[Q] How to reduce ROM size ?? - HTC Pico (Explorer)

I am porting paranoid android 3.0 for pico
after all porting work the unpacked rom size is 269 MB
i somewhere raid that unpacked rom size should be less that 235 MB
so what can i do to reduce the size ??

The1sameer said:
I am porting paranoid android 3.0 for pico
after all porting work the unpacked rom size is 269 MB
i somewhere raid that unpacked rom size should be less that 235 MB
so what can i do to reduce the size ??
Click to expand...
Click to collapse
Okay. Do these.
- Delete audio files from /system/Media
- Delete live wallpapers in /system/app like " NoiseField.apk , Galaxy.apk "
- Delete unused apks from /system/app like Email.apk,Quicksearchbox.apk,
- If the symlinks error still persist just delete some more apks and install the ROM. After that you can add apks
Hit thanks if this worked

Also, you can add a memory increasing script by default, and make some changes to ROM to install some of apks in the /data partition
Sent from my HTC Explorer A310e using xda app-developers app

Annoying Bee said:
Okay. Do these.
- Delete audio files from /system/Media
- Delete live wallpapers in /system/app like " NoiseField.apk , Galaxy.apk "
- Delete unused apks from /system/app like Email.apk,Quicksearchbox.apk,
- If the symlinks error still persist just delete some more apks and install the ROM. After that you can add apks
Hit thanks if this worked
Click to expand...
Click to collapse
i am getting following log on compiling the rom on sdk emulator
Code:
C:\Program Files (x86)\Android\android-sdk\tools>emulator -show-kernel -avd pac3
C:\Program Files (x86)\Android\android-sdk\tools>WARNING: Data partition already
in use. Changes will not persist!
WARNING: SD Card image already in use: C:\Users\Sameer\.android\avd\pac3.avd/sdc
ard.img
WARNING: Cache partition already in use. Changes will not persist!
serial0 console
Uncompressing Linux.............................................................
.......................................... done, booting the kernel.
Initializing cgroup subsys cpu
Linux version 2.6.29-gea477bb ([email protected]) (gcc version
4.6.x-google 20120106 (prerelease) (GCC) ) #1 Wed Sep 26 11:04:45 PDT 2012
CPU: ARMv7 Processor [410fc080] revision 0 (ARMv7), cr=10c5387f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: Goldfish
Memory policy: ECC disabled, Data cache writeback
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
Kernel command line: qemu.gles=0 qemu=1 console=ttyS0 android.qemud=ttyS1 androi
d.checkjni=1 ndns=2
Unknown boot option `qemu.gles=0': ignoring
Unknown boot option `android.qemud=ttyS1': ignoring
Unknown boot option `android.checkjni=1': ignoring
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 512MB = 512MB total
Memory: 515584KB available (2900K code, 707K data, 124K init)
Calibrating delay loop... 117.96 BogoMIPS (lpj=589824)
Mount-cache hash table entries: 512
Initializing cgroup subsys debug
Initializing cgroup subsys cpuacct
Initializing cgroup subsys freezer
CPU: Testing write buffer coherency: ok
net_namespace: 936 bytes
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
NET: Registered protocol family 2
IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 176K
goldfish_new_pdev goldfish_interrupt_controller at ff000000 irq -1
goldfish_new_pdev goldfish_device_bus at ff001000 irq 1
goldfish_new_pdev goldfish_timer at ff003000 irq 3
goldfish_new_pdev goldfish_rtc at ff010000 irq 10
goldfish_new_pdev goldfish_tty at ff002000 irq 4
goldfish_new_pdev goldfish_tty at ff011000 irq 11
goldfish_new_pdev goldfish_tty at ff012000 irq 12
goldfish_new_pdev smc91x at ff013000 irq 13
goldfish_new_pdev goldfish_fb at ff014000 irq 14
goldfish_new_pdev goldfish_audio at ff004000 irq 15
goldfish_new_pdev goldfish_memlog at ff006000 irq -1
goldfish_new_pdev goldfish-battery at ff015000 irq 16
goldfish_new_pdev goldfish_events at ff016000 irq 17
goldfish_new_pdev goldfish_nand at ff017000 irq -1
goldfish_new_pdev qemu_pipe at ff018000 irq 18
goldfish_new_pdev goldfish-switch at ff01a000 irq 19
goldfish_new_pdev goldfish-switch at ff01b000 irq 20
goldfish_pdev_worker registered goldfish_interrupt_controller
goldfish_pdev_worker registered goldfish_device_bus
goldfish_pdev_worker registered goldfish_timer
goldfish_pdev_worker registered goldfish_rtc
goldfish_pdev_worker registered goldfish_tty
goldfish_pdev_worker registered goldfish_tty
goldfish_pdev_worker registered goldfish_tty
goldfish_pdev_worker registered smc91x
goldfish_pdev_worker registered goldfish_fb
goldfish_pdev_worker registered goldfish_audio
goldfish_pdev_worker registered goldfish_memlog
goldfish_pdev_worker registered goldfish-battery
goldfish_pdev_worker registered goldfish_events
goldfish_pdev_worker registered goldfish_nand
goldfish_pdev_worker registered qemu_pipe
goldfish_pdev_worker registered goldfish-switch
goldfish_pdev_worker registered goldfish-switch
ashmem: initialized
Installing knfsd (copyright (C) 1996 [email protected]).
yaffs Sep 26 2012 11:04:43 Installing.
msgmni has been set to 1007
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
allocating frame buffer 320 * 480, got ffa00000
console [ttyS0] enabled
brd: module loaded
loop: module loaded
nbd: registered device at major 43
goldfish_audio_probe
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
smc91x.c: v1.1, sep 22 2004 by Nicolas Pitre <[email protected]>
eth0 (smc91x): not using net_device_ops yet
eth0: SMC91C11xFD (rev 1) at e080c000 IRQ 13 [nowait]
eth0: Ethernet addr: 52:54:00:12:34:56
goldfish nand dev0: size c200000, page 2048, extra 64, erase 131072
goldfish nand dev1: size 12300000, page 2048, extra 64, erase 131072
goldfish nand dev2: size 4000000, page 2048, extra 64, erase 131072
mice: PS/2 mouse device common for all mice
*** events probe ***
events_probe() addr=0xe0814000 irq=17
events_probe() keymap=qwerty2
input: qwerty2 as /devices/virtual/input/input0
goldfish_rtc goldfish_rtc: rtc core: registered goldfish_rtc as rtc0
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: [email protected]
logger: created 64K log 'log_main'
logger: created 256K log 'log_events'
logger: created 64K log 'log_radio'
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ctnetlink v0.93: registering with nfnetlink.
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
xt_time: kernel timezone is -0000
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 15
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
All bugs added by David S. Miller <[email protected]>
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 0
goldfish_rtc goldfish_rtc: setting system clock to 2013-04-22 17:49:50 UTC (1366
652990)
Freeing init memory: 124K
init: cannot open '/initlogo.rle'
yaffs: dev is 32505856 name is "mtdblock0"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.0, "mtdblock0"
yaffs: dev is 32505857 name is "mtdblock1"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.1, "mtdblock1"
yaffs_read_super: isCheckpointed 0
yaffs: dev is 32505858 name is "mtdblock2"
yaffs: passed flags ""
yaffs: Attempting MTD mount on 31.2, "mtdblock2"
yaffs_read_super: isCheckpointed 0
init: cannot find '/system/bin/servicemanager', disabling 'servicemanager'
init: cannot find '/system/bin/vold', disabling 'vold'
init: cannot find '/system/bin/qemu-props', disabling 'qemu-props'
init: cannot find '/system/bin/netd', disabling 'netd'
init: cannot find '/system/bin/debuggerd', disabling 'debuggerd'
init: cannot find '/system/bin/rild', disabling 'ril-daemon'
init: cannot find '/system/bin/surfaceflinger', disabling 'surfaceflinger'
init: cannot find '/system/bin/app_process', disabling 'zygote'
init: cannot find '/system/bin/drmserver', disabling 'drm'
init: cannot find '/system/bin/mediaserver', disabling 'media'
init: cannot find '/system/bin/installd', disabling 'installd'
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
init: cannot find '/system/bin/keystore', disabling 'keystore'
init: cannot find '/system/bin/qemud', disabling 'qemud'
init: cannot find '/system/bin/logcat', disabling 'goldfish-logcat'
init: cannot find '/system/etc/init.goldfish.sh', disabling 'goldfish-setup'
init: cannot find '/system/bin/sh', disabling 'console'

thewisenerd said:
Also, you can add a memory increasing script by default, and make some changes to ROM to install some of apks in the /data partition
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
Which Script, How to Add and where to add these scripts,,, Describe in details...

Related

Lack of a Feature Complete Kernel for 32A Magic for AOSP Gingerbread [FIXED SOD?]

