to expand...
Click to collapse
Because I assumed you wanted to roll back all the way to stock . If I knew you were good with non-stock kernel I'd have said full fix .
VoiceArtistUSA said:
Says there is an OTA update, after it downloads, I get tossed into CWM bootloader 6.1.1 and the update doesn't get applied.
All I do is choose 'reboot system'.
Click to expand...
Click to collapse
There is an updater app you can freeze to prevent this from running. Nicedream06 and motorhead1991 have it disabled w/o ill effects.
VoiceArtistUSA said:
"[ AT&T Address Book] Checking Subscriber Information"
when I touch contacts.
I am not an AT&T customer, I use STLK the BYOP program.
Click to expand...
Click to collapse
No ideas on this one. I'm an ATT subscriber and I don't remember that firing off, but I bought the phone the month it was released...
VoiceArtistUSA said:
We really need a custom ROM for this great device, no bloat, no AT&T updates, no AT&T bloatwares, No CIQ, No City ID.
I would be HAPPY to PAY for a custom ROM and have it delivered two weeks from last Thursday. Jellybean?
Click to expand...
Click to collapse
Working on it with a few others "right now". We have stable boot in ICS (CM9 and AOSP builds) but the modem is dead. No cell service at all. There are other problems but we are focused on getting the antenna up and going.
VoiceArtistUSA said:
Someone like me who chooses a rugged phone may not be into all the bells and whistles, so a basic stripped down
ROM would be great.
Click to expand...
Click to collapse
Check the super thread. I have an ODIN image that is pretty stripped down and it includes the 6.x version of CWR. I left a few things in "just in case" but they can easily be stripped out using any of the various root tools for removing system apps.
VoiceArtistUSA said:
and yes, I am getting lag coming out of deep sleep. may have to hit power button twice to unlock.
Can't wait to try Motorheads soon to be released power kernel...
Click to expand...
Click to collapse
If you can post over in motorhead's thread that you are experiencing the problem it will help out to know that it is common. He mentioned he was looking into it. I'm sure something will be ready soonish.

kemonine96 said:
I'm glad to hear it's working again for you.
Because I assumed you wanted to roll back all the way to stock . If I knew you were good with non-stock kernel I'd have said full fix .
There is an updater app you can freeze to prevent this from running. Nicedream06 and motorhead1991 have it disabled w/o ill effects.
No ideas on this one. I'm an ATT subscriber and I don't remember that firing off, but I bought the phone the month it was released...
Working on it with a few others "right now". We have stable boot in ICS (CM9 and AOSP builds) but the modem is dead. No cell service at all. There are other problems but we are focused on getting the antenna up and going.
Check the super thread. I have an ODIN image that is pretty stripped down and it includes the 6.x version of CWR. I left a few things in "just in case" but they can easily be stripped out using any of the various root tools for removing system apps.
If you can post over in motorhead's thread that you are experiencing the problem it will help out to know that it is common. He mentioned he was looking into it. I'm sure something will be ready soonish.
Click to expand...
Click to collapse
The lag is a noted issue, along with the WiFi shutting off randomly and intermittently. I'm researching these issues as much as I can to find a fix, but I can only do so much so fast .

I was going to start a new thread but then I found this. I too had the issue with I the wifi turning off and the screen lag. After reflashing the no bloat Odin image and the 1.1 kernel my wifi turns on, but does not find any networks. It just searches then shuts off? Any ideas? I wonder if the stock kernel being worked on would fix this or if there is something else wrong. Any help would be greatly appreciated.
Sent from my SAMSUNG-SGH-I847 using xda premium

I sent the rugby smart to SAM to have it completely reloaded. when it comes back, i will try to make a back up much like i make an image of a hard drive...if that's possible.
For my PC, I have an image of this existing hard drive. If i pull it out and put in a BLANK hard drive, I can write the image to the new disk with all my apps installed...I use that feature often with my pc's and others...for mine, I frequently make a new updated image and delete the oldest one.
Once I change the bootloader, is it possible to get it back if I backed up with with Kies?

You guys are in luck. Kernel1.2 should be out shortly with the lag and wifi fixed . I'm waiting to hear back from another tester, but so far ut's proven stable. I've only had one error pop up, and that was after running pretty hard.

Motorhead1991, Is this for the Samsung Rugby Smart?
How much of, if any, overclocking??
Can you also tweak a non-overclocked version without "City ID" app, "Carrier IQ" app and possibly no AT&T bloatware??
You rock for everything thus far

No overclocking just yet, but I'm giving it hell. On the bright side, Kemonine and myself are currently treading in uncharted territory for this device (see if anyone gets my reference)
And to answer your question, yes it'll be for the Rugby.

iam not sure
thats a good question

Motorhead1991 said:
And to answer your question, yes it'll be for
the Rugby.
Click to expand...
Click to collapse
After a day of use, it seems very stable and even more efficient.

