Related
Is the seidio innocase II case still interfering with the screen protector?
Any retail stores carrying any brand name cases? (nyc)
Also anybody with actual pics of anti-glare SPs please share i currently have a mirror SP but im looking in to a anti-glare,
(anti-glare protectors make it so that people next to you arent able to see anything right?)
*If anybody wants to help me out i am undecided on a case between the innocase II or the tough case (case-mate) or the gelli case (case-mate) any actual pics of any of these cases would be greatly appreciated pros an cons also just any feedback from actual owners would be good...(i have done plenty research on these cases an im still undecided so any help would be appreciated well its not help more like suggestions thanks...)
carlost24 said:
Is the seidio innocase II case still interfering with the screen protector?
Click to expand...
Click to collapse
only slightly with mine. just a little "lifting" / bubble on the lower left edge of my screen protector. it's a great case though.
Any picture? Is that only if the SP is perfect size an covers every inch of the screen or it doesnt matter if the SP is a couple mm off the sides it still happens?
-------------------------------------
Sent via the XDA Tapatalk App
I don't know what case buy, I like this case mate too
I like this case better and I own the SI2 case
I like this case better and I own the SI2 case
Click to expand...
Click to collapse
What makes it better than the SI2?
-------------------------------------
Sent via the XDA Tapatalk App
DiGWeeD2 said:
I don't know what case buy, I like this case mate too
Click to expand...
Click to collapse
Its a great case. I wish they sold them in stores.
Anybody want to help with the other questions?
-------------------------------------
Sent via the XDA Tapatalk App
i have the seidio innocase ii that i purchased off Amazon last month. it definitely interferes with the screen protector as it's not flush with the screen edge and overlaps it by ~1mm. my BSE screen protector subsequently was stretched and scratched along the sides. following the advice from some posts on various forums, i sanded down the case's edges. now the case edge no longer rides along the screen edge. i have some bulk 3M laminate, which will be cut down, being shipped to replace my current BSE screen protector. also, in regards to any full body laminate "shields'/skins, it will definitely be a very tight squeeze w/ this Seidio case; i've had to remove mine except for the screen and the area by the trackball.
i have the seidio innocase ii that i purchased off Amazon last month. it definitely interferes with the screen protector as it's not flush with the screen edge and overlaps it by ~1mm. my BSE screen protector subsequently was stretched and scratched along the sides. following the advice from some posts on various forums, i sanded down the case's edges. now the case edge no longer rides along the screen edge. i have some bulk 3M laminate, which will be cut down, being shipped to replace my current BSE screen protector. also, in regards to any full body laminate "shields'/skins, it will definitely be a very tight squeeze w/ this Seidio case; i've had to remove mine except for the screen and the area by the trackball.
Click to expand...
Click to collapse
So if i purchase the innocase II how would i go about sanding it?, Just get some sand paper an rub against the edges? Till i see it not interfering or what?
-------------------------------------
Sent via the XDA Tapatalk App
Bought my Innocase 2 on ebay.
My screen protector from Clarivue online.
Allow the screen protector to settle for a day and then put in the Innocase.
No bubbles on mine whatsoever. Also considering I've taken the case off for like 30plus times already probably.
Does anybody know if Seidio makes cases to go over their extended batteries? I do not see one (yet) for the Nexus, but they have a banner saying to look for new and exciting accessories.
Bought my Innocase 2 on ebay.
My screen protector from Clarivue online.
Allow the screen protector to settle for a day and then put in the Innocase.
No bubbles on mine whatsoever. Also considering I've taken the case off for like 30plus times already probably.
Click to expand...
Click to collapse
But does it interfere with the SP, does it mess it up?
