Database Info

ROM picture Change Error

Well I've tried everything possible, updated device manager fro vista. MDA Vario 3, connects for active sync but after running KaiserCustomRUU.exe. where it update the crrunt ROM version... it changes the screen into 3 color screen , after few minutes in the same condition............ 0% process........ and then........... shows me an error message as under:
ERROR [262]: UPTAE ERROR
The ROM update utility has encountered communication errors during the update process. The program will guide you step-by-
step to recover from the errors so you can continue the update.
and i need to restart MDA. although on recovery process it directly come to normal screen instead of 3 color screen, which means (i guess) it never started changing ROM current picture.
Any help about it plz.
Regards
Iaan

iskhan said:
Well I've tried everything possible, updated device manager fro vista. MDA Vario 3, connects for active sync but after running KaiserCustomRUU.exe. where it update the crrunt ROM version... it changes the screen into 3 color screen , after few minutes in the same condition............ 0% process........ and then........... shows me an error message as under:
ERROR [262]: UPTAE ERROR
The ROM update utility has encountered communication errors during the update process. The program will guide you step-by-
step to recover from the errors so you can continue the update.
and i need to restart MDA. although on recovery process it directly come to normal screen instead of 3 color screen, which means (i guess) it never started changing ROM current picture.
Any help about it plz.
Regards
Iaan
Click to expand...
Click to collapse
First did you do everything in this post?

iskhan said:
Well I've tried everything possible, updated device manager fro vista. MDA Vario 3, connects for active sync but after running KaiserCustomRUU.exe. where it update the crrunt ROM version... it changes the screen into 3 color screen , after few minutes in the same condition............ 0% process........ and then........... shows me an error message as under:
ERROR [262]: UPTAE ERROR
The ROM update utility has encountered communication errors during the update process. The program will guide you step-by-
step to recover from the errors so you can continue the update.
and i need to restart MDA. although on recovery process it directly come to normal screen instead of 3 color screen, which means (i guess) it never started changing ROM current picture.
Any help about it plz.
Regards
Iaan
Click to expand...
Click to collapse
you have vista then your prob better off flashing via sd, also you shouldn't have started a new thread to ask this question, this forum isn't intended for every time someone has a problem and searches and can't find the answer to start a new thread. PM someone you see posting that seems knowledgeable and ask that person if you can't find what you are looking for.

Flashing through SD is always the best. And its a lot safer than USB way.

Thanks for the help guys... closing thread as this issue can be fixed by reading the sticky and also the wiki..
Peace,
Josh

BSNL Penta IS703c

New Update
If you are facing some lag or hanging problem with the tab,
download this attachment.
Unzip the files using WinRAR.
Now follow the manual provided in the file with step by step instructions.
Before software Updation your Tablet must be at least 60% Charged.
Unsuccessful software Updation may cause damage to Tablet.
------------------------------------------------------------------------------------------------------------------------
If you have any problems with the tab:crying:, download the file from this link and follow the instructions given here.
Before doing so, first press the reset button and then start the tab by pressing power button.
It should work:victory:. Otherwise try flashing the device with the procedure which is included in the file.:highfive:

I have this tab. I am facing problem. Tab hang frequently. Please note help
Sent from my Micromax A110 using xda premium

arvindbsp said:
I have this tab. I am facing problem. Tab hang frequently. Please note help
Sent from my Micromax A110 using xda premium
Click to expand...
Click to collapse
Install Advanced task manager and kill the apps regularly. It will save both battery and CPU

Thanks for your reply
Installed task manager but no luck. Tab always hangs when it goes to sleep mode. Please help

arvindbsp said:
Installed task manager but no luck. Tab always hangs when it goes to sleep mode. Please help
Click to expand...
Click to collapse
Can you be more specific?
And did you installed chrome browser, it permanently hangs the tablet.
Try uninstalling the unnecessary softwares.
If there is no much useful info, RESET the tab by pressing the reset button(near power button, using some pin).
Or else try the new updated link in post 1.

i want a custom jellybean rom for my penta is703c
can u guys cook a rom fot this device?

i know it might be long since this thread was created.. but i am having a problem !! can you guys help me ! I try to flash but i am getting loads of message that i cant DECRPYT. see pictures..