That is great news! Can't wait to test
Sent from my SAMSUNG-SGH-I847 using xda premium

alan2424m said:
thats a good question
Click to expand...
Click to collapse
Yeah, it actually did hurt to ask that one.

So after flashing the following new odin images
•Stock boot / kernel:
•Stock Boot + Stock Recovery + Stock System:
•Stock Boot + CWR 6.0.1.2 + No Bloat System:
My WiFi still turns on, searches for a while, finds nothing and turns back off! I have no idea what to do next. Any ideas?

ESPFreak said:
So after flashing the following new odin images
•Stock boot / kernel:
•Stock Boot + Stock Recovery + Stock System:
•Stock Boot + CWR 6.0.1.2 + No Bloat System:
My WiFi still turns on, searches for a while, finds nothing and turns back off! I have no idea what to do next. Any ideas?
Click to expand...
Click to collapse
When you flashed via ODIN did it show it was flashing the boot area? In the status window it should tell you which images are being flashed to the device. Can you re-try the stock boot/kernel ODIN image and confirm it did flash the boot image?

That is the only thing that booted. As soon as I selected the image I got a "MD5 checksum failed" prompt. The "start" button changed to the same message but it let me click it and it loads the boot.img. Does that help at all?
Sent from my SAMSUNG-SGH-I847 using xda premium

[Q] Flashing to stock - phone force closes process com.android.phone, help

Please bare with me since this is the first time having to post for an issue since I usually find an answer on your forums
So here's the situation.
I bought the photon q 4g lte from ebay and it came with the unlocked bootloader.
Needless to say it was with the stock ics and i tried to find a jellybean update because it wasn't taking the ota and ended up going with cyanogen since i had no problems before. However those phones i had before were with sim cards not cdma.
I found out i couldn't update prl or profile manually without having to do something on the pc.
So after searching left and right i found i could use rsl lite (I used 6.1.5) and eventually found the "stock" file from this post
http://forum.xda-developers.com/showthread.php?t=2095536&highlight=rsd+lite
I did the stock jellybean, got it to go through the process and it booted up with no errors.
However, when it boots into the os it pops up a force close on omadmclient_sprint_dataservice and eventually also on the process com.android.phone.
I tried putting it in airplane mode to see if the service error would go away but it didn't work for the process part crashing.
I tried re-flashing, deleting cache in recovery, doing a data/factory reset in recovery and the one time i was able to do a data factory reset within the settings menu.
I could not find anyone that said they had a rom that worked with sprint and updating prl within the rom, if anyone knows of one let me know and i will flash it through rsd.
Otherwise does anyone have an idea of what could be happening because googling the omadmclient part did not pull up anything specific and pulling up the process issue for other phones has not helped me either.

Was this a hacked GSM phone, or are you using it as CDMA?
I've never heard of people having FC issues after flashing a FXZ from RSD. Which one did you flash? Android 4.1.2 - Sprint US - 9.8.2Q-122_XT897_FFW-5 (No simlock) ?
If you are on stock, you should be able to update the PRL within the ROM.

I was trying to use it with cdma network through sprint. and yeah that was the file i downloaded, had to remove the getvar to get it working but flashed with no errors after doing that.
As for updating the prl i can barely navigate through the phone, there is no home page loading and the process pop comes up often enough that its hard to go through the settings

crispy6 said:
I was trying to use it with cdma network through sprint. and yeah that was the file i downloaded, had to remove the getvar to get it working but flashed with no errors after doing that.
As for updating the prl i can barely navigate through the phone, there is no home page loading and the process pop comes up often enough that its hard to go through the settings
Click to expand...
Click to collapse
Sounds like something went wrong mate. Are you already activated on Sprint? I don't know if that would matter, it might.
I would honestly redownload and redo the RSD process.

arrrghhh said:
Sounds like something went wrong mate. Are you already activated on Sprint? I don't know if that would matter, it might.
I would honestly redownload and redo the RSD process.
Click to expand...
Click to collapse
I originally tried to activate the phone through cyanogen and then when the rep said he couldnt do it because of the lack of prl to update within the rom we just setup the activation back on the old phone/ That phone is working on the network.
I re-downloaded the file just in case and re-flashed but same problem. The only thing i thought of was maybe updating the radio but since its a stock rom it should work out of the gate. whats also weird is i tried turning wifi on but it didnt work either.
Anychange you know of a rom that works with sprint. I dont care if its stock since i would probably root later again.

crispy6 said:
I originally tried to activate the phone through cyanogen and then when the rep said he couldnt do it because of the lack of prl to update within the rom we just setup the activation back on the old phone/ That phone is working on the network.
I re-downloaded the file just in case and re-flashed but same problem. The only thing i thought of was maybe updating the radio but since its a stock rom it should work out of the gate. whats also weird is i tried turning wifi on but it didnt work either.
Anychange you know of a rom that works with sprint. I dont care if its stock since i would probably root later again.
Click to expand...
Click to collapse
Which one are you flashing?
Try another perhaps...? I honestly have never heard of this. It sounds like the phone might be damaged, or the RSD process just did not flash correctly.
I guess I should ask, was the phone modified at all for the GSM SIM slot mod? I wonder if having a non-Sprint SIM in is messing with it... That is just a shot in the dark.

