Building my own CWM recovery...but need help. - Miscellaneous Android Development

Hello.
could you please help me to flash my device ?
it’s a RK30** based device (maybe a RK3066).
I have yet tested a lot of possibility….. but now way to flash a custom recovery ;-(
I would like install TWRP or CWM
I tested :
Arctools.apk (don’t work) / room manager (don’t work) / a batch tool adb installer (don’t work) / fastboot in bootloader mode (don’t work_no device detected) / directly flash some update.zip from the original recovery (don’t work).
My device is rooted buit nothing work for me.
I tried also to flash diferent recovery.img from RKFLASHKIT (ubuntu inside ).
so…. i’m a little bit lost.
For security I dumped these originals partitions :
misc.img
recovery.img
boot.img
kernel.img
I can also provide a complete dmesg in a second post.
So, I hope you will be able to help me to find a good version of recovery and the good way to flash it !
I thank you in advance !

dmseg 1/2
<6>[ 0.000000] Initializing cgroup subsys cpu
<5>[ 0.000000] Linux version 3.0.8+ ([email protected]) (gcc version 4.4.3 (GCC) ) #233 SMP PREEMPT Mon Sep 2 18:37:15 CST 2013
<4>[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d
<4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[ 0.000000] Machine: RK30board
<6>[ 0.000000] memory reserve: Memory(base:0x91800000 size:80M) reserved for <ion>
<6>[ 0.000000] memory reserve: Memory(base:0x90c00000 size:12M) reserved for <fb0 buf>
<6>[ 0.000000] memory reserve: Memory(base:0x90600000 size:6M) reserved for <camera_ipp_mem>
<6>[ 0.000000] memory reserve: Total reserved 98M
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
<6>[ 0.000000] bootconsole [earlycon0] enabled
<4>[ 0.000000] CPU SRAM: copied sram code from c0aa7000 to fef00100 – fef023d0
<4>[ 0.000000] CPU SRAM: copied sram data from c0aa92d0 to fef03000 – fef03920
<6>[ 0.000000] L310 cache controller enabled
<6>[ 0.000000] l2x0: 16 ways, CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001, Cache size: 524288 B
<4>[ 0.000000] DDR DEBUG: version 1.00 20130121
<4>[ 0.000000] DDR DEBUG: DDR3 Device
<4>[ 0.000000] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
<4>[ 0.000000] DDR DEBUG: init success!!! freq=300MHz
<4>[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
<4>[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
<4>[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
<4>[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
<4>[ 0.000000] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
<4>[ 0.000000] DDR DEBUG: DRV Pull-Up=0xb, DRV Pull-Dwn=0xb
<4>[ 0.000000] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
<4>[ 0.000000] rk30_iomux_init
<4>[ 0.000000] Boot mode: 6 flag: 0xc3524200
<7>[ 0.000000] On node 0 totalpages: 237056
<7>[ 0.000000] free_area_init_node: node 0, pgdat c0aa6340, node_mem_map c152d000
<7>[ 0.000000] Normal zone: 1744 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 196400 pages, LIFO batch:31
<7>[ 0.000000] HighMem zone: 304 pages used for memmap
<7>[ 0.000000] HighMem zone: 38608 pages, LIFO batch:7
<6>[ 0.000000] PERCPU: Embedded 7 pages/cpu @c1d35000 s7072 r8192 d13408 u32768
<7>[ 0.000000] pcpu-alloc: s7072 r8192 d13408 u32768 alloc=8*4096
<7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 235008
<5>[ 0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x00180000 mtdparts=rk29xxnand:[email protected](misc),[email protected](kernel),[email protected](boot),[email protected](recovery),[email protected](backup),[email protected](cache),[email protected](userdata),[email protected](kpanic),[email protected](system),[email protected](user) bootver=2013-06-20#1.34 firmware_ver=4.1.1
<6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.000000] Memory: 774MB 152MB = 926MB total
<5>[ 0.000000] Memory: 920020k/920020k available, 128556k reserved, 155648K highmem
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 – 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xfff00000 – 0xfffe0000 ( 896 kB)
<5>[ 0.000000] DMA : 0xffc00000 – 0xffe00000 ( 2 MB)
<5>[ 0.000000] vmalloc : 0xf7000000 – 0xfe800000 ( 120 MB)
<5>[ 0.000000] lowmem : 0xc0000000 – 0xf6800000 ( 872 MB)
<5>[ 0.000000] pkmap : 0xbfe00000 – 0xc0000000 ( 2 MB)
<5>[ 0.000000] modules : 0xbf000000 – 0xbfe00000 ( 14 MB)
<5>[ 0.000000] .init : 0xc0408000 – 0xc048d000 ( 532 kB)
<5>[ 0.000000] .text : 0xc048d000 – 0xc0a411cc (5841 kB)
<5>[ 0.000000] .data : 0xc0a42000 – 0xc0aa6e60 ( 404 kB)
<5>[ 0.000000] .bss : 0xc0aaa024 – 0xc152c388 (10761 kB)
<6>[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
<6>[ 0.000000] Preemptible hierarchical RCU implementation.
<6>[ 0.000000] NR_IRQS:416
<4>[ 0.000000] rk30_gpio_init: 176 gpio irqs in 6 banks
<6>[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
<6>[ 0.000000] Console: colour dummy device 80×30
<6>[ 0.004965] Calibrating delay loop (skipped) preset value.. 1631.46 BogoMIPS (lpj=8157341)
<6>[ 0.013833] pid_max: default: 32768 minimum: 301
<6>[ 0.019037] Mount-cache hash table entries: 512
<6>[ 0.024581] Initializing cgroup subsys debug
<6>[ 0.029240] Initializing cgroup subsys cpuacct
<6>[ 0.034099] Initializing cgroup subsys freezer
<6>[ 0.038983] CPU: Testing write buffer coherency: ok
<4>[ 0.145025] CPU1: Booted secondary processor
<6>[ 0.145071] Brought up 2 CPUs
<6>[ 0.152997] SMP: Total of 2 processors activated (3262.93 BogoMIPS).
<6>[ 0.160214] devtmpfs: initialized
<6>[ 0.171372] NET: Registered protocol family 16
<4>[ 0.176259] last_log: 0xf0100000 0xc0aae210
<4>[ 0.182918] ————[ cut here ]————
<4>[ 0.187958] WARNING: at drivers/gpio/gpiolib.c:101 gpio_ensure_requested+0x48/0x114()
<4>[ 0.196340] autorequest GPIO-183
<4>[ 0.199929] [<c04981c4>] (unwind_backtrace+0x0/0xf0) from [<c04c0ae0>] (warn_slowpath_common+0x4c/0x64)
<4>[ 0.210067] [<c04c0ae0>] (warn_slowpath_common+0x4c/0x64) from [<c04c0b78>] (warn_slowpath_fmt+0x2c/0x3c)
<4>[ 0.220438] [<c04c0b78>] (warn_slowpath_fmt+0x2c/0x3c) from [<c061a4f0>] (gpio_ensure_requested+0x48/0x114)
<4>[ 0.230984] [<c061a4f0>] (gpio_ensure_requested+0x48/0x114) from [<c061aba0>] (gpio_direction_output+0x7c/0xfc)
<4>[ 0.241938] [<c061aba0>] (gpio_direction_output+0x7c/0xfc) from [<c040e444>] (machine_rk30_board_init+0x34/0x288)
<4>[ 0.252985] [<c040e444>] (machine_rk30_board_init+0x34/0x288) from [<c040a4d8>] (customize_machine+0x1c/0x28)
<4>[ 0.263713] [<c040a4d8>] (customize_machine+0x1c/0x28) from [<c048d5d8>] (do_one_initcall+0x94/0x164)
<4>[ 0.273604] [<c048d5d8>] (do_one_initcall+0x94/0x164) from [<c0408350>] (kernel_init+0x88/0x130)
<4>[ 0.283027] [<c0408350>] (kernel_init+0x88/0x130) from [<c0493678>] (kernel_thread_exit+0x0/0x8)
<4>[ 0.292464] —[ end trace 1b75b31a2719ed1c ]—
<6>[ 0.398156] rk29sdk_wifi_bt_gpio_control_init: init finished
<6>[ 0.408723] console [ttyFIQ0] enabled, bootconsole disabled
<6>[ 0.414889] Registered FIQ tty driver f008fc00
<6>[ 0.426987] bio: create slab <bio-0> at 0
<4>[ 0.431222] wm831x_dcdc_init
<4>[ 0.431404] wm831x_ldo_init
<5>[ 0.431758] SCSI subsystem initialized
<6>[ 0.431971] usbcore: registered new interface driver usbfs
<6>[ 0.432043] usbcore: registered new interface driver hub
<6>[ 0.434252] usbcore: registered new device driver usb
<6>[ 0.434711] rk30_i2c rk30_i2c.0: i2c-0: RK30 I2C adapter
<6>[ 0.434938] rk30_i2c rk30_i2c.1: i2c-1: RK30 I2C adapter
<6>[ 0.435151] rk30_i2c rk30_i2c.2: i2c-2: RK30 I2C adapter
<6>[ 0.435260] rk30_i2c rk30_i2c.3: i2c-3: RK30 I2C adapter
<6>[ 0.435379] rk30_i2c rk30_i2c.4: i2c-4: RK30 I2C adapter
<6>[ 0.483138] rk30-adc rk30-adc: rk30 adc: driver initialized
<4>[ 0.483433] timed_gpio_probe
<6>[ 0.483524] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[ 0.483920] Bluetooth: Core ver 2.16
<6>[ 0.483970] NET: Registered protocol family 31
<6>[ 0.483982] Bluetooth: HCI device and connection manager initialized
<6>[ 0.483999] Bluetooth: HCI socket layer initialized
<6>[ 0.484011] Bluetooth: L2CAP socket layer initialized
<6>[ 0.484036] Bluetooth: SCO socket layer initialized
<4>[ 0.485072] rk fb probe ok!
<4>[ 0.485164] wm831x_i2c_init
<6>[ 0.532516] cfg80211: Calling CRDA to update world regulatory domain
<3>[ 0.884439] rk30_i2c rk30_i2c.1: Addr[0x34] wait event timeout, state: 0, is_busy: 1, error: 0, complete_what: 0x0, ipd: 0x0
<4>[ 0.904437] rk30_i2c rk30_i2c.1: I2C_CON: start bit is set
<3>[ 0.924437] wm831x 1-0034: Failed to read parent ID: -110
<4>[ 0.924461] wm831x: probe of 1-0034 failed with error -110
<3>[ 1.324439] rk30_i2c rk30_i2c.1: Addr[0x2d] wait event timeout, state: 0, is_busy: 1, error: 0, complete_what: 0x2, ipd: 0x20
<3>[ 1.364436] tps65910 1-002d: tps65910_set_bits:read from reg 3f failed
<3>[ 1.764438] rk30_i2c rk30_i2c.1: Addr[0x2d] wait event timeout, state: 0, is_busy: 1, error: 0, complete_what: 0x2, ipd: 0x20
<3>[ 1.804436] tps65910 1-002d: read from reg 46 failed
<3>[ 1.804451] tps65910 1-002d: Error in configuring external control EN1
<4>[ 1.804465] tps65910 1-002d: Failed to initialise ext control config
<3>[ 2.204439] rk30_i2c rk30_i2c.1: Addr[0x2d] wait event timeout, state: 0, is_busy: 1, error: 0, complete_what: 0x2, ipd: 0x20
<3>[ 2.244436] tps65910 1-002d: tps65910_set_bits:read from reg 20 failed
<3>[ 2.244453] set_machine_constraints: VIO: failed to enable
<3>[ 2.244515] tps65910 1-002d: failed to register tps65910-pmic regulator
<4>[ 2.244536] tps65910-pmic: probe of tps65910-pmic failed with error -110
<4>[ 2.244680] tps65910_pre_init,line=38
<3>[ 2.644440] rk30_i2c rk30_i2c.1: Addr[0x2d] wait event timeout, state: 0, is_busy: 1, error: 0, complete_what: 0x2, ipd: 0x20
<3>[ 2.684437] tps65910 1-002d: Read from reg 0x40 failed
<3>[ 2.684451] Unable to read TPS65910_DEVCTRL2 reg
<3>[ 2.684463] tps65910 1-002d: pre_init() failed: -110
<4>[ 2.684601] tps65910: probe of 1-002d failed with error -110
<6>[ 2.684808] Switching to clocksource timer1
<4>[ 2.685016] lcdc0:reg_phy_base = 0x1010c000,reg_vir_base:0xf701c000
<4>[ 2.685049] fb0:win1
<4>[ 2.685052] fb1:win0
<4>[ 2.685056] fb2:win2
<6>[ 2.685065] Switched to NOHz mode on CPU #1
<4>[ 2.685153] lcdc0: dclk:33000000>>fps:59 rk30_load_screen for lcdc0 ok!
<6>[ 2.694437] Switched to NOHz mode on CPU #0
<4>[ 2.713630] fb0hy:90c00000>>vir:f8000000>>len:0xc00000
<4>[ 2.713896] rk_fb_register>>>>>fb0
<4>[ 2.714053] rk_fb_register>>>>>fb1
<4>[ 2.714227] rk_fb_register>>>>>fb2
<4>[ 2.714240] lcdc0 wakeup from stanby
<6>[ 2.714250] lcdc0 win1 open
<4>[ 2.731799] rk30 lcdc0 probe ok!
<4>[ 2.731858] lcdc1:reg_phy_base = 0x1010e000,reg_vir_base:0xf7028000
<4>[ 2.731891] fb0:win1
<4>[ 2.731895] fb1:win0
<4>[ 2.731898] fb2:win2
<4>[ 2.731952] lcdc1: dclk:74250000>>fps:60 rk30_load_screen for lcdc1 ok!
<4>[ 2.731974] fb3hy:90c00000>>vir:f8000000>>len:0xc00000
<4>[ 2.732253] rk_fb_register>>>>>fb3
<4>[ 2.732420] rk_fb_register>>>>>fb4
<4>[ 2.732568] rk_fb_register>>>>>fb5
<4>[ 2.732579] rk30 lcdc1 probe ok!
<4>[ 2.732637] ————————————————-boot with some other pmu,this is important notify————————————————-pwm_regulator_probe:n_voltages=17
<4>[ 2.732844] pwm_regulator.0: driver initialized
<4>[ 2.732856] rk30 pwm regulator is ok with pmu tps65910
<4>[ 2.742902] pwm_regulator_probe set vdd_core=1100000mV end
<4>[ 2.870731] regbase f7080000 0x0, otg_phy_confed08184, 0x550
<6>[ 2.920980] rk30_adc_battery: driver initialized
<6>[ 2.921245] NET: Registered protocol family 2
<6>[ 2.921372] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 2.921722] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>[ 2.923559] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
<6>[ 2.924621] TCP: Hash tables configured (established 131072 bind 65536)
<6>[ 2.924635] TCP reno registered
<6>[ 2.924648] UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 2.924687] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 2.925056] NET: Registered protocol family 1
<4>[ 2.925231] RK29 Backlight Driver Initialized.
<6>[ 2.925425] Unpacking initramfs…
<6>[ 3.000775] Freeing initrd memory: 1536K
<6>[ 3.000973] rk30-tsadc rk30-tsadc: initialized
<6>[ 3.001830] Loaded driver for PL330 DMAC-1 rk29-pl330
<6>[ 3.001847] DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
<6>[ 3.002002] Loaded driver for PL330 DMAC-2 rk29-pl330
<6>[ 3.002017] DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14
<4>[ 3.009188] highmem bounce pool size: 64 pages
<6>[ 3.009376] ashmem: initialized
<6>[ 3.014384] fuse init (API version 7.16)
<6>[ 3.015969] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>[ 3.015988] io scheduler noop registered
<6>[ 3.015998] io scheduler deadline registered
<6>[ 3.016056] io scheduler cfq registered (default)
<6>[ 3.022108] rga: Driver loaded succesfully
<4>[ 3.022746] rk_serial.c v1.3 2012-12-14
<6>[ 3.022838] rk_serial.0: ttyS0 at MMIO 0x10124000 (irq = 66) is a rk29_serial.0
<6>[ 3.044916] rk_serial rk_serial.0: membase 0xf704c000
<6>[ 3.044980] rk_serial.3: ttyS3 at MMIO 0x20068000 (irq = 69) is a rk29_serial.3
<6>[ 3.084869] rk_serial rk_serial.3: membase 0xf7050000
<6>[ 3.085144] Rockchip ion module(version: 1.0) is successfully loaded
<6>[ 3.087680] loop: module loaded
<6>[ 3.087788] Android kernel panic handler initialized (bind=kpanic)
<6>[ 3.088503] PPP generic driver version 2.4.2
<6>[ 3.088688] PPP Deflate Compression module registered
<6>[ 3.088701] PPP BSD Compression module registered
<6>[ 3.089295] PPP MPPE Compression module registered
<6>[ 3.089311] NET: Registered protocol family 24
<6>[ 3.089390] usbcore: registered new interface driver asix
<6>[ 3.089440] usbcore: registered new interface driver cdc_ether
<6>[ 3.089486] usbcore: registered new interface driver dm9620
<6>[ 3.089532] usbcore: registered new interface driver SR9700_android
<6>[ 3.089577] usbcore: registered new interface driver net1080
<6>[ 3.089621] usbcore: registered new interface driver cdc_subset
<6>[ 3.089674] usbcore: registered new interface driver zaurus
<6>[ 3.089697] cdc_ncm: 04-Aug-2011
<6>[ 3.089741] usbcore: registered new interface driver cdc_ncm
<4>[ 3.089753] Rockchip WiFi SYS interface (V1.00) …
<6>[ 3.089797] Initializing USB Mass Storage driver…
<6>[ 3.089858] usbcore: registered new interface driver usb-storage
<6>[ 3.089870] USB Mass Storage support registered.
<6>[ 3.089988] usbcore: registered new interface driver usbserial
<6>[ 3.090033] USB Serial support registered for generic
<6>[ 3.090086] usbcore: registered new interface driver usbserial_generic
<6>[ 3.090099] usbserial: USB Serial Driver core
<6>[ 3.090139] USB Serial support registered for GSM modem (1-port)
<6>[ 3.090193] usbcore: registered new interface driver option
<6>[ 3.090205] option: v0.7.2:USB Driver for GSM modems
<6>[ 3.300992] DWC_OTG: ^^^^^^^^^^^^^^^^^Device Mode
<6>[ 3.301017] usb20_otg usb20_otg: DWC OTG Controller
<6>[ 3.301042] usb20_otg usb20_otg: new USB bus registered, assigned bus number 1
<6>[ 3.301072] usb20_otg usb20_otg: irq 48, io mem 0x00000000
<6>[ 3.301081] DWC_OTG: dwc_otg_hcd_start controller in device mode,everest
<6>[ 3.301128] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 3.301141] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 3.301151] usb usb1: Product: DWC OTG Controller
<6>[ 3.301159] usb usb1: Manufacturer: Linux 3.0.8+ dwc_otg_hcd
<6>[ 3.301167] usb usb1: SerialNumber: usb20_otg
<6>[ 3.301501] hub 1-0:1.0: USB hub found
<6>[ 3.301516] hub 1-0:1.0: 1 port detected
<6>[ 3.302100] DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:0xf7180000
<6>[ 3.512773] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
<6>[ 3.512796] usb20_host usb20_host: DWC OTG Controller
<6>[ 3.512818] usb20_host usb20_host: new USB bus registered, assigned bus number 2
<6>[ 3.512845] usb20_host usb20_host: irq 49, io mem 0x00000000
<6>[ 3.512887] DWC_OTG: Init: Port Power? op_state=1
<6>[ 3.512895] DWC_OTG: Init: Power Port (0)
<6>[ 3.512933] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 3.512945] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 3.512955] usb usb2: Product: DWC OTG Controller
<6>[ 3.512963] usb usb2: Manufacturer: Linux 3.0.8+ host20_hcd
<6>[ 3.512971] usb usb2: SerialNumber: usb20_host
<6>[ 3.513248] hub 2-0:1.0: USB hub found
<6>[ 3.513263] hub 2-0:1.0: 1 port detected
<6>[ 3.514441] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[ 3.514453] android_usb gadget: Number of LUNs=2
<6>[ 3.514462] lun0: LUN: removable file: (no medium)
<6>[ 3.514471] lun1: LUN: removable file: (no medium)
<6>[ 3.514625] android_usb gadget: android_usb ready
<6>[ 3.514812] input: rk29-keypad as /devices/platform/rk29-keypad/input/input0
<4>[ 3.515006] ==gsl_ts_init==
<4>[ 3.515038] GSLX680 Enter gsl_ts_probe
<4>[ 3.515045] ==kzalloc success=
<4>[ 3.515051] [GSLX680] Enter gslX680_ts_init
<6>[ 3.515241] input: gslX680 as /devices/platform/rk30_i2c.2/i2c-2/2-0040/input/input1
<4>[ 3.605422] I read reg 0xf0 is 0
<4>[ 3.625190] I write reg 0xf0 0x12
<4>[ 3.645345] I read reg 0xf0 is 0x12
<3>[ 3.645687] i2c i2c-2: No ack, Maybe slave(addr: 0x40) not exist or abnormal power-on, retry 2…
<3>[ 3.646027] i2c i2c-2: No ack, Maybe slave(addr: 0x40) not exist or abnormal power-on, retry 1…
<3>[ 3.646366] i2c i2c-2: No ack, Maybe slave(addr: 0x40) not exist or abnormal power-on, retry 0…
<3>[ 3.745366] i2c i2c-2: No ack, Maybe slave(addr: 0x40) not exist or abnormal power-on, retry 2…
<3>[ 3.745875] i2c i2c-2: No ack, Maybe slave(addr: 0x40) not exist or abnormal power-on, retry 1…
<3>[ 3.746372] i2c i2c-2: No ack, Maybe slave(addr: 0x40) not exist or abnormal power-on, retry 0…

