my one s stick in boot loop after flash superboot - HTC One S

after i get my htc one s i unlock it using htc development site and after that i use the superboot tool to install a custom ROM but i stuck into a boot loop, and a message under htc logo written in red " this build is for development purposes only" , i still can go into boot-loader and recovery, but no SD can be mount in recovery.
i use different RUU ROM and no one can solve the problem,
HBoot V 1.13 and radio 0.17
and my operator is orange
could any one helps me please????

Flash a ROM in recovery, then flash it's boot.img in fastboot
HTC_One_S | S-OFF | ViperOneS_2.2.0 | Black-Blue_Sense_Theme | ElementalX_4.2

thanks my friend for reply;
i cannot mount my device memory fo insert rom in it;
and could you please send a link for an rom to download...

Pick one:
http://forum.xda-developers.com/showthread.php?p=40527313
HTC_One_S | S-OFF | ViperOneS_2.2.0 | Black-Blue_Sense_Theme | ElementalX_4.2

Related

[Q] HTC One S unable to flash anything

Hello everyone,
This evening I was tired of CM 10 not working properly anymore (play store kept crashing etc.), so i decided that i wanted a new ROM. I chose Viper S 2.2 and there was the point where everything went wrong.
I used to own a HTC Desire with which flashing was very easy, but with the One S I kept seeing that i had to flash a boot.img or something, i hate the SDK so i skipped it. The Viper ROM went OK until after the reboot after the Arosa installer.
It is now stuck at the splash screen and when i try to reflash anything it just gives me a red "Failed" message, with it saying that the zip could not be opened..
I then tried to go extreme and unroot it bij using the RUU but this keeps giving me the 107 error of it not being connected.. It doesnt work in HBOOT or in the splash screen.
Here is the bootloader info:
*** TAMPERED ***
*** UNLOCKED ***
VLE PVT SHIP S-ON RL
HBOOT-1.09.0000
RADIO-0.16.31501S.17_2
OpenDSP-v25. 1.0.32.0405
eMMC-boot
and on top of that, in the proces my whole SD-Card was wiped (internal storage)
Anyone any idea what to do? I'm desperate..
Well...all you had to do was flash the boot.img...you can't just skip things that's why it wouldn't boot...no boot.img hence the name..make sense?
HTC_One_S | S-OFF | ViperOneS_2.2.0 | Black-Blue_Sense_Theme | ElementalX_3.4
ryanshew said:
Well...all you had to do was flash the boot.img...you can't just skip things that's why it wouldn't boot...no boot.img hence the name..make sense?
HTC_One_S | S-OFF | ViperOneS_2.2.0 | Black-Blue_Sense_Theme | ElementalX_3.4
Click to expand...
Click to collapse
Well.. the problem already occured when i tried to reflash CM10 ... I know that not flashing the boot image was not my brightest move ever, the problem of not being able to flash anything already occured before even knowing about the thing..
Have you tried flashing a different recovery? Try clock work mod or 2.3.3 of twrp
HTC_One_S | S-OFF | ViperOneS_2.2.0 | Black-Blue_Sense_Theme | ElementalX_3.4
ryanshew said:
Have you tried flashing a different recovery? Try clock work mod or 2.3.3 of twrp
HTC_One_S | S-OFF | ViperOneS_2.2.0 | Black-Blue_Sense_Theme | ElementalX_3.4
Click to expand...
Click to collapse
I am currently on twrp 2.4, i will flash CWM for now and let you know how it goes.
Oh your 2.44 there's your problem. I'm on the latest 2.4.4.0 as well For the OTG support, but If I run into any problems I just immediately flash CWM.
HTC_One_S | S-OFF | ViperOneS_2.2.0 | Black-Blue_Sense_Theme | ElementalX_3.4
ryanshew said:
Oh your 2.44 there's your problem. I'm on the latest 2.4.4.0 as well For the OTG support, but If I run into any problems I just immediately flash CWM.
HTC_One_S | S-OFF | ViperOneS_2.2.0 | Black-Blue_Sense_Theme | ElementalX_3.4
Click to expand...
Click to collapse
just flash a new kernel, also my tool flashes .zip files, maybe you should try it, link is in my signature! hope it works!
Nope.. not working, flashed a new custom kernel, CWM, boot.img .. Everything looks fine when installing but when I boot up it keeps getting stuck on the splash screen..
OMG. I don't know why, but it suddenly works.. I threw a CM10 EXPERIMENTAL on my sd and it's booting.. Still not sure on how to flash the Viper though now... Thanks anyway everyone.
cookiejarxxl said:
Still not sure on how to flash the Viper though now...
Click to expand...
Click to collapse
reboot into bootloader -> fastboot
fastboot flash the boot image from the 2.1 rom
reboot into recovery
wipe system, data, cache
flash the 2.1 rom without wiping in aroma
reboot into android
let it sit for a minute or so before unlocking
in the setup, you have to choose your carrier and language. you can skip everything else
reboot into recovery
flash the 2.2 ota
reboot into android
let it sit for a minute or so before unlocking
personalize -> skin or scene, de-select and re-select the default skin
let it sit for another couple minutes
reboot
do your accounts, apps, tweaks, settings, etc..
touch of jobo said:
reboot into bootloader -> fastboot
fastboot flash the boot image from the 2.1 rom
reboot into recovery
wipe system, data, cache
flash the 2.1 rom without wiping in aroma
reboot into android
let it sit for a minute or so before unlocking
in the setup, you have to choose your carrier and language. you can skip everything else
reboot into recovery
flash the 2.2 ota
reboot into android
let it sit for a minute or so before unlocking
personalize -> skin or scene, de-select and re-select the default skin
let it sit for another couple minutes
reboot
do your accounts, apps, tweaks, settings, etc..
Click to expand...
Click to collapse
Thanks alot, I did find that the file keeps giving me a wrong MD5.. I guess it's corrupt, i have downloaded it a million times..
cookiejarxxl said:
Thanks alot, I did find that the file keeps giving me a wrong MD5.. I guess it's corrupt, i have downloaded it a million times..
Click to expand...
Click to collapse
If your recovery complains about signatures on the ota, try toggling signature verification off.