I don't have the skills to complete to solve this problem, but I thought I would put this together for any developers to look at.
Currently for 32A (Rogers) Magics, there isn't a custom kernel out there that I would consider 'perfected'.
1) SebastianFM/Carz12 2.6.32 kernel
* deep-sleep lock up bug, most obvious when airplane mode is turned on
2) Flykernel 2.6.29 kernel
* bluetooth pairs, but file transfer and other functionality fails
3) Old radio kernels (AOSP line)
I experience a high occurrence of random reboots going with new builds of old radio kernels. For some reason, the Magic can't be clocked as high as from HTC based kernels (1, 2).
There is another Hero kernel we could try porting which should share our radio stack:
http://forum.xda-developers.com/showthread.php?t=765701
But I am not confident in the quality of our compatible board files for the 2.6.3x kernel, since the Magic's last official HTC kernel shipped with the 2.6.29 board files that I ported into Flykernel.
Edit:
Sleep of death on carz kernel seems to be fixed!
http://forum.xda-developers.com/showpost.php?p=28687916&postcount=17
I also try to hero-kernel-2635, but touchscreen can't respond, adb ok, USB seem ok.
Those sensors are easy to fix. Just build the appropriate drivers for those. They might be missing from the sources.
Compare the .config
Which source were you able to boot from?
https://github.com/riemervdzee/hero-kernel-2.6.35
get sapphire and qdsp5_comp files from fly 2.6.29, and etc.
I try touchscreen driver from Ezterry biff testing kernel source, but still no response.
biff testing kernel , anaother .35 kernel,boot ok ,but more error……
We already have a 2.6.35 carz Kernel, which is quite good.
Cronnicery has also made his own kernel Cronmod, based on the lastest carz kernel.
So I think we don't need an extra Kernel, perhaps you can build a 3.0 kernel for ICS development.
ziyouwa said:
https://github.com/riemervdzee/hero-kernel-2.6.35
get sapphire and qdsp5_comp files from fly 2.6.29, and etc.
I try touchscreen driver from Ezterry biff testing kernel source, but still no response.
biff testing kernel , anaother .35 kernel,boot ok ,but more error……
Click to expand...
Click to collapse
I don't understand the code. Usually I slap things together and hope for them to work and fix all the compiler reported problems, so I expected the driver to plug and play nice together.
Sounds good that you got the 2.6.35 to boot though.
If we can get a feature complete kernel, we can move together with Hero devs for their ports, be it ICS or whatever, at least for new radio. We already have ROM cooks who do that, but our ROMs are turning out to have the bugs that I mentioned, which sucks
Does someone know if the stock Rogers kernel bluetooth works with AOSP Gingerbread ROMs? Maybe we should just work off that instead of the Hero kernels or the Cyangeonmod kernels.
carz kernel power manager has problem, Cronnicery kernel is 2.6.29, bluetooth is error.
2.6.35 or 2.6.29,very upset.
I get synaptics_i2c_rmi.c .h from ezterry kernel source,and edit board-sapphire.c as it, but... dmesg as below, Pls help me fix touchscreen. :
Code:
<6>[ 0.000000] Initializing cgroup subsys cpu
<5>[ 0.000000] Linux version 2.6.35.14-Las_Venturas-1.2 ([email protected]) (gcc version 4.4.3 (GCC) ) #24 PREEMPT Tue Jul 3 14:24:35 CST 2012
<4>[ 0.000000] CPU: ARMv6-compatible processor [4117b362] revision 2 (ARMv6TEJ), cr=00c5387f
<4>[ 0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
<4>[ 0.000000] Machine: sapphire
<7>[ 0.000000] find the smi tag
<7>[ 0.000000] parse_tag_smi: smi size = 32
<7>[ 0.000000] find the hwid tag
<7>[ 0.000000] parse_tag_hwid: hwid = 0x1
<7>[ 0.000000] find the skuid tag
<7>[ 0.000000] parse_tag_skuid: hwid = 0x21401
<7>[ 0.000000] find the engineer tag
<7>[ 0.000000] parse_tag_engineerid: 0x2
<4>[ 0.000000] sapphire_fixup:bank size=0xc600000
<7>[ 0.000000] find the smi tag
<7>[ 0.000000] parse_tag_smi: smi size = 32
<7>[ 0.000000] find the hwid tag
<7>[ 0.000000] parse_tag_hwid: hwid = 0x1
<7>[ 0.000000] find the skuid tag
<7>[ 0.000000] parse_tag_skuid: hwid = 0x21401
<7>[ 0.000000] tag_panel_parsing: panel type = 0
<7>[ 0.000000] find the engineer tag
<7>[ 0.000000] parse_tag_engineerid: 0x2
<6>[ 0.000000] AKM Data size = 1018 , 0x89768976, size = 4064
<4>[ 0.000000] Ignoring unrecognised tag 0x41387898
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
<7>[ 0.000000] On node 0 totalpages: 53248
<7>[ 0.000000] free_area_init_node: node 0, pgdat c053ec90, node_mem_map c05f8000
<7>[ 0.000000] Normal zone: 464 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 52784 pages, LIFO batch:15
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 52784
<5>[ 0.000000] Kernel command line: board_sapphire.disable_uart3=0 board_sapphire.usb_h2w_sw=0 board_sapphire.disable_sdcard=0 smisize=32 androidboot.baseband=6.35.16.19 androidboot.cid=TIM__401 androidboot.carrier=TIM-Italy androidboot.mid=SAPP10000 androidboot.keycaps=qwerty androidboot.mode=normal androidboot.serialno=HT961KF11026 androidboot.bootloader=1.76.2007 no_console_suspend=1 console=null
<6>[ 0.000000] board_bootloader_setup: 1.76.2007
<6>[ 0.000000] board_bootloader_setup: default ENG BUILD
<6>[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>[ 0.000000] Memory: 198MB 10MB = 208MB total
<5>[ 0.000000] Memory: 204852k/204852k available, 8140k reserved, 0K highmem
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[ 0.000000] DMA : 0xffa00000 - 0xffe00000 ( 4 MB)
<5>[ 0.000000] vmalloc : 0xcf000000 - 0xf8000000 ( 656 MB)
<5>[ 0.000000] lowmem : 0xc0000000 - 0xce800000 ( 232 MB)
<5>[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
<5>[ 0.000000] .init : 0xc0008000 - 0xc0029000 ( 132 kB)
<5>[ 0.000000] .text : 0xc0029000 - 0xc0509000 (4992 kB)
<5>[ 0.000000] .data : 0xc050a000 - 0xc053f2a0 ( 213 kB)
<6>[ 0.000000] NR_IRQS:266
<7>[ 0.000000] sapphire_init_irq()
<6>[ 0.000000] Calibrating delay loop... 478.41 BogoMIPS (lpj=2392064)
<6>[ 0.250061] pid_max: default: 32768 minimum: 301
<4>[ 0.250518] Mount-cache hash table entries: 512
<6>[ 0.251281] Initializing cgroup subsys ns
<6>[ 0.251342] Initializing cgroup subsys cpuacct
<6>[ 0.251373] Initializing cgroup subsys freezer
<6>[ 0.251373] Initializing cgroup subsys net_cls
<6>[ 0.251403] Initializing cgroup subsys timer_slack
<6>[ 0.251464] CPU: Testing write buffer coherency: ok
<6>[ 0.255493] NET: Registered protocol family 16
<3>[ 0.255645] gpiochip_add: gpios 513..513 (generic) failed to register
<4>[ 0.255676] Trying to install chained interrupt handler for IRQ81
<4>[ 1.325592] is_sapphire_gpiov20=0
<4>[ 1.326385] sapphire_is_5M_camera=0
<6>[ 1.426361] acpu_clock_init()
<6>[ 1.427337] ACPU running at 480000 KHz
<6>[ 1.428100] ram_console: got buffer at 7a0000, size 20000
<6>[ 1.428466] ram_console: found existing buffer, size 47566, start 47566
<6>[ 1.783752] console [ram-1] enabled
<4>[ 1.787200] is_sapphire_gpiov20=0
<4>[ 1.787475] ------------[ cut here ]------------
<4>[ 1.787811] WARNING: at /work/android/kernel/sapphire-kernel-2.6.35.orig/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x54/0x10c()
<4>[ 1.788574] autorequest GPIO-1
<4>[ 1.789031] Modules linked in:
<4>[ 1.789550] Backtrace:
<4>[ 1.790161] [<c002d6f4>] (dump_backtrace+0x0/0x114) from [<c03f8e14>] (dump_stack+0x18/0x1c)
<4>[ 1.790649] r7:00000009 r6:00000067 r5:c01f8ad4 r4:ce217f18
<4>[ 1.791961] [<c03f8dfc>] (dump_stack+0x0/0x1c) from [<c00640f4>] (warn_slowpath_common+0x54/0x6c)
<4>[ 1.792480] [<c00640a0>] (warn_slowpath_common+0x0/0x6c) from [<c00641b0>] (warn_slowpath_fmt+0x38/0x40)
<4>[ 1.792968] r9:00000000 r8:00000000 r7:00000000 r6:00000001 r5:c051d64c
<4>[ 1.794464] r4:c056eb08
<4>[ 1.795257] [<c0064178>] (warn_slowpath_fmt+0x0/0x40) from [<c01f8ad4>] (gpio_ensure_requested+0x54/0x10c)
<4>[ 1.795745] r3:00000001 r2:c04bc314
<4>[ 1.796539] [<c01f8a80>] (gpio_ensure_requested+0x0/0x10c) from [<c01f8d40>] (gpio_direction_output+0x84/0x16c)
<4>[ 1.797058] r7:00000001 r6:60000013 r5:c056eb08 r4:c051d64c
<4>[ 1.798370] [<c01f8cbc>] (gpio_direction_output+0x0/0x16c) from [<c000e420>] (sapphire_init+0x17c/0x1c4)
<4>[ 1.798889] [<c000e2a4>] (sapphire_init+0x0/0x1c4) from [<c000a7a8>] (customize_machine+0x20/0x2c)
<4>[ 1.799407] r5:c0025400 r4:c000a788
<4>[ 1.800170] [<c000a788>] (customize_machine+0x0/0x2c) from [<c00293bc>] (do_one_initcall+0x64/0x1c0)
<4>[ 1.800689] [<c0029358>] (do_one_initcall+0x0/0x1c0) from [<c0008488>] (kernel_init+0xb4/0x170)
<4>[ 1.801208] r9:00000000 r8:00000000 r7:00000013 r6:c0067b24 r5:c0025400
<4>[ 1.802490] r4:c0024dfc
<4>[ 1.803527] [<c00083d4>] (kernel_init+0x0/0x170) from [<c0067b24>] (do_exit+0x0/0x6b4)
<4>[ 1.803802] r5:c00083d4 r4:00000000
<4>[ 1.804870] ---[ end trace 1b75b31a2719ed1c ]---
<4>[ 1.817687] bio: create slab <bio-0> at 0
<6>[ 1.819458] msm_i2c_probe
<6>[ 1.820312] msm_i2c_probe: clk_ctl 35d, 100000 Hz
<6>[ 1.823486] Bluetooth: Core ver 2.15
<6>[ 1.823883] NET: Registered protocol family 31
<6>[ 1.824401] Bluetooth: HCI device and connection manager initialized
<6>[ 1.824676] Bluetooth: HCI socket layer initialized
<6>[ 1.825714] Switching to clocksource gp_timer
<6>[ 1.828735] NET: Registered protocol family 2
<6>[ 1.829681] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 1.830963] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
<6>[ 1.832153] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
<6>[ 1.832733] TCP: Hash tables configured (established 8192 bind 8192)
<6>[ 1.833251] TCP reno registered
<6>[ 1.833557] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 1.834075] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 1.834777] NET: Registered protocol family 1
<6>[ 1.836425] RPC: Registered udp transport module.
<6>[ 1.836730] RPC: Registered tcp transport module.
<6>[ 1.837036] RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>[ 1.837799] Unpacking initramfs...
<6>[ 1.868408] Freeing initrd memory: 144K
<6>[ 1.869567] [SMD]smd_init()
<6>[ 1.869842] [SMD]smd_core_init()
<6>[ 1.870117] [SMD]phy addr of smd_info.state=0x1F023D8
<6>[ 1.870758] [SMD]smd_core_init() done
<3>[ 1.871032] msm_init_last_radio_log: could not retrieve SMEM_CLKREGIM_BSP
<3>[ 1.871643] _smem_log_init: no power log or log_idx allocated, smem_log disabled
<6>[ 1.872467] [SMD]smd_alloc_channel() cid=02 size=08192 'SMD_RPCCALL'
<6>[ 1.874084] [SMD]SMD: ch 2 0 -> 1
<6>[ 1.874420] [SMD]smd_alloc_channel() cid=11 size=08192 'SMD_DATA5'
<6>[ 1.875183] [SMD]smd_alloc_channel() cid=12 size=08192 'SMD_DATA6'
<6>[ 1.875640] [SMD]smd_alloc_channel() cid=13 size=08192 'SMD_DATA7'
<6>[ 1.876708] [SMD]smd_alloc_channel() cid=17 size=08192 'SMD_DATA11'
<6>[ 1.877288] [SMD]smd_alloc_channel() cid=38 size=08192 'SMD_DATA5_CNTL'
<6>[ 1.878021] [SMD]smd_alloc_channel() cid=39 size=08192 'SMD_DATA6_CNTL'
<6>[ 1.878479] [SMD]smd_alloc_channel() cid=40 size=08192 'SMD_DATA7_CNTL'
<6>[ 1.879028] [SMD]SMD: ch 2 1 -> 2
<6>[ 1.891967] Acquire 'boot-time' no_halt_lock 60s
<4>[ 1.893218] sapphire_init_panel:machine_is_sapphire=1, machine_arch_type=1729, MACH_TYPE_SAPPHIRE=1729
<7>[ 1.893798] get_smi_size=32
<6>[ 1.895324] [DISP]mdp_probe: initialized
<7>[ 1.896606] Registered led device: lcd-backlight
<3>[ 1.897613] sapphire_rfkill_probe: Could not request gpio: 0
<6>[ 1.904876] RPC_TIME_TOD_SET_APPS_BASES:
<6>[ 1.904876] tick = 438088
<6>[ 1.904907] stamp = 0
<6>[ 1.939300] [BATT] M2A_RPC: cable_update: USB at 863523192 (1970-01-01 00:00:00.863187736 UTC)
<6>[ 1.940124] [BATT] htc_cable_status_update: 0 -> 1
<6>[ 1.940399] [USB] msm_hsusb_set_vbus_state: 1
<6>[ 1.941558] [BATT] A2M_RPC: get_batt_info: batt_id=2, batt_vol=4049, batt_temp=350, batt_current=1, level=100, charging_source=1, charging_enabled=1, full_bat=1340000, over_vchg=0 at 866481312 (1970-01-01 00:00:00.865383453 UTC)
<6>[ 1.944183] H2W: Registering H2W (headset) driver
<6>[ 1.944702] [H2W] Full Speed USB Mode: 0
<6>[ 1.944976] [H2W] HTC Headset Support: 1
<6>[ 1.945251] [H2W] H2W Device Support: 1
<4>[ 1.947814] ------------[ cut here ]------------
<4>[ 1.948181] WARNING: at /work/android/kernel/sapphire-kernel-2.6.35.orig/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x54/0x10c()
<4>[ 1.948944] autorequest GPIO-37
<4>[ 1.949218] Modules linked in:
<4>[ 1.949951] Backtrace:
<4>[ 1.950531] [<c002d6f4>] (dump_backtrace+0x0/0x114) from [<c03f8e14>] (dump_stack+0x18/0x1c)
<4>[ 1.951049] r7:00000009 r6:00000067 r5:c01f8ad4 r4:ce217df8
<4>[ 1.952362] [<c03f8dfc>] (dump_stack+0x0/0x1c) from [<c00640f4>] (warn_slowpath_common+0x54/0x6c)
<4>[ 1.952880] [<c00640a0>] (warn_slowpath_common+0x0/0x6c) from [<c00641b0>] (warn_slowpath_fmt+0x38/0x40)
<4>[ 1.953399] r9:00000000 r8:0000001b r7:00000000 r6:00000025 r5:c051d6e8
<4>[ 1.954681] r4:c056ec28
<4>[ 1.955688] [<c0064178>] (warn_slowpath_fmt+0x0/0x40) from [<c01f8ad4>] (gpio_ensure_requested+0x54/0x10c)
<4>[ 1.955963] r3:00000025 r2:c04bc314
<4>[ 1.956970] [<c01f8a80>] (gpio_ensure_requested+0x0/0x10c) from [<c01f8ea8>] (gpio_direction_input+0x80/0x164)
<4>[ 1.957458] r7:c056ec28 r6:00000015 r5:60000013 r4:c051d6e8
<4>[ 1.958770] [<c01f8e28>] (gpio_direction_input+0x0/0x164) from [<c00575c4>] (h2w_probe+0x5f0/0xc68)
<4>[ 1.959289] r9:00000000 r8:02faf080 r7:00000000 r6:ce278340 r5:c0546a94
<4>[ 1.960784] r4:00000000
<4>[ 1.961578] [<c0056fd4>] (h2w_probe+0x0/0xc68) from [<c022f248>] (platform_drv_probe+0x20/0x24)
<4>[ 1.962097] [<c022f228>] (platform_drv_probe+0x0/0x24) from [<c022e1f8>] (driver_probe_device+0xb0/0x160)
<4>[ 1.962402] [<c022e148>] (driver_probe_device+0x0/0x160) from [<c022e310>] (__driver_attach+0x68/0x8c)
<4>[ 1.962890] r7:00000000 r6:c051d564 r5:c0518fc0 r4:c0518f78
<4>[ 1.964416] [<c022e2a8>] (__driver_attach+0x0/0x8c) from [<c022d9a0>] (bus_for_each_dev+0x54/0x94)
<4>[ 1.964904] r7:00000000 r6:c022e2a8 r5:ce217ef8 r4:c051d564
<4>[ 1.966186] [<c022d94c>] (bus_for_each_dev+0x0/0x94) from [<c022e05c>] (driver_attach+0x20/0x28)
<4>[ 1.966705] r7:00000000 r6:c052eb88 r5:ce33cf00 r4:c051d564
<4>[ 1.968017] [<c022e03c>] (driver_attach+0x0/0x28) from [<c022d268>] (bus_add_driver+0xa8/0x22c)
<4>[ 1.968536] [<c022d1c0>] (bus_add_driver+0x0/0x22c) from [<c022e628>] (driver_register+0xb0/0x140)
<4>[ 1.969055] [<c022e578>] (driver_register+0x0/0x140) from [<c022f6b8>] (platform_driver_register+0x64/0x7c)
<4>[ 1.969543] r9:00000000 r8:00000000 r7:00000013 r6:00000001 r5:c0025400
<4>[ 1.970825] r4:c000f5cc
<4>[ 1.971862] [<c022f654>] (platform_driver_register+0x0/0x7c) from [<c000f5e0>] (h2w_init+0x14/0x1c)
<4>[ 1.972167] [<c000f5cc>] (h2w_init+0x0/0x1c) from [<c00293bc>] (do_one_initcall+0x64/0x1c0)
<4>[ 1.972686] [<c0029358>] (do_one_initcall+0x0/0x1c0) from [<c0008488>] (kernel_init+0xb4/0x170)
<4>[ 1.973175] r9:00000000 r8:00000000 r7:00000013 r6:c0067b24 r5:c0025400
<4>[ 1.974456] r4:c0024f48
<4>[ 1.975463] [<c00083d4>] (kernel_init+0x0/0x170) from [<c0067b24>] (do_exit+0x0/0x6b4)
<4>[ 1.975738] r5:c00083d4 r4:00000000
<4>[ 1.976715] ---[ end trace 1b75b31a2719ed1d ]---
<6>[ 1.977416] H2W route = H2W-GPIO, BT-UART1
<6>[ 1.978515] input: h2w headset as /devices/virtual/input/input0
<6>[ 1.979064] H2W: Registering H2W (headset) driver finish
<6>[ 1.993347] [SMD]smd_alloc_channel() cid=27 size=08192 'SMD_GPSNMEA'
<6>[ 1.995391] ashmem: initialized
<6>[ 1.998260] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 2.000213] fuse init (API version 7.14)
<4>[ 2.001129] yaffs Jul 3 2012 12:37:01 Installing.
<6>[ 2.010742] io scheduler noop registered
<6>[ 2.011047] io scheduler deadline registered (default)
<6>[ 2.011932] [DISP]mddi: init() base=0xcf014000 irq=16
<7>[ 2.012756] [DISP]mddi runs at 122880000
<6>[ 2.014343] [DISP]mddi cmd send rtd: int 3a000, stat 8063, rtd val d
<6>[ 2.017089] [DISP]mddi: registering panel mddi_c_d263_0000
<6>[ 2.017364] [DISP]mddi: publish:
<6>[ 2.018890] [DISP]vsync on gpio 97 now 0
<6>[ 2.088134] [DISP]msmfb_probe() installing 320 x 480 panel
<6>[ 2.092803] PRUE G
<6>[ 2.093414] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 45) is a MSM HS UART
<6>[ 2.094390] msm_serial_hs module loaded
<6>[ 2.095214] [BT]msm_serial_hs module loaded
<6>[ 2.096374] [BT]msm_serial_hs module loaded
<6>[ 2.097351] [BT]msm_serial_hs module loaded
<6>[ 2.103454] loop: module loaded
<6>[ 2.103912] pmem: 1 init
<6>[ 2.104919] pmem_adsp: 0 init
<6>[ 2.105987] pmem_camera: 0 init
<6>[ 2.107696] Android kernel panic handler initialized (bind=kpanic)
<6>[ 2.108856] msm_nand: allocated dma buffer at ffa47000, dma_addr 275e4000
<6>[ 2.109588] status: c03120
<6>[ 2.109863] nandid: 5501bcec maker ec device bc
<6>[ 2.110137] Found a supported NAND device
<6>[ 2.110626] NAND Id : 0xBCEC
<6>[ 2.110870] Buswidth : 16 Bits
<6>[ 2.111145] Density : 512 MByte
<6>[ 2.111633] Pagesize : 2048 Bytes
<6>[ 2.111907] Erasesize: 131072 Bytes
<6>[ 2.112152] Oobsize : 64 Bytes
<6>[ 2.112487] msm_nand: read CFG0 = aa5400c0, CFG1 = 8746a
<6>[ 2.113006] CFG0 Init : 0xe85408c0
<6>[ 2.113281] CFG1 Init : 0x0008746a
<6>[ 2.113769] CFG0: cw/page=3 ud_sz=516 ecc_sz=10 spare_sz=0 num_addr_cycles=5
<6>[ 2.114074] DEV_CMD1: f00f3000
<6>[ 2.114410] <6>NAND_EBI2_ECC_BUF_CFG: 1ff
<5>[ 2.114929] Creating 6 MTD partitions on "msm_nand":
<5>[ 2.115234] 0x0000024c0000-0x000002500000 : "misc"
<5>[ 2.117950] 0x0000026c0000-0x000002bc0000 : "recovery"
<5>[ 2.127807] 0x000002bc0000-0x000002e40000 : "boot"
<5>[ 2.133789] 0x000002e40000-0x00000d840000 : "system"
<6>[ 2.340850] [SMD]smd_alloc_channel() cid=00 size=08192 'SMD_DS'
<6>[ 2.343505] [SMD]smd_alloc_channel() cid=07 size=08192 'SMD_DATA1'
<6>[ 2.345733] [SMD]smd_alloc_channel() cid=08 size=08192 'SMD_DATA2'
<6>[ 2.347534] [SMD]smd_alloc_channel() cid=09 size=08192 'SMD_DATA3'
<6>[ 2.349365] [SMD]smd_alloc_channel() cid=10 size=08192 'SMD_DATA4'
<5>[ 2.399444] 0x00000d840000-0x000015a40000 : "cache"
<5>[ 2.560302] 0x000015a40000-0x000020000000 : "userdata"
<6>[ 2.770782] [USB] msm72k_probe
<6>[ 2.771118] [USB] accessory detect 0
<6>[ 2.771392] [USB] id_pin_gpio 0
<6>[ 2.771667] [USB] dock detect 0
<6>[ 2.772155] [USB] dock pin gpio 0
<6>[ 2.772583] [USB] msm72k_probe() io=cf01c000, irq=47, dma=ffa48000(27609000)
<6>[ 2.774536] android init
<6>[ 2.774993] android_probe pdata: c05197a4
<6>[ 2.775482] android_bind
<7>[ 2.775756] android_bind_config
<6>[ 2.776855] android_usb gadget: android_usb ready
<6>[ 2.777191] [USB] msm72k_udc: registered gadget driver 'android_usb'
<6>[ 2.777862] f_adb init
<6>[ 2.778137] android_register_function adb
<6>[ 2.778381] f_mass_storage init
<6>[ 2.778808] fsg_probe pdev: c05192f0, pdata: c0519784
<6>[ 2.779449] android_register_function usb_mass_storage
<6>[ 2.779724] f_rndis init
<6>[ 2.780426] android_register_function rndis
<6>[ 2.780700] rndis_function_bind_config MAC: 00:00:00:00:00:00
<4>[ 2.781127] android_usb gadget: using random self ethernet address
<4>[ 2.781646] android_usb gadget: using random host ethernet address
<6>[ 2.783172] usb0: MAC 9a:73:15:a7:b5:4a
<6>[ 2.783477] usb0: HOST MAC 82:34:b3:48:92:71
<6>[ 2.784606] [USB] hsusb: IDLE -> ONLINE
<6>[ 2.785125] [USB] lpm exit
<6>[ 2.786163] [USB] hsusb: reset controller
<6>[ 2.786621] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[ 2.787139] android_usb gadget: Number of LUNs=1
<6>[ 2.787445] lun0: LUN: removable file: (no medium)
<6>[ 2.788360] adb_bind_config
<4>[ 2.789978] is_sapphire_gpiov20=0
<3>[ 2.837127] msm_i2c msm_i2c.0: error, status 63c8 (20,E4,00)(20,F4,00)(cnt:1,pos:0)
<3>[ 2.837646] msm_i2c msm_i2c.0: Error during data xfer (-5) (20,E4,00)
<6>[ 2.947296] synaptics_ts_probe: Product Major Version 3
<6>[ 2.948516] synaptics_ts_probe: Product Minor Version 1
<6>[ 2.949462] synaptics_ts_probe: product property 2
<6>[ 2.950653] synaptics_ts_probe: device control 81
<6>[ 2.951599] synaptics_ts_probe: interrupt enable 3
<6>[ 2.953948] synaptics_ts_probe: 0xe0: 1 1 1 2 3 1 0 1
<6>[ 2.955322] synaptics_ts_probe: Sensor properties 601
<6>[ 2.959106] synaptics_ts_probe: max_x 3475, max_y 5328
<6>[ 2.959625] synaptics_ts_probe: inactive_x -40 -40, inactive_y -31 -31
<6>[ 2.960113] synaptics_ts_probe: snap_x 40-48 40-48, snap_y 79-87 79-87
<6>[ 2.960937] input: synaptics-rmi-touchscreen as /devices/virtual/input/input1
<6>[ 2.962310] synaptics_ts_probe: Start touchscreen synaptics-rmi-touchscreen in interrupt mode
<6>[ 2.963684] [KEY] GPIO Input Driver: Start gpio inputs for sapphire-nav in interrupt mode
<6>[ 2.964752] input: sapphire-nav as /devices/virtual/input/input2
<6>[ 2.965759] [KEY] gpio_keys_scan_keys: key 1-272, 0 (168) changed to 0
<6>[ 2.966461] [KEY] GPIO Input Driver: Start gpio inputs for sapphire-nav-button in interrupt mode
<6>[ 2.967651] input: sapphire-nav-button as /devices/virtual/input/input3
<6>[ 2.968811] [KEY] GPIO Matrix Keypad Driver: Start keypad matrix for sapphire-keypad in interrupt mode
<6>[ 2.969787] [KEY] GPIO_Input_ISR : 0, return IRQ_HANDLED;
<6>[ 2.970367] [KEY] GPIO Input Driver: Start gpio inputs for sapphire-keypad in interrupt mode
<6>[ 2.971496] input: sapphire-keypad as /devices/virtual/input/input4
<6>[ 2.972900] using input dev h2w headset for key reset
<6>[ 2.973449] using input dev sapphire-nav for key reset
<6>[ 2.973724] using input dev sapphire-keypad for key reset
<6>[ 2.975585] using rtc device, msm_rtc, for alarms
<6>[ 2.975891] rs30000048:00010001 rs30000048:00010001: rtc core: registered msm_rtc as rtc0
<6>[ 2.977294] AKM8976A compass driver: init
<6>[ 2.980377] input: compass as /devices/virtual/input/input5
<6>[ 2.981933] Linux video capture interface: v2.00
<4>[ 2.982543] is_sapphire_gpiov20=0
<6>[ 2.983184] [CAM]sctrl.node 0
<6>[ 3.074249] [USB] ulpi: write 0x40 to 0x31
<6>[ 3.074554] [USB] ulpi: write 0x01 to 0x0d
<6>[ 3.074829] [USB] ulpi: write 0x01 to 0x10
<6>[ 3.075347] [USB] handle_notify_offline: notify offline
<6>[ 3.075714] [USB] msm_hsusb: enable pullup
<6>[ 3.079345] [USB] suspend
<4>[ 3.143951] is_sapphire_gpiov20=0
<6>[ 3.145507] msm_v4l2: msm_v4l2_init
<6>[ 3.146636] device-mapper: uevent: version 1.0.3
<6>[ 3.147216] [USB] not AC charger
<6>[ 3.148498] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
<6>[ 3.149108] Bluetooth: HCI UART driver ver 2.2
<6>[ 3.149383] Bluetooth: HCI H4 protocol initialized
<6>[ 3.149841] Bluetooth: HCILL protocol initialized
<6>[ 3.152526] mmc0: Qualcomm MSM SDCC at 0x00000000a0400000 irq 24,0 dma 8
<6>[ 3.153015] mmc0: Platform slot type: N/A
<6>[ 3.153289] mmc0: 4 bit data mode enabled
<6>[ 3.153533] mmc0: 8 bit data mode disabled
<6>[ 3.154022] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
<6>[ 3.154296] mmc0: Slot eject status = 1
<6>[ 3.154754] mmc0: Power save feature enable = 1
<6>[ 3.155029] mmc0: DM non-cached buffer at ffa4a000, dma_addr 0x27656000
<6>[ 3.155517] mmc0: DM cmd busaddr 0x27656000, cmdptr busaddr 0x27656300
<6>[ 3.157104] mmc1: Qualcomm MSM SDCC at 0x00000000a0500000 irq 26,190 dma 8
<6>[ 3.157623] mmc1: Platform slot type: N/A
<6>[ 3.157867] mmc1: 4 bit data mode enabled
<6>[ 3.158142] mmc1: 8 bit data mode disabled
<6>[ 3.158599] mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
<6>[ 3.158874] mmc1: Slot eject status = 0
<6>[ 3.159362] mmc1: Power save feature enable = 1
<6>[ 3.159637] mmc1: DM non-cached buffer at ffa4b000, dma_addr 0x27657000
<6>[ 3.160095] mmc1: DM cmd busaddr 0x27657000, cmdptr busaddr 0x27657300
<7>[ 3.160980] Registered led device: button-backlight
<7>[ 3.161895] Registered led device: red
<7>[ 3.162322] Registered led device: green
<7>[ 3.162719] Registered led device: blue
<7>[ 3.163330] Registered led device: jogball-backlight
<6>[ 3.165313] logger: created 64K log 'log_main'
<6>[ 3.165832] logger: created 256K log 'log_events'
<6>[ 3.166351] logger: created 64K log 'log_radio'
<6>[ 3.167022] logger: created 64K log 'log_system'
<6>[ 3.167999] GACT probability NOT on
<6>[ 3.168304] Mirror/redirect action on
<6>[ 3.168548] u32 classifier
<6>[ 3.169036] Actions configured
<6>[ 3.169281] Netfilter messages via NETLINK v0.30.
<6>[ 3.169738] nf_conntrack version 0.5.0 (3203 buckets, 12812 max)
<4>[ 3.170684] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
<4>[ 3.170959] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
<4>[ 3.171447] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
<6>[ 3.172241] ctnetlink v0.93: registering with nfnetlink.
<6>[ 3.172637] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[ 3.173126] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 3.174133] xt_time: kernel timezone is -0000
<6>[ 3.175140] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 3.175720] arp_tables: (C) 2002 David S. Miller
<6>[ 3.176361] TCP cubic registered
<6>[ 3.177337] NET: Registered protocol family 10
<6>[ 3.181365] NET: Registered protocol family 17
<6>[ 3.181976] NET: Registered protocol family 15
<5>[ 3.182464] Bridge firewalling registered
<6>[ 3.183258] Bluetooth: L2CAP ver 2.15
<6>[ 3.183746] Bluetooth: L2CAP socket layer initialized
<6>[ 3.184020] Bluetooth: SCO (Voice Link) ver 0.6
<6>[ 3.184509] Bluetooth: SCO socket layer initialized
<6>[ 3.185028] Bluetooth: RFCOMM TTY layer initialized
<6>[ 3.185302] Bluetooth: RFCOMM socket layer initialized
<6>[ 3.185760] Bluetooth: RFCOMM ver 1.11
<6>[ 3.186035] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 3.186492] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 3.187652] clock_late_init() disabled 16 unused clocks
<6>[ 3.188171] [Port list] init()
<6>[ 3.188446] [Port list] Virtual Address for port_list: [f812da80]
<6>[ 3.188690] [Port list] Physical Address for port_list: [1F2DA80]
<6>[ 3.190185] cpufreq: cpu0 init at 480000 switching to 352000
<4>[ 3.191009] sapphire_wifi_init: start
<6>[ 3.195281] rs30000048:00010001 rs30000048:00010001: setting system clock to 2012-07-03 06:25:08 UTC (1341296708)
<4>[ 3.196258] Warning: unable to open an initial console.
<6>[ 3.196624] [USB] reset
<6>[ 3.197265] Freeing init memory: 132K
<6>[ 3.198760] [USB] portchange USB_SPEED_HIGH
<3>[ 3.201751] BUG: scheduling while atomic: kmmcd/12/0x00000002
<4>[ 3.202392] Modules linked in:
<4>[ 3.203033] Backtrace:
<4>[ 3.203765] [<c002d6f4>] (dump_backtrace+0x0/0x114) from [<c03f8e14>] (dump_stack+0x18/0x1c)
<4>[ 3.204406] r7:ce260980 r6:c051e3ec r5:c051dfb8 r4:00000000
<4>[ 3.206054] [<c03f8dfc>] (dump_stack+0x0/0x1c) from [<c005ca50>] (__schedule_bug+0x54/0x60)
<4>[ 3.206726] [<c005c9fc>] (__schedule_bug+0x0/0x60) from [<c03f9104>] (schedule+0x74/0x348)
<4>[ 3.207366] r5:c051dfb8 r4:ce26e000
<4>[ 3.208374] [<c03f9090>] (schedule+0x0/0x348) from [<c03f9c44>] (schedule_timeout+0x1d0/0x204)
<4>[ 3.209045] [<c03f9a74>] (schedule_timeout+0x0/0x204) from [<c03f9ca0>] (schedule_timeout_uninterruptible+0x28/0x2c)
<4>[ 3.209716] r6:ce27f3ac r5:c05453e4 r4:00000011
<4>[ 3.211029] [<c03f9c78>] (schedule_timeout_uninterruptible+0x0/0x2c) from [<c006f844>] (msleep+0x1c/0x2c)
<4>[ 3.211730] [<c006f828>] (msleep+0x0/0x2c) from [<c0050a70>] (sapphire_sdslot_switchvdd+0x78/0x150)
<4>[ 3.212432] [<c00509f8>] (sapphire_sdslot_switchvdd+0x0/0x150) from [<c02a9d3c>] (msmsdcc_set_ios+0x264/0x568)
<4>[ 3.213073] r5:ce27f240 r4:ce27f4a0
<4>[ 3.214111] [<c02a9ad8>] (msmsdcc_set_ios+0x0/0x568) from [<c029f900>] (mmc_power_up+0x80/0xb8)
<4>[ 3.214782] [<c029f880>] (mmc_power_up+0x0/0xb8) from [<c02a0f30>] (mmc_rescan+0x338/0x470)
<4>[ 3.215423] r5:ce27f414 r4:ce27f240
<4>[ 3.216461] [<c02a0bf8>] (mmc_rescan+0x0/0x470) from [<c0077164>] (worker_thread+0x18c/0x23c)
<4>[ 3.217132] [<c0076fd8>] (worker_thread+0x0/0x23c) from [<c007ac44>] (kthread+0x84/0x8c)
<4>[ 3.217498] [<c007abc0>] (kthread+0x0/0x8c) from [<c0067b24>] (do_exit+0x0/0x6b4)
<4>[ 3.218139] r7:00000013 r6:c0067b24 r5:c007abc0 r4:ce217ef0
<6>[ 3.249969] [USB] send connect type 1
<6>[ 3.250244] [BATT] online=1
<6>[ 3.250457] [BATT] Update SMEM: cable type 1 at 2174335182 (2012-07-03 06:25:08.555241470 UTC)
<4>[ 3.256774] Smartass: frequency change failed: 576000 to 614000 => 576000
<6>[ 3.309356] [USB] reset
<6>[ 3.309631] [USB] portchange USB_SPEED_HIGH
<4>[ 3.321105] Smartass: frequency change failed: 576000 to 614000 => 576000
<6>[ 3.442352] android_usb gadget: high speed config #1: android
<6>[ 3.481231] keychord: using input dev sapphire-keypad for fevent
<6>[ 3.487915] yaffs: dev is 32505859 name is "mtdblock3"
<6>[ 3.488159] yaffs: passed flags ""
<4>[ 3.488403] yaffs: Attempting MTD mount on 31.3, "mtdblock3"
<4>[ 3.547363] yaffs: restored from checkpoint
<4>[ 3.548034] yaffs_read_super: isCheckpointed 1
<6>[ 3.557708] yaffs: dev is 32505861 name is "mtdblock5"
<6>[ 3.558074] yaffs: passed flags ""
<4>[ 3.558288] yaffs: Attempting MTD mount on 31.5, "mtdblock5"
<4>[ 3.576934] Smartass: frequency change failed: 576000 to 614000 => 576000
<4>[ 4.117340] mmc1: high speed mode max_dtr = 50000000
<4>[ 4.118011] mmc1: host does not support reading read-only switch. assuming write-enable.
<6>[ 4.118255] mmc1: new high speed SDHC card at address 1234
<6>[ 4.119750] mmcblk0: mmc1:1234 SA08G 7.42 GiB
<4>[ 4.120941] check_partition: Allocate memory for SD/eMMC card partition description (Once)
<6>[ 4.121398] mmcblk0: p1
<4>[ 4.127166] Smartass: frequency change failed: 576000 to 614000 => 576000
..........repeat line......
<4>[ 16.611480] yaffs_read_super: isCheckpointed 0
this is my patch , you need sapphire_gpio_write replace gpio_direction_output in board_sapphire.c, and will boot. good lucky!
View attachment 0703.zip
This is a great topic... I will follow it closely! And try to help...
Sent from my Dream/Sapphire using Tapatalk 2
I'm just a beginner at kernel programming, poor programming skills , and English is worse. Please have the abilities and interests to help me fixed it. blizard80, how to fix gpio error and touchscreen ?
dmesg on normal touchscreen:
===============================
<6>[ 4.955047] synaptics_ts_probe: Product Major Version 3
<6>[ 4.955749] synaptics_ts_probe: Product Minor Version 1
<6>[ 4.956451] synaptics_ts_probe: product property 2
<6>[ 4.957122] synaptics_ts_probe: device control 81
<6>[ 4.957824] synaptics_ts_probe: interrupt enable 3
<6>[ 4.959655] synaptics_ts_probe: 0xe0: 1 1 1 2 3 1 0 1
<6>[ 4.960723] synaptics_ts_probe: Sensor properties 601
<6>[ 4.964141] synaptics_ts_probe: max_x 3475, max_y 5328
<6>[ 4.964172] synaptics_ts_probe: inactive_x -40 -40, inactive_y -31 -31
<6>[ 4.964202] synaptics_ts_probe: snap_x 40-48 40-48, snap_y 79-87 79-87
<6>[ 4.964233] synaptics_ts_probe: margin_pixel_left: 0, margin_pixel_right:
0, margin_pixel_top: 0, margin_pixel_bottom: 0
<6>[ 4.964263] synaptics_ts_probe: ts_raw_width: 3395, ts_raw_height: 5266
<6>[ 4.964691] input: synaptics-rmi-touchscreen as /devices/virtual/input/inp
ut1
<6>[ 4.965667] synaptics_ts_probe: Start touchscreen synaptics-rmi-touchscree
n in interrupt mode
on no touchscreen lack this lines:
<6>[ 4.964233] synaptics_ts_probe: margin_pixel_left: 0, margin_pixel_right:
0, margin_pixel_top: 0, margin_pixel_bottom: 0
<6>[ 4.964263] synaptics_ts_probe: ts_raw_width: 3395, ts_raw_height: 5266
Wow, I thought the magic was dead and gone, I just happened to get one one back from a family member.
I've been working on the Ns and have been bored as of late, I'll re-download my sources and see what I can do about the deed-sleep issue.
Edit: as soon as it charges up, it is sooooo dead, charge light didn't even come on for 5 minutes, hope it works still, Crosses fingers
Ohh,carz,thank you very much for 32A NR! I find a lost diffrent between aosp kernel source and hero-kernel-2.6.35. Touchscreen problem maybe gpio driver changed from 2.6.29 to 2.6.35. And I confirm that deep sleep is ok, I use es taskmanager set auto flight mode from 0:00 to 7:00.
carz... thanks to you i stil use my htc magic as my phone!
hope you can update your ROM to cm7 oficial release source.
I don't remember if our kernel supports this, but this is a nice GUI for looking at CPU state history:
https://play.google.com/store/apps/details?id=com.bvalosek.cpuspy
Hopefully that helps.
I like the idea of using the kernel based on Hero, because it means we can port the Hero ROMs easier, and they closely match our device more closely than the G1/32B Magic. The extra RAM really defines the type of configuration you would set.
I find set min rate to 264000 can reslove sleep problem, Pls try it.
ziyouwa said:
I find set min rate to 264000 can reslove sleep problem, Pls try it.
Click to expand...
Click to collapse
Sounds promising. Didn't know why I didn't try playing around with acpuclock earlier.
I killed of 245MHz and upped voltages on the VDD as well. Results:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have no idea how to fix broken bluetooth on the other kernel.
This also would explain the instability I was experiencing with old radio ROMs based on cm-kernel sources.
Excited if this works. Thanks to croniccorey and ziyouwa.
Also noticed some differences in VDD.
To follow up on the acpuclock, carz kernel source has the following VDDs:
Code:
{ 19200, ACPU_PLL_TCXO, 0, 0, 19200, 0, VDD_0, 30720, 0, 0, 4 },
{ 122880, ACPU_PLL_0, 4, 1, 61440, 1, VDD_1, 61440, 0, 0, 4 },
{ 160000, ACPU_PLL_1, 1, 5, 53333, 2, VDD_1, 61440, 0, 0, 6 },
{ 176000, ACPU_PLL_2, 2, 5, 88000, 1, VDD_1, 61440, 0, 0, 5 },
{ 245760, ACPU_PLL_0, 4, 0, 81920, 2, VDD_2, 61440, 0, 0, 5 },
{ 352000, ACPU_PLL_2, 2, 2, 88000, 3, VDD_4, 128000, 0, 3, 7 },
{ 480000, ACPU_PLL_1, 1, 1, 120000, 3, VDD_6, 120000, 0, 2, -1 },
This is Flykernel:
Code:
/* 0*/ { 19200, ACPU_PLL_TCXO, 0, 0, 19200, 0, VDD_0, 30720, 0, 0, 3 },
/* 1*/ { 122880, ACPU_PLL_0, 4, 1, 61440, 1, VDD_3, 61440, 0, 0, 4 },
/* 2*/ { 160000, ACPU_PLL_1, 1, 5, 53333, 2, VDD_3, 61440, 0, 0, 6 },
/* 3*/ { 176000, ACPU_PLL_2, 2, 5, 88000, 1, VDD_3, 61440, 0, 0, 6 },
/* 4*/ { 245760, ACPU_PLL_0, 4, 0, 81920, 2, VDD_4, 61440, 0, 0, 6 },
/* 5*/ { 264000, ACPU_PLL_2, 2, 3, 88000, 2, VDD_3, 128000, 0, 0, 8 },
/* 6*/ { 352000, ACPU_PLL_2, 2, 2, 88000, 3, VDD_5, 128000, 0, 3, 13 },
/* 7*/ { 480000, ACPU_PLL_1, 1, 1, 120000, 3, VDD_6, 120000, 0, 4, 20 },
/* 8*/ { 518400, ACPU_PLL_2, 2, 1, 132000, 3, VDD_6, 160000, 0, 5, -1, 0x1b },
/* 9*/ { 528000, ACPU_PLL_2, 2, 1, 132000, 3, VDD_6, 160000, 0, 5, -1 },
Working one that plugs into carz kernel is attached.
Edit 2:
I think just removing 245MHz did the trick. Good call ziyouwa.
Hero devs actually DO NOT INCLUDE 245MHz with Flykernel as one of the selectable frequencies for our Hboot/radio combination.
I have reverted the VDD levels, and deep sleep is still working.
Very nice,xaueious! I think 2.6.29 is too old, 2.6.35 maybe is good choice. Who can help fix touchscreen in hero-kernel-2.6.35?
ziyouwa said:
Very nice,xaueious! I think 2.6.29 is too old, 2.6.35 maybe is good choice. Who can help fix touchscreen in hero-kernel-2.6.35?
Click to expand...
Click to collapse
Not sure about touchscreen. But this fix is for 2.6.34.4 (https://github.com/carz2/cm-kernel), which isn't as old as 2.6.29.
This builds with the device tree here: https://github.com/carz2/android_device_htc_dream_sapphire
You need to run vendor_setup.sh or do the equivalent. Working proprietary bits are in latest carz CM7 build. I only know how to build AOSP ROMs, and have little HTC ROM porting experience. So I can't really help with that .
Edit:
There is an existing 2.6.35.10 kernel by SebastianFM (https://github.com/SebastianFM/sapphire-2.6.35), but I think this one also had sleep of death. So maybe it was the 245MHz that was causing SOD for some reason, because the VDDs match my acpuclock. I noticed that the Hero kernels also skip 245MHz.
If you remove 245MHz, we may have a working 2.6.35.10 kernel
uhhm u know i dont know what tormented me to try tis kernel i have the magic 1.2 lol ikr but it is just i recognized that in truth we didnt realy have a kernel build for the 1.2 version for gingerbread the best i can do is flash anykernel by cronmod the kernel ezzbuilt is not working via usb and it gives me a wifi error(atleast on cronmods 1.5 rom) think u can make it happen and even give it 710mhz ability ezz?

