Database Info

Please help!! Bricked my Rogers P925g!

I need some help to unbrick my Rogers branded O3D P925g. I was able to root it and manually install the camera mod from erosized. Then i tried manually installing the performance pack and when i rebooted its looping at the Rogers screen. Can i use the unbrick method from the p920? Thanks again.
Sent from my LG-P920 using XDA App

I had mine bricked as well and this method worked great for getting it back.
Step 1: Get the newest KDZ file for your phone/carrier. I got mine from here:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=xxxxxxx
Where xxxx is enter the IMEI of your phone which is found under the battery.
Step 2: follow the instructions here:
http://forum.xda-developers.com/showthread.php?t=1186406\
This will bring it back from pretty much any state. Mine was not even booting up to the LG Logo and this restored it.
Good Luck.

Just fixed mine. Use LG Update Tool, Click on Customer Support and then Recovery Phone. Enter your IMEI number and it will completely wipe the phone contents and install the newly released v20c BB and software. This process took me about 20 minutes and then an additional 10 min or so to boot into the OS. Worked flawlessly with my SIM and microSD still in the phone. Didn't loose any data from my microSD either. Got 4G back as well. Note that rooted state will be removed and CWM Recovery will be replaced with Android Recovery.

Same Problem no resolution
I have the same phone and when I use those links I cannot get anything to show up no matter how i enter the information.
My phone is stuck on the lg screen and it wont boot up. could someone give me a link to LG P925G stock firmware or some method of unbricking my phone. i have't had much luck.
all because I used Rom Manager too.
I cannot even go into recovery mode is my phone totaly bricked? I need some tips.

how to unbrick
largo79 said:
I need some help to unbrick my Rogers branded O3D P925g. I was able to root it and manually install the camera mod from erosized. Then i tried manually installing the performance pack and when i rebooted its looping at the Rogers screen. Can i use the unbrick method from the p920? Thanks again.
Sent from my LG-P920 using XDA App
Click to expand...
Click to collapse
here is the most easy and straight-forward way I discovered to unbrick or overcome any flashing error no matter what it is (it applies to lg o3d, and thrill 4G, I think it will apply to their fellows)
1-you must have drivers installed of-course
2-remove your battery
2-open your pc device manager and look at COM and PORT section
3-hold volume up button (only) and connect your mobile to pc through USB while pressing this button, and keep pressing until you see a new port has been added and installed in your COM and PORT section (about 15-20 sec), now you can release the button, be sure that port will stay apparent after releasing the button, or repeat this step (with longer press on volume up button)
4-put your battery back and don't touch your phone again
5-now start flashing by following these 2 tutorials in order:
a-http://forum.xda-developers.com/showthread.php?t=1473781
b-http://forum.xda-developers.com/showthread.php?t=1327929
after finishing reboot and enjoy

[Q] ICS flash help

hi guys noob here im having a hell of a time trying to flash ics on mt rocket. Can some one give me a run down on whats need to make this flash run. Im on a completely stock skyrocket, on a laptop running xp. do i need the skyrocket's drivers on my laptop to flash ics? i have downloaded I727UCALC4_OneClick and new drivers but the drivers wont load on to the laptop/cant be found. what am i doing wrong.

house909 said:
hi guys noob here im having a hell of a time trying to flash ics on mt rocket. Can some one give me a run down on whats need to make this flash run. Im on a completely stock skyrocket, on a laptop running xp. do i need the skyrocket's drivers on my laptop to flash ics? i have downloaded I727UCALC4_OneClick and new drivers but the drivers wont load on to the laptop/cant be found. what am i doing wrong.
Click to expand...
Click to collapse
I suggest you use the forum's "search" function and take a couple of days to do some reading and preperation. I'm telling you this because there is way to much information you need to know to just generically post here in this thread for you. You are admitedly a NOOB...and that's fine, everyone kinda is. I am thinking if you don't do a little reasearch you WILL end up with a bricked phone. I am on windows 7, but downloading the newest version of Kies from Samsung (onto your XP Laptop) should give you the drivers you need. But you may have to assign a USB port to the Drivers, may have to change USB ports, may need to use a different PC, might not have the right data cable...etc. The list goes on and on.
So search and read and read and read. Take small steps. Make sure your PC recognizes your phone and that ODIN works before you flash anything major. I'm sure you want to install ICS now and you are impatient, but if you don't take my advice your next post could very possibly be one of the 10,000 "Hey guys, I bricked my phone!" threads that keep being posted from people that didn't learn the lesson in advance.
Good luck.

Thanx for the heads up.
I have been reading and reading lol i read for like 8 hrs last nite and decided id give it a try but after idownloaded the drivers off of the samsung website and it wouldnt load i just stopped lol. Now im going to read somemore and give it another try. Thanx again for the advice

I am a noob (android) and I seem to be stuck when loading this. I found the below instructions and it seems to be stuck loading the system.img file. Not sure if I did something wrong or what but I am stuck.
what I heard you do..
Plug your usb into comp
pull battery out of phone
put battery back in
hold volume + and - and plug in usb to phone
click the exe file and your off

coldracerx said:
I am a noob (android) and I seem to be stuck when loading this. I found the below instructions and it seems to be stuck loading the system.img file. Not sure if I did something wrong or what but I am stuck.
what I heard you do..
Plug your usb into comp
pull battery out of phone
put battery back in
hold volume + and - and plug in usb to phone
click the exe file and your off
Click to expand...
Click to collapse
I would add in between your last two instructions: Make Sure Odin Recognizes Your Phone

Cool thanx.
Ill try it once i get home(damn LA traffic)

house909 said:
I have been reading and reading lol i read for like 8 hrs last nite and decided id give it a try but after idownloaded the drivers off of the samsung website and it wouldnt load i just stopped lol. Now im going to read somemore and give it another try. Thanx again for the advice
Click to expand...
Click to collapse
You want to install Kies.

maybe this guys video will help the noobs
http://www.youtube.com/watch?v=eTrdw8k14DU

Crazy...
You just made my day!!!

house909 said:
You just made my day!!!
Click to expand...
Click to collapse
Thank the guy that made it! hes a member here