dmesg 2/2
<4>[ 3.814895] =============gsl_load_fw start==============
<6>[ 3.894947] usb 2-1: new high speed USB device number 2 using usb20_host
<6>[ 4.105961] usb 2-1: New USB device found, idVendor=0bda, idProduct=0179
<6>[ 4.106033] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[ 4.106081] usb 2-1: Product: 802.11n NIC
<6>[ 4.106116] usb 2-1: Manufacturer: Realtek
<6>[ 4.106150] usb 2-1: SerialNumber: 00AE0E0372CD
<4>[ 4.489292] =============gsl_load_fw end==============
<3>[ 4.535378] i2c i2c-2: No ack, Maybe slave(addr: 0x40) not exist or abnormal power-on, retry 2…
<3>[ 4.535938] i2c i2c-2: No ack, Maybe slave(addr: 0x40) not exist or abnormal power-on, retry 1…
<3>[ 4.536452] i2c i2c-2: No ack, Maybe slave(addr: 0x40) not exist or abnormal power-on, retry 0…
<4>[ 4.695988] [GSLX680] End gsl_ts_probe
<4>[ 4.696156] ret=0
<4>[ 4.696796] sensor_register_slave:mxc6225,id=16
<4>[ 4.696838] sensor_register_slave:akm8975,id=18
<4>[ 4.697136] sensor_register_slave:l3g4200d,id=31
<4>[ 4.697175] sensor_register_slave:cm3217,id=34
<4>[ 4.697205] light_cm3217_init
<6>[ 4.698522] lirc_dev: IR Remote Control driver registered, major 250
<6>[ 4.698568] IR NEC protocol handler initialized
<6>[ 4.698600] IR RC5(x) protocol handler initialized
<6>[ 4.698632] IR RC6 protocol handler initialized
<6>[ 4.698662] IR JVC protocol handler initialized
<6>[ 4.698693] IR Sony protocol handler initialized
<6>[ 4.698724] IR RC5 (streamzap) protocol handler initialized
<6>[ 4.698758] IR LIRC bridge handler initialized
<6>[ 4.698787] Linux video capture interface: v2.00
<4>[ 4.699398] start_charge_logo_display
<6>[ 4.700715] device-mapper: uevent: version 1.0.3
<6>[ 4.701579] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
<6>[ 4.702357] Bluetooth: HCI UART driver ver 2.2
<6>[ 4.702401] Bluetooth: HCI H4 protocol initialized
<6>[ 4.702436] Bluetooth: HCILL protocol initialized
<6>[ 4.702976] cpuidle: using governor ladder
<6>[ 4.703016] cpuidle: using governor menu
<6>[ 4.709081]
<6>[ 4.709092] drivers/mmc/core/core.c…1827.. ===== mmc_rescan Begin….[mmc0]
<6>[ 4.714321] rk29_sdmmc_change_clk_div..1928.. newDiv=83, newCLK=298Khz [sd_mmc]
<6>[ 4.714545] .Line3891..The End of SDMMC-probe Ver.5.00 The last modify date is 2012-11-05. [sd_mmc]
<6>[ 4.715141] .Line3891..The End of SDMMC-probe Ver.5.00 The last modify date is 2012-11-05. [sdio]
<7>[ 4.715296] Registered led device: button-backlight
<6>[ 4.717070] usbcore: registered new interface driver usbhid
<6>[ 4.717084] usbhid: USB HID core driver
<6>[ 4.717456] logger: created 256K log ‘log_main’
<6>[ 4.717551] logger: created 256K log ‘log_events’
<6>[ 4.717660] logger: created 256K log ‘log_radio’
<6>[ 4.717755] logger: created 256K log ‘log_system’
<4>[ 4.718339] i2c-core: driver [ES8323] using legacy suspend method
<4>[ 4.718354] i2c-core: driver [ES8323] using legacy resume method
<6>[ 4.718541] ES8323 audio_card_init
<6>[ 4.718553] XXXXEnter::audio_card_init—-201
<4>[ 4.718789] es8323_probe
<6>[ 4.751094]
<6>[ 4.751098] mmc_attach_sd..1218.. ===== Begin to identify card as SD-card. [mmc0]
<3>[ 4.757661] ES8323 0-0010: Failed to add route Left DAC->Left Mixer
<3>[ 4.757708] ES8323 0-0010: ES8323.0-0010: Failed to add 3D Mode: -16
<3>[ 4.757805] ES8323 0-0010: Failed to add route Left DAC->Left Mixer
<6>[ 4.757821] Enter::rk29_es8323_init—-138
<6>[ 4.757833] Enter::es8323_set_dai_sysclk—-668
<3>[ 4.767002] ES8323 0-0010: asoc: failed to add kcontrol Left Line Mux
<3>[ 4.767030] ES8323 0-0010: asoc: failed to add kcontrol Right PGA Mux
<3>[ 4.767056] ES8323 0-0010: asoc: failed to add kcontrol Left PGA Mux
<3>[ 4.767079] ES8323 0-0010: asoc: failed to add kcontrol Right ADC Mux
<3>[ 4.767102] ES8323 0-0010: asoc: failed to add kcontrol Left ADC Mux
<3>[ 4.767126] ES8323 0-0010: asoc: failed to add kcontrol Differential Mux
<4>[ 4.767178] ES8323 0-0010: ASoC: Failed to create POST debugfs file
<4>[ 4.767197] ES8323 0-0010: ASoC: Failed to create PRE debugfs file
<4>[ 4.767214] ES8323 0-0010: ASoC: Failed to create RINPUT2 debugfs file
<4>[ 4.767229] ES8323 0-0010: ASoC: Failed to create RINPUT1 debugfs file
<4>[ 4.767245] ES8323 0-0010: ASoC: Failed to create LINPUT2 debugfs file
<4>[ 4.767261] ES8323 0-0010: ASoC: Failed to create LINPUT1 debugfs file
<4>[ 4.767276] ES8323 0-0010: ASoC: Failed to create VREF debugfs file
<4>[ 4.767292] ES8323 0-0010: ASoC: Failed to create ROUT2 debugfs file
<4>[ 4.767307] ES8323 0-0010: ASoC: Failed to create LOUT2 debugfs file
<4>[ 4.767323] ES8323 0-0010: ASoC: Failed to create ROUT1 debugfs file
<4>[ 4.767338] ES8323 0-0010: ASoC: Failed to create LOUT1 debugfs file
<4>[ 4.767354] ES8323 0-0010: ASoC: Failed to create Left Out 1 debugfs file
<4>[ 4.767370] ES8323 0-0010: ASoC: Failed to create Right Out 1 debugfs file
<4>[ 4.767387] ES8323 0-0010: ASoC: Failed to create Left Out 2 debugfs file
<4>[ 4.767403] ES8323 0-0010: ASoC: Failed to create Right Out 2 debugfs file
<4>[ 4.767420] ES8323 0-0010: ASoC: Failed to create Right Mixer debugfs file
<4>[ 4.767437] ES8323 0-0010: ASoC: Failed to create Left Mixer debugfs file
<4>[ 4.767453] ES8323 0-0010: ASoC: Failed to create Left ADC debugfs file
<4>[ 4.767469] ES8323 0-0010: ASoC: Failed to create Right ADC debugfs file
<4>[ 4.767487] ES8323 0-0010: ASoC: Failed to create Right Line Mux debugfs file
<3>[ 4.767507] ES8323 0-0010: asoc: failed to add kcontrol Left Line Mux
<4>[ 4.767524] ES8323 0-0010: ASoC: Failed to create Left Line Mux debugfs file
<3>[ 4.767543] ES8323 0-0010: asoc: failed to add kcontrol Right PGA Mux
<4>[ 4.767560] ES8323 0-0010: ASoC: Failed to create Right PGA Mux debugfs file
<3>[ 4.767578] ES8323 0-0010: asoc: failed to add kcontrol Left PGA Mux
<4>[ 4.767595] ES8323 0-0010: ASoC: Failed to create Left PGA Mux debugfs file
<3>[ 4.767613] ES8323 0-0010: asoc: failed to add kcontrol Right ADC Mux
<4>[ 4.767629] ES8323 0-0010: ASoC: Failed to create Right ADC Mux debugfs file
<3>[ 4.767648] ES8323 0-0010: asoc: failed to add kcontrol Left ADC Mux
<4>[ 4.767664] ES8323 0-0010: ASoC: Failed to create Left ADC Mux debugfs file
<3>[ 4.767683] ES8323 0-0010: asoc: failed to add kcontrol Differential Mux
<4>[ 4.767700] ES8323 0-0010: ASoC: Failed to create Differential Mux debugfs file
<4>[ 4.767717] ES8323 0-0010: ASoC: Failed to create Mic Bias debugfs file
<6>[ 4.767829] Enter::es8323_set_bias_level—-929 level =1
<6>[ 4.769588] Enter::es8323_set_bias_level—-929 level =2
<6>[ 4.772469] Enter::es8323_set_bias_level—-929 level =3
<6>[ 4.772557] asoc: ES8323 HiFi <-> rk29_i2s.0 mapping ok
<6>[ 4.773027] ALSA device list:
<6>[ 4.773039] #0: RK29_ES8323
<6>[ 4.773144] GACT probability NOT on
<6>[ 4.773159] Mirror/redirect action on
<6>[ 4.773170] u32 classifier
<6>[ 4.773177] Actions configured
<6>[ 4.773188] Netfilter messages via NETLINK v0.30.
<6>[ 4.773244] nf_conntrack version 0.5.0 (14399 buckets, 57596 max)
<6>[ 4.773738] ctnetlink v0.93: registering with nfnetlink.
<6>[ 4.773784] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[ 4.773798] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 4.774051] xt_time: kernel timezone is -0000
<6>[ 4.774217] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 4.774402] arp_tables: (C) 2002 David S. Miller
<6>[ 4.774583] TCP cubic registered
<6>[ 4.775165] NET: Registered protocol family 10
<6>[ 4.775970] Mobile IPv6
<6>[ 4.776012] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 4.776160] IPv6 over IPv4 tunneling driver
<6>[ 4.777191] NET: Registered protocol family 17
<6>[ 4.777233] NET: Registered protocol family 15
<5>[ 4.777362] Bridge firewalling registered
<6>[ 4.779331] rk29_sdmmc_change_clk_div..1928.. newDiv=0, newCLK=49500Khz [sd_mmc]
<6>[ 4.779449] mmc0: new high speed SDHC card at address b368
<6>[ 4.779773] Bluetooth: RFCOMM TTY layer initialized
<6>[ 4.779795] Bluetooth: RFCOMM socket layer initialized
<6>[ 4.779807] Bluetooth: RFCOMM ver 1.11
<6>[ 4.779819] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 4.779831] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 4.779981] NET: Registered protocol family 35
<6>[ 4.780261] [BT_RFKILL]: Enter rfkill_rk_init
<6>[ 4.780369] [BT_RFKILL]: Request irq for bt wakeup host
<6>[ 4.780396] [BT_RFKILL]: ** disable irq
<6>[ 4.780591] mmcblk0: mmc0:b368 NCard 7.40 GiB
<6>[ 4.781886]
<6>[ 4.781890] msdos_partition..461… ==== Begin to parse sdcard-partition. [mmc0]
<6>[ 4.781908] msdos_partition..530… ==== The sdcard has MBR. [mmc0]
<6>[ 4.781923] msdos_partition..543… ==== partition-1, size=7760896KB [mmc0]
<6>[ 4.781938] msdos_partition..571… ==== main partition-1….[mmc0]
<6>[ 4.781951] mmcblk0: p1
<6>[ 4.782370] mmc_rescan_try_freq..1721.. ===== Initialize SD-card successfully. [mmc0]
<6>[ 4.782396]
<6>[ 4.782399] drivers/mmc/core/core.c…1827.. ===== mmc_rescan Begin….[mmc1]
<6>[ 4.806820] [BT_RFKILL]: bt shut off power
<6>[ 4.836600] [BT_RFKILL]: bt_default device registered.
<6>[ 4.836844] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
<6>[ 4.837495] i2c i2c-0: sensor_probe: ak8975,0xf00a7a00
<4>[ 4.837649] rk30-camera version: v0.2.28 Zoom by ipp
<3>[ 4.837799] i2c i2c-0: No ack, Maybe slave(addr: 0xd) not exist or abnormal power-on, retry 2…
<3>[ 4.838078] i2c i2c-0: No ack, Maybe slave(addr: 0xd) not exist or abnormal power-on, retry 1…
<3>[ 4.838349] i2c i2c-0: No ack, Maybe slave(addr: 0xd) not exist or abnormal power-on, retry 0…
<3>[ 4.838625] i2c i2c-0: No ack, Maybe slave(addr: 0xd) not exist or abnormal power-on, retry 2…
<3>[ 4.838897] i2c i2c-0: No ack, Maybe slave(addr: 0xd) not exist or abnormal power-on, retry 1…
<3>[ 4.839169] i2c i2c-0: No ack, Maybe slave(addr: 0xd) not exist or abnormal power-on, retry 0…
<3>[ 4.839441] i2c i2c-0: No ack, Maybe slave(addr: 0xd) not exist or abnormal power-on, retry 2…
<3>[ 4.839720] i2c i2c-0: No ack, Maybe slave(addr: 0xd) not exist or abnormal power-on, retry 1…
<4>[ 4.839907] get cif ldo failed!
<3>[ 4.840023] i2c i2c-0: No ack, Maybe slave(addr: 0xd) not exist or abnormal power-on, retry 0…
<4>[ 4.840042] sensor_chip_init:fail to read ak8975 devid:0xff
<3>[ 4.840057] i2c i2c-0: sensor_probe failed -11
<4>[ 4.840076] sensors: probe of 0-000d failed with error -11
<6>[ 4.840107] i2c i2c-0: sensor_probe: l3g4200d_gryo,0xf00a7c00
<3>[ 4.842697] i2c i2c-0: No ack, Maybe slave(addr: 0x69) not exist or abnormal power-on, retry 2…
<3>[ 4.842985] i2c i2c-0: No ack, Maybe slave(addr: 0x69) not exist or abnormal power-on, retry 1…
<3>[ 4.843264] i2c i2c-0: No ack, Maybe slave(addr: 0x69) not exist or abnormal power-on, retry 0…
<3>[ 4.843543] i2c i2c-0: No ack, Maybe slave(addr: 0x69) not exist or abnormal power-on, retry 2…
<3>[ 4.843818] i2c i2c-0: No ack, Maybe slave(addr: 0x69) not exist or abnormal power-on, retry 1…
<3>[ 4.844093] i2c i2c-0: No ack, Maybe slave(addr: 0x69) not exist or abnormal power-on, retry 0…
<3>[ 4.844369] i2c i2c-0: No ack, Maybe slave(addr: 0x69) not exist or abnormal power-on, retry 2…
<3>[ 4.844644] i2c i2c-0: No ack, Maybe slave(addr: 0x69) not exist or abnormal power-on, retry 1…
<3>[ 4.844916] i2c i2c-0: No ack, Maybe slave(addr: 0x69) not exist or abnormal power-on, retry 0…
<4>[ 4.844934] sensor_chip_init:fail to read l3g4200d_gryo devid:0xff
<3>[ 4.844949] i2c i2c-0: sensor_probe failed -11
<4>[ 4.844968] sensors: probe of 0-0069 failed with error -11
<6>[ 4.844997] i2c i2c-0: sensor_probe: gs_mxc6225,0xf00a7e00
<4>[ 4.845025] sensor_chip_init:gs_mxc6225:devid=0x0,ops=0xc0a8e1f0
<6>[ 4.846097] input: gsensor as /devices/platform/rk30_i2c.0/i2c-0/0-0015/input/input2
<4>[ 4.846242] sensor_irq_init:use polling,delay=30 ms
<4>[ 4.846386] sensor_misc_device_register:miscdevice: mma8452_daemon
<4>[ 4.846402] sensor_probe:initialized ok,sensor name:mxc6225,type:1,id=16
<4>[ 4.846408]
<6>[ 4.846444] i2c i2c-2: sensor_probe: light_cm3217,0xf01be600
<4>[ 4.846460] sensor_chip_init:light_cm3217:devid=0x0,ops=0xc0a8e430
<3>[ 4.846642] i2c i2c-2: No ack, Maybe slave(addr: 0x10) not exist or abnormal power-on, retry 2…
<3>[ 4.846816] i2c i2c-2: No ack, Maybe slave(addr: 0x10) not exist or abnormal power-on, retry 1…
<3>[ 4.846984] i2c i2c-2: No ack, Maybe slave(addr: 0x10) not exist or abnormal power-on, retry 0…
<3>[ 4.847152] i2c i2c-2: No ack, Maybe slave(addr: 0x10) not exist or abnormal power-on, retry 2…
<3>[ 4.847318] i2c i2c-2: No ack, Maybe slave(addr: 0x10) not exist or abnormal power-on, retry 1…
<3>[ 4.847483] i2c i2c-2: No ack, Maybe slave(addr: 0x10) not exist or abnormal power-on, retry 0…
<4>[ 4.847499] sensor_active:fail to active sensor
<4>[ 4.847510] sensor_init:line=97,error
<4>[ 4.847519] sensor_initial:fail to init sensor
<4>[ 4.847529] sensor_chip_init:fail to init sensor
<3>[ 4.847541] i2c i2c-2: sensor_probe failed -11
<4>[ 4.847558] sensors: probe of 2-0010 failed with error -11
<6>[ 4.847610] sensor_init: Probe name sensors
<3>[ 4.847624] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
<6>[ 4.847897] Freeing init memory: 532K
<3>[ 4.862918] init: /init.rk30board.rc: 91: invalid command ‘mknod’
<3>[ 4.863016] init: /init.rk30board.rc: 126: invalid service name ‘mt6620_supplicant’
<4>[ 4.863861] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<6>[ 4.928007] keychord: using input dev rk29-keypad for fevent
<3>[ 4.928234] init: cannot open ‘/initlogo.rle’
<4>[ 4.947233] get cif ldo failed!
<4>[ 4.947248] Probe gc2035_back success
<4>[ 4.947375] get cif ldo failed!
<4>[ 5.020185] gp_rknand_info = : 0xf02b1000
<4>[ 5.020277] rk30_chip_set:0
<4>[ 5.020359] request IRQ_NANDC irq , ret=0………
<4>[ 5.020387] FTL INFO:Version = 438,Date = 20130620
<4>[ 5.020459] FlashCopyProgBuf1=0xc13d0000
<4>[ 5.020489] ATime: 40 ns AHB: 148 timming: 1081
<4>[ 5.020507] No.1 FLASH INFO:2c 44 44 4b a9
<4>[ 5.020872] ATime: 32 ns AHB: 148 timming: 1061
<4>[ 5.021053] ATime: 32 ns AHB: 148 timming: 1061
<4>[ 5.021066] randomizer = 2 , EccBits = 28 pSpec->pReadRetrial = bf009708
<4>[ 5.054950] get cif ldo failed!
<4>[ 5.054963] Probe gc0308_front success
<4>[ 5.082747] totalLogicBlkRaw = 1897
<4>[ 5.082770] gBootMedia = 1 gSdmmcFwPartOffset =0!
<4>[ 5.082782] rknand_buffer.c version: 4.38 20121130!
<5>[ 5.087176] 10 cmdlinepart partitions found on MTD device rk29xxnand
<5>[ 5.087193] Creating 10 MTD partitions on “rk29xxnand”:
<5>[ 5.087210] 0x000000400000-0x000000800000 : “misc”
<5>[ 5.088284] 0x000000800000-0x000001000000 : “kernel”
<5>[ 5.089072] 0x000001000000-0x000002000000 : “boot”
<5>[ 5.089752] 0x000002000000-0x000004000000 : “recovery”
<5>[ 5.090466] 0x000004000000-0x000008000000 : “backup”
<5>[ 5.091215] 0x000008000000-0x000010000000 : “cache”
<5>[ 5.092032] 0x000010000000-0x000050000000 : “userdata”
<5>[ 5.093836] 0x000050000000-0x000050400000 : “kpanic”
<6>[ 5.095276] apanic: Bound to mtd partition ‘kpanic’
<6>[ 5.095290] apanic: No panic data available
<5>[ 5.095312] 0x000050400000-0x000082400000 : “system”
<5>[ 5.097001] 0x000082400000-0x0000ed200000 : “user”
<4>[ 5.099583] startBlk = 80 sysProtAddr = 79
<6>[ 5.196238] EXT4-fs (mtdblock8): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
<6>[ 5.438596] EXT4-fs (mtdblock6): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
<6>[ 5.582263] EXT4-fs (mtdblock5): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
<4>[ 5.588042] UMP: Using OS memory backend, allocation limit: 536870912
<4>[ 5.588064] UMP: UMP device driver loaded
<4>[ 5.623372] Mali: init_mali_clock mali_clock c0a5f900
<4>[ 5.638950] Mali: [MENTION=5839521 [MENTION=1065870 [user=1879310]@@@@[/user][/MENTION][/MENTION]@Mali device driver loaded success [MENTION=5839521 [MENTION=1065870 [user=1879310]@@@@[/user][/MENTION][/MENTION]@
<4>[ 5.639758] rk29_ipp: module is from the staging directory, the quality is unknown, you have been warned.
<4>[ 5.643932] ipp irq 47
<4>[ 5.644762] IPP init, version rk30-ipp 1.003
<4>[ 5.670171] mirroring: Unknown symbol video_data_to_mirroring (err 0)
<4>[ 5.670233] mirroring: Unknown symbol audio_data_to_mirroring (err 0)
<3>[ 5.892652] init: skipping insecure file ‘/data/local.prop’
<3>[ 6.040235] init: cannot find ‘/system/vendor/bin/pvrsrvctl’, disabling ‘pvrsrvctl’
<3>[ 6.051610] init: cannot find ‘/system/etc/install-recovery.sh’, disabling ‘flash_recovery’
<3>[ 6.062798] init: cannot find ‘/system/bin/hald’, disabling ‘hald’
<4>[ 6.102956] vpu: power on
<6>[ 6.105653] VPU_SERVICE: checking hw id 4831
<4>[ 6.110654] vpu: power off…done
<6>[ 6.114009] VPU_SERVICE: init success
<3>[ 6.154931] init: property ‘ro.serialno’ doesn’t exist while expanding ‘${ro.serialno}’
<3>[ 6.162994] init: cannot expand ‘${ro.serialno}’ while writing to ‘/sys/class/android_usb/android0/iSerial’
<3>[ 6.173234] init: using deprecated syntax for specifying property ‘ro.product.usbfactory’, use ${name} instead
<6>[ 6.215694] .409.. MMC0 receive the message sd-No-Media from VOLD.[sd_mmc]
<6>[ 6.215721] .440.. MMC0 receive the message No-Media from VOLD. waitTimes=0 [sd_mmc]
<6>[ 6.308052] .409.. MMC0 receive the message sd-Pending from VOLD.[sd_mmc]
<6>[ 6.310821] .409.. MMC0 receive the message sd-Idle-Unmounted from VOLD.[sd_mmc]
<4>[ 6.311330] [rknand_sys_storage_ioctl:90] rknand_sys_storage_ioctl in
<4>[ 6.311347] [rknand_sys_storage_ioctl:103] RKNAND_GET_DRM_KEY
<4>[ 6.311362] [rknand_sys_storage_ioctl:365] return ret = 0
<3>[ 6.311893] android_usb: already disabled
<6>[ 6.325727] adb_open
<3>[ 8.189655] gc2035 sensor_ioctl cmd(0x3) is unknown !
<3>[ 8.296864] gc0308 sensor_ioctl cmd(0x3) is unknown !
<4>[ 8.845225] rk fb use 3 buffers
<6>[ 19.304980] DWC_OTG: ********vbus detect*********************************************
<6>[ 19.508432] DWC_OTG: ********soft connect!!!*****************************************
<6>[ 19.514435] DWC_OTG: USB SUSPEND
<6>[ 19.610207] DWC_OTG: USB RESET
<6>[ 19.722420] android_work: sent uevent USB_STATE=CONNECTED
<6>[ 19.725849] DWC_OTG: USB RESET
<6>[ 19.770708] warning: `zygote’ uses 32-bit capabilities (legacy support in use)
<6>[ 19.789466] alarm_set_rtc: no RTC, time will be lost on reboot
<6>[ 19.851344] android_usb gadget: high speed config #1: android
<6>[ 19.851553] android_work: sent uevent USB_STATE=CONFIGURED
<4>[ 20.986377] rk30_adc_battery_poweron_capacity_check……..new_capacity=30,old_capacity=16
<4>[ 20.986404] rk30_adc_battery_poweron_capacity_check…bat ->bat_capacity=16,new_capacity=30,old_capacity=16
<4>[ 33.490421] =======================================================
<4>[ 33.496763] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
<4>[ 33.504244] =======================================================
<6>[ 33.510184] acc_open
<6>[ 33.510208] acc_release
<4>[ 33.510695] Realtek 8188EU USB WiFi driver (Powered by Rockchip,Ver 1.12) init.
<4>[ 33.522799] wifi_usb_init
<4>[ 33.525500] wifi_activate_usb
<6>[ 33.934438] usbcore: registered new interface driver rtl8188eu
<4>[ 34.846224] cfg80211_rtw_change_iface, old_iftype=6, new_iftype=2
<6>[ 34.847300] ADDRCONF(NETDEV_UP): wlan0: link is not ready
<4>[ 36.294939] bssid=ce:06:13:cb:eb:14
<4>[ 36.294959] matched by bssid
<4>[ 36.295436] rtw_cfg80211_set_wpa_version, wpa_version=1
<4>[ 36.295454] got wpa_ie
<6>[ 36.393509] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
<6>[ 40.970833] .409.. MMC0 receive the message sd-Checking from VOLD.[sd_mmc]
<6>[ 40.989720] .409.. MMC0 receive the message sd-Mounted from VOLD.[sd_mmc]
<3>[ 41.028905] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
<6>[ 44.473253] alarm_set_rtc: no RTC, time will be lost on reboot
<3>[ 73.296942] init: untracked pid 1495 exited
<6>[ 124.382944] Enter::es8323_pcm_startup—-805 es8323->sysclk=11289600
<6>[ 124.383046] Enter::rk29_hw_params—-47
<6>[ 124.383061] es8323_set_dai_fmt—-703, fmt[3000]
<6>[ 124.383071] es8323 in slave mode
<6>[ 124.384192] Enter:rk29_hw_params, 99, rate=44100
<6>[ 124.384211] Enter:rk29_hw_params, 107, LRCK=64
<4>[ 124.410163] fun:es8328_dapm_pre_event, event:1
<6>[ 124.410200] Enter::es8323_set_bias_level—-929 level =2
<4>[ 124.422000] fun:es8328_dapm_pre_event, event:1
<6>[ 124.422023] Enter::es8323_set_bias_level—-929 level =2
<4>[ 124.423929] fun:es8328_dapm_post_event, event:2
<4>[ 124.423946] fun:es8328_dapm_post_event, event:2
<6>[ 124.441070] Enter::es8323_set_bias_level—-929 level =3
<4>[ 124.446543] Enter::es8323_mute—-888–mute=0
<4>[ 128.263811] Enter::es8323_mute—-888–mute=1
<4>[ 133.315434] fun:es8328_dapm_pre_event, event:4
<4>[ 133.315455] fun:es8328_dapm_pre_event, event:4
<4>[ 133.315467] fun:es8328_dapm_post_event, event:8
<6>[ 133.315481] Enter::es8323_set_bias_level—-929 level =1
<4>[ 133.318559] fun:es8328_dapm_post_event, event:8
<6>[ 133.318574] Enter::es8323_set_bias_level—-929 level =1
<3>[ 182.858393] init: untracked pid 1485 exited
<3>[ 187.694941] init: untracked pid 1854 exited
<3>[ 193.742567] init: untracked pid 1427 exited
<6>[ 234.724866] input input0: adkey[vol+]: report ev[115] state[1]
<6>[ 234.814872] input input0: adkey[vol+]: report ev[115] state[0]

rkflashkit log
the RKFlashKit log:
============= 2014-11-09 10:00:14 ============
Loading partition information
MACHINE_MODEL:rk30sdk MACHINE_ID:007 MANUFACTURER:RK30SDK MAGIC: 0x5041524B ATAG: 0x60000800 MACHINE: 3066 CHECK_MASK: 0x80 KERNEL_IMG: 0x60408000 #RECOVER_KEY: 1,1,0,20,0 CMDLINE: console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x00800000 mtdparts=rk29xxnand:[email protected](misc),[email protected](kernel),[email protected](boot),[email protected](recovery),[email protected](backup),[email protected](cache),[email protected](userdata),[email protected](kpanic),[email protected](system),[email protected](user)
============= 2014-11-09 10:03:01 ============
Writing file /media/samuel/1A86-DFE7/recovery de test/recovery.img to partition [email protected]
writing flash memory at offset 0x00010000
writing flash memory at offset 0x00011000
writing flash memory at offset 0x00012000
writing flash memory at offset 0x00013000
writing flash memory at offset 0x00014000
Done!
Comparing partition [email protected] with file /media/samuel/1A86-DFE7/recovery de test/recovery.img
reading flash memory at offset 0x00010000
reading flash memory at offset 0x00011000
reading flash memory at offset 0x00012000
reading flash memory at offset 0x00013000
reading flash memory at offset 0x00014000
Done!
************ :
pffffff !!!
don’t work again ;-( pipo smart S1 cwm unpacked and repacked with mkbootimg (my recovery.img-kernel.gz + recovery.img-ramdisk.cpio.gz) ….
realy lost

ok ….
progress ... progress
so my tab is an ” KidsPad 3 “
this cwm work like it is : http://www.filefactory.com/file/605l7c1mh11n/n/Pipo_S1_CWM_by_Danyrolux_rar
but no way to do a nandroid backup “it look like don’t find the good partition”.
if I want to repack it with my original recovery.img, I have to keep the original kernel (from original recovery.img) and the ramdisk from this cwm ..? right ?

the original recovery.img unpack :
[email protected]:/media/samuel/1A86-DFE7/mytools$ sudo perl unpack-bootimg.pl recovery.img
[sudo] password for samuel:
kernel written to recovery.img-kernel.gz
ramdisk written to recovery.img-ramdisk.cpio.gz
cpio: ../init: impossible de créer un lien symbolique vers “sbin/ueventd”: Opération non permise
gzip: ../recovery.img-ramdisk.cpio.gz: decompression OK, trailing garbage ignored
29922 blocs
extracted ramdisk contents to directory recovery.img-ramdisk/
[email protected]:/media/samuel/1A86-DFE7/mytools$
the cwm pipo smart s1 recovery.img unpack :
[email protected]:/media/samuel/1A86-DFE7/mytools# perl unpack-bootimg.pl recovery.img
kernel written to recovery.img-kernel.gz
ramdisk written to recovery.img-ramdisk.cpio.gz
5942 blocs
extracted ramdisk contents to directory recovery.img-ramdisk/
[email protected]:/media/samuel/1A86-DFE7/mytools#
the repack :
[email protected]:~/Bureau/mytools# perl repack-bootimg.pl recovery.img-kernel.gz recovery.img-ramdisk/ reovery.img
5942 blocs
repacked boot image written at recovery.img-ramdisk/-repack.img
[email protected]:~/Bureau/mytools#
*************************
after reboot in recovery mode … the recovery is stil the original recovery ??? I don’t understand.
repacked the original recovery + the cwm ramdisk .

Have you checked with these guys: http://androtab.info/clockworkmod/rockchip/rk3066/
or here: http://forum.xda-developers.com/showthread.php?t=2102679 ?
They work for rokchip cwm too.

helo, thank you for your answer !
yes I read these post and tried the generic CWM (RK3066).
But it don't work with my device.
moreover I don't want pollute there topic with two page of my dmesg :
I would like to build it myself to understand the good way ..
not only ask "can you do it for me ? my device is ...).
Have you any idea about what I doind rong ?
I can provide the boot.img and recovery.img
http://ovh.to/jgiYdg
@+

samco08 said:
helo, thank you for your answer !
yes I read these post and tried the generic CWM (RK3066).
But it don't work with my device.
moreover I don't want pollute there topic with two page of my dmesg :
I would like to build it myself to understand the good way ..
not only ask "can you do it for me ? my device is ...).
Have you any idea about what I doind rong ?
I can provide the boot.img and recovery.img
http://ovh.to/jgiYdg
@+
Click to expand...
Click to collapse
That was the point. I asked you about those guys because they must have a proper device tree to build and you can use that as template to create one for your device. Then you can build any recovery you want. I'm not familiar with rockchip and I can't tell you much, but they probably can... if they want of course.
Besides that I played a little with your files and I repacked that working cwm with your kernel: http://d-h.st/VBK
I don't know if it works, but if it does use it.
Cheers!

carliv said:
That was the point. I asked you about those guys because they must have a proper device tree to build and you can use that as template to create one for your device. Then you can build any recovery you want. I'm not familiar with rockchip and I can't tell you much, but they probably can... if they want of course.
Besides that I played a little with your files and I repacked that working cwm with your kernel: http://d-h.st/VBK
I don't know if it works, but if it does use it.
Cheers!
Click to expand...
Click to collapse
Thank you very much !
but the problem is the same with your recovery
When I reboot, the recovery is the stock recovery ...
I tried with the PIPO Smart S1 cwm (480 x 800) and it work.... but I met an issue with partition ... no way to do a nandroid Backup !
any idea ?

samco08 said:
Thank you very much !
but the problem is the same with your recovery
When I reboot, the recovery is the stock recovery ...
I tried with the PIPO Smart S1 cwm (480 x 800) and it work.... but I met an issue with partition ... no way to do a nandroid Backup !
any idea ?
Click to expand...
Click to collapse
If after flashing recovery it stay unchanged, then the problem is the flashing process. Maybe there is a security or checksum check somewhere and if it doesn't meet requirements it doesn't actually flash the recovery...
I don't know what else to say.

carliv said:
If after flashing recovery it stay unchanged, then the problem is the flashing process. Maybe there is a security or checksum check somewhere and if it doesn't meet requirements it doesn't actually flash the recovery...
I don't know what else to say.
Click to expand...
Click to collapse
yes ...
the PIPO smart S1 CWM flash and start correctly but no way to do a nandroid backup.(partition problem)
Maybe I have to pick up a file in this recovery to repack it in my own recovery.
but witch ?
@+

nobody ?

Related

Lack of a Feature Complete Kernel for 32A Magic for AOSP Gingerbread [FIXED SOD?]