Anybody???
i've attached some photos of my phone and case. sorry for the poor photos as i tried to take it in macro mode w/o flash and i have no tripod. also, bear in mind that these are pictures after i had sanded the case edge.
the first pic is with the case on. i tried to highlight how the edge of case meets the screen edge. the second and third, with the case off, exhibit the Best Skin Ever screen protector and how it was affected by the case. when i put on the Seidio case initially the, ridge/rail on the case (seen in the fourth photo), scratched the protector and caused it to peel.
keep in mind, i also had a laminate on the battery cover at that point so it was a bit of a tight squeeze as the case is designed to fit the N1 very well. however, even after removing the skin from the battery cover, putting the case on/off still caused the screen protector to peel. if you're only installing the case once and don't intend to remove it frequently, i guess you this issue may not bother you. however, i wanted to remove my case (or at least slide it open) every night to charge w/ the N1 dock.
i subsequently sanded the edge of the case (4th pic). i sanded the side and posterior aspects with some sand paper. now, sliding the case on/off does not affect the screen protector and i have some new laminate being shipped to replace the current one (although it works fine).
i hope that helps!
thanks man i really appreciated.
carlost24 said:
But does it interfere with the SP, does it mess it up?
Click to expand...
Click to collapse
I already stated that I got no bubbles. And I didn't have to file!
But does it interfere with the SP, does it mess it up?
Click to expand...
Click to collapse
I already stated that I got no bubbles. And I didn't have to file!
Click to expand...
Click to collapse
Is not about the bubbles its about the edges of the screen protector on the sides people are saying the sides of the case ride up on the SP an mess it up as pictured above
I have literally done this exact process but in using cheap eBay screen covers instead of the phantomskinz bodyprotector had
vexingv said:
i have the seidio innocase ii that i purchased off Amazon last month. it definitely interferes with the screen protector as it's not flush with the screen edge and overlaps it by ~1mm. my BSE screen protector subsequently was stretched and scratched along the sides. following the advice from some posts on various forums, i sanded down the case's edges. now the case edge no longer rides along the screen edge. i have some bulk 3M laminate, which will be cut down, being shipped to replace my current BSE screen protector. also, in regards to any full body laminate "shields'/skins, it will definitely be a very tight squeeze w/ this Seidio case; i've had to remove mine except for the screen and the area by the trackball.
Click to expand...
Click to collapse
carlost24 said:
But does it interfere with the SP, does it mess it up?
Click to expand...
Click to collapse
mine made it start to peel up if you werent real careful to flex it and get it on top
stopped using mine due to it not fitting in dock
http://forum.xda-developers.com/showthread.php?t=2267412
I want that case but I have 2 concerns!
1. Should I go without a screen protector?
Comment: I don't like screen protectors cause they ALWAYS have air bubbles then that's money down the drain cause they annoy me.
2. I heard the charger port opening is small and breaks easily, also spigen is bad about replacing the border. Opinion/experience?
Comment: I understand the charger port being small for it's "slim" design but I want everybody's opinions on these two issues! Any criticism is constructive in my book!
My frame broke in about 3 weeks with CAREFUL usage and barely taking the case off. Just chucked the case and frame and went naked for now with a carbon fiber skin on the back
Sent from my SGH-M919 using xda app-developers app
My Frame was broken too.
Dont buy the neo hybrid!
Sent from my GT-I9505 using xda app-developers app
My neo hybrid Chinese knock off broke too, but I have the original for about 3 months and I'm well happy.
about the screen protector, the cheap ones indeed leave air bubbles and are crap, but I've been using the better ones on my Galaxy Nexus and now on S4 and they are really good and they don't leave greasy finger stains on the screen as much as when you don't have one on.
try this one for starters... not expensive but really good, I'm using one right now
http://goo.gl/7cCibB
I've had the Spigen Neo Hybrid since August and I have no regrets, a little chip in the plastic frame from what be an otherwise very unfortunate drop. Sorry to hear others are having issues with theirs, and I think they updated the design to make it less prone to breaking.
Broken Frame
Same problem here, broken frame after 1 month
Drake9897 said:
http://forum.xda-developers.com/showthread.php?t=2267412
I want that case but I have 2 concerns!
1. Should I go without a screen protector?
Comment: I don't like screen protectors cause they ALWAYS have air bubbles then that's money down the drain cause they annoy me.
2. I heard the charger port opening is small and breaks easily, also spigen is bad about replacing the border. Opinion/experience?
Comment: I understand the charger port being small for it's "slim" design but I want everybody's opinions on these two issues! Any criticism is constructive in my book!
Click to expand...