Stuck on CWM 6.0.1.3 recovery screen

Hi,
My TF700 is stuck on CWM 6.0.1.3 (non touch) recovery screen, it always goes there.
I was now able to use adb command (it shows serial no 0123456789ABCDE is it normal?).
Fastboot does not work
Can i do something to recover my TF700?
Thanks for your help.
Kalimeruh said:
Hi,
My TF700 is stuck on CWM 6.0.1.3 (non touch) recovery screen, it always goes there.
I was now able to use adb command (it shows serial no 0123456789ABCDE is it normal?).
Fastboot does not work
Can i do something to recover my TF700?
Thanks for your help.
Click to expand...
Click to collapse
What bootloader version do you have? (4.1.1 or 4.2.1)? can you boot into the OS?
buhohitr said:
What bootloader version do you have? (4.1.1 or 4.2.1)? can you boot into the OS?
Click to expand...
Click to collapse
I think it is 4.2.1. I only can get to the CWM recovery (directly).
Kalimeruh said:
I think it is 4.2.1. I only can get to the CWM recovery (directly).
Click to expand...
Click to collapse
Did you try to use CWM to reflash rom/kernel?
buhohitr said:
Did you try to use CWM to reflash rom/kernel?
Click to expand...
Click to collapse
The volume + and - do not work. I'm only able to select option reboot system now.
Is there something that i can do from adb? It is seems to be the only way i can communicate with the tablet.
Kalimeruh said:
The volume + and - do not work. I'm only able to select option reboot system now.
Is there something that i can do from adb? It is seems to be the only way i can communicate with the tablet.
Click to expand...
Click to collapse
I see, OK let do this:
1) Download full Asus firmware and unzip all the way until you see the "blob" file
2) Copy the blob file to your Micro sdcard using your PC then then insert the card back into your tablet
3) On your PC, execute the following adb commands:
adb shell hit enter(you are going to see bunch of weird characters, this's normal)
dd if=/Removable/MicroSD/blob of=/dev/block/mmcblk0p4 hit enter and wait for around 10-20min.
Update process will start and table will reboot once done. Remember you will have stock rom and recovery back once done.
buhohitr said:
I see, OK let do this:
1) Download full Asus firmware and unzip all the way until you see the "blob" file
2) Copy the blob file to your Micro sdcard using your PC then then insert the card back into your tablet
3) On your PC, execute the following adb commands:
adb shell hit enter(you are going to see bunch of weird characters, this's normal)
dd if=/Removable/MicroSD/blob of=/dev/block/mmcblk0p4 hit enter and wait for around 10-20min.
Update process will start and table will reboot once done. Remember you will have stock rom and recovery back once done.
Click to expand...
Click to collapse
Thanks for your reply
I got an error "/Removable/MicroSD/blob no such file or directory".
I'm trying now the abd push blob /sdcard/blob and then i'll do the rest on the command line afterwards.
Do you think it will work?
[Update] Didn't work
When the tablet is connected to the pc the screen is always showing "CWM 6.0.1.3", does that have any influence?
Thanks
I saw that i'm also able to use nvflash and wheelie.
The only command i cannot use is fastboot
Can somebody please help me?
Kalimeruh said:
I saw that i'm also able to use nvflash and wheelie.
The only command i cannot use is fastboot
Can somebody please help me?
Click to expand...
Click to collapse
If you post error messages instead of "doesn't work", maybe.
You said you cannot use fastboot - why?
You said you are able to use nvflash and wheelie, does that mean you also have the required files like "blob.bin", "bricksafe.img" etc.?
_that said:
If you post error messages instead of "doesn't work", maybe.
You said you cannot use fastboot - why?
You said you are able to use nvflash and wheelie, does that mean you also have the required files like "blob.bin", "bricksafe.img" etc.?
Click to expand...
Click to collapse
Basically because i don't have error messages.
I cannot use the fastboot because the tablet is stuck on the screen of the CWM i cannot got out. Either it is on recovery mode or on APX... When i use fastboot command cmd cannot find devices.
Regarding nvflash and wheelie is means that i am able to communicate with the tablet. I have one ebtblob.bin, i tried but i got one error ]Failed to read RCMVERS from blob file.
Can you give me a hint?
Thanks
Kalimeruh said:
I cannot use the fastboot because the tablet is stuck on the screen of the CWM i cannot got out. Either it is on recovery mode or on APX... When i use fastboot command cmd cannot find devices.
Click to expand...
Click to collapse
What happens when you try to enter the bootloader menu? (hold Volume-left while turning the tablet on)
Kalimeruh said:
Regarding nvflash and wheelie is means that i am able to communicate with the tablet. I have one ebtblob.bin, i tried but i got one error ]Failed to read RCMVERS from blob file.
Can you give me a hint?
Click to expand...
Click to collapse
So you don't have a blob for your device, which means you can't use nvflash.
Since you can communicate with the recovery via adb, please post the output of
Code:
adb shell ls -l /dev/block/mmc*
to see if your recovery can access the internal storage.
_that said:
What happens when you try to enter the bootloader menu? (hold Volume-left while turning the tablet on)
It goes directly to CWM 6.0.1.3 (non touch version) where i cannot do anything because volume up and down do not work.
So you don't have a blob for your device, which means you can't use nvflash.
Since you can communicate with the recovery via adb, please post the output of
Code:
adb shell ls -l /dev/block/mmc*
to see if your recovery can access the internal storage.
Click to expand...
Click to collapse
brw------- 1 root root 179, 0 Jan 19 15:52 /dev/block/mmcblk0
brw------- 1 root root 179, 1 Jan 19 15:52 /dev/block/mmcblk0p1
-rw-rw-rw- 1 root root 1088 Jan 19 15:52 /dev/block/mmcblk0p3
Kalimeruh said:
brw------- 1 root root 179, 0 Jan 19 15:52 /dev/block/mmcblk0
brw------- 1 root root 179, 1 Jan 19 15:52 /dev/block/mmcblk0p1
-rw-rw-rw- 1 root root 1088 Jan 19 15:52 /dev/block/mmcblk0p3
Click to expand...
Click to collapse
That's very bad - it should show at least mmcblk0p1 to mmcblk0p8. That means you can't use the recovery to modify anything on your internal storage.
How did you get into this situation? "Wipe data" in the bootloader menu?
_that said:
That's very bad - it should show at least mmcblk0p1 to mmcblk0p8. That means you can't use the recovery to modify anything on your internal storage.
How did you get into this situation? "Wipe data" in the bootloader menu?
Click to expand...
Click to collapse
This happened since i've installed CWM 6.0.1.3, i'm not able to do anything.
Is there any solution?
Kalimeruh said:
This happened since i've installed CWM 6.0.1.3, i'm not able to do anything.
Is there any solution?
Click to expand...
Click to collapse
If you can't get fastboot to work, I have no other idea.
_that said:
If you can't get fastboot to work, I have no other idea.
Click to expand...
Click to collapse
Will this http://forum.xda-developers.com/showthread.php?t=1994705 work for me?
Kalimeruh said:
Will this http://forum.xda-developers.com/showthread.php?t=1994705 work for me?
Click to expand...
Click to collapse
No, that requires a running Android system, or at least a recovery that can access your internal storage.
To get more info about your problem, reboot your tablet and run the following command on your computer:
Code:
adb shell dmesg > dmesg.txt
and post the resulting file.
Also try this:
Code:
adb shell hexdump -C -s 0x380000 -n 8 /dev/block/mmcblk0
and tell me if it outputs "ANDROID!" (after some hexadecimal numbers).
_that said:
No, that requires a running Android system, or at least a recovery that can access your internal storage.
To get more info about your problem, reboot your tablet and run the following command on your computer:
Code:
adb shell dmesg > dmesg.txt
and post the resulting file.
Click to expand...
Click to collapse
Here you are:
<6>[ 0.000000] Initializing cgroup subsys cpu
<5>[ 0.000000] Linux version 2.6.39.4-cyanogenmod-g80ca3c6 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Sep 14 10:04:19 MST 2012
<4>[ 0.000000] CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387f
<4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[ 0.000000] Machine: cardhu
<4>[ 0.000000] Ignoring unrecognised tag 0x41000801
<4>[ 0.000000] Ignoring unrecognised tag 0x41000801
<4>[ 0.000000] Ignoring unrecognised tag 0x41000801
<4>[ 0.000000] Ignoring unrecognised tag 0x41000801
<4>[ 0.000000] Ignoring unrecognised tag 0x41000801
<4>[ 0.000000] Ignoring unrecognised tag 0x41000801
<4>[ 0.000000] Ignoring unrecognised tag 0x41000801
<6>[ 0.000000] Found tegra_fbmem: [email protected]
<6>[ 0.000000] Tegra reserved memory:
<6>[ 0.000000] LP0: bddf9000 - bddfafff
<6>[ 0.000000] Bootloader framebuffer: abc01000 - ac4cbfff
<6>[ 0.000000] Framebuffer: bec00000 - bf4fffff
<6>[ 0.000000] 2nd Framebuffer: bf500000 - bfdfffff
<6>[ 0.000000] Carveout: 00000000 - 00000000
<6>[ 0.000000] Vpr: 00000000 - 00000000
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
<7>[ 0.000000] On node 0 totalpages: 256768
<7>[ 0.000000] free_area_init_node: node 0, pgdat c082d200, node_mem_map c0989000
<7>[ 0.000000] Normal zone: 1536 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 195072 pages, LIFO batch:31
<7>[ 0.000000] HighMem zone: 508 pages used for memmap
<7>[ 0.000000] HighMem zone: 59652 pages, LIFO batch:15
<6>[ 0.000000] Tegra3: CPU Speedo ID 5, CPU Process ID 3, Soc Speedo ID 2
<6>[ 0.000000] Tegra Revision: A03 SKU: 0x80 CPU Process: 3 Core Process: 0
<6>[ 0.000000] tegra: PLLP fixed rate: 408000000
<6>[ 0.000000] [MISC]: adopt kernel cmdline prior to tegra3_get_project_id ready.
<4>[ 0.000000] Lowering cpu_lp maximum rate from 620000000 to 513000000
<4>[ 0.000000] Lowering sbus maximum rate from 334000000 to 267000000
<4>[ 0.000000] Lowering vi maximum rate from 425000000 to 409000000
<4>[ 0.000000] Lowering vde maximum rate from 600000000 to 437000000
<4>[ 0.000000] Lowering mpe maximum rate from 600000000 to 446000000
<4>[ 0.000000] Lowering 2d maximum rate from 600000000 to 446000000
<4>[ 0.000000] Lowering epp maximum rate from 600000000 to 446000000
<4>[ 0.000000] Lowering 3d maximum rate from 600000000 to 446000000
<4>[ 0.000000] Lowering 3d2 maximum rate from 600000000 to 446000000
<4>[ 0.000000] Lowering se maximum rate from 600000000 to 446000000
<4>[ 0.000000] Lowering host1x maximum rate from 300000000 to 267000000
<4>[ 0.000000] Lowering cbus maximum rate from 700000000 to 437000000
<4>[ 0.000000] Lowering pll_c maximum rate from 1400000000 to 1066000000
<4>[ 0.000000] Lowering ndflash maximum rate from 240000000 to 200000000
<4>[ 0.000000] Lowering sbc1 maximum rate from 160000000 to 100000000
<4>[ 0.000000] Lowering sbc2 maximum rate from 160000000 to 100000000
<4>[ 0.000000] Lowering sbc3 maximum rate from 160000000 to 100000000
<4>[ 0.000000] Lowering sbc4 maximum rate from 160000000 to 100000000
<4>[ 0.000000] Lowering sbc5 maximum rate from 160000000 to 100000000
<4>[ 0.000000] Lowering sbc6 maximum rate from 160000000 to 100000000
<4>[ 0.000000] Lowering dsia maximum rate from 500000000 to 275000000
<4>[ 0.000000] Lowering dsib maximum rate from 500000000 to 275000000
<4>[ 0.000000] Lowering cpu_g maximum rate from 1900000000 to 1370000000
<4>[ 0.000000] Keep max_rate of cpu_g as 1900000000
<4>[ 0.000000] max_millivolts of cpu_g is d->max_millivolts =1275
<4>[ 0.000000] tegra3_dvfs: cold offset 50000000 is too high for regular dvfs limit 1000000
<4>[ 0.000000] tegra3_dvfs: cold offset 50000000 is too high for regular dvfs limit 1000000
<6>[ 0.000000] tegra dvfs: VDD_CPU nominal 1075mV, scaling enabled
<6>[ 0.000000] tegra dvfs: VDD_CORE nominal 1200mV, scaling enabled
<6>[ 0.000000] L310 cache controller enabled
<6>[ 0.000000] l2x0: 8 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7c080001, Cache size: 1048576 B
<6>[ 0.000000] PERCPU: Embedded 8 pages/cpu @c1191000 s8992 r8192 d15584 u32768
<7>[ 0.000000] pcpu-alloc: s8992 r8192 d15584 u32768 alloc=8*4096
<7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 254724
<5>[ 0.000000] Kernel command line: tegraid=30.1.3.0.0 [email protected] commchip_id=0 androidboot.serialno=015d2d431f0c0208 androidboot.commchip_id=0 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,0 usbcore.old_scheme_first=1 [email protected] [email protected] core_edp_mv=0 audio_codec=wm8903 board_info=245:0:14:ed:28 tegraboot=sdmmc gpt gpt_sector=62078975 android.kerneltype=recovery androidboot.productid=0x04 androidboot.carrier=wifi-only
<6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.000000] Memory: 1003MB = 1003MB total
<5>[ 0.000000] Memory: 997352k/997352k available, 49176k reserved, 240632K highmem
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
<5>[ 0.000000] vmalloc : 0xf0800000 - 0xf8000000 ( 120 MB)
<5>[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
<5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
<5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
<5>[ 0.000000] .init : 0xc0008000 - 0xc0042000 ( 232 kB)
<5>[ 0.000000] .text : 0xc0042000 - 0xc075ce44 (7276 kB)
<5>[ 0.000000] .data : 0xc075e000 - 0xc082edc0 ( 836 kB)
<6>[ 0.000000] Preemptable hierarchical RCU implementation.
<6>[ 0.000000] RCU-based detection of stalled CPUs is disabled.
<6>[ 0.000000] Verbose stalled-CPUs detection is disabled.
<6>[ 0.000000] NR_IRQS:800
<6>[ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
<6>[ 0.000202] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736)
<6>[ 0.040062] pid_max: default: 32768 minimum: 301
<6>[ 0.040237] Mount-cache hash table entries: 512
<6>[ 0.040960] Initializing cgroup subsys debug
<6>[ 0.040972] Initializing cgroup subsys cpuacct
<6>[ 0.041033] Initializing cgroup subsys freezer
<6>[ 0.041060] CPU: Testing write buffer coherency: ok
<6>[ 0.041304] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
<4>[ 0.161490] CPU1: Booted secondary processor
<4>[ 0.221464] CPU2: Booted secondary processor
<4>[ 0.281459] CPU3: Booted secondary processor
<6>[ 0.301280] Brought up 4 CPUs
<6>[ 0.301291] SMP: Total of 4 processors activated (3984.58 BogoMIPS).
<6>[ 0.304893] print_constraints: dummy:
<6>[ 0.305082] NET: Registered protocol family 16
<6>[ 0.305853] host1x bus init
<6>[ 0.306779] [MISC]: adopt kernel cmdline prior to tegra3_get_project_id ready.
<6>[ 0.306788] [MISC]: adopt kernel cmdline prior to tegra3_get_project_id ready.
<4>[ 0.307991] Check TF700T pinmux
<4>[ 0.308115] tegra_booting_info reg=0
<4>[ 0.308121] tegra_booting_info-normal
<6>[ 0.308489] cardhu_edp_init : use asus edp policy
<6>[ 0.308534] Selecting UARTA as the debug console
<4>[ 0.308547] console_none_on_cmdline+uart_debug_init
<6>[ 0.308554] The debug console clock name is uarta_dbg
<6>[ 0.309757] ram_console: got buffer at beb00000, size 100000
<6>[ 0.309937] ram_console: uncorrectable error in header
<6>[ 0.309946] ram_console: no valid data in buffer (sig = 0x02034044)
<6>[ 0.324235] console [ram-1] enabled
<6>[ 0.324550] TPS6591x GPIO2 was reprogrammed to follow state of SLEEP input
<6>[ 0.324735] Registering the device TPS62361B
<6>[ 0.451272] Registering tegra-kbc
<6>[ 0.451437] Registering gpio keys
<4>[ 0.451665] Check TF202T setting
<4>[ 0.451669]
<6>[ 0.494957] fjm6mo i2c_register_board_info
<6>[ 0.495151] mi1040 i2c_register_board_info
<6>[ 0.495413] iCatch7002a i2c_register_board_info
<6>[ 0.495603] *** MPU START *** cardhu_mpuirq_init...
<6>[ 0.495871] initial mpu with TF700T config...
<6>[ 0.495971] *** MPU END *** mpuirq_init...
<7>[ 0.496177] gpio_request: gpio-72 (GMI_CS0) status -16
<3>[ 0.496354] set_unused_pin_gpio() Error in gpio_request() for gpio 72
<7>[ 0.496451] gpio_request: gpio-74 (GMI_CS1) status -16
<3>[ 0.496625] set_unused_pin_gpio() Error in gpio_request() for gpio 74
<7>[ 0.496725] gpio_request: gpio-83 (GMI_CS2) status -16
<3>[ 0.496900] set_unused_pin_gpio() Error in gpio_request() for gpio 83
<4>[ 0.497003] BOARD_PM269:TF700T_Elpida 800 MHZ version 5 (0413)
<3>[ 0.497260] tegra: invalid EMC DFS table: maximum rate 800000 kHz does not match nominal voltage 1200
<6>[ 0.497521] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
<6>[ 0.497622] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
<6>[ 0.497813] hw-breakpoint: maximum watchpoint size is 4 bytes.
<6>[ 0.498252] tegra_iovmm_register: added iovmm-smmu
<6>[ 0.504633] bio: create slab <bio-0> at 0
<6>[ 0.505324] vgaarb: loaded
<4>[ 0.505471] i2c-core: driver [tps6591x] using legacy suspend method
<4>[ 0.505646] i2c-core: driver [tps6591x] using legacy resume method
<4>[ 0.505840] i2c-core: driver [tps80031] using legacy suspend method
<4>[ 0.505936] i2c-core: driver [tps80031] using legacy resume method
<4>[ 0.506150] i2c-core: driver [ricoh583] using legacy suspend method
<4>[ 0.506247] i2c-core: driver [ricoh583] using legacy resume method
<5>[ 0.506682] SCSI subsystem initialized
<6>[ 0.506863] tegra-otg tegra-otg: otg transceiver registered
<6>[ 0.507185] usbcore: registered new interface driver usbfs
<6>[ 0.507350] usbcore: registered new interface driver hub
<6>[ 0.507624] usbcore: registered new device driver usb
<6>[ 0.509175] tps6591x 4-002d: VERNUM is 02
<6>[ 0.531278] Wake18 for irq=118
<6>[ 0.531452] Enabling wake18
<6>[ 0.531881] print_constraints: tps6591x_VIO: 1500 <--> 3300 mV at 1800 mV normal standby
<6>[ 0.532706] print_constraints: tps6591x_VDD_1: 600 <--> 1500 mV at 600 mV normal standby
<6>[ 0.533285] print_constraints: tps6591x_VDD_2: 600 <--> 1500 mV at 1200 mV normal standby
<6>[ 0.534152] print_constraints: tps6591x_VDDCTRL: 600 <--> 1400 mV at 1025 mV normal standby
<6>[ 0.534658] print_constraints: tps6591x_LDO_1: 1000 <--> 3300 mV at 2850 mV normal standby
<6>[ 0.534774] set_supply: tps6591x_LDO_1: supplied by tps6591x_VDD_2
<6>[ 0.535285] print_constraints: tps6591x_LDO_2: 1050 <--> 3300 mV at 1000 mV normal standby
<6>[ 0.535477] set_supply: tps6591x_LDO_2: supplied by tps6591x_VDD_2
<6>[ 0.535855] print_constraints: tps6591x_LDO_3: 1000 <--> 3300 mV at 1000 mV normal standby
<6>[ 0.536366] print_constraints: tps6591x_LDO_4: 1000 <--> 3300 mV at 1200 mV normal standby
<6>[ 0.536799] print_constraints: tps6591x_LDO_5: 1000 <--> 3300 mV at 1000 mV normal standby
<6>[ 0.537350] print_constraints: tps6591x_LDO_6: 1200 mV normal standby
<6>[ 0.537544] set_supply: tps6591x_LDO_6: supplied by tps6591x_VIO
<6>[ 0.538307] print_constraints: tps6591x_LDO_7: 1200 mV normal standby
<6>[ 0.538422] set_supply: tps6591x_LDO_7: supplied by tps6591x_VIO
<6>[ 0.539020] print_constraints: tps6591x_LDO_8: 1000 <--> 3300 mV at 1000 mV normal standby
<6>[ 0.539136] set_supply: tps6591x_LDO_8: supplied by tps6591x_VIO
<6>[ 0.539911] tps6591x register misc device for I2C stress test rc=0
<6>[ 0.546588] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[ 0.547109] Bluetooth: Core ver 2.16
<6>[ 0.547243] NET: Registered protocol family 31
<6>[ 0.547419] Bluetooth: HCI device and connection manager initialized
<6>[ 0.547518] Bluetooth: HCI socket layer initialized
<6>[ 0.547689] Bluetooth: L2CAP socket layer initialized
<6>[ 0.547869] Bluetooth: SCO socket layer initialized
<6>[ 0.548319] cfg80211: Calling CRDA to update world regulatory domain
<6>[ 0.549190] print_constraints: fixed_reg_en_5v_cp: 5000 mV normal standby
<6>[ 0.550120] print_constraints: fixed_reg_en_5v0: 5000 mV normal standby
<6>[ 0.550848] print_constraints: fixed_reg_en_ddr: 1500 mV normal standby
<6>[ 0.551481] print_constraints: fixed_reg_en_3v3_sys: 3300 mV normal standby
<6>[ 0.552013] print_constraints: fixed_reg_en_3v3_modem: 3300 mV normal standby
<6>[ 0.552312] print_constraints: fixed_reg_cam1_ldo_en: 2800 mV normal standby
<6>[ 0.552500] set_supply: fixed_reg_cam1_ldo_en: supplied by fixed_reg_en_3v3_sys
<6>[ 0.552783] print_constraints: fixed_reg_cam2_ldo_en: 2800 mV normal standby
<6>[ 0.552892] set_supply: fixed_reg_cam2_ldo_en: supplied by fixed_reg_en_3v3_sys
<6>[ 0.553235] print_constraints: fixed_reg_cam3_ldo_en: 3300 mV normal standby
<6>[ 0.553337] set_supply: fixed_reg_cam3_ldo_en: supplied by fixed_reg_en_3v3_sys
<6>[ 0.553699] print_constraints: fixed_reg_en_vdd_com: 3300 mV normal standby
<6>[ 0.553887] set_supply: fixed_reg_en_vdd_com: supplied by fixed_reg_en_3v3_sys
<6>[ 0.554179] print_constraints: fixed_reg_en_3v3_fuse: 3300 mV normal standby
<6>[ 0.554368] set_supply: fixed_reg_en_3v3_fuse: supplied by fixed_reg_en_3v3_sys
<6>[ 0.554734] print_constraints: fixed_reg_en_3v3_emmc: 3300 mV normal standby
<6>[ 0.554840] set_supply: fixed_reg_en_3v3_emmc: supplied by fixed_reg_en_3v3_sys
<6>[ 0.555207] print_constraints: fixed_reg_en_1v8_cam: 1800 mV normal standby
<6>[ 0.555317] set_supply: fixed_reg_en_1v8_cam: supplied by tps6591x_VIO
<6>[ 0.555717] print_constraints: fixed_reg_dis_5v_switch: 5000 mV normal standby
<6>[ 0.555905] set_supply: fixed_reg_dis_5v_switch: supplied by fixed_reg_en_5v0
<6>[ 0.556322] print_constraints: fixed_reg_en_vdd_bl: 5000 mV normal standby
<6>[ 0.556692] print_constraints: fixed_reg_en_vdd_pnl1: 3300 mV normal standby
<6>[ 0.556880] set_supply: fixed_reg_en_vdd_pnl1: supplied by fixed_reg_en_3v3_sys
<6>[ 0.558281] print_constraints: tps62361B: 500 <--> 1770 mV at 1160 mV normal standby
<6>[ 0.558641] tps6236x register misc device for I2C stress test rc=0 tps->chip_id=1 chip_id=87
<6>[ 0.559016] print_constraints: gpio-switch-en_usb1_vbus_oc: 5000 mV normal standby
<7>[ 0.559176] gpio_request: gpio-122 (gpio-switch-en_vddio_vid_oc) status -16
<3>[ 0.559360] gpio-switch-regulator gpio-switch-regulator.17: Unable to request gpio 122
<3>[ 0.559540] gpio-switch-regulator gpio-switch-regulator.17: Unable to register regulator gpio-switch-en_vddio_vid_oc
