Database Info

[Review] Choetech T510 Qi Wireless Car Charger Dock

This is a quick review of the Choetech T510 Qi Wireless Car Charger Dock I am using.
Packaging and what's in the box
The dock comes with pretty much everything you need (and more) -
- the wireless dock itself
- an adaptor to use it with the air vent in your car
- a suction cup to use on your windscreen / dash
- a suction disc you can place on your dash to place the suction cup on
- 2 (yes 2) USB to Micro USB cables, a short one for when using dock in air vent and a longer one for when using dock on dash or windscreen
- small stick on cable runners to keep the USB cable from flopping around while you drive
- cigarette lighter adaptor to plug the USB cables into (5V,2100mA output)
Compatibility
It's a generic dock, and is more than big enough for the S5, and fits the Note 3 nicely as well. I'd expect it would just barely fit a 6 inch phone (space between the arms of the dock is 9.5cm (3.47 in) ).
Even though it is a wireless charger, it still has space in the 'bottom' edge for a standard size micro USB charger connector for phones that have a micro USB charging port in the center on the bottom of the phone - this means you can plug the USB charger directly into your phone for a quicker charge (wireless charging is usually less efficient than wired charging) or you can use the same dock with phones that do not have wireless charging.
Stability
The suction cup works well on glass and the suction disc. I have not used it in my car's air vents as they are very weak and will not support the weight of the dock and phone - this will obviously be a limitation for any dock that uses car air vents.
So far, I have not noticed any more vibration / shaking on the phone when in the dock, compared to other docks I have used, but then I have only driven on tarred roads in good condition while using it.
One tip - as the arms are not as thick as they could have been, and thus not as strong as they could be, they do not grip as well as they probably should. The solution to this is to squeeze them good and tight, though I expect this will put more strain on them and may result in them not lasting as long as one would expect - only time will tell.
Build Quality
With most 'generic' products made in China, build quality is usually sacrificed in a bid to keep costs down. The arms on the dock look quite thin and I expect they would break quite easily under stress, especially taking my 'tip' above into consideration. That being said, I am quite impressed with the build quality of this dock. Even though it is quite 'plasticky' it still looks premium, and seems pretty well put together. Also, it does not have the expected 'rattles' you get with low build quality plastic devices.
All in all, I'm quite impressed with this dock, and even though it is comparatively expensive (when compared to generic non wireless docks), it's not a bad price for a generic wireless dock, considering all the extras that come in the box (my xProDock, which was not wireless, not generic, and cost more, did not even have a cigarette lighter adaptor, never mind handy cable runners).
-EDIT-
It seems that I was a little premature about commenting on the build quality, as it seems to have 'broken sort of'. It seems the plastic piece housing the suction cup and the plastic arm have partly come apart ever so slightly, but there is now a rattle and you can see vibrations in the phone when mounted. Maybe it was me that did something, but still, you'd expect it to last a little longer.
I use my phone for navigation and also as an in car DVR, so I use iBolt's Dock 'n Drive app, as it has built in support for DailyRoads Voyager.
In the screenshots below, you'll notice I have an NFC tag (yes I know I shoulda used a black one) on the dock. I use this in conjunction with the Trigger app to automatically enable bluetooth, turn off wireless, set volume to max, enable GPS (you need root for this option) and then launch iBolt Dock 'n Drive (I do not both enabling 'dock mode', or using the iBolt Dockmode app, as Samsung has removed dock mode from the S5)
Notes about using NFC and Wireless Charging
As I am not yet able to get the Samsung Wireless Charging Cover (but will when they are available), I have purchased a third party wireless charging receiver for my S5, which fits under the standard (non wireless) back cover, with only the slightest of bulges (yes I know it probably messes up the water resistance of the phone, but then I don;t usually leave it in a glass of water, or take it swimming) and it also allows me to use my Spigen Slim fit case. I am not sure if what I am about to describe is due to the wireless charging receiver I am using, but thought I would mention it anyway.
(This only applies to people that use a non swipe lock screen, as NFC is disabled when using a non swipe lock screen.)
When I put my phone in the dock, NFC will only pick up the tag in the dock if I have already unlocked the phone. This is because NFC does not seem to work once the phone is charging wirelessly. This means that if I put the phone in the dock while the phone is locked and it starts charging wirelessly, when I unlock the phone, NFC will not pick up the NFC tag.
- EDIT - kms108 has just confirmed that he does not have the issue with NFC and wireless charging when he uses the Genuine Samsung Wireless Charging kit (for desktop, not for car), so I guess the issue I am experiencing lies somewhere in the car dock, or the wireless receiver. I've ordered a Genuine Samsung Wireless Cover and will update this post on whether that has the same issues with NFC on this car dock.
Dock with windscreen suction cup
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
iBolt Dock 'n Drive
iBolt Dock 'n Drive with media controls, DailyRoads Voyager controls, and a compass
DailyRoads Voyager
Please hit that Thanks button if you found this review useful

Couple of questions...
Does the mount have a standard garmin 17mm ball mount on the back?
Have you watched it charge the phone when in use.... Ie screen on, gps on etc... As wireless chargers are generally low output, many can't charge more than the phone discharges.
Does it work with a handset with a case?
How would we know if the coil in the charger matches up to the location of the charger in the phone? I note that phones wireless receivers are in different places
Any pics of the rear of the mount and the handset in the mount with and without a case.
Cheers
Sent from my SM-G900F using Tapatalk

The T510 has 3 coils for multi positioning.

"Does the mount have a standard garmin 17mm ball mount on the back? " - No. Look at the picture I took of the dock disassembled and you will see where the ball mount is.
"Have you watched it charge the phone when in use.... Ie screen on, gps on etc... As wireless chargers are generally low output, many can't charge more than the phone discharges." - Yes. Depending on what you are doing, it will struggle to charge. When I tested with wifi on, BT on, GPS on, and recording video in background, battery went down about 1% in 6 minutes. I only had it plugged into the USB port of my PC (dunno how much it outputs, but I read it's only about 500mA), so may get different result in car. Adaptor that comes with dock puts out 5v at 2100mA, and dock itself has sticker that says input is 1500mA. So if efficiency is about <= 75% (as per the packaging) then I guess in a car you could expect a maximum of between 1125mA and 1575mA going to the phone wirelessly.
"Does it work with a handset with a case?" - Yes, but depends on the case obviously. Would not recommend using with a wallet / flip type case. My pictures show it being used with a Spigen Slim Fit case
"How would we know if the coil in the charger matches up to the location of the charger in the phone? I note that phones wireless receivers are in different places" - it beeps and starts charging. As kms108 says, there are three coils on this model (as per the picture below) to allow for different positions. To be honest, I had more difficulty finding the charging 'sweetspot' on my Lugulake charging pad than I did on this dock, as it works with no issues in the dock.
"Any pics of the rear of the mount and the handset in the mount with and without a case." - Sure, see below. No pictures without case, as it makes no difference.
You KNOW you wanna hit that thanks button
Shows 3 coils used on this model
Dock has a charge light which goes blue when charging (green means it is receiving power)
Disassembled, dock arm
Disassembled, dock itself, showing where adaptor that clips onto arm goes
Rear of dock when assembled
Phone in case, in dock
Phone in case, in dock, showing blue charging light

I'll order this once I can find a case that goes on the phone with the genuine wireless cover. Thanks for your time and answers.
Sent from my SM-G900F using Tapatalk

uberNoobZA said:
"Does the mount have a standard garmin 17mm ball mount on the back? " - No. Look at the picture I took of the dock disassembled and you will see where the ball mount is.
"Have you watched it charge the phone when in use.... Ie screen on, gps on etc... As wireless chargers are generally low output, many can't charge more than the phone discharges." - Yes. Depending on what you are doing, it will struggle to charge. When I tested with wifi on, BT on, GPS on, and recording video in background, battery went down about 1% in 6 minutes. I only had it plugged into the USB port of my PC (dunno how much it outputs, but I read it's only about 500mA), so may get different result in car. Adaptor that comes with dock puts out 5v at 2100mA, and dock itself has sticker that says input is 1500mA. So if efficiency is about <= 75% (as per the packaging) then I guess in a car you could expect a maximum of between 1125mA and 1575mA going to the phone wirelessly.
Click to expand...
Click to collapse
I have tested at home with WiFi on, Bluetooth streaming music on repeat mode to my Sony MW600 on, GPS on, NFC on, Air View on, Air Gesture on,
and the battery kept at 100%.

Anybody know how well this works with a Nillkin NJ003? I'm looking at wireless charging options for my car, and that's the charging module I'm putting in my phone..

