Hey Guys Sorry I am New Here But I rooted My Phone And I wanted to install a rom Cyan engine mod thru rom manager and When i did I soft Bricked My phone In the verizon yellow screen But then i rooted it to The stock rom but i am still rooted some how , How do i get a new rom ?
Download a rom of your choice from one of the sgs3 development threads, copy it to your ext sd card, reboot into recovery, wipe phone, clear caches, install rom, install happened (if needed), wipe caches, reboot, let sit.
Thaw the jist of it. If you need a more detailed version, there are threads that walk you through it.
Sent from my PACmaned SCH-I535
Are you unlocked and have a custom recovery?
If you want to install a ROM you have to first download the correct ROM for whatever phone you have and put it where you won't forget it. Then you need to go into recovery mode and do a factory data reset then wipe your cache and last you need to wipe your dalvik cache which is found in the advanced options. Then you click install zip and the you find the ROM and install it. If it has the aroma installer just follow the instructions given. After that just restart your phone. The first time you boot up your phone takes a minute so don't get worried.
Sent from my SCH-I535 using xda premium
You mentioned that you are rooted, but have you also flashed a custom recovery? The easiest way to flash custom ROMs, at least in my experience, is definitely through the use of recovery.
Once the recovery is installed, simply download the ROM in .zip format, move it over to your phone's SD card, then flash away. The steps vary a little, but for CWM, the steps are generally:
Wipe data;
Wipe cache;
Wipe Dalvik;
Flash ROM;
Flash gapps;
At this point, I usually wipe the cache and Dalvik again; redundant, yes, but eh.
There are other ways too, but I am only familiar with this method. I imagine you could always flash ROMs via Odin, but I feel like that would be a lot more complicated for a newer user.
---------- Post added at 10:31 AM ---------- Previous post was at 10:20 AM ----------
lvgdgts said:
Are you unlocked and have a custom recovery?
Click to expand...
Click to collapse
Forgot; also ensure that your boot loader is unlocked. There is actually an app for it in the Play Store. Search for VZW GS3 EZ-Unlock on the forums. It's also on the Play Store, but I can't seem to find a link anywhere. Pretty much all you have to do is click "Unlock," and you'll be good to go.
MAKE SURE YOU DO THIS PRIOR TO FLASHING ANYTHING. You mentioned you were stuck at the Yellow Triangle in your post. One of the reasons for this includes forgetting to unlock your bootloader prior to flashing custom firmware (AKA Cyanogen Mod).
Make sure you unlock your bootloader. Download EZ Unlocker
^ make sure you have downloaded ez unlock first and then grab the latest recovery
need help with synergy rom
I just installed the new synergy rom latest version and it works pretty flawlessly except I cant turn my wifi on...this is a bother indeed. Any ideas jow to my that work cuz other than that one glitch it is amazing.
Related
Hey!
First let me say that I know all about flashing SGS and SGS2. Im a proud owner of SGS1 from day 1.
Last week I decided to finally flash my brothers i9023 so I flashed stock 4.0.3 with stock recovery. Then we wanted to flash some XDA stuff and I don't understand these guides...
I found one guide where you get superuser access with one click and usb cable, I did that, then I flashed CWM through Rom manager and flashed 4.0.4 from evilisto (v1.1) and it worked. Now I'm trying to flash some others, like nuhetri reloaded or pixel rom and I'm always getting stuck at boot animation. It just keeps "working" and nothing happens for 5+ minutes.
What am I doing wrong? Please help!
Best Regards
Luka
(in general)in recovery wipe data factory reset, format cache, davlik cache, system, boot. then flash new rom.
with nuhetri i think there is a bug where your not supposed to wipe data coming from another rom only davlik cache and cache then flash nuhetri
sean1984 said:
(in general)in recovery wipe data factory reset, format cache, davlik cache, system, boot. then flash new rom.
with nuhetri i think there is a bug where your not supposed to wipe data coming from another rom only davlik cache and cache then flash nuhetri
Click to expand...
Click to collapse
Hey and thanks for such quick reply!
I did all these now, rebooted to recovery (from CWM) and flashed this Fully Touched:
http://forum.xda-developers.com/showthread.php?t=1411734
Its stuck at boot image for 5 minutes now.
