Quick question about gbcoid. I have a save file for m my old One X. Since it was replaced I copied all my save files back over, but gbcoid cannot load them. It shows in the menu, but when I click on it to load it doesn't actually load. Just continues with the current emulation. Both the rom and the emulator apk are identical from the old phone so the only difference is the phone itself.
Anyone have any suggestions on how to fix and let me load my old save games. I need my Pokemon fix without having to go back through it!
Thanks all,
Related
ok i found out what it is we need to do to use save files from other emulators or dexdrive saves on our evo's.
1st. there are many dexdrive saves located at http://www.gamefaqs.com. goto the ps1 list, select your game and then goto the tab "saves". dexdrive saves are full dumps of ps1 memory cards. these files are in .gme format and we need to convert them over to .mcr format.
then download this http://www.aldostools.org/memoryconverter.zip. it is a memory card file converter. it will not run in windows 7 64 for me. i ran it in a xp virtual machine that i have built and it worked just fine. other os's i have no clue about. when you run it, it asks you for the memeory card file. use the .gme file and then hit convert. it defaults to saving it as a bleem save game but if u click the drop down menu and select the top .mcr file, epsxe i think, and then click finished.
now connect your phone to the pc and toggel usb. go the the .psx4droid directory and copy your files here. i had allready made a save game and just renamed the new one to the one i allready had.
Dude you're the man! Thanks, this is exactly the information I was looking for. The program I used was different from yours: http://moberg-dybdal.dk/psxge/
It works on windows 7, though I can't make it save more than 1 save per memory card, so I use card 2 for the dexdrive save. Also, it saves it as a different format, I think ".mcd" but I just renamed the file "mem0002.mcr" or whatever that stock name was, and it works just fine.
Thanks again bro! The psx4droid's usefulness has definitely gone up big time!
PS save states to PSX4droid save states
This is great to use with Memory cards but I was trying to find a work around for some games which freeze at the start screen.
I was hoping to take the .psv save state I can get from a pre loaded Metal Gear Solid and then convert it to the same type of save state in psx4droid and do a quick load and see if I can skip the title screen thus enabling me to play the game from where the save state left off.
The load option freezes in MGS as well so my memory card save from my PC psx emulator does not do me any good.
Oddly enough the disc 2 seems to work fine at the menu to start and load a new game...problem being it asks you to insert disc 2 and then you are screwed. I am going to try and convert a disc 2 save of MGS and see if I can load disc 2 on my Nexus one.
I have the same problem with Parasite Eve 2 freezes as soon as it boots.
this thread is the best thing that i have ever found. i was searching how to do this all over the internet, and it was right here all along. thanks fellas!
edit: does anyone know how to change the block number of the saved games?
Hey everyone. I was playing some games on VBA (gameboy advance emulator) on my PC. About halfway through the game I saved the game (.sav file) and transferred it to my Xperia Play so I could continue on gameboid.
The import worked great and I was able to play while traveling. Problem is now I want to switch back to the PC and gameboid wont save my game (battery save) - it will only save using a save state.
I cant find any way to load the save state in any emulators on the PC. I read on a couple places that you couldnt battery save using the lite version of gameboid. So I checked to see if I downloaded the wrong one. Looks like I didnt - Gameboid 2.4.7. I obtained it via a QR code from the developer's site since it isnt on the marketplace anymore.
Any ideas here?
Fix
I had a similar issue using an emulator as well. It happens when you try to use a save from a different device. I found out that you need to fix the permissions if you do this. Basically it works like this:
- [Device One] You install the emulator, load a rom, and save your data.
- Copy the .sav to [Device Two] load a rom, then save OVER that .sav
- Copy the .sav BACK to [Device One] load rom, load save (works fine) but overwriting doesn't work.
when this happens you need to set the permissions of the .sav, and of the folders that contain it and it will work fine again.
Hope this helps.
GemRB. Has anyone heard of this or managed to get it to work on the Kindle Fire? I first ran into this on my Moto Atrix, and was able to get it to work, but haven't yet attempted it on Kindle yet. For anyone that doesn't know, this is the Baldur's Gate/Icewind Dale/Planescape: Torment engine, and pretty much acts like a .exe file. The way that I got it to work on my Atrix was just to install it on my pc, then copy and paste it into a certain directory, minus the original bg.exe file. Any thoughts?