Hey guys im in trouble.. :-( i think i flashed ics exe like 10 times! and i cant get make lockscreen and home button to work... even followed instructions that says wiping to factory reset and cache and dalvik will work but i didn happen!
I did:
Full factory reset (cache and dalvik)
odin super one click....
finished
once it boots never works buttons and lockscreen..
what would you recommend me? Serously im pretty much excited to make it to work!
---------- Post added at 09:36 PM ---------- Previous post was at 09:27 PM ----------
Maesedroid said:
Hey guys im in trouble.. :-( i think i flashed ics exe like 10 times! and i cant get make lockscreen and home button to work... even followed instructions that says wiping to factory reset and cache and dalvik will work but i didn happen!
I did:
Full factory reset (cache and dalvik)
odin super one click....
finished
once it boots never works buttons and lockscreen..
what would you recommend me? Serously im pretty much excited to make it to work!
Click to expand...
Click to collapse
Ok i did it work...
Just followed instructions, dont change the lenguage and let google sync everything... that was what i did different i dont know why happened.
Hope heps to anyone with this issue

Got mkne to work
Thanks to the vid and all the help.

1. Download I727UCALC4_OneClick.exe. Google it. You need a PC.
2. Put your phone in download mode by turning it off. Then hold vol up+down. Insert a usb cable into the phone that was already connected to your computer. Let go when you see instructions. Hit vol up to continue.
3. Run the exe file. Start it. Absolutely don't fiddle with the device or even your computer while it is updating. Wait a while and it will finish and reboot on its own.
4. Enjoy.
I don't mess with the Dalvik, cache, or factory reset. Seems to cause me problems.

Here are the steps to ICS, CWM, Root
1) download the ICS Leak (link all over the place)
2) Do a titanium backup of your apps to your SD card (if you have root)
3) Power off, reseat battery
4) Launch the .exe file w/ the ICS link. A program with a bunch of empty squares will pop up.
5) Push and hold Vol up + Vol down and plug in the USB cable (dont touch the power button)
6) Hit the up Volume to confirm download mode
7) In the ICS program you will see one of the squares turn yellow and say something like 0:com8 and in the text field below says something about complete or connected.
8) Make sure only the restart is checked. All others should be unchecked. Hit start. It will take a good 10-15 minutes.
9) When it completes it should reboot the phone and you will have working ICS.
10) Power off phone. Go back into download mode using above steps, and use odin to flash CWM using the PDA option. CWM link can be found in a dozen places.
11) Reboot and now you have ICS w/ CWM.
12) Download the Superuser CWM Flashable apk and put on SD card.
13) Power off phone. Hold Vol up + Vol down + power and you will go into CWM.
14) Make backup of rom using CWM. Then flash the superuser apk (linked in developement) and then reboot.
15) profit.
Was going to make a guide thread but looks like there is already one. All links are included in his post. seems pretty accurate. Between my outline and his, you should be fine =)
http://forum.xda-developers.com/showthread.php?t=1566737

Got all working thanks for the help. I needed kies and the factory usb cable.
Sent from my SAMSUNG-SGH-I727 using xda premium

Tricky: Optimus One stuck at LG logo

Hey guys,
I got a little problem here and would appreciate any help. As you might have guessed from the title I have an Optimus One here that won't boot. It is stuck on LG logo screen. The phone is not mine but my father-in-law's and I told him I would have a look since his warranty is already void. He told me that he turned it off because it was gettin really slow (and he does that from time to time to clear memory) and as he wanted to turn it on again, it was stuck on LG logo. And has been since. I can still access emergency mode though, but that's it!
Now, I know that there are a lot of threads that treat this problem but in every one of these threads people solve the problem by flashing a stock ROM via KDZ. And that doesn't work for me. It just won't go through with the whole process. I'm flashing in emergency mode and always at some point you hear the sound indicating that a USB device has been unplugged and it starts to boot (I don't know if it is supposed to cause I've never had one of these phones in my hand that was working properly, only this broken one) but obviously gets stuck at LG logo. After a while I get an error from KDZ and thats it.
I also tried with LGMDP, which didn't work either. And obviously I tried a hard-reset, which didn't do anything.
I really don't know what to do with that stupid thing. But I am 100% convinced that it can be revived because emergency mode is still accessable.
Can any of you guys help me? Would be much appreciated!!
Cheers

Hard reset!! again...mb try to flash CWM and wipe data/cache/dalvik

Hard-Reset doesn't work. Just leaves me at the lg logo again. How do you flash CWM? You mean with LGDMP?

tried it, didn't do anything. Thanks for the effort though...

No. KDZ
I`ve broken CWM and killed my O1. And just flash CWM via KDZ and reflesh ROM. It helps me

@ElZeck, when you are flashing with KDZ, what is the error that you get? Also, what is the operating system on your computer? I think I had trouble using KDZ on Windows 7/8, but Windows XP worked just fine. Maybe you might want to try using KDZ on a different computer.

Hey guys, thanks for your replies!
@Kill4File: How do you flash CWM with KDZ? I tried with LGMDP but I wouldn't know what file I would need to do so with KDZ. Can you supply the file?
@sweetnsour: I don't recall the error exactly. I know it ran through parameters until 100 twice and then it got stuck at sth. like wPrm 8. That sound familiar to you? OS is Windows 7.

Just download a recovery like cwm or twrp, then extract the .img file and flash that through lgmdp.
Edit : if you start your phone what happens?
Sent from my LG-P500 using xda app-developers app

Thanks for your reply, TheAndroidGeek, I already did that und it didn't change anything. When I start the phone, the LG logo pops up and that's it.