What now?
your using updated version of cwm? http://forum.xda-developers.com/showpost.php?p=22044793&postcount=82
steps
put rom on sd card
reboot into cwm recovery
wipe data, cache, davlik cahe, and format system and boot
install zip from sd card
choose rom you put on sd card
should say install from sd complete or something like that
reboot system now
let it boot into new rom (should not take more than 3-5 min)
edit: just seen this post in the rom thread your trying to flash http://forum.xda-developers.com/showpost.php?p=23255456&postcount=389 try redownloading again
sean1984 said:
your using updated version of cwm? http://forum.xda-developers.com/showpost.php?p=22044793&postcount=82
steps
put rom on sd card
reboot into cwm recovery
wipe data, cache, davlik cahe, and format system and boot
install zip from sd card
choose rom you put on sd card
should say install from sd complete or something like that
reboot system now
let it boot into new rom (should not take more than 3-5 min)
edit: just seen this post in the rom thread your trying to flash http://forum.xda-developers.com/showpost.php?p=23255456&postcount=389 try redownloading again
Click to expand...
Click to collapse
I did all that before... Im going to redownload, maybe its corrupted but I doubt it. Is it maybe because I have locked bootloader or something? Beacause I didnt use that long guide with "android SDK" in General, but some other very quick guide. Just plug USB, enable debugging and run some script and thats it.
devianceluka said:
I did all that before... Im going to redownload, maybe its corrupted but I doubt it. Is it maybe because I have locked bootloader or something? Beacause I didnt use that long guide with "android SDK" in General, but some other very quick guide. Just plug USB, enable debugging and run some script and thats it.
Click to expand...
Click to collapse
do yourself a favor, do it the right way the first time and save yourself headaches in the future. its not hard. fastboot oem unlock(bootloader), flash a custom recovery, flash a custom rom(and gapps) via the recovery, then boot up. thats it.
If you are more of a visual type of guy I suggest going on YouTube and search "zedomax". He has some really simple videos on how to root your nexus s, he has a couple videos on how to root but make sure its for a GSM nexus.
Simms got all in a simply way.
Unlock boot loader
Install or flash cwm
install the new stuff from SD card
reboot
Can anyone tell me or please provide a link to what unlocking bootloader does please.
Best Regards
Excuse my ignorance, I'm pretty new to this and I might not be of any help at all... but is it even possible to flash a custom recovery without unlocking the bootloader on the Nexus S?
I followed the instructions found on the NexusShacks.com website (How to root Nexus S or Nexus S 4G on ICS or Gingerbread) without any issues at all (sorry, can't post links due to low postcount :/)
No problems for me, I had zero experience with this sort of stuff but I have flashed a new ROM a every few days now without any issues whatsoever.
devianceluka said:
Can anyone tell me or please provide a link to what unlocking bootloader does please.
Best Regards
Click to expand...
Click to collapse
use this link: http://nexusshacks.com/
its complete with the files, pictures, video and some ics roms that you can try. let me know if you have any other question
I've been playing around with a Nexus S 4G that I have lying around and never used, and I've ran into a few problems, but you've all been helpful. I rooted all my old EVO 4G's without any problem, but the other day I rooted my NS4G using a one click/simple root and downloaded ClockWorkMod etc. But now for some reason It seems like I've almost lost my root? Is that possible? I still have the little unlocked symbol when booting up.
I've searched this forum and Google and haven't found anything, which could possibly be because I don't know what to look for. I've never had this happen :/
Currently running the stock 2.3.7
Nobody? I just need a little help.
Did you flash a superuser.zip after you installed clockworkmod?
SeeNah said:
Did you flash a superuser.zip after you installed clockworkmod?
Click to expand...
Click to collapse
I thought I had... But no lol
Thank you. Sorry for pretty much making a useless thread :/
Its the Q&A forum ask away! Lol
Did flashing it work for you though?
SeeNah said:
Its the Q&A forum ask away! Lol
Did flashing it work for you though?
Click to expand...
Click to collapse
Yes, it did. Thank you!
Now I just need to re figure out how to backup my stock rom on rom manager. I need to do that if I'm going to flash a custom rom onto my NS4G correct? I've never actually gone that far with my phones lol.
Slap-Yourself :) said:
Yes, it did. Thank you!
Now I just need to re figure out how to backup my stock rom on rom manager. I need to do that if I'm going to flash a custom rom onto my NS4G correct? I've never actually gone that far with my phones lol.
Click to expand...