Bought this yesterday based on the OP's comments about it, and unfortunately it wasn't a stable way to charge my S4. I was looking for something that was future proof for me to upgrade to an S5 Prime / Galaxy F / whatever the next thing will be called. I ordered it through Amazon Prime, did 1 day shipping since Saturday's are usually my only day to screw with stuff since I work M-F and live on the road most of the time during the week. Charger constantly goes in and out of charging, won't charge up my phone, and looks / feels so flimsy that I don't find it stable enough to securely hold my phone while driving.
You can see my full review, noting that it is in fact an Amazon Verified Purchase review, by clicking here if you like, but overall, I was very disappointed in this mount as I'd like to replace my iBolt with something I can use with my next phone and not look so "generic or universal" as many of these crap mounts do. Some might remember me for being the one who did the extensive review on the iBolt for the S4, just as detailed as this review was, but unfortunately, there are discrepancies with this charger from enough people that make this a hard purchase to make, contrary to how the iBolt was for the S4 - everyone who bought one liked it and knew it just worked. I want to be prepared for the future and iBolt hasn't come out with anything yet and that sucks, but without buying something device specific from ProClip, etc, I don't see any other way of guaranteeing a solid, consistent charge....
EDIT 1 - I've sent it back and received my refund for it already, and put in my Craigsdock (Samsung) mount last night, but Greenjia, the company who distributes these Choetech mounts on Amazon, apparently didn't like my review being posted there SO much that they're sending me another one for free to review and then hopefully change my review on Amazon.... two things with this, first, I have verified with them that I have already received a refund, put in a new dock, and will not pay for another one that I am nearly 100% certain won't be any different, and second, I told them repeatedly that I have no use for this dock since I have a far superior dock already installed in the car that doesn't rely on wireless charging, a technology that is far from perfect and will almost always have issues with flagship devices using a lot of power / radios / sensors / screen on all the time, etc. So we'll see, I will update with whatever happens.....

Qi Wireless Charging Kit

I was looking at this wireless charging kit for my Galaxy S4 I337 and I wanted to check here before wasting any money. Is this a legit product that works well or something I should avoid? Is there anything better if this is garbage? Thanks all!
http://www.ebay.com/itm/Qi-Wireless...S_Cell_Phone_PDA_Chargers&hash=item2ecf1d5a17

The receiver looks like it should fit. Whether or not it abides by the Qi standard I wouldn't dare guess about that. It has no company markings, just the Qi logo. But that wouldn't affect the phone itself just if the pad/receiver were compatible with other pads/receivers. Lastly I'm not going to bet it really can do 1000mha but for $19 I'd give it a shot if I hadn't already bought a set a while back.

mbnocx said:
I was looking at this wireless charging kit for my Galaxy S4 I337 and I wanted to check here before wasting any money. Is this a legit product that works well or something I should avoid? Is there anything better if this is garbage? Thanks all!
http://www.ebay.com/itm/Qi-Wireless...S_Cell_Phone_PDA_Chargers&hash=item2ecf1d5a17
Click to expand...
Click to collapse
That one is kind of old school.
Look for two things:
Chip located in the gap left where you insert the sd card...results in better back fit.
NFC included on the insert---not "works with NFC", acutally has an NFC loop and the other two connector pads for NFC
I can't find the one I bought, but the Nillkin one looks similar to mine.

Can anyone post a link to the product that they use that works really well? There are tons out there and I just want to make sure I don't pick one that is known to be junk.
Aside from the wireless receivers that fit in the existing back cover, I have thought about getting this official back cover and then just a generic charging pad. If I won't be able to use a case with either, I may prefer the extra bulk this back cover will cause instead of something that fits in the existing back cover. If what you have works with cases, let me know what type of case you use too.
http://www.amazon.com/Samsung-Galax...ywords=Galaxy+S4+wireless+charging+back+cover
Thanks!!!

mbnocx said:
Can anyone post a link to the product that they use that works really well?
Click to expand...
Click to collapse
This charger and receiver work well for me, I picked these based on user reviews:
I can't post links, so look on Amazon for : PowerBot® PB1020 Qi Enabled Wireless Charger , and the : Zitrades(TM) 2013 Latest Qi Standard wireless Charger receiver pad
The pad is thin and fits within the stock back cover.

Cool, thanks!

I bought these:
http://www.amazon.com/gp/product/B00CU7FO5C/
http://www.att.com/shop/wireless/ac...arging-plate-sku6290260.html#fbid=AVBWGlRN5tV
they work exceptionally well, charges through thick cases (I use a Trident Aegis) and though it can be a bit finicky on placement, it works really well and charges at about 675mha. Not the fastest but still good.

they work exceptionally well, charges through thick cases (I use a Trident Aegis) and though it can be a bit finicky on placement, it works really well and charges at about 675mha. Not the fastest but still good.[/QUOTE]
I have bought more then 3 qi charger for my s4 few months ago (price range from $15 to $35), and I finally gave up on these charger.
The charging speed is incredible slow and sometime makes the phone hot. If you put a QI charger in your office, in a busy day and your battery level is low, if you count on the qi charger, then it'll be defiantly a night mare. I'll prefer to wait for the next generation wireless charging technology to come available.

niking3 said:
I have bought more then 3 qi charger for my s4 few months ago (price range from $15 to $35), and I finally gave up on these charger.
The charging speed is incredible slow and sometime makes the phone hot. If you put a QI charger in your office, in a busy day and your battery level is low, if you count on the qi charger, then it'll be defiantly a night mare. I'll prefer to wait for the next generation wireless charging technology to come available.
Click to expand...
Click to collapse
very interesting. I've never had an issue with heat, neither with the charging pad nor the receiver in the phone even with the thick case on. I average with mysetup between 16 to 23% charge/hr it's no 40 or 50 I get with a proper wire/adapter setup, but it's more than enough at work and totally enough while sleeping. What was your receiver rated at? the one I linked to is rated at 1000mha (whether or not it charges that fast, I can't comment, my pad is only rated at 750).
What most people don't like about these types of chargers is you can't charge while you use it, phone has to be laying on the charger and all, or they have the screen to be set constantly on or whatever which will slow down your charging. Not saying these were your issues, but I'd recommend running a few tests, it sounds like you've tried different pads, have you bought another receiver for the phone? install an app to help monitor the battery charge and usage (I find battery monitor widget fairly accurate, it'll tell you your charge your charge percentage/hr). just my thoughts for you.

I ended up purchasing the following two items. I mainly need this for my work desk as I often run out of battery well before the end of a work day. Having this on my desk will help because I can charge more frequently and keep a higher battery meter. When I'm home I don't mind using a power cable as the way I'm setup works well there. Anyway, we'll see how this all works and I appreciate all the replies.
Receiver: http://www.amazon.com/dp/B00CU7FO5C/ref=pe_385040_30332190_TE_M3T1_ST1_dp_1
Charging Pad: http://www.amazon.com/dp/B00IXKVBAW/ref=pe_385040_30332190_TE_M3T1_ST1_dp_2

Theoriginalgiga said:
very interesting. I've never had an issue with heat, neither with the charging pad nor the receiver in the phone even with the thick case on. I average with mysetup between 16 to 23% charge/hr it's no 40 or 50 I get with a proper wire/adapter setup, but it's more than enough at work and totally enough while sleeping. What was your receiver rated at? the one I linked to is rated at 1000mha (whether or not it charges that fast, I can't comment, my pad is only rated at 750).
What most people don't like about these types of chargers is you can't charge while you use it, phone has to be laying on the charger and all, or they have the screen to be set constantly on or whatever which will slow down your charging. Not saying these were your issues, but I'd recommend running a few tests, it sounds like you've tried different pads, have you bought another receiver for the phone? install an app to help monitor the battery charge and usage (I find battery monitor widget fairly accurate, it'll tell you your charge your charge percentage/hr). just my thoughts for you.
Click to expand...
Click to collapse
I don't remember the rated mha, because I haven't used it for long time. Maybe they're the very first generation products with lots of problem.
But just like you said, you have to laying down the phone while it's charging, this is the biggest problem for me. In a working desk, you can still using your phone while the charging cable is connected, and the charging speed is incredibly faster then the QI charger, if you use the QI pad, you need to put it back to the pad every time, if you're busy, you don't have time to put it back and make sure they're properly aligned, that's why I eventually give up on the product.
But I just thinking, if some day in the future, the whole working desk can be a QI charger support your tablet and your phone's power, that will be a great invention for our everyday life.