ElZeck said:
Thanks for your reply, TheAndroidGeek, I already did that und it didn't change anything. When I start the phone, the LG logo pops up and that's it.
Click to expand...
Click to collapse
Did you boot into recovery by pressing home +volume down +power?
Sent from my LG-P500 using xda app-developers app

ElZeck said:
Hey guys, thanks for your replies!
@Kill4File: How do you flash CWM with KDZ? I tried with LGMDP but I wouldn't know what file I would need to do so with KDZ. Can you supply the file?
@sweetnsour: I don't recall the error exactly. I know it ran through parameters until 100 twice and then it got stuck at sth. like wPrm 8. That sound familiar to you? OS is Windows 7.
Click to expand...
Click to collapse
I remember my friend bricking his LG Mytouch, so I tried to help him out with KDZ. I believe you got a similar error (and he was also using Windows 7). I think looking for a different computer to use KDZ on might be the key, especially if you find a Windows XP computer. Basically Windows 7 caused trouble for my friend and me, and Windows 8 wasn't any better. My old XP desktop got the job done though.
This is what I do when I use KDZ (don't miss the words in bold):
1. Manually boot your phone into emergency mode, with emphasis on manually. To do so, hold Back + Vol Up + Power.
2. Plug the cable into the computer first, and then the other end into the phone, in that order. I know some people are used to plugging the cable into the phone first and then into the computer, but sometimes (at least when the phone is normally booted) the computer doesn't detect the phone.
2a. Just making sure, I assume that since your computer at least began the KDZ flash, you already have the drivers for your phone. If you do decide to try it on a different computer, remember to install the drivers (reasons on why I use Windows XP in the next step). Also, don't forget to disable the LGE Modem in Device Manager.
3. Open KDZ. I don't know why KDZ causes issues for me on Windows 7/8, but on those two operating systems, I get some sort of "compatibility issues." Also, KDZ likes to crash in the middle of a flash. Never had any of those issue in Windows XP (no crashes, and I believe KDZ was built for XP anyway since there aren't any compatibility issues).
4. Make sure you have it set to 3GQCT and DIAG. (If KDZ fails to flash, try the different options under PHONEMODE and also try shaking your phone during the flashing process). Browse to your KDZ file.
5. Begin the flashing process. No matter what happens on your phone (it reboots, makes noises, etc) don't remove the cable until KDZ reads "FINISHED".
6. If the phone fails to boot properly (stuck on bootanimation even though it flashed properly), yank the battery, and hold Home + Vol Down + Power. This will begin a hard reset.
If this is what you've been doing on Windows 7 and it still fails, I highly recommend using Windows XP.
Hopefully that helps

TheAndroidGeek said:
Did you boot into recovery by pressing home +volume down +power?
Sent from my LG-P500 using xda app-developers app
Click to expand...
Click to collapse
Unfortunately, I can't! Only emergency mode is accessable. Anything else (recovery, hard reset,...) leads to LG logo screen.
@sweetnsour: thanks for the detailed description but unfortunately that is exactly what I've been doing...
But there is one silver lining: I didn't try Win XP yet. I'll keep you updated...

Optimus not starting up nor booting. Nothing Please help
Dear friends, I have rooted LG Optimus One P 500. I rooted it using Super One Click. Then flashed the cwm recovery. From then on my mobile wont start, neither boot,. Pc dont recognise it, nor show it. The screen is off inspite how hard I press the combo button, the power button. Nothing will happen. Please help.

ikunalb said:
Dear friends, I have rooted LG Optimus One P 500. I rooted it using Super One Click. Then flashed the cwm recovery. From then on my mobile wont start, neither boot,. Pc dont recognise it, nor show it. The screen is off inspite how hard I press the combo button, the power button. Nothing will happen. Please help.
Click to expand...
Click to collapse
It a hard brick. Don't bother. Go LG service center and get ur phone's board changed
Sent from my LG-P500 using xda premium

I can help
Seriously throw ur device in bin and buy a second hand x8 ,,,it's the best
Send it to lg

Hi!
I got the sam problem. I can't access the recovery mode at all. Once i start it freezez at the logo. No matter what button i press the phone jumpstarts to the logo but from there it's all dead:/ Have you solved this one yet?

Shimozuzukato said:
Hi!
I got the sam problem. I can't access the recovery mode at all. Once i start it freezez at the logo. No matter what button i press the phone jumpstarts to the logo but from there it's all dead:/ Have you solved this one yet?
Click to expand...
Click to collapse
I had this. I took out the battery, replaced it and then plugged into the USB. Got charging screen. From there, adb reboot recovery, restored a backup, and got back up and running (assume you have a usable backup available).

Here is a way to revive your phone
If you can enter recovery mode,your phone is revibable.You can install CyanogenMod 7 Android 2.3.7.
First,you need to download CM7 ROM.
Then download Google Apps.
After you download these files,put your sdcard in other phone,then connect to computer via USB cable.
Transfer the downloaded zip files to sdcard.
Insert your sdcard in your LG Optimus One.
Put your phone into recovery mode(ClockWorkMod recovery is required).
Use Volume buttons to navigate and Menu/Search key to select.
From the main menu,select mounts and storage>format/system.
Also select format/data and format/cache.
Go to main menu and select wipe data/factory reset>yes.
Now,select install zip from sdcard>choose zip from sdcard and select downloaded zip
Also,install Google Apps.
Reboot your phone.
You'll see the LG logo,Don't Panic!Wait a few seconds,and the CM boot animation will appear.
First boot takes some long time to install updates.
You're done!

[Q] HELP.. soft brick

Samsung Galaxy s 4g T959V-Gingerbread. Rooted it with SuperOneClick... Didnt have CWM. when I tried to install Black Ice and ICNINB. Tried doing with Rom Manager. Then read that doesn't work with this phone. Was able to flash AltonX KJ6 kernal through SGS kernel flasher in order or get CWM on the phone. That worked. But when I went to flash the zip files for the roms again. They still didn't work. I thought I was following the directions. Get into download mode> create a backup> wipe data> make sure the mounts were right> then flash the zip file. Well the first time I did i,t it kinda went through. Although I didn't have RED CWM or Linda. Wanted to get Voodoo and LagFix. So I decided to flash again. When it came time to reboot.. it got stuck in a loop between two different Samsung screens.One with a big swoopy S the other just the normalt-mobile samsung screen before it boots up. Going from one to the other never really rebooting. So again I decided to get into download mode again and then flash a recovery backup file. And NOW it just hangs on the Samsung T-Moblie screen. I've tried battery pulls also tried using a JIG. Screen pops up but just freezes there.
Any suggestions??