[TUT] Unbrick Micromax FunbookPro P500

Hello guys first all of all just forthe info Allwinner A10 tablet cant be hard bricked! You can always flash a livesuit.img and restore your tab back! We dont have the original liveusit.img of the tab but i manage to get back on stock with few steps and this method is confirmed and tested!!
Requirements -
ADB Drivers ( http://www.4shared.com/rar/NY7NE6wm/ADB_Drivers.html )
USB Mouse
Little Brain
Note : If you have CWM installed onyur tab you can simply Restore from your restored backup if you dont have one here it is
http://www.4shared.com/rar/t3ycEEpk/2012-09-25114926.html
Step 1 : - Download the software called Livesuit you can easily google it and find it but here's treat for you!
http://www.yarvik.com/userfiles/yarvikfirmware/YarvikLiveSuit.zip
Step 2 : - Download this image http://www.yarvik.com/userfiles/yarvikfirmware/TAB461EUK_A404.img
Step 3 : - Extract Livesuit software and open Livesuit.exe -- > Whataver pop-ups come just click no! -- > Click on select image and browse to the downloaded TAB461 .img and leave the software as it is
Step 4 : - Now connect your tablet ( make sure it is turned off not in recovery or something , you can do this by holding power button for long ) to the pc/laptop by holding back button! as soon as you attach usb , while holding back button press 'power' button 10 times repeatedly!
Wait and a pop up will come Click 'YES' 2 times it will take 2 mins to flash the image and u will soon boot up!
Step 5 :- Touch wont work on this image! So connect your wired mouse with OTG cable and install CWM and then the backup! as described below
http://www.facebook.com/l.php?u=http%3A%2F%2Fforum.xda-developers.com%2Fshowthread.php%3Ft%3D1906247&h=xAQG1BrKz
If having any problem comment below! i will solve it!
If u like my work....just hit THANKS

In spite of installing the adb drivers my device does not show please help

if i want to use this process to root my funbook P275, without back button, will it work?

Wifi not working..
after un brick my micromax P500..
wifi not working..
i thing wifi driver is missing.. plsssss help.....
---------- Post added at 02:18 PM ---------- Previous post was at 01:39 PM ----------
pls help bro....

plsss help....
hi bro.. i bricked my funbook pro.. and now i recover it but my wifi driver is missing.. now wifi is not working..
do u give me a idea where i got micromax P500 wifi driver..
Plss help.....

please help...!!!!
I too unbricked my funbook p500 ....
but after that my wifi is not working ..... i trid many rom but am not able to use wifi
pls help......

IMG of working P500 (without wifi problems)
cool.gautam said:
Hello guys first all of all just forthe info Allwinner A10 tablet cant be hard bricked! You can always flash a livesuit.img and restore your tab back! We dont have the original liveusit.img of the tab but i manage to get back on stock with few steps and this method is confirmed and tested!!
Requirements -
ADB Drivers ( http://www.4shared.com/rar/NY7NE6wm/ADB_Drivers.html )
USB Mouse
Little Brain
Note : If you have CWM installed onyur tab you can simply Restore from your restored backup if you dont have one here it is
http://www.4shared.com/rar/t3ycEEpk/2012-09-25114926.html
Step 1 : - Download the software called Livesuit you can easily google it and find it but here's treat for you!
http://www.yarvik.com/userfiles/yarvikfirmware/YarvikLiveSuit.zip
Step 2 : - Download this image http://www.yarvik.com/userfiles/yarvikfirmware/TAB461EUK_A404.img
Step 3 : - Extract Livesuit software and open Livesuit.exe -- > Whataver pop-ups come just click no! -- > Click on select image and browse to the downloaded TAB461 .img and leave the software as it is
Step 4 : - Now connect your tablet ( make sure it is turned off not in recovery or something , you can do this by holding power button for long ) to the pc/laptop by holding back button! as soon as you attach usb , while holding back button press 'power' button 10 times repeatedly!
Wait and a pop up will come Click 'YES' 2 times it will take 2 mins to flash the image and u will soon boot up!
Step 5 :- Touch wont work on this image! So connect your wired mouse with OTG cable and install CWM and then the backup! as described below
http://www.facebook.com/l.php?u=http%3A%2F%2Fforum.xda-developers.com%2Fshowthread.php%3Ft%3D1906247&h=xAQG1BrKz
If having any problem comment below! i will solve it!
If u like my work....just hit THANKS
Click to expand...
Click to collapse
Excuse me for asking big thing, but can you make a IMG file from your (or anyone) working funbookPro.
The livesuit wiped something related to wifi while using Yarvik image file. Since then the wifi isn't working. I managed to turn it on using some other Stock firmwares but its not able to get the IP address. ( tried http://www.curtisint.com/html/CustService/Manuals/PRO_PLT1044_FIRMWARE.ZIP, http://smartpad.mediacomeurope.it/Prodotti/Download.aspx?XRC=M-MP1010I and many other stock firmwares). Unless the source stock firmware is flashed seems the wifi is not going to work. Even the backup provided by you is unable to bring back the wifi. funbookpro is using some wifi chip which isn't present in most of the tablets. I've been struggling to get it back from few days. downloaded many Gigs still no luk
Thanks in advance.
---------- Post added at 02:04 PM ---------- Previous post was at 01:56 PM ----------
oh btw anyone who bricked their funbookpro can use the following firmwares with livesuit till we get an official firmware
Most of the firmwares wipe out the internal SD card. use only if u dont care about internal SD or if it is being shown as damaged.
The following are the images that worked for me..
http://www.kocaso.com/firmware/M1062_01.exe
http://www.curtisint.com/html/CustService/Manuals/PRO_PLT1044_FIRMWARE.ZIP
http://smartpad.mediacomeurope.it/Prodotti/Download.aspx?XRC=M-MP1010I
http://www.mediacomeurope.it/ZeusInc/PressRoom/Documents/1010i.zip
http://smartpad.mediacomeurope.it/Prodotti/Download.aspx?XRC=M-MP1010I
Some have problem while restoring the backup given by Gautam.