niking3 said:
I don't remember the rated mha, because I haven't used it for long time. Maybe they're the very first generation products with lots of problem.
But just like you said, you have to laying down the phone while it's charging, this is the biggest problem for me. In a working desk, you can still using your phone while the charging cable is connected, and the charging speed is incredibly faster then the QI charger, if you use the QI pad, you need to put it back to the pad every time, if you're busy, you don't have time to put it back and make sure they're properly aligned, that's why I eventually give up on the product.
But I just thinking, if some day in the future, the whole working desk can be a QI charger support your tablet and your phone's power, that will be a great invention for our everyday life.
Click to expand...
Click to collapse
The starting Gen of inductive charging had a lot of problems, mainly weak circuits in detecting the phone requiring precise lining up. Things are a bit better now especially if you run a naked or think phone case.
Sounds like a brilliant DIY to build an entire desk Qi charging pad. From what I recall the Qi is just a fancy chipset that makes it compatible so someone could theoretically make a desk laced with charging coils if someone had the time, energy and money to do so
Personally I like Qi for home evenings and work. I don't play with my phone at work or whilst I sleep. I also don't keep games on my phone, eats up too much power. During the day and general use I depend on my battery and my cable/plug while on the go. Inductive charging isn't perfect, and frankly will never be in my opinion, but great for those too lazy to plug in their phone (like my gf) or those who get up and down and don't want the hassle of constantly unplugging and plugging their phone in every time. I see them in the same boat as smart watches. They have their niches none of which a normal person really NEEDS, but are fun to haves.

Theoriginalgiga said:
The starting Gen of inductive charging had a lot of problems, mainly weak circuits in detecting the phone requiring precise lining up. Things are a bit better now especially if you run a naked or think phone case.
Sounds like a brilliant DIY to build an entire desk Qi charging pad. From what I recall the Qi is just a fancy chipset that makes it compatible so someone could theoretically make a desk laced with charging coils if someone had the time, energy and money to do so
Personally I like Qi for home evenings and work. I don't play with my phone at work or whilst I sleep. I also don't keep games on my phone, eats up too much power. During the day and general use I depend on my battery and my cable/plug while on the go. Inductive charging isn't perfect, and frankly will never be in my opinion, but great for those too lazy to plug in their phone (like my gf) or those who get up and down and don't want the hassle of constantly unplugging and plugging their phone in every time. I see them in the same boat as smart watches. They have their niches none of which a normal person really NEEDS, but are fun to haves.
Click to expand...
Click to collapse
Actually the first generation qi receiver and transmitter was one of the best, Im still using the first generation transmitter from yijieneng, detect all my receiver upto now, and I still have a few first gen S3 receiver, they are built using the best chipset and coil, but because the price of the actual reciever cost more that the oem one itself or 4-5 times the prices of the current receivers on ebay, I don't put them up on ebay.
---------- Post added at 12:12 PM ---------- Previous post was at 12:02 PM ----------
mbnocx said:
Can anyone post a link to the product that they use that works really well? There are tons out there and I just want to make sure I don't pick one that is known to be junk.
Aside from the wireless receivers that fit in the existing back cover, I have thought about getting this official back cover and then just a generic charging pad. If I won't be able to use a case with either, I may prefer the extra bulk this back cover will cause instead of something that fits in the existing back cover. If what you have works with cases, let me know what type of case you use too.
http://www.amazon.com/Samsung-Galax...ywords=Galaxy+S4+wireless+charging+back+cover
Thanks!!!
Click to expand...
Click to collapse
I have this one, works with the S5 as well, but no link available.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Review: Note 4 Wireless charging cover Samsung EP-CN910IBU

A quick overview for those who might be thinking about the OEM Samsung wireless charging replacement back cover for the Note 4. I also get into a bit of risk vs cost analysis towards the end.
I have compared both the Qi version and the Powermat version. This information applies to both. They are physically identical. The only difference is which charging standard they support.
Model EP-CN910IBU
Output 5.0v 800mA
S/N RCIFA
MSIP-REM-SEC-EP-EP-CN910IWK
Made in Vietnam
MSRP $39
Be aware these replacement covers add thickness to the handset.
Stock handset (non charging cover) plus glass screen protector: 0.360"
Handset plus EP-CN910IBU wireless charging cover plus glass screen protector, 0.425"
The charging cover adds a net thickness of 0.065." While this doesn't sound like much, it is enough to prevent most cases / enclosures from fitting over the charging cover.
These measurements are taken with a precision micrometer (certified to an accuracy of +/- 0.002")
As a common reference, an average US $0.25 quarter measures 0.065."
Imagine wedging a layer of quarters in between your phone and your case. Chances are it won't fit. Do you really want to use an $800 device with no case? The only case option would be a dimensionally forgiving non rigid rubber bumper.
When used with a Duracell powermat, the charging works as expected, albeit at the slow 800mA charging speed. The sensitivity of proper placement of the phone, centered on the powermat is still an issue. Even a small 0.25" movement out of center will stop charging.
Here are some simple calculations that allow us to directly compare *maximum* charging speeds using the basic electrical formula of Volts x Amps = Watts
Standard Wall charger 5V x 2A = 10W
Samsung adaptive fast charger 9V x 1.67A = 15.03W
Samsung wireless charging cover 5V x 0.8A = 4W
This comparison shows the wireless back covers charge at a rate of that is 60% slower than a standard wall charger and 74% slower than the adaptive fast charger that shipped with our Note 4 devices. In my opinion, this wireless setup is only practical for overnight use and possibly as a trickle charger in an office / desktop environment. It is not practical for use as a primary daytime charging system during frequent and heavy use of the handset.
The cover was $39, the powermat was $50 for a combined cost of $90. Car charging cradles are presumably another $50-$70. As a completely wireless charging solution, this costs about $200 and takes 3-4 times longer to charge.
I purchased this setup as a safeguard against damage to the usb port form a lifetime of plugging in charging cords. I have experienced usb port damage / degradation on previous devices.
Conclusion:
Consider that most of us carry an insurance policy through our provider for about $7 / month ($168 spread out over 2 years.) If you ever use the insurance due to damage, theft or loss, we pay a $200 deductible. Consider that most of us will upgrade to a newer handset within 2 years. This gives us a combined contractual insurance cost of roughly $370 across the 2 year lifespan of the device, and only if you end up replacing the device for *any* reason, not just usb port damage. Otherwise you pay only the ~$170 over 2 years.
The cost of "physical" insurance by way of wireless charging and a rubber bumper case is well over $200 all at the time of equipment purchase.
In my opinion, this high cost and slow speed of wireless charging is not sensible. I will be returning the equipment and returning to corded charging and my favorite case. I will keep the contractual insurance thought At&t. This risk vs cost analysis with corded charging is acceptable to me.

Thank you for your thorough review. I just purchased the official case yesterday from Samsung with a 50% discount coupon, after which, I started researching reviews and cases for it and found that many of the cases I was contemplating on purchasing were no longer fitting. I previously owned the Note 2 with a stick-on qi wireless coil and it worked great so I was leaning towards the same solution for the Note 4 but reading reviews about them seemed to point that the fact that it interferes with the NFC module. I use SoftCard (formerly ISIS) on a daily basis so this leads me to use the OEM back.

el_chiefo said:
Thank you for your thorough review. I just purchased the official case yesterday from Samsung with a 50% discount coupon, after which, I started researching reviews and cases for it and found that many of the cases I was contemplating on purchasing were no longer fitting. I previously owned the Note 2 with a stick-on qi wireless coil and it worked great so I was leaning towards the same solution for the Note 4 but reading reviews about them seemed to point that the fact that it interferes with the NFC module. I use SoftCard (formerly ISIS) on a daily basis so this leads me to use the OEM back.
Click to expand...
Click to collapse
What's the 50off coupon?