pistol865 said:
Samsung Galaxy s 4g T959V-Gingerbread. Rooted it with SuperOneClick... Didnt have CWM. when I tried to install Black Ice and ICNINB. Tried doing with Rom Manager. Then read that doesn't work with this phone. Was able to flash AltonX KJ6 kernal through SGS kernel flasher in order or get CWM on the phone. That worked. But when I went to flash the zip files for the roms again. They still didn't work. I thought I was following the directions. Get into download mode> create a backup> wipe data> make sure the mounts were right> then flash the zip file. Well the first time I did i,t it kinda went through. Although I didn't have RED CWM or Linda. Wanted to get Voodoo and LagFix. So I decided to flash again. When it came time to reboot.. it got stuck in a loop between two different Samsung screens.One with a big swoopy S the other just the normalt-mobile samsung screen before it boots up. Going from one to the other never really rebooting. So again I decided to get into download mode again and then flash a recovery backup file. And NOW it just hangs on the Samsung T-Moblie screen. I've tried battery pulls also tried using a JIG. Screen pops up but just freezes there.
Any suggestions??
Click to expand...
Click to collapse
you don't want voodoo lagfix. unreliable, imho.
Try eollie's stock + root in the second post my oneclick thread. It's a stock rom and blastoff v2.5.
Run the oneclick the first time to flash just the kernel and rom.
Click flash bootloaders.
reboot phone to download mode again
flash again, this time with bootloaders.
After that, you should be golden.
Don't forget to read the directions in the OP.

bhundven said:
you don't want voodoo lagfix. unreliable, imho.
Try eollie's stock + root in the second post my oneclick thread. It's a stock rom and blastoff v2.5.
Run the oneclick the first time to flash just the kernel and rom.
Click flash bootloaders.
reboot phone to download mode again
flash again, this time with bootloaders.
After that, you should be golden.
Don't forget to read the directions in the OP.
Click to expand...
Click to collapse
Thank you so much for getting back to me. A couple of questions if I may?
1) if I'm able to get the samsung screen, does that mean I'm able to get into Download mode? It just seems to hang on that samsung T-Mobile screen.
2) The link to dropbox that I'm supposed too click on, seems to be broken... Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel)- https://dl.dropboxusercontent.com/u/10373328/Stock KJ6 + root-One-Click.jar -
Here's what comes up: Error (404)
We can't find the page you're looking for. Check out our Help Center and forums for help, or head back to home.
3) Assuming that I'm able to get to download mode, I just want to check to make sure that I'm reading your directions correctly.
- when I run OneClick the 1st time, it will automatically apply just the kernel and rom.
- Then I'm supposed to reboot? Or flash the bootloaders?
- After that I'm supposed to reboot phone to download mode again.
- Flash Bootloaders again??
I'm sure I'm messing up the directions or rather misreading them.
Sorry for that. Kinda NOOB when it comes to HEIDENALL

pistol865 said:
Thank you so much for getting back to me. A couple of questions if I may?
Click to expand...
Click to collapse
Well, seeming it is the Q&A forum
pistol865 said:
1) if I'm able to get the samsung screen, does that mean I'm able to get into Download mode? It just seems to hang on that samsung T-Mobile screen.
Click to expand...
Click to collapse
Yes. Sometimes even if the phone seems to turn on and go to a black screen, you might still be able to get to download mode.
Seriously, this phone is like a tank... unless you flash gt-i9000 or vibrant roms. Then you will brick your phone.
pistol865 said:
2) The link to dropbox that I'm supposed too click on, seems to be broken... Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel)- https://dl.dropboxusercontent.com/u/10373328/Stock KJ6 + root-One-Click.jar -
Here's what comes up: Error (404)
We can't find the page you're looking for. Check out our Help Center and forums for help, or head back to home.
Click to expand...
Click to collapse
Dang, I'm uploading a new link to this. Give it 20 minutes. and go back and try the link again.
pistol865 said:
3) Assuming that I'm able to get to download mode, I just want to check to make sure that I'm reading your directions correctly.
- when I run OneClick the 1st time, it will automatically apply just the kernel and rom.
- Then I'm supposed to reboot? Or flash the bootloaders?
- After that I'm supposed to reboot phone to download mode again.
- Flash Bootloaders again??
I'm sure I'm messing up the directions or rather misreading them.
Sorry for that. Kinda NOOB when it comes to HEIDENALL
Click to expand...
Click to collapse
Put your phone into download mode, either by holding vol+ and vol- and plugging in the usb from your computer (keep holding vol+ and vol- till you see download mode) or use a jig.
Once your in download mode. Flash the first time. Yes, it will only flash the kernel and rom. The phone will automatically reboot after the flash.
Wait a little bit after the phone reboots, you'll see a little local update happen and reboot the phone again. Then pull the battery and put the phone back into download mode.
Then check the "flash bootloaders" checkbox. flash the oneclick again this time with bootloaders.
After this, you can go anywhere from this rom, except back to froyo. I'm still working on a simple oneclick method for going back to froyo.

bhundven said:
Well, seeming it is the Q&A forum
Yes. Sometimes even if the phone seems to turn on and go to a black screen, you might still be able to get to download mode.
Seriously, this phone is like a tank... unless you flash gt-i9000 or vibrant roms. Then you will brick your phone.
Dang, I'm uploading a new link to this. Give it 20 minutes. and go back and try the link again.
Put your phone into download mode, either by holding vol+ and vol- and plugging in the usb from your computer (keep holding vol+ and vol- till you see download mode) or use a jig.
Once your in download mode. Flash the first time. Yes, it will only flash the kernel and rom. The phone will automatically reboot after the flash.
Wait a little bit after the phone reboots, you'll see a little local update happen and reboot the phone again. Then pull the battery and put the phone back into download mode.
Then check the "flash bootloaders" checkbox. flash the oneclick again this time with bootloaders.
After this, you can go anywhere from this rom, except back to froyo. I'm still working on a simple oneclick method for going back to froyo.
Click to expand...
Click to collapse
Once again, many thanks for your time and patience
.Just wondering if you fixed that link yet?
I keep clicking on: Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel) , it takes me to this page: https://dl.dropboxusercontent.com/u/10373328/Stock KJ6 + root-One-Click.jar, but I'm still getting the message: Error (404)
We can't find the page you're looking for. Check out our Help Center and forums for help, or head back to home.
That link is Underneath the link: eollie: AntonX's BwaT + Stock Rom... on the page: http://forum.xda-developers.com/showthread.php?t=1358498 .
Again, pardon my detailed reply, but I just want to be sure that I'm clicking on the correct link.

