Related
Hi,
I have a BB0 eeepad. So, I've tryied to change kernel, After doing that, my eeepad continue rebooting, stucking on the Eeepad first screen (before the asus logo). CWM is not accessible, if I try to power on in apx mode, the tablet does that correctly. I have installed the correct driver using your tutorial (video) but i get the following error:
rcm version 0X4
Command send failed (usb write failed)
If I try to get into CWM, i get the double icon screen, wipe data or android. If i choose wipe, it works, but the tf101 won't boot. If i choose android, the screen show me "cold booting android" and it get freezed...
Could you help me ?
Thank you
Boot into recovery, you have to press Volume UP before the option to 'wipe' or 'cold boot' comes up to get into recovery. I have a feeling you aren't doing that.
Nope, i did it, but in this case, it continues to reboot in loop... (Same as wipe data)
You have a BBO so APX mode is not gonna do anything for you.
So Vol down plus power button till you see words at top left
Immediately push Vol up within 5 sec to get into recovery.
If you wait too long you get the cold boot/wipe data option.
So you're saying even pushing Vol up within the 5 sec don't work?
baseballfanz said:
You have a BBO so APX mode is not gonna do anything for you.
So Vol down plus power button till you see words at top left
Immediately push Vol up within 5 sec to get into recovery.
If you wait too long you get the cold boot/wipe data option.
So you're saying even pushing Vol up within the 5 sec don't work?
Click to expand...
Click to collapse
Yep, Immediately Reboot over and over again...
can you or not acces to cwm? if you can your device is not fully bricked
wich version of cwm recovery do you have?
I have the same issue, I have a B70, I have CWM Version v5.5.0.4, and can access it. I can get in to APX mode, and tried the NVFlash with the hopes I was one of the lucky B70's but got the same message:
rcm version 0X4
Command send failed (usb write failed)
I can get in to the cold boot screen, but I ONLY have the wipe data option, I do not have the Android logo option. Any help would be appreciated with this... I was definitely not trying to hijack this thread, but I really didn't think it was necessary to post a new thread for the same issue.
I get stuck on the Eee Pad startup logo. I can see the tablet in Device Manager as Asus TFP Device, but cannot get ADB serial to recognize it.
If you have no recovery, and you cannot get into your ROM, and you are SBK2..hang it up, you FUBARed your tab..sell it to someone who needs some hardware maybe? Try to RMA it to Asus, who knows- and then go sign the petition to release the SBK2 and this problem would not inconvenience you or Asus any longer when this happens..
Sorry guys
magnumrt562 said:
I have the same issue, I have a B70, I have CWM Version v5.5.0.4, and can access it. I can get in to APX mode, and tried the NVFlash with the hopes I was one of the lucky B70's but got the same message:
rcm version 0X4
Command send failed (usb write failed)
I can get in to the cold boot screen, but I ONLY have the wipe data option, I do not have the Android logo option. Any help would be appreciated with this... I was definitely not trying to hijack this thread, but I really didn't think it was necessary to post a new thread for the same issue.
I get stuck on the Eee Pad startup logo. I can see the tablet in Device Manager as Asus TFP Device, but cannot get ADB serial to recognize it.
Click to expand...
Click to collapse
You need to put working adb. try with a linux livecd or whatever you can, with that version of cwm recovery you will need some commands to be able to acces a microsd card and reflash the device
I'll send to Asus... Let it try...
But no, I've no access to CWM...
Antjac said:
I'll send to Asus... Let it try...
But no, I've no access to CWM...
Click to expand...
Click to collapse
You more than likely voided your warranty by flashing or rooting your device BTW..so good luck getting Asus to cooperate (fooling them)
Unfortunatlly, i've not other choice... (except if NvFlash's team find a solution for B70+)...
Wait and see...
When I try to get adb to recognize the tablet, it runs for a second, then lists attached devices , but no serial #. It does not say no devices or anything... is there any hope I can push a rom?
magnumrt562 said:
When I try to get adb to recognize the tablet, it runs for a second, then lists attached devices , but no serial #. It does not say no devices or anything... is there any hope I can push a rom?
Click to expand...
Click to collapse
That is supposed to happen, you need to execute adb shell to get a shell or adb push file /sdcard/ to push a file to the sdcard
I have the exact same thing, upgraded to ics, all worked ok, rooted, all ok for 2 day then nothing after a reboot, cant nvflash vol+ & power doesnt find any options bar stock if i recover goes to dead android with ! then asus logo and nothing. So it seems the issue is with the upgrade but as most of us rooted we may have a problem, mind you i did the wipe and recovery so it may have erased evidence.
If anyone is selling a TF101 I would love to buy one...
I forgot my TF101 on top of the car and ran it over, still works but the housing and lcd digitizer are dead >.<
Please email or pm me if interested
Well, good news...
As I said, I've sent my TF101 to Asus (to Czech Republic). I said my Tablet was bricked by updating to the ICS rom (That's not wrong in fact...).
So no problem, they flashed my tablet and sent it back. I've received it yesterday, everything is OK
Hello guys,before with the rom hidro ponic 4.4 all was well.After i want change my rom and i've brick my asus after flash rom unofficial cm10..because the camera apk not found, and dispay is total green..I suppose the problem is the rom but after another flash rom the problem is same.On again the display is lock on the logo Asus and upstar on the little: the device unlock..stop.My asus there's no way to get it to recognize at pc and the driver installed not found..are't fastboot logo in Controll Pannel.I've not possilìbility to choce android--usb--wipe data.Help me please thank you sorry for my English
What about booting into recovery? Or fastboot?