<6>[ 0.559810] tegra: started io power detection dynamic control
<6>[ 0.559909] tegra: NO_IO_POWER setting 0x1200
<6>[ 0.560008] Switching to clocksource timer_us
<4>[ 0.560208] stop_machine_cpu_stop cpu=1
<4>[ 0.560216] stop_machine_cpu_stop cpu=2
<4>[ 0.560223] stop_machine_cpu_stop cpu=3
<4>[ 0.560230] stop_machine_cpu_stop cpu=0
<4>[ 0.560667] __stop_cpus: wait_for_completion_timeout+
<4>[ 0.560842] __stop_cpus: smp=0 done.executed=1 done.ret =0-
<6>[ 0.561290] Switched to NOHz mode on CPU #0
<6>[ 0.561498] Switched to NOHz mode on CPU #3
<6>[ 0.561505] Switched to NOHz mode on CPU #2
<6>[ 0.561535] Switched to NOHz mode on CPU #1
<6>[ 0.562155] tegra-nvmap tegra-nvmap: created carveout iram (255KiB)
<6>[ 0.563130] NET: Registered protocol family 2
<6>[ 0.563473] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.564003] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>[ 0.565699] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
<6>[ 0.566618] TCP: Hash tables configured (established 131072 bind 65536)
<6>[ 0.566795] TCP reno registered
<6>[ 0.566894] UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 0.567092] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 0.567607] NET: Registered protocol family 1
<6>[ 0.568039] RPC: Registered udp transport module.
<6>[ 0.568140] RPC: Registered tcp transport module.
<6>[ 0.568316] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[ 0.568416] PCI: CLS 0 bytes, default 32
<6>[ 0.568662] Unpacking initramfs...
<6>[ 0.647416] Freeing initrd memory: 1796K
<6>[ 0.647648] PMU: registered new PMU device of type 0
<6>[ 0.648210] Tegra auto-hotplug initialized: disabled
<4>[ 0.648312] tegra_cpufreq_init freq_table_size=14
<6>[ 0.648414] cpu-tegra: init EDP limit: 1550 MHz
<4>[ 0.648629] tegra_cpu_init : emc_clk->min_rate to 204M
<4>[ 0.648889] [Warning]tegra3_cpu_clk_set_rate set vdd_cpu as power source for cpu_g reg=ef946120
<4>[ 0.649296] tegra_cpu_init : emc_clk->min_rate to 204M
<4>[ 0.649486] tegra_cpu_init : emc_clk->min_rate to 204M
<4>[ 0.649672] tegra_cpu_init : emc_clk->min_rate to 204M
<6>[ 0.649939] vibrator_init+ #####
<6>[ 0.650191] vibrator_init- #####
<4>[ 0.670855] highmem bounce pool size: 64 pages
<6>[ 0.671113] ashmem: initialized
<6>[ 0.672253] fuse init (API version 7.16)
<6>[ 0.672490] Registering char device tf_driver (122:0)
<6>[ 0.673537] io scheduler noop registered
<6>[ 0.673702] io scheduler deadline registered
<6>[ 0.673831] io scheduler cfq registered (default)
<4>[ 0.674167] Check create a new adapter
<6>[ 0.694086] tegra_grhost tegra_grhost: initialized
<6>[ 0.694220] tegra_dc_module_init+ #####
<6>[ 0.694464] tegra_dc_module_init- #####
<4>[ 0.694926] Disp: diff_msec= 5938
<4>[ 0.695086] Check cardhu_panel_enable
<4>[ 0.695245] Check panel is panasonic
<4>[ 0.720676] Check power on/off for bridge IC
<4>[ 0.720766] Check enable TF301_1.8V
<4>[ 0.730939] Check enable TF301_I2C_Switch
<4>[ 0.741042] Check enable TF301_OSC
<4>[ 0.761127] Check tegra_dc_rgb_enable
<4>[ 0.761283] Check set polarity
<6>[ 0.761414] tegradc tegradc.0: probed
<6>[ 0.761710] tegradc tegradc.0: probed
<6>[ 0.762070] Wake4 for irq=335
<6>[ 0.762575] nvhdcp: using "always on" policy.
<6>[ 0.762920] tegradc tegradc.1: probed
<6>[ 0.763234] tegradc tegradc.1: probed
<3>[ 0.763345] hdmi: couldn't get regulator vdd_hdmi_con
<6>[ 0.763442] Wake4 for irq=335
<6>[ 0.763603] Enabling wake4
<6>[ 0.763692] gpio bank wake found: wake4 for irq=67
<6>[ 0.763779] Enabling wake4
<6>[ 0.764160] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[ 1.410772] serial8250.0: ttyS0 at MMIO 0x70006000 (irq = 68) is a Tegra
<6>[ 3.026014] console [ttyS0] enabled
<6>[ 3.150802] tegra_uart_init+ #####
<6>[ 3.154346] tegra_uart.1: ttyHS1 at I/O 0x0 (irq = 69) is a unknown
<6>[ 3.310681] Registered UART port ttyHS1
<6>[ 3.314658] tegra_uart.2: ttyHS2 at I/O 0x0 (irq = 78) is a unknown
<6>[ 3.470679] Registered UART port ttyHS2
<6>[ 3.474652] tegra_uart.3: ttyHS3 at I/O 0x0 (irq = 122) is a unknown
<6>[ 3.630680] Registered UART port ttyHS3
<6>[ 3.634653] tegra_uart.4: ttyHS4 at I/O 0x0 (irq = 123) is a unknown
<6>[ 3.790678] Registered UART port ttyHS4
<6>[ 3.794737] tegra_uart_init- #####
<6>[ 3.798212] Initialized tegra uart driver
<6>[ 3.804472] loop: module loaded
<4>[ 3.807866] i2c-core: driver [apds9802als] using legacy suspend method
<4>[ 3.814485] i2c-core: driver [apds9802als] using legacy resume method
<4>[ 3.821122] nct1008_probe+
<4>[ 3.823926] nct1008_power_control
<6>[ 3.827318] nct1008 4-004c: success in enabling rail vdd_nct1008
<6>[ 3.835702] nct1008 register misc device for I2C stress test rc=0
<6>[ 3.841955] nct1008 4-004c: nct1008_probe: initialized
<4>[ 3.921247] nct1008_get_temp: ret temp=26C
<4>[ 3.926344] nct1008_get_temp: ret temp=26C
<4>[ 3.930969] tegra_watchdog_enable timeout=45
<4>[ 3.935316] nct1008_probe-
<4>[ 3.938136] i2c-core: driver [nct1008] using legacy suspend method
<4>[ 3.944472] i2c-core: driver [nct1008] using legacy resume method
<6>[ 3.950646] bcm4329_rfkill_init+ #####
<4>[ 3.954610] bcm4329_rfkill_probe: can't find bcm4329_32k_clk. assuming 32k clock to chip
<4>[ 3.963042] bcm4329_rfkill_probe : can't find reset gpio.
<6>[ 3.968699] bcm4329_rfkill_init- #####
<6>[ 3.972533] mpu_init+ #####
<6>[ 3.975401] mpu_init- #####
<6>[ 3.978400] kxtf9_mod_init+ #####
<6>[ 3.981806] kxtf9_mod_init- #####
<6>[ 3.985193] ami306_mod_init+ #####
<6>[ 3.988741] ami306_mod_init- #####
<3>[ 3.992300] vibrator_init:Couldn't get regulator vdd_vbrtr
<6>[ 3.997911] Loading pn544 driver
<7>[ 4.001332] gpio_request: gpio-184 (nfc_int) status -16
<6>[ 4.006857] PPP generic driver version 2.4.2
<6>[ 4.011315] PPP Deflate Compression module registered
<6>[ 4.016510] PPP BSD Compression module registered
<6>[ 4.023016] PPP MPPE Compression module registered
<6>[ 4.027959] NET: Registered protocol family 24
<6>[ 4.032521] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
<6>[ 4.040070] tun: Universal TUN/TAP device driver, 1.6
<6>[ 4.045211] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
<6>[ 4.051696] usbcore: registered new interface driver asix
<6>[ 4.057198] usbcore: registered new interface driver cdc_ether
<6>[ 4.063225] usbcore: registered new interface driver smsc95xx
<6>[ 4.069071] usbcore: registered new interface driver cdc_subset
<6>[ 4.075148] cdc_ncm: 23-Apr-2011
<6>[ 4.078480] usbcore: registered new interface driver cdc_ncm
<6>[ 4.084296] asuspec_init+ #####
<5>[ 4.087513] asuspec: [asuspec_init] cdev_alloc
<6>[ 4.092222] Wake9 for irq=370
<6>[ 4.095339] Wake9 for irq=370
<6>[ 4.098451] Enabling wake9
<6>[ 4.101232] gpio bank wake found: wake9 for irq=87
<6>[ 4.106086] Enabling wake9
<5>[ 4.108976] asuspec: [asuspec_send_ec_req] send EC_Request
<4>[ 4.114590] i2c-core: driver [asuspec] using legacy suspend method
<4>[ 4.120925] i2c-core: driver [asuspec] using legacy resume method
<6>[ 4.127190] asuspec_init- #####
<6>[ 4.130407] asusdec_init+ #####
<5>[ 4.133707] asusdec: [asusdec_init] cdev_alloc
<3>[ 4.138394] power_supply dock_battery: driver failed to report `status' property
<3>[ 4.145988] power_supply dock_battery: driver failed to report `status' property
<6>[ 4.153613] input: lid_input as /devices/platform/tegra-i2c.1/i2c-1/1-0019/input/input0
<6>[ 4.161867] Wake28 for irq=374
<6>[ 4.165025] Wake28 for irq=374
<6>[ 4.168222] Enabling wake28
<5>[ 4.171123] asusdec: [asusdec_irq_hall_sensor] LID open
<6>[ 4.176443] Wake29 for irq=375
<6>[ 4.179670] Wake29 for irq=375
<6>[ 4.182797] Enabling wake29
<4>[ 4.185722] i2c-core: driver [asusdec] using legacy suspend method
<5>[ 4.185746] asusdec: [asusdec_dock_init_work_function] TF201 dock-init
<5>[ 4.185755] asusdec: [asusdec_dock_init_work_function] No dock detected
<4>[ 4.205387] i2c-core: driver [asusdec] using legacy resume method
<6>[ 4.211651] asusdec_init- #####
<6>[ 4.214941] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 4.221588] tegra_ehci_probe+ #####
<3>[ 4.229324] Timed out waiting for lock bit on pll pll_u
<6>[ 4.234495] phy->instance= 2 , phy->xcvr_setup_value=61
<5>[ 4.240695] asusdec: [asusdec_lid_report_function] SW_LID report value = 0
<6>[ 4.242601] tegra-ehci tegra-ehci.2: Tegra EHCI Host Controller
<6>[ 4.242720] tegra-ehci tegra-ehci.2: new USB bus registered, assigned bus number 1
<5>[ 4.261403] asusdec: [asusdec_pad_battery_report_function] dock_in = 0, ret_val = -1
<4>[ 4.269287] audio_dock_in_out: global_audio_codec is NULL
<5>[ 4.274768] asusdec: [asusAudiodec_in_out_work_function] audio dock out
<6>[ 4.320699] tegra-ehci tegra-ehci.2: irq 129, io mem 0x7d008000
<6>[ 4.340690] tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.00
<6>[ 4.346738] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 4.353683] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 4.360984] usb usb1: Product: Tegra EHCI Host Controller
<6>[ 4.366525] usb usb1: Manufacturer: Linux 2.6.39.4-cyanogenmod-g80ca3c6 ehci_hcd
<6>[ 4.373997] usb usb1: SerialNumber: tegra-ehci.2
<6>[ 4.379036] hub 1-0:1.0: USB hub found
<6>[ 4.382918] hub 1-0:1.0: 1 port detected
<7>[ 4.387227] gpio_request: gpio-164 (DOCK_IN) status -16
<3>[ 4.392572] DOCK_IN GPIO164 request fault!-16
<6>[ 4.397032] gpio_dock_in_irq_init: request irq = 388, ret = 0
<6>[ 4.402963] tegra_ehci_probe- #####
<6>[ 4.406706] usbcore: registered new interface driver cdc_acm
<6>[ 4.412555] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[ 4.421217] usbcore: registered new interface driver cdc_wdm
<6>[ 4.427047] Initializing USB Mass Storage driver...
<6>[ 4.432104] usbcore: registered new interface driver usb-storage
<6>[ 4.438280] USB Mass Storage support registered.
<6>[ 4.443065] usbcore: registered new interface driver libusual
<6>[ 4.449076] usbcore: registered new interface driver usbserial
<6>[ 4.455047] USB Serial support registered for generic
<6>[ 4.460309] usbcore: registered new interface driver usbserial_generic
<6>[ 4.466942] usbserial: USB Serial Driver core
<6>[ 4.471507] USB Serial support registered for GSM modem (1-port)
<6>[ 4.477694] usbcore: registered new interface driver option
<5>[ 4.483451] asuspec: [asuspec_chip_init] Model Name: ASUS-TF201-PAD
<6>[ 4.489824] option: v0.7.2:USB Driver for GSM modems
<6>[ 4.495003] USB Serial support registered for pl2303
<5>[ 4.500061] asuspec: [asuspec_chip_init] EC-FW Version: PAD-EC20T-0216
<6>[ 4.506796] usbcore: registered new interface driver pl2303
<6>[ 4.512475] pl2303: Prolific PL2303 USB to serial adaptor driver
<6>[ 4.518682] USB Serial support registered for Qualcomm USB modem
<6>[ 4.524851] usbcore: registered new interface driver qcserial
<5>[ 4.530777] asuspec: [asuspec_chip_init] PCBA Version: TF201-PAD-SKU1
<6>[ 4.537302] NVidia Tegra High-Speed USB SOC Device Controller driver (Apr 20, 2007)
<7>[ 4.545135] gpio_request: gpio-164 (DOCK_IN) status -16
<3>[ 4.550533] DOCK_IN GPIO164 request fault!-16
<5>[ 4.554986] asuspec: [asuspec_enter_normal_mode] Entering normal mode
<6>[ 4.561601] gpio_limit_set1_irq_init: request irq = 285, ret = 0
<6>[ 4.567805] fsl_udc_probe()
<5>[ 4.570710] asuspec: [asuspec_work_function] 0x1 0x0 0xff 0xff
<6>[ 4.576805] phy->instance= 0 , phy->xcvr_setup_value=61
<3>[ 4.582298] fsl-tegra-udc fsl-tegra-udc: can't get charge regulator,err:-19
<6>[ 4.589463] tegra-otg tegra-otg: SUSPEND --> PERIPHERAL
<6>[ 4.594779] fsl_vbus_session, vbus_active=0, is_active=1
<6>[ 4.600360] android init
<3>[ 4.603191] pid != TF300TG, cancel acm ports
<3>[ 4.607535] pid != TF300TL, cancel serial ports
<4>[ 4.612572] Gadget Android: controller 'fsl-tegra-udc' not recognized
<6>[ 4.619088] android_usb gadget: android_usb ready
<6>[ 4.623965] fsl-tegra-udc: bind to driver android_usb
<7>[ 4.629214] gpio_set_debounce: gpio-168 status -22
<6>[ 4.634166] Wake24 for irq=392
<6>[ 4.637457] input: gpio-keys as /devices/platform/gpio-keys.0/input/input1
<6>[ 4.644481] gpio_keys: Reported pressed KEY_POWER
<6>[ 4.649266] gpio_keys: Released KEY_POWER
<6>[ 4.700842] Wake17 for irq=117
<6>[ 4.704170] input: tegra-kbc as /devices/platform/tegra-kbc/input/input2
<6>[ 4.711106] usbcore: registered new interface driver xpad
<6>[ 4.716647] mxt_init+ #####
<6>[ 4.719570] mxt_init- #####
<6>[ 4.722457] [elan] elan_ktf3k_ts_init
<6>[ 4.726269] elan-ktf3k 1-0010: [ELAN] Start HW reset!
<6>[ 4.790679] cable_detection_work_handler, vbus_active=0, is_active=1
<6>[ 4.797104] The USB cable is connected (0.5A)
<4>[ 4.810673] ========================================================
<4>[ 4.817096] battery_callback usb_cable_state =1
<4>[ 4.840670] ========================================================
<4>[ 4.847092] battery_callback battery driver not ready
<4>[ 4.852297] Touch charger state: 1
<7>[ 5.017939] [elan] GPIO_TP_INT_N=60
<6>[ 5.021511] elan-ktf3k 1-0010: The boot code is new!
<6>[ 5.767576] elan-ktf3k 1-0010: [elan] __hello_packet_handler: hello packet 55:55:55:55
<6>[ 5.775646] elan-ktf3k 1-0010: [elan] hello packet's rc = 0
<6>[ 5.970678] mpu_delay_init+ #####
<6>[ 5.974093] mpu_probe+ #####
<6>[ 5.977123] i2c i2c-2: mpu_probe: 0
<6>[ 5.991065] elan-ktf3k 1-0010: [elan] __fw_packet_handler: firmware version: 0x7053
<6>[ 5.999224] elan-ktf3k 1-0010: [elan] __fw_packet_handler: X resolution: 0x0000
<6>[ 6.006627] kxtf9_mod_delay_init+ #####
<6>[ 6.010970] elan-ktf3k 1-0010: [elan] __fw_packet_handler: Y resolution: 0x0000
<6>[ 6.018703] elan-ktf3k 1-0010: [elan] __fw_packet_handler: firmware id: 0x3024
<6>[ 6.026114] ami306_mod_delay_init+ #####
<6>[ 6.030183] elan-ktf3k 1-0010: [Elan] Max X=2944, Max Y=1856
<6>[ 6.036162] input: elan-touchscreen as /devices/virtual/input/input3
<4>[ 6.042776] /proc/ektf_dbg created
<6>[ 6.046622] elan-ktf3k 1-0010: [elan] Start touchscreen elan-touchscreen in interrupt mode
<4>[ 6.055070] [ELAN]misc_register finished!!
<6>[ 6.059171] elan-ktf3k 1-0010: Update power source to 2
<6>[ 6.067290] i2c i2c-2: Installing irq using 409
<6>[ 6.071923] i2c i2c-2: Module Param interface = mpuirq
<6>[ 6.077306] mpu_probe- #####
<6>[ 6.080288] i2c i2c-2: kxtf9_mod_probe: kxtf9
<6>[ 6.084809] i2c i2c-2: inv_mpu_register_slave: +kxtf9 Type 1: Addr: f IRQ: 341, Adapt: 2
<6>[ 6.093196] mpu_delay_init: Probe name mpu3050
<6>[ 6.097781] mpu_delay_init- #####
<6>[ 6.101185] kxtf9_init+ #####
<6>[ 6.112940] rtc_tps6591x rtc_tps6591x.0: RTC Time : 1/20/2000 15:38:11
<6>[ 6.120682] kxtf9_init- #####
<6>[ 6.123744] tps6591x 4-002d:
<6>[ 6.123747] getting alarm time::
<6>[ 6.130241] rtc_tps6591x rtc_tps6591x.0: RTC Time : 1/1/1900 0:0:0
<6>[ 6.136506] i2c i2c-2: Installing accelirq irq using 341
<6>[ 6.141972] Wake0 for irq=341
<6>[ 6.145131] i2c i2c-2: ami306_mod_probe: ami306
<6>[ 6.149742] i2c i2c-2: inv_mpu_register_slave: +ami306 Type 2: Addr: e IRQ: 400, Adapt: 2
<6>[ 6.158302] kxtf9_mod_delay_init: Probe name kxtf9_mod
<6>[ 6.163549] ami306_init+ #####
<6>[ 6.168698] rtc_tps6591x rtc_tps6591x.0: RTC Time : 1/20/2000 15:38:11
<6>[ 6.175537] using rtc device, rtc_tps6591x, for alarms
<6>[ 6.180661] rtc_tps6591x rtc_tps6591x.0: rtc core: registered rtc_tps6591x as rtc0
<6>[ 6.191722] rtc_tps6591x rtc_tps6591x.0: RTC Time : 1/20/2000 15:38:11
<6>[ 6.320823] i2c /dev entries driver
<6>[ 6.324749] Linux video capture interface: v2.00
<6>[ 6.329590] usbcore: registered new interface driver uvcvideo
<6>[ 6.335437] USB Video Class driver (v1.0.0)
<6>[ 6.339867] trpc_sema_init: registered misc dev 10:44
<6>[ 6.345900] trpc_node_register: Adding 'local' to node list
<6>[ 6.353611] nvavp nvavp: allocated IOVM at ff00000 for AVP os
<6>[ 6.359722] tegra_camera tegra_camera: tegra_camera_probe
<6>[ 6.365729] yuv fjm6mo sensor_init+ #####
<6>[ 6.659354] ami306_init- #####
<6>[ 6.662509] i2c i2c-2: Installing compassirq irq using 400
<6>[ 6.668289] yuv sensor_probe, compiled at Sep 14 2012 09:15:13
<4>[ 6.674272] yuv_sensor_power_on+
<6>[ 6.677584] gpio 143 set to 0
<6>[ 6.680756] ami306_mod_delay_init: Probe name ami306_mod
<6>[ 6.686140] ami306_mod_delay_init- #####
<7>[ 6.690154] gpio_request: gpio-143 (isp_power_1v2_en) status -16
<3>[ 6.696240] yuv_sensor_power_on_TF700T: gpio_request failed for gpio TF700T_ISP_POWER_1V2_EN_GPIO
<6>[ 6.705259] gpio 143 set to 1
<6>[ 6.708302] gpio 223 set to 0
<6>[ 6.711356] gpio 223 set to 1
<4>[ 6.731210] camera mclock on
<4>[ 6.734189] -tegra_camera_mclk_on_off
<6>[ 6.737922] gpio 216 set to 0
<6>[ 6.740976] gpio 216 set to 1
<4>[ 6.744089] yuv_sensor_power_on -
<6>[ 6.763793] fjm6mo check version number 0xb03400 1
<4>[ 6.768653] yuv_sensor_power_off+
<6>[ 6.772127] gpio 216 set to 0
<4>[ 6.775172] -tegra_camera_mclk_on_off
<6>[ 6.779054] gpio 223 set to 0
<6>[ 6.782181] gpio 143 set to 0
<4>[ 6.785218] yuv_sensor_power_off-
<6>[ 6.788647] yuv fjm6mo sensor_init- #####
<6>[ 6.792742] sensor_init+ #####
<6>[ 6.795965] yuv sensor_probe
<6>[ 6.799055] sensor_init- #####
<4>[ 6.802225] pad_probe: client->addr=b
<4>[ 6.806201] pad_get_psp: pad_device->battery_present=0
<3>[ 6.811427] pad-battery 4-000b: pad_get_psp: i2c read for 7 failed
<3>[ 6.817748] power_supply battery: driver failed to report `status' property
<4>[ 6.824821] pad_get_psp: pad_device->battery_present=0
<3>[ 6.830104] pad-battery 4-000b: pad_get_psp: i2c read for 7 failed
<6>[ 6.836560] pad-battery 4-000b: pad-battery: battery driver registered
<3>[ 6.843260] power_supply battery: driver failed to report `status' property
<6>[ 6.850394] Wake26 for irq=373
<6>[ 6.853654] The USB cable status = 1
<4>[ 6.857334] setup_irq: battery_present =1
<6>[ 6.861693] Wake25 for irq=372
<6>[ 6.864921] Wake25 for irq=372
<6>[ 6.868047] Enabling wake25
<4>[ 6.870921] setup_low_battery_irq:low_battery_present=0
<6>[ 6.876446] battery register misc device for I2C stress test rc=0
<4>[ 6.882663] i2c-core: driver [pad-battery] using legacy suspend method
<4>[ 6.889332] i2c-core: driver [pad-battery] using legacy resume method
<6>[ 6.895936] al3010_init+ #####
<4>[ 6.899064] light sensor info : al3010 init
<4>[ 6.903530] light sensor info : al3010 probe successed
<6>[ 6.908735] al3010 2-001c: driver version 1.0 enabled
<4>[ 6.914089] i2c-core: driver [al3010] using legacy suspend method
<4>[ 6.920253] i2c-core: driver [al3010] using legacy resume method
<6>[ 6.926438] al3010_init- #####
<6>[ 6.929657] device-mapper: uevent: version 1.0.3
<6>[ 6.934484] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
<6>[ 6.943020] Bluetooth: HCI UART driver ver 2.2
<6>[ 6.947611] Bluetooth: HCI H4 protocol initialized
<6>[ 6.952481] Bluetooth: HCILL protocol initialized
<6>[ 6.957257] Bluetooth: BlueSleep Mode Driver Ver 1.1
<6>[ 6.962371] bluesleep_init+ #####
<6>[ 6.965808] Wake7 for irq=390
<6>[ 6.968917] bluesleep_init- #####
<6>[ 6.972870] cpuidle: using governor ladder
<6>[ 6.977303] cpuidle: using governor menu
<6>[ 6.981343] sdhci: Secure Digital Host Controller Interface driver
<6>[ 6.987662] sdhci: Copyright(c) Pierre Ossman
<6>[ 6.992094] sdhci_drv_init+ #####
<6>[ 6.995621] [mmc]:tegra_sdhci_pltfm_init:914 mmc0: built_in 1
<6>[ 7.002232] sdhci sdhci-tegra.3: Error: tegra3 io dpd not supported for sdhci-tegra.3
<4>[ 7.011219] mmc0: Invalid maximum block size, assuming 512 bytes
<6>[ 7.017315] mmc0: no vmmc regulator found
<4>[ 7.021484] ========================================================
<6>[ 7.021588] tegra_usb_suspend+
<6>[ 7.021594] tegra->phy->instance=2
<6>[ 7.021599] tegra_usb_suspend: before ehci_halt
<6>[ 7.021606] tegra_usb_suspend: after ehci_halt, ret = 0
<6>[ 7.021625] tegra_usb_suspend-
<6>[ 7.050945] [mmc]:mmc_detect_change:1394 mmc0: gpio_69:0
<6>[ 7.056331] [mmc]:mmc_schedule_delayed_work:88 mmc0: delay 0
<6>[ 7.062156] mmc0: SDHCI controller on platform [sdhci-tegra.3] using ADMA
<6>[ 7.062167] [mmc]:mmc_rescan:1812 mmc0: gpio_69:0 rescan_disable 0
<4>[ 7.063289] docking_callback 1 docking_in =0 pu4=1
<4>[ 7.063294] ========================================================
<4>[ 7.063301] disable_irq(gpio_to_irq(TEGRA_GPIO_PS5)
<5>[ 7.063309] asusdec: [asusdec_pad_battery_report_function] dock_in = 0, ret_val = 0
<6>[ 7.099621] sdhci sdhci-tegra.2: Error: tegra3 io dpd not supported for sdhci-tegra.2
<4>[ 7.111980] mmc1: Invalid maximum block size, assuming 512 bytes
<6>[ 7.118087] mmc1: no vmmc regulator found
<4>[ 7.128944] mmc1 clock request: 101KHz. currently 48000KHz
<4>[ 7.139558] mmc1 clock request: 0KHz. currently 48000KHz
<6>[ 7.145039] [mmc]:mmc_detect_change:1394 mmc1: gpio_69:0
<6>[ 7.150422] [mmc]:mmc_schedule_delayed_work:88 mmc1: delay 0
<6>[ 7.156239] mmc1: SDHCI controller on platform [sdhci-tegra.2] using ADMA
<6>[ 7.156250] [mmc]:mmc_rescan:1812 mmc1: gpio_69:0 rescan_disable 0
<4>[ 7.157313] mmc1 clock request: 101KHz. currently 48000KHz
<4>[ 7.157330] mmc1 clock request: 0KHz. currently 48000KHz
<4>[ 7.170713] mmc1 clock request: 400KHz. currently 48000KHz
<6>[ 7.188085] Wake23 for irq=293
<6>[ 7.199411] Wake23 for irq=293
<6>[ 7.202540] Enabling wake23
<6>[ 7.205404] gpio bank wake found: wake23 for irq=66
<6>[ 7.210421] Enabling wake23
<6>[ 7.219353] [mmc]:tegra_sdhci_pltfm_init:869 mmc2: non-built_in 0
<6>[ 7.242402] [mmc]:mmc_decode_cid:111 cid.prv 0x6f
<6>[ 7.245879] sdhci sdhci-tegra.0: Error: tegra3 io dpd not supported for sdhci-tegra.0
<4>[ 7.246898] mmc2: Invalid maximum block size, assuming 512 bytes
<6>[ 7.246921] mmc2: no vmmc regulator found
<6>[ 7.247999] [mmc]:mmc_power_off:1242 mmc2:vdd_slot_reg: use_count 1
<6>[ 7.248007] [mmc]:mmc_power_off:1245 mmc2:vdd_io_reg: use_count 0
<6>[ 7.250232] [mmc]:mmc_detect_change:1394 mmc2: gpio_69:0
<6>[ 7.250239] [mmc]:mmc_schedule_delayed_work:88 mmc2: delay 0
<6>[ 7.250263] mmc2: SDHCI controller on platform [sdhci-tegra.0] using ADMA
<6>[ 7.250313] sdhci_drv_init- #####
<6>[ 7.251694] tegra-se tegra-se: tegra_se_probe: complete
<6>[ 7.252042] usbcore: registered new interface driver usbhid
<6>[ 7.252047] usbhid: USB HID core driver
<6>[ 7.252316] logger: created 256K log 'log_main'