pistol865 said:
Once again, many thanks for your time and patience
.Just wondering if you fixed that link yet?
I keep clicking on: Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel) , it takes me to this page: https://dl.dropboxusercontent.com/u/10373328/Stock KJ6 + root-One-Click.jar, but I'm still getting the message: Error (404)
We can't find the page you're looking for. Check out our Help Center and forums for help, or head back to home.
That link is Underneath the link: eollie: AntonX's BwaT + Stock Rom... on the page: http://forum.xda-developers.com/showthread.php?t=1358498 .
Again, pardon my detailed reply, but I just want to be sure that I'm clicking on the correct link.
Click to expand...
Click to collapse
Yea man. I updated the second post in the onclick thread. Here is the timestamp from the post: "24th July 2013 12:39 PM"
You need to clear the cache on your browser and reload that page. The link is here.

bhundven said:
Yea man. I updated the second post in the onclick thread. Here is the timestamp from the post: "24th July 2013 12:39 PM"
You need to clear the cache on your browser and reload that page. The link is here.
Click to expand...
Click to collapse
Ran into a new problem now...
It's me again... Sorry if I'm being a pain..
So I downloaded the link.. I have it on my desktop...I put my phone into download mode..(Yellow Triangle> Do not unplug).. I clicked on your OneClick... it loads but then tells me to connect my device... It keeps telling me I'm disconnected..
When I plug my phone into my compt via USB.. it now tells me that my device is unrecognized.
Now what did I do wrong?
I was hoping I was close to a resolution... another roadblock.
Can I fix it?
Once again, thank you for any and all the help and advice you have given me.

There is s thread called fresh out of the box now what. It will help you immensely. Sounds like you need to uninstall all samsung and android drivers and reinstall them. In that thread there is a application for your computer called usbview that can remove them (I probably misspelled that apps name). The thread is by lumin30.

limeaide said:
There is s thread called fresh out of the box now what. It will help you immensely. Sounds like you need to uninstall all samsung and android drivers and reinstall them. In that thread there is a application for your computer called usbview that can remove them (I probably misspelled that apps name). The thread is by lumin30.
Click to expand...
Click to collapse
I already installed usbDview.. ran as admisistrator... removed anything that said samsung or android.. plugged in my samsung phone and Still is not recognized. Also downloaded Zadig.. to install the drivers to the phone.. but it doesn't recognize the phone.
Anything else that I'm missing? Can I download something online so that when i plug in via USB it will recognize my phone?

You have tried different usb ports too? Other than that maybe a different computer. I know bhundven says dont use front usb ports too.

limeaide said:
You have tried different usb ports too? Other than that maybe a different computer. I know bhundven says dont use front usb ports too.
Click to expand...
Click to collapse
Tried different usb ports as well as a different computer.. When I hoked up to a different computer, at first it said it was installing the drivers.. then it stopped and said USB device Unrecognized.
Is it a matter of drivers? Can I get them offline? and then plug in my phone?

limeaide said:
You have tried different usb ports too? Other than that maybe a different computer. I know bhundven says dont use front usb ports too.
Click to expand...
Click to collapse
Computer pop up says: usb device has malfunctioned and windows does not recognize it.

limeaide said:
You have tried different usb ports too? Other than that maybe a different computer. I know bhundven says dont use front usb ports too.
Click to expand...
Click to collapse
I just went to the samsung website and downloaded the drivers from there.. Still having the same problem... usb device has malfunctioned and windows does not recognize it.

IIRC when you plug the phone in you need to stop it from installing the samsung drivers. Then use zadig to install them like illustrated in lumin30s guide.
Be sure to use a rear usb port if on a desktop. Dont change ports if things start to work. If you have to use a different port I suggest using usbdeview to remove drivers each time. It seems like overkill but it might work.

limeaide said:
IIRC when you plug the phone in you need to stop it from installing the samsung drivers. Then use zadig to install them like illustrated in lumin30s guide.
Be sure to use a rear usb port if on a desktop. Dont change ports if things start to work. If you have to use a different port I suggest using usbdeview to remove drivers each time. It seems like overkill but it might work.
Click to expand...
Click to collapse
ALMOST THERE.. I think..lol
I think I successfully ran the program.. phone turns on now.. Yayyy...
New Problem:
The screen now says:NO SIM CARD IN PHONE
AFTER YOU INSERT THE CARD, PLEASE REBOOT
EMERGENCY CALLS CAN BE USED
The SIM card is already installed... the phone is not recognizing it now.
What now??

limeaide said:
IIRC when you plug the phone in you need to stop it from installing the samsung drivers. Then use zadig to install them like illustrated in lumin30s guide.
Be sure to use a rear usb port if on a desktop. Dont change ports if things start to work. If you have to use a different port I suggest using usbdeview to remove drivers each time. It seems like overkill but it might work.
Click to expand...
Click to collapse
One more thing, I installed Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel)... That should mean the phone is rooted.. correct? although I don't see SUPERUSER in my apps list.. Also does this have CWM installed? Can I flash a custom rom moving forward?? If so which one do you consider the best? I originally was having trouble because I was running into low internal memory and couldn't download many apps. That's why I wanted to flash BLACK ICE originally.. I thought that would fix my problem..

This phone suffers from low internal memory. However you can move almost all apps to your sdcard from within the rom. If the things that do not work on the JB roms are ok with you I hear good things about those.
As for the sim card..Im not sure. The one click you used doesnt have SU included because it is a stock rom with custom rooted kernel. You would have to install it from the Play store. But I reccomend flashing a different rom anyway. Again the JB roms seem to be pretty awesome so that is a option.

limeaide said:
This phone suffers from low internal memory. However you can move almost all apps to your sdcard from within the rom. If the things that do not work on the JB roms are ok with you I hear good things about those.
As for the sim card..Im not sure. The one click you used doesnt have SU included because it is a stock rom with custom rooted kernel. You would have to install it from the Play store. But I reccomend flashing a different rom anyway. Again the JB roms seem to be pretty awesome so that is a option.
Click to expand...
Click to collapse
Did I do something wrong because I didn't pull the sim card when I flashed: Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel). Also does Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel) come with CWM Red?