As far as I understand your post Android isn't booting, but what if you hold volume-down when you turn on the tab?
I have almost the same problem. I flashed a bad boot blob (vanilla linux, not android) and now I'm stuck at the first Asus logo if I boot normally. But I still have fastboot and CWM recovery so I'm confident I can get it back into shape (even though a restore in CWM didn't help)
I think there's no way to unbrick the device,because I have the same problem.
I flash my device to official 4.1 and I found I lost root of my device
So I try to downgrade my device,but I failed...
Then I try to enter recovery and I failed again...
At last I try to wipe data of my device but it had no respond...
Of course,I had to reboot my device...
The result is:It bricked...
The symptom is just like the thread starter
What should I do???
I tried to contact the customer service of ASUS,but they said the device which unlocked by yourself couldn't get any warranty,even I willing to pay for it
(I think the customer service of ASUS is too bad,especially their attitude)
(I'm also sorry for my poor English...)
this is simple
download the asus jelly bean launcher.zip
from their website
unzip the launcher so its just the eepad 10.blahblah.zip
if it says update launcher you still need to extract this
then flash the twrp jelly bean recovery
now add the official jb rom to an external sd card
and flash
reboot
and voila
reboot again to fastboot and reflash recovery afterwards
and then flash root
worked for me
seanzscreams said:
this is simple
download the asus jelly bean launcher.zip
from their website
unzip the launcher so its just the eepad 10.blahblah.zip
if it says update launcher you still need to extract this
then flash the twrp jelly bean recovery
now add the official jb rom to an external sd card
and flash
reboot
and voila
reboot again to fastboot and reflash recovery afterwards
and then flash root
worked for me
Click to expand...
Click to collapse
e...Thanks anyway
But my problem(the same as the thread starter) is:I couldn't enter either fastboot nor recovery
If I could enter one of it,I think I can fix it...
(Maybe I misunderstand what you mean?)
seanzscreams said:
this is simple
download the asus jelly bean launcher.zip
from their website
unzip the launcher so its just the eepad 10.blahblah.zip
if it says update launcher you still need to extract this
then flash the twrp jelly bean recovery
now add the official jb rom to an external sd card
and flash
reboot
and voila
reboot again to fastboot and reflash recovery afterwards
and then flash root
worked for me
Click to expand...
Click to collapse
Thanks guys Today i can try the guide..we ope in God:angel:
I try twrp jb recovery but not function because the teerminal it's impossible go in download mode (down+power)....The Jig Usb forf Asus exist?
Hello guys, but for this type of brick no one has an answer? Method with nvflash can 'operate according to you ..? But I'm trying to appear APX and install the drivers as a guide is a company because it makes them install it
As far as I can see nvflash is coming to TF300T, it has been developed for T201 (http://androidroot.mobi/t3_nvflash/). But at least for TF201 they have to have fastboot first, so that may not help you.
If I understand you correctly nothing is booting and you have neither ADB nor fastboot access. In that case I don't think there's anything to do except wait and hope for a working nvflash or to try to have Asus fix it, but since the tab is unlocked they probably won't do so for free.
It seems this tab bricks easily.
I have the same problem, and I hope nvflash too. But I don't know nvflash in dev or no. This my best device which die first. Cry
Having the same problem here also. Only had the tf300t for less than a week.
Here is a sticky to a thread I made. I'm just waiting for people to put in a bunch of ideas. Hopefully NVFLASH doesn't need fastboot.
http://forum.xda-developers.com/showthread.php?p=31465583#post31465583
Hi !
...to force entry in recovery ...you need first to reset your device than go to recovery ;
- press for 10 sec. power button , release and quickly press volume down and power button at the same time ! -> normal the device should be entered in recovery ! Good luck ! :good:
surdu_petru said:
Hi !
...to force entry in recovery ...you need first to reset your device than go to recovery ;
- press for 10 sec. power button , release and quickly press volume down and power button at the same time ! -> normal the device should be entered in recovery ! Good luck ! :good:
Click to expand...
Click to collapse
...Tried it about 1000 times, not possible, but thanks anyway. No fastboot possible, NVFLASH won't be working either...
I asked our friends at androidroot.mobi if it would be possible to have this issue solved with NVFLASH, this is their response:
@AndroidRootMobi Is it worth waiting for NVFLASH on (very hard) softbricked TF300t? Or should I go to @Asus
@AndroidRootMobi
@Joanuz @ASUS Sorry. If/when we support TF300T, you will need device-specific files. So no brick recovery if you're already bricked.
It sucks, I know. I'll be sending mine back to ASUS tomorrow. No warranty. Hopefully a reflash will do the job (normally it should be around 75 euro), if the mainboard needs to be replaced, the total costs will be around 200... I will open a thread here once it's under repair. Good luck!
Same problem. Stucked at Asus Logo but i can go into recovery. What can I do? Help me please
My PC finds it as Fastboot.
Seem I'm no alone...
Seem I'm not the only one.