<6>[ 7.252372] logger: created 256K log 'log_events'
<6>[ 7.252436] logger: created 256K log 'log_radio'
<6>[ 7.252494] logger: created 256K log 'log_system'
<6>[ 7.252633] RIL: [ril_init] RIL init
<3>[ 7.252640] RIL: [ril_init] Ril driver doesn't support this project
<4>[ 7.303421] mmc1 clock request: 0KHz. currently 48000KHz
<4>[ 7.304483] mmc1 clock request: 101KHz. currently 48000KHz
<4>[ 7.304499] mmc1 clock request: 0KHz. currently 48000KHz
<4>[ 7.320716] mmc1 clock request: 300KHz. currently 48000KHz
<6>[ 7.376947] [mmc]:mmc_read_ext_csd:259 ext_csd.sectors 0x3b34000 prod_name HYNIX BOOT_SIZE_MULTI 0x10
<4>[ 7.385331] mmc1 clock request: 0KHz. currently 48000KHz
<4>[ 7.386393] mmc1 clock request: 101KHz. currently 48000KHz
<4>[ 7.386412] mmc1 clock request: 0KHz. currently 48000KHz
<4>[ 7.400717] mmc1 clock request: 200KHz. currently 48000KHz
<4>[ 7.431478] mmc0: switch to bus width 1 ddr 0 failed
<3>[ 7.437548] mmc0: error -110 whilst initialising MMC card
<4>[ 7.485362] mmc1 clock request: 0KHz. currently 48000KHz
<4>[ 7.490840] mmc1 clock request: 101KHz. currently 48000KHz
<4>[ 7.498505] mmc1 clock request: 0KHz. currently 48000KHz
<4>[ 7.530738] mmc1 clock request: 101KHz. currently 48000KHz
<6>[ 7.574598] [mmc]:mmc_decode_cid:111 cid.prv 0x6f
<6>[ 7.605782] [mmc]:mmc_read_ext_csd:259 ext_csd.sectors 0x3b34000 prod_name HYNIX BOOT_SIZE_MULTI 0x10
<4>[ 7.618292] mmc1 clock request: 0KHz. currently 48000KHz
<6>[ 7.623699] [mmc]:mmc_rescan:1897 mmc1: extend_wakelock 0
<4>[ 7.648918] mmc0: switch to bus width 1 ddr 0 failed
<3>[ 7.655010] mmc0: error -110 whilst initialising MMC card
<6>[ 7.763997] [mmc]:mmc_decode_cid:111 cid.prv 0x6f
<6>[ 7.791113] [mmc]:mmc_read_ext_csd:259 ext_csd.sectors 0x3b34000 prod_name HYNIX BOOT_SIZE_MULTI 0x10
<4>[ 7.820391] mmc0: switch to bus width 1 ddr 0 failed
<3>[ 7.825463] mmc0: error -110 whilst initialising MMC card
<6>[ 7.851038] rt5631_modinit+ #####
<4>[ 7.854426] codec_3v3_power_switch_init
<7>[ 7.858335] gpio_request: gpio-120 (rt5631_3v3_power_control) status -16
<4>[ 7.865258] rt5631_3v3_power_control: request rt5631_3v3_power_control fail! : -16
<4>[ 7.873006] rt5631_i2c_probe+
<6>[ 7.876039] RT5631 Audio Codec 0.01 alsa 1.0.24
<4>[ 7.880763] rt5631_i2c_probe-
<6>[ 7.885966] rt5631_modinit- #####
<6>[ 7.895412] tegra_rt5631_modinit+ #####
<4>[ 7.901370] tegra_rt5631_modinit(): support codec rt5631
<4>[ 7.908875] tegra_rt5631_driver_probe+
<6>[ 7.977245] [mmc]:mmc_decode_cid:111 cid.prv 0x6f
<6>[ 8.006198] RT5631 initial ok!
<4>[ 8.009390] ************************realtek_ce_init_hwdep*************************************
<4>[ 8.018387] tegra_rt5631_init+
<3>[ 8.021977] rt5631 4-001a: asoc: failed to add dapm kcontrol AXO2MIX Mixer OUTVOLL Playback Switch: -16
<6>[ 8.031555] [mmc]:mmc_read_ext_csd:259 ext_csd.sectors 0x3b34000 prod_name HYNIX BOOT_SIZE_MULTI 0x10
<6>[ 8.047398] asoc: rt5631-hifi <-> tegra30-i2s.1 mapping ok
<6>[ 8.053672] asoc: dit-hifi <-> tegra30-spdif mapping ok
<4>[ 8.075286] mmc0: switch to bus width 1 ddr 0 failed
<3>[ 8.080416] mmc0: error -110 whilst initialising MMC card
<4>[ 8.086351] tegra_rt5631_driver_probe-
<6>[ 8.090290] tegra_rt5631_modinit- #####
<6>[ 8.094216] tegra_wm8903_modinit+ #####
<4>[ 8.098124] tegra_wm8903_modinit(): not support codec wm8903
<6>[ 8.106040] [mmc]:mmc_rescan:1897 mmc0: extend_wakelock 0
<6>[ 8.111527] [mmc]:mmc_rescan:1812 mmc2: gpio_69:0 rescan_disable 0
<6>[ 8.118922] headset_init+ #####
<4>[ 8.122150] HEADSET: Headset detection init
<4>[ 8.126556] HEADSET: Headset detection mode
<6>[ 8.130902] [mmc]:mmc_power_up:1194 mmc2:vdd_io_reg: use_count 0
<6>[ 8.136977] [mmc]:mmc_power_up:1197 mmc2:vdd_slot_reg: use_count 0
<4>[ 8.143308] HEADSET: Config Headset Button detection gpio
<7>[ 8.148776] gpio_request: gpio-186 (btn_INT) status -16
<4>[ 8.154196] HEADSET: Config Jack-in detection gpio
<4>[ 8.159337] HEADSET: Turn on micbias power
<6>[ 8.164461] Wake12 for irq=402
<6>[ 8.167672] Wake12 for irq=402
<6>[ 8.170798] Enabling wake12
<6>[ 8.173665] gpio bank wake found: wake12 for irq=119
<6>[ 8.178768] Enabling wake12
<4>[ 8.210202] HEADSET: Turn off micbias power
<4>[ 8.215869] HEADSET: Config LineOut detection gpio
<6>[ 8.222887] headset_init- #####
<6>[ 8.226124] fm34_init+ #####
<6>[ 8.229098] fm34_init()
<6>[ 8.231859] fm34: [fm34_chip_init] GPIO = 115 , state = 1
<6>[ 8.237332] fm34: [fm34_chip_init] GPIO = 222 , state = 1
<4>[ 8.381684] mmc2: host does not support reading read-only switch. assuming write-enable.
<6>[ 8.391975] mmc2: new high speed SD card at address 1234
<6>[ 8.397792] mmcblk0: mmc2:1234 SA02G 1.85 GiB
<6>[ 8.402593] fm34_probe()
<6>[ 8.405247] fm34_init- #####
<6>[ 8.408274] ALSA device list:
<6>[ 8.411348] fm34: [fm34_reconfig] ReConfigure DSP
<6>[ 8.416262] #0: HDA NVIDIA Tegra at 0x70038000 irq 113
<6>[ 8.421732] #1: tegra-codec
<6>[ 8.425025] oprofile: using arm/armv7-ca9
<6>[ 8.429224] GACT probability NOT on
<6>[ 8.432894] fm34: [fm34_reset_DSP] GPIO = 115 , state = 0
<6>[ 8.438366] fm34: [fm34_reset_DSP] GPIO = 115 , state = 1
<6>[ 8.444028] Mirror/redirect action on
<6>[ 8.447803] u32 classifier
<6>[ 8.450831] Actions configured
<6>[ 8.454349] Netfilter messages via NETLINK v0.30.
<6>[ 8.459281] mmcblk0: p1
<6>[ 8.462265] [mmc]:mmc_rescan_try_freq:1790 mmc2: SD completed
<6>[ 8.468163] [mmc]:mmc_rescan:1897 mmc2: extend_wakelock 1
<6>[ 8.473719] nf_conntrack version 0.5.0 (15611 buckets, 62444 max)
<6>[ 8.480262] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[ 8.487322] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 8.493467] xt_time: kernel timezone is -0000
<6>[ 8.498066] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 8.503691] arp_tables: (C) 2002 David S. Miller
<6>[ 8.508429] TCP cubic registered
<6>[ 8.511845] NET: Registered protocol family 10
<6>[ 8.517359] Mobile IPv6
<6>[ 8.519907] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 8.525406] IPv6 over IPv4 tunneling driver
<6>[ 8.530619] NET: Registered protocol family 17
<6>[ 8.535179] NET: Registered protocol family 15
<6>[ 8.539806] Bluetooth: RFCOMM TTY layer initialized
<6>[ 8.544847] Bluetooth: RFCOMM socket layer initialized
<6>[ 8.550056] Bluetooth: RFCOMM ver 1.11
<6>[ 8.554026] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 8.559411] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 8.565618] NET: Registered protocol family 37
<6>[ 8.570135] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
<5>[ 8.578087] Registering SWP/SWPB emulation handler
<6>[ 8.583243] fm34: [fm34_config_DSP] DSP ACK, read 0xc0: 1
<6>[ 8.588875] fm34: [fm34_config_DSP] Load TF201 DSP parameters
<4>[ 8.602196] Disabling clocks left on by bootloader:
<4>[ 8.607231] uarta
<4>[ 8.609506] fuse_burn
<4>[ 8.612210] cclk_lp
<4>[ 8.614649] pll_x_out0
<4>[ 8.617352] pll_d2_out0
<4>[ 8.620211] pll_p_out2
<4>[ 8.622924] pll_c_out1
<4>[ 8.625623] pll_m_out1
<6>[ 8.628422] CPU rate: 1150 MHz
<4>[ 8.632514] tegra3_dvfs: minimum cap.cbus rate 247000000 requires 1000 mV
<4>[ 8.639264] tegra3_dvfs: minimum cap.emc rate 400000000 requires 1000 mV
<6>[ 8.646242] tegra dvfs: tegra sysfs cap interface is initialized
<6>[ 8.652798] tegra_actmon.emc: Completed initialization (0)
<6>[ 8.658697] tegra_actmon.avp: Completed initialization (0)
<4>[ 8.665547] [DHD] ## wifi_probe
<4>[ 8.668841] [DHD] wifi_set_power = 1
<6>[ 8.790679] fm34: [fm34_config_DSP] config_length = 1497
<6>[ 8.796085] fm34: [fm34_config_DSP] DSP configuration is done
<4>[ 8.940685] tegra_watchdog_touch
<4>[ 8.944478] nct1008_get_temp: ret temp=27C
<4>[ 8.948923] Reg Status Reg 0x02 Value 0x80
<4>[ 8.954644] Reg Configuration Reg 0x03 Value 0x04
<4>[ 8.977295] [DHD] wifi_set_carddetect = 1
<6>[ 8.981487] [mmc]:mmc_detect_change:1394 mmc1: gpio_69:0
<6>[ 8.986867] [mmc]:mmc_schedule_delayed_work:88 mmc1: delay 0
<6>[ 8.992721] [mmc]:mmc_rescan:1812 mmc1: gpio_69:0 rescan_disable 0
<4>[ 8.992797] [DHD]
<4>[ 8.992800] Dongle Host Driver, version 5.90.125.94.1
<4>[ 8.992803] Compiled in drivers/net/wireless/bcmdhd on Sep 14 2012 at 09:15:57
<4>[ 9.014703] mmc1 clock request: 101KHz. currently 48000KHz
<4>[ 9.020296] mmc1 clock request: 0KHz. currently 48000KHz
<4>[ 9.040711] mmc1 clock request: 400KHz. currently 48000KHz
<4>[ 9.072807] mmc1 clock request: 50000KHz. currently 48000KHz
<6>[ 9.080855] mmc1: new high speed SDIO card at address 0001
<4>[ 9.087203] [DHD] bcmdhd: fw_path: /system/vendor/firmware/bcm4330/fw_bcmdhd.bin nvram_path: /system/etc/nvram_4330.txt
<4>[ 9.098272] [DHD] F1 signature read @0x18000000=0x16044330
<4>[ 9.104077] [DHD] sih->chiprev = 4
<4>[ 9.107618] [DHD] BCM4330B2 found!
<4>[ 9.114670] [DHD] DHD: dongle ram size is set to 294912(orig 294912)
<4>[ 9.121768] wl_create_event_handler thr:66 started
<4>[ 9.126832] dhd_attach thr:67 started
<4>[ 9.130631] dhd_attach thr:68 started
<4>[ 9.134545] dhd_attach thr:69 started
<4>[ 9.138992] [DHD] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
<4>[ 9.148044] [DHD] wifi_set_power = 0
<6>[ 9.156147] [mmc]:mmc_rescan_try_freq:1785 mmc1: sdio completed
<6>[ 9.162231] [mmc]:mmc_rescan:1897 mmc1: extend_wakelock 1
<4>[ 9.452007] [DHD] =========== WLAN placed in RESET ========
<6>[ 9.460044] rtc_tps6591x rtc_tps6591x.0: RTC Time : 1/20/2000 15:38:14
<6>[ 9.466699] rtc_tps6591x rtc_tps6591x.0: setting system clock to 2000-01-20 15:38:14 UTC (948382694)
<6>[ 9.476450] Freeing init memory: 232K
<3>[ 9.483133] init: /init.rc: 40: invalid option ' disabled'
<4>[ 9.499157] pad_get_psp val->intval=Full ret=e0
<4>[ 9.516425] pad_get_psp voltage_now =8222
<4>[ 9.523117] pad_get_capacity val->intval=100 ret=100
<4>[ 9.530984] pad_get_psp batttery temperature=214
<3>[ 9.538905] power_supply dock_battery: driver failed to report `status' property
<5>[ 10.537066] asuspec: [asuspec_enter_s3_work_function] EC in S3
<6>[ 12.070678] charger_pad_dock_detection:0 dock_in_value=1 charger_pad_dock_value =0
<5>[ 12.270718] asuspec: [asuspec_send_ec_req] send EC_Request
<4>[ 12.276358] battery_status_poll 120 1
<5>[ 12.344354] asuspec: [asuspec_work_function] 0x2 0x81 0x50 0xff
<5>[ 12.350417] asuspec: [asuspec_smi] ASUSPEC_SMI_HANDSHAKING
<4>[ 12.543902] pad_get_psp val->intval=Full ret=e0
<4>[ 12.561136] pad_get_psp voltage_now =8236
<4>[ 12.568054] pad_get_capacity val->intval=100 ret=100
<4>[ 12.576090] pad_get_psp batttery temperature=214
<5>[ 13.577972] asuspec: [asuspec_enter_s3_work_function] EC in S3
<4>[ 13.960684] tegra_watchdog_touch
<4>[ 13.964553] nct1008_get_temp: ret temp=27C
<4>[ 13.969061] Reg Status Reg 0x02 Value 0x80
<4>[ 13.974726] Reg Configuration Reg 0x03 Value 0x04
<3>[ 14.015807] init: Unable to open persistent property directory /data/property errno: 2
<3>[ 14.026231] android_usb: already disabled
<6>[ 14.029719] warning: `adbd' uses 32-bit capabilities (legacy support in use)
<6>[ 14.029857] adb_open(adbd)
<6>[ 14.040886] adb_bind_config
<3>[ 14.041028] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
<6>[ 14.041331] adb_bind_config
<6>[ 14.041375] adb_release
<6>[ 14.042658] adb_open(adbd)
<4>[ 14.077748] Check cardhu_panel_disable in TF202
<6>[ 14.186501] android_work: did not send uevent (0 0 (null))
<4>[ 14.201093] Disp: diff_msec= 123
<6>[ 14.343013] android_work: sent uevent USB_STATE=CONNECTED
<6>[ 14.346658] android_work: sent uevent USB_STATE=DISCONNECTED
<6>[ 14.544938] android_work: sent uevent USB_STATE=CONNECTED
<4>[ 15.090773] Check cardhu_panel_enable
<4>[ 15.090782] Check panel is panasonic
<4>[ 15.120686] Check power on/off for bridge IC
<4>[ 15.120693] Check enable TF301_1.8V
<4>[ 15.130708] Check enable TF301_I2C_Switch
<4>[ 15.140724] Check enable TF301_OSC
<4>[ 15.161105] Check tegra_dc_rgb_enable
<4>[ 15.161111] Check set polarity
<4>[ 15.161815] Check Chip ID=44
<4>[ 15.161819] Check RevID=0
<6>[ 15.161824] DISPLAY_write_table display_write_table
<4>[ 15.235429] ========================
<4>[ 15.235434] ========================
<4>[ 15.235439] Check start to read register
<4>[ 15.235444] Panel is panasonic
<6>[ 15.919934] set_config : usb set config wake lock ++
<6>[ 15.925263] android_usb gadget: high speed config #1: android
<6>[ 15.931323] android_work: sent uevent USB_STATE=CONFIGURED
<4>[ 18.980699] tegra_watchdog_touch
<4>[ 18.984603] nct1008_get_temp: ret temp=27C
<4>[ 18.989046] Reg Status Reg 0x02 Value 0x80
<4>[ 18.994716] Reg Configuration Reg 0x03 Value 0x04
<4>[ 20.275711] adbd (124): /proc/124/oom_adj is deprecated, please use /proc/124/oom_score_adj instead.
<4>[ 24.000697] tegra_watchdog_touch
<4>[ 24.004523] nct1008_get_temp: ret temp=27C
<4>[ 24.008970] Reg Status Reg 0x02 Value 0x80
<4>[ 24.014715] Reg Configuration Reg 0x03 Value 0x04
<4>[ 29.020714] tegra_watchdog_touch
<4>[ 29.024695] nct1008_get_temp: ret temp=27C
<4>[ 29.029142] Reg Status Reg 0x02 Value 0x80
<4>[ 29.034817] Reg Configuration Reg 0x03 Value 0x04
<4>[ 34.040701] tegra_watchdog_touch
<4>[ 34.044545] nct1008_get_temp: ret temp=27C
<4>[ 34.048991] Reg Status Reg 0x02 Value 0x80
<4>[ 34.054678] Reg Configuration Reg 0x03 Value 0x04
<4>[ 39.060694] tegra_watchdog_touch
<4>[ 39.064593] nct1008_get_temp: ret temp=27C
<4>[ 39.069044] Reg Status Reg 0x02 Value 0x80
<4>[ 39.074788] Reg Configuration Reg 0x03 Value 0x04
<4>[ 44.080698] tegra_watchdog_touch
<4>[ 44.084517] nct1008_get_temp: ret temp=28C
<4>[ 44.089027] Reg Status Reg 0x02 Value 0x80
<4>[ 44.094696] Reg Configuration Reg 0x03 Value 0x04
<4>[ 49.100696] tegra_watchdog_touch
<4>[ 49.104519] nct1008_get_temp: ret temp=28C
<4>[ 49.108954] Reg Status Reg 0x02 Value 0x80
<4>[ 49.114720] Reg Configuration Reg 0x03 Value 0x04
<4>[ 54.120690] tegra_watchdog_touch
<4>[ 54.124585] nct1008_get_temp: ret temp=28C
<4>[ 54.129018] Reg Status Reg 0x02 Value 0x00
<4>[ 54.134709] Reg Configuration Reg 0x03 Value 0x04
<4>[ 59.140691] tegra_watchdog_touch
<4>[ 59.144511] nct1008_get_temp: ret temp=28C
<4>[ 59.149021] Reg Status Reg 0x02 Value 0x80
<4>[ 59.154710] Reg Configuration Reg 0x03 Value 0x04
<4>[ 64.160705] tegra_watchdog_touch
<4>[ 64.164619] nct1008_get_temp: ret temp=28C
<4>[ 64.169057] Reg Status Reg 0x02 Value 0x80
<4>[ 64.174818] Reg Configuration Reg 0x03 Value 0x04
<4>[ 69.180702] tegra_watchdog_touch
<4>[ 69.184526] nct1008_get_temp: ret temp=28C
<4>[ 69.189034] Reg Status Reg 0x02 Value 0x00
<4>[ 69.194725] Reg Configuration Reg 0x03 Value 0x04
<4>[ 74.200693] tegra_watchdog_touch
<4>[ 74.204512] nct1008_get_temp: ret temp=28C
<4>[ 74.208948] Reg Status Reg 0x02 Value 0x80
<4>[ 74.214709] Reg Configuration Reg 0x03 Value 0x04
<4>[ 79.220694] tegra_watchdog_touch
<4>[ 79.224584] nct1008_get_temp: ret temp=28C
<4>[ 79.229018] Reg Status Reg 0x02 Value 0x80
<4>[ 79.234689] Reg Configuration Reg 0x03 Value 0x04
<4>[ 84.240690] tegra_watchdog_touch
<4>[ 84.244515] nct1008_get_temp: ret temp=28C
<4>[ 84.249021] Reg Status Reg 0x02 Value 0x80
<4>[ 84.254689] Reg Configuration Reg 0x03 Value 0x04
<4>[ 89.260686] tegra_watchdog_touch
<4>[ 89.264638] nct1008_get_temp: ret temp=28C
<4>[ 89.269080] Reg Status Reg 0x02 Value 0x80
<4>[ 89.274819] Reg Configuration Reg 0x03 Value 0x04
<4>[ 94.280705] tegra_watchdog_touch
<4>[ 94.284546] nct1008_get_temp: ret temp=28C
<4>[ 94.289055] Reg Status Reg 0x02 Value 0x80
<4>[ 94.294723] Reg Configuration Reg 0x03 Value 0x04
<4>[ 99.300695] tegra_watchdog_touch
<4>[ 99.304530] nct1008_get_temp: ret temp=28C
<4>[ 99.308965] Reg Status Reg 0x02 Value 0x80
<4>[ 99.314703] Reg Configuration Reg 0x03 Value 0x04
<4>[ 104.320698] tegra_watchdog_touch
<4>[ 104.324600] nct1008_get_temp: ret temp=29C
<4>[ 104.329036] Reg Status Reg 0x02 Value 0x80
<4>[ 104.334707] Reg Configuration Reg 0x03 Value 0x04
<4>[ 109.340700] tegra_watchdog_touch
<4>[ 109.344527] nct1008_get_temp: ret temp=29C
<4>[ 109.349033] Reg Status Reg 0x02 Value 0x80
<4>[ 109.354699] Reg Configuration Reg 0x03 Value 0x04
<4>[ 114.360693] tegra_watchdog_touch
<4>[ 114.364599] nct1008_get_temp: ret temp=29C
<4>[ 114.369034] Reg Status Reg 0x02 Value 0x00
<4>[ 114.374777] Reg Configuration Reg 0x03 Value 0x04
<4>[ 119.380693] tegra_watchdog_touch
<4>[ 119.384509] nct1008_get_temp: ret temp=29C
<4>[ 119.389021] Reg Status Reg 0x02 Value 0x80
<4>[ 119.394693] Reg Configuration Reg 0x03 Value 0x04
<4>[ 124.400916] tegra_watchdog_touch
<4>[ 124.404853] nct1008_get_temp: ret temp=29C
<4>[ 124.409357] Reg Status Reg 0x02 Value 0x80
<4>[ 124.415093] Reg Configuration Reg 0x03 Value 0x04
<4>[ 129.420692] tegra_watchdog_touch
<4>[ 129.424584] nct1008_get_temp: ret temp=29C
<4>[ 129.429032] Reg Status Reg 0x02 Value 0x80
<4>[ 129.434704] Reg Configuration Reg 0x03 Value 0x04
<5>[ 132.330755] asuspec: [asuspec_send_ec_req] send EC_Request
<4>[ 132.336326] battery_status_poll 120 1
<5>[ 132.401897] asuspec: [asuspec_work_function] 0x2 0x81 0x50 0xff
<5>[ 132.407886] asuspec: [asuspec_smi] ASUSPEC_SMI_HANDSHAKING
<4>[ 132.603893] pad_get_psp val->intval=Full ret=e0
<4>[ 132.622667] pad_get_psp voltage_now =8221
<4>[ 132.629409] pad_get_capacity val->intval=100 ret=99
<4>[ 132.637320] pad_get_psp batttery temperature=226
<5>[ 133.636430] asuspec: [asuspec_enter_s3_work_function] EC in S3
<4>[ 134.440693] tegra_watchdog_touch
<4>[ 134.444513] nct1008_get_temp: ret temp=29C
<4>[ 134.448960] Reg Status Reg 0x02 Value 0x80
<4>[ 134.454703] Reg Configuration Reg 0x03 Value 0x04
<4>[ 139.460690] tegra_watchdog_touch
<4>[ 139.464642] nct1008_get_temp: ret temp=29C
<4>[ 139.469104] Reg Status Reg 0x02 Value 0x00
<4>[ 139.474843] Reg Configuration Reg 0x03 Value 0x04
<4>[ 144.480690] tegra_watchdog_touch
<4>[ 144.484514] nct1008_get_temp: ret temp=29C
<4>[ 144.489019] Reg Status Reg 0x02 Value 0x80
<4>[ 144.494693] Reg Configuration Reg 0x03 Value 0x04
<4>[ 149.500692] tegra_watchdog_touch
<4>[ 149.504510] nct1008_get_temp: ret temp=29C
<4>[ 149.508946] Reg Status Reg 0x02 Value 0x80
<4>[ 149.514703] Reg Configuration Reg 0x03 Value 0x04
<4>[ 154.520687] tegra_watchdog_touch
<4>[ 154.524617] nct1008_get_temp: ret temp=29C
<4>[ 154.529051] Reg Status Reg 0x02 Value 0x80
<4>[ 154.534736] Reg Configuration Reg 0x03 Value 0x04
<4>[ 159.540702] tegra_watchdog_touch
<4>[ 159.544536] nct1008_get_temp: ret temp=29C
<4>[ 159.548974] Reg Status Reg 0x02 Value 0x80
<4>[ 159.554740] Reg Configuration Reg 0x03 Value 0x04
<4>[ 164.560693] tegra_watchdog_touch
<4>[ 164.564581] nct1008_get_temp: ret temp=29C
<4>[ 164.569015] Reg Status Reg 0x02 Value 0x00
<4>[ 164.574779] Reg Configuration Reg 0x03 Value 0x04
<4>[ 169.580688] tegra_watchdog_touch
<4>[ 169.584549] nct1008_get_temp: ret temp=29C
<4>[ 169.589057] Reg Status Reg 0x02 Value 0x80
<4>[ 169.594742] Reg Configuration Reg 0x03 Value 0x04
<4>[ 174.600693] tegra_watchdog_touch
<4>[ 174.604512] nct1008_get_temp: ret temp=29C
<4>[ 174.608946] Reg Status Reg 0x02 Value 0x00
<4>[ 174.614712] Reg Configuration Reg 0x03 Value 0x04
<4>[ 179.620693] tegra_watchdog_touch
<4>[ 179.624583] nct1008_get_temp: ret temp=29C
<4>[ 179.629018] Reg Status Reg 0x02 Value 0x80
<4>[ 179.634682] Reg Configuration Reg 0x03 Value 0x04
<4>[ 184.640687] tegra_watchdog_touch
<4>[ 184.644574] nct1008_get_temp: ret temp=29C
<4>[ 184.649017] Reg Status Reg 0x02 Value 0x80
<4>[ 184.654760] Reg Configuration Reg 0x03 Value 0x04
<4>[ 189.660701] tegra_watchdog_touch
<4>[ 189.664592] nct1008_get_temp: ret temp=29C
<4>[ 189.669027] Reg Status Reg 0x02 Value 0x80
<4>[ 189.674773] Reg Configuration Reg 0x03 Value 0x04
<4>[ 194.680693] tegra_watchdog_touch
<4>[ 194.684510] nct1008_get_temp: ret temp=29C
<4>[ 194.689016] Reg Status Reg 0x02 Value 0x80
<4>[ 194.694688] Reg Configuration Reg 0x03 Value 0x04
<4>[ 199.700689] tegra_watchdog_touch
<4>[ 199.704596] nct1008_get_temp: ret temp=29C
<4>[ 199.709039] Reg Status Reg 0x02 Value 0x80
<4>[ 199.714785] Reg Configuration Reg 0x03 Value 0x04
<4>[ 204.720696] tegra_watchdog_touch
<4>[ 204.724594] nct1008_get_temp: ret temp=30C
<4>[ 204.729030] Reg Status Reg 0x02 Value 0x80
<4>[ 204.734696] Reg Configuration Reg 0x03 Value 0x04
<4>[ 209.740695] tegra_watchdog_touch
<4>[ 209.744521] nct1008_get_temp: ret temp=30C
<4>[ 209.748956] Reg Status Reg 0x02 Value 0x80
<4>[ 209.754701] Reg Configuration Reg 0x03 Value 0x04
<4>[ 214.760691] tegra_watchdog_touch
<4>[ 214.764675] nct1008_get_temp: ret temp=30C
<4>[ 214.769116] Reg Status Reg 0x02 Value 0x80
<4>[ 214.774855] Reg Configuration Reg 0x03 Value 0x04
<4>[ 219.780703] tegra_watchdog_touch
<4>[ 219.784523] nct1008_get_temp: ret temp=30C
<4>[ 219.789035] Reg Status Reg 0x02 Value 0x80
<4>[ 219.794703] Reg Configuration Reg 0x03 Value 0x04
<4>[ 224.800693] tegra_watchdog_touch
<4>[ 224.804508] nct1008_get_temp: ret temp=30C
<4>[ 224.808950] Reg Status Reg 0x02 Value 0x80
<4>[ 224.814694] Reg Configuration Reg 0x03 Value 0x04
<4>[ 229.820764] tegra_watchdog_touch
<4>[ 229.824698] nct1008_get_temp: ret temp=30C
<4>[ 229.829153] Reg Status Reg 0x02 Value 0x00
<4>[ 229.834818] Reg Configuration Reg 0x03 Value 0x04
<4>[ 234.840698] tegra_watchdog_touch
<4>[ 234.844517] nct1008_get_temp: ret temp=30C
<4>[ 234.848962] Reg Status Reg 0x02 Value 0x80
<4>[ 234.854635] Reg Configuration Reg 0x03 Value 0x04
<4>[ 239.860691] tegra_watchdog_touch
<4>[ 239.864580] nct1008_get_temp: ret temp=30C
<4>[ 239.869023] Reg Status Reg 0x02 Value 0x00
<4>[ 239.874766] Reg Configuration Reg 0x03 Value 0x04
<3>[ 240.640722] INFO: task kinteractiveup:81 blocked for more than 120 seconds.
<3>[ 240.647828] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
<6>[ 240.655736] kinteractiveup D c0571c3c 0 81 2 0x00000000
<4>[ 240.662465] [<c0571c3c>] (schedule+0x87c/0x958) from [<c00a480c>] (kthread+0x64/0x84)
<4>[ 240.670481] [<c00a480c>] (kthread+0x64/0x84) from [<c00482b8>] (kernel_thread_exit+0x0/0x8)
_that said:
Also try this:
Code:
adb shell hexdump -C -s 0x380000 -n 8 /dev/block/mmcblk0
and tell me if it outputs "ANDROID!" (after some hexadecimal numbers).
Click to expand...
Click to collapse
No, it only outputs:
*
00380000