h3ck said:
What's the 50off coupon?
Click to expand...
Click to collapse
When you register your note 4 with Samsung (and the samsung account), you should be emailed a coupon for 50% of of items $50 or less from their website

this is a silly "review" and an even sillier analysis.
It completely ignores the fact that all your data is on the device and if you ever have to replace it its a huge pain to back it up and restore it.
It also completely ignores how fragile the device is without a case on it.
It ignores the problem of fumbling around trying to find the correct way to insert the usb cable into the microusb slot (and if you insert the wrong way the tab can snap off) in the dark and trying to mount it on a car charger when you want to just get in the car and drive. it ignores the fact that wires running everywhere make a mess.
I have an iblason armorbox case and the samsung wireless back. Case fits perfectly, when i want to charge i just throw it on the charger. phone doesnt get below 90% throughout the day. I have an ebay 6000mah wireless charger in my bag, a wireless pad in my bedroom in a box and a wireless car charger. When i get home i literally throw the phone into the box and its charging instantly. i put the phone on my car cradle and it charges instantly. I put the phone with a rubberband in my bag attached to the wireless charger and it keeps charging while in my bag. no wires required. once a week i connect the usb cable from the 6000mah portable charger to a computer and leave it. overnight it gets topped up and ready to use for the next week. ive dropped the phone twice already (bumped it off a table and it fell from a placement on top of the car to concrete) with no issues. i dont have any silly insurance and the phone is zero hassle. i can use it in the rain, snow, dust, mud etc without worrying. the phone is always at 100% (never gets below 90%) and i dont need to worry about running out of battery.

zurkx said:
this is a silly "review" and an even sillier analysis.
It completely ignores the fact that all your data is on the device and if you ever have to replace it its a huge pain to back it up and restore it.
It also completely ignores how fragile the device is without a case on it.
It ignores the problem of fumbling around trying to find the correct way to insert the usb cable into the microusb slot (and if you insert the wrong way the tab can snap off) in the dark and trying to mount it on a car charger when you want to just get in the car and drive. it ignores the fact that wires running everywhere make a mess.
I have an iblason armorbox case and the samsung wireless back. Case fits perfectly, when i want to charge i just throw it on the charger. phone doesnt get below 90% throughout the day. I have an ebay 6000mah wireless charger in my bag, a wireless pad in my bedroom in a box and a wireless car charger. When i get home i literally throw the phone into the box and its charging instantly. i put the phone on my car cradle and it charges instantly. I put the phone with a rubberband in my bag attached to the wireless charger and it keeps charging while in my bag. no wires required. once a week i connect the usb cable from the 6000mah portable charger to a computer and leave it. overnight it gets topped up and ready to use for the next week. ive dropped the phone twice already (bumped it off a table and it fell from a placement on top of the car to concrete) with no issues. i dont have any silly insurance and the phone is zero hassle. i can use it in the rain, snow, dust, mud etc without worrying. the phone is always at 100% (never gets below 90%) and i dont need to worry about running out of battery.
Click to expand...
Click to collapse
Thank you for your opinion. I will keep mine.
I backup on a regular basis and restoring is easy.
I agree the device is fragile without a case.
I don't want the armorbox or otterbox or any other case that significantly increases the dimensions and bulk of the handset.
I don't charge in the car because I have short drive times.
I don't care for having to box or bag my phone throughout the day.
My job is not at a desk so I can't let the phone sit on a charging pad while at work.
I didn't want to spend hundreds of dollars on three or four wireless chargers to be distributed throughout my daily locations.
Wireless charging isn't mainstream enough yet to go completely wireless across all devices within reasonable costs. Other devices still require the cord mess. I am an "all in" or nothing sort of person.
The main reason for keeping the insurance is replacement in case of theft. Any new electronics are theft targets. I have had 2 phones stolen in the past. In one instance, I located the thief, removed a few teeth and repossessed my phone. The other went offline as soon as it was stolen and was untraceable. The insurance saved me from buying a new $600 handset out of cash.
Regardless of either of our subjective opinions, I mainly wrote the review to post the facts and figures of physical size and power output limitations. I will wait for resonant charging technology to be released and re-evaluate the cost benefit at that time. My analysis and opinions are there simply to get people to think about the pros and cons.

Wireless charging is way overrated imo. It charges much slower and you still need to have a cord for the charger itself (obviously). It literally takes almost the same amount of time to plug in the USB cord as it does to find the sweet spot of a wireless charger. At this point it's simply a novelty imo. Nothing more.

Each to their own. Any good 3 coil charge base has an enormous sweet spot, so hunting for position is not an issue at all.
If you get calls at night a lot (for work or other), the wireless charging is a god send. Trying to plug it in multiple times in the dark is ridiculous.
Now, when we have reversible connectors, my opinion might change.

JasonJoel said:
Each to their own. Any good 3 coil charge base has an enormous sweet spot, so hunting for position is not an issue at all.
If you get calls at night a lot (for work or other), the wireless charging is a god send. Trying to plug it in multiple times in the dark is ridiculous.
Now, when we have reversible connectors, my opinion might change.
Click to expand...
Click to collapse
I hear you man, I'm not saying it's totally worthless, but it's a very niche product imo. Like you have pointed out, it serves its purpose for some people. But I think for the average Joe, plugging in is just fine.
I do see where you are coming from however.

I have been reading about wireless charging for a couple years and never really pursued it on my Note 2 because I was with Verizon and they naturally removed it as they typically screw up phones somehow. I saw so many people that loved it and would go to great lengths to enable it. I decided after switching to T Mobile a couple weeks ago that I would give it a shot. I bought the OEM back and a cheap qi charger off of eBay and was disappointed with having to adjust my phone on the charger to hit the sweet spot. I decided to buy a Tylt charger and wow what a difference! I can literally place the phone on the charger in my case with no concern of finding a sweet spot because the whole charger is the sweet spot. It even works great through my wifes thick leather case. I love it and I find the rate of charge to be at least equal to a standard charger ( not fast charge) and that's great. I watched some netflix last night with my phone on the tylt (45 degrees)and it actually charged while streaming. I haven't personally plugged a phone in for more than 2 years since I just swap batteries out of my Samsung spare battery charger but now when I'm working or surfing at night my phone is always charging wirelessly and I never wake up with a phone that's less than 100%.

Even though it subjectively feels like wireless is as fast as a standard wall charger, it is not possible.
Manufacturers specification for wireless chargering is universally 800mA, or 0.8A.
Check my math in the first post. At 4W wireless chargers are less than half the speed of of a standard 10W wall charger.
Sent from my SAMSUNG-SM-N910A using XDA Free mobile app

Hey guys, so I'm looking for a case that fits the added bulk of the OEM QI back. Any recommendations? I'm looking at the i-blason case but open to any other suggestions.
Thanks

syngiun said:
The cost of "physical" insurance by way of wireless charging and a rubber bumper case is well over $200 all at the time of equipment purchase.
In my opinion, this high cost and slow speed of wireless charging is not sensible. I will be returning the equipment and returning to corded charging and my favorite case. I will keep the contractual insurance thought At&t. This risk vs cost analysis with corded charging is acceptable to me.
Click to expand...
Click to collapse
"well over $200"? The qi charging back is $40. I got a 3 pack of Qi chargers for $60 (nokia, they come in a bunch of colors) so I could have one by my bed, desk at home, and desk at work. Numerous others are available for $10-$25 on ebay and other retailers. I'll happily pay $100 (qi back + 3 docks) or so to never touch the USB cable, fumble with a cable end in the dark, or try the cable backwards. When charging is easy you don't care about charging speed as much. 0.5 seconds to dock or undock (without even looking) will spoil you.
While I have multiple devices, I end up keeping my devices for 3-4 years with secondary uses. So even if I do get something new within 2 years I don't want the secondary device to die just becuase of a horribly designed charging cable that makes my first nokia dumb phone from the 90s look awesome. Imagine that after almost 20 years of USB might someday actually be reversible, maybe in 2015.
Never understood why the audio jack on today's phones is robust, easy to use, and impossible to get backwards. You could use it 10 times a day for a decade, yet most rarely use it. Nokia used to use a similar connector for charging, I could manage to plug it in with my eyes closed an one hand behind my back. To charge a phone daily you end up with a tiny fragile usb connectors that's easy to get backwards and difficult to get in correctly on the first try without careful examination. Already lost one phone to usb, I'm trying to avoid losing a second.
Both the microusb connector and expoxied in batteries reak of planned obsolence to me. Thankfully the note 4 can minimize both problems.
Oh, one last thing. The Qi Chargers do lose some efficiency. So if you get a charger that's USB powered you end up with a poor charging speeds. So I'd get one of the ones that come with their own wall wart. I use the nokia DT-900 (which comes with it's own wall wart) with my nexus 5 and it charges pretty quickly.

el_chiefo said:
Hey guys, so I'm looking for a case that fits the added bulk of the OEM QI back. Any recommendations? I'm looking at the i-blason case but open to any other suggestions.
Thanks
Click to expand...
Click to collapse
I purchased the Caseology Carbon Fiber case to see if I'd have any luck with the OEM charging back....and it worked! I posted pictures here: http://forum.xda-developers.com/showthread.php?p=57275699#post57275699
Product here:
http://www.amazon.com/Caseology-Samsung-Absorbent-T-mobile-Unlocked/dp/B00N4DIM0A

I have the wireless charging S view cover in combination with the S5 charging dock. I agree with what you are saying. The charging is really slow. Especially for such a high capacity battery used in the Note 4. I would not buy this setup again.