pistol865 said:
Did I do something wrong because I didn't pull the sim card when I flashed: Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel). Also does Stock_KJ6_+_root-One-Click.jar (this has the blastoff v2 kernel) come with CWM Red?
Click to expand...
Click to collapse
reboot to cwm (recovery). wipe cache partition. advanced -> wipe dalvik cache. advanced -> fix permissions. reboot phone. Let it sit for a few minutes before doing anything (I'd say 10-15 minutes).
Oh weird. did that oneclick come with blastoff v2 and not 2.5?
Hmm, then do this. download blastoff v2.5, put that on your sdcard and install it from red cwm.
Then do what I said above. You should be back to blue after rebooting to recovery after flashing that kernel.
EDIT: if you really want red cwm (voodoo lagfix), I really don't know why you'd want that, but checkout my older subtly modified stock kernel.

bhundven said:
reboot to cwm (recovery). wipe cache partition. advanced -> wipe dalvik cache. advanced -> fix permissions. reboot phone. Let it sit for a few minutes before doing anything (I'd say 10-15 minutes).
Oh weird. did that oneclick come with blastoff v2 and not 2.5?
Hmm, then do this. download blastoff v2.5, put that on your sdcard and install it from red cwm.
Then do what I said above. You should be back to blue after rebooting to recovery after flashing that kernel.
EDIT: if you really want red cwm (voodoo lagfix), I really don't know why you'd want that, but checkout my older subtly modified stock kernel.
Click to expand...
Click to collapse
No..no.. I'll definitely take your word for it.. I'll stick with the blue. I just thought that with the lagfix, it would fix my problem with internal memory.
My problem now is my SIM card.. The phone reboots and I get : NO SIM CARD IN PHONE
AFTER YOU INSERT THE CARD, PLEASE REBOOT
EMERGENCY CALLS CAN BE USED]
I did as you said:
reboot to cwm (recovery). wipe cache partition. advanced -> wipe dalvik cache. advanced -> fix permissions. reboot phone. Let it sit for a few minutes before doing anything (I'd say 10-15 minutes).
Should I still install: download blastoff v2.5?
Thank you again for ALL your help.. You guys saved my phone..

my lg o1 stuck at lg logo, need help

Hi
I tried to install cm11
on The device
And the middle of the installation I registered it was canceled
So I had to install cm7
from the Memory card
I installed it
When I run the device
He got stuck LG logo
What to do?
And I used this guide: http://forum.xda-developers.com/showthread.php?t=2589303
And I followed - Upgrading from another CM10.2 or Older ROM
Sorry for the english, I'm from Israel
And I used google translate

eran32 said:
Hi
I tried to install cm11
on The device
And the middle of the installation I registered it was canceled
So I had to install cm7
from the Memory card
I installed it
When I run the device
He got stuck LG logo
What to do?
And I used this guide: http://forum.xda-developers.com/showthread.php?t=2589303
And I followed - Upgrading from another CM10.2 or Older ROM
Sorry for the english, I'm from Israel
And I used google translate
Click to expand...
Click to collapse
Boot back in to your recovery and wipe cache and dalvik cache. Format system and then install your ROM. There are major differences between CM11 and CM7. When making big jumps like that it's always best to format system before installing a ROM.

shinobisoft said:
Boot back in to your recovery and wipe cache and dalvik cache. Format system and then install your ROM. There are major differences between CM11 and CM7. When making big jumps like that it's always best to format system before installing a ROM.
Click to expand...
Click to collapse
I just did factory reset via cwm
And still have a problem
So do just what you say and do
system format?
You mean that you are going to have a system folder in the mount and stroage given formatting?

eran32 said:
I just did factory reset via cwm
And still have a problem
So do just what you say and do
system format?
You mean that you are going to have a system folder in the mount and stroage given formatting?
Click to expand...
Click to collapse
In CWM select Wipe data/factory reset. This will wipe the cache, dalvik cache and a couple other partitions. Then go to Mounts and Storage and select Format System. That will format the system partition.
Now go back to CWM home screen and install your ROM.

shinobisoft said:
In CWM select Wipe data/factory reset. This will wipe the cache, dalvik cache and a couple other partitions. Then go to Mounts and Storage and select Format System. That will format the system partition.
Now go back to CWM home screen and install your ROM.
Click to expand...
Click to collapse
thanks man, now my lg o1 works