[Kernel]FlashBeatsReloaded v3.4.34 OC 1,56Ghz AROMA

Deleted
Status:
STABLE
Click to expand...
Click to collapse
And the ROM coming soon
FlashBeats Rom v2.2
Click to expand...
Click to collapse
We continue here :laugh:
And where can I download this?
FlashBeats Rom v2
Click to expand...
Click to collapse
Lol at my dropbox
Gesendet von meinem HTC One SV mit Tapatalk 2
1. For some reason I can not choose another GPU governor. I'm trying to switch to simple. As I understand it, this is what Faux123 wrote on Twitter?
2. I want to ask about the implementation Sweep2Wake in your kernel.
3. According to my observations disabling intelli_plug gives better energy efficiency.
4. There are significant problems with audio playback incoming ringing when overclocking the processor to 1.45 GHz, and the use of profiles to improve the sound quality of the program Volume++.
---------
5. The following information is given to me by the user Russian forum 4pda.ru.
Without this patch ZRAM has errors:
<6>[ 8631.480664] c0 [ACPU] acpuclock_cpu_callback: CPU1 unplug, freq = 1026000
<6>[ 8632.001616] c0 zram: Error allocating memory for compressed page: 11541,size=4116
<1>[ 8632.001616] c0 Write-error on swap-device (253:0:92328)
<6>[ 8632.001830] c0 zram: Error allocating memory for compressed page: 11542,size=4116
<1>[ 8632.001830] c0 Write-error on swap-device (253:0:92336)
<6>[ 8632.002043] c0 zram: Error allocating memory for compressed page: 11543,size=4116
<1>[ 8632.002043] c0 Write-error on swap-device (253:0:92344)
<6>[ 8632.002287] c0 zram: Error allocating memory for compressed page: 11544,size=4116
<1>[ 8632.002287] c0 Write-error on swap-device (253:0:92352)
<6>[ 8632.002471] c0 zram: Error allocating memory for compressed page: 11545,size=4116
<1>[ 8632.002501] c0 Write-error on swap-device (253:0:92360)
<6>[ 8632.002684] c0 zram: Error allocating memory for compressed page: 11546,size=4116
<1>[ 8632.002715] c0 Write-error on swap-device (253:0:92368)
<6>[ 8632.002898] c0 zram: Error allocating memory for compressed page: 11547,size=4116
<1>[ 8632.002898] c0 Write-error on swap-device (253:0:92376)
<6>[ 8632.003111] c0 zram: Error allocating memory for compressed page: 11548,size=4116
<1>[ 8632.003111] c0 Write-error on swap-device (253:0:92384)
<6>[ 8632.052371] c0 zram: Error allocating memory for compressed page: 11549,size=4116
<1>[ 8632.052371] c0 Write-error on swap-device (253:0:92392)
<6>[ 8632.052768] c0 zram: Error allocating memory for compressed page: 11551,size=4116
<1>[ 8632.052768] c0 Write-error on swap-device (253:0:92408)
<6>[ 8632.053012] c0 zram: Error allocating memory for compressed page: 11552,size=4116
<1>[ 8632.053012] c0 Write-error on swap-device (253:0:92416)
<6>[ 8632.053440] c0 zram: Error allocating memory for compressed page: 11553,size=4116
<1>[ 8632.053470] c0 Write-error on swap-device (253:0:92424)
<6>[ 8632.053775] c0 zram: Error allocating memory for compressed page: 11554,size=4116
<1>[ 8632.053806] c0 Write-error on swap-device (253:0:92432)
<6>[ 8632.054508] c0 zram: Error allocating memory for compressed page: 11555,size=4116
<1>[ 8632.054538] c0 Write-error on swap-device (253:0:92440)
<6>[ 8632.054752] c0 zram: Error allocating memory for compressed page: 11556,size=4116
<1>[ 8632.054752] c0 Write-error on swap-device (253:0:92448)
<6>[ 8632.054996] c0 zram: Error allocating memory for compressed page: 11557,size=4116
<1>[ 8632.054996] c0 Write-error on swap-device (253:0:92456)
<6>[ 8632.059422] c0 zram: Error allocating memory for compressed page: 11558,size=4116
<1>[ 8632.059422] c0 Write-error on swap-device (253:0:92464)
<6>[ 8632.087836] c0 [ACPU] acpuclock_cpu_callback: CPU1 hotplug prepare, freq 1026000
<6>[ 8632.089118] c0 [ACPU] acpuclock_cpu_callback: CPU1 hotplug done, freq = 126000
<6>[ 8632.331938] c1 zram: Error allocating memory for compressed page: 12024,size=4107
<1>[ 8632.331968] c1 Write-error on swap-device (253:0:96192)
<6>[ 8632.337676] c1 zram: Error allocating memory for compressed page: 12031,size=4116
<1>[ 8632.337676] c1 Write-error on swap-device (253:0:96248)
<6>[ 8632.337767] c1 zram: Error allocating memory for compressed page: 12032,size=4116
<1>[ 8632.337767] c1 Write-error on swap-device (253:0:96256)
<6>[ 8632.338622] c1 zram: Error allocating memory for compressed page: 12035,size=4116
<1>[ 8632.338622] c1 Write-error on swap-device (253:0:96280)
<6>[ 8632.338683] c1 zram: Error allocating memory for compressed page: 12036,size=4116
<1>[ 8632.338713] c1 Write-error on swap-device (253:0:96288)
<6>[ 8632.338744] c1 zram: Error allocating memory for compressed page: 12037,size=4116
<1>[ 8632.338775] c1 Write-error on swap-device (253:0:96296)
<6>[ 8632.338836] c1 zram: Error allocating memory for compressed page: 12038,size=4116
<1>[ 8632.338836] c1 Write-error on swap-device (253:0:96304)
<6>[ 8632.338897] c1 zram: Error allocating memory for compressed page: 12039,size=4116
<1>[ 8632.338897] c1 Write-error on swap-device (253:0:96312)
<6>[ 8632.341033] c1 zram: Error allocating memory for compressed page: 12045,size=4116
<1>[ 8632.341064] c1 Write-error on swap-device (253:0:96360)
<6>[ 8632.341125] c1 zram: Error allocating memory for compressed page: 12046,size=4116
<1>[ 8632.341125] c1 Write-error on swap-device (253:0:96368)
<6>[ 8632.341186] c1 zram: Error allocating memory for compressed page: 12047,size=4116
<1>[ 8632.341186] c1 Write-error on swap-device (253:0:96376)
<6>[ 8632.346985] c1 zram: Error allocating memory for compressed page: 12058,size=4116
<1>[ 8632.347015] c1 Write-error on swap-device (253:0:96464)
<6>[ 8633.474285] c1 zram: Error allocating memory for compressed page: 12592,size=4116
<1>[ 8633.474285] c1 Write-error on swap-device (253:0:100736)
<6>[ 8633.577963] c1 zram: Error allocating memory for compressed page: 12617,size=4116
<1>[ 8633.577963] c1 Write-error on swap-device (253:0:100936)
<6>[ 8633.717746] c1 zram: Error allocating memory for compressed page: 12684,size=4116
<1>[ 8633.717746] c1 Write-error on swap-device (253:0:101472)
<6>[ 8633.718143] c1 zram: Error allocating memory for compressed page: 12685,size=4116
<1>[ 8633.718173] c1 Write-error on swap-device (253:0:101480)
<6>[ 8633.718570] c1 zram: Error allocating memory for compressed page: 12686,size=4116
<1>[ 8633.718601] c1 Write-error on swap-device (253:0:101488)
<6>[ 8634.159498] c1 zram: Error allocating memory for compressed page: 12769,size=4116
<1>[ 8634.159528] c1 Write-error on swap-device (253:0:102152)
<6>[ 8634.262901] c1 zram: Error allocating memory for compressed page: 12774,size=4110
<1>[ 8634.263023] c1 Write-error on swap-device (253:0:102192)
<6>[ 8634.415106] c1 zram: Error allocating memory for compressed page: 12813,size=4116
<1>[ 8634.415106] c1 Write-error on swap-device (253:0:102504)
<6>[ 8634.419104] c1 zram: Error allocating memory for compressed page: 12829,size=4112
<1>[ 8634.419104] c1 Write-error on swap-device (253:0:102632)
<6>[ 8634.430305] c1 zram: Error allocating memory for compressed page: 12862,size=4116
<1>[ 8634.430305] c1 Write-error on swap-device (253:0:102896)
<6>[ 8634.433418] c1 zram: Error allocating memory for compressed page: 12874,size=4105
<1>[ 8634.433418] c1 Write-error on swap-device (253:0:102992)
<6>[ 8634.443581] c1 zram: Error allocating memory for compressed page: 12907,size=4116
<1>[ 8634.443612] c1 Write-error on swap-device (253:0:103256)
<6>[ 8634.446176] c1 zram: Error allocating memory for compressed page: 12917,size=4102
<1>[ 8634.446176] c1 Write-error on swap-device (253:0:103336)
<6>[ 8634.457957] c0 [DISP] brightness orig=20, transformed=7
<6>[ 8634.475536] c0 [LED]pm8xxx_led_set, id:7, brightness:20
<6>[ 8634.558674] c1 zram: Error allocating memory for compressed page: 12949,size=4116
<1>[ 8634.558704] c1 Write-error on swap-device (253:0:103592)
<6>[ 8634.562672] c1 zram: Error allocating memory for compressed page: 12956,size=4107
<1>[ 8634.562672] c1 Write-error on swap-device (253:0:103648)
<6>[ 8634.581076] c1 zram: Error allocating memory for compressed page: 12979,size=4116
Click to expand...
Click to collapse
The error occurs because of the small size of the paging file by default.
Alternatively, I can advise the Faux123 Kernel Enhancemen, in which you can specify the size of ZRAM
---------
6. After reading this material, I think you need to return intellidemand with minor fixes.
7. I do not understand ... Trickster MOD reports that the simple GPU governor is present, and Faux123 Kernel Enhancement says that it is not.
Which variant is this kernel designed for?
Sent from my HTC One SV using Tapatalk 2
K2 an ul
Gesendet von meinem HTC One SV mit Tapatalk 2
New Release v3.5.29 @ First Post
Thanks for the kernel bro.. been waiting for something like this.. Anyone who doesn't know k2 kernels work for the cricket variant. Flashed the zip it worked like a charm.
Sent from my HTC One SV using Tapatalk 2
Sorry, but nobody else have random reboots??
I have tried 3.5.27 and 3.5.29 and without any changes. I had to pull the battery nearly every hour
This comes from the CPU bining. A cpu With higher voltages ( slow CPU binning) has a other Frequenz list as cpu With fast bining
I work at this
Gesendet von meinem HTC One SV mit Tapatalk 2
Thestealth2 said:
This comes from the CPU bining. A cpu With higher voltages ( slow CPU binning) has a other Frequenz list as cpu With fast bining
I work at this
Gesendet von meinem HTC One SV mit Tapatalk 2
Click to expand...
Click to collapse
Thanks for your reply. I only asked because I wanted to know if there is something wrong with my device - or the person in front of
I'll wait patiently for a solution.
Thestealth2 said:
This comes from the CPU bining. A cpu With higher voltages ( slow CPU binning) has a other Frequenz list as cpu With fast bining
I work at this
Click to expand...
Click to collapse
You want to say that simply by removing them overclocking mode and reboot will disappear?
When removing oc this Kernel is original russian Kernel See my source
Gesendet von meinem HTC One SV mit Tapatalk 2
Everything works fine, OC works, settings via Trickster MOD work. Only lots of soft reboots are kind of annoying.
Sent from my HTC One SV powered by Saturn III.
In next 3 dass i release a new clean Kernel with oc and i work at 2 kernels
Gesendet von meinem HTC One SV mit Tapatalk 2
Thestealth2 said:
In next 3 dass i release a new clean Kernel with oc and i work at 2 kernels
Gesendet von meinem HTC One SV mit Tapatalk 2
Click to expand...
Click to collapse
Does this suggest that for MSM8230 and for MSM8930 appears normal CPU overclocking mode?
Normal cpu overclock mode?
Gesendet von meinem HTC One SV mit Tapatalk 2
Thestealth2 said:
Normal cpu overclock mode?
Gesendet von meinem HTC One SV mit Tapatalk 2
Click to expand...
Click to collapse
No freezes and reboots on MSM8230?
BrateloSlava said:
No freezes and reboots on MSM8230?
Click to expand...
Click to collapse
Test it.
I Release tomorrow a new BugFree Kernel names FlashDream, today i test it.
Stability test
FlashBeats:
View attachment 2178775View attachment 2178782
FlashDream:
View attachment 2178776View attachment 2178781

Building my own CWM recovery...but need help.