arrrghhh said:
Which one are you flashing?
Try another perhaps...? I honestly have never heard of this. It sounds like the phone might be damaged, or the RSD process just did not flash correctly.
I guess I should ask, was the phone modified at all for the GSM SIM slot mod? I wonder if having a non-Sprint SIM in is messing with it... That is just a shot in the dark.
Click to expand...
Click to collapse
so far the only rom i tried was 10.1 cyanogen and the stock rom for jellybean. However for the stock rom it doesnt let me downgrade to ics with rsd 6.1.5 do you think if i downloaded an old version i could downgrade to a lower stock rom?
Also I honestly had not looked for the cdma roms since most of what i saw was troubleshooting related for this phone but i just saw this rom -AOKP 4.2.2 (Android Open Kang Project) (CDMA&GSM) that you created - http://forum.xda-developers.com/showthread.php?t=2293892
I re-rooted and installed that one and it looks great, just wondered how you got sprint to activate the phone or if you had done it before changing the rom? Also how would the prl and profile be updated.
Lastly the wifi wasn't turning on this time either, it did work initially when i got the phone so that has me stumped.

crispy6 said:
so far the only rom i tried was 10.1 cyanogen and the stock rom for jellybean. However for the stock rom it doesnt let me downgrade to ics with rsd 6.1.5 do you think if i downloaded an old version i could downgrade to a lower stock rom?
Also I honestly had not looked for the cdma roms since most of what i saw was troubleshooting related for this phone but i just saw this rom -AOKP 4.2.2 (Android Open Kang Project) (CDMA&GSM) that you created - http://forum.xda-developers.com/showthread.php?t=2293892
I re-rooted and installed that one and it looks great, just wondered how you got sprint to activate the phone or if you had done it before changing the rom? Also how would the prl and profile be updated.
Lastly the wifi wasn't turning on this time either, it did work initially when i got the phone so that has me stumped.
Click to expand...
Click to collapse
To downgrade to ICS, you need to remove some additional lines. See this post for more information on that.
However, you should be able to update the PRL on either stock ROM.
I think I said this before, but I will say it again. You need to do PRL updates, activate the phone, and get EVERYTHING working on stock BEFORE you flash ANY custom ROM. This is just standard practice - you don't want to put the cart before the horse! Get the phone working, then play with custom ROM's.

[Q&A] [STOCK ROM][5.0] OA6 Android L Deodexed

Q&A for [STOCK ROM][5.0] OA6 Android L Deodexed
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [STOCK ROM][5.0] OA6 Android L Deodexed. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

Wifi
I flashed as directed, and it is running. The issue I have is wifi keeps disconnecting and reconnecting. I was running MOAR and it was great, but it would not roam, it was stuck on CDMA. Now this will not stay connected to wifi.

tedmales said:
I flashed as directed, and it is running. The issue I have is wifi keeps disconnecting and reconnecting. I was running MOAR and it was great, but it would not roam, it was stuck on CDMA. Now this will not stay connected to wifi.
Click to expand...
Click to collapse
Not sure. Did you also flash the wifi calling fix and toggles addon in Post #2?
Just wondering if that had anything to do with it.
You can try reflashing the full stock tar and see if its doing it there. Then try reflashing the deodexed rom without the wifi calling fix, test it again and then flash with wifi calling fix at the very end to see if that's what is giving you the problem.
---------- Post added at 01:36 PM ---------- Previous post was at 01:18 PM ----------
@tedmales
I've added a stock features.xml flashable to Post #2 of the home thread. Flash that first to see if it resolves any of your issues. If it doesn't, follow the other directions I posted. Not sure what else to try.
Cheers - TD

Is it possible to flash the 4.4.2 kernel and use towel root with Knox at 0x0 and flash back?
I was able to do this on 4.4.4
Sent from my SM-G900P using XDA Free mobile app

tdunham said:
Not sure. Did you also flash the wifi calling fix and toggles addon in Post #2?
Just wondering if that had anything to do with it.
You can try reflashing the full stock tar and see if its doing it there. Then try reflashing the deodexed rom without the wifi calling fix, test it again and then flash with wifi calling fix at the very end to see if that's what is giving you the problem.
---------- Post added at 01:36 PM ---------- Previous post was at 01:18 PM ----------
@tedmales
I've added a stock features.xml flashable to Post #2 of the home thread. Flash that first to see if it resolves any of your issues. If it doesn't, follow the other directions I posted. Not sure what else to try.
Cheers - TD
Click to expand...
Click to collapse
Thanks for the quick reply. In a fit of rage about 330 last night I wiped and flashed my way back to moar 2.2. Only issue there is I noticed the OA6 modem is still on it and I tried to phone and it works. I will leave as is for the day and try again tonight using your advice.
Thanks
Ted

tedmales said:
Thanks for the quick reply. In a fit of rage about 330 last night I wiped and flashed my way back to moar 2.2. Only issue there is I noticed the OA6 modem is still on it and I tried to phone and it works. I will leave as is for the day and try again tonight using your advice.
Thanks
Ted
Click to expand...
Click to collapse
Hey Ted, someone in the main thread with the same issue with wifi said he turned off Smart network switching or something in advanced wifi settings and that fixed it for him. Myself, I always uncheck all the boxes in there...