Click to collapse
I hate screen protectors too but they are absolutely necessary to preserve the longevity of the phone. I bought the tempered glass screen protector from Spigen Glas.TR SLIM. If it wasn't for the rounded lip around the protector you'd never think it wasn't the actual glass of the touch screen. It was the best 35 dollars I ever spent.
I have had the original Neo sine the phone came out and it is still in greta condition. I would definitely get a screen protector. I would recommend the Spigen crystal series, it is hardly even noticeable.
DO get a screen protector. I know this phone has a tough glass front, but better to be safe than sorry right? I have a Spigen crystal clears which I picked up for like $4 on amazon (it is a genuine product) and its a great screen protector.
DON'T get the hybrid, my frame broke near the USB port, the back warped and pulled away from the phone, Spigen only has a 90 warranty and ONLY if you buy it from them.
Furies said:
I hate screen protectors too but they are absolutely necessary to preserve the longevity of the phone. I bought the tempered glass screen protector from Spigen Glas.TR SLIM. If it wasn't for the rounded lip around the protector you'd never think it wasn't the actual glass of the touch screen. It was the best 35 dollars I ever spent.
Click to expand...
Click to collapse
Screen protectors are not ABSOLUTELY neccessary. It really depends on how you care for the phone.
I've never used screen protectors. I keep my phone in my front pockey, glass facing in, and the only other thing I ever keep in that pocket is money (which is made of cloth, so it's not going to hurt the phone)
I've never had a single scratch.
If I were to drop the phone or slam it into something, a screen protector isn't going to help anyway.
Now if you keep your phone in a pocket with keys, or a purse with everything else that goes into a purse, or anything like that, that's a different story. But even then a screen protector isn't going to stop your phone from getting messed up eventually. It's goign to wear out much quicker than projected.
I have the ultra thin glass screen protector -> http://www.spigen.com/brands/samsun...-glas-t-nano-slim-premium-tempered-glass.html
Cases still fit and it looks great and feels better than that.
Quick question guys, if the hybrid breaks easy recommend another case that looks just as good if you don't mind!
another question, cant he tempered glass get air bubbles and can you take it off, also do all the sensors work flawlessly?
1.) Currently using a tempered glass screen protector on mine (Which is alil bit thicker) makes the "Lip protection" non-existent. So I'd get some sort of screen protector because that lip is pretty minimal.
2.) Had that concern for myself before I bought mine, truth is..if you use the OEM Sammy cable you'd be fine. Also to put on and off the case correctly lol.
BTW: Had mine since July and its still going other than a few lil chips on the frame..
---------- Post added at 07:53 AM ---------- Previous post was at 07:47 AM ----------
Drake9897 said:
Quick question guys, if the hybrid breaks easy recommend another case that looks just as good if you don't mind!
another question, cant he tempered glass get air bubbles and can you take it off, also do all the sensors work flawlessly?
Click to expand...
Click to collapse
Ultra Thin Air for like 10$ or the Slim Armor (Be careful with the white version though, mine is starting to fade in to yellow in certain areas )
Any screen protector / Tempered glass can get air bubbles if theres dust..But for some its normal to have bubbles as they go away within like 12hours. Tempered glass are removable annnnnd all the sensors work great with mine.
I've been using the Neo Hybrid for about two months now. It fits good and snug and shows no signs of wear. The plastic bumper is a little thin around the charging port but treat it well and you'll be OK. Plus, the button extenders on the sides feel really good and "clicky", instead of mushy as some of the rubber ones do.
As far as screen protection goes, I've always used the Zagg Invisible Shield but when I bought the S4 the sales guy threw in the Bulletproof protector for free. He even applied it for me, and I wanted to shake his hand afterward. Perfect positioning, no bubbles (I mean absolutely none), and he did it in about three tenths of a second.
Sent from my SGH-M919 using XDA Premium 4 mobile app
I've never used a screen protector on ANY of my phones, never had an issue, so I don't believe in them. as far as the Neo Hybrid breaking near the charger port, I don't get how so many people break them, I remove my case once a day to switch batteries and I've never had an issue, maybe take a little care when removing the case
sent from my Galaxy S4 using Tapatalk 4
I use a glass screen protector. Maintains the glassy feel without sacrificing screen security. The neo hybrid is overhyped in my opinion. I bought it and the main thing that I did not like is how easy it was to press the power button. Without the case, the power button rarely got pressed in my pocket, but with the case on, any light tap on would push it and turn my screen on.