This morning I bricked my tablet, 5 minutes after I bought a wall charger on EBay... :crying:
As for now the only answers seem to be from people that don't read post good.
We can't get to use the recovery...
Again, if someone knows how reset the tablet prior booting...
I beleive that its the only other way.
The last possibility, buy a new one...
I believe the problem started before.
- I unlocked my tablet more that a month ago, at the Jelly Bean release.
- Rooted
- Installed the official release
- Everything went well, up to this morning
- I noticed that my Rom Manager Premium start to show adds
- Goo manager refused to install recovery script
- Then I tried to go in recovery, it fails.
- I said to myself that it was better to start from scratch
- I tried a Factory reset using setting menu.
- After this step the tablet started to show This device is unlocked
-After the last step the device wouldn't boot no other way...
I don't know what happened but it seem a bit strange that everything worked fine before this morning.
For sure I'll keep exploring ways to get out of this mess.
But if I have to buy another tablet, there's a chance that I'll go to a Nexus 7...
Good luck to all the other unfortunate that that are in the same boat.
Alain
Hi back,
After I bricked my device i sended back my tablet to canadian customer service.
At first the didn't wanna fix the proble and the service told me that he needed to change the motherboard.
I argue a while and after an email discussion whit the customer service agent, they told me that they would fix the problem for me THIS TIME.
This morning I received my tablet and everything seem to work fine, as it was reset to factory.
BUT, after I started to investigate, seem that in no time the cover removed.
And maybe the motherboard change is a trick to suck more money from the users.
In fact I can't understand why you'de have to change the motherboard after the tablet is bricked.
Maybe I'm wrong, but I find this way of doing thing awefull, and I consider lucker that I got outa this mess...
Good luck to the others unfortunates
Alain
No need waiting for NVFlash, it is here (check developer section) but will not work on unit if already messed up.
I have used two things that aren't mentioned here; I don't recommend either but if you are ready to ship off it might work for you as it did for me.
Both times were caused from ota updates.
1. use of reset button while powered on, if that fails to help, poweroff and reset button again.
2. let battery run down, put ac charger on power strip which is turned off but plugged into ac. Hold foot over power strip button, hold power and down volume on unit; mash power button on power strip with foot while holding power and down volume on unit.
I should have said neither of these fixed my unit; they just allowed me to get into fastboot to fix my unit.
Bricked TF300GT (please help)
Hello developers,
I have a bricked Transformer the goes in a loop flashing ASUS every 5 seconds or so. That was after having unlocked and then reset to factory default.
I have been reading a lot of articles at various forum for a solution. I have never seen something so confusing. Please is someone can point to me a page where the un-bricking is described step by step for that aparticular model?
Many thanks in advance
Yves
NB: I have tried the -volume and power button trick or the +volume power button that just make a USB connection on my PC
---------- Post added at 11:01 AM ---------- Previous post was at 10:53 AM ----------
tobdaryl said:
No need waiting for NVFlash, it is here (check developer section) but will not work on unit if already messed up.
I have used two things that aren't mentioned here; I don't recommend either but if you are ready to ship off it might work for you as it did for me.
Both times were caused from ota updates.
1. use of reset button while powered on, if that fails to help, poweroff and reset button again.
2. let battery run down, put ac charger on power strip which is turned off but plugged into ac. Hold foot over power strip button, hold power and down volume on unit; mash power button on power strip with foot while holding power and down volume on unit.
I should have said neither of these fixed my unit; they just allowed me to get into fastboot to fix my unit.
Click to expand...
Click to collapse
I have the same problem and done what you described without success. What must I flash with fastboot and where will I get fastboot. I believe my machine is in JB 4.0.. Many thanks,
Yves
i got my tf300t bricked to.
got my tablet this weekend wanted to install cyanogenmod.
just did a week early'er a other one (the one for my mother)
that went well
my tablet installed de orginal 4.2.1 from asus.
Today wanted to install cyanogenmod.
run first de unlocker v8
the installed fastboot twrp421.blob
when i went to the twrp menu the cyanogenmod wont install, but the orginal wont start also not, it want nothing to start.
tryed with external sd.
ok i thought i want cmw so i run the recovery-clockwork-5.5.0.4-tf300t.img
went wel also.
i can only go to cwm but they are no file rights and still can install a zip or mount a sd internal or external.
now fastboot is not working
when i turn the tablet on it is going to cwm
wat i can do?
edit:
cmw version = v6.0.2.3
Me too! asus ask 230$ for replace new mainboard. I think they want eat money, because they already have nvfash to fix. 230$ can buy new item from amazon. I hate asus and never buy any thing of asus. Very bad support.
