Related
I bought an used infuse the other day to fix and sell to a friend. The owner said it was bricked, but I've since gotten it into recovery mode, download mode, and a normal power on. It goes into a bootloop most of the time though, the endless bootloop people seem to be getting when the power button gets stuck.
I've completely disassembled the phone and I can't find the problem. The power button (the white one on the inside) moves completely freely. I've tried booting up the phone with the back housing off so the power button is bare but it still bootlooped. The only way I can get it to boot up is to repeatedly hit the back of the phone onto my hand as its booting up. Even then, the phone will only stay on for 30 seconds or so once it boots. I've read of people fixing this by simply throwing the phone on the ground, but is there a better way to fix this? What could be the problem?
Edit: I think I may try this: http://forum.xda-developers.com/showthread.php?t=2235435&highlight=bootloop
It could be a weak connection on the mobo somewhere.
Edit 2: Yep! I re-soldered the connection around the power button on the back of the motherboard and the phone is working. Got it reset and now I'm running it without the second power button thing in the case.
Hello, I am in need of some dire assistance. I purchased a Verizon Galaxy S3, the phone itself works fine, but it does some kinda funky stuff from time to time. Like if I push the power button, and I unlock the screen, sometimes the screen will turn black and I have to turn it on again, then I fight it a few time to finally unlock the phone. Something similar happens when trying to shut the screen off manually. If I use the button the screen will turn off for a second then turn back on. I fight it but I normally end up just letting the screen time itself out.
I was hoping to root it and try a custom rom, hoping the issues were stemming from a crappy verizon rom. I downloaded all the drivers and the Odin files. I am very familiar with Odin and rooting, I have approximately 12 android devices rooted at the moment most of them samsung, some lg, etc.
I am in the process of trying to get my device in Odin mode, this is where things get REALLY funky! I power the device down, it kind of just vibrates for a while, then it turns itself back on. Well alright, I pulled the battery, I insert the battery, the phone powers itself on. Well okay then, So I pull the battery, put my fingers on the volume down and the home key, slide the battery, and it boots into Download Mode. SWEET VICTORY FINALLY, just gotta push the volume down key to activa... Wait, the screen just went black, and the phone vibrates about every 10 seconds or so. So I pull the battery and try again, only this tie I push the button and get into Odin mode, I see it loading it it's complete I grab my usb cable, and the phone screen goes black and the phone vibrates.
So I have been fighting this for over an hour now and I'm ready to admit defeat unless one of you can help me out and tell me what has possessed this phone and what I can do to free it?
Yes, I did search, I have been searching, frantically, and I will continue to, I have not found anything useful yet
Sounds like a hardware problem. Most likely your power button is sticking. Try hitting it gently against a table corner or something.
Thanks, I don't like the idea of gently tapping my device against a table :/ but I will give it a shot. The plastic button that sticks out the the bezel comes back after being pressed. However I think you are right about the button, it seems a little hyper sensitive.
I had no luck tapping it against a table. I can feel the button click in and i can feel it release
Hi Everyone,
I'm have a problem with my One XL. It's an Australian Telstra item. I got soaked in the rain and the phone got wet. I put it in rice for a few days to soak up the moisture, then charged it up. After this the screen backlight would intermittently fail, and i noticed if I squeezed the LHS of the phone it would sometimes make the screen go on or off. The problem got worse over the space of about an hour and eventually the screen would not come on. I opened up the case, and noticed there was a split in the ribbon cable that is part of the screen at the point that it is folded over 90deg (I'm not sure why this was never a problem before the phone got wet?)
So I stupidly got straight stuck into taking it apart to replace the screen before backing up all my stuff. I ordered a new screen of ebay and replaced the old one. Now I am having the following behaviour:
1-Press and hold power button - Phone vibrates once, then does nothing. Screen doesn't come on.
2-Plug into PC - LED flashes red for a while then goes solid red. Screen doesn't come on. Nothing pops up in "My computer"
3-Press and hold (~10sec) power after 2 - Red light goes off. Phone vibrates once every ~30 seconds. Screen doesn't come on.
4-Press and hold power after 3 - Home/Back/Apps LEDs flash 20 times, no other change.
I also tried a number of combos of power + vol -/+ with no success.
Also, I was being lazy and doing this without putting the case back on, and my power button has fallen apart. It looks like that ribbon cable is only ~$5 on ebay, so no big deal, but means I cant really do anymore troubleshooting at the moment.