Glad to help
Sent from my LG-P769 using Tapatalk

Hi,
May I ask for help here (instead of creating a new thread) ? I have the same problem: The device is booting loop at the LG screen. Bricked it when I wanted to save the ROM with ROM Manager.
I have no access to recovery mode, but Emergency mode does work (With and without battery).
I've followed multiple guides, including this one:
Most of you are stuck on a yellow screen with”Emergency mode!!” or the phone is not responding at all. You guys wanted a custom rom like Optimus Prime-v2 and let me tell you, this time it will work. Optimus One P500 comes with stock android 2.2 – V10a, V10b … and android 2.2.1 – V10n. They might be done for different regions depending upon the phone release and its popularity and definitely bug fixes and enhancements. To have Prime-v2 on your handset you will require V10a or V10b on your handset. Reason, V10n stock cannot be rooted easily. Rooting the handset is must if Prime-v2 is required on the device. Steps to install V10a, V10b series. I am using Windows 7 32-bit, 3 GB RAM laptop:
1. Clean your system first; get rid of LG PC suite and other stuff shown in Uninstall Program with vendor name as LG. Remove MSXML builts from the handset. Remove Nokia and other drivers if they are on system like Ovi suite etc. I also removed a lot of Microsoft runtime environments. Not sure about the reason but it worked for me.
2. LG usb device drivers, download the application B2CAppSetup.exe http://csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe .
3. In the Menu Bar, click "Options & Help", and click "Country & Language". Select the appropriate Country & Language. I used India and select P500 from the list that popup after you change the country and region. It will download, install and save the drivers somewhere in C:\LGP500\USB_Driver, it will prompt to open the rar files, just click and install the exes seen in them.
4. Reboot the system.
5. Right click on Computer -> Properties -> Device Manager and see for three drivers – LG android usb modem, LGE serial usb port and LG composite USB device. Disable the modem driver and reboot once again.
6. Switch off the phone and press volume up + BACK button + POWER button. Phone should turn yellow with text “Emergency Mode!!” To switch it off you have to remove the battery (I know it hurts, but that’s the only way out here). Switch off and let’s continue with the setup.
7. To do the KDZ of system you will require the KDZ software updater, links keep going off and on internet. Try searching for “KDZ_FW_UPD_EN” or “KDZ_FW_UPD_EN.7z” in Google and download the software. It should be somewhere around 2.3 MB. To use it you will required some good version of WinZip or winrar again Google it and install the 7z archive utility.
8. Install msxml.msi as the manual or readme.txt says to do so.
9. To get the V10x Official ROM, you need to first determine the ROM of your choice. List of all firmware available for LG Optimus One P500 (list of codes) http://csmg.lgmobile.com:9002/csmg/b2c/client/ezlooks_model_list.jsp?model=LGP500 , search for your country (use IE it looks sexy in it), I looked out for IND/INDIA. Download link to the ROM is http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/XXXXX/V10a_00/V10A_00.kdz where XXXX is code from list of codes. In my case it was: AINDBK. Save the file.
10. Prepare the handset by removing the SD card and boot it to emergency mode (some are already stuck on it so reading this post…: D) using the key combination stated above.
11. Connect to the PC and it should say, installing drivers’ blah… blah … your device is ready to use now.
12. Run the KDZ updater downloaded in step 7. Select 3GQCT in Type, DIAG in PhoneMode, and browse for ROM V10a in KDZ file and hit Launch Software update. Wait for somewhere around 5-10 minutes. It should say ===FINISHED=== in the log window of updater.
13. Handset will reboot, if not wait for another 5 minutes. Unplug from USB and try to switch it on.
Click to expand...
Click to collapse
My problem is that KDZ still doesn't find my phone after all these attempts - I uninstalled the device driver, then reinstalled it succesfully (B2CAppSetup.exe). I reboot, install msxml.msi, and start KDZ.
Next, I power my phone in Emergency phone, plug it, and it is detected for the first time by the computer. I do have LGE Android Platform Composite USB Device, listed in the Device Manager, as well as LGE Android Platform USB Modem.
Using KDZ, I select the "3GQCT" type, phone mode "DIAG", with the correct KDZ file I've downloaded earlier. Once I launch the software update, phone is not found.
I've tried several times, including desactivating the LG Modem from the Device Manager; unfortunately, when I disable it I need to reboot - I do reboot, but then the LGE Android Platform Composite USB Device is absent from the device manager, and isn't detected by Windows at all, until I fully reinstall the driver (...).
I really don't know what I'm doing wrong - note that I use a laptop with Windows 7 x64; I know laptops handle USB port in a different way than desktops.
Can you help please?
I must be SO close... =(
Thanks, I really appreciate it!

GameX2 said:
Hi,
May I ask for help here (instead of creating a new thread) ? I have the same problem: The device is booting loop at the LG screen. Bricked it when I wanted to save the ROM with ROM Manager.
I have no access to recovery mode, but Emergency mode does work (With and without battery).
I've followed multiple guides, including this one:
My problem is that KDZ still doesn't find my phone after all these attempts - I uninstalled the device driver, then reinstalled it succesfully (B2CAppSetup.exe). I reboot, install msxml.msi, and start KDZ.
Next, I power my phone in Emergency phone, plug it, and it is detected for the first time by the computer. I do have LGE Android Platform Composite USB Device, listed in the Device Manager, as well as LGE Android Platform USB Modem.
Using KDZ, I select the "3GQCT" type, phone mode "DIAG", with the correct KDZ file I've downloaded earlier. Once I launch the software update, phone is not found.
I've tried several times, including desactivating the LG Modem from the Device Manager; unfortunately, when I disable it I need to reboot - I do reboot, but then the LGE Android Platform Composite USB Device is absent from the device manager, and isn't detected by Windows at all, until I fully reinstall the driver (...).
I really don't know what I'm doing wrong - note that I use a laptop with Windows 7 x64; I know laptops handle USB port in a different way than desktops.
Can you help please?
I must be SO close... =(
Thanks, I really appreciate it!
Click to expand...
Click to collapse
First, serious word of advice. Stay away from ROM Manager. It does not handle this device correctly.
It sounds to me like you are not entering Emergency Mode correctly. Yes, the LG USB Modem must be disabled. Power off the device. Press the "Back + Volume Up + Power" buttons together until the device boots to Emergency Mode. Now connect device to you PC/laptop. This can also be done with the battery removed and the device off. Same method except no power button involved. Press the "Volume Up + Back" buttons while attaching your device to your data cable, assuming it's already attached to your PC/laptop.
The attachment I've posted is a stripped down version of the KDZ Updater. All you need to supply is the correct KDZ file for your phone. This one does not require any of LG's other crap software either.
Download to your PC. Extract to a folder of your choosing. Read the ReadMe.txt carefully and follow it's directions to the letter. I just used this to revive two ( 2 ) bricked P506's.
If you can boot to fastboot mode, there is a tool in my signature, Android Flash Recovery, that is designed to flash a recovery to a device with fastboot. So you have two options to restore, revive your device.

shinobisoft said:
First, serious word of advice. Stay away from ROM Manager. It does not handle this device correctly.
It sounds to me like you are not entering Emergency Mode correctly. Yes, the LG USB Modem must be disabled. Power off the device. Press the "Back + Volume Up + Power" buttons together until the device boots to Emergency Mode. Now connect device to you PC/laptop. This can also be done with the battery removed and the device off. Same method except no power button involved. Press the "Volume Up + Back" buttons while attaching your device to your data cable, assuming it's already attached to your PC/laptop.
The attachment I've posted is a stripped down version of the KDZ Updater. All you need to supply is the correct KDZ file for your phone. This one does not require any of LG's other crap software either.
Download to your PC. Extract to a folder of your choosing. Read the ReadMe.txt carefully and follow it's directions to the letter. I just used this to revive two ( 2 ) bricked P506's.
If you can boot to fastboot mode, there is a tool in my signature, Android Flash Recovery, that is designed to flash a recovery to a device with fastboot. So you have two options to restore, revive your device.
Click to expand...
Click to collapse
Hey, cheers !!
That was all I needed to do with this simple version, the update got applied properly, and I saw the FINISHED message.
My phone "rebooted". Well, what I see now if the Android logo with a big " ! ", which is normal according to what I've read.
I will do more ressearch to make sure what I do if correct now: is this safe to power off/reboot at this screen? I believe it's the last step.