Unfortunately, I've bricked my Acer Tablet after trying to flash this ROM http://forum.xda-developers.com/showthread.php?t=1994294
The installscript finished the flash successfully, but after reboot, the bootloader only shows the message "Boot image verified failed" No booting and no CWM Recovery is available no more. I've tried several times to get into the fastboot mode with pressing the Power Button and Volume Button with the two knobs, but nothing helps. Neither switching the screenlock switch on and off. I figured out by trying, how to get into APX mode, but I don't know, if and how that could help me, solving my problem :/
Before I've tried to flash the ROM, I had CM10 with the Stock Bootloader in Unlocked Mode and CWM 6.0.2.3 Touch installed, but the Aroma Installer seems to have destroyed the CWM and locked my Bootloader again. Is there any way to unbrick the tablet now? Any help would be appreciated
V4lk0 said:
Unfortunately, I've bricked my Acer Tablet after trying to flash this ROM http://forum.xda-developers.com/showthread.php?t=1994294
The installscript finished the flash successfully, but after reboot, the bootloader only shows the message "Boot image verified failed" No booting and no CWM Recovery is available no more. I've tried several times to get into the fastboot mode with pressing the Power Button and Volume Button with the two knobs, but nothing helps. Neither switching the screenlock switch on and off. I figured out by trying, how to get into APX mode, but I don't know, if and how that could help me, solving my problem :/
Before I've tried to flash the ROM, I had CM10 with the Stock Bootloader in Unlocked Mode and CWM 6.0.2.3 Touch installed, but the Aroma Installer seems to have destroyed the CWM and locked my Bootloader again. Is there any way to unbrick the tablet now? Any help would be appreciated
Click to expand...
Click to collapse
Just let the battery run dry. Then let it boot up normally without pressing any buttons when the battery runs out by connecting it to your charger. Hope it works!
Thanks for the reply. I tried that, but nothing happens, just the indicator LED on the power button turns on orange. The tablet does not boot on itself, if I connect the charger. I have to press the power button, but this results again in "Boot image verified failed"
Edit: Update. I figured out how to get into fastboot. I read something on google, with switching the screenlock switch on and off. That doesnt worked for me: The thing was, to hold the power button AND the volume button with the two knobs, then the tablet starts, to release the power button and THEN, while still HOLDING the volume button pressed, to switch on and off the screenlock button. Then the bootloader starts into fastboot mode, going into androidsdk and typed in cmd "fastboot oem unlock" solved the problem. The ROM starts and everything is fine
Why you don't write into the mentioned thread? There seems to come the issues from then ask there, sorry can't understand why opening new thread instead asking there.
Also the first time heard sucha thing, I also change the rooms from cm10 to Jacobus, back to stock, on cool one and to cm and back, to test everything and try something out.
Never had issues buy this ways
Gesendet von meinem GT-N7000 mit Tapatalk 2
I don't have the right to post in the proper thread, so I opened up a new one.
In order to install a JB based ROM, you need the JB compatible CWM. The version of CWM you used is apparently for ICS, so I am a little surprised it worked to install CM10. Where did this 6.0.2.3 come from? Use 6.0.1.5 from pawitp. I've used it and swapped/flashed ROMs at least ten times. Never encountered that issue (or any issue). As a matter of fact, I would just run Vorbeth's EasyRoot as it does all the grunt work for you. I've used it twice and it worked flawlessly.
It is just too late... bad luck for me today, I fullbricked the tablet, after performing a restore with CWM 6.0.1.4. Not bootloader, nothing. Just APX Mode.
V4lk0 said:
It is just too late... bad luck for me today, I fullbricked the tablet, after performing a restore with CWM 6.0.1.4. Not bootloader, nothing. Just APX Mode.
Click to expand...
Click to collapse
Hi I had the same issue after flashing from CM10.1 to CoolOne. However I fixed it by unlocking the bootloader => reinstalling recovery => flashing CM 10.1 back.
Did you have any luck recovering from APX?
Gullinbursti said:
Did you have any luck recovering from APX?
Click to expand...
Click to collapse
No, unfortunately not. I gave my tablet 2 weeks ago to the acer repair service and got it back today. The support said, that they have changed the mainboard and flashed the latest android on the tablet, but they did that on guarantee, so I didn't had to pay something ^^ Now it is running Android 4.1.1 Stock ROM from Acer.
Exact same problem
I am having the exact same problem. I am able to boot into recovery mode but then I get the android laying down with with the red triangle, question mark. My bootloader is unlocked but aftrer the update my screen is stucked on the ICONIA TAB startup screen.
Till this morning my Infinity I was on CleanROM Inheritance 3.4.7 with TWRP 2.5.0.0 Recovery, this worked fine. However I wanted to switch to CROMi-Xenogenesis 4.4.1 so I flashed 10.6.1.14.4 WW Bootloader and TWRP 2.5, as said in the OP. Unfortunately after the flash my device is dead, maybee bricked? I can't power on my tablet, with power on - volume down I can't get into recovery anymore.
I can't remember exactly what I saw after the flash. There should be an blue bar but I can't remember I have seen it. I saw this bar before when I flashed another ROM. The tabled had enough battery power, 90 or 95%.
When I put the tablet to my laptop I saw the word APX under other devices. Windows and Windows update doenst't seem to have the drivers present, luckily i found modified Universal naked driver at this blog. So now I have APX, but no fastboot.
When I read this thread, there is not much hope for me. Or is there a way to boot in fastboot modus? Any suggestions?
musicfreak said:
Till this morning my Infinity I was on CleanROM Inheritance 3.4.7 with TWRP 2.5.0.0 Recovery, this worked fine. However I wanted to switch to CROMi-Xenogenesis 4.4.1 so I flashed 10.6.1.14.4 WW Bootloader and TWRP 2.5, as said in the OP. Unfortunately after the flash my device is dead, maybee bricked? I can't power on my tablet, with power on - volume down I can't get into recovery anymore.