I don't have the skills to complete to solve this problem, but I thought I would put this together for any developers to look at.
Currently for 32A (Rogers) Magics, there isn't a custom kernel out there that I would consider 'perfected'.
1) SebastianFM/Carz12 2.6.32 kernel
* deep-sleep lock up bug, most obvious when airplane mode is turned on
2) Flykernel 2.6.29 kernel
* bluetooth pairs, but file transfer and other functionality fails
3) Old radio kernels (AOSP line)
I experience a high occurrence of random reboots going with new builds of old radio kernels. For some reason, the Magic can't be clocked as high as from HTC based kernels (1, 2).
There is another Hero kernel we could try porting which should share our radio stack:
http://forum.xda-developers.com/showthread.php?t=765701
But I am not confident in the quality of our compatible board files for the 2.6.3x kernel, since the Magic's last official HTC kernel shipped with the 2.6.29 board files that I ported into Flykernel.
Edit:
Sleep of death on carz kernel seems to be fixed!
http://forum.xda-developers.com/showpost.php?p=28687916&postcount=17
I also try to hero-kernel-2635, but touchscreen can't respond, adb ok, USB seem ok.
Those sensors are easy to fix. Just build the appropriate drivers for those. They might be missing from the sources.
Compare the .config
Which source were you able to boot from?
https://github.com/riemervdzee/hero-kernel-2.6.35
get sapphire and qdsp5_comp files from fly 2.6.29, and etc.
I try touchscreen driver from Ezterry biff testing kernel source, but still no response.
biff testing kernel , anaother .35 kernel,boot ok ,but more error……
We already have a 2.6.35 carz Kernel, which is quite good.
Cronnicery has also made his own kernel Cronmod, based on the lastest carz kernel.
So I think we don't need an extra Kernel, perhaps you can build a 3.0 kernel for ICS development.
ziyouwa said:
https://github.com/riemervdzee/hero-kernel-2.6.35
get sapphire and qdsp5_comp files from fly 2.6.29, and etc.
I try touchscreen driver from Ezterry biff testing kernel source, but still no response.
biff testing kernel , anaother .35 kernel,boot ok ,but more error……
Click to expand...
Click to collapse
I don't understand the code. Usually I slap things together and hope for them to work and fix all the compiler reported problems, so I expected the driver to plug and play nice together.
Sounds good that you got the 2.6.35 to boot though.
If we can get a feature complete kernel, we can move together with Hero devs for their ports, be it ICS or whatever, at least for new radio. We already have ROM cooks who do that, but our ROMs are turning out to have the bugs that I mentioned, which sucks
Does someone know if the stock Rogers kernel bluetooth works with AOSP Gingerbread ROMs? Maybe we should just work off that instead of the Hero kernels or the Cyangeonmod kernels.
carz kernel power manager has problem, Cronnicery kernel is 2.6.29, bluetooth is error.
2.6.35 or 2.6.29,very upset.
I get synaptics_i2c_rmi.c .h from ezterry kernel source,and edit board-sapphire.c as it, but... dmesg as below, Pls help me fix touchscreen. :
Code:
<6>[ 0.000000] Initializing cgroup subsys cpu
<5>[ 0.000000] Linux version 2.6.35.14-Las_Venturas-1.2 ([email protected]) (gcc version 4.4.3 (GCC) ) #24 PREEMPT Tue Jul 3 14:24:35 CST 2012
<4>[ 0.000000] CPU: ARMv6-compatible processor [4117b362] revision 2 (ARMv6TEJ), cr=00c5387f
<4>[ 0.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
<4>[ 0.000000] Machine: sapphire
<7>[ 0.000000] find the smi tag
<7>[ 0.000000] parse_tag_smi: smi size = 32
<7>[ 0.000000] find the hwid tag
<7>[ 0.000000] parse_tag_hwid: hwid = 0x1
<7>[ 0.000000] find the skuid tag
<7>[ 0.000000] parse_tag_skuid: hwid = 0x21401
<7>[ 0.000000] find the engineer tag
<7>[ 0.000000] parse_tag_engineerid: 0x2
<4>[ 0.000000] sapphire_fixup:bank size=0xc600000
<7>[ 0.000000] find the smi tag
<7>[ 0.000000] parse_tag_smi: smi size = 32
<7>[ 0.000000] find the hwid tag
<7>[ 0.000000] parse_tag_hwid: hwid = 0x1
<7>[ 0.000000] find the skuid tag
<7>[ 0.000000] parse_tag_skuid: hwid = 0x21401
<7>[ 0.000000] tag_panel_parsing: panel type = 0
<7>[ 0.000000] find the engineer tag
<7>[ 0.000000] parse_tag_engineerid: 0x2
<6>[ 0.000000] AKM Data size = 1018 , 0x89768976, size = 4064
<4>[ 0.000000] Ignoring unrecognised tag 0x41387898
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
<7>[ 0.000000] On node 0 totalpages: 53248
<7>[ 0.000000] free_area_init_node: node 0, pgdat c053ec90, node_mem_map c05f8000
<7>[ 0.000000] Normal zone: 464 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 52784 pages, LIFO batch:15
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 52784
<5>[ 0.000000] Kernel command line: board_sapphire.disable_uart3=0 board_sapphire.usb_h2w_sw=0 board_sapphire.disable_sdcard=0 smisize=32 androidboot.baseband=6.35.16.19 androidboot.cid=TIM__401 androidboot.carrier=TIM-Italy androidboot.mid=SAPP10000 androidboot.keycaps=qwerty androidboot.mode=normal androidboot.serialno=HT961KF11026 androidboot.bootloader=1.76.2007 no_console_suspend=1 console=null
<6>[ 0.000000] board_bootloader_setup: 1.76.2007
<6>[ 0.000000] board_bootloader_setup: default ENG BUILD
<6>[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>[ 0.000000] Memory: 198MB 10MB = 208MB total
<5>[ 0.000000] Memory: 204852k/204852k available, 8140k reserved, 0K highmem
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[ 0.000000] DMA : 0xffa00000 - 0xffe00000 ( 4 MB)
<5>[ 0.000000] vmalloc : 0xcf000000 - 0xf8000000 ( 656 MB)
<5>[ 0.000000] lowmem : 0xc0000000 - 0xce800000 ( 232 MB)
<5>[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
<5>[ 0.000000] .init : 0xc0008000 - 0xc0029000 ( 132 kB)
<5>[ 0.000000] .text : 0xc0029000 - 0xc0509000 (4992 kB)
<5>[ 0.000000] .data : 0xc050a000 - 0xc053f2a0 ( 213 kB)
<6>[ 0.000000] NR_IRQS:266
<7>[ 0.000000] sapphire_init_irq()
<6>[ 0.000000] Calibrating delay loop... 478.41 BogoMIPS (lpj=2392064)
<6>[ 0.250061] pid_max: default: 32768 minimum: 301
<4>[ 0.250518] Mount-cache hash table entries: 512
<6>[ 0.251281] Initializing cgroup subsys ns
<6>[ 0.251342] Initializing cgroup subsys cpuacct
<6>[ 0.251373] Initializing cgroup subsys freezer
<6>[ 0.251373] Initializing cgroup subsys net_cls
<6>[ 0.251403] Initializing cgroup subsys timer_slack
<6>[ 0.251464] CPU: Testing write buffer coherency: ok
<6>[ 0.255493] NET: Registered protocol family 16
<3>[ 0.255645] gpiochip_add: gpios 513..513 (generic) failed to register
<4>[ 0.255676] Trying to install chained interrupt handler for IRQ81
<4>[ 1.325592] is_sapphire_gpiov20=0
<4>[ 1.326385] sapphire_is_5M_camera=0
<6>[ 1.426361] acpu_clock_init()
<6>[ 1.427337] ACPU running at 480000 KHz
<6>[ 1.428100] ram_console: got buffer at 7a0000, size 20000
<6>[ 1.428466] ram_console: found existing buffer, size 47566, start 47566
<6>[ 1.783752] console [ram-1] enabled
<4>[ 1.787200] is_sapphire_gpiov20=0
<4>[ 1.787475] ------------[ cut here ]------------
<4>[ 1.787811] WARNING: at /work/android/kernel/sapphire-kernel-2.6.35.orig/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x54/0x10c()
<4>[ 1.788574] autorequest GPIO-1
<4>[ 1.789031] Modules linked in:
<4>[ 1.789550] Backtrace:
<4>[ 1.790161] [<c002d6f4>] (dump_backtrace+0x0/0x114) from [<c03f8e14>] (dump_stack+0x18/0x1c)
<4>[ 1.790649] r7:00000009 r6:00000067 r5:c01f8ad4 r4:ce217f18
<4>[ 1.791961] [<c03f8dfc>] (dump_stack+0x0/0x1c) from [<c00640f4>] (warn_slowpath_common+0x54/0x6c)
<4>[ 1.792480] [<c00640a0>] (warn_slowpath_common+0x0/0x6c) from [<c00641b0>] (warn_slowpath_fmt+0x38/0x40)
<4>[ 1.792968] r9:00000000 r8:00000000 r7:00000000 r6:00000001 r5:c051d64c
<4>[ 1.794464] r4:c056eb08
<4>[ 1.795257] [<c0064178>] (warn_slowpath_fmt+0x0/0x40) from [<c01f8ad4>] (gpio_ensure_requested+0x54/0x10c)
<4>[ 1.795745] r3:00000001 r2:c04bc314
<4>[ 1.796539] [<c01f8a80>] (gpio_ensure_requested+0x0/0x10c) from [<c01f8d40>] (gpio_direction_output+0x84/0x16c)
<4>[ 1.797058] r7:00000001 r6:60000013 r5:c056eb08 r4:c051d64c
<4>[ 1.798370] [<c01f8cbc>] (gpio_direction_output+0x0/0x16c) from [<c000e420>] (sapphire_init+0x17c/0x1c4)
<4>[ 1.798889] [<c000e2a4>] (sapphire_init+0x0/0x1c4) from [<c000a7a8>] (customize_machine+0x20/0x2c)
<4>[ 1.799407] r5:c0025400 r4:c000a788
<4>[ 1.800170] [<c000a788>] (customize_machine+0x0/0x2c) from [<c00293bc>] (do_one_initcall+0x64/0x1c0)
<4>[ 1.800689] [<c0029358>] (do_one_initcall+0x0/0x1c0) from [<c0008488>] (kernel_init+0xb4/0x170)
<4>[ 1.801208] r9:00000000 r8:00000000 r7:00000013 r6:c0067b24 r5:c0025400
<4>[ 1.802490] r4:c0024dfc
<4>[ 1.803527] [<c00083d4>] (kernel_init+0x0/0x170) from [<c0067b24>] (do_exit+0x0/0x6b4)
<4>[ 1.803802] r5:c00083d4 r4:00000000
<4>[ 1.804870] ---[ end trace 1b75b31a2719ed1c ]---
<4>[ 1.817687] bio: create slab <bio-0> at 0
<6>[ 1.819458] msm_i2c_probe
<6>[ 1.820312] msm_i2c_probe: clk_ctl 35d, 100000 Hz
<6>[ 1.823486] Bluetooth: Core ver 2.15
<6>[ 1.823883] NET: Registered protocol family 31
<6>[ 1.824401] Bluetooth: HCI device and connection manager initialized
<6>[ 1.824676] Bluetooth: HCI socket layer initialized
<6>[ 1.825714] Switching to clocksource gp_timer
<6>[ 1.828735] NET: Registered protocol family 2
<6>[ 1.829681] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 1.830963] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
<6>[ 1.832153] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
<6>[ 1.832733] TCP: Hash tables configured (established 8192 bind 8192)
<6>[ 1.833251] TCP reno registered
<6>[ 1.833557] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 1.834075] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 1.834777] NET: Registered protocol family 1
<6>[ 1.836425] RPC: Registered udp transport module.
<6>[ 1.836730] RPC: Registered tcp transport module.
<6>[ 1.837036] RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>[ 1.837799] Unpacking initramfs...
<6>[ 1.868408] Freeing initrd memory: 144K
<6>[ 1.869567] [SMD]smd_init()
<6>[ 1.869842] [SMD]smd_core_init()
<6>[ 1.870117] [SMD]phy addr of smd_info.state=0x1F023D8
<6>[ 1.870758] [SMD]smd_core_init() done
<3>[ 1.871032] msm_init_last_radio_log: could not retrieve SMEM_CLKREGIM_BSP
<3>[ 1.871643] _smem_log_init: no power log or log_idx allocated, smem_log disabled
<6>[ 1.872467] [SMD]smd_alloc_channel() cid=02 size=08192 'SMD_RPCCALL'
<6>[ 1.874084] [SMD]SMD: ch 2 0 -> 1
<6>[ 1.874420] [SMD]smd_alloc_channel() cid=11 size=08192 'SMD_DATA5'
<6>[ 1.875183] [SMD]smd_alloc_channel() cid=12 size=08192 'SMD_DATA6'
<6>[ 1.875640] [SMD]smd_alloc_channel() cid=13 size=08192 'SMD_DATA7'
<6>[ 1.876708] [SMD]smd_alloc_channel() cid=17 size=08192 'SMD_DATA11'
<6>[ 1.877288] [SMD]smd_alloc_channel() cid=38 size=08192 'SMD_DATA5_CNTL'
<6>[ 1.878021] [SMD]smd_alloc_channel() cid=39 size=08192 'SMD_DATA6_CNTL'
<6>[ 1.878479] [SMD]smd_alloc_channel() cid=40 size=08192 'SMD_DATA7_CNTL'
<6>[ 1.879028] [SMD]SMD: ch 2 1 -> 2
<6>[ 1.891967] Acquire 'boot-time' no_halt_lock 60s
<4>[ 1.893218] sapphire_init_panel:machine_is_sapphire=1, machine_arch_type=1729, MACH_TYPE_SAPPHIRE=1729
<7>[ 1.893798] get_smi_size=32
<6>[ 1.895324] [DISP]mdp_probe: initialized
<7>[ 1.896606] Registered led device: lcd-backlight
<3>[ 1.897613] sapphire_rfkill_probe: Could not request gpio: 0
<6>[ 1.904876] RPC_TIME_TOD_SET_APPS_BASES:
<6>[ 1.904876] tick = 438088
<6>[ 1.904907] stamp = 0
<6>[ 1.939300] [BATT] M2A_RPC: cable_update: USB at 863523192 (1970-01-01 00:00:00.863187736 UTC)
<6>[ 1.940124] [BATT] htc_cable_status_update: 0 -> 1
<6>[ 1.940399] [USB] msm_hsusb_set_vbus_state: 1
<6>[ 1.941558] [BATT] A2M_RPC: get_batt_info: batt_id=2, batt_vol=4049, batt_temp=350, batt_current=1, level=100, charging_source=1, charging_enabled=1, full_bat=1340000, over_vchg=0 at 866481312 (1970-01-01 00:00:00.865383453 UTC)
<6>[ 1.944183] H2W: Registering H2W (headset) driver
<6>[ 1.944702] [H2W] Full Speed USB Mode: 0
<6>[ 1.944976] [H2W] HTC Headset Support: 1
<6>[ 1.945251] [H2W] H2W Device Support: 1
<4>[ 1.947814] ------------[ cut here ]------------
<4>[ 1.948181] WARNING: at /work/android/kernel/sapphire-kernel-2.6.35.orig/drivers/gpio/gpiolib.c:103 gpio_ensure_requested+0x54/0x10c()
<4>[ 1.948944] autorequest GPIO-37
<4>[ 1.949218] Modules linked in:
<4>[ 1.949951] Backtrace:
<4>[ 1.950531] [<c002d6f4>] (dump_backtrace+0x0/0x114) from [<c03f8e14>] (dump_stack+0x18/0x1c)
<4>[ 1.951049] r7:00000009 r6:00000067 r5:c01f8ad4 r4:ce217df8
<4>[ 1.952362] [<c03f8dfc>] (dump_stack+0x0/0x1c) from [<c00640f4>] (warn_slowpath_common+0x54/0x6c)
<4>[ 1.952880] [<c00640a0>] (warn_slowpath_common+0x0/0x6c) from [<c00641b0>] (warn_slowpath_fmt+0x38/0x40)
<4>[ 1.953399] r9:00000000 r8:0000001b r7:00000000 r6:00000025 r5:c051d6e8
<4>[ 1.954681] r4:c056ec28
<4>[ 1.955688] [<c0064178>] (warn_slowpath_fmt+0x0/0x40) from [<c01f8ad4>] (gpio_ensure_requested+0x54/0x10c)
<4>[ 1.955963] r3:00000025 r2:c04bc314
<4>[ 1.956970] [<c01f8a80>] (gpio_ensure_requested+0x0/0x10c) from [<c01f8ea8>] (gpio_direction_input+0x80/0x164)
<4>[ 1.957458] r7:c056ec28 r6:00000015 r5:60000013 r4:c051d6e8
<4>[ 1.958770] [<c01f8e28>] (gpio_direction_input+0x0/0x164) from [<c00575c4>] (h2w_probe+0x5f0/0xc68)
<4>[ 1.959289] r9:00000000 r8:02faf080 r7:00000000 r6:ce278340 r5:c0546a94
<4>[ 1.960784] r4:00000000
<4>[ 1.961578] [<c0056fd4>] (h2w_probe+0x0/0xc68) from [<c022f248>] (platform_drv_probe+0x20/0x24)
<4>[ 1.962097] [<c022f228>] (platform_drv_probe+0x0/0x24) from [<c022e1f8>] (driver_probe_device+0xb0/0x160)
<4>[ 1.962402] [<c022e148>] (driver_probe_device+0x0/0x160) from [<c022e310>] (__driver_attach+0x68/0x8c)
<4>[ 1.962890] r7:00000000 r6:c051d564 r5:c0518fc0 r4:c0518f78
<4>[ 1.964416] [<c022e2a8>] (__driver_attach+0x0/0x8c) from [<c022d9a0>] (bus_for_each_dev+0x54/0x94)
<4>[ 1.964904] r7:00000000 r6:c022e2a8 r5:ce217ef8 r4:c051d564
<4>[ 1.966186] [<c022d94c>] (bus_for_each_dev+0x0/0x94) from [<c022e05c>] (driver_attach+0x20/0x28)
<4>[ 1.966705] r7:00000000 r6:c052eb88 r5:ce33cf00 r4:c051d564
<4>[ 1.968017] [<c022e03c>] (driver_attach+0x0/0x28) from [<c022d268>] (bus_add_driver+0xa8/0x22c)
<4>[ 1.968536] [<c022d1c0>] (bus_add_driver+0x0/0x22c) from [<c022e628>] (driver_register+0xb0/0x140)
<4>[ 1.969055] [<c022e578>] (driver_register+0x0/0x140) from [<c022f6b8>] (platform_driver_register+0x64/0x7c)
<4>[ 1.969543] r9:00000000 r8:00000000 r7:00000013 r6:00000001 r5:c0025400
<4>[ 1.970825] r4:c000f5cc
<4>[ 1.971862] [<c022f654>] (platform_driver_register+0x0/0x7c) from [<c000f5e0>] (h2w_init+0x14/0x1c)
<4>[ 1.972167] [<c000f5cc>] (h2w_init+0x0/0x1c) from [<c00293bc>] (do_one_initcall+0x64/0x1c0)
<4>[ 1.972686] [<c0029358>] (do_one_initcall+0x0/0x1c0) from [<c0008488>] (kernel_init+0xb4/0x170)
<4>[ 1.973175] r9:00000000 r8:00000000 r7:00000013 r6:c0067b24 r5:c0025400
<4>[ 1.974456] r4:c0024f48
<4>[ 1.975463] [<c00083d4>] (kernel_init+0x0/0x170) from [<c0067b24>] (do_exit+0x0/0x6b4)
<4>[ 1.975738] r5:c00083d4 r4:00000000
<4>[ 1.976715] ---[ end trace 1b75b31a2719ed1d ]---
<6>[ 1.977416] H2W route = H2W-GPIO, BT-UART1
<6>[ 1.978515] input: h2w headset as /devices/virtual/input/input0
<6>[ 1.979064] H2W: Registering H2W (headset) driver finish
<6>[ 1.993347] [SMD]smd_alloc_channel() cid=27 size=08192 'SMD_GPSNMEA'
<6>[ 1.995391] ashmem: initialized
<6>[ 1.998260] squashfs: version 4.0 (2009/01/31) Phillip Lougher
<6>[ 2.000213] fuse init (API version 7.14)
<4>[ 2.001129] yaffs Jul 3 2012 12:37:01 Installing.
<6>[ 2.010742] io scheduler noop registered
<6>[ 2.011047] io scheduler deadline registered (default)
<6>[ 2.011932] [DISP]mddi: init() base=0xcf014000 irq=16
<7>[ 2.012756] [DISP]mddi runs at 122880000
<6>[ 2.014343] [DISP]mddi cmd send rtd: int 3a000, stat 8063, rtd val d
<6>[ 2.017089] [DISP]mddi: registering panel mddi_c_d263_0000
<6>[ 2.017364] [DISP]mddi: publish:
<6>[ 2.018890] [DISP]vsync on gpio 97 now 0
<6>[ 2.088134] [DISP]msmfb_probe() installing 320 x 480 panel
<6>[ 2.092803] PRUE G
<6>[ 2.093414] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 45) is a MSM HS UART
<6>[ 2.094390] msm_serial_hs module loaded
<6>[ 2.095214] [BT]msm_serial_hs module loaded
<6>[ 2.096374] [BT]msm_serial_hs module loaded
<6>[ 2.097351] [BT]msm_serial_hs module loaded
<6>[ 2.103454] loop: module loaded
<6>[ 2.103912] pmem: 1 init
<6>[ 2.104919] pmem_adsp: 0 init
<6>[ 2.105987] pmem_camera: 0 init
<6>[ 2.107696] Android kernel panic handler initialized (bind=kpanic)
<6>[ 2.108856] msm_nand: allocated dma buffer at ffa47000, dma_addr 275e4000
<6>[ 2.109588] status: c03120
<6>[ 2.109863] nandid: 5501bcec maker ec device bc
<6>[ 2.110137] Found a supported NAND device
<6>[ 2.110626] NAND Id : 0xBCEC
<6>[ 2.110870] Buswidth : 16 Bits
<6>[ 2.111145] Density : 512 MByte
<6>[ 2.111633] Pagesize : 2048 Bytes
<6>[ 2.111907] Erasesize: 131072 Bytes
<6>[ 2.112152] Oobsize : 64 Bytes
<6>[ 2.112487] msm_nand: read CFG0 = aa5400c0, CFG1 = 8746a
<6>[ 2.113006] CFG0 Init : 0xe85408c0
<6>[ 2.113281] CFG1 Init : 0x0008746a
<6>[ 2.113769] CFG0: cw/page=3 ud_sz=516 ecc_sz=10 spare_sz=0 num_addr_cycles=5
<6>[ 2.114074] DEV_CMD1: f00f3000
<6>[ 2.114410] <6>NAND_EBI2_ECC_BUF_CFG: 1ff
<5>[ 2.114929] Creating 6 MTD partitions on "msm_nand":
<5>[ 2.115234] 0x0000024c0000-0x000002500000 : "misc"
<5>[ 2.117950] 0x0000026c0000-0x000002bc0000 : "recovery"
<5>[ 2.127807] 0x000002bc0000-0x000002e40000 : "boot"
<5>[ 2.133789] 0x000002e40000-0x00000d840000 : "system"
<6>[ 2.340850] [SMD]smd_alloc_channel() cid=00 size=08192 'SMD_DS'
<6>[ 2.343505] [SMD]smd_alloc_channel() cid=07 size=08192 'SMD_DATA1'
<6>[ 2.345733] [SMD]smd_alloc_channel() cid=08 size=08192 'SMD_DATA2'
<6>[ 2.347534] [SMD]smd_alloc_channel() cid=09 size=08192 'SMD_DATA3'
<6>[ 2.349365] [SMD]smd_alloc_channel() cid=10 size=08192 'SMD_DATA4'
<5>[ 2.399444] 0x00000d840000-0x000015a40000 : "cache"
<5>[ 2.560302] 0x000015a40000-0x000020000000 : "userdata"
<6>[ 2.770782] [USB] msm72k_probe
<6>[ 2.771118] [USB] accessory detect 0
<6>[ 2.771392] [USB] id_pin_gpio 0
<6>[ 2.771667] [USB] dock detect 0
<6>[ 2.772155] [USB] dock pin gpio 0
<6>[ 2.772583] [USB] msm72k_probe() io=cf01c000, irq=47, dma=ffa48000(27609000)
<6>[ 2.774536] android init
<6>[ 2.774993] android_probe pdata: c05197a4
<6>[ 2.775482] android_bind
<7>[ 2.775756] android_bind_config
<6>[ 2.776855] android_usb gadget: android_usb ready
<6>[ 2.777191] [USB] msm72k_udc: registered gadget driver 'android_usb'
<6>[ 2.777862] f_adb init
<6>[ 2.778137] android_register_function adb
<6>[ 2.778381] f_mass_storage init
<6>[ 2.778808] fsg_probe pdev: c05192f0, pdata: c0519784
<6>[ 2.779449] android_register_function usb_mass_storage
<6>[ 2.779724] f_rndis init
<6>[ 2.780426] android_register_function rndis
<6>[ 2.780700] rndis_function_bind_config MAC: 00:00:00:00:00:00
<4>[ 2.781127] android_usb gadget: using random self ethernet address
<4>[ 2.781646] android_usb gadget: using random host ethernet address
<6>[ 2.783172] usb0: MAC 9a:73:15:a7:b5:4a
<6>[ 2.783477] usb0: HOST MAC 82:34:b3:48:92:71
<6>[ 2.784606] [USB] hsusb: IDLE -> ONLINE
<6>[ 2.785125] [USB] lpm exit
<6>[ 2.786163] [USB] hsusb: reset controller
<6>[ 2.786621] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[ 2.787139] android_usb gadget: Number of LUNs=1
<6>[ 2.787445] lun0: LUN: removable file: (no medium)
<6>[ 2.788360] adb_bind_config
<4>[ 2.789978] is_sapphire_gpiov20=0
<3>[ 2.837127] msm_i2c msm_i2c.0: error, status 63c8 (20,E4,00)(20,F4,00)(cnt:1,pos:0)
<3>[ 2.837646] msm_i2c msm_i2c.0: Error during data xfer (-5) (20,E4,00)
<6>[ 2.947296] synaptics_ts_probe: Product Major Version 3
<6>[ 2.948516] synaptics_ts_probe: Product Minor Version 1
<6>[ 2.949462] synaptics_ts_probe: product property 2
<6>[ 2.950653] synaptics_ts_probe: device control 81
<6>[ 2.951599] synaptics_ts_probe: interrupt enable 3
<6>[ 2.953948] synaptics_ts_probe: 0xe0: 1 1 1 2 3 1 0 1
<6>[ 2.955322] synaptics_ts_probe: Sensor properties 601
<6>[ 2.959106] synaptics_ts_probe: max_x 3475, max_y 5328
<6>[ 2.959625] synaptics_ts_probe: inactive_x -40 -40, inactive_y -31 -31
<6>[ 2.960113] synaptics_ts_probe: snap_x 40-48 40-48, snap_y 79-87 79-87
<6>[ 2.960937] input: synaptics-rmi-touchscreen as /devices/virtual/input/input1
<6>[ 2.962310] synaptics_ts_probe: Start touchscreen synaptics-rmi-touchscreen in interrupt mode
<6>[ 2.963684] [KEY] GPIO Input Driver: Start gpio inputs for sapphire-nav in interrupt mode
<6>[ 2.964752] input: sapphire-nav as /devices/virtual/input/input2
<6>[ 2.965759] [KEY] gpio_keys_scan_keys: key 1-272, 0 (168) changed to 0
<6>[ 2.966461] [KEY] GPIO Input Driver: Start gpio inputs for sapphire-nav-button in interrupt mode
<6>[ 2.967651] input: sapphire-nav-button as /devices/virtual/input/input3
<6>[ 2.968811] [KEY] GPIO Matrix Keypad Driver: Start keypad matrix for sapphire-keypad in interrupt mode
<6>[ 2.969787] [KEY] GPIO_Input_ISR : 0, return IRQ_HANDLED;
<6>[ 2.970367] [KEY] GPIO Input Driver: Start gpio inputs for sapphire-keypad in interrupt mode
<6>[ 2.971496] input: sapphire-keypad as /devices/virtual/input/input4
<6>[ 2.972900] using input dev h2w headset for key reset
<6>[ 2.973449] using input dev sapphire-nav for key reset
<6>[ 2.973724] using input dev sapphire-keypad for key reset
<6>[ 2.975585] using rtc device, msm_rtc, for alarms
<6>[ 2.975891] rs30000048:00010001 rs30000048:00010001: rtc core: registered msm_rtc as rtc0
<6>[ 2.977294] AKM8976A compass driver: init
<6>[ 2.980377] input: compass as /devices/virtual/input/input5
<6>[ 2.981933] Linux video capture interface: v2.00
<4>[ 2.982543] is_sapphire_gpiov20=0
<6>[ 2.983184] [CAM]sctrl.node 0
<6>[ 3.074249] [USB] ulpi: write 0x40 to 0x31
<6>[ 3.074554] [USB] ulpi: write 0x01 to 0x0d
<6>[ 3.074829] [USB] ulpi: write 0x01 to 0x10
<6>[ 3.075347] [USB] handle_notify_offline: notify offline
<6>[ 3.075714] [USB] msm_hsusb: enable pullup
<6>[ 3.079345] [USB] suspend
<4>[ 3.143951] is_sapphire_gpiov20=0
<6>[ 3.145507] msm_v4l2: msm_v4l2_init
<6>[ 3.146636] device-mapper: uevent: version 1.0.3
<6>[ 3.147216] [USB] not AC charger
<6>[ 3.148498] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
<6>[ 3.149108] Bluetooth: HCI UART driver ver 2.2
<6>[ 3.149383] Bluetooth: HCI H4 protocol initialized
<6>[ 3.149841] Bluetooth: HCILL protocol initialized
<6>[ 3.152526] mmc0: Qualcomm MSM SDCC at 0x00000000a0400000 irq 24,0 dma 8
<6>[ 3.153015] mmc0: Platform slot type: N/A
<6>[ 3.153289] mmc0: 4 bit data mode enabled
<6>[ 3.153533] mmc0: 8 bit data mode disabled
<6>[ 3.154022] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
<6>[ 3.154296] mmc0: Slot eject status = 1
<6>[ 3.154754] mmc0: Power save feature enable = 1
<6>[ 3.155029] mmc0: DM non-cached buffer at ffa4a000, dma_addr 0x27656000
<6>[ 3.155517] mmc0: DM cmd busaddr 0x27656000, cmdptr busaddr 0x27656300
<6>[ 3.157104] mmc1: Qualcomm MSM SDCC at 0x00000000a0500000 irq 26,190 dma 8
<6>[ 3.157623] mmc1: Platform slot type: N/A
<6>[ 3.157867] mmc1: 4 bit data mode enabled
<6>[ 3.158142] mmc1: 8 bit data mode disabled
<6>[ 3.158599] mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 80000000 Hz
<6>[ 3.158874] mmc1: Slot eject status = 0
<6>[ 3.159362] mmc1: Power save feature enable = 1
<6>[ 3.159637] mmc1: DM non-cached buffer at ffa4b000, dma_addr 0x27657000
<6>[ 3.160095] mmc1: DM cmd busaddr 0x27657000, cmdptr busaddr 0x27657300
<7>[ 3.160980] Registered led device: button-backlight
<7>[ 3.161895] Registered led device: red
<7>[ 3.162322] Registered led device: green
<7>[ 3.162719] Registered led device: blue
<7>[ 3.163330] Registered led device: jogball-backlight
<6>[ 3.165313] logger: created 64K log 'log_main'
<6>[ 3.165832] logger: created 256K log 'log_events'
<6>[ 3.166351] logger: created 64K log 'log_radio'
<6>[ 3.167022] logger: created 64K log 'log_system'
<6>[ 3.167999] GACT probability NOT on
<6>[ 3.168304] Mirror/redirect action on
<6>[ 3.168548] u32 classifier
<6>[ 3.169036] Actions configured
<6>[ 3.169281] Netfilter messages via NETLINK v0.30.
<6>[ 3.169738] nf_conntrack version 0.5.0 (3203 buckets, 12812 max)
<4>[ 3.170684] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
<4>[ 3.170959] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
<4>[ 3.171447] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
<6>[ 3.172241] ctnetlink v0.93: registering with nfnetlink.
<6>[ 3.172637] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[ 3.173126] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 3.174133] xt_time: kernel timezone is -0000
<6>[ 3.175140] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 3.175720] arp_tables: (C) 2002 David S. Miller
<6>[ 3.176361] TCP cubic registered
<6>[ 3.177337] NET: Registered protocol family 10
<6>[ 3.181365] NET: Registered protocol family 17
<6>[ 3.181976] NET: Registered protocol family 15
<5>[ 3.182464] Bridge firewalling registered
<6>[ 3.183258] Bluetooth: L2CAP ver 2.15
<6>[ 3.183746] Bluetooth: L2CAP socket layer initialized
<6>[ 3.184020] Bluetooth: SCO (Voice Link) ver 0.6
<6>[ 3.184509] Bluetooth: SCO socket layer initialized
<6>[ 3.185028] Bluetooth: RFCOMM TTY layer initialized
<6>[ 3.185302] Bluetooth: RFCOMM socket layer initialized
<6>[ 3.185760] Bluetooth: RFCOMM ver 1.11
<6>[ 3.186035] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 3.186492] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 3.187652] clock_late_init() disabled 16 unused clocks
<6>[ 3.188171] [Port list] init()
<6>[ 3.188446] [Port list] Virtual Address for port_list: [f812da80]
<6>[ 3.188690] [Port list] Physical Address for port_list: [1F2DA80]
<6>[ 3.190185] cpufreq: cpu0 init at 480000 switching to 352000
<4>[ 3.191009] sapphire_wifi_init: start
<6>[ 3.195281] rs30000048:00010001 rs30000048:00010001: setting system clock to 2012-07-03 06:25:08 UTC (1341296708)
<4>[ 3.196258] Warning: unable to open an initial console.
<6>[ 3.196624] [USB] reset
<6>[ 3.197265] Freeing init memory: 132K
<6>[ 3.198760] [USB] portchange USB_SPEED_HIGH
<3>[ 3.201751] BUG: scheduling while atomic: kmmcd/12/0x00000002
<4>[ 3.202392] Modules linked in:
<4>[ 3.203033] Backtrace:
<4>[ 3.203765] [<c002d6f4>] (dump_backtrace+0x0/0x114) from [<c03f8e14>] (dump_stack+0x18/0x1c)
<4>[ 3.204406] r7:ce260980 r6:c051e3ec r5:c051dfb8 r4:00000000
<4>[ 3.206054] [<c03f8dfc>] (dump_stack+0x0/0x1c) from [<c005ca50>] (__schedule_bug+0x54/0x60)
<4>[ 3.206726] [<c005c9fc>] (__schedule_bug+0x0/0x60) from [<c03f9104>] (schedule+0x74/0x348)
<4>[ 3.207366] r5:c051dfb8 r4:ce26e000
<4>[ 3.208374] [<c03f9090>] (schedule+0x0/0x348) from [<c03f9c44>] (schedule_timeout+0x1d0/0x204)
<4>[ 3.209045] [<c03f9a74>] (schedule_timeout+0x0/0x204) from [<c03f9ca0>] (schedule_timeout_uninterruptible+0x28/0x2c)
<4>[ 3.209716] r6:ce27f3ac r5:c05453e4 r4:00000011
<4>[ 3.211029] [<c03f9c78>] (schedule_timeout_uninterruptible+0x0/0x2c) from [<c006f844>] (msleep+0x1c/0x2c)
<4>[ 3.211730] [<c006f828>] (msleep+0x0/0x2c) from [<c0050a70>] (sapphire_sdslot_switchvdd+0x78/0x150)
<4>[ 3.212432] [<c00509f8>] (sapphire_sdslot_switchvdd+0x0/0x150) from [<c02a9d3c>] (msmsdcc_set_ios+0x264/0x568)
<4>[ 3.213073] r5:ce27f240 r4:ce27f4a0
<4>[ 3.214111] [<c02a9ad8>] (msmsdcc_set_ios+0x0/0x568) from [<c029f900>] (mmc_power_up+0x80/0xb8)
<4>[ 3.214782] [<c029f880>] (mmc_power_up+0x0/0xb8) from [<c02a0f30>] (mmc_rescan+0x338/0x470)
<4>[ 3.215423] r5:ce27f414 r4:ce27f240
<4>[ 3.216461] [<c02a0bf8>] (mmc_rescan+0x0/0x470) from [<c0077164>] (worker_thread+0x18c/0x23c)
<4>[ 3.217132] [<c0076fd8>] (worker_thread+0x0/0x23c) from [<c007ac44>] (kthread+0x84/0x8c)
<4>[ 3.217498] [<c007abc0>] (kthread+0x0/0x8c) from [<c0067b24>] (do_exit+0x0/0x6b4)
<4>[ 3.218139] r7:00000013 r6:c0067b24 r5:c007abc0 r4:ce217ef0
<6>[ 3.249969] [USB] send connect type 1
<6>[ 3.250244] [BATT] online=1
<6>[ 3.250457] [BATT] Update SMEM: cable type 1 at 2174335182 (2012-07-03 06:25:08.555241470 UTC)
<4>[ 3.256774] Smartass: frequency change failed: 576000 to 614000 => 576000
<6>[ 3.309356] [USB] reset
<6>[ 3.309631] [USB] portchange USB_SPEED_HIGH
<4>[ 3.321105] Smartass: frequency change failed: 576000 to 614000 => 576000
<6>[ 3.442352] android_usb gadget: high speed config #1: android
<6>[ 3.481231] keychord: using input dev sapphire-keypad for fevent
<6>[ 3.487915] yaffs: dev is 32505859 name is "mtdblock3"
<6>[ 3.488159] yaffs: passed flags ""
<4>[ 3.488403] yaffs: Attempting MTD mount on 31.3, "mtdblock3"
<4>[ 3.547363] yaffs: restored from checkpoint
<4>[ 3.548034] yaffs_read_super: isCheckpointed 1
<6>[ 3.557708] yaffs: dev is 32505861 name is "mtdblock5"
<6>[ 3.558074] yaffs: passed flags ""
<4>[ 3.558288] yaffs: Attempting MTD mount on 31.5, "mtdblock5"
<4>[ 3.576934] Smartass: frequency change failed: 576000 to 614000 => 576000
<4>[ 4.117340] mmc1: high speed mode max_dtr = 50000000
<4>[ 4.118011] mmc1: host does not support reading read-only switch. assuming write-enable.
<6>[ 4.118255] mmc1: new high speed SDHC card at address 1234
<6>[ 4.119750] mmcblk0: mmc1:1234 SA08G 7.42 GiB
<4>[ 4.120941] check_partition: Allocate memory for SD/eMMC card partition description (Once)
<6>[ 4.121398] mmcblk0: p1
<4>[ 4.127166] Smartass: frequency change failed: 576000 to 614000 => 576000
..........repeat line......
<4>[ 16.611480] yaffs_read_super: isCheckpointed 0
this is my patch , you need sapphire_gpio_write replace gpio_direction_output in board_sapphire.c, and will boot. good lucky!
View attachment 0703.zip
This is a great topic... I will follow it closely! And try to help...
Sent from my Dream/Sapphire using Tapatalk 2
I'm just a beginner at kernel programming, poor programming skills , and English is worse. Please have the abilities and interests to help me fixed it. blizard80, how to fix gpio error and touchscreen ?
dmesg on normal touchscreen:
===============================
<6>[ 4.955047] synaptics_ts_probe: Product Major Version 3
<6>[ 4.955749] synaptics_ts_probe: Product Minor Version 1
<6>[ 4.956451] synaptics_ts_probe: product property 2
<6>[ 4.957122] synaptics_ts_probe: device control 81
<6>[ 4.957824] synaptics_ts_probe: interrupt enable 3
<6>[ 4.959655] synaptics_ts_probe: 0xe0: 1 1 1 2 3 1 0 1
<6>[ 4.960723] synaptics_ts_probe: Sensor properties 601
<6>[ 4.964141] synaptics_ts_probe: max_x 3475, max_y 5328
<6>[ 4.964172] synaptics_ts_probe: inactive_x -40 -40, inactive_y -31 -31
<6>[ 4.964202] synaptics_ts_probe: snap_x 40-48 40-48, snap_y 79-87 79-87
<6>[ 4.964233] synaptics_ts_probe: margin_pixel_left: 0, margin_pixel_right:
0, margin_pixel_top: 0, margin_pixel_bottom: 0
<6>[ 4.964263] synaptics_ts_probe: ts_raw_width: 3395, ts_raw_height: 5266
<6>[ 4.964691] input: synaptics-rmi-touchscreen as /devices/virtual/input/inp
ut1
<6>[ 4.965667] synaptics_ts_probe: Start touchscreen synaptics-rmi-touchscree
n in interrupt mode
on no touchscreen lack this lines:
<6>[ 4.964233] synaptics_ts_probe: margin_pixel_left: 0, margin_pixel_right:
0, margin_pixel_top: 0, margin_pixel_bottom: 0
<6>[ 4.964263] synaptics_ts_probe: ts_raw_width: 3395, ts_raw_height: 5266
Wow, I thought the magic was dead and gone, I just happened to get one one back from a family member.
I've been working on the Ns and have been bored as of late, I'll re-download my sources and see what I can do about the deed-sleep issue.
Edit: as soon as it charges up, it is sooooo dead, charge light didn't even come on for 5 minutes, hope it works still, Crosses fingers
Ohh,carz,thank you very much for 32A NR! I find a lost diffrent between aosp kernel source and hero-kernel-2.6.35. Touchscreen problem maybe gpio driver changed from 2.6.29 to 2.6.35. And I confirm that deep sleep is ok, I use es taskmanager set auto flight mode from 0:00 to 7:00.
carz... thanks to you i stil use my htc magic as my phone!
hope you can update your ROM to cm7 oficial release source.
I don't remember if our kernel supports this, but this is a nice GUI for looking at CPU state history:
https://play.google.com/store/apps/details?id=com.bvalosek.cpuspy
Hopefully that helps.
I like the idea of using the kernel based on Hero, because it means we can port the Hero ROMs easier, and they closely match our device more closely than the G1/32B Magic. The extra RAM really defines the type of configuration you would set.
I find set min rate to 264000 can reslove sleep problem, Pls try it.
ziyouwa said:
I find set min rate to 264000 can reslove sleep problem, Pls try it.
Click to expand...
Click to collapse
Sounds promising. Didn't know why I didn't try playing around with acpuclock earlier.
I killed of 245MHz and upped voltages on the VDD as well. Results:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have no idea how to fix broken bluetooth on the other kernel.
This also would explain the instability I was experiencing with old radio ROMs based on cm-kernel sources.
Excited if this works. Thanks to croniccorey and ziyouwa.
Also noticed some differences in VDD.
To follow up on the acpuclock, carz kernel source has the following VDDs:
Code:
{ 19200, ACPU_PLL_TCXO, 0, 0, 19200, 0, VDD_0, 30720, 0, 0, 4 },
{ 122880, ACPU_PLL_0, 4, 1, 61440, 1, VDD_1, 61440, 0, 0, 4 },
{ 160000, ACPU_PLL_1, 1, 5, 53333, 2, VDD_1, 61440, 0, 0, 6 },
{ 176000, ACPU_PLL_2, 2, 5, 88000, 1, VDD_1, 61440, 0, 0, 5 },
{ 245760, ACPU_PLL_0, 4, 0, 81920, 2, VDD_2, 61440, 0, 0, 5 },
{ 352000, ACPU_PLL_2, 2, 2, 88000, 3, VDD_4, 128000, 0, 3, 7 },
{ 480000, ACPU_PLL_1, 1, 1, 120000, 3, VDD_6, 120000, 0, 2, -1 },
This is Flykernel:
Code:
/* 0*/ { 19200, ACPU_PLL_TCXO, 0, 0, 19200, 0, VDD_0, 30720, 0, 0, 3 },
/* 1*/ { 122880, ACPU_PLL_0, 4, 1, 61440, 1, VDD_3, 61440, 0, 0, 4 },
/* 2*/ { 160000, ACPU_PLL_1, 1, 5, 53333, 2, VDD_3, 61440, 0, 0, 6 },
/* 3*/ { 176000, ACPU_PLL_2, 2, 5, 88000, 1, VDD_3, 61440, 0, 0, 6 },
/* 4*/ { 245760, ACPU_PLL_0, 4, 0, 81920, 2, VDD_4, 61440, 0, 0, 6 },
/* 5*/ { 264000, ACPU_PLL_2, 2, 3, 88000, 2, VDD_3, 128000, 0, 0, 8 },
/* 6*/ { 352000, ACPU_PLL_2, 2, 2, 88000, 3, VDD_5, 128000, 0, 3, 13 },
/* 7*/ { 480000, ACPU_PLL_1, 1, 1, 120000, 3, VDD_6, 120000, 0, 4, 20 },
/* 8*/ { 518400, ACPU_PLL_2, 2, 1, 132000, 3, VDD_6, 160000, 0, 5, -1, 0x1b },
/* 9*/ { 528000, ACPU_PLL_2, 2, 1, 132000, 3, VDD_6, 160000, 0, 5, -1 },
Working one that plugs into carz kernel is attached.
Edit 2:
I think just removing 245MHz did the trick. Good call ziyouwa.
Hero devs actually DO NOT INCLUDE 245MHz with Flykernel as one of the selectable frequencies for our Hboot/radio combination.
I have reverted the VDD levels, and deep sleep is still working.
Very nice,xaueious! I think 2.6.29 is too old, 2.6.35 maybe is good choice. Who can help fix touchscreen in hero-kernel-2.6.35?
ziyouwa said:
Very nice,xaueious! I think 2.6.29 is too old, 2.6.35 maybe is good choice. Who can help fix touchscreen in hero-kernel-2.6.35?
Click to expand...
Click to collapse
Not sure about touchscreen. But this fix is for 2.6.34.4 (https://github.com/carz2/cm-kernel), which isn't as old as 2.6.29.
This builds with the device tree here: https://github.com/carz2/android_device_htc_dream_sapphire
You need to run vendor_setup.sh or do the equivalent. Working proprietary bits are in latest carz CM7 build. I only know how to build AOSP ROMs, and have little HTC ROM porting experience. So I can't really help with that .
Edit:
There is an existing 2.6.35.10 kernel by SebastianFM (https://github.com/SebastianFM/sapphire-2.6.35), but I think this one also had sleep of death. So maybe it was the 245MHz that was causing SOD for some reason, because the VDDs match my acpuclock. I noticed that the Hero kernels also skip 245MHz.
If you remove 245MHz, we may have a working 2.6.35.10 kernel
uhhm u know i dont know what tormented me to try tis kernel i have the magic 1.2 lol ikr but it is just i recognized that in truth we didnt realy have a kernel build for the 1.2 version for gingerbread the best i can do is flash anykernel by cronmod the kernel ezzbuilt is not working via usb and it gives me a wifi error(atleast on cronmods 1.5 rom) think u can make it happen and even give it 710mhz ability ezz?