Ordered this off eBay and its great. Covers the whole glass on the phone and does NOT have the halo effect around the glass but only near the home button which isn't much. The borders are black to possibly hide the halo, and or parts of the glass that isn't touching the screen itself. Pictures were taken on a Nexus 5 so you know where I'm getting at.
http://www.ebay.com/itm/23154906205...49&var=530790694087&ssPageName=STRK:MEBIDX:IT
Here are the pictures. I'll post the eBay link in just a bit.
Is that the Araree brand one?
I guess its REMAX, but I don't know why OP didn't gave the link when he opened this thread.
http://www.ebay.co.uk/itm/REMAX-Bra...9?pt=LH_DefaultDomain_186&hash=item1c542b5dd3
droidhd said:
I guess its REMAX, but I don't know why OP didn't gave the link when he opened this thread.
http://www.ebay.co.uk/itm/REMAX-Bra...9?pt=LH_DefaultDomain_186&hash=item1c542b5dd3
Click to expand...
Click to collapse
Just added the link. This one doesn't seem to have a brand but they may all come from the same factory with different branding.
hii .. how does the phone fit in a case ? does the edges of the screen protector get pushed by the case ?
Is that really full cover? edge cover?
It does cover edges but i would like to see one on gold s6. Also to OP, how is around home button now?
The glass covers the entire front of the phone. The camera, proximity sensor and wraps around the home button. I haven't tested it with other cases besides the ringke slim case and it is just fine. I'm guessing it should be fine with others as well. There is no portion of the front glass exposed with this on except for this home button and the ear speaker.
Sent from my SM-G920T using Tapatalk
Does the glass stick all the way to the edges? Or is it more like my Nillkin Glass protection is?
Along the entire phones edges the glass protection will not stick all the way. It makes it look like ****.
Maybe all glass protection is like this?
corb06 said:
Does the glass stick all the way to the edges? Or is it more like my Nillkin Glass protection is?
Along the entire phones edges the glass protection will not stick all the way. It makes it look like ****.
Maybe all glass protection is like this?
Click to expand...
Click to collapse
Yes, all the way to the edge. It has a black border around the edges so if there is any halo effect, you cannot see it. I've tested it with both the Ringke Fusion and Slim case and it's not pushing the screen protector up. I imagine some cases may lift the protector.
Thanks, just ordered one.
Nillkin has an even cooler tempered glass protector, look here:
Definitely going to check this out in black
http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=1&cid=1&scid=33&id=5045&page=1
http://www.nillkin.com/uploads//2015040719354873499.jpg
I'm wondering if the Spigen Neo Hybrid and/or the Slim Armor/Tough Armor would push up this all-around protector.
How much of a lip does the Ringke Fusion/Slim have?
Great just what i was looking for!
Thanks for sharing OP
asdfvtn said:
I'm wondering if the Spigen Neo Hybrid and/or the Slim Armor/Tough Armor would push up this all-around protector.
How much of a lip does the Ringke Fusion/Slim have?
Click to expand...
Click to collapse
My guess is this will get pushed up just as much as the other full cover edge to edge screen protectors from Nikllin, UTLK, & Collreall, since it still goes to the edge of the phone. I cannot imagine this one is any thinner than the others to not cause problems.
For the Spigen Neo Hybrid, I think you are stuck with the screen protectors that only cover the screen and not to the edge, or the PET protectors.
Blooody marvellous!!
Cameron_S said:
My guess is this will get pushed up just as much as the other full cover edge to edge screen protectors from Nikllin, UTLK, & Collreall, since it still goes to the edge of the phone. I cannot imagine this one is any thinner than the others to not cause problems.
For the Spigen Neo Hybrid, I think you are stuck with the screen protectors that only cover the screen and not to the edge, or the PET protectors.
Click to expand...
Click to collapse
My guess as well. It does wrap all around the phone and the glass is edge to edge unlike others. It may lift with other protectors who have a lip around the screen. Its a great protector and wanted to share with everyone here since we are all looking for one that covers the whole front glass and this is it.