Click to collapse
Okay lol hold on so just go make sure you
1. Unlocked the bootloader right?
2. Flashed a custom recovery (clockworkmod)?
3. Flashed superuser for root access?
4. Now you have a stock rooted ROM?
If you have/did all that then yeah you could backup your stock rooted ROM, you don't need to back it up but its helpful just incase you mess something you could always restore it to start all over
And you could backup any ROM you install incase you didn't know, just remember when you install different ROMS make sure to do a proper full wipe which includes data/factory reset/wiping DALVIK cache, and formatting system and boot in the "mount" option in CWM. And now I think your good lol
SeeNah said:
Okay lol hold on so just go make sure you
1. Unlocked the bootloader right?
2. Flashed a custom recovery (clockworkmod)?
3. Flashed superuser for root access?
4. Now you have a stock rooted ROM?
If you have/did all that then yeah you could backup your stock rooted ROM, you don't need to back it up but its helpful just incase you mess something you could always restore it to start all over
And you could backup any ROM you install incase you didn't know, just remember when you install different ROMS make sure to do a proper full wipe which includes data/factory reset/wiping DALVIK cache, and formatting system and boot in the "mount" option in CWM. And now I think your good lol
Click to expand...
Click to collapse
Unlocked Bootloader? If I boot in fastboot it says Unlocked. Is this what you mean?
I have ClockWorkMod, but I haven't done anything with it.
I have superuser from the root
and I was working with a stock ROM the whole time....
I think I'm ok lol
So I'll back up my ROM, and flash a Nightly CM9? And back that up as well? Just perform a factory data reset before doing so, right?
Slap-Yourself :) said:
Unlocked Bootloader? If I boot in fastboot it says Unlocked. Is this what you mean?
I have ClockWorkMod, but I haven't done anything with it.
I have superuser from the root
and I was working with a stock ROM the whole time....
I think I'm ok lol
So I'll back up my ROM, and flash a Nightly CM9? And back that up as well? Just perform a factory data reset before doing so, right?
Click to expand...
Click to collapse
Yeah if it says unlocked your good to go. The super user.zip you first flashed won't be needed once you flash different ROMS, it was only needed for stock because you didn't install a ROM you just unlocked the boot loader and super user just gave you root access that didn't come with stock.
Yeah backup your stock ROM JUST in case you encounter a boot loop so you can just restore and start over, you don't need to back up CM9 that's completely your choice if you want . Its convenient though if you like CM9 but still like to flash other ROMS that way you can just go back if you miss CM9 without doing the whole setup process.
And a full wipe is
Data/factory reset
Then wipe dalvik under "advanced"
Then wipe system and boot under the "mount" option in CWM
stellar said:
Yeah if it says unlocked your good to go. The super user.zip you first flashed won't be needed once you flash different ROMS, it was only needed for stock because you didn't install a ROM you just unlocked the boot loader and super user just gave you root access that didn't come with stock.
Yeah backup your stock ROM JUST in case you encounter a boot loop so you can just restore and start over, you don't need to back up CM9 that's completely your choice if you want . Its convenient though if you like CM9 but still like to flash other ROMS that way you can just go back if you miss CM9 without doing the whole setup process.
And a full wipe is
Data/factory reset
Then wipe dalvik under "advanced"
Then wipe system and boot under the "mount" option in CWM
Click to expand...
Click to collapse
I'm not sure if I'm supposed to post links to videos or not. But I'm in love with some of the features this guy has on his NS4G
https://www.youtube.com/watch?v=IKdyAm3CgHc
He said it was a nightly etc.
The hidden status bar and bottom menu hidden is amazing. I also like the inverted G-Mail and Facebook. Is this all separate from the Nightly ROM?
Hi All,
I have posted this on the GooManager thread but there hasn't been much activity there recently so asking here as well. Noob question on GooManager...I have the AOKP rom installed on my Sensation and GooManager notifies me of updates to my ROM every now and then. I just want to know if updating my ROM build with GooManager will reset all my custom ROM settings and preferences or will they all be preserved? I'd like to keep my ROM up to date but if it means spending all the time again to setup my preferences and icons/widgets/home screens etc. then I'd rather stick with what I have.
TIA!
I'd recommend to use GooManager only to download the newest ROM and flash it from recovery.
I asume you're using AOKP Swagger from frankenstine, the same I use.
I just download the update from GooManager, boot to recovery, flash ROM, gapps and 4.2 stuff and are ready to go.
All my settings are their after updating - only AdAway needs a reconfiguration and a reboot (and I need to set my alarm clock since I'm overwriting that). Basically you keep all your settings except those you made to the kernel.