Stuck on CWM 6.0.1.3 recovery screen

Hi,
My TF700 is stuck on CWM 6.0.1.3 (non touch) recovery screen, it always goes there.
I was now able to use adb command (it shows serial no 0123456789ABCDE is it normal?).
Fastboot does not work
Can i do something to recover my TF700?
Thanks for your help.
Kalimeruh said:
Hi,
My TF700 is stuck on CWM 6.0.1.3 (non touch) recovery screen, it always goes there.
I was now able to use adb command (it shows serial no 0123456789ABCDE is it normal?).
Fastboot does not work
Can i do something to recover my TF700?
Thanks for your help.
Click to expand...
Click to collapse
What bootloader version do you have? (4.1.1 or 4.2.1)? can you boot into the OS?
buhohitr said:
What bootloader version do you have? (4.1.1 or 4.2.1)? can you boot into the OS?
Click to expand...
Click to collapse
I think it is 4.2.1. I only can get to the CWM recovery (directly).
Kalimeruh said:
I think it is 4.2.1. I only can get to the CWM recovery (directly).
Click to expand...
Click to collapse
Did you try to use CWM to reflash rom/kernel?
buhohitr said:
Did you try to use CWM to reflash rom/kernel?
Click to expand...
Click to collapse
The volume + and - do not work. I'm only able to select option reboot system now.
Is there something that i can do from adb? It is seems to be the only way i can communicate with the tablet.
Kalimeruh said:
The volume + and - do not work. I'm only able to select option reboot system now.
Is there something that i can do from adb? It is seems to be the only way i can communicate with the tablet.
Click to expand...
Click to collapse
I see, OK let do this:
1) Download full Asus firmware and unzip all the way until you see the "blob" file
2) Copy the blob file to your Micro sdcard using your PC then then insert the card back into your tablet
3) On your PC, execute the following adb commands:
adb shell hit enter(you are going to see bunch of weird characters, this's normal)
dd if=/Removable/MicroSD/blob of=/dev/block/mmcblk0p4 hit enter and wait for around 10-20min.
Update process will start and table will reboot once done. Remember you will have stock rom and recovery back once done.
buhohitr said:
I see, OK let do this:
1) Download full Asus firmware and unzip all the way until you see the "blob" file
2) Copy the blob file to your Micro sdcard using your PC then then insert the card back into your tablet
3) On your PC, execute the following adb commands:
adb shell hit enter(you are going to see bunch of weird characters, this's normal)
dd if=/Removable/MicroSD/blob of=/dev/block/mmcblk0p4 hit enter and wait for around 10-20min.
Update process will start and table will reboot once done. Remember you will have stock rom and recovery back once done.
Click to expand...
Click to collapse
Thanks for your reply
I got an error "/Removable/MicroSD/blob no such file or directory".
I'm trying now the abd push blob /sdcard/blob and then i'll do the rest on the command line afterwards.
Do you think it will work?
[Update] Didn't work
When the tablet is connected to the pc the screen is always showing "CWM 6.0.1.3", does that have any influence?
Thanks
I saw that i'm also able to use nvflash and wheelie.
The only command i cannot use is fastboot
Can somebody please help me?
Kalimeruh said:
I saw that i'm also able to use nvflash and wheelie.
The only command i cannot use is fastboot
Can somebody please help me?
Click to expand...
Click to collapse
If you post error messages instead of "doesn't work", maybe.
You said you cannot use fastboot - why?
You said you are able to use nvflash and wheelie, does that mean you also have the required files like "blob.bin", "bricksafe.img" etc.?
_that said:
If you post error messages instead of "doesn't work", maybe.
You said you cannot use fastboot - why?
You said you are able to use nvflash and wheelie, does that mean you also have the required files like "blob.bin", "bricksafe.img" etc.?
Click to expand...
Click to collapse
Basically because i don't have error messages.
I cannot use the fastboot because the tablet is stuck on the screen of the CWM i cannot got out. Either it is on recovery mode or on APX... When i use fastboot command cmd cannot find devices.
Regarding nvflash and wheelie is means that i am able to communicate with the tablet. I have one ebtblob.bin, i tried but i got one error ]Failed to read RCMVERS from blob file.
Can you give me a hint?
Thanks
Kalimeruh said:
I cannot use the fastboot because the tablet is stuck on the screen of the CWM i cannot got out. Either it is on recovery mode or on APX... When i use fastboot command cmd cannot find devices.
Click to expand...
Click to collapse
What happens when you try to enter the bootloader menu? (hold Volume-left while turning the tablet on)
Kalimeruh said:
Regarding nvflash and wheelie is means that i am able to communicate with the tablet. I have one ebtblob.bin, i tried but i got one error ]Failed to read RCMVERS from blob file.
Can you give me a hint?
Click to expand...
Click to collapse
So you don't have a blob for your device, which means you can't use nvflash.
Since you can communicate with the recovery via adb, please post the output of
Code:
adb shell ls -l /dev/block/mmc*
to see if your recovery can access the internal storage.
_that said:
What happens when you try to enter the bootloader menu? (hold Volume-left while turning the tablet on)
It goes directly to CWM 6.0.1.3 (non touch version) where i cannot do anything because volume up and down do not work.
So you don't have a blob for your device, which means you can't use nvflash.
Since you can communicate with the recovery via adb, please post the output of
Code:
adb shell ls -l /dev/block/mmc*
to see if your recovery can access the internal storage.
Click to expand...
Click to collapse
brw------- 1 root root 179, 0 Jan 19 15:52 /dev/block/mmcblk0
brw------- 1 root root 179, 1 Jan 19 15:52 /dev/block/mmcblk0p1
-rw-rw-rw- 1 root root 1088 Jan 19 15:52 /dev/block/mmcblk0p3
Kalimeruh said:
brw------- 1 root root 179, 0 Jan 19 15:52 /dev/block/mmcblk0
brw------- 1 root root 179, 1 Jan 19 15:52 /dev/block/mmcblk0p1
-rw-rw-rw- 1 root root 1088 Jan 19 15:52 /dev/block/mmcblk0p3
Click to expand...
Click to collapse
That's very bad - it should show at least mmcblk0p1 to mmcblk0p8. That means you can't use the recovery to modify anything on your internal storage.
How did you get into this situation? "Wipe data" in the bootloader menu?
_that said:
That's very bad - it should show at least mmcblk0p1 to mmcblk0p8. That means you can't use the recovery to modify anything on your internal storage.
How did you get into this situation? "Wipe data" in the bootloader menu?
Click to expand...
Click to collapse
This happened since i've installed CWM 6.0.1.3, i'm not able to do anything.
Is there any solution?
Kalimeruh said:
This happened since i've installed CWM 6.0.1.3, i'm not able to do anything.
Is there any solution?
Click to expand...
Click to collapse
If you can't get fastboot to work, I have no other idea.
_that said:
If you can't get fastboot to work, I have no other idea.
Click to expand...
Click to collapse
Will this http://forum.xda-developers.com/showthread.php?t=1994705 work for me?
Kalimeruh said:
Will this http://forum.xda-developers.com/showthread.php?t=1994705 work for me?
Click to expand...
Click to collapse
No, that requires a running Android system, or at least a recovery that can access your internal storage.
To get more info about your problem, reboot your tablet and run the following command on your computer:
Code:
adb shell dmesg > dmesg.txt
and post the resulting file.
Also try this:
Code:
adb shell hexdump -C -s 0x380000 -n 8 /dev/block/mmcblk0
and tell me if it outputs "ANDROID!" (after some hexadecimal numbers).
_that said:
No, that requires a running Android system, or at least a recovery that can access your internal storage.
To get more info about your problem, reboot your tablet and run the following command on your computer:
Code:
adb shell dmesg > dmesg.txt
and post the resulting file.
Click to expand...
Click to collapse
Here you are:
<6>[ 0.000000] Initializing cgroup subsys cpu
<5>[ 0.000000] Linux version 2.6.39.4-cyanogenmod-g80ca3c6 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Sep 14 10:04:19 MST 2012
<4>[ 0.000000] CPU: ARMv7 Processor [412fc099] revision 9 (ARMv7), cr=10c5387f
<4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[ 0.000000] Machine: cardhu
<4>[ 0.000000] Ignoring unrecognised tag 0x41000801
<4>[ 0.000000] Ignoring unrecognised tag 0x41000801
<4>[ 0.000000] Ignoring unrecognised tag 0x41000801
<4>[ 0.000000] Ignoring unrecognised tag 0x41000801
<4>[ 0.000000] Ignoring unrecognised tag 0x41000801
<4>[ 0.000000] Ignoring unrecognised tag 0x41000801
<4>[ 0.000000] Ignoring unrecognised tag 0x41000801
<6>[ 0.000000] Found tegra_fbmem: [email protected]
<6>[ 0.000000] Tegra reserved memory:
<6>[ 0.000000] LP0: bddf9000 - bddfafff
<6>[ 0.000000] Bootloader framebuffer: abc01000 - ac4cbfff
<6>[ 0.000000] Framebuffer: bec00000 - bf4fffff
<6>[ 0.000000] 2nd Framebuffer: bf500000 - bfdfffff
<6>[ 0.000000] Carveout: 00000000 - 00000000
<6>[ 0.000000] Vpr: 00000000 - 00000000
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
<7>[ 0.000000] On node 0 totalpages: 256768
<7>[ 0.000000] free_area_init_node: node 0, pgdat c082d200, node_mem_map c0989000
<7>[ 0.000000] Normal zone: 1536 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 195072 pages, LIFO batch:31
<7>[ 0.000000] HighMem zone: 508 pages used for memmap
<7>[ 0.000000] HighMem zone: 59652 pages, LIFO batch:15
<6>[ 0.000000] Tegra3: CPU Speedo ID 5, CPU Process ID 3, Soc Speedo ID 2
<6>[ 0.000000] Tegra Revision: A03 SKU: 0x80 CPU Process: 3 Core Process: 0
<6>[ 0.000000] tegra: PLLP fixed rate: 408000000
<6>[ 0.000000] [MISC]: adopt kernel cmdline prior to tegra3_get_project_id ready.
<4>[ 0.000000] Lowering cpu_lp maximum rate from 620000000 to 513000000
<4>[ 0.000000] Lowering sbus maximum rate from 334000000 to 267000000
<4>[ 0.000000] Lowering vi maximum rate from 425000000 to 409000000
<4>[ 0.000000] Lowering vde maximum rate from 600000000 to 437000000
<4>[ 0.000000] Lowering mpe maximum rate from 600000000 to 446000000
<4>[ 0.000000] Lowering 2d maximum rate from 600000000 to 446000000
<4>[ 0.000000] Lowering epp maximum rate from 600000000 to 446000000
<4>[ 0.000000] Lowering 3d maximum rate from 600000000 to 446000000
<4>[ 0.000000] Lowering 3d2 maximum rate from 600000000 to 446000000
<4>[ 0.000000] Lowering se maximum rate from 600000000 to 446000000
<4>[ 0.000000] Lowering host1x maximum rate from 300000000 to 267000000
<4>[ 0.000000] Lowering cbus maximum rate from 700000000 to 437000000
<4>[ 0.000000] Lowering pll_c maximum rate from 1400000000 to 1066000000
<4>[ 0.000000] Lowering ndflash maximum rate from 240000000 to 200000000
<4>[ 0.000000] Lowering sbc1 maximum rate from 160000000 to 100000000
<4>[ 0.000000] Lowering sbc2 maximum rate from 160000000 to 100000000
<4>[ 0.000000] Lowering sbc3 maximum rate from 160000000 to 100000000
<4>[ 0.000000] Lowering sbc4 maximum rate from 160000000 to 100000000
<4>[ 0.000000] Lowering sbc5 maximum rate from 160000000 to 100000000
<4>[ 0.000000] Lowering sbc6 maximum rate from 160000000 to 100000000
<4>[ 0.000000] Lowering dsia maximum rate from 500000000 to 275000000
<4>[ 0.000000] Lowering dsib maximum rate from 500000000 to 275000000
<4>[ 0.000000] Lowering cpu_g maximum rate from 1900000000 to 1370000000
<4>[ 0.000000] Keep max_rate of cpu_g as 1900000000
<4>[ 0.000000] max_millivolts of cpu_g is d->max_millivolts =1275
<4>[ 0.000000] tegra3_dvfs: cold offset 50000000 is too high for regular dvfs limit 1000000
<4>[ 0.000000] tegra3_dvfs: cold offset 50000000 is too high for regular dvfs limit 1000000
<6>[ 0.000000] tegra dvfs: VDD_CPU nominal 1075mV, scaling enabled
<6>[ 0.000000] tegra dvfs: VDD_CORE nominal 1200mV, scaling enabled
<6>[ 0.000000] L310 cache controller enabled
<6>[ 0.000000] l2x0: 8 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x7c080001, Cache size: 1048576 B
<6>[ 0.000000] PERCPU: Embedded 8 pages/cpu @c1191000 s8992 r8192 d15584 u32768
<7>[ 0.000000] pcpu-alloc: s8992 r8192 d15584 u32768 alloc=8*4096
<7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 254724
<5>[ 0.000000] Kernel command line: tegraid=30.1.3.0.0 [email protected] commchip_id=0 androidboot.serialno=015d2d431f0c0208 androidboot.commchip_id=0 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,0 usbcore.old_scheme_first=1 [email protected] [email protected] core_edp_mv=0 audio_codec=wm8903 board_info=245:0:14:ed:28 tegraboot=sdmmc gpt gpt_sector=62078975 android.kerneltype=recovery androidboot.productid=0x04 androidboot.carrier=wifi-only
<6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.000000] Memory: 1003MB = 1003MB total
<5>[ 0.000000] Memory: 997352k/997352k available, 49176k reserved, 240632K highmem
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
<5>[ 0.000000] vmalloc : 0xf0800000 - 0xf8000000 ( 120 MB)
<5>[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
<5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
<5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
<5>[ 0.000000] .init : 0xc0008000 - 0xc0042000 ( 232 kB)
<5>[ 0.000000] .text : 0xc0042000 - 0xc075ce44 (7276 kB)
<5>[ 0.000000] .data : 0xc075e000 - 0xc082edc0 ( 836 kB)
<6>[ 0.000000] Preemptable hierarchical RCU implementation.
<6>[ 0.000000] RCU-based detection of stalled CPUs is disabled.
<6>[ 0.000000] Verbose stalled-CPUs detection is disabled.
<6>[ 0.000000] NR_IRQS:800
<6>[ 0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
<6>[ 0.000202] Calibrating delay loop... 996.14 BogoMIPS (lpj=4980736)
<6>[ 0.040062] pid_max: default: 32768 minimum: 301
<6>[ 0.040237] Mount-cache hash table entries: 512
<6>[ 0.040960] Initializing cgroup subsys debug
<6>[ 0.040972] Initializing cgroup subsys cpuacct
<6>[ 0.041033] Initializing cgroup subsys freezer
<6>[ 0.041060] CPU: Testing write buffer coherency: ok
<6>[ 0.041304] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
<4>[ 0.161490] CPU1: Booted secondary processor
<4>[ 0.221464] CPU2: Booted secondary processor
<4>[ 0.281459] CPU3: Booted secondary processor
<6>[ 0.301280] Brought up 4 CPUs
<6>[ 0.301291] SMP: Total of 4 processors activated (3984.58 BogoMIPS).
<6>[ 0.304893] print_constraints: dummy:
<6>[ 0.305082] NET: Registered protocol family 16
<6>[ 0.305853] host1x bus init
<6>[ 0.306779] [MISC]: adopt kernel cmdline prior to tegra3_get_project_id ready.
<6>[ 0.306788] [MISC]: adopt kernel cmdline prior to tegra3_get_project_id ready.
<4>[ 0.307991] Check TF700T pinmux
<4>[ 0.308115] tegra_booting_info reg=0
<4>[ 0.308121] tegra_booting_info-normal
<6>[ 0.308489] cardhu_edp_init : use asus edp policy
<6>[ 0.308534] Selecting UARTA as the debug console
<4>[ 0.308547] console_none_on_cmdline+uart_debug_init
<6>[ 0.308554] The debug console clock name is uarta_dbg
<6>[ 0.309757] ram_console: got buffer at beb00000, size 100000
<6>[ 0.309937] ram_console: uncorrectable error in header
<6>[ 0.309946] ram_console: no valid data in buffer (sig = 0x02034044)
<6>[ 0.324235] console [ram-1] enabled
<6>[ 0.324550] TPS6591x GPIO2 was reprogrammed to follow state of SLEEP input
<6>[ 0.324735] Registering the device TPS62361B
<6>[ 0.451272] Registering tegra-kbc
<6>[ 0.451437] Registering gpio keys
<4>[ 0.451665] Check TF202T setting
<4>[ 0.451669]
<6>[ 0.494957] fjm6mo i2c_register_board_info
<6>[ 0.495151] mi1040 i2c_register_board_info
<6>[ 0.495413] iCatch7002a i2c_register_board_info
<6>[ 0.495603] *** MPU START *** cardhu_mpuirq_init...
<6>[ 0.495871] initial mpu with TF700T config...
<6>[ 0.495971] *** MPU END *** mpuirq_init...
<7>[ 0.496177] gpio_request: gpio-72 (GMI_CS0) status -16
<3>[ 0.496354] set_unused_pin_gpio() Error in gpio_request() for gpio 72
<7>[ 0.496451] gpio_request: gpio-74 (GMI_CS1) status -16
<3>[ 0.496625] set_unused_pin_gpio() Error in gpio_request() for gpio 74
<7>[ 0.496725] gpio_request: gpio-83 (GMI_CS2) status -16
<3>[ 0.496900] set_unused_pin_gpio() Error in gpio_request() for gpio 83
<4>[ 0.497003] BOARD_PM269:TF700T_Elpida 800 MHZ version 5 (0413)
<3>[ 0.497260] tegra: invalid EMC DFS table: maximum rate 800000 kHz does not match nominal voltage 1200
<6>[ 0.497521] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
<6>[ 0.497622] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
<6>[ 0.497813] hw-breakpoint: maximum watchpoint size is 4 bytes.
<6>[ 0.498252] tegra_iovmm_register: added iovmm-smmu
<6>[ 0.504633] bio: create slab <bio-0> at 0
<6>[ 0.505324] vgaarb: loaded
<4>[ 0.505471] i2c-core: driver [tps6591x] using legacy suspend method
<4>[ 0.505646] i2c-core: driver [tps6591x] using legacy resume method
<4>[ 0.505840] i2c-core: driver [tps80031] using legacy suspend method
<4>[ 0.505936] i2c-core: driver [tps80031] using legacy resume method
<4>[ 0.506150] i2c-core: driver [ricoh583] using legacy suspend method
<4>[ 0.506247] i2c-core: driver [ricoh583] using legacy resume method
<5>[ 0.506682] SCSI subsystem initialized
<6>[ 0.506863] tegra-otg tegra-otg: otg transceiver registered
<6>[ 0.507185] usbcore: registered new interface driver usbfs
<6>[ 0.507350] usbcore: registered new interface driver hub
<6>[ 0.507624] usbcore: registered new device driver usb
<6>[ 0.509175] tps6591x 4-002d: VERNUM is 02
<6>[ 0.531278] Wake18 for irq=118
<6>[ 0.531452] Enabling wake18
<6>[ 0.531881] print_constraints: tps6591x_VIO: 1500 <--> 3300 mV at 1800 mV normal standby
<6>[ 0.532706] print_constraints: tps6591x_VDD_1: 600 <--> 1500 mV at 600 mV normal standby
<6>[ 0.533285] print_constraints: tps6591x_VDD_2: 600 <--> 1500 mV at 1200 mV normal standby
<6>[ 0.534152] print_constraints: tps6591x_VDDCTRL: 600 <--> 1400 mV at 1025 mV normal standby
<6>[ 0.534658] print_constraints: tps6591x_LDO_1: 1000 <--> 3300 mV at 2850 mV normal standby
<6>[ 0.534774] set_supply: tps6591x_LDO_1: supplied by tps6591x_VDD_2
<6>[ 0.535285] print_constraints: tps6591x_LDO_2: 1050 <--> 3300 mV at 1000 mV normal standby
<6>[ 0.535477] set_supply: tps6591x_LDO_2: supplied by tps6591x_VDD_2
<6>[ 0.535855] print_constraints: tps6591x_LDO_3: 1000 <--> 3300 mV at 1000 mV normal standby
<6>[ 0.536366] print_constraints: tps6591x_LDO_4: 1000 <--> 3300 mV at 1200 mV normal standby
<6>[ 0.536799] print_constraints: tps6591x_LDO_5: 1000 <--> 3300 mV at 1000 mV normal standby
<6>[ 0.537350] print_constraints: tps6591x_LDO_6: 1200 mV normal standby
<6>[ 0.537544] set_supply: tps6591x_LDO_6: supplied by tps6591x_VIO
<6>[ 0.538307] print_constraints: tps6591x_LDO_7: 1200 mV normal standby
<6>[ 0.538422] set_supply: tps6591x_LDO_7: supplied by tps6591x_VIO
<6>[ 0.539020] print_constraints: tps6591x_LDO_8: 1000 <--> 3300 mV at 1000 mV normal standby
<6>[ 0.539136] set_supply: tps6591x_LDO_8: supplied by tps6591x_VIO
<6>[ 0.539911] tps6591x register misc device for I2C stress test rc=0
<6>[ 0.546588] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[ 0.547109] Bluetooth: Core ver 2.16
<6>[ 0.547243] NET: Registered protocol family 31
<6>[ 0.547419] Bluetooth: HCI device and connection manager initialized
<6>[ 0.547518] Bluetooth: HCI socket layer initialized
<6>[ 0.547689] Bluetooth: L2CAP socket layer initialized
<6>[ 0.547869] Bluetooth: SCO socket layer initialized
<6>[ 0.548319] cfg80211: Calling CRDA to update world regulatory domain
<6>[ 0.549190] print_constraints: fixed_reg_en_5v_cp: 5000 mV normal standby
<6>[ 0.550120] print_constraints: fixed_reg_en_5v0: 5000 mV normal standby
<6>[ 0.550848] print_constraints: fixed_reg_en_ddr: 1500 mV normal standby
<6>[ 0.551481] print_constraints: fixed_reg_en_3v3_sys: 3300 mV normal standby
<6>[ 0.552013] print_constraints: fixed_reg_en_3v3_modem: 3300 mV normal standby
<6>[ 0.552312] print_constraints: fixed_reg_cam1_ldo_en: 2800 mV normal standby
<6>[ 0.552500] set_supply: fixed_reg_cam1_ldo_en: supplied by fixed_reg_en_3v3_sys
<6>[ 0.552783] print_constraints: fixed_reg_cam2_ldo_en: 2800 mV normal standby
<6>[ 0.552892] set_supply: fixed_reg_cam2_ldo_en: supplied by fixed_reg_en_3v3_sys
<6>[ 0.553235] print_constraints: fixed_reg_cam3_ldo_en: 3300 mV normal standby
<6>[ 0.553337] set_supply: fixed_reg_cam3_ldo_en: supplied by fixed_reg_en_3v3_sys
<6>[ 0.553699] print_constraints: fixed_reg_en_vdd_com: 3300 mV normal standby
<6>[ 0.553887] set_supply: fixed_reg_en_vdd_com: supplied by fixed_reg_en_3v3_sys
<6>[ 0.554179] print_constraints: fixed_reg_en_3v3_fuse: 3300 mV normal standby
<6>[ 0.554368] set_supply: fixed_reg_en_3v3_fuse: supplied by fixed_reg_en_3v3_sys
<6>[ 0.554734] print_constraints: fixed_reg_en_3v3_emmc: 3300 mV normal standby
<6>[ 0.554840] set_supply: fixed_reg_en_3v3_emmc: supplied by fixed_reg_en_3v3_sys
<6>[ 0.555207] print_constraints: fixed_reg_en_1v8_cam: 1800 mV normal standby
<6>[ 0.555317] set_supply: fixed_reg_en_1v8_cam: supplied by tps6591x_VIO
<6>[ 0.555717] print_constraints: fixed_reg_dis_5v_switch: 5000 mV normal standby
<6>[ 0.555905] set_supply: fixed_reg_dis_5v_switch: supplied by fixed_reg_en_5v0
<6>[ 0.556322] print_constraints: fixed_reg_en_vdd_bl: 5000 mV normal standby
<6>[ 0.556692] print_constraints: fixed_reg_en_vdd_pnl1: 3300 mV normal standby
<6>[ 0.556880] set_supply: fixed_reg_en_vdd_pnl1: supplied by fixed_reg_en_3v3_sys
<6>[ 0.558281] print_constraints: tps62361B: 500 <--> 1770 mV at 1160 mV normal standby
<6>[ 0.558641] tps6236x register misc device for I2C stress test rc=0 tps->chip_id=1 chip_id=87
<6>[ 0.559016] print_constraints: gpio-switch-en_usb1_vbus_oc: 5000 mV normal standby
<7>[ 0.559176] gpio_request: gpio-122 (gpio-switch-en_vddio_vid_oc) status -16
<3>[ 0.559360] gpio-switch-regulator gpio-switch-regulator.17: Unable to request gpio 122
<3>[ 0.559540] gpio-switch-regulator gpio-switch-regulator.17: Unable to register regulator gpio-switch-en_vddio_vid_oc