Does the qi back protect the camera?

Yes the qi back protects the camera lens in terms of keeping the lens from scratching on surfaces when you set the phone down. The added thickness casues the back cover to extend just past the lens.
Sent from my SAMSUNG-SM-N910A using XDA Free mobile app

syngiun said:
Yes the qi back protects the camera lens in terms of keeping the lens from scratching on surfaces when you set the phone down. The added thickness casues the back cover to extend just past the lens.
Sent from my SAMSUNG-SM-N910A using XDA Free mobile app
Click to expand...
Click to collapse
Actually, Ive found that it does not extend past the camera lens, it makes the camera lens functionally flush with the back. Im a little disappointed in this and sort of wish it was "slightly" thicker. If it was, i think i would end up going caseless. I may end up doing what the OP described and going with the regular plugin. The batter last so long, i dont really plug it in except right before bed, and even then, i dont even need to charge it overnight anymore....

Choetech Qi Wireless Charger under $20 - Review

I've been looking out for a Wireless Charger since the Samsung Charging Pad gave up on my S6 Edge+ on the first day itself. I did get it replaced, however, the second one didn't work either. I know there are some good wireless chargers out there, but frankly, the ones I liked were quite pricey. Its just that, I didn't want to spend more than $20 on something I might never use and not to mention, I just spent like $900 on my new phone.
I came across this CHOETECH Circle Wireless Charger which looked really good. Having seen the reviews of other CHOETECH products, I expected a descent quality out of the brand and the price tag looked just perfect for what I was looking for. So, without further thinking, I just ordered one. I've been using it for a week now and I don't have any regrets at all.
Like most of the product brands, CHOETECH also reached out to me asking about my experience with the product and if I'm willing to write a review on it. Hell yeah, I'm always ready for a review and since I'm writing one, why not on XDA. So here's how it goes:-
I have set a standard for reviewing any product on following categories:-
1. Packaging & Content
2. Build Quality & Design
3. Functionality
4. Pros & Cons
I'll go through each of them one by one.
Packaging & Content
From a user's perspective, this might not be the best category for reviewing, however, a consumer's first impression comes with the packaging of the product. It is definitely one of the reasons for so many unboxing videos that we see on YouTube. Now, the one about this product which didn't really impress me is its packaging. It comes in a sleek soft box as shown below:-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
As you can see, the box doesn't really give an impression of a top notch brand as it doesn't even mention the exact name of the product which is CHOE Circle Qi Wireless Charger [highlighted above]. It also lacks any kind of seal [highlighted above] or mentioning some of the unique features of this product that I read online while ordering. May be I'm expecting too much of a $20 product, but that's just me. This may not even bother most of you.
Looking through the contents of the box, we have the following items:-
- Wireless Charging Pad
- USB Cable
- Instruction Manual
- Service Manual
So, you did notice that we don't have a charging adapter coming up with this one. May be that's why the charger is priced at just $20. I don't really care for this (since I've plenty of spare chargers) but, for some, it might be a deal breaker because if they want to use it at their office and the original fast charger at home, they might have to buy a spare charger (with atleast 2 Amp output).
Moving on to the next category...
Build Quality & Design
With an Alumnium back, this product is definitely one of the best out there at this price range. Not just the top, the bottom also has a thick rubber ring to hold onto its ground, no matter where you place it. It has the perfect grip to keep the smartphone in place even without a case on S6 Edge+ and Note 5, which are extremely slippery due to their glass back. The top surface is shiny plastic to provide wireless charging capability. Although it is slightly smaller than Samsung Wireless Charger, the size is just right for any smartphone or smartwatch (Moto 360).
Overall, it might not give you the best premium feel that you would get with brands like Samsung or Google (Nexus), but it is definitely made out of a good quality material and gives feeling of a quality product.
Functionality
Where the Samsung Wireless Charging pad failed to charge my S6 Edge+, this one didn't dissapoint me at all. Just like the former, the CHOETECH Wireless Charger is QI based and it also has an illuminating Blue LED around it which starts glowing once the phone has been placed over it and the charging starts. The blue LED also notifies you when it is unable to charge wirelessly when you place a phone (without wireless charging capability) on top of it. I love the blue illumination since it tells me that my phone is charging alright, but with the Samsung Pad, it used to bother me at night with the illumination being too bright. Thanks to CHOETECH's Smart Light Sensor, this charger dims or completely turns off the bright blue LED depending on the nearby ambient light. That means, if I turn off the light at night, the blue LED around it turns off automatically, but the charging continues.
Another feature that I noticed on this is, even if the phone reaches 100% battery, the charger doesn't turn off (like Samsung's did) and when you get up in the morning, you get your device with 100% Charge. This might be a good thing for some, because I've seen people complaining over it on Samsung Wireless Pad's review that it turns off automatically and the phone charge goes down by the time they get up in the morning. Anyway, this is definitely a matter of personal choice, and I would have preferred an auto-off system against this one.
The charger specification mentions input as 5V/2A, so any modern day charging adapter would do just fine with this wireless pad. The output mentioned is 5V/1A which is same as any other wireless charger available in the market. With this specification, a 3000 mAh battery should charge within 3 hours. So, does it really stand upto it's bold claim? Let's find out...
So, I used a USB power meter to see how much current is drawn when a Nexus 4 and S6 Edge+ is charging. Its hard to tell if the shown current is being drawn by the wireless charger for itself or is it the rate at which, the phone is charging. If I have to take a guess, I would say it's the current that the charger is drawing for itself in order to generate the wireless charging through it's induction coil. Here's a comparison between the Nexus 4 and Edge:-
I also noted down the S6 Edge+ charge time at specific intervals while charging it from 6% - 100%. You can see a constant charging rate from 6%-80% in the graph. And then it takes a little more time from that point to 100%
From the readings above, one can tell that the average time from 0%-100% would be around 3 hours for a 3000 mAh battery (S6 Edge+), which is exactly the time a charger would require if it's output is 1 Amp. And this is where I felt I've made the right choice. A 3 hour charge time for wireless charging is definitely a good sign and I'm 100% satisified with this product. I also ran some tests using different cases for my Edge+ (2 SPG and 1 Arozel) and it didn't make any difference at all. The charger was able to charge my phone through all the cases, which again is a good sign as I read in many of the Wireless Pad's reviews that they don't charge when a case is used.
Pros & Cons
Here's a list of pros and cons for Choetech QI Wireless Charger :-
Pros
- Solid Build Quality
- Small in Size
- Top & Bottom Grips
- Good Power output
- Smart Light Sensor
- No Beep Sound on charge completion
Cons
- Poor Boxing (No Seal on Box either)
- No Charging Adapter
- Doesn't turn-off after 100% charging
So, overall, I'm extremely satisfied with this product. If you're looking for a cheap wireless charger that looks good and gets the job done, this one is definitely for you. However, if your budget isn't limited, you can always opt for a wireless charger from brands like Samsung or Google (Nexus).
Here's a quick video review of the same: CHOE TECH Circle Qi Wireless Charger - Quick Review

The best review i've even seen, good job!

I was going to order this wireless charger but didn't because I don't know if it will charge my phone thru the case. I have the i-blason here http://www.amazon.com/gp/aw/d/B013D...+plus+case&dpPl=1&dpID=519HbBaRRuL&ref=plSrch. Wonder if it will work I know the Samsung one will not charge my phone with this case on my phone.

richierich118 said:
I was going to order this wireless charger but didn't because I don't know if it will charge my phone thru the case. I have the i-blason here http://www.amazon.com/gp/aw/d/B013D...+plus+case&dpPl=1&dpID=519HbBaRRuL&ref=plSrch. Wonder if it will work I know the Samsung one will not charge my phone with this case on my phone.
Click to expand...
Click to collapse
It looks really thick, i doubt it could be charged wirelessly with case on.

richierich118 said:
I was going to order this wireless charger but didn't because I don't know if it will charge my phone thru the case. I have the i-blason here http://www.amazon.com/gp/aw/d/B013D...+plus+case&dpPl=1&dpID=519HbBaRRuL&ref=plSrch. Wonder if it will work I know the Samsung one will not charge my phone with this case on my phone.
Click to expand...
Click to collapse
I've tried it with only a couple of cases I had and it worked fine with each of them. But since you're mentioning that even the Samsung's Charger didn't work with your case, even I would doubt it now. Best would be to just order one and see for yourself. You can always return if it doesn't work for you..