So I guess the big question is, can the phone still be salvaged? I'm thinking maybe it's stuck in a boot loop with the screen also not working?
Any help is greatly appreciated.
Cheers,
Chris
The first question I have would be did you make sure you got the right screen? There are three different types of screens that came on this phone and you need to make sure you match it correctly. You can identify the type of screen by the colour of the flex cable attached.
Secondly, you should never use the power + volume up button combination, I'm not sure where you saw that information but it puts the phone into Qualcomm download mode which you definitely don't want. The only button combination that should ever be used is power + volume down.
Sent from my Evita
Hi Timmaaa,
Both screens had the same orange/brown flex cables. I did read that there were different screens, but had thought there were only two and that the other had a green flex, so I definitely didn't get that one. Are the other 2 colours close?
I'm not sure where I read the power + volume up thing as I have read a heap of different threads. What would the expected behaviour be if I had put it into that mode?
Thanks for your help.
Cheers,
Chris
The three different screens have very different colour coding on the flex cable, so matching should be a piece of cake, which I believe you've done correctly. Putting the phone into Qualcomm download mode is kinda like a bricked state, if you're getting the red charging led and the cap button lights flashing I think you're ok.
Another thing to note is that you usually need to sync your new screen when you install it. From memory I believe you need to power the phone on, remove the old screen while the phone is on, and install the new screen while the phone is on. If you didn't follow this process that might be why your display isn't working. Other than that your phone might have just suffered some fatal hardware damage due to the liquid ingress, which isn't going to be fixable.
Sent from my Evita
Thanks again Timmaaa,
I had a closer look at my old screen and it does have the small green section on the flex cable which I didn't notice the first time around. Bugger.
So i disassembled it again and swapped back to the old screen. The display still doesn't turn on, but the phone itself now stays on and the computer recognises it! I'm transferring all my photos across to my computer now, then I'll try to sync it properly and see if that helps.
Cheers,
Chris
Ok so I swapped the screens back and forth with the power on, and now it's working! Thanks Timmaaa, I would never have guessed I needed to have the phone turned on in order to swap parts, seems pretty weird. Now just got to get a new power button.
Cheers,
Chris
Awesome. Glad to be able to help.
Sent from my Evita
Got a perculiar problem with the S6. The screen suddenly went black with just the blue LED blinking in the upper left hand corner of the sreen. I am assuming the phone went off completely as I cannot access it via the PC also. I have tried all possible button combinations for reset but no luck so far.
Anyone else experience this? Did you find a fix?
Sent from my SM-G920V using XDA Free mobile app
Well the phone is not off if the blue led light is blinking, I've never had it happen to me where the phone didn't come back though. I was using an app one day (YouTube I think) and the app crashed and bugged the phone out to where the screen went black but the led was blinking. I left the phone alone after several attempts of hitting home and power to get the screen to come back on and finally I think I plugged it into the charger and it kind of just fixed it self and has not happened again. This is the scary parts of not having a removable battery.
Sent From My Rooted Galaxy S6
I've got the 128GB and yes I have experienced this as well, twice! I hold down both volume buttons the home button and the power button at the same time, this will put you in maintenance mode. It'll take a couple of seconds holding those buttons but just keep them pressed. Be careful because when it does come on it comes on fast and factory reset is the second selection in that mode. The first time I did it I wiped my phone, the second time it happened I lifted my fingers fast enough not to make a selection. Give that a try and see what happens.
frostysax said:
I've got the 128GB and yes I have experienced this as well, twice! I hold down both volume buttons the home button and the power button at the same time, this will put you in maintenance mode. It'll take a couple of seconds holding those buttons but just keep them pressed. Be careful because when it does come on it comes on fast and factory reset is the second selection in that mode. The first time I did it I wiped my phone, the second time it happened I lifted my fingers fast enough not to make a selection. Give that a try and see what happens.
Click to expand...
Click to collapse
Thanks very much.
Hey guys, i really need someones help. Everything in my life runs on my phone. The phone is Samsung Galaxy Note 5. Its screen is black and there is a blue blinking light. I have tried to hold the volume down and power buttons but it didnt do anything. It doesn't respond even after plugging in.
chaudharysafi said:
Hey guys, i really need someones help. Everything in my life runs on my phone. The phone is Samsung Galaxy Note 5. Its screen is black and there is a blue blinking light. I have tried to hold the volume down and power buttons but it didnt do anything. It doesn't respond even after plugging in.
Click to expand...