<6>[ 0.559810] tegra: started io power detection dynamic control
<6>[ 0.559909] tegra: NO_IO_POWER setting 0x1200
<6>[ 0.560008] Switching to clocksource timer_us
<4>[ 0.560208] stop_machine_cpu_stop cpu=1
<4>[ 0.560216] stop_machine_cpu_stop cpu=2
<4>[ 0.560223] stop_machine_cpu_stop cpu=3
<4>[ 0.560230] stop_machine_cpu_stop cpu=0
<4>[ 0.560667] __stop_cpus: wait_for_completion_timeout+
<4>[ 0.560842] __stop_cpus: smp=0 done.executed=1 done.ret =0-
<6>[ 0.561290] Switched to NOHz mode on CPU #0
<6>[ 0.561498] Switched to NOHz mode on CPU #3
<6>[ 0.561505] Switched to NOHz mode on CPU #2
<6>[ 0.561535] Switched to NOHz mode on CPU #1
<6>[ 0.562155] tegra-nvmap tegra-nvmap: created carveout iram (255KiB)
<6>[ 0.563130] NET: Registered protocol family 2
<6>[ 0.563473] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.564003] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
<6>[ 0.565699] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
<6>[ 0.566618] TCP: Hash tables configured (established 131072 bind 65536)
<6>[ 0.566795] TCP reno registered
<6>[ 0.566894] UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 0.567092] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 0.567607] NET: Registered protocol family 1
<6>[ 0.568039] RPC: Registered udp transport module.
<6>[ 0.568140] RPC: Registered tcp transport module.
<6>[ 0.568316] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[ 0.568416] PCI: CLS 0 bytes, default 32
<6>[ 0.568662] Unpacking initramfs...
<6>[ 0.647416] Freeing initrd memory: 1796K
<6>[ 0.647648] PMU: registered new PMU device of type 0
<6>[ 0.648210] Tegra auto-hotplug initialized: disabled
<4>[ 0.648312] tegra_cpufreq_init freq_table_size=14
<6>[ 0.648414] cpu-tegra: init EDP limit: 1550 MHz
<4>[ 0.648629] tegra_cpu_init : emc_clk->min_rate to 204M
<4>[ 0.648889] [Warning]tegra3_cpu_clk_set_rate set vdd_cpu as power source for cpu_g reg=ef946120
<4>[ 0.649296] tegra_cpu_init : emc_clk->min_rate to 204M
<4>[ 0.649486] tegra_cpu_init : emc_clk->min_rate to 204M
<4>[ 0.649672] tegra_cpu_init : emc_clk->min_rate to 204M
<6>[ 0.649939] vibrator_init+ #####
<6>[ 0.650191] vibrator_init- #####
<4>[ 0.670855] highmem bounce pool size: 64 pages
<6>[ 0.671113] ashmem: initialized
<6>[ 0.672253] fuse init (API version 7.16)
<6>[ 0.672490] Registering char device tf_driver (122:0)
<6>[ 0.673537] io scheduler noop registered
<6>[ 0.673702] io scheduler deadline registered
<6>[ 0.673831] io scheduler cfq registered (default)
<4>[ 0.674167] Check create a new adapter
<6>[ 0.694086] tegra_grhost tegra_grhost: initialized
<6>[ 0.694220] tegra_dc_module_init+ #####
<6>[ 0.694464] tegra_dc_module_init- #####
<4>[ 0.694926] Disp: diff_msec= 5938
<4>[ 0.695086] Check cardhu_panel_enable
<4>[ 0.695245] Check panel is panasonic
<4>[ 0.720676] Check power on/off for bridge IC
<4>[ 0.720766] Check enable TF301_1.8V
<4>[ 0.730939] Check enable TF301_I2C_Switch
<4>[ 0.741042] Check enable TF301_OSC
<4>[ 0.761127] Check tegra_dc_rgb_enable
<4>[ 0.761283] Check set polarity
<6>[ 0.761414] tegradc tegradc.0: probed
<6>[ 0.761710] tegradc tegradc.0: probed
<6>[ 0.762070] Wake4 for irq=335
<6>[ 0.762575] nvhdcp: using "always on" policy.
<6>[ 0.762920] tegradc tegradc.1: probed
<6>[ 0.763234] tegradc tegradc.1: probed
<3>[ 0.763345] hdmi: couldn't get regulator vdd_hdmi_con
<6>[ 0.763442] Wake4 for irq=335
<6>[ 0.763603] Enabling wake4
<6>[ 0.763692] gpio bank wake found: wake4 for irq=67
<6>[ 0.763779] Enabling wake4
<6>[ 0.764160] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[ 1.410772] serial8250.0: ttyS0 at MMIO 0x70006000 (irq = 68) is a Tegra
<6>[ 3.026014] console [ttyS0] enabled
<6>[ 3.150802] tegra_uart_init+ #####
<6>[ 3.154346] tegra_uart.1: ttyHS1 at I/O 0x0 (irq = 69) is a unknown
<6>[ 3.310681] Registered UART port ttyHS1
<6>[ 3.314658] tegra_uart.2: ttyHS2 at I/O 0x0 (irq = 78) is a unknown
<6>[ 3.470679] Registered UART port ttyHS2
<6>[ 3.474652] tegra_uart.3: ttyHS3 at I/O 0x0 (irq = 122) is a unknown
<6>[ 3.630680] Registered UART port ttyHS3
<6>[ 3.634653] tegra_uart.4: ttyHS4 at I/O 0x0 (irq = 123) is a unknown
<6>[ 3.790678] Registered UART port ttyHS4
<6>[ 3.794737] tegra_uart_init- #####
<6>[ 3.798212] Initialized tegra uart driver
<6>[ 3.804472] loop: module loaded
<4>[ 3.807866] i2c-core: driver [apds9802als] using legacy suspend method
<4>[ 3.814485] i2c-core: driver [apds9802als] using legacy resume method
<4>[ 3.821122] nct1008_probe+
<4>[ 3.823926] nct1008_power_control
<6>[ 3.827318] nct1008 4-004c: success in enabling rail vdd_nct1008
<6>[ 3.835702] nct1008 register misc device for I2C stress test rc=0
<6>[ 3.841955] nct1008 4-004c: nct1008_probe: initialized
<4>[ 3.921247] nct1008_get_temp: ret temp=26C
<4>[ 3.926344] nct1008_get_temp: ret temp=26C
<4>[ 3.930969] tegra_watchdog_enable timeout=45
<4>[ 3.935316] nct1008_probe-
<4>[ 3.938136] i2c-core: driver [nct1008] using legacy suspend method
<4>[ 3.944472] i2c-core: driver [nct1008] using legacy resume method
<6>[ 3.950646] bcm4329_rfkill_init+ #####
<4>[ 3.954610] bcm4329_rfkill_probe: can't find bcm4329_32k_clk. assuming 32k clock to chip
<4>[ 3.963042] bcm4329_rfkill_probe : can't find reset gpio.
<6>[ 3.968699] bcm4329_rfkill_init- #####
<6>[ 3.972533] mpu_init+ #####
<6>[ 3.975401] mpu_init- #####
<6>[ 3.978400] kxtf9_mod_init+ #####
<6>[ 3.981806] kxtf9_mod_init- #####
<6>[ 3.985193] ami306_mod_init+ #####
<6>[ 3.988741] ami306_mod_init- #####
<3>[ 3.992300] vibrator_init:Couldn't get regulator vdd_vbrtr
<6>[ 3.997911] Loading pn544 driver
<7>[ 4.001332] gpio_request: gpio-184 (nfc_int) status -16
<6>[ 4.006857] PPP generic driver version 2.4.2
<6>[ 4.011315] PPP Deflate Compression module registered
<6>[ 4.016510] PPP BSD Compression module registered
<6>[ 4.023016] PPP MPPE Compression module registered
<6>[ 4.027959] NET: Registered protocol family 24
<6>[ 4.032521] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
<6>[ 4.040070] tun: Universal TUN/TAP device driver, 1.6
<6>[ 4.045211] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
<6>[ 4.051696] usbcore: registered new interface driver asix
<6>[ 4.057198] usbcore: registered new interface driver cdc_ether
<6>[ 4.063225] usbcore: registered new interface driver smsc95xx
<6>[ 4.069071] usbcore: registered new interface driver cdc_subset
<6>[ 4.075148] cdc_ncm: 23-Apr-2011
<6>[ 4.078480] usbcore: registered new interface driver cdc_ncm
<6>[ 4.084296] asuspec_init+ #####
<5>[ 4.087513] asuspec: [asuspec_init] cdev_alloc
<6>[ 4.092222] Wake9 for irq=370
<6>[ 4.095339] Wake9 for irq=370
<6>[ 4.098451] Enabling wake9
<6>[ 4.101232] gpio bank wake found: wake9 for irq=87
<6>[ 4.106086] Enabling wake9
<5>[ 4.108976] asuspec: [asuspec_send_ec_req] send EC_Request
<4>[ 4.114590] i2c-core: driver [asuspec] using legacy suspend method
<4>[ 4.120925] i2c-core: driver [asuspec] using legacy resume method
<6>[ 4.127190] asuspec_init- #####
<6>[ 4.130407] asusdec_init+ #####
<5>[ 4.133707] asusdec: [asusdec_init] cdev_alloc
<3>[ 4.138394] power_supply dock_battery: driver failed to report `status' property
<3>[ 4.145988] power_supply dock_battery: driver failed to report `status' property
<6>[ 4.153613] input: lid_input as /devices/platform/tegra-i2c.1/i2c-1/1-0019/input/input0
<6>[ 4.161867] Wake28 for irq=374
<6>[ 4.165025] Wake28 for irq=374
<6>[ 4.168222] Enabling wake28
<5>[ 4.171123] asusdec: [asusdec_irq_hall_sensor] LID open
<6>[ 4.176443] Wake29 for irq=375
<6>[ 4.179670] Wake29 for irq=375
<6>[ 4.182797] Enabling wake29
<4>[ 4.185722] i2c-core: driver [asusdec] using legacy suspend method
<5>[ 4.185746] asusdec: [asusdec_dock_init_work_function] TF201 dock-init
<5>[ 4.185755] asusdec: [asusdec_dock_init_work_function] No dock detected
<4>[ 4.205387] i2c-core: driver [asusdec] using legacy resume method
<6>[ 4.211651] asusdec_init- #####
<6>[ 4.214941] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 4.221588] tegra_ehci_probe+ #####
<3>[ 4.229324] Timed out waiting for lock bit on pll pll_u
<6>[ 4.234495] phy->instance= 2 , phy->xcvr_setup_value=61
<5>[ 4.240695] asusdec: [asusdec_lid_report_function] SW_LID report value = 0
<6>[ 4.242601] tegra-ehci tegra-ehci.2: Tegra EHCI Host Controller
<6>[ 4.242720] tegra-ehci tegra-ehci.2: new USB bus registered, assigned bus number 1
<5>[ 4.261403] asusdec: [asusdec_pad_battery_report_function] dock_in = 0, ret_val = -1
<4>[ 4.269287] audio_dock_in_out: global_audio_codec is NULL
<5>[ 4.274768] asusdec: [asusAudiodec_in_out_work_function] audio dock out
<6>[ 4.320699] tegra-ehci tegra-ehci.2: irq 129, io mem 0x7d008000
<6>[ 4.340690] tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.00
<6>[ 4.346738] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[ 4.353683] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[ 4.360984] usb usb1: Product: Tegra EHCI Host Controller
<6>[ 4.366525] usb usb1: Manufacturer: Linux 2.6.39.4-cyanogenmod-g80ca3c6 ehci_hcd
<6>[ 4.373997] usb usb1: SerialNumber: tegra-ehci.2
<6>[ 4.379036] hub 1-0:1.0: USB hub found
<6>[ 4.382918] hub 1-0:1.0: 1 port detected
<7>[ 4.387227] gpio_request: gpio-164 (DOCK_IN) status -16
<3>[ 4.392572] DOCK_IN GPIO164 request fault!-16
<6>[ 4.397032] gpio_dock_in_irq_init: request irq = 388, ret = 0
<6>[ 4.402963] tegra_ehci_probe- #####
<6>[ 4.406706] usbcore: registered new interface driver cdc_acm
<6>[ 4.412555] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[ 4.421217] usbcore: registered new interface driver cdc_wdm
<6>[ 4.427047] Initializing USB Mass Storage driver...
<6>[ 4.432104] usbcore: registered new interface driver usb-storage
<6>[ 4.438280] USB Mass Storage support registered.
<6>[ 4.443065] usbcore: registered new interface driver libusual
<6>[ 4.449076] usbcore: registered new interface driver usbserial
<6>[ 4.455047] USB Serial support registered for generic
<6>[ 4.460309] usbcore: registered new interface driver usbserial_generic
<6>[ 4.466942] usbserial: USB Serial Driver core
<6>[ 4.471507] USB Serial support registered for GSM modem (1-port)
<6>[ 4.477694] usbcore: registered new interface driver option
<5>[ 4.483451] asuspec: [asuspec_chip_init] Model Name: ASUS-TF201-PAD
<6>[ 4.489824] option: v0.7.2:USB Driver for GSM modems
<6>[ 4.495003] USB Serial support registered for pl2303
<5>[ 4.500061] asuspec: [asuspec_chip_init] EC-FW Version: PAD-EC20T-0216
<6>[ 4.506796] usbcore: registered new interface driver pl2303
<6>[ 4.512475] pl2303: Prolific PL2303 USB to serial adaptor driver
<6>[ 4.518682] USB Serial support registered for Qualcomm USB modem
<6>[ 4.524851] usbcore: registered new interface driver qcserial
<5>[ 4.530777] asuspec: [asuspec_chip_init] PCBA Version: TF201-PAD-SKU1
<6>[ 4.537302] NVidia Tegra High-Speed USB SOC Device Controller driver (Apr 20, 2007)
<7>[ 4.545135] gpio_request: gpio-164 (DOCK_IN) status -16
<3>[ 4.550533] DOCK_IN GPIO164 request fault!-16
<5>[ 4.554986] asuspec: [asuspec_enter_normal_mode] Entering normal mode
<6>[ 4.561601] gpio_limit_set1_irq_init: request irq = 285, ret = 0
<6>[ 4.567805] fsl_udc_probe()
<5>[ 4.570710] asuspec: [asuspec_work_function] 0x1 0x0 0xff 0xff
<6>[ 4.576805] phy->instance= 0 , phy->xcvr_setup_value=61
<3>[ 4.582298] fsl-tegra-udc fsl-tegra-udc: can't get charge regulator,err:-19
<6>[ 4.589463] tegra-otg tegra-otg: SUSPEND --> PERIPHERAL
<6>[ 4.594779] fsl_vbus_session, vbus_active=0, is_active=1
<6>[ 4.600360] android init
<3>[ 4.603191] pid != TF300TG, cancel acm ports
<3>[ 4.607535] pid != TF300TL, cancel serial ports
<4>[ 4.612572] Gadget Android: controller 'fsl-tegra-udc' not recognized
<6>[ 4.619088] android_usb gadget: android_usb ready
<6>[ 4.623965] fsl-tegra-udc: bind to driver android_usb
<7>[ 4.629214] gpio_set_debounce: gpio-168 status -22
<6>[ 4.634166] Wake24 for irq=392
<6>[ 4.637457] input: gpio-keys as /devices/platform/gpio-keys.0/input/input1
<6>[ 4.644481] gpio_keys: Reported pressed KEY_POWER
<6>[ 4.649266] gpio_keys: Released KEY_POWER
<6>[ 4.700842] Wake17 for irq=117
<6>[ 4.704170] input: tegra-kbc as /devices/platform/tegra-kbc/input/input2
<6>[ 4.711106] usbcore: registered new interface driver xpad
<6>[ 4.716647] mxt_init+ #####
<6>[ 4.719570] mxt_init- #####
<6>[ 4.722457] [elan] elan_ktf3k_ts_init
<6>[ 4.726269] elan-ktf3k 1-0010: [ELAN] Start HW reset!
<6>[ 4.790679] cable_detection_work_handler, vbus_active=0, is_active=1
<6>[ 4.797104] The USB cable is connected (0.5A)
<4>[ 4.810673] ========================================================
<4>[ 4.817096] battery_callback usb_cable_state =1
<4>[ 4.840670] ========================================================
<4>[ 4.847092] battery_callback battery driver not ready
<4>[ 4.852297] Touch charger state: 1
<7>[ 5.017939] [elan] GPIO_TP_INT_N=60
<6>[ 5.021511] elan-ktf3k 1-0010: The boot code is new!
<6>[ 5.767576] elan-ktf3k 1-0010: [elan] __hello_packet_handler: hello packet 55:55:55:55
<6>[ 5.775646] elan-ktf3k 1-0010: [elan] hello packet's rc = 0
<6>[ 5.970678] mpu_delay_init+ #####
<6>[ 5.974093] mpu_probe+ #####
<6>[ 5.977123] i2c i2c-2: mpu_probe: 0
<6>[ 5.991065] elan-ktf3k 1-0010: [elan] __fw_packet_handler: firmware version: 0x7053
<6>[ 5.999224] elan-ktf3k 1-0010: [elan] __fw_packet_handler: X resolution: 0x0000
<6>[ 6.006627] kxtf9_mod_delay_init+ #####
<6>[ 6.010970] elan-ktf3k 1-0010: [elan] __fw_packet_handler: Y resolution: 0x0000
<6>[ 6.018703] elan-ktf3k 1-0010: [elan] __fw_packet_handler: firmware id: 0x3024
<6>[ 6.026114] ami306_mod_delay_init+ #####
<6>[ 6.030183] elan-ktf3k 1-0010: [Elan] Max X=2944, Max Y=1856
<6>[ 6.036162] input: elan-touchscreen as /devices/virtual/input/input3
<4>[ 6.042776] /proc/ektf_dbg created
<6>[ 6.046622] elan-ktf3k 1-0010: [elan] Start touchscreen elan-touchscreen in interrupt mode
<4>[ 6.055070] [ELAN]misc_register finished!!
<6>[ 6.059171] elan-ktf3k 1-0010: Update power source to 2
<6>[ 6.067290] i2c i2c-2: Installing irq using 409
<6>[ 6.071923] i2c i2c-2: Module Param interface = mpuirq
<6>[ 6.077306] mpu_probe- #####
<6>[ 6.080288] i2c i2c-2: kxtf9_mod_probe: kxtf9
<6>[ 6.084809] i2c i2c-2: inv_mpu_register_slave: +kxtf9 Type 1: Addr: f IRQ: 341, Adapt: 2
<6>[ 6.093196] mpu_delay_init: Probe name mpu3050
<6>[ 6.097781] mpu_delay_init- #####
<6>[ 6.101185] kxtf9_init+ #####
<6>[ 6.112940] rtc_tps6591x rtc_tps6591x.0: RTC Time : 1/20/2000 15:38:11
<6>[ 6.120682] kxtf9_init- #####
<6>[ 6.123744] tps6591x 4-002d:
<6>[ 6.123747] getting alarm time::
<6>[ 6.130241] rtc_tps6591x rtc_tps6591x.0: RTC Time : 1/1/1900 0:0:0
<6>[ 6.136506] i2c i2c-2: Installing accelirq irq using 341
<6>[ 6.141972] Wake0 for irq=341
<6>[ 6.145131] i2c i2c-2: ami306_mod_probe: ami306
<6>[ 6.149742] i2c i2c-2: inv_mpu_register_slave: +ami306 Type 2: Addr: e IRQ: 400, Adapt: 2
<6>[ 6.158302] kxtf9_mod_delay_init: Probe name kxtf9_mod
<6>[ 6.163549] ami306_init+ #####
<6>[ 6.168698] rtc_tps6591x rtc_tps6591x.0: RTC Time : 1/20/2000 15:38:11
<6>[ 6.175537] using rtc device, rtc_tps6591x, for alarms
<6>[ 6.180661] rtc_tps6591x rtc_tps6591x.0: rtc core: registered rtc_tps6591x as rtc0
<6>[ 6.191722] rtc_tps6591x rtc_tps6591x.0: RTC Time : 1/20/2000 15:38:11
<6>[ 6.320823] i2c /dev entries driver
<6>[ 6.324749] Linux video capture interface: v2.00
<6>[ 6.329590] usbcore: registered new interface driver uvcvideo
<6>[ 6.335437] USB Video Class driver (v1.0.0)
<6>[ 6.339867] trpc_sema_init: registered misc dev 10:44
<6>[ 6.345900] trpc_node_register: Adding 'local' to node list
<6>[ 6.353611] nvavp nvavp: allocated IOVM at ff00000 for AVP os
<6>[ 6.359722] tegra_camera tegra_camera: tegra_camera_probe
<6>[ 6.365729] yuv fjm6mo sensor_init+ #####
<6>[ 6.659354] ami306_init- #####
<6>[ 6.662509] i2c i2c-2: Installing compassirq irq using 400
<6>[ 6.668289] yuv sensor_probe, compiled at Sep 14 2012 09:15:13
<4>[ 6.674272] yuv_sensor_power_on+
<6>[ 6.677584] gpio 143 set to 0
<6>[ 6.680756] ami306_mod_delay_init: Probe name ami306_mod
<6>[ 6.686140] ami306_mod_delay_init- #####
<7>[ 6.690154] gpio_request: gpio-143 (isp_power_1v2_en) status -16
<3>[ 6.696240] yuv_sensor_power_on_TF700T: gpio_request failed for gpio TF700T_ISP_POWER_1V2_EN_GPIO
<6>[ 6.705259] gpio 143 set to 1
<6>[ 6.708302] gpio 223 set to 0
<6>[ 6.711356] gpio 223 set to 1
<4>[ 6.731210] camera mclock on
<4>[ 6.734189] -tegra_camera_mclk_on_off
<6>[ 6.737922] gpio 216 set to 0
<6>[ 6.740976] gpio 216 set to 1
<4>[ 6.744089] yuv_sensor_power_on -
<6>[ 6.763793] fjm6mo check version number 0xb03400 1
<4>[ 6.768653] yuv_sensor_power_off+
<6>[ 6.772127] gpio 216 set to 0
<4>[ 6.775172] -tegra_camera_mclk_on_off
<6>[ 6.779054] gpio 223 set to 0
<6>[ 6.782181] gpio 143 set to 0
<4>[ 6.785218] yuv_sensor_power_off-
<6>[ 6.788647] yuv fjm6mo sensor_init- #####
<6>[ 6.792742] sensor_init+ #####
<6>[ 6.795965] yuv sensor_probe
<6>[ 6.799055] sensor_init- #####
<4>[ 6.802225] pad_probe: client->addr=b
<4>[ 6.806201] pad_get_psp: pad_device->battery_present=0
<3>[ 6.811427] pad-battery 4-000b: pad_get_psp: i2c read for 7 failed
<3>[ 6.817748] power_supply battery: driver failed to report `status' property
<4>[ 6.824821] pad_get_psp: pad_device->battery_present=0
<3>[ 6.830104] pad-battery 4-000b: pad_get_psp: i2c read for 7 failed
<6>[ 6.836560] pad-battery 4-000b: pad-battery: battery driver registered
<3>[ 6.843260] power_supply battery: driver failed to report `status' property
<6>[ 6.850394] Wake26 for irq=373
<6>[ 6.853654] The USB cable status = 1
<4>[ 6.857334] setup_irq: battery_present =1
<6>[ 6.861693] Wake25 for irq=372
<6>[ 6.864921] Wake25 for irq=372
<6>[ 6.868047] Enabling wake25
<4>[ 6.870921] setup_low_battery_irq:low_battery_present=0
<6>[ 6.876446] battery register misc device for I2C stress test rc=0
<4>[ 6.882663] i2c-core: driver [pad-battery] using legacy suspend method
<4>[ 6.889332] i2c-core: driver [pad-battery] using legacy resume method
<6>[ 6.895936] al3010_init+ #####
<4>[ 6.899064] light sensor info : al3010 init
<4>[ 6.903530] light sensor info : al3010 probe successed
<6>[ 6.908735] al3010 2-001c: driver version 1.0 enabled
<4>[ 6.914089] i2c-core: driver [al3010] using legacy suspend method
<4>[ 6.920253] i2c-core: driver [al3010] using legacy resume method
<6>[ 6.926438] al3010_init- #####
<6>[ 6.929657] device-mapper: uevent: version 1.0.3
<6>[ 6.934484] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
<6>[ 6.943020] Bluetooth: HCI UART driver ver 2.2
<6>[ 6.947611] Bluetooth: HCI H4 protocol initialized
<6>[ 6.952481] Bluetooth: HCILL protocol initialized
<6>[ 6.957257] Bluetooth: BlueSleep Mode Driver Ver 1.1
<6>[ 6.962371] bluesleep_init+ #####
<6>[ 6.965808] Wake7 for irq=390
<6>[ 6.968917] bluesleep_init- #####
<6>[ 6.972870] cpuidle: using governor ladder
<6>[ 6.977303] cpuidle: using governor menu
<6>[ 6.981343] sdhci: Secure Digital Host Controller Interface driver
<6>[ 6.987662] sdhci: Copyright(c) Pierre Ossman
<6>[ 6.992094] sdhci_drv_init+ #####
<6>[ 6.995621] [mmc]:tegra_sdhci_pltfm_init:914 mmc0: built_in 1
<6>[ 7.002232] sdhci sdhci-tegra.3: Error: tegra3 io dpd not supported for sdhci-tegra.3
<4>[ 7.011219] mmc0: Invalid maximum block size, assuming 512 bytes
<6>[ 7.017315] mmc0: no vmmc regulator found
<4>[ 7.021484] ========================================================
<6>[ 7.021588] tegra_usb_suspend+
<6>[ 7.021594] tegra->phy->instance=2
<6>[ 7.021599] tegra_usb_suspend: before ehci_halt
<6>[ 7.021606] tegra_usb_suspend: after ehci_halt, ret = 0
<6>[ 7.021625] tegra_usb_suspend-
<6>[ 7.050945] [mmc]:mmc_detect_change:1394 mmc0: gpio_69:0
<6>[ 7.056331] [mmc]:mmc_schedule_delayed_work:88 mmc0: delay 0
<6>[ 7.062156] mmc0: SDHCI controller on platform [sdhci-tegra.3] using ADMA
<6>[ 7.062167] [mmc]:mmc_rescan:1812 mmc0: gpio_69:0 rescan_disable 0
<4>[ 7.063289] docking_callback 1 docking_in =0 pu4=1
<4>[ 7.063294] ========================================================
<4>[ 7.063301] disable_irq(gpio_to_irq(TEGRA_GPIO_PS5)
<5>[ 7.063309] asusdec: [asusdec_pad_battery_report_function] dock_in = 0, ret_val = 0
<6>[ 7.099621] sdhci sdhci-tegra.2: Error: tegra3 io dpd not supported for sdhci-tegra.2
<4>[ 7.111980] mmc1: Invalid maximum block size, assuming 512 bytes
<6>[ 7.118087] mmc1: no vmmc regulator found
<4>[ 7.128944] mmc1 clock request: 101KHz. currently 48000KHz
<4>[ 7.139558] mmc1 clock request: 0KHz. currently 48000KHz
<6>[ 7.145039] [mmc]:mmc_detect_change:1394 mmc1: gpio_69:0
<6>[ 7.150422] [mmc]:mmc_schedule_delayed_work:88 mmc1: delay 0
<6>[ 7.156239] mmc1: SDHCI controller on platform [sdhci-tegra.2] using ADMA
<6>[ 7.156250] [mmc]:mmc_rescan:1812 mmc1: gpio_69:0 rescan_disable 0
<4>[ 7.157313] mmc1 clock request: 101KHz. currently 48000KHz
<4>[ 7.157330] mmc1 clock request: 0KHz. currently 48000KHz
<4>[ 7.170713] mmc1 clock request: 400KHz. currently 48000KHz
<6>[ 7.188085] Wake23 for irq=293
<6>[ 7.199411] Wake23 for irq=293
<6>[ 7.202540] Enabling wake23
<6>[ 7.205404] gpio bank wake found: wake23 for irq=66
<6>[ 7.210421] Enabling wake23
<6>[ 7.219353] [mmc]:tegra_sdhci_pltfm_init:869 mmc2: non-built_in 0
<6>[ 7.242402] [mmc]:mmc_decode_cid:111 cid.prv 0x6f
<6>[ 7.245879] sdhci sdhci-tegra.0: Error: tegra3 io dpd not supported for sdhci-tegra.0
<4>[ 7.246898] mmc2: Invalid maximum block size, assuming 512 bytes
<6>[ 7.246921] mmc2: no vmmc regulator found
<6>[ 7.247999] [mmc]:mmc_power_off:1242 mmc2:vdd_slot_reg: use_count 1
<6>[ 7.248007] [mmc]:mmc_power_off:1245 mmc2:vdd_io_reg: use_count 0
<6>[ 7.250232] [mmc]:mmc_detect_change:1394 mmc2: gpio_69:0
<6>[ 7.250239] [mmc]:mmc_schedule_delayed_work:88 mmc2: delay 0
<6>[ 7.250263] mmc2: SDHCI controller on platform [sdhci-tegra.0] using ADMA
<6>[ 7.250313] sdhci_drv_init- #####
<6>[ 7.251694] tegra-se tegra-se: tegra_se_probe: complete
<6>[ 7.252042] usbcore: registered new interface driver usbhid
<6>[ 7.252047] usbhid: USB HID core driver
<6>[ 7.252316] logger: created 256K log 'log_main'