I can't remember exactly what I saw after the flash. There should be an blue bar but I can't remember I have seen it. I saw this bar before when I flashed another ROM. The tabled had enough battery power, 90 or 95%.
When I put the tablet to my laptop I saw the word APX under other devices. Windows and Windows update doenst't seem to have the drivers present, luckily i found modified Universal naked driver at this blog. So now I have APX, but no fastboot.
When I read this thread, there is not much hope for me. Or is there a way to boot in fastboot modus? Any suggestions?
Click to expand...
Click to collapse
I would figure the tablet is on somehow if APX is noticing it. Have you tried holding down the power button until it vibrates to force shut it down then hold the power and volume down to get back into the boot loader?
Just wanting to make sure because APX is useless unless you have you NVFLASH blobs.
Tylor
Sent from my ASUS Transformer Pad TF700T using Tapatalk HD
Tylorw1 said:
I would figure the tablet is on somehow if APX is noticing it. Have you tried holding down the power button until it vibrates to force shut it down then hold the power and volume down to get back into the boot loader?
Just wanting to make sure because APX is useless unless you have you NVFLASH blobs.
Click to expand...
Click to collapse
I thought I couldn't make my Transformer to power down. I hold the power button till it vibrates as you suggests. When I press volume down - power button nothing happens, the screen remains blank...
Maybee Nvflash is an option for me?
If I read http://rootzwiki.com/topic/35086-gu...rs-guide-unbrickrecoverdowngradeupgrade-tf201 correctly you can flash Nvflash in APX mode.
musicfreak said:
Maybee Nvflash is an option for me?
If I read http://rootzwiki.com/topic/35086-gu...rs-guide-unbrickrecoverdowngradeupgrade-tf201 correctly you can flash Nvflash in APX mode.
Click to expand...
Click to collapse
For this procedure, you must have obtained a blob.bin file by installing the hacked bootloader while you were still on a 9.4.5.26 or older bootloader.
If you don't have this file, and you don't know your tablet's unique SBK (Secure Boot Key), which nobody outside Asus knows, then you can't use nvflash.
Ah, so Nvflash is no option...
I contacted Asus support today by mail. First they came with the option of reinstalling the operating system for about 75 euro. Is that realistic? Or is an motherboard swap necessary? In that case the cost are about 160 till 200 euro. Quit a lot of mony. Then Ebay seems a better alternative...
musicfreak said:
Ah, so Nvflash is no option...
I contacted Asus support today by mail. First they came with the option of reinstalling the operating system for about 75 euro. Is that realistic? Or is an motherboard swap necessary? In that case the cost are about 160 till 200 euro. Quit a lot of mony. Then Ebay seems a better alternative...
Click to expand...
Click to collapse
If you can't get into recovery and you're using the correct side of the volume rocker (left!) and it really, really doesn't react to holding the power button for eternity - then you're probably bricked
The question is why? And how?
This hardly ever happens on the CleanRoms...
Did you reboot into system after flashing the bootloader and before flashing CromiX?
Sent from my ASUS Transformer Pad TF700T using Tapatalk HD
I don't know what happened after I flashed the 10.6.1.14.4 WW Bootloader and TWRP 2.5 recovery. After a while the tablet didn't react anymore...
In a Dutch forum I get the suggestion to check Easyflasher (http://www.youtube.com/watch?v=BxNmK6uXfFE&list=PLudvvIZ2s2oHbCK2Gb8aZHIoPpABzwthA). But om http://forum.xda-developers.com/showthread.php?t=1688012 I read WARNING: IF YOU USE THIS ON YOUR TF201/TF300/TF700 YOU WILL BRICK IT so this will be of no use I think.
I wouldn't use this -- it has been reported earlier to brick.
Have you tried to get into the bootloader -- that's what Tylor rightfully suggested, but I find your reply ambiguous -- press and hold down the left volume button ("volume down") and while you do so, keep the power button pressed until you feel it vibrate. Release the power button, and when/if you see some icons, release the volume button.
You're based in Amersfoort -- do you visit Utrecht with any regularity? (I live in Hoorn, but work shifts in the UMC Utrecht so might take a look at it for you.)
berndblb said:
The question is why? And how?
This hardly ever happens on the CleanRoms...
Sent from my ASUS Transformer Pad TF700T using Tapatalk HD
Click to expand...
Click to collapse
I strongly suspect the Recovery, I also had issues attempting to flash a later version of Clean
Rom. It took a day of flashing to get the tab back to health. Along the same lines I have also had issues flashing my T'bolt and also my DNA. For the time being I am refraining from changes on the tab and DNA.
I have used both CWM and TWRP
MartyHulskemper said:
Have you tried to get into the bootloader -- that's what Tylor rightfully suggested, but I find your reply ambiguous -- press and hold down the left volume button ("volume down") and while you do so, keep the power button pressed until you feel it vibrate. Release the power button, and when/if you see some icons, release the volume button.
Click to expand...
Click to collapse
I've done this, but I see no Icons.... For me it's hard to see if my tablet is on or off. But when I hold the power button for a long time it vibrates so I assume it's off then.
You're based in Amersfoort -- do you visit Utrecht with any regularity? (I live in Hoorn, but work shifts in the UMC Utrecht so might take a look at it for you.)
Click to expand...
Click to collapse
What a great offer! Sometimes I visit Utrecht, and the UMC so this would be nice. When I'm planning to visit Utrecht I will give you a sign.