[STOCK ROM][5.0] OA6 Android L Deodexed is the best!
Loving this ROM. It has everything I need except for a wireless charging notification toggle. Would NKD New Stuff Rev. 1.3 run on OA6?

tdunham said:
Hey Ted, someone in the main thread with the same issue with wifi said he turned off Smart network switching or something in advanced wifi settings and that fixed it for him. Myself, I always uncheck all the boxes in there...
Click to expand...
Click to collapse
I had the issue with constantly losing Wifi connection when standing less than 10 feet from my router. I turned off Smart Network Switching and the problem went away. Battery life improved drastically as well since my phone was no longer trying to pull all its data from the network.

Debloat seems to remove Pro Audio functionallity
Hey tdunham!
I finally got a chance to try out your OA6 ROM, and I'm really enjoying it! I just wanted to follow up on the pro audio functionality I had posted about in the MOAR 5.0 thread, or what might be another cause.
So I followed all the instructions, wiped, odined stock and recovery, flashed the ROM, flashed the debloat package, booted up, everything worked fine. First thing I did was download the galaxy store so I could try the pro audio application amplitube and soundcamp, same issues I had in MOAR, force closes on Soundcamp, no audio input through the mic.
Just to make sure it wasn't firmware, I flashed back to stock, everything with the pro audio apps worked well. Then I wiped and reflashed your ROM without the debloat package, and low and behold, the pro audio functionality worked fine. So whatever it is that cripples it is in what gets removed from the bloat I'm guessing, something that wasn't removed in the International BOA3 based ROM either. I'm fine living with all of the sprint apps, just a few more boxes to un-tick and things to hide in the launcher, but just thought I'd mention it in case anyone else runs into these issues.
Thanks again for all the great work!

hugantic said:
Hey tdunham!
I finally got a chance to try out your OA6 ROM, and I'm really enjoying it! I just wanted to follow up on the pro audio functionality I had posted about in the MOAR 5.0 thread, or what might be another cause.
So I followed all the instructions, wiped, odined stock and recovery, flashed the ROM, flashed the debloat package, booted up, everything worked fine. First thing I did was download the galaxy store so I could try the pro audio application amplitube and soundcamp, same issues I had in MOAR, force closes on Soundcamp, no audio input through the mic.
Just to make sure it wasn't firmware, I flashed back to stock, everything with the pro audio apps worked well. Then I wiped and reflashed your ROM without the debloat package, and low and behold, the pro audio functionality worked fine. So whatever it is that cripples it is in what gets removed from the bloat I'm guessing, something that wasn't removed in the International BOA3 based ROM either. I'm fine living with all of the sprint apps, just a few more boxes to un-tick and things to hide in the launcher, but just thought I'd mention it in case anyone else runs into these issues.
Thanks again for all the great work!
Click to expand...
Click to collapse
Just wondering, did you install v1.1 of the deodexed rom?
And below is the list of what gets deleted in the debloat tool, see anything that sticks out?
Code:
delete_recursive("/system/app/Blurb");
delete_recursive("/system/app/Books");
delete_recursive("/system/app/Drive");
delete_recursive("/system/app/DriveLink");
delete_recursive("/system/app/DriveLinkRemote");
delete_recursive("/system/app/Flipboard");
delete_recursive("/system/app/GeoLookout");
delete_recursive("/system/app/Headlines");
delete_recursive("/system/app/Music2");
delete_recursive("/system/app/Newsstand");
delete_recursive("/system/app/PlayGames");
delete_recursive("/system/app/SamsungAppsWidget_Phone_Carrier");
delete_recursive("/system/app/SecKidsModeInstaller");
delete_recursive("/system/app/Videos");
delete_recursive("/system/priv-app/ConnectionManager");
delete_recursive("/system/priv-app/ID");
delete_recursive("/system/priv-app/SamsungApps_K");
delete_recursive("/system/priv-app/SamsungBilling");
delete_recursive("/system/app/SecurityLogAgent");
delete_recursive("/system/priv-app/SNS");
delete_recursive("/system/priv-app/Zone");