Is not a really thick case about 3/4 thinner then a otter box case with the same protection. Funny is how I have the same style case on my s5 and it will charge with the same wireless charger thru the case.

richierich118 said:
Is not a really thick case about 3/4 thinner then a otter box case with the same protection. Funny is how I have the same style case on my s5 and it will charge with the same wireless charger thru the case.
Click to expand...
Click to collapse
Have you tried it with case on Samsung's new fast charge wireless charger?

I don't think the Samsung Fast Charger is out yet.. Its still on ore-order status on Samsung official website and B&H
Sent from my SAMSUNG-SM-G928A using XDA Free mobile app

apurva.giri said:
I don't think the Samsung Fast Charger is out yet.. Its still on ore-order status on Samsung official website and B&H
Sent from my SAMSUNG-SM-G928A using XDA Free mobile app
Click to expand...
Click to collapse
It's already listed on Amazon, here is the link:
http://www.amazon.com/Samsung-Fast-Charge-Wireless-Charging/dp/B012AWBN9C/
And i heard fast wireless charger is in package when you buy Note 5 or S6 Edge+ in UK.

feihu989 said:
It's already listed on Amazon, here is the link:
http://www.amazon.com/Samsung-Fast-Charge-Wireless-Charging/dp/B012AWBN9C/
Click to expand...
Click to collapse
Thanks for the info... :good:
feihu989 said:
And i heard fast wireless charger is in package when you buy Note 5 or S6 Edge+ in UK.
Click to expand...
Click to collapse
I heard that too... Too bad for us US Customers! Even the one, that some of the stores offered free, isn't working with Edge+.

nice find. i hate that the charger i got with mine doesn't even work. i know it isnt the charger itself because my s6 will charge fine on it. what screen protector do you have op?

sand1303 said:
nice find. i hate that the charger i got with mine doesn't even work. i know it isnt the charger itself because my s6 will charge fine on it. what screen protector do you have op?
Click to expand...
Click to collapse
I use Zagg. But I would suggest buying ArmorSuit or Skinomi. Zagg is just too costly! See another thread I hv started where ArmorSuit is available for $0.45. Nothing can go wrong with that price tag. Not sure though if the offer is still available though!

Here are some tests I read of both the Choetech Circle and the Samsung wireless charging pad from Talkandroid. All tests were done during a timed 30 minutes of charging with a few days in between and after various restarts of the Galaxy S6 Edge.
Choetech
30% -> 41% (with case) (11% increase)
30% -> 43% (with case) (13% increase)
75% -> 91% (without case) (16% increase)
05% -> 23% (without case) (18% increase)
Samsung
24% -> 43% (with case) (19% increase)
74% -> 90% (with case) (16% increase)
08% -> 21% (without case) (13% increase)
11% -> 31% (without case) (20% increase)

st8chic said:
Here are some tests I read of both the Choetech Circle and the Samsung wireless charging pad from Talkandroid. All tests were done during a timed 30 minutes of charging with a few days in between and after various restarts of the Galaxy S6 Edge.
Choetech
30% -> 41% (with case) (11% increase)
30% -> 43% (with case) (13% increase)
75% -> 91% (without case) (16% increase)
05% -> 23% (without case) (18% increase)
Samsung
24% -> 43% (with case) (19% increase)
74% -> 90% (with case) (16% increase)
08% -> 21% (without case) (13% increase)
11% -> 31% (without case) (20% increase)
Click to expand...
Click to collapse
Charging result won't be consistent ever unless we do it from top to bottom.. (0-100) and see the final time. Every device charges at its own different rate depending on various factors. Besides, the battery meter would never be precise. That goes for my review too.
But one thing is certain from your tests. A case do affect the charge time with a wireless charger. Thanks for sharing the result!

apurva.giri said:
Charging result won't be consistent ever unless we do it from top to bottom.. (0-100) and see the final time. Every device charges at its own different rate depending on various factors. Besides, the battery meter would never be precise. That goes for my review too.
But one thing is certain from your tests. A case do affect the charge time with a wireless charger. Thanks for sharing the result!
Click to expand...
Click to collapse
Fast charge wireless charger will charge your phone much quicker than normal wireless charger, 10w output is almost as fast as wired charging, full charge in 2 hours.

feihu989 said:
Fast charge wireless charger will charge your phone much quicker than normal wireless charger, 10w output is almost as fast as wired charging.
Click to expand...
Click to collapse
I know that. But st8chic was talking about the usual Samsung Wireless Charging pad, not the fast one!

is this fast charge or does it charge at 2.1 amp?

No. This is not Fast Charger.
Sent from my SAMSUNG-SM-G928A using XDA Free mobile app

apurva.giri said:
I've been looking out for a Wireless Charger since the Samsung Charging Pad gave up on my S6 Edge+ on the first day itself. I did get it replaced, however, the second one didn't work either. I know there are some good wireless chargers out there, but frankly, the ones I liked were quite pricey. Its just that, I didn't want to spend more than $20 on something I might never use and not to mention, I just spent like $900 on my new phone.
I came across this CHOETECH Circle Wireless Charger which looked really good. Having seen the reviews of other CHOETECH products, I expected a descent quality out of the brand and the price tag looked just perfect for what I was looking for. So, without further thinking, I just ordered one. I've been using it for a week now and I don't have any regrets at all.
Like most of the product brands, CHOETECH also reached out to me asking about my experience with the product and if I'm willing to write a review on it. Hell yeah, I'm always ready for a review and since I'm writing one, why not on XDA. So here's how it goes:-
I have set a standard for reviewing any product on following categories:-
1. Packaging & Content
2. Build Quality & Design
3. Functionality
4. Pros & Cons
I'll go through each of them one by one.
Packaging & Content
From a user's perspective, this might not be the best category for reviewing, however, a consumer's first impression comes with the packaging of the product. It is definitely one of the reasons for so many unboxing videos that we see on YouTube. Now, the one about this product which didn't really impress me is its packaging. It comes in a sleek soft box as shown below:-
As you can see, the box doesn't really give an impression of a top notch brand as it doesn't even mention the exact name of the product which is CHOE Circle Qi Wireless Charger [highlighted above]. It also lacks any kind of seal [highlighted above] or mentioning some of the unique features of this product that I read online while ordering. May be I'm expecting too much of a $20 product, but that's just me. This may not even bother most of you.
Looking through the contents of the box, we have the following items:-
- Wireless Charging Pad
- USB Cable
- Instruction Manual
- Service Manual
So, you did notice that we don't have a charging adapter coming up with this one. May be that's why the charger is priced at just $20. I don't really care for this (since I've plenty of spare chargers) but, for some, it might be a deal breaker because if they want to use it at their office and the original fast charger at home, they might have to buy a spare charger (with atleast 2 Amp output).
Moving on to the next category...
Build Quality & Design
With an Alumnium back, this product is definitely one of the best out there at this price range. Not just the top, the bottom also has a thick rubber ring to hold onto its ground, no matter where you place it. It has the perfect grip to keep the smartphone in place even without a case on S6 Edge+ and Note 5, which are extremely slippery due to their glass back. The top surface is shiny plastic to provide wireless charging capability. Although it is slightly smaller than Samsung Wireless Charger, the size is just right for any smartphone or smartwatch (Moto 360).
Overall, it might not give you the best premium feel that you would get with brands like Samsung or Google (Nexus), but it is definitely made out of a good quality material and gives feeling of a quality product.
Functionality
Where the Samsung Wireless Charging pad failed to charge my S6 Edge+, this one didn't dissapoint me at all. Just like the former, the CHOETECH Wireless Charger is QI based and it also has an illuminating Blue LED around it which starts glowing once the phone has been placed over it and the charging starts. The blue LED also notifies you when it is unable to charge wirelessly when you place a phone (without wireless charging capability) on top of it. I love the blue illumination since it tells me that my phone is charging alright, but with the Samsung Pad, it used to bother me at night with the illumination being too bright. Thanks to CHOETECH's Smart Light Sensor, this charger dims or completely turns off the bright blue LED depending on the nearby ambient light. That means, if I turn off the light at night, the blue LED around it turns off automatically, but the charging continues.
Another feature that I noticed on this is, even if the phone reaches 100% battery, the charger doesn't turn off (like Samsung's did) and when you get up in the morning, you get your device with 100% Charge. This might be a good thing for some, because I've seen people complaining over it on Samsung Wireless Pad's review that it turns off automatically and the phone charge goes down by the time they get up in the morning. Anyway, this is definitely a matter of personal choice, and I would have preferred an auto-off system against this one.
The charger specification mentions input as 5V/2A, so any modern day charging adapter would do just fine with this wireless pad. The output mentioned is 5V/1A which is same as any other wireless charger available in the market. With this specification, a 3000 mAh battery should charge within 3 hours. So, does it really stand upto it's bold claim? Let's find out...
So, I used a USB power meter to see how much current is drawn when a Nexus 4 and S6 Edge+ is charging. Its hard to tell if the shown current is being drawn by the wireless charger for itself or is it the rate at which, the phone is charging. If I have to take a guess, I would say it's the current that the charger is drawing for itself in order to generate the wireless charging through it's induction coil. Here's a comparison between the Nexus 4 and Edge:-
I also noted down the S6 Edge+ charge time at specific intervals while charging it from 6% - 100%. You can see a constant charging rate from 6%-80% in the graph. And then it takes a little more time from that point to 100%
From the readings above, one can tell that the average time from 0%-100% would be around 3 hours for a 3000 mAh battery (S6 Edge+), which is exactly the time a charger would require if it's output is 1 Amp. And this is where I felt I've made the right choice. A 3 hour charge time for wireless charging is definitely a good sign and I'm 100% satisified with this product. I also ran some tests using different cases for my Edge+ (2 SPG and 1 Arozel) and it didn't make any difference at all. The charger was able to charge my phone through all the cases, which again is a good sign as I read in many of the Wireless Pad's reviews that they don't charge when a case is used.
Pros & Cons
Here's a list of pros and cons for Choetech QI Wireless Charger :-
Pros
- Solid Build Quality
- Small in Size
- Top & Bottom Grips
- Good Power output
- Smart Light Sensor
- No Beep Sound on charge completion
Cons
- Poor Boxing (No Seal on Box either)
- No Charging Adapter
- Doesn't turn-off after 100% charging
So, overall, I'm extremely satisfied with this product. If you're looking for a cheap wireless charger that looks good and gets the job done, this one is definitely for you. However, if your budget isn't limited, you can always opt for a wireless charger from brands like Samsung or Google (Nexus).
Here's a quick video review of the same: CHOE TECH Circle Qi Wireless Charger - Quick Review
Click to expand...
Click to collapse
I ordered this product few days back. I really like some of its features which include micro USB port, Smart Light Sensor and rubber grip on the bottom. This product is one of the best at this price range. It would be better if they have added charger adapter. I am happy with this product and its one of the best in same price range.