FunBook Pro similar firmware with other 3g dongles working (try this only on bricked)
M1062_01.exe This firmware is working great. I've tried couple of 3G dongles they are working fine. Screw photon + :laugh:
The downside is unable to use other updates like PowerTab_JB_V2_by_Joby. It just freezes at cyanogenmod logo. Oh yeah!!! it wipes out the Internal SD card as well. Still the firmware isn't a perfect match.

Touch screen not working
After unbricking, touch is not working, any ideas? Thanks

naneraja said:
After unbricking, touch is not working, any ideas? Thanks
Click to expand...
Click to collapse
Follow the step5 from the main post by cool.gautam

matrixbluestar said:
Follow the step5 from the main post by cool.gautam
Click to expand...
Click to collapse
Works now after reinstalling the backup. Thanks for the help

micromax p500
i have installed cwm recovery but nothing works in it no button works except power button and mouse is also not working and touch is also not working
please help.................

[Q] Goophone i9 Help

I am with ATT and i have had the IMEI registered with them for the phone. I verified the APN but when i connect with ATT it lets me on the 3g network for about 1 minute then drops me completely. I have read hear to use the fix for the ZP0810 so i got the tools and i have the connection the problem comes from when i am following the directions. I cant get it to ever enter the root mode. It says i have root access but all it does is sit the goophone splash screen. the tools i am using come from this spot (http://forum.xda-developers.com/showthread.php?t=2174075) but the database came from another section on here.
I know i am not being very descriptive but i am not a developer and I am more upset about the phone not working it was a present for the wife and it has been a nightmare for me. so any help you can give me would be great.
If i have to buy a new ROM for it i will. I would just need better instructions Tools, Steps and verifications required on my part. I am a mechanic and i know hammers and saws better then ROM's
I appreciate it all in advance if you need more info or pictures or what i am using right now please let me know.

update i have tried the tools given researched them and all but when i go to do the update using the attachement that i have attached and followed the youtube example but i am stuck and truly need some help. I got the tools to run but when i set the tool to connect to smartphone in meta then remove the battery and reinstall and click reconnect i get nothing but the Goophone splash it doesnt progress any further. I have been doing this now for 2 weeks total and have read extensively about how to do it and i feel confident i can do it now if i can figure out what is going on with not going past the splash screen.
I am using window 7 64 bit and i have to run the tools as windows xp sp3 in order to not get a mem error. So any suggestions would be helpful thank you
this is the step that is stopping me from applying the fix
"Then remove the mobile phone battery and reinstall ,click to Reconnect,charger mobile phone through link
to the USB"

hi,
can your phone actually bootup now?
have you tried reflash to diff rom?
i am not in us, so no idea, but reflashing is not difficult. i brick my phone in less than a day and recover it within few hours of reading as well.

Try flashtools

[Q] help me to fix my bricked MT6589 HTC ONE clone

Please help me to fix my MT6589 HTC ONE clone. I factory reset my mobile. Then wipe cache using cwm. then restart. now its totally bricked. its not even charging. can't on. no light. no vibration. no recovery mode. even pc cant recognize the device. please help me to fix it. i just bought it. only a week.

