[Q] Re-Install ICS - Motorola Atrix 2

Hi, I recently bought an Atrix 2 MB865 (NON AT&T) and inmedietly update it via OTA to ICS 4.0.4 Version: 672.1.18.MB865.MERetail.en.06
It works but sometimes lags a little bit, so I want to know if it is posible to reinstall ICS.
Sorry for my english.
Thanks for everthing!.

alrojas said:
Hi, I recently bought an Atrix 2 MB865 (NON AT&T) and inmedietly update it via OTA to ICS 4.0.4 Version: 672.1.18.MB865.MERetail.en.06
It works but sometimes lags a little bit, so I want to know if it is posible to reinstall ICS.
Sorry for my english.
Thanks for everthing!.
Click to expand...
Click to collapse
Well instead of reinstalling ics, try a factory reset which would delete ur apps and everything excpet ur stuff stored in sd card. So be sure to backup what u need
Or u can root ur phone, install a recovery and flash a custom rom

alrojas said:
Hi, I recently bought an Atrix 2 MB865 (NON AT&T) and inmedietly update it via OTA to ICS 4.0.4 Version: 672.1.18.MB865.MERetail.en.06
It works but sometimes lags a little bit, so I want to know if it is posible to reinstall ICS.
Sorry for my english.
Thanks for everthing!.
Click to expand...
Click to collapse
go to custom rom or try flash jelly bean 4.1.2 leak # 1 its pretty stable..but now i used jb 4.2.2 from paranoidandroid..just go to develop forum...
mb865 jb 4.2.2 paranoidAndroid

Try some jb ROMs as said above! They are hell lotta better than ics! ( with since bugs though)

Related

[Q] going to cm10 from Jellybean Hydro?

Hey guys,
I used to run cm10 nightlies on my tf300 but have lately been running Jellybean Hydro. I have been dissatisfied with the performance of my tablet and want to try cm10 again now that it is in stable release. Back when I was installing Hydro I read that once I install the Jellybean stock firmware for Hydro I am stuck running roms with stock firmware or at least it will be hard to run non stock roms...?
Is it possible for me to go from my current state to cm10? Are there any extra steps I need if it's possible?
Thank you in advance for any information!
cm10 JB compatible
Blackdrag said:
Hey guys,
I used to run cm10 nightlies on my tf300 but have lately been running Jellybean Hydro. I have been dissatisfied with the performance of my tablet and want to try cm10 again now that it is in stable release. Back when I was installing Hydro I read that once I install the Jellybean stock firmware for Hydro I am stuck running roms with stock firmware or at least it will be hard to run non stock roms...?
Is it possible for me to go from my current state to cm10? Are there any extra steps I need if it's possible?
Thank you in advance for any information!
Click to expand...
Click to collapse
Back up apps with titanium backup, nand backup, full wipe recommended. Flash CM 10 Flash Gapps, reboot, restore titanium profit.
Data wipe is almost no brainer if you ask me if you're moving to different ROM
You can use titanium backup to backup your apps and data but please don't restore system apps because those can cause problems
Sent from my Galaxy Nexus using xda app-developers app
Blackdrag said:
Hey guys,
I used to run cm10 nightlies on my tf300 but have lately been running Jellybean Hydro. I have been dissatisfied with the performance of my tablet and want to try cm10 again now that it is in stable release. Back when I was installing Hydro I read that once I install the Jellybean stock firmware for Hydro I am stuck running roms with stock firmware or at least it will be hard to run non stock roms...?
Is it possible for me to go from my current state to cm10? Are there any extra steps I need if it's possible?
Thank you in advance for any information!
Click to expand...
Click to collapse
The info provided above is good!
The info about jb stock roms relates to the bootloader. The roms we use here are either for jb or ics bootloader and in general if you maintain the correct bootloader you are good. That said, always read the op about how to install for your own safety and piece of mind unless told otherwise.

Rsd and ota flash!!!