<6>[ 7.252372] logger: created 256K log 'log_events'
<6>[ 7.252436] logger: created 256K log 'log_radio'
<6>[ 7.252494] logger: created 256K log 'log_system'
<6>[ 7.252633] RIL: [ril_init] RIL init
<3>[ 7.252640] RIL: [ril_init] Ril driver doesn't support this project
<4>[ 7.303421] mmc1 clock request: 0KHz. currently 48000KHz
<4>[ 7.304483] mmc1 clock request: 101KHz. currently 48000KHz
<4>[ 7.304499] mmc1 clock request: 0KHz. currently 48000KHz
<4>[ 7.320716] mmc1 clock request: 300KHz. currently 48000KHz
<6>[ 7.376947] [mmc]:mmc_read_ext_csd:259 ext_csd.sectors 0x3b34000 prod_name HYNIX BOOT_SIZE_MULTI 0x10
<4>[ 7.385331] mmc1 clock request: 0KHz. currently 48000KHz
<4>[ 7.386393] mmc1 clock request: 101KHz. currently 48000KHz
<4>[ 7.386412] mmc1 clock request: 0KHz. currently 48000KHz
<4>[ 7.400717] mmc1 clock request: 200KHz. currently 48000KHz
<4>[ 7.431478] mmc0: switch to bus width 1 ddr 0 failed
<3>[ 7.437548] mmc0: error -110 whilst initialising MMC card
<4>[ 7.485362] mmc1 clock request: 0KHz. currently 48000KHz
<4>[ 7.490840] mmc1 clock request: 101KHz. currently 48000KHz
<4>[ 7.498505] mmc1 clock request: 0KHz. currently 48000KHz
<4>[ 7.530738] mmc1 clock request: 101KHz. currently 48000KHz
<6>[ 7.574598] [mmc]:mmc_decode_cid:111 cid.prv 0x6f
<6>[ 7.605782] [mmc]:mmc_read_ext_csd:259 ext_csd.sectors 0x3b34000 prod_name HYNIX BOOT_SIZE_MULTI 0x10
<4>[ 7.618292] mmc1 clock request: 0KHz. currently 48000KHz
<6>[ 7.623699] [mmc]:mmc_rescan:1897 mmc1: extend_wakelock 0
<4>[ 7.648918] mmc0: switch to bus width 1 ddr 0 failed
<3>[ 7.655010] mmc0: error -110 whilst initialising MMC card
<6>[ 7.763997] [mmc]:mmc_decode_cid:111 cid.prv 0x6f
<6>[ 7.791113] [mmc]:mmc_read_ext_csd:259 ext_csd.sectors 0x3b34000 prod_name HYNIX BOOT_SIZE_MULTI 0x10
<4>[ 7.820391] mmc0: switch to bus width 1 ddr 0 failed
<3>[ 7.825463] mmc0: error -110 whilst initialising MMC card
<6>[ 7.851038] rt5631_modinit+ #####
<4>[ 7.854426] codec_3v3_power_switch_init
<7>[ 7.858335] gpio_request: gpio-120 (rt5631_3v3_power_control) status -16
<4>[ 7.865258] rt5631_3v3_power_control: request rt5631_3v3_power_control fail! : -16
<4>[ 7.873006] rt5631_i2c_probe+
<6>[ 7.876039] RT5631 Audio Codec 0.01 alsa 1.0.24
<4>[ 7.880763] rt5631_i2c_probe-
<6>[ 7.885966] rt5631_modinit- #####
<6>[ 7.895412] tegra_rt5631_modinit+ #####
<4>[ 7.901370] tegra_rt5631_modinit(): support codec rt5631
<4>[ 7.908875] tegra_rt5631_driver_probe+
<6>[ 7.977245] [mmc]:mmc_decode_cid:111 cid.prv 0x6f
<6>[ 8.006198] RT5631 initial ok!
<4>[ 8.009390] ************************realtek_ce_init_hwdep*************************************
<4>[ 8.018387] tegra_rt5631_init+
<3>[ 8.021977] rt5631 4-001a: asoc: failed to add dapm kcontrol AXO2MIX Mixer OUTVOLL Playback Switch: -16
<6>[ 8.031555] [mmc]:mmc_read_ext_csd:259 ext_csd.sectors 0x3b34000 prod_name HYNIX BOOT_SIZE_MULTI 0x10
<6>[ 8.047398] asoc: rt5631-hifi <-> tegra30-i2s.1 mapping ok
<6>[ 8.053672] asoc: dit-hifi <-> tegra30-spdif mapping ok
<4>[ 8.075286] mmc0: switch to bus width 1 ddr 0 failed
<3>[ 8.080416] mmc0: error -110 whilst initialising MMC card
<4>[ 8.086351] tegra_rt5631_driver_probe-
<6>[ 8.090290] tegra_rt5631_modinit- #####
<6>[ 8.094216] tegra_wm8903_modinit+ #####
<4>[ 8.098124] tegra_wm8903_modinit(): not support codec wm8903
<6>[ 8.106040] [mmc]:mmc_rescan:1897 mmc0: extend_wakelock 0
<6>[ 8.111527] [mmc]:mmc_rescan:1812 mmc2: gpio_69:0 rescan_disable 0
<6>[ 8.118922] headset_init+ #####
<4>[ 8.122150] HEADSET: Headset detection init
<4>[ 8.126556] HEADSET: Headset detection mode
<6>[ 8.130902] [mmc]:mmc_power_up:1194 mmc2:vdd_io_reg: use_count 0
<6>[ 8.136977] [mmc]:mmc_power_up:1197 mmc2:vdd_slot_reg: use_count 0
<4>[ 8.143308] HEADSET: Config Headset Button detection gpio
<7>[ 8.148776] gpio_request: gpio-186 (btn_INT) status -16
<4>[ 8.154196] HEADSET: Config Jack-in detection gpio
<4>[ 8.159337] HEADSET: Turn on micbias power
<6>[ 8.164461] Wake12 for irq=402
<6>[ 8.167672] Wake12 for irq=402
<6>[ 8.170798] Enabling wake12
<6>[ 8.173665] gpio bank wake found: wake12 for irq=119
<6>[ 8.178768] Enabling wake12
<4>[ 8.210202] HEADSET: Turn off micbias power
<4>[ 8.215869] HEADSET: Config LineOut detection gpio
<6>[ 8.222887] headset_init- #####
<6>[ 8.226124] fm34_init+ #####
<6>[ 8.229098] fm34_init()
<6>[ 8.231859] fm34: [fm34_chip_init] GPIO = 115 , state = 1
<6>[ 8.237332] fm34: [fm34_chip_init] GPIO = 222 , state = 1
<4>[ 8.381684] mmc2: host does not support reading read-only switch. assuming write-enable.
<6>[ 8.391975] mmc2: new high speed SD card at address 1234
<6>[ 8.397792] mmcblk0: mmc2:1234 SA02G 1.85 GiB
<6>[ 8.402593] fm34_probe()
<6>[ 8.405247] fm34_init- #####
<6>[ 8.408274] ALSA device list:
<6>[ 8.411348] fm34: [fm34_reconfig] ReConfigure DSP
<6>[ 8.416262] #0: HDA NVIDIA Tegra at 0x70038000 irq 113
<6>[ 8.421732] #1: tegra-codec
<6>[ 8.425025] oprofile: using arm/armv7-ca9
<6>[ 8.429224] GACT probability NOT on
<6>[ 8.432894] fm34: [fm34_reset_DSP] GPIO = 115 , state = 0
<6>[ 8.438366] fm34: [fm34_reset_DSP] GPIO = 115 , state = 1
<6>[ 8.444028] Mirror/redirect action on
<6>[ 8.447803] u32 classifier
<6>[ 8.450831] Actions configured
<6>[ 8.454349] Netfilter messages via NETLINK v0.30.
<6>[ 8.459281] mmcblk0: p1
<6>[ 8.462265] [mmc]:mmc_rescan_try_freq:1790 mmc2: SD completed
<6>[ 8.468163] [mmc]:mmc_rescan:1897 mmc2: extend_wakelock 1
<6>[ 8.473719] nf_conntrack version 0.5.0 (15611 buckets, 62444 max)
<6>[ 8.480262] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[ 8.487322] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 8.493467] xt_time: kernel timezone is -0000
<6>[ 8.498066] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 8.503691] arp_tables: (C) 2002 David S. Miller
<6>[ 8.508429] TCP cubic registered
<6>[ 8.511845] NET: Registered protocol family 10
<6>[ 8.517359] Mobile IPv6
<6>[ 8.519907] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 8.525406] IPv6 over IPv4 tunneling driver
<6>[ 8.530619] NET: Registered protocol family 17
<6>[ 8.535179] NET: Registered protocol family 15
<6>[ 8.539806] Bluetooth: RFCOMM TTY layer initialized
<6>[ 8.544847] Bluetooth: RFCOMM socket layer initialized
<6>[ 8.550056] Bluetooth: RFCOMM ver 1.11
<6>[ 8.554026] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 8.559411] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 8.565618] NET: Registered protocol family 37
<6>[ 8.570135] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
<5>[ 8.578087] Registering SWP/SWPB emulation handler
<6>[ 8.583243] fm34: [fm34_config_DSP] DSP ACK, read 0xc0: 1
<6>[ 8.588875] fm34: [fm34_config_DSP] Load TF201 DSP parameters
<4>[ 8.602196] Disabling clocks left on by bootloader:
<4>[ 8.607231] uarta
<4>[ 8.609506] fuse_burn
<4>[ 8.612210] cclk_lp
<4>[ 8.614649] pll_x_out0
<4>[ 8.617352] pll_d2_out0
<4>[ 8.620211] pll_p_out2
<4>[ 8.622924] pll_c_out1
<4>[ 8.625623] pll_m_out1
<6>[ 8.628422] CPU rate: 1150 MHz
<4>[ 8.632514] tegra3_dvfs: minimum cap.cbus rate 247000000 requires 1000 mV
<4>[ 8.639264] tegra3_dvfs: minimum cap.emc rate 400000000 requires 1000 mV
<6>[ 8.646242] tegra dvfs: tegra sysfs cap interface is initialized
<6>[ 8.652798] tegra_actmon.emc: Completed initialization (0)
<6>[ 8.658697] tegra_actmon.avp: Completed initialization (0)
<4>[ 8.665547] [DHD] ## wifi_probe
<4>[ 8.668841] [DHD] wifi_set_power = 1
<6>[ 8.790679] fm34: [fm34_config_DSP] config_length = 1497
<6>[ 8.796085] fm34: [fm34_config_DSP] DSP configuration is done
<4>[ 8.940685] tegra_watchdog_touch
<4>[ 8.944478] nct1008_get_temp: ret temp=27C
<4>[ 8.948923] Reg Status Reg 0x02 Value 0x80
<4>[ 8.954644] Reg Configuration Reg 0x03 Value 0x04
<4>[ 8.977295] [DHD] wifi_set_carddetect = 1
<6>[ 8.981487] [mmc]:mmc_detect_change:1394 mmc1: gpio_69:0
<6>[ 8.986867] [mmc]:mmc_schedule_delayed_work:88 mmc1: delay 0
<6>[ 8.992721] [mmc]:mmc_rescan:1812 mmc1: gpio_69:0 rescan_disable 0
<4>[ 8.992797] [DHD]
<4>[ 8.992800] Dongle Host Driver, version 5.90.125.94.1
<4>[ 8.992803] Compiled in drivers/net/wireless/bcmdhd on Sep 14 2012 at 09:15:57
<4>[ 9.014703] mmc1 clock request: 101KHz. currently 48000KHz
<4>[ 9.020296] mmc1 clock request: 0KHz. currently 48000KHz
<4>[ 9.040711] mmc1 clock request: 400KHz. currently 48000KHz
<4>[ 9.072807] mmc1 clock request: 50000KHz. currently 48000KHz
<6>[ 9.080855] mmc1: new high speed SDIO card at address 0001
<4>[ 9.087203] [DHD] bcmdhd: fw_path: /system/vendor/firmware/bcm4330/fw_bcmdhd.bin nvram_path: /system/etc/nvram_4330.txt
<4>[ 9.098272] [DHD] F1 signature read @0x18000000=0x16044330
<4>[ 9.104077] [DHD] sih->chiprev = 4
<4>[ 9.107618] [DHD] BCM4330B2 found!
<4>[ 9.114670] [DHD] DHD: dongle ram size is set to 294912(orig 294912)
<4>[ 9.121768] wl_create_event_handler thr:66 started
<4>[ 9.126832] dhd_attach thr:67 started
<4>[ 9.130631] dhd_attach thr:68 started
<4>[ 9.134545] dhd_attach thr:69 started
<4>[ 9.138992] [DHD] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
<4>[ 9.148044] [DHD] wifi_set_power = 0
<6>[ 9.156147] [mmc]:mmc_rescan_try_freq:1785 mmc1: sdio completed
<6>[ 9.162231] [mmc]:mmc_rescan:1897 mmc1: extend_wakelock 1
<4>[ 9.452007] [DHD] =========== WLAN placed in RESET ========
<6>[ 9.460044] rtc_tps6591x rtc_tps6591x.0: RTC Time : 1/20/2000 15:38:14
<6>[ 9.466699] rtc_tps6591x rtc_tps6591x.0: setting system clock to 2000-01-20 15:38:14 UTC (948382694)
<6>[ 9.476450] Freeing init memory: 232K
<3>[ 9.483133] init: /init.rc: 40: invalid option ' disabled'
<4>[ 9.499157] pad_get_psp val->intval=Full ret=e0
<4>[ 9.516425] pad_get_psp voltage_now =8222
<4>[ 9.523117] pad_get_capacity val->intval=100 ret=100
<4>[ 9.530984] pad_get_psp batttery temperature=214
<3>[ 9.538905] power_supply dock_battery: driver failed to report `status' property
<5>[ 10.537066] asuspec: [asuspec_enter_s3_work_function] EC in S3
<6>[ 12.070678] charger_pad_dock_detection:0 dock_in_value=1 charger_pad_dock_value =0
<5>[ 12.270718] asuspec: [asuspec_send_ec_req] send EC_Request
<4>[ 12.276358] battery_status_poll 120 1
<5>[ 12.344354] asuspec: [asuspec_work_function] 0x2 0x81 0x50 0xff
<5>[ 12.350417] asuspec: [asuspec_smi] ASUSPEC_SMI_HANDSHAKING
<4>[ 12.543902] pad_get_psp val->intval=Full ret=e0
<4>[ 12.561136] pad_get_psp voltage_now =8236
<4>[ 12.568054] pad_get_capacity val->intval=100 ret=100
<4>[ 12.576090] pad_get_psp batttery temperature=214
<5>[ 13.577972] asuspec: [asuspec_enter_s3_work_function] EC in S3
<4>[ 13.960684] tegra_watchdog_touch
<4>[ 13.964553] nct1008_get_temp: ret temp=27C
<4>[ 13.969061] Reg Status Reg 0x02 Value 0x80
<4>[ 13.974726] Reg Configuration Reg 0x03 Value 0x04
<3>[ 14.015807] init: Unable to open persistent property directory /data/property errno: 2
<3>[ 14.026231] android_usb: already disabled
<6>[ 14.029719] warning: `adbd' uses 32-bit capabilities (legacy support in use)
<6>[ 14.029857] adb_open(adbd)
<6>[ 14.040886] adb_bind_config
<3>[ 14.041028] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
<6>[ 14.041331] adb_bind_config
<6>[ 14.041375] adb_release
<6>[ 14.042658] adb_open(adbd)
<4>[ 14.077748] Check cardhu_panel_disable in TF202
<6>[ 14.186501] android_work: did not send uevent (0 0 (null))
<4>[ 14.201093] Disp: diff_msec= 123
<6>[ 14.343013] android_work: sent uevent USB_STATE=CONNECTED
<6>[ 14.346658] android_work: sent uevent USB_STATE=DISCONNECTED
<6>[ 14.544938] android_work: sent uevent USB_STATE=CONNECTED
<4>[ 15.090773] Check cardhu_panel_enable
<4>[ 15.090782] Check panel is panasonic
<4>[ 15.120686] Check power on/off for bridge IC
<4>[ 15.120693] Check enable TF301_1.8V
<4>[ 15.130708] Check enable TF301_I2C_Switch
<4>[ 15.140724] Check enable TF301_OSC
<4>[ 15.161105] Check tegra_dc_rgb_enable
<4>[ 15.161111] Check set polarity
<4>[ 15.161815] Check Chip ID=44
<4>[ 15.161819] Check RevID=0
<6>[ 15.161824] DISPLAY_write_table display_write_table
<4>[ 15.235429] ========================
<4>[ 15.235434] ========================
<4>[ 15.235439] Check start to read register
<4>[ 15.235444] Panel is panasonic
<6>[ 15.919934] set_config : usb set config wake lock ++
<6>[ 15.925263] android_usb gadget: high speed config #1: android
<6>[ 15.931323] android_work: sent uevent USB_STATE=CONFIGURED
<4>[ 18.980699] tegra_watchdog_touch
<4>[ 18.984603] nct1008_get_temp: ret temp=27C
<4>[ 18.989046] Reg Status Reg 0x02 Value 0x80
<4>[ 18.994716] Reg Configuration Reg 0x03 Value 0x04
<4>[ 20.275711] adbd (124): /proc/124/oom_adj is deprecated, please use /proc/124/oom_score_adj instead.
<4>[ 24.000697] tegra_watchdog_touch
<4>[ 24.004523] nct1008_get_temp: ret temp=27C
<4>[ 24.008970] Reg Status Reg 0x02 Value 0x80
<4>[ 24.014715] Reg Configuration Reg 0x03 Value 0x04
<4>[ 29.020714] tegra_watchdog_touch
<4>[ 29.024695] nct1008_get_temp: ret temp=27C
<4>[ 29.029142] Reg Status Reg 0x02 Value 0x80
<4>[ 29.034817] Reg Configuration Reg 0x03 Value 0x04
<4>[ 34.040701] tegra_watchdog_touch
<4>[ 34.044545] nct1008_get_temp: ret temp=27C
<4>[ 34.048991] Reg Status Reg 0x02 Value 0x80
<4>[ 34.054678] Reg Configuration Reg 0x03 Value 0x04
<4>[ 39.060694] tegra_watchdog_touch
<4>[ 39.064593] nct1008_get_temp: ret temp=27C
<4>[ 39.069044] Reg Status Reg 0x02 Value 0x80
<4>[ 39.074788] Reg Configuration Reg 0x03 Value 0x04
<4>[ 44.080698] tegra_watchdog_touch
<4>[ 44.084517] nct1008_get_temp: ret temp=28C
<4>[ 44.089027] Reg Status Reg 0x02 Value 0x80
<4>[ 44.094696] Reg Configuration Reg 0x03 Value 0x04
<4>[ 49.100696] tegra_watchdog_touch
<4>[ 49.104519] nct1008_get_temp: ret temp=28C
<4>[ 49.108954] Reg Status Reg 0x02 Value 0x80
<4>[ 49.114720] Reg Configuration Reg 0x03 Value 0x04
<4>[ 54.120690] tegra_watchdog_touch
<4>[ 54.124585] nct1008_get_temp: ret temp=28C
<4>[ 54.129018] Reg Status Reg 0x02 Value 0x00
<4>[ 54.134709] Reg Configuration Reg 0x03 Value 0x04
<4>[ 59.140691] tegra_watchdog_touch
<4>[ 59.144511] nct1008_get_temp: ret temp=28C
<4>[ 59.149021] Reg Status Reg 0x02 Value 0x80
<4>[ 59.154710] Reg Configuration Reg 0x03 Value 0x04
<4>[ 64.160705] tegra_watchdog_touch
<4>[ 64.164619] nct1008_get_temp: ret temp=28C
<4>[ 64.169057] Reg Status Reg 0x02 Value 0x80
<4>[ 64.174818] Reg Configuration Reg 0x03 Value 0x04
<4>[ 69.180702] tegra_watchdog_touch
<4>[ 69.184526] nct1008_get_temp: ret temp=28C
<4>[ 69.189034] Reg Status Reg 0x02 Value 0x00
<4>[ 69.194725] Reg Configuration Reg 0x03 Value 0x04
<4>[ 74.200693] tegra_watchdog_touch
<4>[ 74.204512] nct1008_get_temp: ret temp=28C
<4>[ 74.208948] Reg Status Reg 0x02 Value 0x80
<4>[ 74.214709] Reg Configuration Reg 0x03 Value 0x04
<4>[ 79.220694] tegra_watchdog_touch
<4>[ 79.224584] nct1008_get_temp: ret temp=28C
<4>[ 79.229018] Reg Status Reg 0x02 Value 0x80
<4>[ 79.234689] Reg Configuration Reg 0x03 Value 0x04
<4>[ 84.240690] tegra_watchdog_touch
<4>[ 84.244515] nct1008_get_temp: ret temp=28C
<4>[ 84.249021] Reg Status Reg 0x02 Value 0x80
<4>[ 84.254689] Reg Configuration Reg 0x03 Value 0x04
<4>[ 89.260686] tegra_watchdog_touch
<4>[ 89.264638] nct1008_get_temp: ret temp=28C
<4>[ 89.269080] Reg Status Reg 0x02 Value 0x80
<4>[ 89.274819] Reg Configuration Reg 0x03 Value 0x04
<4>[ 94.280705] tegra_watchdog_touch
<4>[ 94.284546] nct1008_get_temp: ret temp=28C
<4>[ 94.289055] Reg Status Reg 0x02 Value 0x80
<4>[ 94.294723] Reg Configuration Reg 0x03 Value 0x04
<4>[ 99.300695] tegra_watchdog_touch
<4>[ 99.304530] nct1008_get_temp: ret temp=28C
<4>[ 99.308965] Reg Status Reg 0x02 Value 0x80
<4>[ 99.314703] Reg Configuration Reg 0x03 Value 0x04
<4>[ 104.320698] tegra_watchdog_touch
<4>[ 104.324600] nct1008_get_temp: ret temp=29C
<4>[ 104.329036] Reg Status Reg 0x02 Value 0x80
<4>[ 104.334707] Reg Configuration Reg 0x03 Value 0x04
<4>[ 109.340700] tegra_watchdog_touch
<4>[ 109.344527] nct1008_get_temp: ret temp=29C
<4>[ 109.349033] Reg Status Reg 0x02 Value 0x80
<4>[ 109.354699] Reg Configuration Reg 0x03 Value 0x04
<4>[ 114.360693] tegra_watchdog_touch
<4>[ 114.364599] nct1008_get_temp: ret temp=29C
<4>[ 114.369034] Reg Status Reg 0x02 Value 0x00
<4>[ 114.374777] Reg Configuration Reg 0x03 Value 0x04
<4>[ 119.380693] tegra_watchdog_touch
<4>[ 119.384509] nct1008_get_temp: ret temp=29C
<4>[ 119.389021] Reg Status Reg 0x02 Value 0x80
<4>[ 119.394693] Reg Configuration Reg 0x03 Value 0x04
<4>[ 124.400916] tegra_watchdog_touch
<4>[ 124.404853] nct1008_get_temp: ret temp=29C
<4>[ 124.409357] Reg Status Reg 0x02 Value 0x80
<4>[ 124.415093] Reg Configuration Reg 0x03 Value 0x04
<4>[ 129.420692] tegra_watchdog_touch
<4>[ 129.424584] nct1008_get_temp: ret temp=29C
<4>[ 129.429032] Reg Status Reg 0x02 Value 0x80
<4>[ 129.434704] Reg Configuration Reg 0x03 Value 0x04
<5>[ 132.330755] asuspec: [asuspec_send_ec_req] send EC_Request
<4>[ 132.336326] battery_status_poll 120 1
<5>[ 132.401897] asuspec: [asuspec_work_function] 0x2 0x81 0x50 0xff
<5>[ 132.407886] asuspec: [asuspec_smi] ASUSPEC_SMI_HANDSHAKING
<4>[ 132.603893] pad_get_psp val->intval=Full ret=e0
<4>[ 132.622667] pad_get_psp voltage_now =8221
<4>[ 132.629409] pad_get_capacity val->intval=100 ret=99
<4>[ 132.637320] pad_get_psp batttery temperature=226
<5>[ 133.636430] asuspec: [asuspec_enter_s3_work_function] EC in S3
<4>[ 134.440693] tegra_watchdog_touch
<4>[ 134.444513] nct1008_get_temp: ret temp=29C
<4>[ 134.448960] Reg Status Reg 0x02 Value 0x80
<4>[ 134.454703] Reg Configuration Reg 0x03 Value 0x04
<4>[ 139.460690] tegra_watchdog_touch
<4>[ 139.464642] nct1008_get_temp: ret temp=29C
<4>[ 139.469104] Reg Status Reg 0x02 Value 0x00
<4>[ 139.474843] Reg Configuration Reg 0x03 Value 0x04
<4>[ 144.480690] tegra_watchdog_touch
<4>[ 144.484514] nct1008_get_temp: ret temp=29C
<4>[ 144.489019] Reg Status Reg 0x02 Value 0x80
<4>[ 144.494693] Reg Configuration Reg 0x03 Value 0x04
<4>[ 149.500692] tegra_watchdog_touch
<4>[ 149.504510] nct1008_get_temp: ret temp=29C
<4>[ 149.508946] Reg Status Reg 0x02 Value 0x80
<4>[ 149.514703] Reg Configuration Reg 0x03 Value 0x04
<4>[ 154.520687] tegra_watchdog_touch
<4>[ 154.524617] nct1008_get_temp: ret temp=29C
<4>[ 154.529051] Reg Status Reg 0x02 Value 0x80
<4>[ 154.534736] Reg Configuration Reg 0x03 Value 0x04
<4>[ 159.540702] tegra_watchdog_touch
<4>[ 159.544536] nct1008_get_temp: ret temp=29C
<4>[ 159.548974] Reg Status Reg 0x02 Value 0x80
<4>[ 159.554740] Reg Configuration Reg 0x03 Value 0x04
<4>[ 164.560693] tegra_watchdog_touch
<4>[ 164.564581] nct1008_get_temp: ret temp=29C
<4>[ 164.569015] Reg Status Reg 0x02 Value 0x00
<4>[ 164.574779] Reg Configuration Reg 0x03 Value 0x04
<4>[ 169.580688] tegra_watchdog_touch
<4>[ 169.584549] nct1008_get_temp: ret temp=29C
<4>[ 169.589057] Reg Status Reg 0x02 Value 0x80
<4>[ 169.594742] Reg Configuration Reg 0x03 Value 0x04
<4>[ 174.600693] tegra_watchdog_touch
<4>[ 174.604512] nct1008_get_temp: ret temp=29C
<4>[ 174.608946] Reg Status Reg 0x02 Value 0x00
<4>[ 174.614712] Reg Configuration Reg 0x03 Value 0x04
<4>[ 179.620693] tegra_watchdog_touch
<4>[ 179.624583] nct1008_get_temp: ret temp=29C
<4>[ 179.629018] Reg Status Reg 0x02 Value 0x80
<4>[ 179.634682] Reg Configuration Reg 0x03 Value 0x04
<4>[ 184.640687] tegra_watchdog_touch
<4>[ 184.644574] nct1008_get_temp: ret temp=29C
<4>[ 184.649017] Reg Status Reg 0x02 Value 0x80
<4>[ 184.654760] Reg Configuration Reg 0x03 Value 0x04
<4>[ 189.660701] tegra_watchdog_touch
<4>[ 189.664592] nct1008_get_temp: ret temp=29C
<4>[ 189.669027] Reg Status Reg 0x02 Value 0x80
<4>[ 189.674773] Reg Configuration Reg 0x03 Value 0x04
<4>[ 194.680693] tegra_watchdog_touch
<4>[ 194.684510] nct1008_get_temp: ret temp=29C
<4>[ 194.689016] Reg Status Reg 0x02 Value 0x80
<4>[ 194.694688] Reg Configuration Reg 0x03 Value 0x04
<4>[ 199.700689] tegra_watchdog_touch
<4>[ 199.704596] nct1008_get_temp: ret temp=29C
<4>[ 199.709039] Reg Status Reg 0x02 Value 0x80
<4>[ 199.714785] Reg Configuration Reg 0x03 Value 0x04
<4>[ 204.720696] tegra_watchdog_touch
<4>[ 204.724594] nct1008_get_temp: ret temp=30C
<4>[ 204.729030] Reg Status Reg 0x02 Value 0x80
<4>[ 204.734696] Reg Configuration Reg 0x03 Value 0x04
<4>[ 209.740695] tegra_watchdog_touch
<4>[ 209.744521] nct1008_get_temp: ret temp=30C
<4>[ 209.748956] Reg Status Reg 0x02 Value 0x80
<4>[ 209.754701] Reg Configuration Reg 0x03 Value 0x04
<4>[ 214.760691] tegra_watchdog_touch
<4>[ 214.764675] nct1008_get_temp: ret temp=30C
<4>[ 214.769116] Reg Status Reg 0x02 Value 0x80
<4>[ 214.774855] Reg Configuration Reg 0x03 Value 0x04
<4>[ 219.780703] tegra_watchdog_touch
<4>[ 219.784523] nct1008_get_temp: ret temp=30C
<4>[ 219.789035] Reg Status Reg 0x02 Value 0x80
<4>[ 219.794703] Reg Configuration Reg 0x03 Value 0x04
<4>[ 224.800693] tegra_watchdog_touch
<4>[ 224.804508] nct1008_get_temp: ret temp=30C
<4>[ 224.808950] Reg Status Reg 0x02 Value 0x80
<4>[ 224.814694] Reg Configuration Reg 0x03 Value 0x04
<4>[ 229.820764] tegra_watchdog_touch
<4>[ 229.824698] nct1008_get_temp: ret temp=30C
<4>[ 229.829153] Reg Status Reg 0x02 Value 0x00
<4>[ 229.834818] Reg Configuration Reg 0x03 Value 0x04
<4>[ 234.840698] tegra_watchdog_touch
<4>[ 234.844517] nct1008_get_temp: ret temp=30C
<4>[ 234.848962] Reg Status Reg 0x02 Value 0x80
<4>[ 234.854635] Reg Configuration Reg 0x03 Value 0x04
<4>[ 239.860691] tegra_watchdog_touch
<4>[ 239.864580] nct1008_get_temp: ret temp=30C
<4>[ 239.869023] Reg Status Reg 0x02 Value 0x00
<4>[ 239.874766] Reg Configuration Reg 0x03 Value 0x04
<3>[ 240.640722] INFO: task kinteractiveup:81 blocked for more than 120 seconds.
<3>[ 240.647828] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
<6>[ 240.655736] kinteractiveup D c0571c3c 0 81 2 0x00000000
<4>[ 240.662465] [<c0571c3c>] (schedule+0x87c/0x958) from [<c00a480c>] (kthread+0x64/0x84)
<4>[ 240.670481] [<c00a480c>] (kthread+0x64/0x84) from [<c00482b8>] (kernel_thread_exit+0x0/0x8)
_that said:
Also try this:
Code:
adb shell hexdump -C -s 0x380000 -n 8 /dev/block/mmcblk0
and tell me if it outputs "ANDROID!" (after some hexadecimal numbers).
Click to expand...
Click to collapse
No, it only outputs:
*
00380000