Regards
lolmachine4 said:
I'd recommend to use GooManager only to download the newest ROM and flash it from recovery.
I asume you're using AOKP Swagger from frankenstine, the same I use.
I just download the update from GooManager, boot to recovery, flash ROM, gapps and 4.2 stuff and are ready to go.
All my settings are their after updating - only AdAway needs a reconfiguration and a reboot (and I need to set my alarm clock since I'm overwriting that). Basically you keep all your settings except those you made to the kernel.
Regards
Click to expand...
Click to collapse
Oh perfect, yes indeed I am using that exact ROM.
OK so when I boot to recovery, I shouldn't do any wiping? Just simply flash the new file? Will the updated gapps package be in the download I get from GooManager?
freddysensation said:
Oh perfect, yes indeed I am using that exact ROM.
OK so when I boot to recovery, I shouldn't do any wiping? Just simply flash the new file? Will the updated gapps package be in the download I get from GooManager?
Click to expand...
Click to collapse
I only wipe dalvik & cache after each update.
I can't say something about what GooManager downloads as "gapps", I use some I downloaded some weeks ago + some old version of 4.2 stuff. I might need to update my flash-setup too
lolmachine4 said:
I only wipe dalvik & cache after each update.
I can't say something about what GooManager downloads as "gapps", I use some I downloaded some weeks ago + some old version of 4.2 stuff. I might need to update my flash-setup too
Click to expand...
Click to collapse
Thanks lolmachine, for the benefit of anyone who might have the same question as me the following worked:
- Downloaded latest build of my AOKP Rom via GooManager
- Downloaded latest gapps package for my ROM via GooManager
- Boot to Recovery
- Flash new ROM file and then gapps package
- Restart.
My only question is, I didn't wipe davlik and cache so should I, and what difference does it make if I don't?
I used Goo the other day to flash, ummm, bugger, can't remember if it was an update or a new rom.
Oh now I remember, the latest one was an update to Bruce's Rom. I do believe when I tapped flash rom it booted to recovery (the one it installs) and I may have had to select "Install" from there, don't think so though. Either way, I used Goo to handle the install.
I didn't do a wipe. From what I've picked up, wiping is a good way to cover your butt. So if you're having issues and didn't wipe, you go back and do it all again with a wipe. Doing the wipe to start with means you can eliminate those types of issues from the start.
Someone can correct me if I'm wrong (which I probably am )
Hi there, I also received an update to my ROM via Goo Manager. It is CyanogenMod 10.1 by Albinoman887 for my HTC Sensation XE. I am using the EXT4 bootloader. I just installed it a few nights ago so I am completely new to rooting. My question is that there is no option to wipe dalvik cach. EXT4 just says wipe cache, wipe data and wipe system. Does wipe cache wipe dalvik cache as well. Also do I need to re-flash gapps as well after updating and will this wipe my gmail accounts etc?
Thanks,
Adam
thisisadamh said:
Hi there, I also received an update to my ROM via Goo Manager. It is CyanogenMod 10.1 by Albinoman887 for my HTC Sensation XE. I am using the EXT4 bootloader. I just installed it a few nights ago so I am completely new to rooting. My question is that there is no option to wipe dalvik cach. EXT4 just says wipe cache, wipe data and wipe system. Does wipe cache wipe dalvik cache as well. Also do I need to re-flash gapps as well after updating and will this wipe my gmail accounts etc?
Thanks,
Adam
Click to expand...
Click to collapse
You want to select "wipe dalvik+cache" option when you flash an update.
There's no need to flash gapps after a ROM update.
Sent from my Ouya
AndroidSupporter318 said:
You want to select "wipe dalvik+cache" option when you flash an update.
There's no need to flash gapps after a ROM update.
Sent from my Ouya
Click to expand...
Click to collapse
Thanks very much, downloading it now.
Help
im using albinoman's jelly bean rom
excuse me for noob doubts but
1) goo manager shows i have an update, so ive downloaded it. its a zip just like the rom n not just a small update. i have downloaded it now what should i do?
2) if i have to go to the recovery and flash the zip then i have to wipe only the cache right? Im using 4ext recovery.
3) will all my apps get uninstalled? what about the app data?
4) what about gapps? i have a gapps zip file, will i have to flash it again after the update?