I have some doubts:
If I install JB by RSD I could update VIA by OTA IN NEXT UPDATE or nevermore?
The JB has problems with games? ( ghost tracer)
and last if I can back to ICS its possible or not?
Thx for answers!!! :good:
nobody???
landeiro said:
I have some doubts:
If I install JB by RSD I could update VIA by OTA IN NEXT UPDATE or nevermore?
The JB has problems with games? ( ghost tracer)
and last if I can back to ICS its possible or not?
Thx for answers!!! :good:
Click to expand...
Click to collapse
1. As long as you are flashing the release JB you should have no issues. If you are using anything like "Safestrap", you will have issues and will need to gop back to a stock recovery.
On the HD devices going back to ICS is as simple as a flash.

[Q] Revert CM10 - ICS ROM

Hey guys.
I am using the latest nightly version of CM10 on my Lg p920 but would like to use the 3d again. So I want to install ICS and use the custom xperia rom.
I got the V28B KDZ file from here that I can apparantly flash with the BC2tool from here.
Now my question is, Is this the only action to do ? Just flash the KDZ and everything is fine ? Or do I still need to do preparations before this since I am now using cm 10
specs :
Android 4.1.2
Kernel 3.0.21-cm+
Smallband LgP920AT - 00 - V21b- eurp
( so I am on android 4.1.2, but not really...)
Thanks guys, Lots of usefull stuff in here that has helped me already ;D
M1xelated said:
Hey guys.
I am using the latest nightly version of CM10 on my Lg p920 but would like to use the 3d again. So I want to install ICS and use the custom xperia rom.
I got the V28B KDZ file from here that I can apparantly flash with the BC2tool from here.
Now my question is, Is this the only action to do ? Just flash the KDZ and everything is fine ? Or do I still need to do preparations before this since I am now using cm 10
specs :
Android 4.1.2
Kernel 3.0.21-cm+
Smallband LgP920AT - 00 - V21b- eurp
( so I am on android 4.1.2, but not really...)
Thanks guys, Lots of usefull stuff in here that has helped me already ;D
Click to expand...
Click to collapse
Yeah, go on.
Just backup your internal SD on your computer because you will loose everything on it.
GlossGhost said:
Yeah, go on.
Just backup your internal SD on your computer because you will loose everything on it.
Click to expand...
Click to collapse
oh thanks, so that went smooth, only the factory settings were hard to get to because its the home button + down instead of 3d+down.
But since google is my friend

[Q] BMM compatible MIUI Rom?

I just want to make a sincere request to all our developers.
Would it be possible to port MIUI ROM such that it can be installed in partitions other than 1. Like the ROMs we already have.
Currently I've JB Leak 1 installed in System 1 and I want to keep it as it is.
Thanks.
Miui v4 and 5 both bmm compatible.. U need to check the development thread..
Sent from my ME865 using XDA Premium 4 mobile app
I understand what you are trying to say. But my concern is, for MIUI, we need to install it over official JB leak 3. And we cannot install official jb leaks on any other partitions. So how will I install MIUI on other partitions? Can't we have a KEXEC type ROM which can be installed just like all other ROMs??
IAMAB said:
I understand what you are trying to say. But my concern is, for MIUI, we need to install it over official JB leak 3. And we cannot install official jb leaks on any other partitions. So how will I install MIUI on other partitions? Can't we have a KEXEC type ROM which can be installed just like all other ROMs??
Click to expand...
Click to collapse
Make a backup of the jb leak 3 via BMM and then restore it on another system then flash miui on top of that. :thumbup:
If I had a dollar for every time I said that, I'd be making money in a very weird way.
IAMAB said:
I just want to make a sincere request to all our developers.
Would it be possible to port MIUI ROM such that it can be installed in partitions other than 1. Like the ROMs we already have.
Currently I've JB Leak 1 installed in System 1 and I want to keep it as it is.
Thanks.
Click to expand...
Click to collapse
I have MIUI on my system 4 it shouldn't be a problem
Use this link if your on the Asia or ME865 http://forum.xda-developers.com/showthread.php?t=2362411 (its got nightly updates)
For AT&T model use this one which i use its from some Chinese website translated in this forum (It requires a BMM compatible patch that you need to zip )
http://forum.xda-developers.com/showthread.php?t=2259993
Have fun.........:laugh:
darth_nihar said:
I have MIUI on my system 4 it shouldn't be a problem
Use this link if your on the Asia or ME865 http://forum.xda-developers.com/showthread.php?t=2362411 (its got nightly updates)
For AT&T model use this one which i use its from some Chinese website translated in this forum (It requires a BMM compatible patch that you need to zip )
http://forum.xda-developers.com/showthread.php?t=2259993
Have fun.........:laugh:
Click to expand...
Click to collapse
How did you manage to install jb leak in system 4? I guess official jb leak can installed only via RSD lite.. Sorry if I'm being silly.. m
IAMAB said:
How did you manage to install jb leak in system 4? I guess official jb leak can installed only via RSD lite.. Sorry if I'm being silly.. m
Click to expand...
Click to collapse
Make a nandroid backup of jb leak from system 1 and restore it to system 4.
Sent from my Calculator
IAMAB said:
How did you manage to install jb leak in system 4? I guess official jb leak can installed only via RSD lite.. Sorry if I'm being silly.. m
Click to expand...
Click to collapse
I dont have the jb leak on system 4 i have MIUI on it i don use the official leak btw not a big fan of it lol.......:silly:
gaurav.das said:
Make a nandroid backup of jb leak from system 1 and restore it to system 4.
Sent from my Calculator
Click to expand...
Click to collapse
+1 hahaha!!
1BadWolf said:
Make a backup of the jb leak 3 via BMM and then restore it on another system then flash miui on top of that. :thumbup:
If I had a dollar for every time I said that, I'd be making money in a very weird way.
Click to expand...
Click to collapse
If I had a dollar for every time I said that, I'd be making money in a very weird way.