OK, so I went over and despite musicfreak having good ideas along the way, we haven't been able to revive his 700, and I'm not feeling too optimistic it can be done. However, I don't want to pass up the opportunity for _that to show off his immense skill once more (feel the pressure? ) and help musicfreak out.
In short:
- unit doesn't actually boot into the bootloader at all, apparently. Screen stays black, no white lettering anywhere. Not a single one. Dead as a dodo.
- only APX mode is available, by booting with VOL_UP pressed-- nothing else works (screen is oof, so I cannot tell if anything else is loading; Windows detects only APX device connected). No fastboot.
- the procedure for reflashing stock doesn't work at all, obviously, because there was a custom recovery (TWRP) -- still, grasping every little straw, we tried -- everything -- but the screen stays black.
My own 700 is detected properly in fastboot mode, so it seems unlikely we have a cabling and/or USB port and/or OS error (tried both WinXP 32-bit and 7 64-bit).
After the usual hassle of getting the drivers in place -- musicfreak's saving the day of installing the patched drivers (I though the patch had gone mainline by now) -- we haven't been able to get any further.
Is there a command we can get to the device in APX mode to detect what is causing this?
Is this recoverable? RMA?
Thanks for the help and insights, guys and girls.
MartyHulskemper said:
- unit doesn't actually boot into the bootloader at all, apparently. Screen stays black, no white lettering anywhere. Not a single one. Dead as a dodo.
Click to expand...
Click to collapse
Dead/broken/missing bootloader (or broken eMMC), or dead screen.
MartyHulskemper said:
- only APX mode is available, by booting with VOL_UP pressed-- nothing else works (screen is oof, so I cannot tell if anything else is loading; Windows detects only APX device connected). No fastboot.
Click to expand...
Click to collapse
If you tried to enable fastboot mode blindly and the PC didn't detect it, then we can rule out "dead screen".
MartyHulskemper said:
Is there a command we can get to the device in APX mode to detect what is causing this?
Click to expand...
Click to collapse
The only way to do anything in APX mode is NVFlash. Without the SBK (aka "unobtainium") or the "wheelie" tool and the matching blob, that mode is useless, as far as I know.
_that said:
Dead/broken/missing bootloader (or broken eMMC), or dead screen.
If you tried to enable fastboot mode blindly and the PC didn't detect it, then we can rule out "dead screen".
The only way to do anything in APX mode is NVFlash. Without the SBK (aka "unobtainium") or the "wheelie" tool and the matching blob, that mode is useless, as far as I know.
Click to expand...
Click to collapse
Yup, the two options you call out here were in my head, too. I got over to musicfreaks' thinking that the bootloader was actually working, but it soon turned out to be dead. Since the only mode Windows can detect is APX and neither adb nor fastboot give any reaction or meaningful reply, I guess musicfreak's 700 is deceased.
@OP: given the fact that even our guru knows not how to save your 700, it comes down to either salvaging the parts and selling them on their own, or selling the broken unit and dock together subtracting the repair cost.
Anyone having specific ideas which is better? (I'd veer towards selling it in whole, which at least makes sure you're not going to get stuck with loose parts...)
Yes, there seems no hope for my TF700 anymore....
I also think that selling the whole set (tablet and dock) is the best choice.
Unfortunately looks like a brick to me. Without nvflash the only option is to send it off to Asus if you want it fixed. Otherwise sell it for parts (Screen, digitiser, case etc)
I will, ýesterday I've put my Infinity on sale, see this at on Tweakers.net (in Dutch). Anyone interested here?
One thing comes to my mind: why can't the SBK be generated? Can't it be extracted somehow from the processor?
@MartyHulskemper: Have we tried to flash the stock rom from MicroSD card? I'm not sure.
musicfreak said:
I will, ýesterday I've put my Infinity on sale, see this at on Tweakers.net (in Dutch). Anyone interested here?
One thing comes to my mind: why can't the SBK be generated? Can't it be extracted somehow from the processor?
@MartyHulskemper: Have we tried to flash the stock rom from MicroSD card? I'm not sure.
Click to expand...
Click to collapse
Nope. If it were unencrypted, we could've tackled it ages ago and use it to unlock the bootloader without ASUS knowing. I have no doubt that the processor serial number or some other identifier does figure into the process, but we do not know the rest of the algorithm used.
As to your specific question: there is no use in trying to flash anything from the microSD card since we couldn't get into the bootloader at all, and therefore have never even seen a recovery of whatever description or denomination.
As I said when I was at your place: I was udner the impression you at least had the bootloader and fastboot access. Although it's probably hard working even then, it would not be without hope. Not having a bootloader, and not having Nvflash at hand, well... I fear it is without hope.
It has been a while since I post the last update to this thread.
In short: I sent my tablet tot Asus, they charge me 310 euro. After an email discussion with them without notice they sent the tablet back to me. I asked the shop where I bought it for repair, and now I nead some information for my email to them.
All this goed wrong when I flashed CROMi-Xenogenesis 4.7.0. Is flashing this ROM more risky then flasting CleanROM Inheritance 3.4.7? If so, why?
I hope somebody can explain this to me.
musicfreak said:
It has been a while since I post the last update to this thread.