The T-Mobile variant came with the Fast Charging adapter. Haven't used it yet, was gonna get a car charger/spare charger so i can carry it in my bag.

Another wireless charging (Qi) thread

Wondering if anyone has used the ZENS chargers. I'm looking at this one for the V30: https://www.amazon.com/gp/product/B079NWG6L7
It appears to support 15W Qi charging but it's been a while since I've bought any wireless chargers and there still isn't much information out there (or great selection of chargers). I'm worried companies are using proprietary technology (like G-Sync from NVIDIA) to lock out other phone vendors from taking advantage of something. The concern is if the charger would work with LG phones, considering it's explicitly calling out Samsung and iPhone charging. It could be that they're doing this because of market share/popularity of the devices, but I don't know that.
The image on Amazon does say "Other" and show support for "5-15W certified" as being "faster, peak charging" but you know how these images on Amazon are.. and how things sometimes tend to be picky regardless...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Manufacturer's page: https://www.makezens.com/shop/zens-single-ultra-fast-wireless-charger-optimized-for-apple-iphone/
Otherwise, does anyone know of a charger that supports fast Qi charging and will automatically shut off when the battery is full (instead of cycling on and off every second like my Panasonic QE-TM101-K), supports fastest possible Qi charging on the V30 and isn't finicky about where you place the phone?
I was checking out the Belkin F7U014dqSLV but it appears to have many complaints about being finicky about phone placement. I don't like these chargers that require the phone to be placed precisely.... it almost entirely defeats the purpose of using a wireless charger.
Also, wow... not only should phone companies start adding battery limitation settings straight into the phone's OS but these chargers should have the option to define a maximum charge % too.
I want one specifically that is a pad rather than something that props the phone up (stand).
What are your experiences and recommendations for 15W Qi chargers?

Umidigi Q1. Umidigi is actually a phone company itself and like LG got carried away with Qualcomm's lousy fast wireless charging claims - so they had to make their own fast wireless charger; which happens to be the Umidigi Q1.
Fast charging speed with original V30 charger is very good. I have observed 30% increase in 30 minutes.
But you must find the correct spot on this small round device to start charging. From what I am experiencing so far, V30 must sit a little bit lower than the middle of the charger : then V30 reports it is fast wireless charging and also charges fast.

eyupo92 said:
Umidigi Q1. Umidigi is actually a phone company itself and like LG got carried away with Qualcomm's lousy fast wireless charging claims - so they had to make their own fast wireless charger; which happens to be the Umidigi Q1.
Fast charging speed with original V30 charger is very good. I have observed 30% increase in 30 minutes.
But you must find the correct spot on this small round device to start charging. From what I am experiencing so far, V30 must sit a little bit lower than the middle of the charger : then V30 reports it is fast wireless charging and also charges fast.
Click to expand...
Click to collapse
I didn't know there was a reply to this... anyways I placed my order on December 31st for the ZENS and I can report that it works well and is worth the price. It isn't cheap stuff at all. The power adapter for the wall comes with 3 swappable prongs for regional sockets and even the twist tie on the cable isn't cheap plastic garbage like many cheap products are. While the brand is relatively unknown, they seem to actually be making pretty premium products. The charger successfully Fast Charges the V30+ via Qi and even works through the Spigen Tough Armor case.
Regarding the original charger, my phone didn't come with one and I intend on using wireless charging partially because I want to avoid plugging a USB cable into the phone as much as possible to prolong the life of the port.

s0lidsneak said:
I didn't know there was a reply to this... anyways I placed my order on December 31st for the ZENS and I can report that it works well and is worth the price. It isn't cheap stuff at all. The power adapter for the wall comes with 3 swappable prongs for regional sockets and even the twist tie on the cable isn't cheap plastic garbage like many cheap products are. While the brand is relatively unknown, they seem to actually be making pretty premium products. The charger successfully Fast Charges the V30+ via Qi and even works through the Spigen Tough Armor case.
Regarding the original charger, my phone didn't come with one and I intend on using wireless charging partially because I want to avoid plugging a USB cable into the phone as much as possible to prolong the life of the port.
Click to expand...
Click to collapse
I picked up one of these ZENS chargers yesterday from Amazon for my B&H US998 V30S. I had the opposite experience from s0lidsneak. I put the phone on the charger before I went to bed. I got the "fast wireless charging" message and another one stating that full charge would be achieved in 1 hr 5m. About 6 hours later, it had only gone from 53% to 73%. The phone was VERY warm, and the charger itself was almost too hot to touch. I had it in the upright position, the entire reason I bought this charger.
I'll try it again tonight, but if I can't get better charging speed out of this without it warming up the phone so much, it's going back. Any thoughts on what I might have done wrong or why it's doing this would be appreciated.
Dave

Dataman100 said:
I picked up one of these ZENS chargers yesterday from Amazon for my B&H US998 V30S. I had the opposite experience from s0lidsneak. I put the phone on the charger before I went to bed. I got the "fast wireless charging" message and another one stating that full charge would be achieved in 1 hr 5m. About 6 hours later, it had only gone from 53% to 73%. The phone was VERY warm, and the charger itself was almost too hot to touch. I had it in the upright position, the entire reason I bought this charger.
I'll try it again tonight, but if I can't get better charging speed out of this without it warming up the phone so much, it's going back. Any thoughts on what I might have done wrong or why it's doing this would be appreciated.
Dave
Click to expand...
Click to collapse
There's no upright position on the charger I linked but they do make one like that. The phone can get pretty hot if I use the Battery Limit app and put it on that charger but for normal charges it seems to only get moderately warm, which is to be expected when charging a battery and since 2013 when I used wireless charging I noticed it gets a little warmer than a regular cable charge too. Haven't had any extreme overheats like you have using the model I linked but have no experience with whichever one you bought.
I'm new to any kind of "fast charging" as the only other wirelessly charged phone I've had was a Nexus 5 but I think it's normal for it to get a little warmer than a slow charge. As far as how long it's taking you to charge, that's very strange and I have more of a feeling that's a battery/battery calibration issue or maybe the phone is having trouble staying connected to the charger, in which case I'd blame the charger for not having appropriately positioned coils to be suitable for all phones. It's hard to say when I am unable to put the same phone up to the same charger and see for myself.