GameX2 said:
Hey, cheers !!
That was all I needed to do with this simple version, the update got applied properly, and I saw the FINISHED message.
My phone "rebooted". Well, what I see now if the Android logo with a big " ! ", which is normal according to what I've read.
I will do more ressearch to make sure what I do if correct now: is this safe to power off/reboot at this screen? I believe it's the last step.
Click to expand...
Click to collapse
Yep. Sounds like you're good to go

shinobisoft said:
Yep. Sounds like you're good to go
Click to expand...
Click to collapse
Thanks
Holding the power button does not shut it down - pull the battery, right (It won't screw the thing right before the end ? XD ) ?
Look.. correct:
12 - Start the phone again. If you get stuck in a screen with an Android and an exclamation mark ("!") in a triangle, just unplug the USB cable and the battery. Plug the battery again and start the phone. It will take 2 to 5 minutes to reboot for the first time and the boot animation will be the stock LG (your carrier's stock animation is lost for good), but chances are your phone is intact, with all it's apps and configurations working the same as before the incident. When the boot finishes, turn off the phone again and put back the SD Card you took off on the first step.
Click to expand...
Click to collapse
I really don't want to mess anything at this point.

GameX2 said:
Thanks
Holding the power button does not shut it down - pull the battery, right (It won't screw the thing right before the end ? XD ) ?
Look.. correct:
I really don't want to mess anything at this point.
Click to expand...
Click to collapse
If KDZ Updater says it's done and your device has rebooted to recovery, then yes you can pull the battery to shut it down. You may still need to do the key presses for a factory reset, but the key combo has slipped my mind for the moment. Old age...

shinobisoft said:
If KDZ Updater says it's done and your device has rebooted to recovery, then yes you can pull the battery to shut it down. You may still need to do the key presses for a factory reset, but the key combo has slipped my mind for the moment. Old age...
Click to expand...
Click to collapse
Really nice, I have the Android logo !!
I will wait - people says it can take up to 5-15 minutes or even more - I won't shutdown on the logo.
Letting you know as soon as it's done.
***
After a while, the device booted, and I had a few messages saying it was restoring all the settings!
No data loss! Nothing (I had backed up my contacts and apps on my SD Card already - I was unsure if I would have loose my SMSs, I didn't) is lost !
Dude, seriously, thanks A BUNCH - this is ridiculous, I screwed the phone up at like 10PM yesterday, and did not went to sleep until 2AM because I couldn't fix the thing (I had access to FastBoot at first. I did a process to restore it from Fastboot, it should have worked properly, but then I only had access to the LG logo. Man, I thought I was toasted, and had to spend 50$ for a new phone, just because of a stupid mistake. Never would I thought that SAVING the ROM of my SD card would have screwed up the ROM!)...
I spent like 6 hours today trying to fix it, reinstalling the drivers over and over again... Installing a fresh new Windows XP on a machine, just so I could install everything on a new operating system to figure out the problem...
That was just plain crazy, seriously.
****BONUS****
The first thing I've noticed when I booted my phone was the BLACK notification bar
I really love black, and I once did ressearch a while ago to see if I could turn my white bar into black (I have Android 2.2.1), but no success.
I just realised I got it updated "accidentally" to Android 2.3, and so I was on Android 2.2. since 2011 (when I bought it) !
Well, nice addition, it is sexier with black
I belive it's because of the KDZ file I've used... I had a really hard time to find one, all the links were broken, from 2010, it's a old phone. I found the KDZ from Koodo, Canadian French, exactly my own.
Guess I "accidentally" upgraded to Android 2.3 then Nice addition !
I have no experience at all with fixing Android devices / ROM stuff - I'm used with Windows/Linux and others, but Android (although Android is a version of Linux) is another thing for me.
THANKS - seriously, I wouldn't have made it without your help.
YAY

GameX2 said:
Really nice, I have the Android logo !!
I will wait - people says it can take up to 5-15 minutes or even more - I won't shutdown on the logo.
Letting you know as soon as it's done.
***
After a while, the device booted, and I had a few messages saying it was restoring all the settings!
No data loss! Nothing (I had backed up my contacts and apps on my SD Card already - I was unsure if I would have loose my SMSs, I didn't) is lost !
Dude, seriously, thanks A BUNCH - this is ridiculous, I screwed the phone up at like 10PM yesterday, and did not went to sleep until 2AM because I couldn't fix the thing (I had access to FastBoot at first. I did a process to restore it from Fastboot, it should have worked properly, but then I only had access to the LG logo. Man, I thought I was toasted, and had to spend 50$ for a new phone, just because of a stupid mistake. Never would I thought that SAVING the ROM of my SD card would have screwed up the ROM!)...
I spent like 6 hours today trying to fix it, reinstalling the drivers over and over again... Installing a fresh new Windows XP on a machine, just so I could install everything on a new operating system to figure out the problem...
That was just plain crazy, seriously.
****BONUS****
The first thing I've noticed when I booted my phone was the BLACK notification bar
I really love black, and I once did ressearch a while ago to see if I could turn my white bar into black (I have Android 2.2.1), but no success.
I just realised I got it updated "accidentally" to Android 2.3, and so I was on Android 2.2. since 2011 (when I bought it) !
Well, nice addition, it is sexier with black
I belive it's because of the KDZ file I've used... I had a really hard time to find one, all the links were broken, from 2010, it's a old phone. I found the KDZ from Koodo, Canadian French, exactly my own.
Guess I "accidentally" upgraded to Android 2.3 then Nice addition !
I have no experience at all with fixing Android devices / ROM stuff - I'm used with Windows/Linux and others, but Android (although Android is a version of Linux) is another thing for me.
THANKS - seriously, I wouldn't have made it without your help.
YAY
Click to expand...
Click to collapse
Glad things worked out for ya And helping is what I'm here for

shinobisoft
shinobisoft said:
Yep. Sounds like you're good to go
Click to expand...
Click to collapse
Thanks for helping NOOBS, i appreciate that!