Could someone test cm-10.1 ?

If I upload cm-10.1 would someone test it?
Unjustified Dev said:
If I upload cm-10.1 would someone test it?
Click to expand...
Click to collapse
I will be brave and test it. (was actually going to try and build it myself soon)
chevyowner said:
I will be brave and test it. (was actually going to try and build it myself soon)
Click to expand...
Click to collapse
Thanks about 6 hours no rest trying to figure out which blobs matter , constantly comparing nvidia tablets, and finally getting it to build.
I'm running a fresh build now I already built it like 5 times already
This only makes me want this device more:laugh:
Here is my source
device - https://github.com/Project-Shield/android_device_nvidia_roth
vendor- https://github.com/Project-Shield/proprietarty_vendor_nvidia_roth
kernel- https://github.com/Project-Shield/android_kernel_nvidia_roth
I got the kernel from another source you can see where I forked it.
The libs I weren't to sure on but I started from the nexus 7 list and added more
I will put up a guide soon I did exclude nvidia/device/common and drivers/sensors from my github im going to integrate it into one tree instead of separate folders.
@chevyowner Here it is I really hope it boots http://goo.im/devs/Unjust/Roth/cm-10.1-20130809-UNOFFICIAL-roth.zip
Downloading now, I hope my internet does not decide it hates me again while downloading.
chevyowner said:
Downloading now, I hope my internet does not decide it hates me again while downloading.
Click to expand...
Click to collapse
Thanks I really appreciate it idc if it doesnt boot but at least start up to get a logcat if possible but im sure you want it to start up
error 7 flashing, looking to see if it is something I did.
chevyowner said:
error 7 flashing, looking to see if it is something I did.
Click to expand...
Click to collapse
Weird it used device specific partitions in cwm after it fails go to advanced and then show log
That did not help me so I looked and agrabren called shield thor not roth after changing roth to thor in the updater script it flashed. It won't boot tho.
I can't get logcat working.
chevyowner said:
That did not help me so I looked and agrabren called shield thor not roth after changing roth to thor in the updater script it flashed. It won't boot tho.
I can't get logcat working.
Click to expand...
Click to collapse
Does it at least boot or is a black screen by boot I mean at least show the bootanimation ?
Hangs at the nvidia shield screen. I found my usbview.exe and Windows thinks nothing is plugged in. (except for my xbox360 controller and keyboard)
chevyowner said:
Hangs at the nvidia shield screen. I found my usbview.exe and Windows thinks nothing is plugged in. (except for my xbox360 controller and keyboard)
Click to expand...
Click to collapse
In recovery type su then adb shell cat proc/last_kmsg ot adb shell cat proc_kmsg could you post them
Most likely i am missing a blob thats the only reason I can see it staying at the bootlogo
I did just fix the status 7 error
Night man sorry for wasting your time
The recovery does not have /proc/last_kmsg, I will try more when I think of it.
chevyowner said:
The recovery does not have /proc/last_kmsg, I will try more when I think of it.
Click to expand...
Click to collapse
try cat proc/kmsg or adb shell dmesg thanks for this because as soon as booted I was going to kick this aside and start on 4.3
kmsg
Code:
sysfs_add_one+0x90/0xb0)
<4>[ 2.102778] [<c017f7fc>] (sysfs_add_one+0x90/0xb0) from [<c017fa54>] (create_dir+0x68/0xc4)
<4>[ 2.102904] [<c017fa54>] (create_dir+0x68/0xc4) from [<c017fdc0>] (sysfs_create_dir+0x6c/0xb0)
<4>[ 2.103123] [<c017fdc0>] (sysfs_create_dir+0x6c/0xb0) from [<c02796cc>] (kobject_add_internal+0xb0/0x278)
<4>[ 2.103359] [<c02796cc>] (kobject_add_internal+0xb0/0x278) from [<c0279ccc>] (kobject_add+0x4c/0x94)
<4>[ 2.103579] [<c0279ccc>] (kobject_add+0x4c/0x94) from [<c0279f34>] (kobject_create_and_add+0x28/0x64)
<4>[ 2.103798] [<c0279f34>] (kobject_create_and_add+0x28/0x64) from [<c03530f0>] (class_compat_register+0x40/0x70)
<4>[ 2.104021] [<c03530f0>] (class_compat_register+0x40/0x70) from [<c052bd4c>] (create_extcon_class+0x54/0x98)
<4>[ 2.104282] [<c052bd4c>] (create_extcon_class+0x54/0x98) from [<c0008674>] (do_one_initcall+0xa0/0x100)
<4>[ 2.104415] [<c0008674>] (do_one_initcall+0xa0/0x100) from [<c0a1b8e4>] (do_initcalls+0x78/0xac)
<4>[ 2.104630] [<c0a1b8e4>] (do_initcalls+0x78/0xac) from [<c0a1b9a8>] (kernel_init+0x90/0x128)
<4>[ 2.104847] [<c0a1b9a8>] (kernel_init+0x90/0x128) from [<c000f8b8>] (kernel_thread_exit+0x0/0x8)
<4>[ 2.105073] ---[ end trace 9d1c79c81885dc7d ]---
<4>[ 2.105207] ------------[ cut here ]------------
<4>[ 2.105329] WARNING: at /home/agrabren/android/roms/cm-10.1/kernel/nvidia/thor/lib/kobject.c:198 kobject_add_internal+0x20c/0x278()
<4>[ 2.105627] kobject_add_internal failed for switch with -EEXIST, don't try to register things with the same name in the same directory.
<4>[ 2.105833] Modules linked in:
<4>[ 2.106061] [<c00159d8>] (unwind_backtrace+0x0/0x140) from [<c006078c>] (warn_slowpath_common+0x54/0x6c)
<4>[ 2.106301] [<c006078c>] (warn_slowpath_common+0x54/0x6c) from [<c0060850>] (warn_slowpath_fmt+0x38/0x48)
<4>[ 2.106526] [<c0060850>] (warn_slowpath_fmt+0x38/0x48) from [<c0279828>] (kobject_add_internal+0x20c/0x278)
<4>[ 2.106662] [<c0279828>] (kobject_add_internal+0x20c/0x278) from [<c0279ccc>] (kobject_add+0x4c/0x94)
<4>[ 2.106888] [<c0279ccc>] (kobject_add+0x4c/0x94) from [<c0279f34>] (kobject_create_and_add+0x28/0x64)
<4>[ 2.107115] [<c0279f34>] (kobject_create_and_add+0x28/0x64) from [<c03530f0>] (class_compat_register+0x40/0x70)
<4>[ 2.107365] [<c03530f0>] (class_compat_register+0x40/0x70) from [<c052bd4c>] (create_extcon_class+0x54/0x98)
<4>[ 2.107589] [<c052bd4c>] (create_extcon_class+0x54/0x98) from [<c0008674>] (do_one_initcall+0xa0/0x100)
<4>[ 2.107809] [<c0008674>] (do_one_initcall+0xa0/0x100) from [<c0a1b8e4>] (do_initcalls+0x78/0xac)
<4>[ 2.107942] [<c0a1b8e4>] (do_initcalls+0x78/0xac) from [<c0a1b9a8>] (kernel_init+0x90/0x128)
<4>[ 2.108165] [<c0a1b9a8>] (kernel_init+0x90/0x128) from [<c000f8b8>] (kernel_thread_exit+0x0/0x8)
<4>[ 2.108397] ---[ end trace 9d1c79c81885dc7e ]---
<4>[ 2.108517] kobject_create_and_add: kobject_add error: -17
<4>[ 2.108728] ------------[ cut here ]------------
<4>[ 2.108856] WARNING: at /home/agrabren/android/roms/cm-10.1/kernel/nvidia/thor/drivers/extcon/extcon_class.c:545 create_extcon_class+0x78/0x98()
<4>[ 2.109071] cannot allocate
<4>[ 2.109291] Modules linked in:
<4>[ 2.109633] [<c00159d8>] (unwind_backtrace+0x0/0x140) from [<c006078c>] (warn_slowpath_common+0x54/0x6c)
<4>[ 2.109855] [<c006078c>] (warn_slowpath_common+0x54/0x6c) from [<c0060850>] (warn_slowpath_fmt+0x38/0x48)
<4>[ 2.110080] [<c0060850>] (warn_slowpath_fmt+0x38/0x48) from [<c052bd70>] (create_extcon_class+0x78/0x98)
<4>[ 2.110229] [<c052bd70>] (create_extcon_class+0x78/0x98) from [<c0008674>] (do_one_initcall+0xa0/0x100)
<4>[ 2.110366] [<c0008674>] (do_one_initcall+0xa0/0x100) from [<c0a1b8e4>] (do_initcalls+0x78/0xac)
<4>[ 2.110588] [<c0a1b8e4>] (do_initcalls+0x78/0xac) from [<c0a1b9a8>] (kernel_init+0x90/0x128)
<4>[ 2.110811] [<c0a1b9a8>] (kernel_init+0x90/0x128) from [<c000f8b8>] (kernel_thread_exit+0x0/0x8)
<4>[ 2.111024] ---[ end trace 9d1c79c81885dc7f ]---
<3>[ 2.117575] mmc0: Command timeout error, intmask: 10001
<3>[ 2.120177] mmc0: Command timeout error, intmask: 10001
<3>[ 2.128564] mmc0: Command timeout error, intmask: 10001
<3>[ 2.131053] mmc0: Command timeout error, intmask: 10001
<3>[ 2.133662] mmc0: Command timeout error, intmask: 10001
<3>[ 2.136144] mmc0: Command timeout error, intmask: 10001
<3>[ 2.138771] mmc0: Command timeout error, intmask: 10001
<3>[ 2.141261] mmc0: Command timeout error, intmask: 10001
<3>[ 2.143847] mmc0: Command timeout error, intmask: 10001
<3>[ 2.146357] mmc0: Command timeout error, intmask: 10001
<3>[ 2.148956] mmc0: Command timeout error, intmask: 10001
<6>[ 2.190251] usb 1-1: new full-speed USB device number 2 using tegra-ehci
<6>[ 2.194790] mmc0: new high speed DDR MMC card at address 0001
<6>[ 2.195114] mmcblk mmc0:0001: Card claimed for testing.
<6>[ 2.195597] mmcblk0: mmc0:0001 MAG2GA 14.5 GiB
<6>[ 2.195952] mmcblk0boot0: mmc0:0001 MAG2GA partition 1 2.00 MiB
<6>[ 2.196412] mmcblk0boot1: mmc0:0001 MAG2GA partition 2 2.00 MiB
<4>[ 2.198299] Primary GPT is invalid, using alternate GPT.
<6>[ 2.198573] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
<6>[ 2.201579] mmcblk0boot1: unknown partition table
<6>[ 2.202875] mmcblk0boot0: unknown partition table
<6>[ 2.209793] usbcore: registered new interface driver snd-usb-audio
<6>[ 2.217690] usb 1-1: New USB device found, idVendor=0955, idProduct=7203
<6>[ 2.217904] usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumbe
r=0
<6>[ 2.218111] usb 1-1: Product: NVIDIA Controller v01.01
<6>[ 2.218247] usb 1-1: Manufacturer: NVIDIA Corporation
<6>[ 2.224902] input: NVIDIA Corporation NVIDIA Controller v01.01 as /devices
/platform/tegra-ehci.2/usb1/1-1/1-1:1.0/input/input1
<6>[ 2.225520] generic-usb 0003:0955:7203.0001: input: USB HID v1.11 Gamepad
[NVIDIA Corporation NVIDIA Controller v01.01] on usb-tegra-ehci.2-1/input0
<3>[ 2.239328] mmc1: Command timeout error, intmask: 10001
<3>[ 2.241820] mmc1: Command timeout error, intmask: 10001
<3>[ 2.249889] mmc1: Command timeout error, intmask: 10001
<3>[ 2.252376] mmc1: Command timeout error, intmask: 10001
<3>[ 2.254944] mmc1: Command timeout error, intmask: 10001
<3>[ 2.257427] mmc1: Command timeout error, intmask: 10001
<6>[ 2.302518] mmc1: new high speed SDHC card at address 0001
<6>[ 2.302806] mmcblk mmc1:0001: Card claimed for testing.
<6>[ 2.303312] mmcblk1: mmc1:0001 00000 7.41 GiB
<6>[ 2.318663] mmcblk1: p1
<3>[ 2.354587] mmc2: Command timeout error, intmask: 10001
<3>[ 2.357165] mmc2: Command timeout error, intmask: 10001
<3>[ 2.365554] mmc2: Command timeout error, intmask: 10001
<3>[ 2.368131] mmc2: Command timeout error, intmask: 10001
<3>[ 2.370614] mmc2: Command timeout error, intmask: 10001
<3>[ 2.373095] mmc2: Command timeout error, intmask: 10001
<3>[ 2.375662] mmc2: Command timeout error, intmask: 10001
<3>[ 2.378148] mmc2: Command timeout error, intmask: 10001
<3>[ 2.380963] mmc2: Command timeout error, intmask: 10001
<3>[ 2.383450] mmc2: Command timeout error, intmask: 10001
<3>[ 2.386021] mmc2: Command timeout error, intmask: 10001
<3>[ 2.388537] mmc2: Command timeout error, intmask: 10001
<3>[ 2.427687] mmc2: Command timeout error, intmask: 10001
<3>[ 2.430285] mmc2: Command timeout error, intmask: 10001
<3>[ 2.438654] mmc2: Command timeout error, intmask: 10001
<3>[ 2.441249] mmc2: Command timeout error, intmask: 10001
<3>[ 2.443920] mmc2: Command timeout error, intmask: 10001
<3>[ 2.446509] mmc2: Command timeout error, intmask: 10001
<3>[ 2.449093] mmc2: Command timeout error, intmask: 10001
<3>[ 2.451769] mmc2: Command timeout error, intmask: 10001
<3>[ 2.454360] mmc2: Command timeout error, intmask: 10001
<3>[ 2.457035] mmc2: Command timeout error, intmask: 10001
<3>[ 2.459640] mmc2: Command timeout error, intmask: 10001
<3>[ 2.462330] mmc2: Command timeout error, intmask: 10001
<3>[ 2.501891] mmc2: Command timeout error, intmask: 10001
<3>[ 2.504779] mmc2: Command timeout error, intmask: 10001
<3>[ 2.512863] mmc2: Command timeout error, intmask: 10001
<3>[ 2.515756] mmc2: Command timeout error, intmask: 10001
<3>[ 2.518550] mmc2: Command timeout error, intmask: 10001
<3>[ 2.521430] mmc2: Command timeout error, intmask: 10001
<3>[ 2.524219] mmc2: Command timeout error, intmask: 10001
<3>[ 2.527015] mmc2: Command timeout error, intmask: 10001
<3>[ 2.529899] mmc2: Command timeout error, intmask: 10001
<3>[ 2.532698] mmc2: Command timeout error, intmask: 10001
<3>[ 2.535582] mmc2: Command timeout error, intmask: 10001
<3>[ 2.538387] mmc2: Command timeout error, intmask: 10001
<3>[ 2.578506] mmc2: Command timeout error, intmask: 10001
<3>[ 2.582152] mmc2: Command timeout error, intmask: 10001
<3>[ 2.591476] mmc2: Command timeout error, intmask: 10001
<3>[ 2.594885] mmc2: Command timeout error, intmask: 10001
<3>[ 2.598374] mmc2: Command timeout error, intmask: 10001
<3>[ 2.601774] mmc2: Command timeout error, intmask: 10001
<3>[ 2.605174] mmc2: Command timeout error, intmask: 10001
<3>[ 2.608584] mmc2: Command timeout error, intmask: 10001
<3>[ 2.611994] mmc2: Command timeout error, intmask: 10001
<3>[ 2.615523] mmc2: Command timeout error, intmask: 10001
<3>[ 2.618933] mmc2: Command timeout error, intmask: 10001
<3>[ 2.622461] mmc2: Command timeout error, intmask: 10001
<6>[ 3.016385] tegra-snd-rt5640 tegra-snd-rt5640.0: No speaker regulator found
<6>[ 3.169518] gpio wake49 for gpio=143
<6>[ 3.170052] asoc: rt5640-aif1 <-> tegra30-i2s.1 mapping ok
<6>[ 3.170833] asoc: dit-hifi <-> tegra30-spdif mapping ok
<6>[ 3.171298] asoc: dit-hifi <-> tegra30-i2s.3 mapping ok
<6>[ 3.173150] input: tegra-rt5640 Headphone Jack as /devices/platform/tegra-snd-rt5640.0/sound/card1/input2
<6>[ 3.174472] oprofile: using timer interrupt.
<6>[ 3.174990] GACT probability NOT on
<6>[ 3.175109] Mirror/redirect action on
<6>[ 3.175244] u32 classifier
<6>[ 3.175441] Actions configured
<6>[ 3.175554] Netfilter messages via NETLINK v0.30.
<6>[ 3.175733] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
<6>[ 3.176456] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[ 3.176846] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 3.177183] xt_time: kernel timezone is -0000
<6>[ 3.177749] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 3.178186] arp_tables: (C) 2002 David S. Miller
<6>[ 3.178385] TCP: cubic registered
<6>[ 3.178949] NET: Registered protocol family 10
<6>[ 3.180174] Mobile IPv6
<6>[ 3.180352] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 3.180944] IPv6 over IPv4 tunneling driver
<6>[ 3.182282] NET: Registered protocol family 17
<6>[ 3.182420] NET: Registered protocol family 15
<6>[ 3.182626] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 3.183027] NET: Registered protocol family 35
<6>[ 3.183459] NET: Registered protocol family 37
<6>[ 3.183575] NET: Registered protocol family 40
<6>[ 3.185990] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
<5>[ 3.186283] Registering SWP/SWPB emulation handler
<4>[ 3.209333] Disabling clocks left on by bootloader:
<4>[ 3.209454] xusb_hs_src
<4>[ 3.209573] audio_2x
<4>[ 3.209776] audio4_2x
<4>[ 3.209888] audio3_2x
<4>[ 3.210001] audio2_2x
<4>[ 3.210115] audio1_2x
<4>[ 3.210245] audio0_2x
<4>[ 3.210448] audio
<4>[ 3.210558] audio4
<4>[ 3.210839] audio3
<4>[ 3.210949] audio2
<4>[ 3.211058] audio1
<4>[ 3.211270] audio0
<4>[ 3.211458] dsi2-fixed
<4>[ 3.211569] dsi1-fixed
<4>[ 3.211694] uarta_dbg
<4>[ 3.211812] uarta
<4>[ 3.212015] mipi-cal-fixed
<4>[ 3.212125] mipi-cal
<4>[ 3.212258] bsev
<4>[ 3.212390] fuse_burn
<4>[ 3.212511] cclk_lp
<4>[ 3.212624] pll_x_out0
<4>[ 3.212903] pll_u_12M
<4>[ 3.213019] pll_u_60M
<4>[ 3.213135] pll_d2_out0
<4>[ 3.213351] pll_p_out3
<4>[ 3.213469] pll_c_out1
<4>[ 3.213583] pll_m_out1
<6>[ 3.213706] DVFS: Got RTC device name:rtc0
<6>[ 3.215035] palmas-rtc palmas-rtc.3: palmas_rtc_read_time() 113 7 9 4 23 56
<4>[ 3.215506] tegra_dvfs: vdd_cpu: stats above 1390 mV will be squashed
<4>[ 3.216260] tegra_dvfs: vdd_core: stats above 1390 mV will be squashed
<6>[ 3.224846] Tegra CPU DFLL is initialized
<6>[ 3.225222] CPU rate: 613 MHz
<6>[ 3.227088] cpu_dfll cooling device is registered
<6>[ 3.446327] tegra dvfs: tegra sysfs cap interface is initialized
<6>[ 3.446556] tegra dvfs: tegra sysfs floor interface is initialized
<6>[ 3.449424] Core EDP sysfs interface is initialized
<6>[ 3.450850] tegra_actmon.emc: Completed initialization (0)
<6>[ 3.451182] tegra_actmon.avp: Completed initialization (0)
<6>[ 3.453394] vi vi: vi_probe: ++
<6>[ 3.453495] vi vi: tegra_camera_register: ++
<6>[ 3.454851] vi vi: initialized
<4>[ 3.456464] palmas_regen2: incomplete constraints, leaving on
<4>[ 3.458176] palmas_smps12: incomplete constraints, leaving on
<6>[ 3.458964] gpio wake51 for gpio=128
<6>[ 3.459260] gpio wake23 for gpio=69
<6>[ 3.459400] gpio wake27 for gpio=144
<6>[ 3.459793] input: gpio-keys as /devices/platform/gpio-keys.0/input/input3
<6>[ 3.461122] palmas-rtc palmas-rtc.3: palmas_rtc_read_time() 113 7 9 4 23 56
<6>[ 3.461340] palmas-rtc palmas-rtc.3: setting system clock to 2013-08-09 04:23:56 UTC (1376022236)
<6>[ 3.461756] ALSA device list:
<6>[ 3.461852] #0: HDA NVIDIA Tegra at 0x70038000 irq 113
<6>[ 3.462022] #1: tegra-rt5640
<4>[ 3.462159] Warning: unable to open an initial console.
<3>[ 3.465118] init: could not import file '/init.recovery.roth.rc' from '/init.rc'
<3>[ 3.556839] android_usb: already disabled
<3>[ 3.557462] init: Unable to open persistent property directory /data/property errno: 2
<4>[ 3.602852] tegradc tegradc.0: DC doesn't stop at end of frame.
<4>[ 3.856850] tegradc tegradc.0: DC doesn't stop at end of frame.
<3>[ 3.857389] tegradc tegradc.0: DSI pad calibration done
<6>[ 4.463805] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts:
<6>[ 4.610329] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts:
<3>[ 4.616236] android_usb: already disabled
<6>[ 4.618169] adb_open
<6>[ 4.618314] adb_bind_config
<6>[ 4.621974] tegra-udc tegra-udc.0: detected SDP port
<6>[ 4.622095] bq2419x 0-006b: Setting charging current 2
<6>[ 4.729226] android_work: did not send uevent (0 0 (null))
<6>[ 4.765740] android_work: sent uevent USB_STATE=CONNECTED
<6>[ 4.769283] android_work: sent uevent USB_STATE=DISCONNECTED
<6>[ 4.823241] bq2419x 0-006b: Charging enabled
<6>[ 4.849696] android_work: sent uevent USB_STATE=CONNECTED
<6>[ 4.984224] tegra-udc tegra-udc.0: detected SDP port
<6>[ 4.984350] bq2419x 0-006b: Setting charging current 2
<6>[ 5.124263] android_work: sent uevent USB_STATE=DISCONNECTED
<6>[ 5.161733] android_work: sent uevent USB_STATE=CONNECTED
<6>[ 5.165407] android_work: sent uevent USB_STATE=DISCONNECTED
<6>[ 5.185224] bq2419x 0-006b: Charging enabled
<6>[ 5.245744] android_work: sent uevent USB_STATE=CONNECTED
<6>[ 5.252164] android_usb gadget: high-speed config #1: android
<6>[ 5.252511] tegra-udc tegra-udc.0: detected SDP port
<6>[ 5.252832] bq2419x 0-006b: Setting charging current 500
<6>[ 5.253009] android_work: sent uevent USB_STATE=CONFIGURED
<6>[ 5.453226] bq2419x 0-006b: Charging enabled
<4>[ 15.267828] adbd (170): /proc/170/oom_adj is deprecated, please use /proc/170/oom_score_adj instead.
<6>[ 26.198292] bq2419x 0-006b: bq2419x_reset_wdt() from THREAD()
chevyowner said:
kmsg
Code:
sysfs_add_one+0x90/0xb0)
<4>[ 2.102778] [<c017f7fc>] (sysfs_add_one+0x90/0xb0) from [<c017fa54>] (create_dir+0x68/0xc4)
<4>[ 2.102904] [<c017fa54>] (create_dir+0x68/0xc4) from [<c017fdc0>] (sysfs_create_dir+0x6c/0xb0)
<4>[ 2.103123] [<c017fdc0>] (sysfs_create_dir+0x6c/0xb0) from [<c02796cc>] (kobject_add_internal+0xb0/0x278)
<4>[ 2.103359] [<c02796cc>] (kobject_add_internal+0xb0/0x278) from [<c0279ccc>] (kobject_add+0x4c/0x94)
<4>[ 2.103579] [<c0279ccc>] (kobject_add+0x4c/0x94) from [<c0279f34>] (kobject_create_and_add+0x28/0x64)
<4>[ 2.103798] [<c0279f34>] (kobject_create_and_add+0x28/0x64) from [<c03530f0>] (class_compat_register+0x40/0x70)
<4>[ 2.104021] [<c03530f0>] (class_compat_register+0x40/0x70) from [<c052bd4c>] (create_extcon_class+0x54/0x98)
<4>[ 2.104282] [<c052bd4c>] (create_extcon_class+0x54/0x98) from [<c0008674>] (do_one_initcall+0xa0/0x100)
<4>[ 2.104415] [<c0008674>] (do_one_initcall+0xa0/0x100) from [<c0a1b8e4>] (do_initcalls+0x78/0xac)
<4>[ 2.104630] [<c0a1b8e4>] (do_initcalls+0x78/0xac) from [<c0a1b9a8>] (kernel_init+0x90/0x128)
<4>[ 2.104847] [<c0a1b9a8>] (kernel_init+0x90/0x128) from [<c000f8b8>] (kernel_thread_exit+0x0/0x8)
<4>[ 2.105073] ---[ end trace 9d1c79c81885dc7d ]---
<4>[ 2.105207] ------------[ cut here ]------------
<4>[ 2.105329] WARNING: at /home/agrabren/android/roms/cm-10.1/kernel/nvidia/thor/lib/kobject.c:198 kobject_add_internal+0x20c/0x278()
<4>[ 2.105627] kobject_add_internal failed for switch with -EEXIST, don't try to register things with the same name in the same directory.
<4>[ 2.105833] Modules linked in:
<4>[ 2.106061] [<c00159d8>] (unwind_backtrace+0x0/0x140) from [<c006078c>] (warn_slowpath_common+0x54/0x6c)
<4>[ 2.106301] [<c006078c>] (warn_slowpath_common+0x54/0x6c) from [<c0060850>] (warn_slowpath_fmt+0x38/0x48)
<4>[ 2.106526] [<c0060850>] (warn_slowpath_fmt+0x38/0x48) from [<c0279828>] (kobject_add_internal+0x20c/0x278)
<4>[ 2.106662] [<c0279828>] (kobject_add_internal+0x20c/0x278) from [<c0279ccc>] (kobject_add+0x4c/0x94)
<4>[ 2.106888] [<c0279ccc>] (kobject_add+0x4c/0x94) from [<c0279f34>] (kobject_create_and_add+0x28/0x64)
<4>[ 2.107115] [<c0279f34>] (kobject_create_and_add+0x28/0x64) from [<c03530f0>] (class_compat_register+0x40/0x70)
<4>[ 2.107365] [<c03530f0>] (class_compat_register+0x40/0x70) from [<c052bd4c>] (create_extcon_class+0x54/0x98)
<4>[ 2.107589] [<c052bd4c>] (create_extcon_class+0x54/0x98) from [<c0008674>] (do_one_initcall+0xa0/0x100)
<4>[ 2.107809] [<c0008674>] (do_one_initcall+0xa0/0x100) from [<c0a1b8e4>] (do_initcalls+0x78/0xac)
<4>[ 2.107942] [<c0a1b8e4>] (do_initcalls+0x78/0xac) from [<c0a1b9a8>] (kernel_init+0x90/0x128)
<4>[ 2.108165] [<c0a1b9a8>] (kernel_init+0x90/0x128) from [<c000f8b8>] (kernel_thread_exit+0x0/0x8)
<4>[ 2.108397] ---[ end trace 9d1c79c81885dc7e ]---
<4>[ 2.108517] kobject_create_and_add: kobject_add error: -17
<4>[ 2.108728] ------------[ cut here ]------------
<4>[ 2.108856] WARNING: at /home/agrabren/android/roms/cm-10.1/kernel/nvidia/thor/drivers/extcon/extcon_class.c:545 create_extcon_class+0x78/0x98()
<4>[ 2.109071] cannot allocate
<4>[ 2.109291] Modules linked in:
<4>[ 2.109633] [<c00159d8>] (unwind_backtrace+0x0/0x140) from [<c006078c>] (warn_slowpath_common+0x54/0x6c)
<4>[ 2.109855] [<c006078c>] (warn_slowpath_common+0x54/0x6c) from [<c0060850>] (warn_slowpath_fmt+0x38/0x48)
<4>[ 2.110080] [<c0060850>] (warn_slowpath_fmt+0x38/0x48) from [<c052bd70>] (create_extcon_class+0x78/0x98)
<4>[ 2.110229] [<c052bd70>] (create_extcon_class+0x78/0x98) from [<c0008674>] (do_one_initcall+0xa0/0x100)
<4>[ 2.110366] [<c0008674>] (do_one_initcall+0xa0/0x100) from [<c0a1b8e4>] (do_initcalls+0x78/0xac)
<4>[ 2.110588] [<c0a1b8e4>] (do_initcalls+0x78/0xac) from [<c0a1b9a8>] (kernel_init+0x90/0x128)
<4>[ 2.110811] [<c0a1b9a8>] (kernel_init+0x90/0x128) from [<c000f8b8>] (kernel_thread_exit+0x0/0x8)
<4>[ 2.111024] ---[ end trace 9d1c79c81885dc7f ]---
<3>[ 2.117575] mmc0: Command timeout error, intmask: 10001
<3>[ 2.120177] mmc0: Command timeout error, intmask: 10001
<3>[ 2.128564] mmc0: Command timeout error, intmask: 10001
<3>[ 2.131053] mmc0: Command timeout error, intmask: 10001
<3>[ 2.133662] mmc0: Command timeout error, intmask: 10001
<3>[ 2.136144] mmc0: Command timeout error, intmask: 10001
<3>[ 2.138771] mmc0: Command timeout error, intmask: 10001
<3>[ 2.141261] mmc0: Command timeout error, intmask: 10001
<3>[ 2.143847] mmc0: Command timeout error, intmask: 10001
<3>[ 2.146357] mmc0: Command timeout error, intmask: 10001
<3>[ 2.148956] mmc0: Command timeout error, intmask: 10001
<6>[ 2.190251] usb 1-1: new full-speed USB device number 2 using tegra-ehci
<6>[ 2.194790] mmc0: new high speed DDR MMC card at address 0001
<6>[ 2.195114] mmcblk mmc0:0001: Card claimed for testing.
<6>[ 2.195597] mmcblk0: mmc0:0001 MAG2GA 14.5 GiB
<6>[ 2.195952] mmcblk0boot0: mmc0:0001 MAG2GA partition 1 2.00 MiB
<6>[ 2.196412] mmcblk0boot1: mmc0:0001 MAG2GA partition 2 2.00 MiB
<4>[ 2.198299] Primary GPT is invalid, using alternate GPT.
<6>[ 2.198573] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
<6>[ 2.201579] mmcblk0boot1: unknown partition table
<6>[ 2.202875] mmcblk0boot0: unknown partition table
<6>[ 2.209793] usbcore: registered new interface driver snd-usb-audio
<6>[ 2.217690] usb 1-1: New USB device found, idVendor=0955, idProduct=7203
<6>[ 2.217904] usb 1-1: New USB device strings: Mfr=2, Product=1, SerialNumbe
r=0
<6>[ 2.218111] usb 1-1: Product: NVIDIA Controller v01.01
<6>[ 2.218247] usb 1-1: Manufacturer: NVIDIA Corporation
<6>[ 2.224902] input: NVIDIA Corporation NVIDIA Controller v01.01 as /devices
/platform/tegra-ehci.2/usb1/1-1/1-1:1.0/input/input1
<6>[ 2.225520] generic-usb 0003:0955:7203.0001: input: USB HID v1.11 Gamepad
[NVIDIA Corporation NVIDIA Controller v01.01] on usb-tegra-ehci.2-1/input0
<3>[ 2.239328] mmc1: Command timeout error, intmask: 10001
<3>[ 2.241820] mmc1: Command timeout error, intmask: 10001
<3>[ 2.249889] mmc1: Command timeout error, intmask: 10001
<3>[ 2.252376] mmc1: Command timeout error, intmask: 10001
<3>[ 2.254944] mmc1: Command timeout error, intmask: 10001
<3>[ 2.257427] mmc1: Command timeout error, intmask: 10001
<6>[ 2.302518] mmc1: new high speed SDHC card at address 0001
<6>[ 2.302806] mmcblk mmc1:0001: Card claimed for testing.
<6>[ 2.303312] mmcblk1: mmc1:0001 00000 7.41 GiB
<6>[ 2.318663] mmcblk1: p1
<3>[ 2.354587] mmc2: Command timeout error, intmask: 10001
<3>[ 2.357165] mmc2: Command timeout error, intmask: 10001
<3>[ 2.365554] mmc2: Command timeout error, intmask: 10001
<3>[ 2.368131] mmc2: Command timeout error, intmask: 10001
<3>[ 2.370614] mmc2: Command timeout error, intmask: 10001
<3>[ 2.373095] mmc2: Command timeout error, intmask: 10001
<3>[ 2.375662] mmc2: Command timeout error, intmask: 10001
<3>[ 2.378148] mmc2: Command timeout error, intmask: 10001
<3>[ 2.380963] mmc2: Command timeout error, intmask: 10001
<3>[ 2.383450] mmc2: Command timeout error, intmask: 10001
<3>[ 2.386021] mmc2: Command timeout error, intmask: 10001
<3>[ 2.388537] mmc2: Command timeout error, intmask: 10001
<3>[ 2.427687] mmc2: Command timeout error, intmask: 10001
<3>[ 2.430285] mmc2: Command timeout error, intmask: 10001
<3>[ 2.438654] mmc2: Command timeout error, intmask: 10001
<3>[ 2.441249] mmc2: Command timeout error, intmask: 10001
<3>[ 2.443920] mmc2: Command timeout error, intmask: 10001
<3>[ 2.446509] mmc2: Command timeout error, intmask: 10001
<3>[ 2.449093] mmc2: Command timeout error, intmask: 10001
<3>[ 2.451769] mmc2: Command timeout error, intmask: 10001
<3>[ 2.454360] mmc2: Command timeout error, intmask: 10001
<3>[ 2.457035] mmc2: Command timeout error, intmask: 10001
<3>[ 2.459640] mmc2: Command timeout error, intmask: 10001
<3>[ 2.462330] mmc2: Command timeout error, intmask: 10001
<3>[ 2.501891] mmc2: Command timeout error, intmask: 10001
<3>[ 2.504779] mmc2: Command timeout error, intmask: 10001
<3>[ 2.512863] mmc2: Command timeout error, intmask: 10001
<3>[ 2.515756] mmc2: Command timeout error, intmask: 10001
<3>[ 2.518550] mmc2: Command timeout error, intmask: 10001
<3>[ 2.521430] mmc2: Command timeout error, intmask: 10001
<3>[ 2.524219] mmc2: Command timeout error, intmask: 10001
<3>[ 2.527015] mmc2: Command timeout error, intmask: 10001
<3>[ 2.529899] mmc2: Command timeout error, intmask: 10001
<3>[ 2.532698] mmc2: Command timeout error, intmask: 10001
<3>[ 2.535582] mmc2: Command timeout error, intmask: 10001
<3>[ 2.538387] mmc2: Command timeout error, intmask: 10001
<3>[ 2.578506] mmc2: Command timeout error, intmask: 10001
<3>[ 2.582152] mmc2: Command timeout error, intmask: 10001
<3>[ 2.591476] mmc2: Command timeout error, intmask: 10001
<3>[ 2.594885] mmc2: Command timeout error, intmask: 10001
<3>[ 2.598374] mmc2: Command timeout error, intmask: 10001
<3>[ 2.601774] mmc2: Command timeout error, intmask: 10001
<3>[ 2.605174] mmc2: Command timeout error, intmask: 10001
<3>[ 2.608584] mmc2: Command timeout error, intmask: 10001
<3>[ 2.611994] mmc2: Command timeout error, intmask: 10001
<3>[ 2.615523] mmc2: Command timeout error, intmask: 10001
<3>[ 2.618933] mmc2: Command timeout error, intmask: 10001
<3>[ 2.622461] mmc2: Command timeout error, intmask: 10001
<6>[ 3.016385] tegra-snd-rt5640 tegra-snd-rt5640.0: No speaker regulator found
<6>[ 3.169518] gpio wake49 for gpio=143
<6>[ 3.170052] asoc: rt5640-aif1 <-> tegra30-i2s.1 mapping ok
<6>[ 3.170833] asoc: dit-hifi <-> tegra30-spdif mapping ok
<6>[ 3.171298] asoc: dit-hifi <-> tegra30-i2s.3 mapping ok
<6>[ 3.173150] input: tegra-rt5640 Headphone Jack as /devices/platform/tegra-snd-rt5640.0/sound/card1/input2
<6>[ 3.174472] oprofile: using timer interrupt.
<6>[ 3.174990] GACT probability NOT on
<6>[ 3.175109] Mirror/redirect action on
<6>[ 3.175244] u32 classifier
<6>[ 3.175441] Actions configured
<6>[ 3.175554] Netfilter messages via NETLINK v0.30.
<6>[ 3.175733] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
<6>[ 3.176456] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[ 3.176846] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[ 3.177183] xt_time: kernel timezone is -0000
<6>[ 3.177749] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 3.178186] arp_tables: (C) 2002 David S. Miller
<6>[ 3.178385] TCP: cubic registered
<6>[ 3.178949] NET: Registered protocol family 10
<6>[ 3.180174] Mobile IPv6
<6>[ 3.180352] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 3.180944] IPv6 over IPv4 tunneling driver
<6>[ 3.182282] NET: Registered protocol family 17
<6>[ 3.182420] NET: Registered protocol family 15
<6>[ 3.182626] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 3.183027] NET: Registered protocol family 35
<6>[ 3.183459] NET: Registered protocol family 37
<6>[ 3.183575] NET: Registered protocol family 40
<6>[ 3.185990] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
<5>[ 3.186283] Registering SWP/SWPB emulation handler
<4>[ 3.209333] Disabling clocks left on by bootloader:
<4>[ 3.209454] xusb_hs_src
<4>[ 3.209573] audio_2x
<4>[ 3.209776] audio4_2x
<4>[ 3.209888] audio3_2x
<4>[ 3.210001] audio2_2x
<4>[ 3.210115] audio1_2x
<4>[ 3.210245] audio0_2x
<4>[ 3.210448] audio
<4>[ 3.210558] audio4
<4>[ 3.210839] audio3
<4>[ 3.210949] audio2
<4>[ 3.211058] audio1
<4>[ 3.211270] audio0
<4>[ 3.211458] dsi2-fixed
<4>[ 3.211569] dsi1-fixed
<4>[ 3.211694] uarta_dbg
<4>[ 3.211812] uarta
<4>[ 3.212015] mipi-cal-fixed
<4>[ 3.212125] mipi-cal
<4>[ 3.212258] bsev
<4>[ 3.212390] fuse_burn
<4>[ 3.212511] cclk_lp
<4>[ 3.212624] pll_x_out0
<4>[ 3.212903] pll_u_12M
<4>[ 3.213019] pll_u_60M
<4>[ 3.213135] pll_d2_out0
<4>[ 3.213351] pll_p_out3
<4>[ 3.213469] pll_c_out1
<4>[ 3.213583] pll_m_out1
<6>[ 3.213706] DVFS: Got RTC device name:rtc0
<6>[ 3.215035] palmas-rtc palmas-rtc.3: palmas_rtc_read_time() 113 7 9 4 23 56
<4>[ 3.215506] tegra_dvfs: vdd_cpu: stats above 1390 mV will be squashed
<4>[ 3.216260] tegra_dvfs: vdd_core: stats above 1390 mV will be squashed
<6>[ 3.224846] Tegra CPU DFLL is initialized
<6>[ 3.225222] CPU rate: 613 MHz
<6>[ 3.227088] cpu_dfll cooling device is registered
<6>[ 3.446327] tegra dvfs: tegra sysfs cap interface is initialized
<6>[ 3.446556] tegra dvfs: tegra sysfs floor interface is initialized
<6>[ 3.449424] Core EDP sysfs interface is initialized
<6>[ 3.450850] tegra_actmon.emc: Completed initialization (0)
<6>[ 3.451182] tegra_actmon.avp: Completed initialization (0)
<6>[ 3.453394] vi vi: vi_probe: ++
<6>[ 3.453495] vi vi: tegra_camera_register: ++
<6>[ 3.454851] vi vi: initialized
<4>[ 3.456464] palmas_regen2: incomplete constraints, leaving on
<4>[ 3.458176] palmas_smps12: incomplete constraints, leaving on
<6>[ 3.458964] gpio wake51 for gpio=128
<6>[ 3.459260] gpio wake23 for gpio=69
<6>[ 3.459400] gpio wake27 for gpio=144
<6>[ 3.459793] input: gpio-keys as /devices/platform/gpio-keys.0/input/input3
<6>[ 3.461122] palmas-rtc palmas-rtc.3: palmas_rtc_read_time() 113 7 9 4 23 56
<6>[ 3.461340] palmas-rtc palmas-rtc.3: setting system clock to 2013-08-09 04:23:56 UTC (1376022236)
<6>[ 3.461756] ALSA device list:
<6>[ 3.461852] #0: HDA NVIDIA Tegra at 0x70038000 irq 113
<6>[ 3.462022] #1: tegra-rt5640
<4>[ 3.462159] Warning: unable to open an initial console.
<3>[ 3.465118] init: could not import file '/init.recovery.roth.rc' from '/init.rc'
<3>[ 3.556839] android_usb: already disabled
<3>[ 3.557462] init: Unable to open persistent property directory /data/property errno: 2
<4>[ 3.602852] tegradc tegradc.0: DC doesn't stop at end of frame.
<4>[ 3.856850] tegradc tegradc.0: DC doesn't stop at end of frame.
<3>[ 3.857389] tegradc tegradc.0: DSI pad calibration done
<6>[ 4.463805] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts:
<6>[ 4.610329] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts:
<3>[ 4.616236] android_usb: already disabled
<6>[ 4.618169] adb_open
<6>[ 4.618314] adb_bind_config
<6>[ 4.621974] tegra-udc tegra-udc.0: detected SDP port
<6>[ 4.622095] bq2419x 0-006b: Setting charging current 2
<6>[ 4.729226] android_work: did not send uevent (0 0 (null))
<6>[ 4.765740] android_work: sent uevent USB_STATE=CONNECTED
<6>[ 4.769283] android_work: sent uevent USB_STATE=DISCONNECTED
<6>[ 4.823241] bq2419x 0-006b: Charging enabled
<6>[ 4.849696] android_work: sent uevent USB_STATE=CONNECTED
<6>[ 4.984224] tegra-udc tegra-udc.0: detected SDP port
<6>[ 4.984350] bq2419x 0-006b: Setting charging current 2
<6>[ 5.124263] android_work: sent uevent USB_STATE=DISCONNECTED
<6>[ 5.161733] android_work: sent uevent USB_STATE=CONNECTED
<6>[ 5.165407] android_work: sent uevent USB_STATE=DISCONNECTED
<6>[ 5.185224] bq2419x 0-006b: Charging enabled
<6>[ 5.245744] android_work: sent uevent USB_STATE=CONNECTED
<6>[ 5.252164] android_usb gadget: high-speed config #1: android
<6>[ 5.252511] tegra-udc tegra-udc.0: detected SDP port
<6>[ 5.252832] bq2419x 0-006b: Setting charging current 500
<6>[ 5.253009] android_work: sent uevent USB_STATE=CONFIGURED
<6>[ 5.453226] bq2419x 0-006b: Charging enabled
<4>[ 15.267828] adbd (170): /proc/170/oom_adj is deprecated, please use /proc/170/oom_score_adj instead.
<6>[ 26.198292] bq2419x 0-006b: bq2419x_reset_wdt() from THREAD()
Click to expand...
Click to collapse
Thanks for all of this I will attempt it again later this weekend
Edited the ramdisk on the original boot image and...
logcat
pastebin
chevyowner said:
Edited the ramdisk on the original boot image and...
logcat
pastebin
Click to expand...
Click to collapse
Thanks again is there a way to add adb on boot by default? So I can add it to the source
Cool I found the error I just fixed this up in my other nvidia tree for that hisense tablet I really appreciate the log
Unjustified Dev said:
Thanks again is there a way to add adb on boot by default? So I can add it to the source
Cool I found the error I just fixed this up in my other nvidia tree for that hisense tablet I really appreciate the log
Click to expand...
Click to collapse
Yes, but I am to tired to think of it right now but here a zip of the boot.img I modded.
chevyowner said:
Yes, but I am to tired to think of it right now but here a zip of the boot.img I modded.
Click to expand...
Click to collapse
Ok I will find it I fixed those errors I will be back after I wake up