s0lidsneak said:
There's no upright position on the charger I linked but they do make one like that. The phone can get pretty hot if I use the Battery Limit app and put it on that charger but for normal charges it seems to only get moderately warm, which is to be expected when charging a battery and since 2013 when I used wireless charging I noticed it gets a little warmer than a regular cable charge too. Haven't had any extreme overheats like you have using the model I linked but have no experience with whichever one you bought.
I'm new to any kind of "fast charging" as the only other wirelessly charged phone I've had was a Nexus 5 but I think it's normal for it to get a little warmer than a slow charge. As far as how long it's taking you to charge, that's very strange and I have more of a feeling that's a battery/battery calibration issue or maybe the phone is having trouble staying connected to the charger, in which case I'd blame the charger for not having appropriately positioned coils to be suitable for all phones. It's hard to say when I am unable to put the same phone up to the same charger and see for myself.
Click to expand...
Click to collapse
Oops, you're correct. I purchased the other model, ZESC07BA, which does have an upright mode. I want to be able to see the phone from bed. The V30S is my first Qi capable phone so I'm new to this as well.
I have no idea why it looks like it's fast charging, but took so long to show any increase. It never made it to 100% before I had to get up. Plus, it's roasting the phone. I expected some heat, but the charger was almost too hot to touch. I may just go back to wired charging. My phone wasn't even warm, (at least not through the case), when I wired charged it. Plan on keeping this a while so I don't want to limit it's lifespan by overheating it.
In reading some of the Amazon reviews, other's have said that it gets pretty hot as well. I'll give it one more shot, but if it can't charge the phone in one night, it's going back.

Dataman100 said:
Oops, you're correct. I purchased the other model, ZESC07BA, which does have an upright mode. I want to be able to see the phone from bed. The V30S is my first Qi capable phone so I'm new to this as well.
I have no idea why it looks like it's fast charging, but took so long to show any increase. It never made it to 100% before I had to get up. Plus, it's roasting the phone. I expected some heat, but the charger was almost too hot to touch. I may just go back to wired charging. My phone wasn't even warm, (at least not through the case), when I wired charged it. Plan on keeping this a while so I don't want to limit it's lifespan by overheating it.
In reading some of the Amazon reviews, other's have said that it gets pretty hot as well. I'll give it one more shot, but if it can't charge the phone in one night, it's going back.
Click to expand...
Click to collapse
Maybe you should email the company. Their responses aren't very fast (a few days) but they do answer. Maybe you have a defective unit?
I just tested the charger I bought with the V30+ from 53% to 73%:
The ambient temp before charge was 19 C and battery temp was 27 C.
The ambient temp after charge hasn't changed and the battery temp is 37.5 C.
It took 20 minutes to charge from 53% to 73%.
The charge limit is set to 81% (I knew it hit 73% by tapping to wake the screen).
The Spigen Tough Armor case was on the phone.
According to IMEI lookup, the phone was produced on October 14th, 2017.

I decided to return it because it isn't as simple to position the phone on it as I first thought. After spending more time with the charger I think it's too much of a hassle trying to position it. I think I may have just gotten lucky on the first attempts the night I got it.
The rest of the points are still valid. It's well-made as far as build quality and charges quickly. I just dislike how difficult it is to place the phone.
Additionally, my monitor just died on me and I need to save up to replace it. I'll go for another charger later and will probably pick up this before a Qi charger I can decide on comes along.

I ve just bought this Huawei cp60 (15w) without charger itself.. I ll test it and let u guys know the result..
https://www.aliexpress.com/item/Hua...801.html?spm=a2g0s.9042311.0.0.765a4c4d3s5ccs

My wife was having trouble lining up her phone correctly when placing it on her wireless charger. So decided to make a base or guide for her charging pad so her phone would line up correctly every time. First I made a prototype out of cardboard, then I 3D printed the final design. Works like a charm and she loves it!

wtang said:
My wife was having trouble lining up her phone correctly when placing it on her wireless charger. So decided to make a base or guide for her charging pad so her phone would line up correctly every time. First I made a prototype out of cardboard, then I 3D printed the final design. Works like a charm and she loves it!
Click to expand...
Click to collapse
Or use tilted charger so you can see notifications also. Can't mess it up.
https://www.amazon.com/Anker-Qi-Certified-Compatible-Fast-Charging-PowerWave/dp/B07DBXZZN3

wtang said:
My wife was having trouble lining up her phone correctly when placing it on her wireless charger. So decided to make a base or guide for her charging pad so her phone would line up correctly every time. First I made a prototype out of cardboard, then I 3D printed the final design. Works like a charm and she loves it!
Click to expand...
Click to collapse
:good: the Papa Johns had a certain rustic quality to it but good job with the 3D printing :good:
:laugh::laugh::laugh:
This why I only wanted a stand type one. I can just rest it on there, vertical or horizontal working on mine, and it just works. Also easy to read on the desk.

wtang said:
My wife was having trouble lining up her phone correctly when placing it on her wireless charger. So decided to make a base or guide for her charging pad so her phone would line up correctly every time. First I made a prototype out of cardboard, then I 3D printed the final design. Works like a charm and she loves it!
Click to expand...
Click to collapse
That's a cool idea.. I wish the chargers were just large to begin with though.
ChazzMatt said:
Or use tilted charger so you can see notifications also. Can't mess it up.
https://www.amazon.com/Anker-Qi-Certified-Compatible-Fast-Charging-PowerWave/dp/B07DBXZZN3
Click to expand...
Click to collapse
I was thinking of getting one of those next time.. a tilted one... Maybe just leave it at my PC and not worry about charging at bed since the battery is so much better than the Nexus 5.
Also about notifications.. would sure be a lot better if the screen could light up when receiving them. I don't understand why it doesn't... especially since the phone lacks a notification light.
I would also love to be able to see notifications with previews on that screen instead of requiring I use always on then seeing a little icon there indicating a notification exists.

The metal one by Anker is by far the fastest one. I have the white stand with cooling fan one too. But the metal one is definitely faster. I mean not a huge amount faster but it's definitely faster. Would explain the extra heat. I mean Anker didn't start advertising support for 15w phones until the the metal one.

TotallyAnxious said:
The metal one by Anker is by far the fastest one. I have the white stand with cooling fan one too. But the metal one is definitely faster. I mean not a huge amount faster but it's definitely faster. Would explain the extra heat. I mean Anker didn't start advertising support for 15w phones until the the metal one.
Click to expand...
Click to collapse
The White Stand didn't even work with the included charger for me. I just want something that doesn't take ten minutes to position my phone to charge it. Even the large anker pad is a pain in the ass.

TPMJB said:
The White Stand didn't even work with the included charger for me. I just want something that doesn't take ten minutes to position my phone to charge it. Even the large anker pad is a pain in the ass.
Click to expand...
Click to collapse
The metal one doesn't really have any positioning issues, I have positioning issues with the white one but it sounds like they aren't as bad as yours were.
From as far as I can tell the metal one will start charging as soon as it defects proper positioning. Like it won't say it isn't positioned properly with the led, it just charges when it defects the phone. The only time I got the pad to say it isn't positioned properly was after like 5-10 minutes of trying to see if it even did that. And I was actually holding the phone above the charger to fool it lol.
In regards to the metal pad , it runs cool when used atop a thermal pad I had laying around.
But I'm gonna stick to the white stand and use a magnetic micro USB cable to avoid strain on the port if it gets knocked over by one of my dogs. I can already tells it's loose.
And the metal pad seems to only run hot during the initial fast charging, like how it charges really fast and really hot with a cable, then slows down the charging the closer you get 100%. I've never had it feel hot to the touch when I wake up.
Maybe look into a car charger one? Some of them advertise as useful when taped to a desk or whatnot

Would the LG G3 wireless charger fit the LG V30 +?
Do you know if dual-chip version would also accept wireless charging? Thank you.

Cavallero said:
Would the LG G3 wireless charger fit the LG V30 +?
Do you know if dual-chip version would also accept wireless charging? Thank you.
Click to expand...
Click to collapse
All V30 variants have Qi wireless charging feature. Any Qi wireless charging pad will work. Some do charge faster than others, however.
The newer ones have more power. A Qi wireless charging pad for LG G3 would be from 2014. (I've used Qi wireless charging pad since 2013, but as the technology has improved I've ditched the older ones.) But yes, it would work.