How have I never heard of this?! I am devoting all of my time to make this work starting ......now. I WILL have it! Keep this thread updated if you manage to get it to work'
Working
I managed to get it working! At least with IceWind Dale 2.
Bear with me........
1. Uninstall GemRb on your Fire
2. Reinstall Apk and choose to download ALL OPTIONS including the Baldurs Gate 2 Demo (the uninstall and reinstall may not be necessary but i did this to ensure that the .cfg file was over-written
3. As you can see the demo works flawlessly. That is tits!
4. open the directory from your kindle on your pc: app-data/gemrb .....blah blah so that the game files are showing, and move it to the side. We will be using this later.
THESE STEPS CAN BE AVOIDED IF YOU HAVE ENOUGH SPACE ON YOUR DEVICE TO OVERWRITE. I DID NOT
PLEASE NOTE: WE WANT TO OVERWRITE THE ORIGINAL GAME WITH THE FILES ON KF NOT VICE VERSA
5. Create a folder on your desktop and name it merge or chubbles or whatever you wish.
6. open the directory on your pc. with your completely installed game . Select ALL and copy it to merge folder. Have a cup of coffee.
7. select all and CUT the files from the Kindle directory to the merge folder and overwrite all files when asked. Have another cup of coffee because this takes a while with the KF transfer speeds.
8. Select all and COPY the overwritten files back onto the KF. At this point you should probably go pee from all that coffee and the transfer speeds, at least for me, are horrendous.
9. The only other steps are to modify a few settings in Gemrb.cfg. I DID NOT change any of the pathing or directory lookup, just the Name and initials of the game (iwd2)
This should work for the other infinity engine games, although I have yet to try them. Icewind Dale 1&2 were the only games that I did not complete in my formative years.
Hi all, as you may see by my info, I am a new forumer. I have been stumped on this question the last few days though. How would I trade Pokemon from the Gameboid emulator. So I come across tutorials teaching one how to trade, but it never seems to work for me. I would like to know how to at least convert my .sav file to work for vba link or TGB Dual. Thanks for any answers.
I would also like to know how to do that, has anyone been fortunate to convert a gameboid file into a format where the file can be played on the PC?
Please answer.
Hi guys!
Converting the Gameboid file to work on the VBA emulator is quite (very) simple.
@Firefrazed : I'm not sure about the TGB Dual emu, but I'm guessing it's similar to VBA in terms of where the sav files are placed.
1. Save the Pokemon Game in-game, as in Select>Save.
2. Go to My Files in your phone (phone SD Card directory, I'm assuming its there) and search in the Gameboid folder for the XXXXX.sav file (with the XXXXX being the name of your game.
3. Use bluetooth or some SD card reader to copy and transfer this file to your PC.
4. In your PC, navigate to "Battery Saves" (for VBA).
5. Replace the current XXXXX.sav file with the one you obtained from your phone, or if you haven't save a game on the VBA yet, ignore this step and just paste your phone's XXXXX.sav in the "Battery Saves" folder.
As for the VBA-Link issue, have you checked this out yet? http://www.youtube.com/watch?v=QnZusVRiDfk
And you're done! Hope this helped!
Cheers!
Cheers, zephyrsurreal.
I never actually thought about using Battery saves.
hi there! i have a similar problem, so i thougt i post it here:
i have been using the gameboid emulator to play pokemon (ahh childhood memories ). but the problem is: i put the rom into a dropbox folder, so everytime i navigated to the dropbbox folder, clicked on the rom (its a .zip file) and chose open with gameboid. i save the game via gameboid.
now i want to trade pokemon, so i needed the save game to transfer it on my pc. but the problem: there is no save game in the dropbox folder and there is also no folder on the sd card that would have the save game in it.
i tried saving the game in game, this generated a .sav file in the folder on my sd card (where the gameboid bios file is) but when i use this save game its not working on the pc emulator (using VBA).
i think this has something to do with playing out of dropbox... any help would be greatly appeciated...
ps: i also tried to import the .sav file via battery save, but i did not work, it loaded correctly but it started the game, as there was no savegame at all (right from the beginning)
Hi there Sir Schwanzelot!!!