Please reply thanks
I finally rooted phone after silly VMUNE7 thing on Verizon but after I get the install openrecoverscript and hit reboot recovery it does not go to teamwiz bootload instead I get something with a green driod on the bottom saying downloading but above it saying in red can't download Odin mode?? Please help I want to run cleanrom for better battery and less bloatware and keep my touchwiz. :crying:
all3rd said:
I finally rooted phone after silly VMUNE7 thing on Verizon but after I get the install openrecoverscript and hit reboot recovery it does not go to teamwiz bootload instead I get something with a green driod on the bottom saying downloading but above it saying in red can't download Odin mode?? Please help I want to run cleanrom for better battery and less bloatware and keep my touchwiz. :crying:
Click to expand...
Click to collapse
sorry man but i think you are talking for a samsung device am i right?
if yes then this is only for sensation/XE/4G devices
yasho170 said:
im using albinoman's jelly bean rom
excuse me for noob doubts but
1) goo manager shows i have an update, so ive downloaded it. its a zip just like the rom n not just a small update. i have downloaded it now what should i do?
2) if i have to go to the recovery and flash the zip then i have to wipe only the cache right? Im using 4ext recovery.
3) will all my apps get uninstalled? what about the app data?
4) what about gapps? i have a gapps zip file, will i have to flash it again after the update?
Please reply thanks
Click to expand...
Click to collapse
Simple.
Go to recovery.
For s-on you must enable smartflash.
Do a nandroid backup.
Dirty flash the update (meaning flash over the previous rom without wiping).
Dirty flash gapps (signed only).
Wipe cache + dalvik.
Reboot.
If it can't boot/run properly then you can just restore the backup or do a clean flash.
First off I'm not experienced in any way, got my Sensation unlocked, rootet and installed Sultanxda's 4.4.2 ROM for sensation. I'm on S-On, too, if anyone wonders.
Updating didnt affect my apps as far as I can tell. Everything seems to be the way as before and everything seems to be working.
What I did was download the ROM manually since the download with goomanager didn't work. I downloaded gapps as backup because I didnt have the zip on my SD, just in case anything would go wrong.
You only need to boot into recovery, with S-On make sure smartflashing or something like that is on, select the zip, flash it and then select wipe cache +dalvik.
It's pretty much what AndroidSupporter318 wrote, just wanted to give feedback and say what I did in detail in case anyone was still wondering.
LxMaD
I guaranted 4EXT Recovery for this type of problem. U don't need to boot into recovery and work with 4ext is very simple.
Hey guys, since my post count is too low to post my problems with this OTA update in the development section of this rom, ill do it here. Sorry for that.
I think im having no problems with flashing the 2.1. ROM yet but i have my concerns if i did that right.
First problem with flashing it, is the question if im having a custom kernel. I flashed ViperOneS a several times but made a fullwipe before.
So am i having a custom kernel or not?
Next issue is that im only able to flash this ROM with CWM. TWRP 2.5 doesnt work and even 2.3.3.0, which should work, but does not for me...
Well with CWM i ll do it that way:
1. Doing Fullwipe in CWM (Factory reset, Wipe Cache, Wipe Dalvik and System).
2. Flashing the ROM and choosing HTC Theme > Custom Kernel? > not sure sometimes "yes" sometimes "no".
3. Flash finished? > asks me if i want to reboot (into system) or save the logs. Since the instruction tells me to flash the boot.img first before rebooting...
4. ... im going into bootloader via adb which works
5. flash the boot.img
6. fastboot erase cache
7. reboot system
8. before doing the first setup i go into recovery and wipe cache.
I think 2.1 works but i want to be sure if i did everything right, especially with the custom kernel question and that i reboot into bootloader right after aroma says that the flash is finished.
Now i want to flash the 2.2.0 OTA because the update function through the ROM didnt work for me last time (it downloads the OTA but wasnt able to flash)
Im not sure how to flash the OTA right via recovery. Everytime i did that the ROM was kinda messed up, like when im turning the screen off and on Sense keeps loading and it takes some sec to unlock. And the venom tweaks app is totally laggy, even with the "trick" to go into app settings and wipe the cache and data which found on any other site (not xda...).
The problem is that they dont keep their instructions up-to-date (+ how to flash the OTA... right)
It looks to my like there are 100 different ways to flash 2.1.0 and 2.2.0 and only 1 is the right way which lets the ROM being amazing...