Sent from my SM-G920T using Tapatalk
I purchased a Seidio Surface and Tech Armor clear screen protectors. The problem is that the screen protector fits nearly edge to edge. The pressure from the new double insulated surface cases causes the screen protector to bubble/lift/bunch on the edge in certain places.
I used some scissors to trim the screen protector with some success.
Does anyone have a recommendation for a screen protector that fits within the edges of Seidio Surface?
Thanks.
I purchased the intelliarmor case friendly tempered glass for mine. I have a surface case on the way so I will try these in a couple days and post back.
Sent from my SM-T320 using Tapatalk
Are you speaking of film protectors right? By the way how do you like the case? Im trying to decide between the seidio surface and the speck. Are the volume buttomes or power buttons hard to press?
Must be. Unless he trimmed Tempered Glass with his scissors!
aknotts415 said:
Are you speaking of film protectors right?
Click to expand...
Click to collapse
aknotts415 said:
Are you speaking of film protectors right? By the way how do you like the case? Im trying to decide between the seidio surface and the speck. Are the volume buttomes or power buttons hard to press?
Click to expand...
Click to collapse
I have always used Seidio surfaces cases specifically because they looked good, slim, and they provided decent protection (offered a holster option).
The problem I have found after about 5 phones (Gnex (2), Moto X 2013 (2), S4 (2), and the N6) is that they actually hurt the phone. When I say hurt, they create these little scuffing marks where ever the case comes in contact with the phone. This comes from fine dust/sand and dirt that gets in between the case and phone. I had good results with my N6 as I would take the case off once a week and clean/blow the case/phone.
My Nexus 6 looks good, but not perfect after about 6 months.
I *think* Seidio is on to this effect as all the new phones have a dual TPU soft shell and hard shell. I am hopeful this fixes this issue.
Regarding the buttons, they are harder to press and not perfect. It is certainly functional and not a big issue to me. You do notice it. It doesn't bother me that much since the phone turns on by the finger sensor anyway. I really never use the power button anymore.
Raydee35 said:
I purchased the intelliarmor case friendly tempered glass for mine. I have a surface case on the way so I will try these in a couple days and post back.
Sent from my SM-T320 using Tapatalk
Click to expand...
Click to collapse
Anything to report?
bunklung said:
Anything to report?
Click to expand...
Click to collapse
The Seidio case and IntelliArmor tempered glass screen protector are a near perfect match. There is just a tiny edge between the glass and the case so you don't have to worry about the case pushing on the glass protector. The glass itself is very nice, I purchased some cheaper tempered glass protectors from Ebay and you can really see the difference. They are very clear and even though they do show fingerprints and smudges, they are way less noticeable than the cheaper protectors I bought.
So I had the similar Artech 21 case for the Note 5 which is the same people that make the Armadillo Tek case for the Note 9.
I liked the Note 5 case and built in screen protector but I was wondering about the built in screen protector on the Note 9 case since it's curved so the material is different.
Also, has anyone removed the built in screen protector and if so does it cause the phone to be loose in the case?
I'm waiting for more reviews on this case before ordering off Amazon but it looks decent.
How is the protection of the case compared to the Samsung rugged cover
interested in feedback as well.
Blues fan said:
So I had the similar Artech 21 case for the Note 5 which is the same people that make the Armadillo Tek case for the Note 9.
I liked the Note 5 case and built in screen protector but I was wondering about the built in screen protector on the Note 9 case since it's curved so the material is different.
Also, has anyone removed the built in screen protector and if so does it cause the phone to be loose in the case?
I'm waiting for more reviews on this case before ordering off Amazon but it looks decent.
How is the protection of the case compared to the Samsung rugged cover
Click to expand...
Click to collapse
The case is solid. The screen protector left much to be desired. I removed it easily and the phone still stays solidly in place. It is more protective than the Samsung rugged case but not as slim. I'd feel comfortable dropping it in the armadillo case. Here's a video review I did of it:
https://www.youtube.com/watch?v=px2roiwe7UM
I have the case as well, I honestly bought like 4 different cases for the Note 9 before I got it, and one of them being the Spigen ToughArmor case and the Armadillotek. I have to say just for protection overall, the AT is way better than the Spigen case. It protects the phone more while not being that bulky, it is slightly less comfortable to hold because of the weird design and kickstand on the back, but its way better than essentially the toothpick that's on the back of Spigen cases.