Hello.
could you please help me to flash my device ?
it’s a RK30** based device (maybe a RK3066).
I have yet tested a lot of possibility….. but now way to flash a custom recovery ;-(
I would like install TWRP or CWM
I tested :
Arctools.apk (don’t work) / room manager (don’t work) / a batch tool adb installer (don’t work) / fastboot in bootloader mode (don’t work_no device detected) / directly flash some update.zip from the original recovery (don’t work).
My device is rooted buit nothing work for me.
I tried also to flash diferent recovery.img from RKFLASHKIT (ubuntu inside ).
so…. i’m a little bit lost.
For security I dumped these originals partitions :
misc.img
recovery.img
boot.img
kernel.img
I can also provide a complete dmesg in a second post.
So, I hope you will be able to help me to find a good version of recovery and the good way to flash it !
I thank you in advance !
dmseg 1/2
<6>[ 0.000000] Initializing cgroup subsys cpu
<5>[ 0.000000] Linux version 3.0.8+ ([email protected]) (gcc version 4.4.3 (GCC) ) #233 SMP PREEMPT Mon Sep 2 18:37:15 CST 2013
<4>[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d
<4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[ 0.000000] Machine: RK30board
<6>[ 0.000000] memory reserve: Memory(base:0x91800000 size:80M) reserved for <ion>
<6>[ 0.000000] memory reserve: Memory(base:0x90c00000 size:12M) reserved for <fb0 buf>
<6>[ 0.000000] memory reserve: Memory(base:0x90600000 size:6M) reserved for <camera_ipp_mem>
<6>[ 0.000000] memory reserve: Total reserved 98M
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
<6>[ 0.000000] bootconsole [earlycon0] enabled
<4>[ 0.000000] CPU SRAM: copied sram code from c0aa7000 to fef00100 – fef023d0
<4>[ 0.000000] CPU SRAM: copied sram data from c0aa92d0 to fef03000 – fef03920
<6>[ 0.000000] L310 cache controller enabled
<6>[ 0.000000] l2x0: 16 ways, CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001, Cache size: 524288 B
<4>[ 0.000000] DDR DEBUG: version 1.00 20130121
<4>[ 0.000000] DDR DEBUG: DDR3 Device
<4>[ 0.000000] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
<4>[ 0.000000] DDR DEBUG: init success!!! freq=300MHz
<4>[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
<4>[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
<4>[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
<4>[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
<4>[ 0.000000] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
<4>[ 0.000000] DDR DEBUG: DRV Pull-Up=0xb, DRV Pull-Dwn=0xb
<4>[ 0.000000] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
<4>[ 0.000000] rk30_iomux_init
<4>[ 0.000000] Boot mode: 6 flag: 0xc3524200
<7>[ 0.000000] On node 0 totalpages: 237056
<7>[ 0.000000] free_area_init_node: node 0, pgdat c0aa6340, node_mem_map c152d000
<7>[ 0.000000] Normal zone: 1744 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 196400 pages, LIFO batch:31
<7>[ 0.000000] HighMem zone: 304 pages used for memmap
<7>[ 0.000000] HighMem zone: 38608 pages, LIFO batch:7
<6>[ 0.000000] PERCPU: Embedded 7 pages/cpu @c1d35000 s7072 r8192 d13408 u32768
<7>[ 0.000000] pcpu-alloc: s7072 r8192 d13408 u32768 alloc=8*4096
<7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 235008
<5>[ 0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x00180000 mtdparts=rk29xxnand:[email protected](misc),[email protected](kernel),[email protected](boot),[email protected](recovery),[email protected](backup),[email protected](cache),[email protected](userdata),[email protected](kpanic),[email protected](system),[email protected](user) bootver=2013-06-20#1.34 firmware_ver=4.1.1
<6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.000000] Memory: 774MB 152MB = 926MB total
<5>[ 0.000000] Memory: 920020k/920020k available, 128556k reserved, 155648K highmem
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 – 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xfff00000 – 0xfffe0000 ( 896 kB)
<5>[ 0.000000] DMA : 0xffc00000 – 0xffe00000 ( 2 MB)
<5>[ 0.000000] vmalloc : 0xf7000000 – 0xfe800000 ( 120 MB)
<5>[ 0.000000] lowmem : 0xc0000000 – 0xf6800000 ( 872 MB)
<5>[ 0.000000] pkmap : 0xbfe00000 – 0xc0000000 ( 2 MB)
<5>[ 0.000000] modules : 0xbf000000 – 0xbfe00000 ( 14 MB)
<5>[ 0.000000] .init : 0xc0408000 – 0xc048d000 ( 532 kB)
<5>[ 0.000000] .text : 0xc048d000 – 0xc0a411cc (5841 kB)
<5>[ 0.000000] .data : 0xc0a42000 – 0xc0aa6e60 ( 404 kB)
<5>[ 0.000000] .bss : 0xc0aaa024 – 0xc152c388 (10761 kB)
<6>[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
<6>[ 0.000000] Preemptible hierarchical RCU implementation.
<6>[ 0.000000] NR_IRQS:416
<4>[ 0.000000] rk30_gpio_init: 176 gpio irqs in 6 banks
<6>[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
<6>[ 0.000000] Console: colour dummy device 80×30
<6>[ 0.004965] Calibrating delay loop (skipped) preset value.. 1631.46 BogoMIPS (lpj=8157341)
<6>[ 0.013833] pid_max: default: 32768 minimum: 301
<6>[ 0.019037] Mount-cache hash table entries: 512
<6>[ 0.024581] Initializing cgroup subsys debug
<6>[ 0.029240] Initializing cgroup subsys cpuacct
<6>[ 0.034099] Initializing cgroup subsys freezer
<6>[ 0.038983] CPU: Testing write buffer coherency: ok
<4>[ 0.145025] CPU1: Booted secondary processor
<6>[ 0.145071] Brought up 2 CPUs
<6>[ 0.152997] SMP: Total of 2 processors activated (3262.93 BogoMIPS).
<6>[ 0.160214] devtmpfs: initialized
<6>[ 0.171372] NET: Registered protocol family 16
<4>[ 0.176259] last_log: 0xf0100000 0xc0aae210
<4>[ 0.182918] ————[ cut here ]————
<4>[ 0.187958] WARNING: at drivers/gpio/gpiolib.c:101 gpio_ensure_requested+0x48/0x114()
<4>[ 0.196340] autorequest GPIO-183
<4>[ 0.199929] [<c04981c4>] (unwind_backtrace+0x0/0xf0) from [<c04c0ae0>] (warn_slowpath_common+0x4c/0x64)
<4>[ 0.210067] [<c04c0ae0>] (warn_slowpath_common+0x4c/0x64) from [<c04c0b78>] (warn_slowpath_fmt+0x2c/0x3c)
<4>[ 0.220438] [<c04c0b78>] (warn_slowpath_fmt+0x2c/0x3c) from [<c061a4f0>] (gpio_ensure_requested+0x48/0x114)
<4>[ 0.230984] [<c061a4f0>] (gpio_ensure_requested+0x48/0x114) from [<c061aba0>] (gpio_direction_output+0x7c/0xfc)
<4>[ 0.241938] [<c061aba0>] (gpio_direction_output+0x7c/0xfc) from [<c040e444>] (machine_rk30_board_init+0x34/0x288)
<4>[ 0.252985] [<c040e444>] (machine_rk30_board_init+0x34/0x288) from [<c040a4d8>] (customize_machine+0x1c/0x28)
<4>[ 0.263713] [<c040a4d8>] (customize_machine+0x1c/0x28) from [<c048d5d8>] (do_one_initcall+0x94/0x164)
<4>[ 0.273604] [<c048d5d8>] (do_one_initcall+0x94/0x164) from [<c0408350>] (kernel_init+0x88/0x130)
<4>[ 0.283027] [<c0408350>] (kernel_init+0x88/0x130) from [<c0493678>] (kernel_thread_exit+0x0/0x8)
<4>[ 0.292464] —[ end trace 1b75b31a2719ed1c ]—
<6>[ 0.398156] rk29sdk_wifi_bt_gpio_control_init: init finished
<6>[ 0.408723] console [ttyFIQ0] enabled, bootconsole disabled
<6>[ 0.414889] Registered FIQ tty driver f008fc00
<6>[ 0.426987] bio: create slab <bio-0> at 0
<4>[ 0.431222] wm831x_dcdc_init
<4>[ 0.431404] wm831x_ldo_init
<5>[ 0.431758] SCSI subsystem initialized
<6>[ 0.431971] usbcore: registered new interface driver usbfs
<6>[ 0.432043] usbcore: registered new interface driver hub
<6>[ 0.434252] usbcore: registered new device driver usb
<6>[ 0.434711] rk30_i2c rk30_i2c.0: i2c-0: RK30 I2C adapter
<6>[ 0.434938] rk30_i2c rk30_i2c.1: i2c-1: RK30 I2C adapter
<6>[ 0.435151] rk30_i2c rk30_i2c.2: i2c-2: RK30 I2C adapter
<6>[ 0.435260] rk30_i2c rk30_i2c.3: i2c-3: RK30 I2C adapter
<6>[ 0.435379] rk30_i2c rk30_i2c.4: i2c-4: RK30 I2C adapter
<6>[ 0.483138] rk30-adc rk30-adc: rk30 adc: driver initialized
<4>[ 0.483433] timed_gpio_probe
<6>[ 0.483524] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[ 0.483920] Bluetooth: Core ver 2.16
<6>[ 0.483970] NET: Registered protocol family 31
<6>[ 0.483982] Bluetooth: HCI device and connection manager initialized
<6>[ 0.483999] Bluetooth: HCI socket layer initialized
<6>[ 0.484011] Bluetooth: L2CAP socket layer initialized
<6>[ 0.484036] Bluetooth: SCO socket layer initialized
<4>[ 0.485072] rk fb probe ok!
<4>[ 0.485164] wm831x_i2c_init
<6>[ 0.532516] cfg80211: Calling CRDA to update world regulatory domain
<3>[ 0.884439] rk30_i2c rk30_i2c.1: Addr[0x34] wait event timeout, state: 0, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x0
<4>[ 0.904437] rk30_i2c rk30_i2c.1: I2C_CON: start bit is set
<3>[ 0.924437] wm831x 1-0034: Failed to read parent ID: -110
<4>[ 0.924461] wm831x: probe of 1-0034 failed with error -110
<3>[ 1.324439] rk30_i2c rk30_i2c.1: Addr[0x2d] wait event timeout, state: 0, is_busy: 1, error: 0, complete_what: 0x2, ipd: 0x20
<3>[ 1.364436] tps65910 1-002d: tps65910_set_bits:read from reg 3f failed
<3>[ 1.764438] rk30_i2c rk30_i2c.1: Addr[0x2d] wait event timeout, state: 0, is_busy: 1, error: 0, complete_what: 0x2, ipd: 0x20
<3>[ 1.804436] tps65910 1-002d: read from reg 46 failed
<3>[ 1.804451] tps65910 1-002d: Error in configuring external control EN1
<4>[ 1.804465] tps65910 1-002d: Failed to initialise ext control config
<3>[ 2.204439] rk30_i2c rk30_i2c.1: Addr[0x2d] wait event timeout, state: 0, is_busy: 1, error: 0, complete_what: 0x2, ipd: 0x20
<3>[ 2.244436] tps65910 1-002d: tps65910_set_bits:read from reg 20 failed
<3>[ 2.244453] set_machine_constraints: VIO: failed to enable
<3>[ 2.244515] tps65910 1-002d: failed to register tps65910-pmic regulator
<4>[ 2.244536] tps65910-pmic: probe of tps65910-pmic failed with error -110
<4>[ 2.244680] tps65910_pre_init,line=38
<3>[ 2.644440] rk30_i2c rk30_i2c.1: Addr[0x2d] wait event timeout, state: 0, is_busy: 1, error: 0, complete_what: 0x2, ipd: 0x20
<3>[ 2.684437] tps65910 1-002d: Read from reg 0x40 failed
<3>[ 2.684451] Unable to read TPS65910_DEVCTRL2 reg
<3>[ 2.684463] tps65910 1-002d: pre_init() failed: -110
<4>[ 2.684601] tps65910: probe of 1-002d failed with error -110
<6>[ 2.684808] Switching to clocksource timer1
<4>[ 2.685016] lcdc0:reg_phy_base = 0x1010c000,reg_vir_base:0xf701c000
<4>[ 2.685049] fb0:win1
<4>[ 2.685052] fb1:win0
<4>[ 2.685056] fb2:win2
<6>[ 2.685065] Switched to NOHz mode on CPU #1
<4>[ 2.685153] lcdc0: dclk:33000000>>fps:59 rk30_load_screen for lcdc0 ok!
<6>[ 2.694437] Switched to NOHz mode on CPU #0
<4>[ 2.713630] fb0hy:90c00000>>vir:f8000000>>len:0xc00000
<4>[ 2.713896] rk_fb_register>>>>>fb0
<4>[ 2.714053] rk_fb_register>>>>>fb1
<4>[ 2.714227] rk_fb_register>>>>>fb2
<4>[ 2.714240] lcdc0 wakeup from stanby
<6>[ 2.714250] lcdc0 win1 open
<4>[ 2.731799] rk30 lcdc0 probe ok!
<4>[ 2.731858] lcdc1:reg_phy_base = 0x1010e000,reg_vir_base:0xf7028000
<4>[ 2.731891] fb0:win1
<4>[ 2.731895] fb1:win0
<4>[ 2.731898] fb2:win2
<4>[ 2.731952] lcdc1: dclk:74250000>>fps:60 rk30_load_screen for lcdc1 ok!
<4>[ 2.731974] fb3hy:90c00000>>vir:f8000000>>len:0xc00000
<4>[ 2.732253] rk_fb_register>>>>>fb3
<4>[ 2.732420] rk_fb_register>>>>>fb4
<4>[ 2.732568] rk_fb_register>>>>>fb5
<4>[ 2.732579] rk30 lcdc1 probe ok!
<4>[ 2.732637] ————————————————-boot with some other pmu,this is important notify————————————————-pwm_regulator_probe:n_voltages=17
<4>[ 2.732844] pwm_regulator.0: driver initialized
<4>[ 2.732856] rk30 pwm regulator is ok with pmu tps65910
<4>[ 2.742902] pwm_regulator_probe set vdd_core=1100000mV end
<4>[ 2.870731] regbase f7080000 0x0, otg_phy_confed08184, 0x550
<6>[ 2.920980] rk30_adc_battery: driver initialized
<6>[ 2.921245] NET: Registered protocol family 2
<6>[ 2.921372] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 2.921722] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>[ 2.923559] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
<6>[ 2.924621] TCP: Hash tables configured (established 131072 bind 65536)
<6>[ 2.924635] TCP reno registered
<6>[ 2.924648] UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 2.924687] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 2.925056] NET: Registered protocol family 1
<4>[ 2.925231] RK29 Backlight Driver Initialized.
<6>[ 2.925425] Unpacking initramfs…
<6>[ 3.000775] Freeing initrd memory: 1536K
<6>[ 3.000973] rk30-tsadc rk30-tsadc: initialized
<6>[ 3.001830] Loaded driver for PL330 DMAC-1 rk29-pl330
<6>[ 3.001847] DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
<6>[ 3.002002] Loaded driver for PL330 DMAC-2 rk29-pl330
<6>[ 3.002017] DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14
<4>[ 3.009188] highmem bounce pool size: 64 pages
<6>[ 3.009376] ashmem: initialized
<6>[ 3.014384] fuse init (API version 7.16)
<6>[ 3.015969] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>[ 3.015988] io scheduler noop registered
<6>[ 3.015998] io scheduler deadline registered
<6>[ 3.016056] io scheduler cfq registered (default)
<6>[ 3.022108] rga: Driver loaded succesfully
<4>[ 3.022746] rk_serial.c v1.3 2012-12-14
<6>[ 3.022838] rk_serial.0: ttyS0 at MMIO 0x10124000 (irq = 66) is a rk29_serial.0
<6>[ 3.044916] rk_serial rk_serial.0: membase 0xf704c000
<6>[ 3.044980] rk_serial.3: ttyS3 at MMIO 0x20068000 (irq = 69) is a rk29_serial.3
<6>[ 3.084869] rk_serial rk_serial.3: membase 0xf7050000
<6>[ 3.085144] Rockchip ion module(version: 1.0) is successfully loaded
<6>[ 3.087680] loop: module loaded
<6>[ 3.087788] Android kernel panic handler initialized (bind=kpanic)
<6>[ 3.088503] PPP generic driver version 2.4.2
<6>[ 3.088688] PPP Deflate Compression module registered
<6>[ 3.088701] PPP BSD Compression module registered
<6>[ 3.089295] PPP MPPE Compression module registered
<6>[ 3.089311] NET: Registered protocol family 24
<6>[ 3.089390] usbcore: registered new interface driver asix
<6>[ 3.089440] usbcore: registered new interface driver cdc_ether
<6>[ 3.089486] usbcore: registered new interface driver dm9620
<6>[ 3.089532] usbcore: registered new interface driver SR9700_android
<6>[ 3.089577] usbcore: registered new interface driver net1080
<6>[ 3.089621] usbcore: registered new interface driver cdc_subset
<6>[ 3.089674] usbcore: registered new interface driver zaurus
<6>[ 3.089697] cdc_ncm: 04-Aug-2011
<6>[ 3.089741] usbcore: registered new interface driver cdc_ncm
<4>[ 3.089753] Rockchip WiFi SYS interface (V1.00) …
<6>[ 3.089797] Initializing USB Mass Storage driver…
<6>[ 3.089858] usbcore: registered new interface driver usb-storage
<6>[ 3.089870] USB Mass Storage support registered.
<6>[ 3.089988] usbcore: registered new interface driver usbserial
<6>[ 3.090033] USB Serial support registered for generic
<6>[ 3.090086] usbcore: registered new interface driver usbserial_generic
<6>[ 3.090099] usbserial: USB Serial Driver core
<6>[ 3.090139] USB Serial support registered for GSM modem (1-port)
<6>[ 3.090193] usbcore: registered new interface driver option
<6>[ 3.090205] option: v0.7.2:USB Driver for GSM modems
<6>[ 3.300992] DWC_OTG: ^^^^^^^^^^^^^^^^^Device Mode
<6>[ 3.301017] usb20_otg usb20_otg: DWC OTG Controller
<6>[ 3.301042] usb20_otg usb20_otg: new USB bus registered, assigned bus number 1
<6>[ 3.301072] usb20_otg usb20_otg: irq 48, io mem 0x00000000
<6>[ 3.301081] DWC_OTG: dwc_otg_hcd_start controller in device mode,everest
<6>[ 3.301128] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 3.301141] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 3.301151] usb usb1: Product: DWC OTG Controller
<6>[ 3.301159] usb usb1: Manufacturer: Linux 3.0.8+ dwc_otg_hcd
<6>[ 3.301167] usb usb1: SerialNumber: usb20_otg
<6>[ 3.301501] hub 1-0:1.0: USB hub found
<6>[ 3.301516] hub 1-0:1.0: 1 port detected
<6>[ 3.302100] DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:0xf7180000
<6>[ 3.512773] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
<6>[ 3.512796] usb20_host usb20_host: DWC OTG Controller
<6>[ 3.512818] usb20_host usb20_host: new USB bus registered, assigned bus number 2
<6>[ 3.512845] usb20_host usb20_host: irq 49, io mem 0x00000000
<6>[ 3.512887] DWC_OTG: Init: Port Power? op_state=1
<6>[ 3.512895] DWC_OTG: Init: Power Port (0)
<6>[ 3.512933] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 3.512945] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 3.512955] usb usb2: Product: DWC OTG Controller
<6>[ 3.512963] usb usb2: Manufacturer: Linux 3.0.8+ host20_hcd
<6>[ 3.512971] usb usb2: SerialNumber: usb20_host
<6>[ 3.513248] hub 2-0:1.0: USB hub found
<6>[ 3.513263] hub 2-0:1.0: 1 port detected
<6>[ 3.514441] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[ 3.514453] android_usb gadget: Number of LUNs=2
<6>[ 3.514462] lun0: LUN: removable file: (no medium)
<6>[ 3.514471] lun1: LUN: removable file: (no medium)
<6>[ 3.514625] android_usb gadget: android_usb ready
<6>[ 3.514812] input: rk29-keypad as /devices/platform/rk29-keypad/input/input0
<4>[ 3.515006] ==gsl_ts_init==
<4>[ 3.515038] GSLX680 Enter gsl_ts_probe
<4>[ 3.515045] ==kzalloc success=
<4>[ 3.515051] [GSLX680] Enter gslX680_ts_init
<6>[ 3.515241] input: gslX680 as /devices/platform/rk30_i2c.2/i2c-2/2-0040/input/input1
<4>[ 3.605422] I read reg 0xf0 is 0
<4>[ 3.625190] I write reg 0xf0 0x12
<4>[ 3.645345] I read reg 0xf0 is 0x12
<3>[ 3.645687] i2c i2c-2: No ack, Maybe slave(addr: 0x40) not exist or abnormal power-on, retry 2…
<3>[ 3.646027] i2c i2c-2: No ack, Maybe slave(addr: 0x40) not exist or abnormal power-on, retry 1…
<3>[ 3.646366] i2c i2c-2: No ack, Maybe slave(addr: 0x40) not exist or abnormal power-on, retry 0…
<3>[ 3.745366] i2c i2c-2: No ack, Maybe slave(addr: 0x40) not exist or abnormal power-on, retry 2…
<3>[ 3.745875] i2c i2c-2: No ack, Maybe slave(addr: 0x40) not exist or abnormal power-on, retry 1…
<3>[ 3.746372] i2c i2c-2: No ack, Maybe slave(addr: 0x40) not exist or abnormal power-on, retry 0…
dmesg 2/2
<4>[ 3.814895] =============gsl_load_fw start==============
<6>[ 3.894947] usb 2-1: new high speed USB device number 2 using usb20_host
<6>[ 4.105961] usb 2-1: New USB device found, idVendor=0bda, idProduct=0179
<6>[ 4.106033] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[ 4.106081] usb 2-1: Product: 802.11n NIC
<6>[ 4.106116] usb 2-1: Manufacturer: Realtek
<6>[ 4.106150] usb 2-1: SerialNumber: 00AE0E0372CD
<4>[ 4.489292] =============gsl_load_fw end==============
<3>[ 4.535378] i2c i2c-2: No ack, Maybe slave(addr: 0x40) not exist or abnormal power-on, retry 2…
<3>[ 4.535938] i2c i2c-2: No ack, Maybe slave(addr: 0x40) not exist or abnormal power-on, retry 1…
<3>[ 4.536452] i2c i2c-2: No ack, Maybe slave(addr: 0x40) not exist or abnormal power-on, retry 0…
<4>[ 4.695988] [GSLX680] End gsl_ts_probe
<4>[ 4.696156] ret=0
<4>[ 4.696796] sensor_register_slave:mxc6225,id=16
<4>[ 4.696838] sensor_register_slave:akm8975,id=18
<4>[ 4.697136] sensor_register_slave:l3g4200d,id=31
<4>[ 4.697175] sensor_register_slave:cm3217,id=34
<4>[ 4.697205] light_cm3217_init
<6>[ 4.698522] lirc_dev: IR Remote Control driver registered, major 250
<6>[ 4.698568] IR NEC protocol handler initialized
<6>[ 4.698600] IR RC5(x) protocol handler initialized
<6>[ 4.698632] IR RC6 protocol handler initialized
<6>[ 4.698662] IR JVC protocol handler initialized
<6>[ 4.698693] IR Sony protocol handler initialized
<6>[ 4.698724] IR RC5 (streamzap) protocol handler initialized
<6>[ 4.698758] IR LIRC bridge handler initialized
<6>[ 4.698787] Linux video capture interface: v2.00
<4>[ 4.699398] start_charge_logo_display
<6>[ 4.700715] device-mapper: uevent: version 1.0.3
<6>[ 4.701579] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
<6>[ 4.702357] Bluetooth: HCI UART driver ver 2.2
<6>[ 4.702401] Bluetooth: HCI H4 protocol initialized
<6>[ 4.702436] Bluetooth: HCILL protocol initialized
<6>[ 4.702976] cpuidle: using governor ladder
<6>[ 4.703016] cpuidle: using governor menu
<6>[ 4.709081]
<6>[ 4.709092] drivers/mmc/core/core.c…1827.. ===== mmc_rescan Begin….[mmc0]
<6>[ 4.714321] rk29_sdmmc_change_clk_div..1928.. newDiv=83, newCLK=298Khz [sd_mmc]
<6>[ 4.714545] .Line3891..The End of SDMMC-probe Ver.5.00 The last modify date is 2012-11-05. [sd_mmc]
<6>[ 4.715141] .Line3891..The End of SDMMC-probe Ver.5.00 The last modify date is 2012-11-05. [sdio]
<7>[ 4.715296] Registered led device: button-backlight
<6>[ 4.717070] usbcore: registered new interface driver usbhid
<6>[ 4.717084] usbhid: USB HID core driver
<6>[ 4.717456] logger: created 256K log ‘log_main’
<6>[ 4.717551] logger: created 256K log ‘log_events’
<6>[ 4.717660] logger: created 256K log ‘log_radio’
<6>[ 4.717755] logger: created 256K log ‘log_system’
<4>[ 4.718339] i2c-core: driver [ES8323] using legacy suspend method
<4>[ 4.718354] i2c-core: driver [ES8323] using legacy resume method
<6>[ 4.718541] ES8323 audio_card_init
<6>[ 4.718553] XXXXEnter::audio_card_init—-201
<4>[ 4.718789] es8323_probe
<6>[ 4.751094]
<6>[ 4.751098] mmc_attach_sd..1218.. ===== Begin to identify card as SD-card. [mmc0]
<3>[ 4.757661] ES8323 0-0010: Failed to add route Left DAC->Left Mixer
<3>[ 4.757708] ES8323 0-0010: ES8323.0-0010: Failed to add 3D Mode: -16
<3>[ 4.757805] ES8323 0-0010: Failed to add route Left DAC->Left Mixer
<6>[ 4.757821] Enter::rk29_es8323_init—-138
<6>[ 4.757833] Enter::es8323_set_dai_sysclk—-668
<3>[ 4.767002] ES8323 0-0010: asoc: failed to add kcontrol Left Line Mux
<3>[ 4.767030] ES8323 0-0010: asoc: failed to add kcontrol Right PGA Mux
<3>[ 4.767056] ES8323 0-0010: asoc: failed to add kcontrol Left PGA Mux
<3>[ 4.767079] ES8323 0-0010: asoc: failed to add kcontrol Right ADC Mux
<3>[ 4.767102] ES8323 0-0010: asoc: failed to add kcontrol Left ADC Mux
<3>[ 4.767126] ES8323 0-0010: asoc: failed to add kcontrol Differential Mux
<4>[ 4.767178] ES8323 0-0010: ASoC: Failed to create POST debugfs file
<4>[ 4.767197] ES8323 0-0010: ASoC: Failed to create PRE debugfs file
<4>[ 4.767214] ES8323 0-0010: ASoC: Failed to create RINPUT2 debugfs file
<4>[ 4.767229] ES8323 0-0010: ASoC: Failed to create RINPUT1 debugfs file
<4>[ 4.767245] ES8323 0-0010: ASoC: Failed to create LINPUT2 debugfs file
<4>[ 4.767261] ES8323 0-0010: ASoC: Failed to create LINPUT1 debugfs file
<4>[ 4.767276] ES8323 0-0010: ASoC: Failed to create VREF debugfs file
<4>[ 4.767292] ES8323 0-0010: ASoC: Failed to create ROUT2 debugfs file
<4>[ 4.767307] ES8323 0-0010: ASoC: Failed to create LOUT2 debugfs file
<4>[ 4.767323] ES8323 0-0010: ASoC: Failed to create ROUT1 debugfs file
<4>[ 4.767338] ES8323 0-0010: ASoC: Failed to create LOUT1 debugfs file
<4>[ 4.767354] ES8323 0-0010: ASoC: Failed to create Left Out 1 debugfs file
<4>[ 4.767370] ES8323 0-0010: ASoC: Failed to create Right Out 1 debugfs file
<4>[ 4.767387] ES8323 0-0010: ASoC: Failed to create Left Out 2 debugfs file
<4>[ 4.767403] ES8323 0-0010: ASoC: Failed to create Right Out 2 debugfs file
<4>[ 4.767420] ES8323 0-0010: ASoC: Failed to create Right Mixer debugfs file
<4>[ 4.767437] ES8323 0-0010: ASoC: Failed to create Left Mixer debugfs file
<4>[ 4.767453] ES8323 0-0010: ASoC: Failed to create Left ADC debugfs file
<4>[ 4.767469] ES8323 0-0010: ASoC: Failed to create Right ADC debugfs file
<4>[ 4.767487] ES8323 0-0010: ASoC: Failed to create Right Line Mux debugfs file
<3>[ 4.767507] ES8323 0-0010: asoc: failed to add kcontrol Left Line Mux
<4>[ 4.767524] ES8323 0-0010: ASoC: Failed to create Left Line Mux debugfs file
<3>[ 4.767543] ES8323 0-0010: asoc: failed to add kcontrol Right PGA Mux
<4>[ 4.767560] ES8323 0-0010: ASoC: Failed to create Right PGA Mux debugfs file
<3>[ 4.767578] ES8323 0-0010: asoc: failed to add kcontrol Left PGA Mux
<4>[ 4.767595] ES8323 0-0010: ASoC: Failed to create Left PGA Mux debugfs file
<3>[ 4.767613] ES8323 0-0010: asoc: failed to add kcontrol Right ADC Mux
<4>[ 4.767629] ES8323 0-0010: ASoC: Failed to create Right ADC Mux debugfs file
<3>[ 4.767648] ES8323 0-0010: asoc: failed to add kcontrol Left ADC Mux
<4>[ 4.767664] ES8323 0-0010: ASoC: Failed to create Left ADC Mux debugfs file
<3>[ 4.767683] ES8323 0-0010: asoc: failed to add kcontrol Differential Mux
<4>[ 4.767700] ES8323 0-0010: ASoC: Failed to create Differential Mux debugfs file
<4>[ 4.767717] ES8323 0-0010: ASoC: Failed to create Mic Bias debugfs file
<6>[ 4.767829] Enter::es8323_set_bias_level—-929 level =1
<6>[ 4.769588] Enter::es8323_set_bias_level—-929 level =2
<6>[ 4.772469] Enter::es8323_set_bias_level—-929 level =3
<6>[ 4.772557] asoc: ES8323 HiFi <-> rk29_i2s.0 mapping ok
<6>[ 4.773027] ALSA device list:
<6>[ 4.773039] #0: RK29_ES8323
<6>[ 4.773144] GACT probability NOT on
<6>[ 4.773159] Mirror/redirect action on
<6>[ 4.773170] u32 classifier
<6>[ 4.773177] Actions configured
<6>[ 4.773188] Netfilter messages via NETLINK v0.30.
<6>[ 4.773244] nf_conntrack version 0.5.0 (14399 buckets, 57596 max)
<6>[ 4.773738] ctnetlink v0.93: registering with nfnetlink.
<6>[ 4.773784] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[ 4.773798] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 4.774051] xt_time: kernel timezone is -0000
<6>[ 4.774217] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 4.774402] arp_tables: (C) 2002 David S. Miller
<6>[ 4.774583] TCP cubic registered
<6>[ 4.775165] NET: Registered protocol family 10
<6>[ 4.775970] Mobile IPv6
<6>[ 4.776012] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 4.776160] IPv6 over IPv4 tunneling driver
<6>[ 4.777191] NET: Registered protocol family 17
<6>[ 4.777233] NET: Registered protocol family 15
<5>[ 4.777362] Bridge firewalling registered
<6>[ 4.779331] rk29_sdmmc_change_clk_div..1928.. newDiv=0, newCLK=49500Khz [sd_mmc]
<6>[ 4.779449] mmc0: new high speed SDHC card at address b368
<6>[ 4.779773] Bluetooth: RFCOMM TTY layer initialized
<6>[ 4.779795] Bluetooth: RFCOMM socket layer initialized
<6>[ 4.779807] Bluetooth: RFCOMM ver 1.11
<6>[ 4.779819] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 4.779831] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 4.779981] NET: Registered protocol family 35
<6>[ 4.780261] [BT_RFKILL]: Enter rfkill_rk_init
<6>[ 4.780369] [BT_RFKILL]: Request irq for bt wakeup host
<6>[ 4.780396] [BT_RFKILL]: ** disable irq
<6>[ 4.780591] mmcblk0: mmc0:b368 NCard 7.40 GiB
<6>[ 4.781886]
<6>[ 4.781890] msdos_partition..461… ==== Begin to parse sdcard-partition. [mmc0]
<6>[ 4.781908] msdos_partition..530… ==== The sdcard has MBR. [mmc0]
<6>[ 4.781923] msdos_partition..543… ==== partition-1, size=7760896KB [mmc0]
<6>[ 4.781938] msdos_partition..571… ==== main partition-1….[mmc0]
<6>[ 4.781951] mmcblk0: p1
<6>[ 4.782370] mmc_rescan_try_freq..1721.. ===== Initialize SD-card successfully. [mmc0]
<6>[ 4.782396]
<6>[ 4.782399] drivers/mmc/core/core.c…1827.. ===== mmc_rescan Begin….[mmc1]
<6>[ 4.806820] [BT_RFKILL]: bt shut off power
<6>[ 4.836600] [BT_RFKILL]: bt_default device registered.
<6>[ 4.836844] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
<6>[ 4.837495] i2c i2c-0: sensor_probe: ak8975,0xf00a7a00
<4>[ 4.837649] rk30-camera version: v0.2.28 Zoom by ipp
<3>[ 4.837799] i2c i2c-0: No ack, Maybe slave(addr: 0xd) not exist or abnormal power-on, retry 2…
<3>[ 4.838078] i2c i2c-0: No ack, Maybe slave(addr: 0xd) not exist or abnormal power-on, retry 1…
<3>[ 4.838349] i2c i2c-0: No ack, Maybe slave(addr: 0xd) not exist or abnormal power-on, retry 0…
<3>[ 4.838625] i2c i2c-0: No ack, Maybe slave(addr: 0xd) not exist or abnormal power-on, retry 2…
<3>[ 4.838897] i2c i2c-0: No ack, Maybe slave(addr: 0xd) not exist or abnormal power-on, retry 1…
<3>[ 4.839169] i2c i2c-0: No ack, Maybe slave(addr: 0xd) not exist or abnormal power-on, retry 0…
<3>[ 4.839441] i2c i2c-0: No ack, Maybe slave(addr: 0xd) not exist or abnormal power-on, retry 2…
<3>[ 4.839720] i2c i2c-0: No ack, Maybe slave(addr: 0xd) not exist or abnormal power-on, retry 1…
<4>[ 4.839907] get cif ldo failed!
<3>[ 4.840023] i2c i2c-0: No ack, Maybe slave(addr: 0xd) not exist or abnormal power-on, retry 0…
<4>[ 4.840042] sensor_chip_init:fail to read ak8975 devid:0xff
<3>[ 4.840057] i2c i2c-0: sensor_probe failed -11
<4>[ 4.840076] sensors: probe of 0-000d failed with error -11
<6>[ 4.840107] i2c i2c-0: sensor_probe: l3g4200d_gryo,0xf00a7c00
<3>[ 4.842697] i2c i2c-0: No ack, Maybe slave(addr: 0x69) not exist or abnormal power-on, retry 2…
<3>[ 4.842985] i2c i2c-0: No ack, Maybe slave(addr: 0x69) not exist or abnormal power-on, retry 1…
<3>[ 4.843264] i2c i2c-0: No ack, Maybe slave(addr: 0x69) not exist or abnormal power-on, retry 0…
<3>[ 4.843543] i2c i2c-0: No ack, Maybe slave(addr: 0x69) not exist or abnormal power-on, retry 2…
<3>[ 4.843818] i2c i2c-0: No ack, Maybe slave(addr: 0x69) not exist or abnormal power-on, retry 1…
<3>[ 4.844093] i2c i2c-0: No ack, Maybe slave(addr: 0x69) not exist or abnormal power-on, retry 0…
<3>[ 4.844369] i2c i2c-0: No ack, Maybe slave(addr: 0x69) not exist or abnormal power-on, retry 2…
<3>[ 4.844644] i2c i2c-0: No ack, Maybe slave(addr: 0x69) not exist or abnormal power-on, retry 1…
<3>[ 4.844916] i2c i2c-0: No ack, Maybe slave(addr: 0x69) not exist or abnormal power-on, retry 0…
<4>[ 4.844934] sensor_chip_init:fail to read l3g4200d_gryo devid:0xff
<3>[ 4.844949] i2c i2c-0: sensor_probe failed -11
<4>[ 4.844968] sensors: probe of 0-0069 failed with error -11
<6>[ 4.844997] i2c i2c-0: sensor_probe: gs_mxc6225,0xf00a7e00
<4>[ 4.845025] sensor_chip_init:gs_mxc6225:devid=0x0,ops=0xc0a8e1f0
<6>[ 4.846097] input: gsensor as /devices/platform/rk30_i2c.0/i2c-0/0-0015/input/input2
<4>[ 4.846242] sensor_irq_init:use polling,delay=30 ms
<4>[ 4.846386] sensor_misc_device_register:miscdevice: mma8452_daemon
<4>[ 4.846402] sensor_probe:initialized ok,sensor name:mxc6225,type:1,id=16
<4>[ 4.846408]
<6>[ 4.846444] i2c i2c-2: sensor_probe: light_cm3217,0xf01be600
<4>[ 4.846460] sensor_chip_init:light_cm3217:devid=0x0,ops=0xc0a8e430
<3>[ 4.846642] i2c i2c-2: No ack, Maybe slave(addr: 0x10) not exist or abnormal power-on, retry 2…
<3>[ 4.846816] i2c i2c-2: No ack, Maybe slave(addr: 0x10) not exist or abnormal power-on, retry 1…
<3>[ 4.846984] i2c i2c-2: No ack, Maybe slave(addr: 0x10) not exist or abnormal power-on, retry 0…
<3>[ 4.847152] i2c i2c-2: No ack, Maybe slave(addr: 0x10) not exist or abnormal power-on, retry 2…
<3>[ 4.847318] i2c i2c-2: No ack, Maybe slave(addr: 0x10) not exist or abnormal power-on, retry 1…
<3>[ 4.847483] i2c i2c-2: No ack, Maybe slave(addr: 0x10) not exist or abnormal power-on, retry 0…
<4>[ 4.847499] sensor_active:fail to active sensor
<4>[ 4.847510] sensor_init:line=97,error
<4>[ 4.847519] sensor_initial:fail to init sensor
<4>[ 4.847529] sensor_chip_init:fail to init sensor
<3>[ 4.847541] i2c i2c-2: sensor_probe failed -11
<4>[ 4.847558] sensors: probe of 2-0010 failed with error -11
<6>[ 4.847610] sensor_init: Probe name sensors
<3>[ 4.847624] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<6>[ 4.847897] Freeing init memory: 532K
<3>[ 4.862918] init: /init.rk30board.rc: 91: invalid command ‘mknod’
<3>[ 4.863016] init: /init.rk30board.rc: 126: invalid service name ‘mt6620_supplicant’
<4>[ 4.863861] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<6>[ 4.928007] keychord: using input dev rk29-keypad for fevent
<3>[ 4.928234] init: cannot open ‘/initlogo.rle’
<4>[ 4.947233] get cif ldo failed!
<4>[ 4.947248] Probe gc2035_back success
<4>[ 4.947375] get cif ldo failed!
<4>[ 5.020185] gp_rknand_info = : 0xf02b1000
<4>[ 5.020277] rk30_chip_set:0
<4>[ 5.020359] request IRQ_NANDC irq , ret=0………
<4>[ 5.020387] FTL INFO:Version = 438,Date = 20130620
<4>[ 5.020459] FlashCopyProgBuf1=0xc13d0000
<4>[ 5.020489] ATime: 40 ns AHB: 148 timming: 1081
<4>[ 5.020507] No.1 FLASH INFO:2c 44 44 4b a9
<4>[ 5.020872] ATime: 32 ns AHB: 148 timming: 1061
<4>[ 5.021053] ATime: 32 ns AHB: 148 timming: 1061
<4>[ 5.021066] randomizer = 2 , EccBits = 28 pSpec->pReadRetrial = bf009708
<4>[ 5.054950] get cif ldo failed!
<4>[ 5.054963] Probe gc0308_front success
<4>[ 5.082747] totalLogicBlkRaw = 1897
<4>[ 5.082770] gBootMedia = 1 gSdmmcFwPartOffset =0!
<4>[ 5.082782] rknand_buffer.c version: 4.38 20121130!
<5>[ 5.087176] 10 cmdlinepart partitions found on MTD device rk29xxnand
<5>[ 5.087193] Creating 10 MTD partitions on “rk29xxnand”:
<5>[ 5.087210] 0x000000400000-0x000000800000 : “misc”
<5>[ 5.088284] 0x000000800000-0x000001000000 : “kernel”
<5>[ 5.089072] 0x000001000000-0x000002000000 : “boot”
<5>[ 5.089752] 0x000002000000-0x000004000000 : “recovery”
<5>[ 5.090466] 0x000004000000-0x000008000000 : “backup”
<5>[ 5.091215] 0x000008000000-0x000010000000 : “cache”
<5>[ 5.092032] 0x000010000000-0x000050000000 : “userdata”
<5>[ 5.093836] 0x000050000000-0x000050400000 : “kpanic”
<6>[ 5.095276] apanic: Bound to mtd partition ‘kpanic’
<6>[ 5.095290] apanic: No panic data available
<5>[ 5.095312] 0x000050400000-0x000082400000 : “system”
<5>[ 5.097001] 0x000082400000-0x0000ed200000 : “user”
<4>[ 5.099583] startBlk = 80 sysProtAddr = 79
<6>[ 5.196238] EXT4-fs (mtdblock8): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
<6>[ 5.438596] EXT4-fs (mtdblock6): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
<6>[ 5.582263] EXT4-fs (mtdblock5): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
<4>[ 5.588042] UMP: Using OS memory backend, allocation limit: 536870912
<4>[ 5.588064] UMP: UMP device driver loaded
<4>[ 5.623372] Mali: init_mali_clock mali_clock c0a5f900
<4>[ 5.638950] Mali: [MENTION=5839521 [MENTION=1065870 [user=1879310]@@@@[/user][/MENTION][/MENTION]@Mali device driver loaded success [MENTION=5839521 [MENTION=1065870 [user=1879310]@@@@[/user][/MENTION][/MENTION]@
<4>[ 5.639758] rk29_ipp: module is from the staging directory, the quality is unknown, you have been warned.
<4>[ 5.643932] ipp irq 47
<4>[ 5.644762] IPP init, version rk30-ipp 1.003
<4>[ 5.670171] mirroring: Unknown symbol video_data_to_mirroring (err 0)
<4>[ 5.670233] mirroring: Unknown symbol audio_data_to_mirroring (err 0)
<3>[ 5.892652] init: skipping insecure file ‘/data/local.prop’
<3>[ 6.040235] init: cannot find ‘/system/vendor/bin/pvrsrvctl’, disabling ‘pvrsrvctl’
<3>[ 6.051610] init: cannot find ‘/system/etc/install-recovery.sh’, disabling ‘flash_recovery’
<3>[ 6.062798] init: cannot find ‘/system/bin/hald’, disabling ‘hald’
<4>[ 6.102956] vpu: power on
<6>[ 6.105653] VPU_SERVICE: checking hw id 4831
<4>[ 6.110654] vpu: power off…done
<6>[ 6.114009] VPU_SERVICE: init success
<3>[ 6.154931] init: property ‘ro.serialno’ doesn’t exist while expanding ‘${ro.serialno}’
<3>[ 6.162994] init: cannot expand ‘${ro.serialno}’ while writing to ‘/sys/class/android_usb/android0/iSerial’
<3>[ 6.173234] init: using deprecated syntax for specifying property ‘ro.product.usbfactory’, use ${name} instead
<6>[ 6.215694] .409.. MMC0 receive the message sd-No-Media from VOLD.[sd_mmc]
<6>[ 6.215721] .440.. MMC0 receive the message No-Media from VOLD. waitTimes=0 [sd_mmc]
<6>[ 6.308052] .409.. MMC0 receive the message sd-Pending from VOLD.[sd_mmc]
<6>[ 6.310821] .409.. MMC0 receive the message sd-Idle-Unmounted from VOLD.[sd_mmc]
<4>[ 6.311330] [rknand_sys_storage_ioctl:90] rknand_sys_storage_ioctl in
<4>[ 6.311347] [rknand_sys_storage_ioctl:103] RKNAND_GET_DRM_KEY
<4>[ 6.311362] [rknand_sys_storage_ioctl:365] return ret = 0
<3>[ 6.311893] android_usb: already disabled
<6>[ 6.325727] adb_open
<3>[ 8.189655] gc2035 sensor_ioctl cmd(0x3) is unknown !
<3>[ 8.296864] gc0308 sensor_ioctl cmd(0x3) is unknown !
<4>[ 8.845225] rk fb use 3 buffers
<6>[ 19.304980] DWC_OTG: ********vbus detect*********************************************
<6>[ 19.508432] DWC_OTG: ********soft connect!!!*****************************************
<6>[ 19.514435] DWC_OTG: USB SUSPEND
<6>[ 19.610207] DWC_OTG: USB RESET
<6>[ 19.722420] android_work: sent uevent USB_STATE=CONNECTED
<6>[ 19.725849] DWC_OTG: USB RESET
<6>[ 19.770708] warning: `zygote’ uses 32-bit capabilities (legacy support in use)
<6>[ 19.789466] alarm_set_rtc: no RTC, time will be lost on reboot
<6>[ 19.851344] android_usb gadget: high speed config #1: android
<6>[ 19.851553] android_work: sent uevent USB_STATE=CONFIGURED
<4>[ 20.986377] rk30_adc_battery_poweron_capacity_check……..new_capacity=30,old_capacity=16
<4>[ 20.986404] rk30_adc_battery_poweron_capacity_check…bat ->bat_capacity=16,new_capacity=30,old_capacity=16
<4>[ 33.490421] =======================================================
<4>[ 33.496763] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
<4>[ 33.504244] =======================================================
<6>[ 33.510184] acc_open
<6>[ 33.510208] acc_release
<4>[ 33.510695] Realtek 8188EU USB WiFi driver (Powered by Rockchip,Ver 1.12) init.
<4>[ 33.522799] wifi_usb_init
<4>[ 33.525500] wifi_activate_usb
<6>[ 33.934438] usbcore: registered new interface driver rtl8188eu
<4>[ 34.846224] cfg80211_rtw_change_iface, old_iftype=6, new_iftype=2
<6>[ 34.847300] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<4>[ 36.294939] bssid=ce:06:13:cb:eb:14
<4>[ 36.294959] matched by bssid
<4>[ 36.295436] rtw_cfg80211_set_wpa_version, wpa_version=1
<4>[ 36.295454] got wpa_ie
<6>[ 36.393509] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<6>[ 40.970833] .409.. MMC0 receive the message sd-Checking from VOLD.[sd_mmc]
<6>[ 40.989720] .409.. MMC0 receive the message sd-Mounted from VOLD.[sd_mmc]
<3>[ 41.028905] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
<6>[ 44.473253] alarm_set_rtc: no RTC, time will be lost on reboot
<3>[ 73.296942] init: untracked pid 1495 exited
<6>[ 124.382944] Enter::es8323_pcm_startup—-805 es8323->sysclk=11289600
<6>[ 124.383046] Enter::rk29_hw_params—-47
<6>[ 124.383061] es8323_set_dai_fmt—-703, fmt[3000]
<6>[ 124.383071] es8323 in slave mode
<6>[ 124.384192] Enter:rk29_hw_params, 99, rate=44100
<6>[ 124.384211] Enter:rk29_hw_params, 107, LRCK=64
<4>[ 124.410163] fun:es8328_dapm_pre_event, event:1
<6>[ 124.410200] Enter::es8323_set_bias_level—-929 level =2
<4>[ 124.422000] fun:es8328_dapm_pre_event, event:1
<6>[ 124.422023] Enter::es8323_set_bias_level—-929 level =2
<4>[ 124.423929] fun:es8328_dapm_post_event, event:2
<4>[ 124.423946] fun:es8328_dapm_post_event, event:2
<6>[ 124.441070] Enter::es8323_set_bias_level—-929 level =3
<4>[ 124.446543] Enter::es8323_mute—-888–mute=0
<4>[ 128.263811] Enter::es8323_mute—-888–mute=1
<4>[ 133.315434] fun:es8328_dapm_pre_event, event:4
<4>[ 133.315455] fun:es8328_dapm_pre_event, event:4
<4>[ 133.315467] fun:es8328_dapm_post_event, event:8
<6>[ 133.315481] Enter::es8323_set_bias_level—-929 level =1
<4>[ 133.318559] fun:es8328_dapm_post_event, event:8
<6>[ 133.318574] Enter::es8323_set_bias_level—-929 level =1
<3>[ 182.858393] init: untracked pid 1485 exited
<3>[ 187.694941] init: untracked pid 1854 exited
<3>[ 193.742567] init: untracked pid 1427 exited
<6>[ 234.724866] input input0: adkey[vol+]: report ev[115] state[1]
<6>[ 234.814872] input input0: adkey[vol+]: report ev[115] state[0]
rkflashkit log
the RKFlashKit log:
============= 2014-11-09 10:00:14 ============
Loading partition information
MACHINE_MODEL:rk30sdk MACHINE_ID:007 MANUFACTURER:RK30SDK MAGIC: 0x5041524B ATAG: 0x60000800 MACHINE: 3066 CHECK_MASK: 0x80 KERNEL_IMG: 0x60408000 #RECOVER_KEY: 1,1,0,20,0 CMDLINE: console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x00800000 mtdparts=rk29xxnand:[email protected](misc),[email protected](kernel),[email protected](boot),[email protected](recovery),[email protected](backup),[email protected](cache),[email protected](userdata),[email protected](kpanic),[email protected](system),[email protected](user)
============= 2014-11-09 10:03:01 ============
Writing file /media/samuel/1A86-DFE7/recovery de test/recovery.img to partition [email protected]
writing flash memory at offset 0x00010000
writing flash memory at offset 0x00011000
writing flash memory at offset 0x00012000
writing flash memory at offset 0x00013000
writing flash memory at offset 0x00014000
Done!
Comparing partition [email protected] with file /media/samuel/1A86-DFE7/recovery de test/recovery.img
reading flash memory at offset 0x00010000
reading flash memory at offset 0x00011000
reading flash memory at offset 0x00012000
reading flash memory at offset 0x00013000
reading flash memory at offset 0x00014000
Done!
************ :
pffffff !!!
don’t work again ;-( pipo smart S1 cwm unpacked and repacked with mkbootimg (my recovery.img-kernel.gz + recovery.img-ramdisk.cpio.gz) ….
realy lost
ok ….
progress ... progress
so my tab is an ” KidsPad 3 “
this cwm work like it is : http://www.filefactory.com/file/605l7c1mh11n/n/Pipo_S1_CWM_by_Danyrolux_rar
but no way to do a nandroid backup “it look like don’t find the good partition”.
if I want to repack it with my original recovery.img, I have to keep the original kernel (from original recovery.img) and the ramdisk from this cwm ..? right ?
the original recovery.img unpack :
[email protected]:/media/samuel/1A86-DFE7/mytools$ sudo perl unpack-bootimg.pl recovery.img
[sudo] password for samuel:
kernel written to recovery.img-kernel.gz
ramdisk written to recovery.img-ramdisk.cpio.gz
cpio: ../init: impossible de créer un lien symbolique vers “sbin/ueventd”: Opération non permise
gzip: ../recovery.img-ramdisk.cpio.gz: decompression OK, trailing garbage ignored
29922 blocs
extracted ramdisk contents to directory recovery.img-ramdisk/
[email protected]:/media/samuel/1A86-DFE7/mytools$
the cwm pipo smart s1 recovery.img unpack :
[email protected]:/media/samuel/1A86-DFE7/mytools# perl unpack-bootimg.pl recovery.img
kernel written to recovery.img-kernel.gz
ramdisk written to recovery.img-ramdisk.cpio.gz
5942 blocs
extracted ramdisk contents to directory recovery.img-ramdisk/
[email protected]:/media/samuel/1A86-DFE7/mytools#
the repack :
[email protected]:~/Bureau/mytools# perl repack-bootimg.pl recovery.img-kernel.gz recovery.img-ramdisk/ reovery.img
5942 blocs
repacked boot image written at recovery.img-ramdisk/-repack.img
[email protected]:~/Bureau/mytools#
*************************
after reboot in recovery mode … the recovery is stil the original recovery ??? I don’t understand.
repacked the original recovery + the cwm ramdisk .
Have you checked with these guys: http://androtab.info/clockworkmod/rockchip/rk3066/
or here: http://forum.xda-developers.com/showthread.php?t=2102679 ?
They work for rokchip cwm too.
helo, thank you for your answer !
yes I read these post and tried the generic CWM (RK3066).
But it don't work with my device.
moreover I don't want pollute there topic with two page of my dmesg :
I would like to build it myself to understand the good way ..
not only ask "can you do it for me ? my device is ...).
Have you any idea about what I doind rong ?
I can provide the boot.img and recovery.img
http://ovh.to/jgiYdg
@+
samco08 said:
helo, thank you for your answer !
yes I read these post and tried the generic CWM (RK3066).
But it don't work with my device.
moreover I don't want pollute there topic with two page of my dmesg :
I would like to build it myself to understand the good way ..
not only ask "can you do it for me ? my device is ...).
Have you any idea about what I doind rong ?
I can provide the boot.img and recovery.img
http://ovh.to/jgiYdg
@+
Click to expand...
Click to collapse
That was the point. I asked you about those guys because they must have a proper device tree to build and you can use that as template to create one for your device. Then you can build any recovery you want. I'm not familiar with rockchip and I can't tell you much, but they probably can... if they want of course.
Besides that I played a little with your files and I repacked that working cwm with your kernel: http://d-h.st/VBK
I don't know if it works, but if it does use it.
Cheers!
carliv said:
That was the point. I asked you about those guys because they must have a proper device tree to build and you can use that as template to create one for your device. Then you can build any recovery you want. I'm not familiar with rockchip and I can't tell you much, but they probably can... if they want of course.
Besides that I played a little with your files and I repacked that working cwm with your kernel: http://d-h.st/VBK
I don't know if it works, but if it does use it.
Cheers!
Click to expand...
Click to collapse
Thank you very much !
but the problem is the same with your recovery
When I reboot, the recovery is the stock recovery ...
I tried with the PIPO Smart S1 cwm (480 x 800) and it work.... but I met an issue with partition ... no way to do a nandroid Backup !
any idea ?
samco08 said:
Thank you very much !
but the problem is the same with your recovery
When I reboot, the recovery is the stock recovery ...
I tried with the PIPO Smart S1 cwm (480 x 800) and it work.... but I met an issue with partition ... no way to do a nandroid Backup !
any idea ?
Click to expand...
Click to collapse
If after flashing recovery it stay unchanged, then the problem is the flashing process. Maybe there is a security or checksum check somewhere and if it doesn't meet requirements it doesn't actually flash the recovery...
I don't know what else to say.
carliv said:
If after flashing recovery it stay unchanged, then the problem is the flashing process. Maybe there is a security or checksum check somewhere and if it doesn't meet requirements it doesn't actually flash the recovery...
I don't know what else to say.
Click to expand...
Click to collapse
yes ...
the PIPO smart S1 CWM flash and start correctly but no way to do a nandroid backup.(partition problem)
Maybe I have to pick up a file in this recovery to repack it in my own recovery.
but witch ?
@+
nobody ?