Fixing helicopter issue

Hi,
I'm running ViperOneS 2.2.0 (Android 4.1.1) and still having the helicopter-glitch. So I contacted HTC support and they told me I should backup all my data and do a hardreset. Will my phone be OK after running the hardreset? Because of custom ROM? I've unlocked via HTCDev and I'm running CWM recovery. Do you think this will fix the issue? Sending it in for repair could end up expensive, because of unlock. Or are there any other ideas for fixing it?
Greets
Sorry I didn't use the helicopter-thread but this does not directly concern the issue itself...
no proper fix till now! we are stuck with it
Seriously HTC!? -.-
Chances for a fix with hardreset? none?
TerrorApple said:
Seriously HTC!? -.-
Chances for a fix with hardreset? none?
Click to expand...
Click to collapse
Doubt it. You could try running an ruu, but other than that...???
HTC_One_S | S-OFF | ViperOneS_2.2.0 | Black-Blue_Sense_Theme | ElementalX_4.2
But whats the difference between RUU with Android 4.1.1 and ViperOneS also running 4.1.1? HTC said the fix was added in Jelly Bean?
RUU , will flash new versions of bootloader , radio etc . The rom is just the system partition , I recommend you to RUU the device then restore your ViperROM
Ruu is like a fresh wipe/reset/clean. Wipe everything and re flash all partitions.
HTC_One_S | S-OFF | ViperOneS_2.2.0 | Black-Blue_Sense_Theme | ElementalX_4.2
Ok thanks, I'll give that a try. Can someone please post how I exactly do that? First time to flash RUU... Found this: http://androidforums.com/one-s-all-things-root/691874-guide-how-run-ruu-your-htc-one-s.html Will that work? And where can I get the RUU I need? It says I should go S-OFF to use any one I want... My phone came with german T-Mobile ROM. And using CWM isn't a problem, right?