I just read and i thik you can resolve the problem with this:
type-Flash (128KB) then on VBA i go to Options-Emulator-Save type-Flash 128 KB then go to File-Import-and click on the file your phone made with your saved game and it will usually say something like the internal battery is dry but should still load your game.
I had the same problem, and with that...i resolve it .
I hope it works to you...
Bump
So I'm playing Leaf Green and Fire Red. I managed to trade my Ivysaur from Leaf Green to my Fire Red save. How do I get that save to work on my phone because VBA saves it as a different file I do believe so Gameboid doesn't find it.
Thanks guys, these have been really helpful. However, I still not have gotten this to work. I set Gameboid to save at Flash 128K and set VBA to do the same. I take the .sav file from the sd card on my phone and copy it over to my PC (I don't see a battery saves file anywhere so I put it in the same folder the .GBA file is in). I go to import it as a battery file and it says "Importing a snapshot file will erase any saved games and reset the emulator. Are you sure you want to continue?" I hit yes and it loads the game up from the start. Any help would be greatly appreciated.
I have a problem too. I've never had this problem before, but my Gameboid battery save file is being stubborn and staying at 32K. I do the usual thing of saving in the game while the emulator settings are at Flash 128K, but the battery save file is at 32K which doesn't allow me to use it on VBA at all. I've tried using other save types on Gameboid such as SRAM and Automatic and all the other save type options it gives, but the battery save file is always stuck at 32K. Even still, I hoped and tried every single type of save file option on Gameboid with VBA. I tried importing the battery save on VBA with every single save type option that it gives. There was no way for me to open the 32K battery save file. So can someone help me figure out how to make a battery save that's 64K or 128K?? It would be greatly appreciated.
The game I'm trying to save at 64K or 128K is Megaman Battle Network 6: Cybeast Gregar. I don't use cheats or anything. I'm simply playing the game and hoping that there's a way to make it save in the game like any other normal game I've played. At least the ones that allowed me to make battery saves that is..
Silvermoon1k said:
I have a problem too. I've never had this problem before, but my Gameboid battery save file is being stubborn and staying at 32K. I do the usual thing of saving in the game while the emulator settings are at Flash 128K, but the battery save file is at 32K which doesn't allow me to use it on VBA at all. I've tried using other save types on Gameboid such as SRAM and Automatic and all the other save type options it gives, but the battery save file is always stuck at 32K. Even still, I hoped and tried every single type of save file option on Gameboid with VBA. I tried importing the battery save on VBA with every single save type option that it gives. There was no way for me to open the 32K battery save file. So can someone help me figure out how to make a battery save that's 64K or 128K?? It would be greatly appreciated.
The game I'm trying to save at 64K or 128K is Megaman Battle Network 6: Cybeast Gregar. I don't use cheats or anything. I'm simply playing the game and hoping that there's a way to make it save in the game like any other normal game I've played. At least the ones that allowed me to make battery saves that is..
Click to expand...
Click to collapse
I have played pokemon on vba on pc and would like to play with the same save on android. how can I do it?
Suarezian said:
I have played pokemon on vba on pc and would like to play with the same save on android. how can I do it?
Click to expand...
Click to collapse
Same problem here. I wasn't to move my VBA save from PC to gameboid and wise versa. It doesn't work. I checked. Gameboid says file is corrupted and was deleted.
ibex333 said:
Same problem here. I wasn't to move my VBA save from PC to gameboid and wise versa. It doesn't work. I checked. Gameboid says file is corrupted and was deleted.
Click to expand...
Click to collapse
haha dude. u are replying to a 6 months earlier post. anyways, i got it to work!
More questions on Gameboid to VBA combatability
Suarezian said:
haha dude. u are replying to a 6 months earlier post. anyways, i got it to work!
Click to expand...
Click to collapse
Ok. How did you get it to work?
---------- Post added at 08:15 PM ---------- Previous post was at 07:59 PM ----------
Brettbesa said:
Thanks guys, these have been really helpful. However, I still not have gotten this to work. I set Gameboid to save at Flash 128K and set VBA to do the same. I take the .sav file from the sd card on my phone and copy it over to my PC (I don't see a battery saves file anywhere so I put it in the same folder the .GBA file is in). I go to import it as a battery file and it says "Importing a snapshot file will erase any saved games and reset the emulator. Are you sure you want to continue?" I hit yes and it loads the game up from the start. Any help would be greatly appreciated.