In short: I sent my tablet tot Asus, they charge me 310 euro. After an email discussion with them without notice they sent the tablet back to me. I asked the shop where I bought it for repair, and now I nead some information for my email to them.
All this goed wrong when I flashed CROMi-Xenogenesis 4.7.0. Is flashing this ROM more risky then flasting CleanROM Inheritance 3.4.7? If so, why?
I hope somebody can explain this to me.
Click to expand...
Click to collapse
No it is no more risky than flashing any ROM. Flashing a ROM is not very risky cos even if you brick you will be soft bricked and usually that is recoverable. Your issue may have been related to the bootloader and recovery flash. Did you interrupt it - it should have rebooted on its own after the blue bar went to full?
Hi.
I own a TF700T and seems to have bricked it. Last status was: I had the latest stock ROM with root running and wanted to get a CM11 based 4.4.2 image from here. I downloaded it and used rom manager to get it installed. But the install script failed at some point and I thought the recovery might be outdated. So I used ROM Manager to update recovery... I tried CWM and TWRP option. Finally I booted up into recovery trying again to install those damn rom - I used the option to wipe all data / settings from the main menu and tried again to install the ROM which again failed (I do not remember the error message clearly). I gave up. I used the "reboot" option.
Now:
- Powering up gets me into the screen with the ASUS logo (left upper corner says "the device is unlocked"). Here it is stuck forever.
- Power + Vol-Down is same as just Power - I do not get into flashboot with those 3 small icons... I just get the ASUS logo and nothing else happens. Reset hole does not change situation. The device is pretty much "always on" now (till battery is exhausted) as long-press Power turns off and immediately on again
- Only thing that seems to work: Power + Vol-Up ends up in APX mode - my computer recognizes the device via USB at this point
Unfortunately I never did any set up to nvflash.
Do I have any chance to get this thing alive again?
Thanks a lot in advance,
q2.
Quentin2 said:
Hi.
I own a TF700T and seems to have bricked it. Last status was: I had the latest stock ROM with root running and wanted to get a CM11 based 4.4.2 image from here. I downloaded it and used rom manager to get it installed. But the install script failed at some point and I thought the recovery might be outdated. So I used ROM Manager to update recovery... I tried CWM and TWRP option. Finally I booted up into recovery trying again to install those damn rom - I used the option to wipe all data / settings from the main menu and tried again to install the ROM which again failed (I do not remember the error message clearly). I gave up. I used the "reboot" option.
Now:
- Powering up gets me into the screen with the ASUS logo (left upper corner says "the device is unlocked"). Here it is stuck forever.
- Power + Vol-Down is same as just Power - I do not get into flashboot with those 3 small icons... I just get the ASUS logo and nothing else happens. Reset hole does not change situation. The device is pretty much "always on" now (till battery is exhausted) as long-press Power turns off and immediately on again
- Only thing that seems to work: Power + Vol-Up ends up in APX mode - my computer recognizes the device via USB at this point
Unfortunately I never did any set up to nvflash.
Do I have any chance to get this thing alive again?
Thanks a lot in advance,
q2.
Click to expand...
Click to collapse
Unfortunately ROM Manager does not work with the TF700 and you are not the first one to find out the hard way...
If you cannot find a way to boot into the bootloader to have fastboot, there's nothing you can do anymore without the NVflash blobs.
Did you try holding Vol - and then pressing the reset button in that little pinhole on the side of the tablet?
If you have ADB drivers installed on your PC you could try if you can establish an ADB connection at any point. If you did, you could issue the command: "adb reboot bootloader", which would enable you to flash a recovery and/or bootloader. This probably won't work since you need to be in the recovery or have Android booted for ADB to work, but worth a try anyway...
Admittedly these are very thin straws - but what have you got to loose?
Also: Just a few days ago a user here was stuck on a bootloop to recovery and couldn't get out of it. He left it alone overnight and all the sudden the bootloop sorted itself out... I have no explanation for it and it is unlikely to happen in your case, but you never know...
Good luck!
Thanks for replying.
Yes, I did keep Vol-Down (means Vol-Left) pressed while pinching the reset button. It did not help.
I will experiment a bit more. It's not really a boot "loop" - it gets stuck at the ASUS logo and this does not change anymore. Not overnight.
So far I could only see it being recognized as USB device in APX mode. Can you give me a bit background here? I have nvflash here. The blobs are not available anywhere on the net? Or why is that all a big fuzz? I used to have a Notion Ink Adam and APX saved my life several times, but the blobs were available to everybody. Nobody has the blobs here? Or are they device-specific?
I cannot believe that a today's device with a non-bricked bootloader and working APX is totally lost and even the manufacturer will only offer a costly RMA to replace the whole mainboard!?
Best regards,
q2.
Quentin2 said:
Thanks for replying.
Yes, I did keep Vol-Down (means Vol-Left) pressed while pinching the reset button. It did not help.
I will experiment a bit more. It's not really a boot "loop" - it gets stuck at the ASUS logo and this does not change anymore. Not overnight.
So far I could only see it being recognized as USB device in APX mode. Can you give me a bit background here? I have nvflash here. The blobs are not available anywhere on the net? Or why is that all a big fuzz? I used to have a Notion Ink Adam and APX saved my life several times, but the blobs were available to everybody. Nobody has the blobs here? Or are they device-specific?