My guess would be the Samsung Billing being removed as was stated by the other person after installing the Samsung App it still fc'd. Just a guess though
Sent from my SM-G900P using Tapatalk

no sprint yellow boot screen missing?
I had this issue awhile back on the first ROM that was released when the phone came out. The yellow boot screen is still included. along with pretty much every carriers custom boot animation. The problem is that csc file was rewritten to XAS, you want it to be SPR. This is the app I used to changed mine when it got changed. The downfall is that it wipes your phone and you have to start over, it could work with a backup but I usually just start from scratch anyway. Most of my data is cloud based so once I log into the apps I use nothing has changed. It also says it doesn't work with custom roms but it did work for me, on a dioxide custom rom. I cannot verify it works on 5.0 and I'm currently working on testing it if it can, unless you can get it completed yourself faster then I can.
https://play.google.com/store/apps/details?id=com.manniakk.cscselector&hl=en
---------- Post added at 06:39 PM ---------- Previous post was at 06:29 PM ----------
I currently cannot download this rom as androidfilehost is down so I will figure out a way to test on boa6 stock with cf-auto root in the mean time.
On stock 5.0 BOA6 with root via cf-autoroot, I was able to rewrite the CSC from SPR to XAS/BST and back to SPR. It does indeed wipe your device so make sure to back up before use, or be prepared to start from scratch clean install of rom

deoxed boot animation fix
Ok a separate post for what I did. I flashed the BOA6 deoxed with CWM, flashing debloated and stock boot animation right after and before first boot. I let the device boot (10-15) minutes then did a basic setup to install CSC changer from the play store. I changed from XAS to SPR and let the app complete its processes, this included a reboot to a special recovery. The phone then rebooted with the sprint boot animation and continued to first set up where I then set my phone up as I wanted. I do not think a recovery will work as the XAS CSC would be in a back up before using CSC changer. however the app does do its job as far as getting the sprint boot animation back.
Hope this helps

ADB Shell does not work
I recently installed this ROM and am having issues getting the shell to cooperate. Whenever i attempt to run any command in the shell I am given a response of "Aborted". Any ideas?

tdunham said:
Code:
delete_recursive("/system/app/Blurb");
delete_recursive("/system/app/Books");
delete_recursive("/system/app/Drive");
delete_recursive("/system/app/DriveLink");
delete_recursive("/system/app/DriveLinkRemote");
delete_recursive("/system/app/Flipboard");
delete_recursive("/system/app/GeoLookout");
delete_recursive("/system/app/Headlines");
delete_recursive("/system/app/Music2");
delete_recursive("/system/app/Newsstand");
delete_recursive("/system/app/PlayGames");
delete_recursive("/system/app/SamsungAppsWidget_Phone_Carrier");
delete_recursive("/system/app/SecKidsModeInstaller");
delete_recursive("/system/app/Videos");
delete_recursive("/system/priv-app/ConnectionManager");
delete_recursive("/system/priv-app/ID");
delete_recursive("/system/priv-app/SamsungApps_K");
delete_recursive("/system/priv-app/SamsungBilling");
delete_recursive("/system/app/SecurityLogAgent");
delete_recursive("/system/priv-app/SNS");
delete_recursive("/system/priv-app/Zone");
Click to expand...
Click to collapse
Yeup, running version 1.1, which is really nice and smooth by the way.
Unfortunately nothing in there looks significant in terms of this functionality, so I have no idea what the professional audio system is associated with that keeps getting broken. Just to check though I made a nandroid backup after I set up the phone this time, then flashed the debloat (v1.2) tool...it was strange, it seemed like it worked for a minute, but then after not using it for a while the professional audio related apps started glitching again. Restarted, still glitched, restored to before I flashed the debloat package and it all worked again. It's been about a day or so and haven't had a problem since.

unable to install apps error 491 after installing this rom
I can't install anything since installing this rom.. All i get is an unable to install error 491.... Any ideas?

hugantic said:
Yeup, running version 1.1, which is really nice and smooth by the way.
Unfortunately nothing in there looks significant in terms of this functionality, so I have no idea what the professional audio system is associated with that keeps getting broken. Just to check though I made a nandroid backup after I set up the phone this time, then flashed the debloat (v1.2) tool...it was strange, it seemed like it worked for a minute, but then after not using it for a while the professional audio related apps started glitching again. Restarted, still glitched, restored to before I flashed the debloat package and it all worked again. It's been about a day or so and haven't had a problem since.
Click to expand...
Click to collapse
My guess would be the Samsung Billing being removed as you stated you only installed just the Samsung App. There is also a SamsungBilling App that gets removed also. If its a paid app its probably trying to check on something to verify its not a pirated app. Just a guess though [emoji780]
Sent from my SM-G900P using Tapatalk

Internal Storage Double COunted
I'm having a problem whereas I'm getting notices that I'm running out of space and I know that I'm not.
I'm seeing a "/storage/emulated/legacy " path and a "/storage/SD Card" path. Is it possible that both are being counted against my total space count?
Is it possible to fix this? I'm backed up so formatting it or some other way that may erase just the contents of the internal card isn't a problem.
Everything else seems to be working fine. I haven't seen any of the reported issues.

battery drain?
Is anybody experiencing a high amount of battery drain. I flashed fresh last night and used ktoonez updated kernel to fix the 491 play store error... i dropped 30% battery in 1.5 hours this morning..