I have the exact same problem, except my PC still recognizes it, I can't do anything else.
I'm not even able to make MTK tools nor SPFT recognize my phone...
A bit of help would grandly be appreciated :fingers-crossed:
Regards.

did you find an answer
dhcj said:
Please help me to fix my MT6589 HTC ONE clone. I factory reset my mobile. Then wipe cache using cwm. then restart. now its totally bricked. its not even charging. can't on. no light. no vibration. no recovery mode. even pc cant recognize the device. please help me to fix it. i just bought it. only a week.
Click to expand...
Click to collapse
I saw on another forum that you solved your problem. Could you tell me how you did it?

fixed it.
boulabloubla said:
I saw on another forum that you solved your problem. Could you tell me how you did it?
Click to expand...
Click to collapse
Hi everyone.
sorry for late reply.
I used this rom.
download from here.
pan.baidu.com/share/link?shareid=519096060&uk=1966208364
try it. if its not working I will explain step by step how i did it.
:good:

Sorry I couldn't answer earlier, I was kinda busy.
Thank you for your help, I'll try it and get back at you right away.
Cheers.

So, I tried the ROM, but it doesn't work, it gives me a message like Error DRAM (4032).
Could you explain me a little more please?
Thank you

boulabloubla said:
So, I tried the ROM, but it doesn't work, it gives me a message like Error DRAM (4032).
Could you explain me a little more please?
Thank you
Click to expand...
Click to collapse
can you sent me a picture of your mobile. i want to check is it same as mine.

Here they are.

step by step
boulabloubla said:
Here they are.
Click to expand...
Click to collapse
Okay. its exactly same as mine.
go to this link and download the .rar file.
dropbox.com/s/066vyfzgxe5b5fa/MT6577_root_tools_pack.rar
1.
there is a pdf file. read the pdf file carefully and follow the Step 1 only. (USB Drivers Installation) make sure you have install the drivers correctly.
download the original ROM.
dropbox.com/s/8kv93irrp8o8cpm/one%20english.rar
2.
Unplug the phone. open the folder named "SP_Flash_Tool" from the MT6577_root_tools_pack.
open "Flash_tool.exe" go to option selec "USB mode".
Select the scatter file from the original ROM. (second link)
SP_Flash_Tool -> Flash_tool.exe -> Scatter-loading -> MT6589_Android_scatter_emmc.txt
Then click "Format"
Format -> Automatic format flash -> Format whole flash except bootloader -> OK
then connect the switch offed phone. (it will automatically format the phone.)
After its done disconnect the phone.
close the SP_flash_tool.
3.
Unplug the phone. open the folder named "SP_Flash_Tool" from the first download.
open "Flash_tool.exe" go to option selec "USB mode".
Select the scatter file from the original ROM. (second link)
SP_Flash_Tool -> Flash_tool.exe -> Scatter-loading -> MT6589_Android_scatter_emmc.txt
then click " Firmware upgrade"
then connect the switch offed phone. (it will automatically upload the files to phone.)
it will take few minutes. then unplug the phone.
now try to switch on!
hope it will work for you.
good luck
:good:

Thanks for the help.
I did not entirely followed what you had, but I was able to flash the ROM you gave, thank you again good sir :laugh:, and I hope it will be useful for someone else.
Good day! :good:

boulabloubla said:
Thanks for the help.
I did not entirely followed what you had, but I was able to flash the ROM you gave, thank you again good sir :laugh:, and I hope it will be useful for someone else.
Good day! :good:
Click to expand...
Click to collapse
can you use your phone now?

Hello everyone, I have a problem with a htc one of my friend. the phone has no operating system, no longer appears when you turn on anything. how can I do to flash boot, recovery, and all the rest?
the phone will not turn off, you have to wait for it drains the battery.
I apologize for my English
thanks

Bricked HTC one clone MT6589
Hello everybody!
I have the same issue my HTC One clone MT6489 does not work since I flashed the boot image (I know...).
I have followed all the steps mentionned above and my screen stays back when I reboot.
Maybe I misse sonething.
Anybody can help?
D.

Reboot loop
To be more precise, any boot image or wahtever I put, I have a reboot loop...

sir i have a hard time following the concern , after choosing the scatter "MT6589_Android_scatter_emmc.txt" then try to press the download button it seems download not starting. can you help me with this sir?
after of a purple loading its stock from 0% loading, and no yellow loading.