Hope you can help me. Thanks in advance!
turnschuh said:
Now i want to flash the 2.2.0 OTA because the update function through the ROM didnt work for me last time (it downloads the OTA but wasnt able to flash)
Im not sure how to flash the OTA right via recovery. Everytime i did that the ROM was kinda messed up, like when im turning the screen off and on Sense keeps loading and it takes some sec to unlock. And the venom tweaks app is totally laggy, even with the "trick" to go into app settings and wipe the cache and data which found on any other site (not xda...).
Click to expand...
Click to collapse
All you have to do ist to flash the OTA with your custom recovery like any other flashable zip if this isn't done automatically. You can simply copy it to your device from your pc or flash it from your mobiles download folder, it doesn't matter which way.
The 'trick' is very well known here at xda, but simply nobody wants to repeat it a hundred times... Here at xda there is even included the fact, that after rebooting you should change your skin once to get things going besides wiping cache and data in venom tweaks and hub.
What EXACTLY doesn't work with TWRP 2.3.3.0?
All you have to do ist to flash the OTA with your custom recovery like any other flashable zip if this isn't done automatically. You can simply copy it to your device from your pc or flash it from your mobiles download folder, it doesn't matter which way.
Click to expand...
Click to collapse
yea i did it like that. i just flashed it in the recovery, but im not sure if i have to wipe caches after or before doing that.
The 'trick' is very well known here at xda, but simply nobody wants to repeat it a hundred times... Here at xda there is even included the fact, that after rebooting you should change your skin once to get things going besides wiping cache and data in venom tweaks and hub.
Click to expand...
Click to collapse
about finding such "tricks": the problem is that those ROM release threads have tons of post (500+ sites of them) and it seems like 90% are from people who didnt even flash the ROM... i think you ll excuse me if i say i got tired of searching for my problems there^^
well can u tell me which skin i have to change? on venom tweaks or the htc skin on personalization? and app settings > venom tweaks > wipe cache and data right?
What EXACTLY doesn't work with TWRP 2.3.3.0?
Click to expand...
Click to collapse
when i flash it with 2.3.3.0 (or 2.5... its the same), the flash process doesnt even take up to 2 seconds and it says its finished and that causes a bootloop but doesnt make me wonder.
dont you have problems with TWRP flashing sense roms either?
ah and another one: did i flash the version 2.1 right and what about the custom kernel question?
well thanks for ur time.
edit: well this time flashing with twrp 2.3.3.0 worked somehow, but i choosed flashing without wipe (made it in recovery) and not to delete apps with aroma installer (which i did before)... just strange.
new problem. dont know whats wrong with my phone but:
wanted to make a backup of my ViperOneS 2.1 with TWRP 2.3.3.0 after lets say 70% of progress it starts turning off my phone and restarts into system. i flashed 2.5.0.0 but its the same issue (edit#1: with CWM too...). strange is that TWRP turned out my phone before when i wiped something there.
i think somethings really messed up atm...
edit#2: had to run a ruu over the system again, flashed twrp and backups seem work again..strange ****
I need help stuck in error message.
Phone: Verizon Galaxy S3 Sch-i535
Ok Heres what it did
(Phone already rooted)
I Downloaded and Flashed a Custom Rom from goo. manager (Samsung Galaxy S III (Verizon) CyanogenMod - d2vzw / cm-10.1.2-d2vzw.zip) and The gapps that came along with it.
Also downloaded Ez unlock to unlock my boot loader. (unlocked the boot loader)
Phone was successfully flashed with the new CyanogenMod, everything booted up fine. But when the phone starts to setup, i get an error message saying: Unfortunately, the process com.process.gapps has stopped.
i click ok and it keeps popping up.
Also between that error message I get another error message saying: Unfortunately, Setup Wizard has Stopped.
Can't access any part of the phone. Just stuck in the error message loop.
I do however have access to the recovery mode options that let you Install, wipe backup restore, mount, settings, advanced, reboot.
PLEASE HELP
You flashed the wrong gapps. Just boot into recovery, wipe, flash only the rom, then find the correct gapps, download them, boot back into recovery, flash new gapps, reboot system and you should be good to go.:good:
Don't flash roms in goo manager. Learn to do it the right way.
What is the correct gapps for rootbox 4.x and why is flashing gapps necessary? Should the wipes be done before the gapps or after?
I had the same problem as hesbordofallofus and managed to get back into TWRP and flash my old 4.1.1 rom. I'd like to check out a 4.2.2 or 4.3 vanilla rom. Clean rom 5.5.1 works well but uses battery up fast.
jd1639 said:
Don't flash roms in goo manager. Learn to do it the right way.