F22loader said:
I'm having a problem whereas I'm getting notices that I'm running out of space and I know that I'm not.
I'm seeing a "/storage/emulated/legacy " path and a "/storage/SD Card" path. Is it possible that both are being counted against my total space count?
Is it possible to fix this? I'm backed up so formatting it or some other way that may erase just the contents of the internal card isn't a problem.
Everything else seems to be working fine. I haven't seen any of the reported issues.
Click to expand...
Click to collapse
Something may have gone wrong in the flash continuum. For me, I didn't OTA at all. I Odin-ed the tarball and everything is fine except for showing I am "Custom".
7.04 Gb still available....even after the flash of TDunham's Deodex.
---------- Post added at 01:17 AM ---------- Previous post was at 01:12 AM ----------
exodusprime1337 said:
Is anybody experiencing a high amount of battery drain. I flashed fresh last night and used ktoonez updated kernel to fix the 491 play store error... i dropped 30% battery in 1.5 hours this morning..
Click to expand...
Click to collapse
Unless heavy web surfing/app using, that's a little heavy. I'm not sure what your settings are, but I did find that the Ktoonservative setting doesn't do for Lollipop what it used to on KitKat. I am set to 2475 over 300, Conservative @ bfq, No overclocking and no undervolting. GPU turned up full blast. KThermal only and Thermald enabled.
I go about 18-20 hours. I CAN get more, but I never turn data/GPS off. We wanted Lollipop and we got it. Ya gotta pay to play. It drains juice.
---------- Post added at 01:20 AM ---------- Previous post was at 01:17 AM ----------
elwood said:
My guess would be the Samsung Billing being removed as you stated you only installed just the Samsung App. There is also a SamsungBilling App that gets removed also. If its a paid app its probably trying to check on something to verify its not a pirated app. Just a guess though [emoji780]
Sent from my SM-G900P using Tapatalk
Click to expand...
Click to collapse
This is just ONE idea(and it may not work for everyone).
I had the old backup from TiBu. I restored it(app only) and it stuck. I can do everything in Samsung's app store.

LG G3- WiFi and Bluetooth will Not Turn On, Battery Life Decreasing

A whole list of problems
Hi guys,
I was wondering what could be wrong with my phone:
Basically, I noticed that my battery life starting to decrease. I went ahead and invested in Anker batteries (comes with two of them) so I could basically improve my battery life.
I also had installed an app called Smart Wifi (an app that would detect the wifi's in my home and switch to the strongest/turn off when none detected) in that time period.
Now the current issues I have about a week later:
1. My wifi won't turn on. It's stuck on "turning on" but never does. I think Bluetooth is doing something similar
2. I will have a fully charged battery inside and the phone will eventually go black. I think it's still on because the phone stays warm. I can't seem to revive it. To fix it, I have to remove the battery and re-insert it.
I tried doing a factory reset and that fixed some of the slowing down problems. The black screen and wifi problem is still there. I'm not too good at this stuff, so any insight would be appreciated. I was considering rooting my phone and seeing if I could solve anything after installing a custom ROM but I wanted another pair of opinions first.
Thanks!

datguruguy said:
Hi guys,
I was wondering what could be wrong with my phone:
Basically, I noticed that my battery life starting to decrease. I went ahead and invested in Anker batteries (comes with two of them) so I could basically improve my battery life.
I also had installed an app called Smart Wifi (an app that would detect the wifi's in my home and switch to the strongest/turn off when none detected) in that time period.
Now the current issues I have about a week later:
1. My wifi won't turn on. It's stuck on "turning on" but never does. I think Bluetooth is doing something similar
2. I will have a fully charged battery inside and the phone will eventually go black. I think it's still on because the phone stays warm. I can't seem to revive it. To fix it, I have to remove the battery and re-insert it.
I tried doing a factory reset and that fixed some of the slowing down problems. The black screen and wifi problem is still there. I'm not too good at this stuff, so any insight would be appreciated. I was considering rooting my phone and seeing if I could solve anything after installing a custom ROM but I wanted another pair of opinions first.
Thanks!
Click to expand...
Click to collapse
I have the same problem today.
Factory reset and installing orginal rom don't fix problem :/

datguruguy said:
Hi guys,
I was wondering what could be wrong with my phone:
Basically, I noticed that my battery life starting to decrease. I went ahead and invested in Anker batteries (comes with two of them) so I could basically improve my battery life.
I also had installed an app called Smart Wifi (an app that would detect the wifi's in my home and switch to the strongest/turn off when none detected) in that time period.
Now the current issues I have about a week later:
1. My wifi won't turn on. It's stuck on "turning on" but never does. I think Bluetooth is doing something similar
2. I will have a fully charged battery inside and the phone will eventually go black. I think it's still on because the phone stays warm. I can't seem to revive it. To fix it, I have to remove the battery and re-insert it.
I tried doing a factory reset and that fixed some of the slowing down problems. The black screen and wifi problem is still there. I'm not too good at this stuff, so any insight would be appreciated. I was considering rooting my phone and seeing if I could solve anything after installing a custom ROM but I wanted another pair of opinions first.
Thanks!
Click to expand...
Click to collapse
i hv the same problem in my Lg g3 D855. Sometimes when i restart my phone, the wifi is working.. but the phone will shut down itself suddenly..... guys please help

.I also have this issue. Anyone found any solution

Same problem here. Reset factory and flashing don't help. My battery is draining by Android OS proccess.