Click to collapse
Sounds like you have the same problem as stated in OP. You could try doing what was recommended earlier in the thread. By the way, this is an inappropriate location to put your problem. Read the forum rules
Never rooted.
I am having the same issue. I have tried everything. Factory reset. Reboot/wiped cache and even trying to install verizon's Fireware again as it come only up to the Samsung S6 logo then goes blank. This is now my 4th replacement with Verizon and getting sick of it. How do I fix this? Odin stops at Get Pit mapping then when I do that says it can not install NAND. Using Odin 3.10.6 and 3.10.7. Tried mutli cables and restarted computer as well. This is driving me insane these phones keep doing this.
same problem except nothing comes on. no led, no reset, no computer recognition...
Same issue. Boots into and displays recovery fine and download mode. I can also bring up the safe mode menu ... just can't boot into the OS. Blue light on. I get a response in ADB when powered on, just can't enter any commands due to not being able to authorize access via phone screen.
Update:
Well as strange as it sounds, as soon as I plopped it down on the wireless charger for my S7 the screen came to life. It was at 95% battery prior to. Whatever gremlins got into the gizmos within the wireless charging apparatus seems to have caused this strange occurrence.
So today i started having bootloops, it was showing the Powered by Android screen for 2 seconds then booting again over and over for few hours
Now after it somehow got fixed by itself, i managed to turn the phone ON and to clear Cache
So far there are not bootloops anymore
BUT
huge BUT
the phone is poping the Power Menu most of the time, and then every touch on the screen just "presses" on the Shut Down option
If i press on the Power button myself it shut him down automatically ...
EDIT:
Would like to add, that i never unlocked it, it's the regular OTA version.
I doubt a wipe wll help, but i really wont mind if thats the case
Its almost like something pressing the Power button sometimes, but even WITHOUT the back case it still pops that power menu. even if no one is touching it at all it still pops it once in a while, which cause shut downs once in a while ...
So i woke up
The phone is off, i cant turn it on
I charge it for few hours already and still nothing happens the power button doesnt do nothing, it doesnt vibrate
So i connect it to my PC, it shows it as a Marshal something in the device manager but it KEEPS disconnecting and reconnecting every 2 seconds
I have found a "fix ur bricked phone" threads but they all using a tool that needs the phone connected to the PC, well my phone cant stay connected more than 5 seconds for some reason [ different cables, different computers] it keeps on popping in and out
Did you drop your phone in the water or something? Wet or damp from the rain maybe?
And did you try connecting it while in fastboot or recovery mode?
Maybe wet from Humidity but thats all
i cant reach fastboot nor recovery
as now it all black, not turning on not even for a bootloop
This problem happen when the phone is getting wet ? its certainly didn't but maybe i should "fix" it as a wet phone should be fixed? should i open it and dry it out? maybe take the battery out? its not that easy to take it out tho
I had a phone which was wet from the rain, it made the power button faulty. It would randomly turn screen on off like in your case. I took it to the repair shop and they cleaned the insides and it was fine again. If you're sure it's not the rain or anything then maybe that's not the reason, just a guess.
How about plugging in the charger? Does it light up? If it lit up and you cant turn it on after maybe its the power button problem.
elemti said:
I had a phone which was wet from the rain, it made the power button faulty. It would randomly turn screen on off like in your case. I took it to the repair shop and they cleaned the insides and it was fine again. If you're sure it's not the rain or anything then maybe that's not the reason, just a guess.
How about plugging in the charger? Does it light up? If it lit up and you cant turn it on after maybe its the power button problem.
Click to expand...
Click to collapse
plugging the charger doesnt do nothing
Although i got a portable charger with a led , the led turns on when i plug the One, BUT, the led bar doesnt decrease even after few hours, so its like "trying" to charge but not charging anything
Try this from OnePlus Customer Support:
2. Power cycle the One by holding the Power button for 20 seconds 5 times.
3. Attempt to start the phone by holding down the Power button along with the Volume down button to start recovery mode and performing a factory reset.
Click to expand...
Click to collapse
or hold Power button with the Volumn up button to see if you can get into fastboot mode.
lol bro... seriously.. you really think i didnt try that stuff before opening a thread?
I already scanned the entire web and no one with the same issue have posted a fix thread
one plus doesnt even care about their customers
Is this the guide you said you saw? http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
Why not give it a try? Follow the steps and see if you are able to unbrick your phone.
I mean there's not much you can do if you can't even turn on your device in the first place :/