I cannot believe that a today's device with a non-bricked bootloader and working APX is totally lost and even the manufacturer will only offer a costly RMA to replace the whole mainboard!?
Best regards,
q2.
Click to expand...
Click to collapse
For the TF700 the nvflash blobs are device specific - sorry.
Damn. That was the only answer I didn't want to read
Thanks a lot. So chances are gone, only RMA could help... I will ask friendly at Asus what costs they will charge...
q2.
Update:
Reply is here.
They only want to exchange mainboard. They of course know (and it seems that this is the only thing they know) that my bootloader was unlocked, therefore this is no case of guarantee for them. I know, I wrote to them that I just want to know how much they wanna charge me to fix this issue.
But: they don't want to tell me how much. They say they do not even know which revision and what hardware is inside my tablet, not even from my serial number. And I must first send them my tablet and they will charge me 95 Euro to check what's going on. And then they will tell me how much it will cost (and according to other threads I saw prices of over 400 Euro for a mainboard change - the TF701 successor model cost 450 Euro new in store)...
I somehow feel the need to reply that if they would've put only half the energy the put into logging who has unlocked the bootloader into the fact of making APX usable as a emergency recovery (as obviously not even Asus is able to generate a working blob for my device), they would have higher customer satisfactory statistics. I still just cannot believe a today's device lacks of all recovery options after a bootloader fails for some reason - as well as I cannot understand why Koush did not display a warning in ROM manager if problems are known to the community with this specific device (I mean the problem did not arise last week and ROM manager had tenths of updates since then).
I know that in the end all was my fault. And all flashing is done on our own risk. I will have to deal with it.
Phew...
Unlucky. It should be be stickied here somewhere that ROM Manager bricks the TF700 but then there is no guarantee it would be read. It is well known on this forum but that doesn't help people that don't visit frequently.
You can replace the mainboard yourself fairly easily. Watch the you tube vids on how to do it,. That is what I would do if I was in your position.
berndblb said:
For the TF700 the nvflash blobs are device specific - sorry.
Click to expand...
Click to collapse
Is there a way to backup my blobs before I leave all stock then?
Thanx! Zeddock
Sent from my SAMSUNG-SGH-I717 using XDA Premium 4 mobile app
zeddock said:
Is there a way to backup my blobs before I leave all stock then?
Thanx! Zeddock
Sent from my SAMSUNG-SGH-I717 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2455925&highlight=nvflash
Any Solution?
Quentin2 said:
Hi.
I own a TF700T and seems to have bricked it. Last status was: I had the latest stock ROM with root running and wanted to get a CM11 based 4.4.2 image from here. I downloaded it and used rom manager to get it installed. But the install script failed at some point and I thought the recovery might be outdated. So I used ROM Manager to update recovery... I tried CWM and TWRP option. Finally I booted up into recovery trying again to install those damn rom - I used the option to wipe all data / settings from the main menu and tried again to install the ROM which again failed (I do not remember the error message clearly). I gave up. I used the "reboot" option.
Now:
- Powering up gets me into the screen with the ASUS logo (left upper corner says "the device is unlocked"). Here it is stuck forever.
- Power + Vol-Down is same as just Power - I do not get into flashboot with those 3 small icons... I just get the ASUS logo and nothing else happens. Reset hole does not change situation. The device is pretty much "always on" now (till battery is exhausted) as long-press Power turns off and immediately on again
- Only thing that seems to work: Power + Vol-Up ends up in APX mode - my computer recognizes the device via USB at this point
Unfortunately I never did any set up to nvflash.
Do I have any chance to get this thing alive again?
Thanks a lot in advance,
q2.
Click to expand...
Click to collapse
Unfortunately I'm stuck in same boat I tried to wipe out settings completely and clockwork mode was stuck and I was able to wipe recovery with TWRP or so I thought tried to reboot into recovery got stalled and now stuck on asus screen. I'm not opposed to buying a new motherboard but I find it very hard to believe that no one has come up with a solution to flashing the mainboard with the original firmware. I'm tempted to ask asus but I know the bill will be more then the tablet. Did you find an easier solution or do I just have to swap out the mainboard?
sbdags said:
http://forum.xda-developers.com/showthread.php?t=2455925&highlight=nvflash
Click to expand...
Click to collapse
Thanx, but it seems like to backup blobs I have to do the very thing that will risk me needing backup of my blobs? ... install a custom bootloader before I have a backup?
Is this right?
Is this a safer method?
zeddock
zeddock said:
Thanx, but it seems like to backup blobs I have to do the very thing that will risk me needing backup of my blobs? ... install a custom bootloader before I have a backup?
Is this right?
Is this a safer method?
zeddock
Click to expand...
Click to collapse
That's correct. You have to flash a modified bootloader and recovery. Done correctly this is not risky at all. But if there is a single line in the instructions you are not sure you understand, you are not quite ready.
There are quite a few tutorials on flashing in fastboot on this forum. Read them.
But generating your nvflash blobs you have to do without a safety net. It's worth it though! I have become much more adventurous with my tablet since I have the blobs squared away...
berndblb said:
Done correctly this is not risky at all.
Click to expand...
Click to collapse
How do you define risk?
Flashing a bootloader (without having nvflash access) is always risky by my definition, it *can* permabrick your tablet if something goes wrong at the wrong moment. But it's the best we have.