For all of the posters on this thread. I may have a solution. I have a zip toolkit that has everything you need to do a complete restore of your d850. It will replace every bit of code that sometimes flashing a new rom doesnt. Now it will have to wait because there is one bug in the instructions that I accidently left out when i helped another guy, so iv contacted him so he could tell me what it was that I missed. But the process ill post here very soon should fix your problems.
---------- Post added at 08:27 AM ---------- Previous post was at 08:15 AM ----------
Here is the link for the file to download. This zip has everything you need to restore your g3 d850 to complete stock (better than factory reset). And has what you need for root.
https://drive.google.com/file/d/0B4FtiSFGCyvHaUlJSGREYm5RRnc/view?usp=drivesdk
********READ QUICK INFO BELOW******
Theres a bit of instruction missing from the included guide so here it is to save yall a confusing headache.
" You have to check mark the "board" box, not SW update...we are downgrading, not upgrading. If you check mark the SW upgrade box, you will end up in a factory reset 2 screen. If that happens just reflash again."

So my problem happened downgrading from marshmallow to kk using lgup. After i used flashtool i didnt get a mini os screen like i always have before it just bootloops but if i keep the battery out long enough it does boot and shows att logo then restarts and bootloops again. The only thing that works is using lollipop kdz from d850pr but i dont get wifi bluetooth or hotspot and the battery drains fast. I wish there was a tot for lollipop i know that would fix it. I did root the d850pr and tried flashing a rooted 20f stock rom but i get boot srcurity and i have to flash all over again. I really dont know why its bootlooping
---------- Post added at 06:40 PM ---------- Previous post was at 06:33 PM ----------
Shadow Assassin said:
For all of the posters on this thread. I may have a solution. I have a zip toolkit that has everything you need to do a complete restore of your d850. It will replace every bit of code that sometimes flashing a new rom doesnt. Now it will have to wait because there is one bug in the instructions that I accidently left out when i helped another guy, so iv contacted him so he could tell me what it was that I missed. But the process ill post here very soon should fix your problems.
---------- Post added at 08:27 AM ---------- Previous post was at 08:15 AM ----------
Here is the link for the file to download. This zip has everything you need to restore your g3 d850 to complete stock (better than factory reset). And has what you need for root.
https://drive.google.com/file/d/0B4FtiSFGCyvHaUlJSGREYm5RRnc/view?usp=drivesdk
********READ QUICK INFO BELOW******
Theres a bit of instruction missing from the included guide so here it is to save yall a confusing headache.
" You have to check mark the "board" box, not SW update...we are downgrading, not upgrading. If you check mark the SW upgrade box, you will end up in a factory reset 2 screen. If that happens just reflash again."
Click to expand...
Click to collapse
Ive tried your instructions a few hundred times lol samething. Bootloops

lingo2012 said:
So my problem happened downgrading from marshmallow to kk using lgup. After i used flashtool i didnt get a mini os screen like i always have before it just bootloops but if i keep the battery out long enough it does boot and shows att logo then restarts and bootloops again. The only thing that works is using lollipop kdz from d850pr but i dont get wifi bluetooth or hotspot and the battery drains fast. I wish there was a tot for lollipop i know that would fix it. I did root the d850pr and tried flashing a rooted 20f stock rom but i get boot srcurity and i have to flash all over again. I really dont know why its bootlooping
---------- Post added at 06:40 PM ---------- Previous post was at 06:33 PM ----------
Ive tried your instructions a few hundred times lol samething. Bootloops
Click to expand...
Click to collapse
Well that sucks, it had worked for someone els so it maybe a fluke. An unfortunate one... So one thing to try now is this---
1. Download LG PC Suite here. Don’t worry about USB drivers, this program will automatically install them.
2. Turn your LG G3 off.
3. Connect your LG G3 to your computer and hold the Volume Up button.
4. This will put your phone into Download Mode.
5. After a few seconds in Download mode,
Open LG PC Suite.
6. Tap on the Repair button and follow the steps that the program provides.
7. Wait for the program to fix your LG G3.
Hope this works. If not, ill keep looking for a fix. Im sorry your having these problems. It worked for me and another guy so idk why your bootlooping but I have heard that it can happen even when everything is done right. So lets see what happen. Let me know how the bootloop fix i provided works out.