Click to expand...
Click to collapse
and what is "The right way" ? i only used goo manager because i have a mac and it's a little bit more difficult to flash a samsung Device with a macbook pro.
The problem with goo manager is that, obviously there's a chance you're going to flash the wrong gapps. I don't use clockwork mod recovery because when I rooted my phone with CASUAL it installed TWRP. But, I assume they both work the same way. When you flash files from recovery, you have to manually download the rom and gapps packages from their respective servers so as long as you've done the reading and the quadruple checking, you will flash the correct files for YOU'RE phone. Learning how to boot into recovery manually, using the three button combo is a very important part of flashing roms. And getting comfortable moving around in whatever recovery you're using makes it less likely that you will make a fatal mistake.
I probably spend an hour or two reading in my phones' forum everyday. I want to make sure I understand how to do what I'm doing properly and have a plan for when things go wrong. So read, read, read!!!!!
alt230 said:
What is the correct gapps for rootbox 4.x and why is flashing gapps necessary? Should the wipes be done before the gapps or after?
Click to expand...
Click to collapse
the gapps package is necessary because the package is a set of apps like the Play Store, Gmail, and other google apps. You can't sign into you're Google account without Gaaps. The process is always this:
1: wipe Data+ Cache
2. Install ROM (updater-script in ROM zip wipes system for u)
3. Flash PROPER GAAPS
4. Reboot
Remember "System" is essentially your Operating system. So don't wipe that manually unless you have a nandroid or a ROM zip as a backup. There is really no need to wipe system manually in Recovery because a the updater-script in a ROM zip always erases system for u. Just worry about formatting data manually before flashing ROM. Also remember when you flash a Gaaps package it gets installed to your system partition NOT Data. Just some info for you. Remember if you don't know how to do something ASK!! nobody is stupid here and no questions are dumb. If it keeps you from bricking your device then ask. Also READ READ READ! Always make sure you know what you r flashing and that it is meant for your device. The last thing you want to do is to flash a kernel or ROM made for a different version of ur device.
Sent from my SCH-I535 using Tapatalk 4
I'm not sure what you mean by manually formatting data. I'm also not really sure what you mean when you say don't manually wipe. My personal opinion is, when in doubt follow the dev's instructions. So for instance, when I decided on PACMAN, I went to the dev's page, scrolled down to the links to the downloads, grabbed that, then used link to the gapps, grabbed those, and usually right under the links, there's a brief set of directions for installing the rom/gapps. I always just do what they say. It's become a routine for me to research, pick a rom, grab the files, make as sure as humanly possible I've got them correct, make a fresh nandroid, then proceed.
When I say manually wipe I mean going into the wipe menu in recovery and choosing wipe data etc
Sent from my SCH-I535 using Tapatalk 4
Sandman-007 said:
the gapps package is necessary because the package is a set of apps like the Play Store, Gmail, and other google apps. You can't sign into you're Google account without Gaaps. The process is always this:
1: wipe Data+ Cache
2. Install ROM (updater-script in ROM zip wipes system for u)
3. Flash PROPER GAAPS
4. Reboot
Remember "System" is essentially your Operating system. So don't wipe that manually unless you have a nandroid or a ROM zip as a backup. There is really no need to wipe system manually in Recovery because a the updater-script in a ROM zip always erases system for u. Just worry about formatting data manually before flashing ROM. Also remember when you flash a Gaaps package it gets installed to your system partition NOT Data. Just some info for you. Remember if you don't know how to do something ASK!! nobody is stupid here and no questions are dumb. If it keeps you from bricking your device then ask. Also READ READ READ! Always make sure you know what you r flashing and that it is meant for your device. The last thing you want to do is to flash a kernel or ROM made for a different version of ur device.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
"The last thing you want to do is to flash a kernel or ROM made for a different version of ur device." Done that!
So the reason I couldn't get all my apps (I could see them) or get into playstore, log onto google find my contacts, etc. is that I didn't flash the gapps. BIG QUESTION: how do I know which gapps to flash? (BTW I dropped back to cleanrom 5.5.1 and it works fine but I can't send texts. I receive but can't send.) If I could I'd give it a rest and do my real work.
Usually the dev posts the Gaaps package you need in the OP if their thread or on their site.
Sent from my SCH-I535 using Tapatalk 4