[DUMP][ROM][PONO] Player Firmware Update FILE 1.0.3 (Gingerbread) (Complete Rom)

Just pulled from my pono player which is based on android (API Level 10)
For people rocking linux and want to update theyre Pono to the latest Firmware 1.0.3 put this file on your ponoplayer drive in .pono/
MIND THE LEADING DOT.
Reboot you're player afterwards and updating should start
DISCLAIMER:
im not responsible for bricks, i just pulled this file as is from my pono.
There wasnt any modification done.
https://file-cloud.eu/public.php?service=files&t=8a42782613be966425cbb4e65290788a
Maybe someone can have a look at it and find out how to enable adb in this rom?
Some additional Device info:
partition table:
Code:
major minor #blocks name
31 0 512 mtdblock0
31 1 1920 mtdblock1
31 2 128 mtdblock2
31 3 4096 mtdblock3
31 4 517632 mtdblock4
179 0 61063168 mmcblk0
179 1 128 mmcblk0p1
179 2 512 mmcblk0p2
179 3 128 mmcblk0p3
179 4 8192 mmcblk0p4
179 5 8192 mmcblk0p5
179 6 262144 mmcblk0p6
179 7 262144 mmcblk0p7
179 8 131072 mmcblk0p8
179 9 131072 mmcblk0p9
179 10 60259072 mmcblk0p10
179 16 62367744 mmcblk1
179 17 62351360 mmcblk1p1
DMESG:
Code:
<5>Linux version 2.6.37 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 Wed Nov 5 16:36:29 PST 2014
<4>CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
<4>CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>Machine: OMAP3 Beagle Board
<6>Reserving 8388608 bytes SDRAM for VRAM
<4>Memory policy: ECC disabled, Data cache writeback
<6>OMAP3630 ES1.2 (l2cache sgx neon isp 192mhz_clk )
<6>SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000
<7>On node 0 totalpages: 63488
<7>free_area_init_node: node 0, pgdat c05e19e4, node_mem_map c06ad000
<7> Normal zone: 512 pages used for memmap
<7> Normal zone: 0 pages reserved
<7> Normal zone: 62976 pages, LIFO batch:15
<7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>pcpu-alloc: [0] 0
<4>Built 1 zonelists in Zone order, mobility grouping on. Total pages: 62976
<5>Kernel command line: console=ttyO2,115200n8 androidboot.console=ttyO2 mem=256M init=/init ip=off omap_vout.vid1_static_vrfb_alloc=y vram=8M omapfb.vram=0:8M
<6>PID hash table entries: 1024 (order: 0, 4096 bytes)
<6>Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>Memory: 248MB = 248MB total
<5>Memory: 243884k/243884k available, 18260k reserved, 0K highmem
<5>Virtual kernel memory layout:
<5> vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5> fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5> DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
<5> vmalloc : 0xd0800000 - 0xf8000000 ( 632 MB)
<5> lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
<5> modules : 0xbf000000 - 0xc0000000 ( 16 MB)
<5> .init : 0xc0008000 - 0xc003c000 ( 208 kB)
<5> .text : 0xc003c000 - 0xc059e000 (5512 kB)
<5> .data : 0xc059e000 - 0xc05e6e80 ( 292 kB)
<6>NR_IRQS:409
<6>Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
<6>Reprogramming SDRC clock to 400000000 Hz
<3>dpll3_m2_clk rate change failed: -22
<6>IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
<6>Total of 96 interrupts on 1 active controller
<6>GPMC revision 5.0
<4>Trying to install interrupt handler for IRQ402
<4>Trying to install interrupt handler for IRQ403
<4>Trying to install interrupt handler for IRQ404
<4>Trying to install interrupt handler for IRQ405
<4>Trying to install interrupt handler for IRQ406
<4>Trying to install interrupt handler for IRQ407
<4>Trying to install interrupt handler for IRQ408
<3>Trying to install type control for IRQ409
<3>Trying to set irq flags for IRQ409
<6>OMAP clockevent source: GPTIMER12 at 32768 Hz
<4>Console: colour dummy device 80x30
<6>Calibrating delay loop... 503.12 BogoMIPS (lpj=1966080)
<6>pid_max: default: 32768 minimum: 301
<6>Security Framework initialized
<4>Mount-cache hash table entries: 512
<6>CPU: Testing write buffer coherency: ok
<6>regulator: core version 0.5
<6>regulator: dummy:
<6>NET: Registered protocol family 16
<6>OMAP GPIO hardware version 2.5
<6>OMAP GPIO hardware version 2.5
<6>OMAP GPIO hardware version 2.5
<6>OMAP GPIO hardware version 2.5
<6>OMAP GPIO hardware version 2.5
<6>OMAP GPIO hardware version 2.5
<6>omap_mux_init: Add partition: #1: core, flags: 0
<6>OMAP3 Pono Rev: A
<6>Found NAND on CS0
<6>Registering NAND on CS0
<3>Unable to get DVI reset GPIO
<6>hw-breakpoint: debug architecture 0x4 unsupported.
<6>OMAP DMA hardware revision 5.0
<4>bio: create slab <bio-0> at 0
<6>regulator: vdd_tp: 3300 mV normal
<6>regulator: EMMC_3V3: 3300 mV normal
<5>SCSI subsystem initialized
<6>usbcore: registered new interface driver usbfs
<6>usbcore: registered new interface driver hub
<6>usbcore: registered new device driver usb
<6>omap_i2c omap_i2c.1: bus 1 rev4.0 at 2600 kHz
<6>twl4030: PIH (irq 7) chaining IRQs 368..375
<6>twl4030: power (irq 373) chaining IRQs 376..383
<6>twl4030: gpio (irq 368) chaining IRQs 384..401
<6>regulator: VUSB1V5: 1500 mV normal standby
<6>regulator: VUSB1V8: 1800 mV normal standby
<6>regulator: VUSB3V1: 3100 mV normal standby
<6>twl4030_usb twl4030_usb: Initialized TWL4030 USB module
<6>regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
<6>regulator: VDAC: 1800 mV normal standby
<6>regulator: VAUX2_4030: 2500 mV normal standby
<6>regulator: VDVI: 1800 mV normal standby
<6>regulator: VAUX3: 1800 mV normal standby
<6>regulator: VAUX4: 1800 mV normal standby
<4>omap_device: omap_i2c.1: new worst case deactivate latency 0: 30517
<6>omap_i2c omap_i2c.2: bus 2 rev4.0 at 100 kHz
<6>omap_i2c omap_i2c.3: bus 3 rev4.0 at 400 kHz
<6>Advanced Linux Sound Architecture Driver Version 1.0.23.
<6>Switching to clocksource 32k_counter
<6>musb-hdrc: version 6.0, otg (peripheral+host), debug=0
<6>musb-hdrc musb-hdrc.0: dma type: dma-inventra
<7>musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
<7>musb-hdrc: MHDRC RTL version 1.800
<7>musb-hdrc: setup fifo_mode 4
<7>musb-hdrc: 28/31 max ep, 16384/16384 memory
<6>musb-hdrc musb-hdrc.0: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
<6>NET: Registered protocol family 2
<6>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>TCP established hash table entries: 8192 (order: 4, 65536 bytes)
<6>TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
<6>TCP: Hash tables configured (established 8192 bind 8192)
<6>TCP reno registered
<6>UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>NET: Registered protocol family 1
<6>Trying to unpack rootfs image as initramfs...
<6>Freeing initrd memory: 940K
<4>NetWinder Floating Point Emulator V0.97 (double precision)
<4>omap_init_opp_table: no hwmod or odev for iva, [6] cannot add OPPs.
<6>omap-iommu omap-iommu.0: isp registered
<6>ashmem: initialized
<5>VFS: Disk quotas dquot_6.5.2
<4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
<6>JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
<7>yaffs: yaffs built Nov 5 2014 16:36:02 Installing.
<6>msgmni has been set to 478
<6>io scheduler noop registered
<6>io scheduler deadline registered
<6>io scheduler cfq registered (default)
<6>OMAP DSS rev 2.0
<6>OMAP DISPC rev 3.0
<7>tm024hbz79 spi3.0: tm024hbz79_spi_probe
<7>panel-tm024hbz79 display0: tm024_panel_probe
<7>tm024hbz79 spi3.0: LCD panel not enabled by bootloader (status 0x610000)
<7>tm024hbz79 spi3.0: MIPI display ID: 000000
<6>tm024hbz79 spi3.0: omapfb: tm024hbz79 rev 00 LCD detected
<3>get_hw_cabc_mode: enter...
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<6>Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
<6>omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
<6>omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
<6>omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
<6>console [ttyO2] enabled
<6>omap_uart.3: ttyO3 at MMIO 0x49042000 (irq = 80) is a OMAP UART3
<6>brd: module loaded
<6>loop: module loaded
<3>mtdoops: mtd device (mtddev=name/number) must be supplied
<6>omap2-nand driver initializing
<6>NAND device: Manufacturer ID: 0x2c, Chip ID: 0xbc (Micron )
<6>NAND BCH ECC SW Init complete
<5>Creating 5 MTD partitions on "omap2-nand.0":
<5>0x000000000000-0x000000080000 : "X-Loader"
<5>0x000000080000-0x000000260000 : "U-Boot"
<5>0x000000260000-0x000000280000 : "U-Boot Env"
<5>0x000000280000-0x000000680000 : "Kernel"
<5>0x000000680000-0x000020000000 : "File System"
<6>OneNAND driver initializing
<6>usbcore: registered new interface driver asix
<6>usbcore: registered new interface driver cdc_ether
<6>usbcore: registered new interface driver smsc95xx
<6>usbcore: registered new interface driver net1080
<6>usbcore: registered new interface driver cdc_subset
<6>usbcore: registered new interface driver zaurus
<6>Initializing USB Mass Storage driver...
<6>usbcore: registered new interface driver usb-storage
<6>USB Mass Storage support registered.
<6>android init
<6>android_probe pdata: c05aeb0c
<6>android_bind
<7>android_bind_config
<6>android_usb gadget: android_usb ready
<6>musb-hdrc musb-hdrc.0: MUSB HDRC host driver
<6>musb-hdrc musb-hdrc.0: new USB bus registered, assigned bus number 1
<6>usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>usb usb1: Product: MUSB HDRC host driver
<6>usb usb1: Manufacturer: Linux 2.6.37 musb-hcd
<6>usb usb1: SerialNumber: musb-hdrc.0
<6>hub 1-0:1.0: USB hub found
<6>hub 1-0:1.0: 1 port detected
<6>f_adb init
<6>android_register_function adb
<6>f_mass_storage init
<6>fsg_probe pdev: c05ae910, pdata: c05aebd4
<6>android_register_function usb_mass_storage
<6>android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>android_usb gadget: Number of LUNs=2
<6> lun0: LUN: removable file: (no medium)
<6> lun1: LUN: removable file: (no medium)
<6>mice: PS/2 mouse device common for all mice
<6>input: gpio-keys as /devices/platform/gpio-keys/input/input0
<6>ft5x06_init() - FT I2C Touchscreen Driver (Built Nov 5 2014 @ 16:36:01)
<7>ft5x06_reset_panel_via_gpio() - Toggling GPIO 42 to reset the Touch Panel...
<6>android_usb gadget: high speed config #1: android
<4>omap_device: omap_i2c.2: new worst case activate latency 0: 30517
<6>ft5x06_probe() - FT5x06 found on I2C bus.
<6>input: ft5x06-i2c as /devices/platform/omap/omap_i2c.2/i2c-2/2-0038/input/input1
<6>ft5x06_initialize() - sysfs_create_group() succeeded.
<6>Bosch Sensortec Device detected!
<6>bma220 registered I2C driver!
<6>input: acc as /devices/virtual/input/input2
<6>using rtc device, twl_rtc, for alarms
<6>twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
<6>i2c /dev entries driver
<6>Linux media interface: v0.10
<6>Linux video capture interface: v2.00
<6>max17040 2-0036: MAX17040 Fuel-Gauge Ver 02
<3>bq24073-chgr bq24073-chgr: Initialized
<7>bq24073-chgr bq24073-chgr: bq24392_charger_work: 0
<6>OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
<3>twl4030_wdt twl4030_wdt: Failed to register misc device
<4>twl4030_wdt: probe of twl4030_wdt failed with error -16
<6>device-mapper: uevent: version 1.0.3
<6>device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: [email protected]
<6>cpuidle: using governor ladder
<6>cpuidle: using governor menu
<7>Registered led device: pono::light
<6>omap_pwm_led omap_pwm_led: OMAP PWM LED (pono::lcd) at GP timer 11/0
<7>Registered led device: pono::lcd
<6>usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
<6>logger: created 64K log 'log_main'
<6>logger: created 256K log 'log_events'
<6>logger: created 64K log 'log_radio'
<6>logger: created 64K log 'log_system'
<6>exFAT: FS Version 1.2.4
<6>exFAT: Core Version 1.2.4
<6>usbcore: registered new interface driver snd-usb-audio
<6>OMAP3 Pono SoC init
<6>ALSA device list:
<6> No soundcards found.
<6>oprofile: hardware counters not available
<6>oprofile: using timer interrupt.
<6>TCP cubic registered
<6>Initializing XFRM netlink socket
<6>NET: Registered protocol family 17
<6>NET: Registered protocol family 15
<5>Registering the dns_resolver key type
<6>VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
<6>ThumbEE CPU extension supported.
<3>Power Management for TI OMAP3.
<6>smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
<6>smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
<6>SmartReflex Class3 initialized
<6>clock: disabling unused clocks to save power
<6>mmc0: new high speed MMC card at address 0001
<6>mmcblk0: mmc0:0001 CWBC3R 58.2 GiB
<4>Alternate GPT is invalid, using primary GPT.
<6> mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10
<7>panel-tm024hbz79 display0: tm024_panel_enable
<7>panel-tm024hbz79 display0: tm024_panel_power_on
<4>omapdss DPI: Could not find exact pixel clock. Requested 6200 kHz, got 6171 kHz
<7>tm024hbz79 spi3.0: panel_setup
<3>set_sleep_mode: enter...
<4>mmc1: host does not support reading read-only switch. assuming write-enable.
<3>set_display_state: enter...
<6>mmc1: new high speed SDHC card at address e624
<6>mmcblk1: mmc1:e624 SL64G 59.4 GiB
<6> mmcblk1: p1
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<4>regulator_init_complete: incomplete constraints, leaving VAUX3 on
<4>regulator_init_complete: incomplete constraints, leaving VDAC on
<6>twl_rtc twl_rtc: setting system clock to 2000-01-11 17:18:42 UTC (947611122)
<7>panel-tm024hbz79 display0: tm024_panel_enable
<7>panel-tm024hbz79 display0: tm024_panel_power_on
<7>panel-tm024hbz79 display0: tm024_panel_enable
<7>panel-tm024hbz79 display0: tm024_panel_power_on
<6>omap_vout omap_vout: Buffer Size = 3686400
<6>omap_vout omap_vout: : registered and initialized video device 0
<6>omap_vout omap_vout: Buffer Size = 3686400
<6>omap_vout omap_vout: : registered and initialized video device 1
<6>Freeing init memory: 208K
<6>EXT4-fs (mmcblk0p7): recovery complete
<6>EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
<6>EXT4-fs (mmcblk0p9): recovery complete
<6>EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null)
<4>EXT4-fs (mmcblk0p8): warning: maximal mount count reached, running e2fsck is recommended
<6>EXT4-fs (mmcblk0p8): recovery complete
<6>EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
<4>init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<4>omap_device: smartreflex.1: new worst case activate latency 0: 30517
<7>ft5x06_tpreset_show() - Resetting Touch Panel
<7>ft5x06_reset_panel_via_gpio() - Toggling GPIO 42 to reset the Touch Panel...
<6>asoc: ponoaudio-hifi <-> omap-mcbsp-dai.1 mapping ok
<3>init: cannot find '/system/bin/sgx/rc.pvr', disabling 'pvr'
<4>omap_device: smartreflex.0: new worst case deactivate latency 0: 30517
<4>omap_device: omap_i2c.3: new worst case activate latency 0: 61035
<4>omap_device: omap_uart.3: new worst case deactivate latency 0: 30517
<4>omap_device: omap_uart.3: new worst case activate latency 0: 30517
<6>warning: `zygote' uses 32-bit capabilities (legacy support in use)
<6>request_suspend_state: wakeup (3->0) at 11983917243 (2000-01-11 17:18:51.062377931 UTC)
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<4>omap_device: omap_uart.2: new worst case activate latency 0: 457763
<4>[EXFAT] trying to mount...
<4>[EXFAT] mounted successfully
<4>omap_device: omap_uart.2: new worst case activate latency 0: 915527
<4>omap_device: omap_uart.2: new worst case activate latency 0: 4455566
<4>omap_device: omap_uart.2: new worst case activate latency 0: 4547119
<4>omap_device: omap_uart.2: new worst case activate latency 0: 4791259
<4>omap_device: omap_uart.2: new worst case activate latency 0: 4821777
<4>omap_device: omap_uart.3: new worst case activate latency 0: 6225585
<4>omap_device: omap_uart.2: new worst case activate latency 0: 6988525
<4>omap_device: omap_i2c.2: new worst case deactivate latency 0: 91552
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<4>omap_device: omap_uart.2: new worst case activate latency 0: 7354736
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<6>EXT4-fs (mmcblk0p7): re-mounted. Opts: (null)
<6>EXT4-fs (mmcblk0p7): re-mounted. Opts: (null)
<4>omap_device: omap_uart.2: new worst case activate latency 0: 8178710
<4>omap_device: omap_uart.2: new worst case activate latency 0: 10253906
<4>[EXFAT] trying to unmount...
<4>[EXFAT] unmounted successfully
<6>binder: 1310:1311 transaction failed 29189, size 84-0
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=0
<6>request_suspend_state: sleep (0->3) at 170425236611 (2000-01-11 17:21:29.503666784 UTC)
<6>ft5x06_suspend() - Driver is suspending.
<6>request_suspend_state: wakeup (3->0) at 267929729460 (2000-01-11 17:23:07.008190148 UTC)
<6>ft5x06_resume() - Driver is resuming.
<7>ft5x06_reset_panel_via_gpio() - Toggling GPIO 42 to reset the Touch Panel...
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<7>tm024hbz79 spi3.0: tm024hbz79_bl_update_status: level=255
<4>omap_device: omap_uart.2: new worst case activate latency 0: 11932373
<4>omap_device: omap_uart.2: new worst case activate latency 0: 13793945
<3>init: untracked pid 1691 exited
<4>omap_device: omap_uart.2: new worst case activate latency 0: 279388427
<4>[EXFAT] trying to mount...
<4>[EXFAT] mounted successfully
Mounted FileSystems:
Code:
rootfs / rootfs ro,relatime 0 0
tmpfs /dev tmpfs rw,relatime,mode=755 0 0
devpts /dev/pts devpts rw,relatime,mode=600 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0
/dev/block/platform/mmci-omap-hs.1/by-name/system /system ext4 ro,relatime,barrier=1,data=ordered 0 0
/dev/block/platform/mmci-omap-hs.1/by-name/userdata /data ext4 rw,relatime,barrier=1,data=ordered 0 0
/dev/block/platform/mmci-omap-hs.1/by-name/cache /cache ext4 rw,relatime,barrier=1,data=ordered 0 0
debugfs /sys/kernel/debug debugfs rw,relatime 0 0
/dev/block/vold/179:10 /mnt/internal vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
/dev/block/vold/179:10 /mnt/secure/asec vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
tmpfs /mnt/internal/.android_secure tmpfs ro,relatime,size=0k,mode=000 0 0
/dev/block/vold/179:17 /mnt/sdcard exfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=utf8,namecase=0,errors=remount-ro 0 0
/dev/block/vold/179:17 /mnt/secure/asec exfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=utf8,namecase=0,errors=remount-ro 0 0
tmpfs /mnt/sdcard/.android_secure tmpfs ro,relatime,size=0k,mode=000 0 0
build.prop:
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GRJ22
ro.build.display.id=pono-eng 1.0.3 GRJ22 eng.daveg.20141105.164641 test-keys
ro.build.version.incremental=eng.daveg.20141105.164641
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=1.0.3
ro.build.date=Wed Nov 5 16:46:58 PST 2014
ro.build.date.utc=1415234818
ro.build.type=eng
ro.build.user=daveg
ro.build.host=ubuntu
ro.build.tags=test-keys
ro.product.model=NY001
ro.product.brand=PonoMusic
ro.product.name=pono
ro.product.device=pono
ro.product.board=pono
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=unknown
ro.product.locale.language=mdpi
ro.product.locale.region=
ro.wifi.channels=
ro.board.platform=omap3
# ro.build.product is obsolete; use ro.product.device
ro.build.product=pono
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=pono-eng 1.0.3 GRJ22 eng.daveg.20141105.164641 test-keys
ro.build.fingerprint=PonoMusic/pono/pono:1.0.3/GRJ22/eng.daveg.20141105.164641:eng/test-keys
# end build properties
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
dalvik.vm.heapsize=24m
ro.kernel.android.checkjni=1
ro.setupwizard.mode=OPTIONAL
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
persist.service.adb.enable=1
persist.service.debuggable=1
init.svc.adbd=running
persist.sys.usb.config=mass_storage,adb
recovery last_log: http://pastebin.com/zqKy119L
LOGCAT: http://pastebin.com/JjD2KjTR
Took a quick look.
/default.prop:
persist.service.adb.enable=1
ro.secure=0
/init.rc:
on property: persist.service.adb.enable=1
start adbd
/sbin/adbd binary present
Also present:
/diags/busybox
/system/xbin/su
/system/app/Term.apk (v1.0.3)
If you can find a way to start this terminal (activity com.android.term/.Term)
perhaps a Diag mode? and then start /system/xbin/su
So everything looks ok for adb. But if it is passed through USB?
You can try adb over Wifi if you know the ip address of your Pono.
EDIT: just learned Pono has no wifi...
Recovery mode? I see /sdcard/package.zip in /system/bin/recovery binary.
/package.zip
Choose a package to install:
update_package
Finding update package...
Opening update package...
Verifying update package...
Package not installed
Good luck.
mhm package.zip is new to me, that would be very helpful if that works, i will try to install a rom using that location instead of internal storage/.pono/anyrom.update
I have a launcher already installed and a customized rom.
I can flash stuff using android test-key signed rom zip's
Why would they have ADB running if there's no way to access it? I have tried what I can to access it over USB, but so far no luck.
I repartitioned my internal SD card and lost access to my player. The player boots fine, but it just shows 0.0 GB of 0.0 GB free and won't prompt me to mount the disks as mass storage when I plug it to my PC, so I can't repartition the storage again. Therefore I need ADB access
tweakradje said:
Took a quick look.
/default.prop:
persist.service.adb.enable=1
ro.secure=0
/init.rc:
on property: persist.service.adb.enable=1
start adbd
/sbin/adbd binary present
Also present:
/diags/busybox
/system/xbin/su
/system/app/Term.apk (v1.0.3)
If you can find a way to start this terminal (activity com.android.term/.Term)
perhaps a Diag mode? and then start /system/xbin/su
So everything looks ok for adb. But if it is passed through USB?
You can try adb over Wifi if you know the ip address of your Pono.
EDIT: just learned Pono has no wifi...
Recovery mode? I see /sdcard/package.zip in /system/bin/recovery binary.
/package.zip
Choose a package to install:
update_package
Finding update package...
Opening update package...
Verifying update package...
Package not installed
Good luck.
Click to expand...
Click to collapse
Maybe this option is missing to get adb to work:
persist.sys.usb.config=mass_storage,adb
nope, tried that option aswell already, adbd on the device is running tough...
i wonder if there is another unpropagated USB connection inside the pono just for debugging stuff...
old firmware file?
does anyone have a copy of a pre 1.0.6 firmware update file. since 1.0.6 the internal storage is mega slow - and have searched high and low to see if i could roll back. thanks in advance.
Hi everyone,
I know this thread is 6 years old, but...
I'm realizing that I'm not using my Pono for years, mostly because of the incomplete UI. I'm more a developer than an Android expert, so I'd like some help in order to get started.
I have basic knowledge of Android (adb, apk, all that wizardry), basic reverse skills and pretty good knowledge of Linux.
So here is my questions to you
- How did Psych0_D0g extract the logcat logs? To me, having logcat means that he did actually make adb work.
- how did he extract the recovery log? I didn't find any was to boot into recovery (pressing volume Up and boot, or volume down, or both..)
Next step for me will be able to generate a firmware update image in order to add/remove what I need..
Thanks for any help!

Categories

Resources