sim card fix now i have a casual root question

i did it cuz my fone was not able to recieve calls ..now im on 4.0 keeps bugging me for update so i jst put differ to 1pm today .. can i update a 4.2 firmware and still be able to root and flash custom stuff ..im going to be out of town so hope i can find a verizon store not a retail one
twistedillutions said:
i did it cuz my fone was not able to recieve calls ..now im on 4.0 keeps bugging me for update so i jst put differ to 1pm today .. can i update a 4.2 firmware and still be able to root and flash custom stuff ..im going to be out of town so hope i can find a verizon store not a retail one
Click to expand...
Click to collapse
Only 4.3 where you only can root that's it because it locked the bootloader, anything else you can root/flash custom rom/kernel/recovery.
buhohitr said:
Only 4.3 where you only can root that's it because it locked the bootloader, anything else you can root/flash custom rom/kernel/recovery.
Click to expand...
Click to collapse
SIM card fix
Since im 4.0 im gonna use casual root..to wat firmare does it take me to 4.2.2?? After casual root if its not a 4.2.2 can I still flash a 4.3 or KK Rom ??
twistedillutions said:
SIM card fix
Since im 4.0 im gonna use casual root..to wat firmare does it take me to 4.2.2?? After casual root if its not a 4.2.2 can I still flash a 4.3 or KK Rom ??
Click to expand...
Click to collapse
What was your previous full rom before you roll back to 4.0 (ICS)? Once you on one of these JB ROM: 4.1/, 4.1.2/ or 4.2.2 you can flash any custom or modded rom.(4.3 or 4.4 custom rom).
buhohitr said:
What was your previous full rom before you roll back to 4.0 (ICS)? Once you on one of these JB ROM: 4.1/, 4.1.2/ or 4.2.2 you can flash any custom or modded rom.(4.3 or 4.4 custom rom).
Click to expand...
Click to collapse
I was originally 4.2.2 before I enter the wonderfully world of rooting n flashing. Do u recomend flashing a backup file or clean install?
twistedillutions said:
I was originally 4.2.2 before I enter the wonderfully world of rooting n flashing. Do u recomend flashing a backup file or clean install?
Click to expand...
Click to collapse
I always do clean install, cure a lot of future glitches later!!
buhohitr said:
I always do clean install, cure a lot of future glitches later!!
Click to expand...
Click to collapse
Thnx for the help ..stock and I arent dancing well

Categories

Resources