How to Install official miui v4 stable Rom on Desire S

I followed below steps for installing official miui v4 rom to desire s
1. Download official miui v4 stable rom from www.miui.com
2. Format sd card and system (clean format).
3. Hboot is 7.0
4. Installed official chinese sense 3.6 rom and reboot the phone to recovery.
5. factory reset and wipe cache & delvic cache.
My problem is while installing miui v4 3.2.22 stable official version...my installation aborted saying
updating package....
formatting system.......
do not format system.............
installed successfully....
Post reboot HTC splash screen appears for a while and then phone reboots on its own to recovery.
Please help...
talktoraj83 said:
I followed below steps for installing official miui v4 rom to desire s
1. Download official miui v4 stable rom from www.miui.com
2. Format sd card and system (clean format).
3. Hboot is 7.0
4. Installed official chinese sense 3.6 rom and reboot the phone to recovery.
5. factory reset and wipe cache & delvic cache.
My problem is while installing miui v4 3.2.22 stable official version...my installation aborted saying
updating package....
formatting system.......
do not format system.............
installed successfully....
Post reboot HTC splash screen appears for a while and then phone reboots on its own to recovery.
Please help...
Click to expand...
Click to collapse
Flash the boot.img from the ROM.zip through cmd on your PC.
NVardan said:
Flash the boot.img from the ROM.zip through cmd on your PC.
Click to expand...
Click to collapse
But he's on hboot 7.xxx
Shouldn't he be alrd s-off. Op do tell us if you're s-on or off.
Get 4ext. I think there's an image file that u can flash in fastboot mode. Search dev section for the thread.
Wipe everything (except sdcard)
Flash ROM
Reboot into rom
*flash gapps after set up.
FromBeyondThisWorld
#Fear said:
But he's on hboot 7.xxx
Shouldn't he be alrd s-off. Op do tell us if you're s-on or off.
Get 4ext. I think there's an image file that u can flash in fastboot mode. Search dev section for the thread.
Wipe everything (except sdcard)
Flash ROM
Reboot into rom
*flash gapps after set up.
FromBeyondThisWorld
Click to expand...
Click to collapse
You're right. That makes sense. HBOOT 7.xxx is already S-Off (I'm on this hboot too, I didn't notice ). :silly:
#Fear said:
But he's on hboot 7.xxx
Shouldn't he be alrd s-off. Op do tell us if you're s-on or off.
Get 4ext. I think there's an image file that u can flash in fastboot mode. Search dev section for the thread.
Wipe everything (except sdcard)
Flash ROM
Reboot into rom
*flash gapps after set up.
FromBeyondThisWorld
Click to expand...
Click to collapse
Ya my phone is s-off....and had pushed boot.img successfully bufore and after installation of rom.zip file but still same problem..
I think m missing some step....that is specific for flashing miui v4 official rom for desire s
What recovery is on your device? Try using 4ext :thumbup:
1.full wipe(except sdcard)
2.flash rom
3.reboot
Don't flash gapps first and see if it boots.
FromBeyondThisWorld
#Fear said:
What recovery is on your device? Try using 4ext :thumbup:
1.full wipe(except sdcard)
2.flash rom
3.reboot
Don't flash gapps first and see if it boots.
FromBeyondThisWorld
Click to expand...
Click to collapse
No its not booting..i have tried all permutation & combination....
on latest 4ext recovery
talktoraj83 said:
No its not booting..i have tried all permutation & combination....
on latest 4ext recovery
Click to expand...
Click to collapse
There is one hint if it could help some one to find out issue with my installation...
When m trying below patch for formatting my phone gives error..
http://www.androidfilehost.com/?fid=9390189810980749321
talktoraj83 said:
There is one hint if it could help some one to find out issue with my installation...
When m trying below patch for formatting my phone gives error..
http://www.androidfilehost.com/?fid=9390189810980749321
Click to expand...
Click to collapse
This guy had bootloop too when he tried, but he was trying the russian version. He solve it with amidabuddha kernel.
Cheers
#Fear said:
This guy had bootloop too when he tried, but he was trying the russian version. He solve it with amidabuddha kernel.
Cheers
Click to expand...
Click to collapse
Can you confirm that miuiv4 official version rom has kernel inside it or not?
talktoraj83 said:
Can you confirm that miuiv4 official version rom has kernel inside it or not?
Click to expand...
Click to collapse
Just look inside the zip and you`ll know....
Flashing another kernel wouldn`t harm,
if your device isn`t booting anyway...
take a logcat and attach it and/or look inside,
then all`ll become clear...
asgardr said:
Just look inside the zip and you`ll know....
Flashing another kernel wouldn`t harm,
if your device isn`t booting anyway...
take a logcat and attach it and/or look inside,
then all`ll become clear...
Click to expand...
Click to collapse
Please find below logcat-
10.554687] init: untracked pid 1288 exited
<6>[ 10.666137] EXT4-fs (mmcblk0p27): mounted filesystem with ordered data mode. Opts:
<3>[ 10.779083] EXT3-fs (mmcblk0p25): error: couldn't mount because of unsupported optional features (40)
<3>[ 10.779937] EXT2-fs (mmcblk0p25): error: couldn't mount because of unsupported optional features (40)
<6>[ 10.828582] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: (null)
<3>[ 10.829498] init: untracked pid 1309 exited
<6>[ 11.487731] pm8058_led_currents_store: bank 6 currents 1
<6>[ 11.487976] pm8058_drvx_led_brightness_set: bank 6 brightness 0
<6>[ 11.488128] pm8058_drvx_led_brightness_set: bank 6 brightness 255
<6>[ 11.488708] pm8058_led_currents_store: bank 6 currents 9
<6>[ 11.488830] pm8058_drvx_led_brightness_set: bank 6 brightness 0
<6>[ 11.489074] pm8058_drvx_led_brightness_set: bank 6 brightness 255
<6>[ 11.490509] pm8058_drvx_led_brightness_set: bank 6 brightness 9
<6>[ 11.491119] pm8058_drvx_led_brightness_set: bank 6 brightness 90
<6>[ 11.491638] pm8058_drvx_led_brightness_set: bank 6 brightness 9
<6>[ 11.492218] pm8058_drvx_led_brightness_set: bank 6 brightness 90
<3>[ 11.875061] init: untracked pid 1343 exited
<6>[ 17.498992] [email protected],236
<6>[ 17.559783] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 17.561279] [ATS][set_vibration][successful]
<6>[ 17.584899] [VIB]vibrator_timer_func
<6>[ 17.663330] [email protected],236
<6>[ 25.172546] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 25.173919] [ATS][set_vibration][successful]
<6>[ 25.197753] [VIB]vibrator_timer_func
<6>[ 34.992889] [BATT] M2A_RPC: set_charging: 0 at 29234003670 (2013-08-30 18:23:52.340426829 UTC)
<6>[ 34.993194] Switch charger OFF
<6>[ 34.994964] [BATT] M2A_RPC: set_charging: 1 at 29236046353 (2013-08-30 18:23:52.342500000 UTC)
<6>[ 34.995269] Switch charger ON (SLOW)
<6>[ 34.996215] batt: Switch charger ON (SLOW): regh 0x03=83
<6>[ 34.997314] [BATT] M2A_RPC: cable_update: USB at 29238332939 (2013-08-30 18:23:52.344847561 UTC)
<6>[ 34.997619] [BATT] htc_cable_status_update: 0 -> 1
<6>[ 34.997741] [USB] msm_hsusb_set_vbus_state: 1
<6>[ 34.997924] [USB] hsusb: OFFLINE -> ONLINE
<6>[ 34.998016] [USB] lpm exit
<6>[ 34.999298] [USB] hsusb: reset controller
<6>[ 35.044311] msm_hsusb_phy_reset
<6>[ 35.189300] [USB] ulpi: write 0x06 to 0x36
<6>[ 35.189392] [USB] ulpi: write 0x0c to 0x31
<6>[ 35.189605] [USB] ulpi: write 0x31 to 0x32
<6>[ 35.189697] [USB] ulpi: write 0x01 to 0x0d
<6>[ 35.189788] [USB] ulpi: write 0x01 to 0x10
<6>[ 35.189971] [USB] handle_notify_offline: notify offline
<6>[ 35.190093] [USB] msm_hsusb: enable pullup
<6>[ 35.193206] [USB] suspend
<6>[ 35.209381] [USB] not AC charger
<6>[ 35.293640] [USB] reset
<6>[ 35.293731] [USB] send connect type 1
<6>[ 35.293853] Touch: cable change to 1
<6>[ 35.295227] fsg_set_ums_state: 1
<6>[ 35.295349] ums: set state 1
<6>[ 35.295745] [BATT] online=1
<6>[ 35.295928] [USB] portchange USB_SPEED_HIGH
<6>[ 35.296112] [BATT] Update SMEM: cable type 1 at 29536839037 (2013-08-30 18:23:52.643353659 UTC)
<6>[ 35.338897] pm8058_pwm_led_brightness_set: bank 0 brightness 0
<6>[ 35.345031] pm8058_pwm_led_brightness_set: bank 1 brightness 1
<6>[ 35.351470] pm8058_pwm_led_brightness_set: bank 0 brightness 0
<6>[ 35.357391] pm8058_pwm_led_brightness_set: bank 1 brightness 1
<6>[ 35.484069] android_usb gadget: high speed config #1: android
<6>[ 35.484222] adb_function_set_alt: maxsize = 512
<6>[ 35.484497] ums: set state 1
<6>[ 66.039398] Release 'boot-time' perf_lock
<6>[ 66.620391] Release 'boot-time' no_halt_lock
<6>[ 67.040405] perflock_notifier_call: cpufreq recover policy 245760 1024000
<6>[ 246.697113] [BATT] M2A_RPC: level_update: 68 at 240732143916 (2013-08-30 18:27:23.838079269 UTC)
<6>[ 246.698181] [BATT] power_supply_changed: battery at 240732906111 (2013-08-30 18:27:23.839176830 UTC)
<6>[ 246.718322] pm8058_pwm_led_brightness_set: bank 0 brightness 0
<6>[ 246.737548] pm8058_pwm_led_brightness_set: bank 1 brightness 1
<3>[ 246.935974] INFO: task audio_mvs:428 blocked for more than 120 seconds.
<3>[ 246.936370] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
<6>[ 246.937011] audio_mvs D c0425f80 0 428 2 0x00000000
<4>[ 246.938323] Backtrace:
<4>[ 246.939056] [<c0425bbc>] (schedule+0x0/0x450) from [<c005101c>] (__msm_rpc_read+0x22c/0xa4c)
<4>[ 246.939758] [<c0050df0>] (__msm_rpc_read+0x0/0xa4c) from [<c0051858>] (msm_rpc_read+0x1c/0x88)
<4>[ 246.940185] [<c005183c>] (msm_rpc_read+0x0/0x88) from [<c0074f34>] (audio_mvs_thread+0x4c/0x164)
<4>[ 246.940856] r6:00000000 r5:c7e69f9c r4:c05ef368
<4>[ 246.942596] [<c0074ee8>] (audio_mvs_thread+0x0/0x164) from [<c00b1f28>] (kthread+0x84/0x8c)
<4>[ 246.942962] r8:00000000 r7:c05ef368 r6:c0074ee8 r5:c7e69fcc r4:c7c1df48
<4>[ 246.945312] [<c00b1ea4>] (kthread+0x0/0x8c) from [<c009e9a0>] (do_exit+0x0/0x6ac)
<4>[ 246.946044] r7:00000013 r6:c009e9a0 r5:c00b1ea4 r4:c7c1df48
<3>[ 246.947753] INFO: task krmt_storagecln:460 blocked for more than 120 seconds.
<3>[ 246.948425] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
<6>[ 246.948791] krmt_storagecln D c0425f80 0 460 2 0x00000000
<4>[ 246.950073] Backtrace:
<4>[ 246.950805] [<c0425bbc>] (schedule+0x0/0x450) from [<c004a1c4>] (rpc_clients_cb_thread+0x98/0x1b0)
<4>[ 246.951507] [<c004a12c>] (rpc_clients_cb_thread+0x0/0x1b0) from [<c00b1f28>] (kthread+0x84/0x8c)
<4>[ 246.952239] [<c00b1ea4>] (kthread+0x0/0x8c) from [<c009e9a0>] (do_exit+0x0/0x6ac)
<4>[ 246.952606] r7:00000013 r6:c009e9a0 r5:c00b1ea4 r4:c7c1ddf8
<3>[ 246.954620] INFO: task voice:740 blocked for more than 120 seconds.
<3>[ 246.955261] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
<6>[ 246.955657] voice D c0425f80 0 740 2 0x00000000
<4>[ 246.957031] Backtrace:
<4>[ 246.957763] [<c0425bbc>] (schedule+0x0/0x450) from [<c04266e8>] (schedule_timeout+0x24/0x23c)
<4>[ 246.958465] [<c04266c4>] (schedule_timeout+0x0/0x23c) from [<c04264e0>] (wait_for_common+0x12c/0x1f0)
<4>[ 246.959136] r7:c76f2000 r6:00000002 r5:c05eaf44 r4:7fffffff
<4>[ 246.960876] [<c04263b4>] (wait_for_common+0x0/0x1f0) from [<c0426684>] (wait_for_completion+0x1c/0x20)
<4>[ 246.961578] [<c0426668>] (wait_for_completion+0x0/0x20) from [<c005a38c>] (voice_thread+0x6c/0x554)
<4>[ 246.962280] [<c005a320>] (voice_thread+0x0/0x554) from [<c00b1f28>] (kthread+0x84/0x8c)
<4>[ 246.962707] [<c00b1ea4>] (kthread+0x0/0x8c) from [<c009e9a0>] (do_exit+0x0/0x6ac)
<4>[ 246.963378] r7:00000013 r6:c009e9a0 r5:c00b1ea4 r4:c7c1df30
<3>[ 367.073181] INFO: task rpcrouter:274 blocked for more than 120 seconds.
<3>[ 367.073547] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
<6>[ 367.074249] rpcrouter D c0425f80 0 274 2 0x00000000
<4>[ 367.075286] Backtrace:
<4>[ 367.076354] [<c0425bbc>] (schedule+0x0/0x450) from [<c004f748>] (rr_read+0x178/0x1a4)
<4>[ 367.076751] [<c004f5d0>] (rr_read+0x0/0x1a4) from [<c004f900>] (do_read_data+0x1c/0xa08)
<4>[ 367.077453] [<c004f8e4>] (do_read_data+0x0/0xa08) from [<c00ae168>] (worker_thread+0x18c/0x238)
<4>[ 367.078186] [<c00adfdc>] (worker_thread+0x0/0x238) from [<c00b1f28>] (kthread+0x84/0x8c)
<4>[ 367.078887] [<c00b1ea4>] (kthread+0x0/0x8c) from [<c009e9a0>] (do_exit+0x0/0x6ac)
<4>[ 367.079284] r7:00000013 r6:c009e9a0 r5:c00b1ea4 r4:c7c2bd70
<3>[ 367.081268] INFO: task audio_mvs:428 blocked for more than 120 seconds.
<3>[ 367.081634] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
<6>[ 367.082305] audio_mvs D c0425f80 0 428 2 0x00000000
<4>[ 367.083679] Backtrace:
<4>[ 367.084381] [<c0425bbc>] (schedule+0x0/0x450) from [<c005101c>] (__msm_rpc_read+0x22c/0xa4c)
<4>[ 367.085052] [<c0050df0>] (__msm_rpc_read+0x0/0xa4c) from [<c0051858>] (msm_rpc_read+0x1c/0x88)
<4>[ 367.085479] [<c005183c>] (msm_rpc_read+0x0/0x88) from [<c0074f34>] (audio_mvs_thread+0x4c/0x164)
<4>[ 367.086151] r6:00000000 r5:c7e69f9c r4:c05ef368
<4>[ 367.087554] [<c0074ee8>] (audio_mvs_thread+0x0/0x164) from [<c00b1f28>] (kthread+0x84/0x8c)
<4>[ 367.088195] r8:00000000 r7:c05ef368 r6:c0074ee8 r5:c7e69fcc r4:c7c1df48
<4>[ 367.090545] [<c00b1ea4>] (kthread+0x0/0x8c) from [<c009e9a0>] (do_exit+0x0/0x6ac)
<4>[ 367.090911] r7:00000013 r6:c009e9a0 r5:c00b1ea4 r4:c7c1df48
<3>[ 367.092895] INFO: task krmt_storagecln:460 blocked for more than 120 seconds.
<3>[ 367.093627] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
<6>[ 367.093994] krmt_storagecln D c0425f80 0 460 2 0x00000000
<4>[ 367.095336] Backtrace:
<4>[ 367.096038] [<c0425bbc>] (schedule+0x0/0x450) from [<c004a1c4>] (rpc_clients_cb_thread+0x98/0x1b0)
<4>[ 367.096771] [<c004a12c>] (rpc_clients_cb_thread+0x0/0x1b0) from [<c00b1f28>] (kthread+0x84/0x8c)
<4>[ 367.097442] [<c00b1ea4>] (kthread+0x0/0x8c) from [<c009e9a0>] (do_exit+0x0/0x6ac)
<4>[ 367.097808] r7:00000013 r6:c009e9a0 r5:c00b1ea4 r4:c7c1ddf8
<3>[ 367.099822] INFO: task voice:740 blocked for more than 120 seconds.
<3>[ 367.100189] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
<6>[ 367.100860] voice D c0425f80 0 740 2 0x00000000
<4>[ 367.102203] Backtrace:
<4>[ 367.102905] [<c0425bbc>] (schedule+0x0/0x450) from [<c04266e8>] (schedule_timeout+0x24/0x23c)
<4>[ 367.103637] [<c04266c4>] (schedule_timeout+0x0/0x23c) from [<c04264e0>] (wait_for_common+0x12c/0x1f0)
<4>[ 367.104034] r7:c76f2000 r6:00000002 r5:c05eaf44 r4:7fffffff
<4>[ 367.106018] [<c04263b4>] (wait_for_common+0x0/0x1f0) from [<c0426684>] (wait_for_completion+0x1c/0x20)
<4>[ 367.106750] [<c0426668>] (wait_for_completion+0x0/0x20) from [<c005a38c>] (voice_thread+0x6c/0x554)
<4>[ 367.107452] [<c005a320>] (voice_thread+0x0/0x554) from [<c00b1f28>] (kthread+0x84/0x8c)
<4>[ 367.107849] [<c00b1ea4>] (kthread+0x0/0x8c) from [<c009e9a0>] (do_exit+0x0/0x6ac)
<4>[ 367.108520] r7:00000013 r6:c009e9a0 r5:c00b1ea4 r4:c7c1df30
<6>[ 486.697143] [BATT] M2A_RPC: level_update: 69 at 480497997575 (2013-08-30 18:31:23.603963416 UTC)
<6>[ 486.699218] [BATT] power_supply_changed: battery at 480500162209 (2013-08-30 18:31:23.606036587 UTC)
<6>[ 486.718139] pm8058_pwm_led_brightness_set: bank 0 brightness 0
<6>[ 486.737762] pm8058_pwm_led_brightness_set: bank 1 brightness 1
<3>[ 487.220397] INFO: task audio_mvs:428 blocked for more than 120 seconds.
<3>[ 487.221069] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
<6>[ 487.221466] audio_mvs D c0425f80 0 428 2 0x00000000
<4>[ 487.222778] Backtrace:
<4>[ 487.223541] [<c0425bbc>] (schedule+0x0/0x450) from [<c005101c>] (__msm_rpc_read+0x22c/0xa4c)
<4>[ 487.224243] [<c0050df0>] (__msm_rpc_read+0x0/0xa4c) from [<c0051858>] (msm_rpc_read+0x1c/0x88)
<4>[ 487.224945] [<c005183c>] (msm_rpc_read+0x0/0x88) from [<c0074f34>] (audio_mvs_thread+0x4c/0x164)
<4>[ 487.225341] r6:00000000 r5:c7e69f9c r4:c05ef368
<4>[ 487.227020] [<c0074ee8>] (audio_mvs_thread+0x0/0x164) from [<c00b1f28>] (kthread+0x84/0x8c)
<4>[ 487.227691] r8:00000000 r7:c05ef368 r6:c0074ee8 r5:c7e69fcc r4:c7c1df48
<4>[ 487.229736] [<c00b1ea4>] (kthread+0x0/0x8c) from [<c009e9a0>] (do_exit+0x0/0x6ac)
<4>[ 487.230468] r7:00000013 r6:c009e9a0 r5:c00b1ea4 r4:c7c1df48
<3>[ 487.232208] INFO: task krmt_storagecln:460 blocked for more than 120 seconds.
<3>[ 487.232879] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
<6>[ 487.233551] krmt_storagecln D c0425f80 0 460 2 0x00000000
<4>[ 487.234588] Backtrace:
<4>[ 487.235290] [<c0425bbc>] (schedule+0x0/0x450) from [<c004a1c4>] (rpc_clients_cb_thread+0x98/0x1b0)
<4>[ 487.235992] [<c004a12c>] (rpc_clients_cb_thread+0x0/0x1b0) from [<c00b1f28>] (kthread+0x84/0x8c)
<4>[ 487.236694] [<c00b1ea4>] (kthread+0x0/0x8c) from [<c009e9a0>] (do_exit+0x0/0x6ac)
<4>[ 487.237365] r7:00000013 r6:c009e9a0 r5:c00b1ea4 r4:c7c1ddf8
<3>[ 487.239044] INFO: task voice:740 blocked for more than 120 seconds.
<3>[ 487.239715] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
<6>[ 487.240081] voice D c0425f80 0 740 2 0x00000000
<4>[ 487.241485] Backtrace:
<4>[ 487.242187] [<c0425bbc>] (schedule+0x0/0x450) from [<c04266e8>] (schedule_timeout+0x24/0x23c)
<4>[ 487.242889] [<c04266c4>] (schedule_timeout+0x0/0x23c) from [<c04264e0>] (wait_for_common+0x12c/0x1f0)
<4>[ 487.243560] r7:c76f2000 r6:00000002 r5:c05eaf44 r4:7fffffff
<4>[ 487.245269] [<c04263b4>] (wait_for_common+0x0/0x1f0) from [<c0426684>] (wait_for_completion+0x1c/0x20)
<4>[ 487.245971] [<c0426668>] (wait_for_completion+0x0/0x20) from [<c005a38c>] (voice_thread+0x6c/0x554)
<4>[ 487.246673] [<c005a320>] (voice_thread+0x0/0x554) from [<c00b1f28>] (kthread+0x84/0x8c)
<4>[ 487.247375] [<c00b1ea4>] (kthread+0x0/0x8c) from [<c009e9a0>] (do_exit+0x0/0x6ac)
<4>[ 487.247772] r7:00000013 r6:c009e9a0 r5:c00b1ea4 r4:c7c1df30
<6>[ 491.649566] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 491.650665] [ATS][set_vibration][successful]
<6>[ 491.674682] [VIB]vibrator_timer_func
<6>[ 492.960632] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 492.961486] [ATS][set_vibration][successful]
<6>[ 492.985748] [VIB]vibrator_timer_func
<6>[ 494.228454] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 494.229370] [ATS][set_vibration][successful]
<6>[ 494.253662] [VIB]vibrator_timer_func
<6>[ 494.353851] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts:
<6>[ 505.722808] EXT4-fs (mmcblk0p27): mounted filesystem with ordered data mode. Opts:
<6>[ 507.874176] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 507.875091] [ATS][set_vibration][successful]
<6>[ 507.899688] [VIB]vibrator_timer_func
<6>[ 510.369537] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 510.370391] [ATS][set_vibration][successful]
<6>[ 510.394653] [VIB]vibrator_timer_func
<6>[ 512.736968] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 512.738128] [ATS][set_vibration][successful]
<6>[ 512.762573] [VIB]vibrator_timer_func
<6>[ 514.352325] Touch: calibration confirm
<6>[ 514.373626] Touch Status: 0x01 0x10 0x77 0xA1 0x0A
<6>[ 514.381561] Touch Status: 0x01 0x00 0x77 0xA1 0x0A
<6>[ 514.776885] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 514.777862] [ATS][set_vibration][successful]
<6>[ 514.802093] [VIB]vibrator_timer_func
<6>[ 519.868621] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 519.869506] [ATS][set_vibration][successful]
<6>[ 519.893737] [VIB]vibrator_timer_func
<6>[ 522.455322] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 522.456207] [ATS][set_vibration][successful]
<6>[ 522.480499] [VIB]vibrator_timer_func
<6>[ 523.943817] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 523.944732] [ATS][set_vibration][successful]
<6>[ 523.969024] [VIB]vibrator_timer_func
<6>[ 529.148071] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 529.149322] [ATS][set_vibration][successful]
<6>[ 529.173309] [VIB]vibrator_timer_func
<6>[ 536.841979] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 536.843017] [ATS][set_vibration][successful]
<6>[ 536.867218] [VIB]vibrator_timer_func
<6>[ 543.078704] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 543.079650] [ATS][set_vibration][successful]
<6>[ 543.103851] [VIB]vibrator_timer_func
<6>[ 546.098419] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 546.099304] [ATS][set_vibration][successful]
<6>[ 546.123565] [VIB]vibrator_timer_func
<6>[ 547.273925] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 547.274871] [ATS][set_vibration][successful]
<6>[ 547.299133] [VIB]vibrator_timer_func
<6>[ 549.013427] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 549.014587] [ATS][set_vibration][successful]
<6>[ 549.038635] [VIB]vibrator_timer_func
<6>[ 550.455963] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 550.456909] [ATS][set_vibration][successful]
<6>[ 550.481201] [VIB]vibrator_timer_func
<6>[ 551.694274] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 551.695129] [ATS][set_vibration][successful]
<6>[ 551.719390] [VIB]vibrator_timer_func
<6>[ 562.994323] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 562.995758] [ATS][set_vibration][successful]
<6>[ 563.019470] [VIB]vibrator_timer_func
<6>[ 569.194122] [VIB] recovery(parent:recovery): vibrates 25 msec
<6>[ 569.195098] [ATS][set_vibration][successful]
<6>[ 569.219329] [VIB]vibrator_timer_func
<6>[ 569.385711] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts:
<3>[ 569.644683] tc: version magic '2.6.35.10 preempt mod_unload ARMv7 ' should be '2.6.35.10-g13f6602 preempt mod_unload ARMv7 '
<6>[ 572.967926] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts:
<3>[ 573.057800] EXT3-fs (mmcblk0p28): error: couldn't mount because of unsupported optional features (40)
<3>[ 573.058654] EXT2-fs (mmcblk0p28): error: couldn't mount because of unsupported optional features (40)
<6>[ 573.118988] EXT4-fs (mmcblk0p28): mounted filesystem with ordered data mode. Opts: (null)
<3>[ 573.575347] EXT3-fs (mmcblk0p29): error: couldn't mount because of unsupported optional features (240)
<3>[ 573.576202] EXT2-fs (mmcblk0p29): error: couldn't mount because of unsupported optional features (240)
<4>[ 573.578399] EXT4-fs (mmcblk0p29): warning: checktime reached, running e2fsck is recommended
<6>[ 573.636688] EXT4-fs (mmcblk0p29): mounted filesystem without journal. Opts: (null)
<6>[ 606.694824] [BATT] M2A_RPC: set_charging: 100 at 600378089037 (2013-08-30 18:33:23.484603659 UTC)
<6>[ 606.695129] Switch charger CHECK
<6>[ 606.695495] TPS65200 STATUS_A27
I´m to late... But extract attached folder and push the folder in the ROM.zip ...
It´s a fix
Some lines are wrong in updater-script

[Q] bricked tf300tg???

hi there,
i read a lot about unlock bricked tf300tg but i didnt read any solution to my problem.
here it is.
i did a factory reset from the cyanogenmod rom 12.1 (problems on wifi).
after that it boot to recovery and
TRWP is looping (twrp blinking).
i tried:
- reset button
- adb reboot bootloader (do nothing, dont even reboot)
- adb reboot fastboot (do nothing, dont even reboot)
- fastboot dont work (not detectable)
the only thing working is other adb commands like shell.
any clue how to unbrick?
vassili69 said:
hi there,
i read a lot about unlock bricked tf300tg but i didnt read any solution to my problem.
here it is.
i did a factory reset from the cyanogenmod rom 12.1 (problems on wifi).
after that it boot to recovery and
TRWP is looping (twrp blinking).
i tried:
- reset button
- adb reboot bootloader (do nothing, dont even reboot)
- adb reboot fastboot (do nothing, dont even reboot)
- fastboot dont work (not detectable)
the only thing working is other adb commands like shell.
any clue how to unbrick?
Click to expand...
Click to collapse
Well for starters you can use the correct command
Code:
adb reboot-bootloader
Is the correct command to get to bootloader from adb ....
When you do have adb access and the above does not work ...
Pull a partition tablet like this .....
Code:
adb pull /proc/partitions
Post it here for us to see .....
Thx Josh
lj50036 said:
Well for starters you can use the correct command
Code:
adb reboot-bootloader
Is the correct command to get to bootloader from adb ....
When you do have adb access and the above does not work ...
Pull a partition tablet like this .....
Code:
adb pull /proc/partitions
Post it here for us to see .....
Thx Josh
Click to expand...
Click to collapse
nere it is:
Code:
major minor #blocks name
8 0 312571224 sda
8 1 358400 sda1
8 2 229787992 sda2
8 3 1 sda3
8 5 4099072 sda5
8 6 78323712 sda6
11 0 1048575 sr0
and more part of the dmesg file.
Code:
<5>[ 39.371813] asuspec: [asuspec_enter_s3_work_function] EC in S3
<6>[ 41.918912] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
<6>[ 42.118953] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
<6>[ 42.254865] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts:
<5>[ 43.622266] asuspec: [asuspec_send_ec_req] send EC_Request
<5>[ 43.691200] asuspec: [asuspec_work_function] 0x2 0x81 0x50 0xff
<5>[ 43.691228] asuspec: [asuspec_smi] ASUSPEC_SMI_HANDSHAKING
<4>[ 43.889337] pad_get_capacity val->intval=11 ret=16
<4>[ 43.894148] pad_get_psp val->intval=Not charging ret=c0
<4>[ 44.126784] cpu ext_temperature=45
<5>[ 44.892308] asuspec: [asuspec_enter_s3_work_function] EC in S3
<6>[ 47.391756] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
<6>[ 47.664061] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
<6>[ 47.806513] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts:
<4>[ 49.136171] cpu ext_temperature=44
<5>[ 49.185264] asuspec: [asuspec_send_ec_req] send EC_Request
<5>[ 49.245322] asuspec: [asuspec_work_function] 0x2 0x81 0x50 0xff
<5>[ 49.245332] asuspec: [asuspec_smi] ASUSPEC_SMI_HANDSHAKING
<4>[ 49.448673] pad_get_capacity val->intval=11 ret=16
<4>[ 49.453256] pad_get_psp val->intval=Not charging ret=c0
<6>[ 49.594574] tegra-otg tegra-otg: PERIPHERAL --> SUSPEND
<6>[ 49.594588] tegra_vbus_session turn VBUS state from on to off
<6>[ 49.594621] reset_config : usb reset config wake unlock --
<6>[ 49.594674] The USB/AC cable is disconnected.
<4>[ 49.594683] ========================================================
<4>[ 49.594688] battery_callback usb_cable_state =0
<4>[ 49.594692] ========================================================
<6>[ 49.594756] android_work: sent uevent USB_STATE=DISCONNECTED
<6>[ 49.594915] adb_release
<6>[ 49.595016] adb_open(adbd)
<6>[ 49.595025] adb_bind_config
<5>[ 49.643735] asuspec: [asuspec_work_function] 0x2 0x81 0x31 0xff
<5>[ 50.452108] asuspec: [asuspec_enter_s3_work_function] EC in S3
<4>[ 51.585585] battery_status_poll 120 1
<5>[ 51.585623] asuspec: [asuspec_send_ec_req] send EC_Request
<5>[ 51.651597] asuspec: [asuspec_work_function] 0x2 0x81 0x50 0xff
<5>[ 51.651606] asuspec: [asuspec_smi] ASUSPEC_SMI_HANDSHAKING
<4>[ 51.858274] pad_get_psp val->intval=Not charging ret=c0
<4>[ 51.872332] pad_get_psp voltage_now =7162
<4>[ 51.879797] pad_get_capacity val->intval=11 ret=16
<4>[ 51.882624] pad_get_psp batttery temperature=327
<6>[ 51.968182] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
<6>[ 52.181335] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
<6>[ 52.322921] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts:
<6>[ 52.871988] tegra-otg tegra-otg: SUSPEND --> PERIPHERAL
<6>[ 52.872060] tegra_vbus_session turn VBUS state from off to on
<5>[ 52.907316] asuspec: [asuspec_enter_s3_work_function] EC in S3
<5>[ 52.935728] asuspec: [asuspec_work_function] 0x2 0x81 0x31 0xff
<6>[ 53.036568] detected SDP port
<6>[ 53.036615] The USB cable is connected (0.5A)
<4>[ 53.036653] ========================================================
<4>[ 53.036675] battery_callback usb_cable_state =1
<4>[ 53.036690] ========================================================
<6>[ 53.154829] android_work: did not send uevent (0 0 (null))
<6>[ 53.281342] android_work: sent uevent USB_STATE=CONNECTED
<6>[ 53.297878] set_config : usb set config wake lock ++
<6>[ 53.297941] android_usb gadget: high speed config #1: android
<6>[ 53.298316] android_work: sent uevent USB_STATE=CONFIGURED
<5>[ 53.705097] asuspec: [asuspec_send_ec_req] send EC_Request
<5>[ 53.763167] asuspec: [asuspec_work_function] 0x2 0x81 0x50 0xff
<5>[ 53.763178] asuspec: [asuspec_smi] ASUSPEC_SMI_HANDSHAKING
<4>[ 54.024995] pad_get_capacity val->intval=11 ret=16
<4>[ 54.040783] pad_get_psp val->intval=Not charging ret=c0
<4>[ 54.145992] cpu ext_temperature=44
<4>[ 55.035758] battery_status_poll 120 1
<5>[ 55.036131] asuspec: [asuspec_send_ec_req] send EC_Request
<5>[ 55.053045] asuspec: [asuspec_enter_s3_work_function] EC in S3
<5>[ 55.102744] asuspec: [asuspec_work_function] 0x2 0x81 0x50 0xff
<5>[ 55.102771] asuspec: [asuspec_smi] ASUSPEC_SMI_HANDSHAKING
<5>[ 55.126079] asuspec: [asuspec_work_function] 0x2 0x81 0x0 0xff
<4>[ 55.308262] pad_get_psp val->intval=Not charging ret=c0
<4>[ 55.322312] pad_get_psp voltage_now =7177
<4>[ 55.326868] pad_get_capacity val->intval=11 ret=16
<4>[ 55.331623] pad_get_psp batttery temperature=327
<5>[ 56.331774] asuspec: [asuspec_enter_s3_work_function] EC in S3
<6>[ 56.548246] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
<6>[ 56.746532] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
<6>[ 56.882291] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts:
<5>[ 58.269460] asuspec: [asuspec_send_ec_req] send EC_Request
<5>[ 58.343206] asuspec: [asuspec_work_function] 0x2 0x81 0x50 0xff
<5>[ 58.343235] asuspec: [asuspec_smi] ASUSPEC_SMI_HANDSHAKING
<4>[ 58.539214] pad_get_capacity val->intval=11 ret=16
<4>[ 58.543828] pad_get_psp val->intval=Not charging ret=c0
<4>[ 59.156212] cpu ext_temperature=44
<5>[ 59.542877] asuspec: [asuspec_enter_s3_work_function] EC in S3
<6>[ 62.046336] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
<6>[ 62.316740] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
<6>[ 62.451773] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts:
<5>[ 63.747023] asuspec: [asuspec_send_ec_req] send EC_Request
<5>[ 63.820100] asuspec: [asuspec_work_function] 0x2 0x81 0x50 0xff
<5>[ 63.820127] asuspec: [asuspec_smi] ASUSPEC_SMI_HANDSHAKING
<4>[ 64.018973] pad_get_capacity val->intval=11 ret=16
<4>[ 64.023700] pad_get_psp val->intval=Not charging ret=c0
<4>[ 64.166003] cpu ext_temperature=44
<5>[ 65.021790] asuspec: [asuspec_enter_s3_work_function] EC in S3
<6>[ 66.466000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
<6>[ 66.727513] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
<6>[ 66.861980] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts:
<5>[ 68.148709] asuspec: [asuspec_send_ec_req] send EC_Request
<5>[ 68.215218] asuspec: [asuspec_work_function] 0x2 0x81 0x50 0xff
<5>[ 68.215245] asuspec: [asuspec_smi] ASUSPEC_SMI_HANDSHAKING
<4>[ 68.418478] pad_get_capacity val->intval=11 ret=16
<4>[ 68.423089] pad_get_psp val->intval=Not charging ret=c0
<4>[ 69.176246] cpu ext_temperature=44
<5>[ 69.422072] asuspec: [asuspec_enter_s3_work_function] EC in S3
<6>[ 71.936179] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
<6>[ 72.201895] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
<6>[ 72.336407] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts:
<5>[ 73.627925] asuspec: [asuspec_send_ec_req] send EC_Request
<5>[ 73.694111] asuspec: [asuspec_work_function] 0x2 0x81 0x50 0xff
<5>[ 73.694139] asuspec: [asuspec_smi] ASUSPEC_SMI_HANDSHAKING
<4>[ 73.898595] pad_get_capacity val->intval=11 ret=16
<4>[ 73.903101] pad_get_psp val->intval=Not charging ret=c0
<4>[ 74.186215] cpu ext_temperature=44
<5>[ 74.902052] asuspec: [asuspec_enter_s3_work_function] EC in S3
<6>[ 77.332158] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
<6>[ 77.597073] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
<6>[ 77.732965] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts:
<5>[ 79.063568] asuspec: [asuspec_send_ec_req] send EC_Request
<5>[ 79.131452] asuspec: [asuspec_work_function] 0x2 0x81 0x50 0xff
<5>[ 79.131481] asuspec: [asuspec_smi] ASUSPEC_SMI_HANDSHAKING
<4>[ 79.197073] cpu ext_temperature=44
<4>[ 79.329052] pad_get_capacity val->intval=11 ret=16
<4>[ 79.333697] pad_get_psp val->intval=Not charging ret=c0
<5>[ 80.331780] asuspec: [asuspec_enter_s3_work_function] EC in S3
vassili69 said:
nere it is:
Code:
major minor #blocks name
8 0 312571224 sda
8 1 358400 sda1
8 2 229787992 sda2
8 3 1 sda3
8 5 4099072 sda5
8 6 78323712 sda6
11 0 1048575 sr0
and more part of the dmesg file.
Code:
<5>[ 39.371813] asuspec: [asuspec_enter_s3_work_function] EC in S3
<6>[ 41.918912] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
<6>[ 42.118953] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
<6>[ 42.254865] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts:
<5>[ 43.622266] asuspec: [asuspec_send_ec_req] send EC_Request
<5>[ 43.691200] asuspec: [asuspec_work_function] 0x2 0x81 0x50 0xff
<5>[ 43.691228] asuspec: [asuspec_smi] ASUSPEC_SMI_HANDSHAKING
<4>[ 43.889337] pad_get_capacity val->intval=11 ret=16
<4>[ 43.894148] pad_get_psp val->intval=Not charging ret=c0
<4>[ 44.126784] cpu ext_temperature=45
<5>[ 44.892308] asuspec: [asuspec_enter_s3_work_function] EC in S3
<6>[ 47.391756] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
<6>[ 47.664061] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
<6>[ 47.806513] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts:
<4>[ 49.136171] cpu ext_temperature=44
<5>[ 49.185264] asuspec: [asuspec_send_ec_req] send EC_Request
<5>[ 49.245322] asuspec: [asuspec_work_function] 0x2 0x81 0x50 0xff
<5>[ 49.245332] asuspec: [asuspec_smi] ASUSPEC_SMI_HANDSHAKING
<4>[ 49.448673] pad_get_capacity val->intval=11 ret=16
<4>[ 49.453256] pad_get_psp val->intval=Not charging ret=c0
<6>[ 49.594574] tegra-otg tegra-otg: PERIPHERAL --> SUSPEND
<6>[ 49.594588] tegra_vbus_session turn VBUS state from on to off
<6>[ 49.594621] reset_config : usb reset config wake unlock --
<6>[ 49.594674] The USB/AC cable is disconnected.
<4>[ 49.594683] ========================================================
<4>[ 49.594688] battery_callback usb_cable_state =0
<4>[ 49.594692] ========================================================
<6>[ 49.594756] android_work: sent uevent USB_STATE=DISCONNECTED
<6>[ 49.594915] adb_release
<6>[ 49.595016] adb_open(adbd)
<6>[ 49.595025] adb_bind_config
<5>[ 49.643735] asuspec: [asuspec_work_function] 0x2 0x81 0x31 0xff
<5>[ 50.452108] asuspec: [asuspec_enter_s3_work_function] EC in S3
<4>[ 51.585585] battery_status_poll 120 1
<5>[ 51.585623] asuspec: [asuspec_send_ec_req] send EC_Request
<5>[ 51.651597] asuspec: [asuspec_work_function] 0x2 0x81 0x50 0xff
<5>[ 51.651606] asuspec: [asuspec_smi] ASUSPEC_SMI_HANDSHAKING
<4>[ 51.858274] pad_get_psp val->intval=Not charging ret=c0
<4>[ 51.872332] pad_get_psp voltage_now =7162
<4>[ 51.879797] pad_get_capacity val->intval=11 ret=16
<4>[ 51.882624] pad_get_psp batttery temperature=327
<6>[ 51.968182] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
<6>[ 52.181335] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
<6>[ 52.322921] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts:
<6>[ 52.871988] tegra-otg tegra-otg: SUSPEND --> PERIPHERAL
<6>[ 52.872060] tegra_vbus_session turn VBUS state from off to on
<5>[ 52.907316] asuspec: [asuspec_enter_s3_work_function] EC in S3
<5>[ 52.935728] asuspec: [asuspec_work_function] 0x2 0x81 0x31 0xff
<6>[ 53.036568] detected SDP port
<6>[ 53.036615] The USB cable is connected (0.5A)
<4>[ 53.036653] ========================================================
<4>[ 53.036675] battery_callback usb_cable_state =1
<4>[ 53.036690] ========================================================
<6>[ 53.154829] android_work: did not send uevent (0 0 (null))
<6>[ 53.281342] android_work: sent uevent USB_STATE=CONNECTED
<6>[ 53.297878] set_config : usb set config wake lock ++
<6>[ 53.297941] android_usb gadget: high speed config #1: android
<6>[ 53.298316] android_work: sent uevent USB_STATE=CONFIGURED
<5>[ 53.705097] asuspec: [asuspec_send_ec_req] send EC_Request
<5>[ 53.763167] asuspec: [asuspec_work_function] 0x2 0x81 0x50 0xff
<5>[ 53.763178] asuspec: [asuspec_smi] ASUSPEC_SMI_HANDSHAKING
<4>[ 54.024995] pad_get_capacity val->intval=11 ret=16
<4>[ 54.040783] pad_get_psp val->intval=Not charging ret=c0
<4>[ 54.145992] cpu ext_temperature=44
<4>[ 55.035758] battery_status_poll 120 1
<5>[ 55.036131] asuspec: [asuspec_send_ec_req] send EC_Request
<5>[ 55.053045] asuspec: [asuspec_enter_s3_work_function] EC in S3
<5>[ 55.102744] asuspec: [asuspec_work_function] 0x2 0x81 0x50 0xff
<5>[ 55.102771] asuspec: [asuspec_smi] ASUSPEC_SMI_HANDSHAKING
<5>[ 55.126079] asuspec: [asuspec_work_function] 0x2 0x81 0x0 0xff
<4>[ 55.308262] pad_get_psp val->intval=Not charging ret=c0
<4>[ 55.322312] pad_get_psp voltage_now =7177
<4>[ 55.326868] pad_get_capacity val->intval=11 ret=16
<4>[ 55.331623] pad_get_psp batttery temperature=327
<5>[ 56.331774] asuspec: [asuspec_enter_s3_work_function] EC in S3
<6>[ 56.548246] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
<6>[ 56.746532] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
<6>[ 56.882291] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts:
<5>[ 58.269460] asuspec: [asuspec_send_ec_req] send EC_Request
<5>[ 58.343206] asuspec: [asuspec_work_function] 0x2 0x81 0x50 0xff
<5>[ 58.343235] asuspec: [asuspec_smi] ASUSPEC_SMI_HANDSHAKING
<4>[ 58.539214] pad_get_capacity val->intval=11 ret=16
<4>[ 58.543828] pad_get_psp val->intval=Not charging ret=c0
<4>[ 59.156212] cpu ext_temperature=44
<5>[ 59.542877] asuspec: [asuspec_enter_s3_work_function] EC in S3
<6>[ 62.046336] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
<6>[ 62.316740] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
<6>[ 62.451773] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts:
<5>[ 63.747023] asuspec: [asuspec_send_ec_req] send EC_Request
<5>[ 63.820100] asuspec: [asuspec_work_function] 0x2 0x81 0x50 0xff
<5>[ 63.820127] asuspec: [asuspec_smi] ASUSPEC_SMI_HANDSHAKING
<4>[ 64.018973] pad_get_capacity val->intval=11 ret=16
<4>[ 64.023700] pad_get_psp val->intval=Not charging ret=c0
<4>[ 64.166003] cpu ext_temperature=44
<5>[ 65.021790] asuspec: [asuspec_enter_s3_work_function] EC in S3
<6>[ 66.466000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
<6>[ 66.727513] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
<6>[ 66.861980] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts:
<5>[ 68.148709] asuspec: [asuspec_send_ec_req] send EC_Request
<5>[ 68.215218] asuspec: [asuspec_work_function] 0x2 0x81 0x50 0xff
<5>[ 68.215245] asuspec: [asuspec_smi] ASUSPEC_SMI_HANDSHAKING
<4>[ 68.418478] pad_get_capacity val->intval=11 ret=16
<4>[ 68.423089] pad_get_psp val->intval=Not charging ret=c0
<4>[ 69.176246] cpu ext_temperature=44
<5>[ 69.422072] asuspec: [asuspec_enter_s3_work_function] EC in S3
<6>[ 71.936179] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
<6>[ 72.201895] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
<6>[ 72.336407] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts:
<5>[ 73.627925] asuspec: [asuspec_send_ec_req] send EC_Request
<5>[ 73.694111] asuspec: [asuspec_work_function] 0x2 0x81 0x50 0xff
<5>[ 73.694139] asuspec: [asuspec_smi] ASUSPEC_SMI_HANDSHAKING
<4>[ 73.898595] pad_get_capacity val->intval=11 ret=16
<4>[ 73.903101] pad_get_psp val->intval=Not charging ret=c0
<4>[ 74.186215] cpu ext_temperature=44
<5>[ 74.902052] asuspec: [asuspec_enter_s3_work_function] EC in S3
<6>[ 77.332158] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
<6>[ 77.597073] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
<6>[ 77.732965] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts:
<5>[ 79.063568] asuspec: [asuspec_send_ec_req] send EC_Request
<5>[ 79.131452] asuspec: [asuspec_work_function] 0x2 0x81 0x50 0xff
<5>[ 79.131481] asuspec: [asuspec_smi] ASUSPEC_SMI_HANDSHAKING
<4>[ 79.197073] cpu ext_temperature=44
<4>[ 79.329052] pad_get_capacity val->intval=11 ret=16
<4>[ 79.333697] pad_get_psp val->intval=Not charging ret=c0
<5>[ 80.331780] asuspec: [asuspec_enter_s3_work_function] EC in S3
Click to expand...
Click to collapse
I HAVE TO THANKS USER _THAT for solution.
for those how are having problems with bricked tf300t(G) here is the solution:
if you cant do
Code:
adb reboot fastboot
and stuck in the twrp loop.
do this:
Code:
adb shell hexdump -C -n 512 /dev/block/mmcblk0p3
verify if the first line is
Code:
0000000 62 6f 6f 74 2d 72 65 63 6f 76 65 72 79 00 00 00 |boot-recovery...|
just do this:
Code:
adb shell
and
Code:
dd if=/dev/zero of=/dev/block/mmcblk0p3 bs=64 count=1
althout twrp is still fuc*ed you can now boot to fastboot and repair your problem
best regards

Categories

Resources