Trying to go back to stock.Help needed

Hi..i am using Htc One S Villec2.I want to go back to stock.I relocked my bootloader and flash ota.zip.But when i try to reboot,my fone reboots into bootloader.What m i doing wrong?I cant find a jellybean ruu too for india so i can relock bootloader and apply ruu..Please help.
Did you flash stock recovery before you relocked? Is it the ota from your provider? Make sure it's named update.zip.
HTC_One_S | S-OFF | DeviantXone_2.0 | Twisted_III
ryanshew said:
Did you flash stock recovery before you relocked? Is it the ota from your provider? Make sure it's named update.zip.
HTC_One_S | S-OFF | DeviantXone_2.0 | Twisted_III
Click to expand...
Click to collapse
Can you say where I can find stock recovery for One S Villec2?
I tried flashing with stock recovery too..Yes its from my provider..I think that the ota.zip is with the ruu..Because its 603 mb sumthing.And i am flashing it in bootloader mode but still..It reboots into bootloader mode after flashing the zip
androidfreak16 said:
I tried flashing with stock recovery too..Yes its from my provider..I think that the ota.zip is with the ruu..Because its 603 mb sumthing.And i am flashing it in bootloader mode but still..It reboots into bootloader mode after flashing the zip
Click to expand...
Click to collapse
The update.zip gets flashed in stock recovery with stock ROM installed. Not sure if you can just pull from ruu though.
HTC_One_S | S-OFF | DeviantXone_2.0 | Twisted_III
ok..moreover can u help me with my browser issue.I am having the same problems with all browsers i download.I cant connect to Adf.bit blah blah..sites when i want to download apk.It says webpage not availbile.

Can't SuperCID

I'm trying to supercid with the mc..04MOD method and i have already done it in my phone and now i'm trying on my brother's phoe and i stay on the same CID (HTC__K18 / Israel)
Device Stats:
Jelly Bean 4.1.1
HBoot 2.15
Bootloader Unlocked
Fully Rooted with TWRP
please help me i need to know what to do cause i wanna s-off my device and i have to have supercid which i can't achieve and i don't know why cause i followed the guide and i stay on the same CID (HTC__K18)
You probably ended up taking the update with write protection on the 0p4 partition. Lots of reports of people who cannot super cid, therefore cannot s-off.
HTC_One_S | S-OFF | ViperOneS_2.2.0 | Black-Blue_Sense_Theme | Bulletproof_1.3
ryanshew said:
You probably ended up taking the update with write protection on the 0p4 partition. Lots of reports of people who cannot super cid, therefore cannot s-off.
HTC_One_S | S-OFF | ViperOneS_2.2.0 | Black-Blue_Sense_Theme | Bulletproof_1.3
Click to expand...
Click to collapse
Is there a way to remove write protection?
LSGio said:
Is there a way to remove write protection?
Click to expand...
Click to collapse
Not for this.
HTC_One_S | S-OFF | ViperOneS_2.2.0 | Black-Blue_Sense_Theme | Bulletproof_1.3

Can't flash Sense Roms

I need help, I'm new to the One S and idk why I can't flash Sense roms.
I'm supercid'd, and s-off
First, I tried flashing Viper ROM 2.1.0, it went through aroma installer and looked well, but it never past the boot screen.
Second, I tried trickdroid 9.0.0, I got a status 8 error on twrp 2.5.0.0, so I checked and the md5 did match.
Third, I tried mk's stock sense rom, and it repeated just like trickdroid, and md5 did match.
None of these problems happen with aosp. I'm using it atm, but I wanna use sense.
Thanks!
Sent from my One S
This is a known issue with twrp 2.5. Use clock work mod or twrp 2.2.2 or 2.3.3.
HTC_One_S | S-OFF | ViperOneS_2.2.0 | Black&Blue_Inverted_Sense | Bulletproof_1.4
Inverted Sense _4+_and_5_click me
ryanshew said:
This is a known issue with twrp 2.5. Use clock work mod or twrp 2.2.2 or 2.3.3.
HTC_One_S | S-OFF | ViperOneS_2.2.0 | Black&Blue_Inverted_Sense | Bulletproof_1.4
Inverted Sense _4+_and_5_click me
Click to expand...
Click to collapse
Thanks a lot! I was starting to think it was the recovery, I've always used twrp in all my devices without a single problem till now. Thanks again!
Sent from my One S

Categories

Resources