Click to expand...
Click to collapse
This describes my issue and troubleshooting steps exactly. Although I would like to clarify: "I hit yes and it BEGINS the game from the start (as in the very beginning opening scene and button descriptions".
---------- Post added at 08:28 PM ---------- Previous post was at 08:15 PM ----------
Voltron1 said:
Ok. How did you get it to work?
---------- Post added at 08:15 PM ---------- Previous post was at 07:59 PM ----------
This describes my issue and troubleshooting steps exactly. Although I would like to clarify: "I hit yes and it BEGINS the game from the start (as in the very beginning opening scene and button descriptions".
Click to expand...
Click to collapse
And update to anyone else who comes along. I solved my issues of GameBoid Advance to VBA by using VBA 1.72 instead of 1.8. I haven't gotten to actually trading anything yet. But now at least my save file from GBA (on my android phone) loads on VBA (on my PC).
Unless I post more, assume the trading worked as well.
Hi! I'm new to all of this, and just recently started flashing ROMs to my phone (Samsung Infuse) and GTablet.
With the GTab, I was unable to play a few games, like Sims Free Play, and that was fixed by changing the screen density. But for O&C I'm reading things like changing the device ID (how do I do that?), downloading the full game to pc and transferring to my tab (which would be fine if I could find a place to download it).. so I don't know what to do.
Does anybody have a definitive answer, or at least an educated guess, on how to make this work on my GTab?
By the way, I actually paid for this game on my Infuse, and it seems to work fine there.
(most impossible captchas ever.)
What this means is you have to edit your build.prop to make your device appear on the market as something else. This can be done with a build.prop editor, or in root explorer. Do a search for build.prop editing, and I think if you find the settings to make it look like a google nexus it will work.
As far as copying from PC, you dont need that. you need to copy all your files related to the game from your infuse to your gtab. these will be located in sdcard/data/"com.yourgame.something" and should be placed in the same area on your gtab, just copy the entire "com.yourgame.something" folder.
You can use appmonster or Tibackup to copy and install the apk first, then install it, then do the above procedure. report back.
redeyedjedi said:
What this means is you have to edit your build.prop to make your device appear on the market as something else. This can be done with a build.prop editor, or in root explorer. Do a search for build.prop editing, and I think if you find the settings to make it look like a google nexus it will work.
As far as copying from PC, you dont need that. you need to copy all your files related to the game from your infuse to your gtab. these will be located in sdcard/data/"com.yourgame.something" and should be placed in the same area on your gtab, just copy the entire "com.yourgame.something" folder.
You can use appmonster or Tibackup to copy and install the apk first, then install it, then do the above procedure. report back.
Click to expand...
Click to collapse
I guess my next question would be... can I connect my Infuse directly to my Gtab via USB?
joeygambino said:
I guess my next question would be... can I connect my Infuse directly to my Gtab via USB?
Click to expand...
Click to collapse
Yes. Use the same cable you'd use to connect the Infuse to a PC. Use the full-sized USB port behind the door on the gTab. May need to go to Settings->Storage to mount the SD card. The path it mounts to will vary from ROM to ROM. Look for /usbcard or /mnt/usbcard or something similar.
I just did this with my G2 to copy over some files.
GinoAMelone said:
Yes. Use the same cable you'd use to connect the Infuse to a PC. Use the full-sized USB port behind the door on the gTab. May need to go to Settings->Storage to mount the SD card. The path it mounts to will vary from ROM to ROM. Look for /usbcard or /mnt/usbcard or something similar.
I just did this with my G2 to copy over some files.
Click to expand...
Click to collapse
Got it! So far anyway. I edited build.prop file so ro.product.model=Nexus S, and now O&C is downloading updated files. Before this it didn't get past telling me it couldn't identify my device. Next step is to see if it will work once updated. Thank you all!
Glad you got it working. FOr the community's benefit, would you post the name of the ROM you're using on GTAB and the name of the company that produces the game? This way anyone with the same problem can find this thread in a search.