Shadow Assassin said:
Well that sucks, it had worked for someone els so it maybe a fluke. An unfortunate one... So one thing to try now is this---
1. Download LG PC Suite here. Don’t worry about USB drivers, this program will automatically install them.
2. Turn your LG G3 off.
3. Connect your LG G3 to your computer and hold the Volume Up button.
4. This will put your phone into Download Mode.
5. After a few seconds in Download mode,
Open LG PC Suite.
6. Tap on the Repair button and follow the steps that the program provides.
7. Wait for the program to fix your LG G3.
Hope this works. If not, ill keep looking for a fix. Im sorry your having these problems. It worked for me and another guy so idk why your bootlooping but I have heard that it can happen even when everything is done right. So lets see what happen. Let me know how the bootloop fix i provided works out.
Click to expand...
Click to collapse
Fluke indeed lol its weird but ill try pc suite ill let you know thank you

lingo2012 said:
Fluke indeed lol its weird but ill try pc suite ill let you know thank you
Click to expand...
Click to collapse
So pc suite didnt work so i downloaded 10f tot and everythings working now except wifi and bluetooth. Bluetooth turns now but it doesnt find anything. So atleast its working ill read around about the bluettoth and wifi. Thank you for your help even if it didnt work it was worth a try

lingo2012 said:
So pc suite didnt work so i downloaded 10f tot and everythings working now except wifi and bluetooth. Bluetooth turns now but it doesnt find anything. So atleast its working ill read around about the bluettoth and wifi. Thank you for your help even if it didnt work it was worth a try
Click to expand...
Click to collapse
You have a completely new system so... Theres a chance its a hardware problem. It shouldnt since they are built into the SOC but your phone may have broken antennas. Ill keep looking to see what i can find. One thing to try is flash the nwest radio.

Shadow Assassin said:
You have a completely new system so... Theres a chance its a hardware problem. It shouldnt since they are built into the SOC but your phone may have broken antennas. Ill keep looking to see what i can find. One thing to try is flash the nwest radio.
Click to expand...
Click to collapse
Its weird everything was working until i downgraded from mm to kk. I flashed the newest radio its still not working. Im gonna keep looking around theres gotta be something and thank you again
---------- Post added at 06:11 AM ---------- Previous post was at 05:28 AM ----------
Shadow Assassin said:
You have a completely new system so... Theres a chance its a hardware problem. It shouldnt since they are built into the SOC but your phone may have broken antennas. Ill keep looking to see what i can find. One thing to try is flash the nwest radio.
Click to expand...
Click to collapse
Ok so i flashed Crdroid and my wifi is working now

lingo2012 said:
Its weird everything was working until i downgraded from mm to kk. I flashed the newest radio its still not working. Im gonna keep looking around theres gotta be something and thank you again
---------- Post added at 06:11 AM ---------- Previous post was at 05:28 AM ----------
Ok so i flashed Crdroid and my wifi is working now
Click to expand...
Click to collapse
That was weird, so everything is working ok now?

Shadow Assassin said:
That was weird, so everything is working ok now?
Click to expand...
Click to collapse
Yeah its crazy and when i go back to stock wifi and bluetooth dont work

lingo2012 said:
Yeah its crazy and when i go back to stock wifi and bluetooth dont work
Click to expand...
Click to collapse
Its probably a corrupt file. Since its working on the rom you just flashed, then ill bet the stock rom file is corrupt. It happens. But glad to see everything it working. Im running CloudyG3 its stock based and it works wonders for me.

Shadow Assassin said:
Its probably a corrupt file. Since its working on the rom you just flashed, then ill bet the stock rom file is corrupt. It happens. But glad to see everything it working. Im running CloudyG3 its stock based and it works wonders for me.
Click to expand...
Click to collapse
I ran cloudy g3 i love it im gonna give that a try and see

datguruguy said:
Hi guys,
I was wondering what could be wrong with my phone:
Basically, I noticed that my battery life starting to decrease. I went ahead and invested in Anker batteries (comes with two of them) so I could basically improve my battery life.
I also had installed an app called Smart Wifi (an app that would detect the wifi's in my home and switch to the strongest/turn off when none detected) in that time period.
Now the current issues I have about a week later:
1. My wifi won't turn on. It's stuck on "turning on" but never does. I think Bluetooth is doing something similar
2. I will have a fully charged battery inside and the phone will eventually go black. I think it's still on because the phone stays warm. I can't seem to revive it. To fix it, I have to remove the battery and re-insert it.
I tried doing a factory reset and that fixed some of the slowing down problems. The black screen and wifi problem is still there. I'm not too good at this stuff, so any insight would be appreciated. I was considering rooting my phone and seeing if I could solve anything after installing a custom ROM but I wanted another pair of opinions first.
Thanks!
Click to expand...
Click to collapse
i have D850 and believe me i have had every issue with including the one you are talking about the best fix that kinda worked for me was :
1)open up the phone just remove the phiilip screws
2)besides the camera there is a connecting chip
3)place 2 small square pieces of paper on it covering it
4)close it up and see if it is fixed
if not just increase the number of papers
for a visual guide just watch it in youtube