The case itself covers the front of the phone a lot better than the Spigen as well (edges are raised slightly higher, the case actually covers some of the exposed glass around the sensors and the chin of the phone). It is slightly more expensive, but I'd recommend it to anyone who's scared of dropping their phone tbh.
I didn't bother with the built in screen protector, I don't like plastic screen protectors because they're too scratch prone, but it was easy to just punch it out, remove the adhesive, and just use your own glass screen protector.
It's near perfect, but if the back didn't feel a little weird, I'd say it's a perfect case
Yea, the built in screen protectors in these cases like the Armadillo, Supcase, Youmaker, etc. don't seem really good due to the curved screen. When the galaxy had a flat screen it was fine because a different material was used.
The only think I don't like at least on the Supcase, others as well as the Artech 21 case was the port covers. Unlike the Otterbox Defender it seems over time they can crack.
Right now I use the Defender mostly due to the extra big lip and better side protection.
I might go on a case binge and order the Supcase and Youmaker though but I will for sure the punch out the screen protector. I keep nothing in my phone pocket and the lips on these cases are enough I don't have to worry about contact with the ground.
The Samsung rugged case is a very well built case though. Except I prefer something with more girth like the Otterbox Defender. The Defender makes it easier to grip and use spen.
I'm enjoying it so far. I can type and swype jus like normal, no aggravating mistypes and dead spots. Jus yesterday I was noticing that my screen had some fine scratches on it, and I might keep this plastic protector on for a while. As far as the case, I have used some similar in the past and it is very protective. I also like how it connects together. I don't have to worry if it will come apart.
grmcrkrs said:
I'm enjoying it so far. I can type and swype jus like normal, no aggravating mistypes and dead spots. Jus yesterday I was noticing that my screen had some fine scratches on it, and I might keep this plastic protector on for a while. As far as the case, I have used some similar in the past and it is very protective. I also like how it connects together. I don't have to worry if it will come apart.
Click to expand...
Click to collapse
Those marks might not be scratches but just from the spen. Just like on a naked screen you will notice the spen leaves marks. All you need to do is just wipe it off.
Either way, the screen protectors suck on these cases. Better off just popping them off and go bare. Just don't put keys in your pocket with the phone.
I ripped off the plastic screen protector and installed an edge-to-edge tempered glass one. It works great on me.
I had to rip the plastic cover off as well.
grmcrkrs said:
I had to rip the plastic cover off as well.
Click to expand...
Click to collapse
So the built in screen protector isn't really that good?
It does protect the screen. But the edges don't hug the screen super tight, about 1 centimeter around or over the curve. This slight space causes me to have to press a little harder than I'm used to, and that causes mistypes and unresponsive touch, about 1/10 times when I touch that space.
grmcrkrs said:
It does protect the screen. But the edges don't hug the screen super tight, about 1 centimeter around or over the curve. This slight space causes me to have to press a little harder than I'm used to, and that causes mistypes and unresponsive touch, about 1/10 times when I touch that space.
Click to expand...
Click to collapse
did you turn on the 'touch sensitivity' ?
yes, I sure did. Like I say, 99% of the time was fine, but the edges of the screen protector, the tiny part over the curved edge, was slightly raised with an air gap. So it caused mistypes.
jinshanghaiaraol said:
I ripped off the plastic screen protector and installed an edge-to-edge tempered glass one. It works great on me.
Click to expand...
Click to collapse
I did too, I have the white glass dome. Hehe
Majin101 said:
I did too, I have the white glass dome. Hehe
Click to expand...
Click to collapse
The whitestone glass screen protector is great.
all screen protector sucks! Only use Whitestone tempered glass screen protector for noW
This case is a monster when you use the glass SP with it !
I have a armadillo tek case and i think it sucks
The screen protector is a piece of **** and they told me up front to rip it off, and also the headphone jack and charger jack covers wont stay closed and they told me tough **** to that one.
Also the charger port is too small to allow the samsung usb on the go port to be inserted