Related
Hey!
First let me say that I know all about flashing SGS and SGS2. Im a proud owner of SGS1 from day 1.
Last week I decided to finally flash my brothers i9023 so I flashed stock 4.0.3 with stock recovery. Then we wanted to flash some XDA stuff and I don't understand these guides...
I found one guide where you get superuser access with one click and usb cable, I did that, then I flashed CWM through Rom manager and flashed 4.0.4 from evilisto (v1.1) and it worked. Now I'm trying to flash some others, like nuhetri reloaded or pixel rom and I'm always getting stuck at boot animation. It just keeps "working" and nothing happens for 5+ minutes.
What am I doing wrong? Please help!
Best Regards
Luka
(in general)in recovery wipe data factory reset, format cache, davlik cache, system, boot. then flash new rom.
with nuhetri i think there is a bug where your not supposed to wipe data coming from another rom only davlik cache and cache then flash nuhetri
sean1984 said:
(in general)in recovery wipe data factory reset, format cache, davlik cache, system, boot. then flash new rom.
with nuhetri i think there is a bug where your not supposed to wipe data coming from another rom only davlik cache and cache then flash nuhetri
Click to expand...
Click to collapse
Hey and thanks for such quick reply!
I did all these now, rebooted to recovery (from CWM) and flashed this Fully Touched:
http://forum.xda-developers.com/showthread.php?t=1411734
Its stuck at boot image for 5 minutes now.
What now?
your using updated version of cwm? http://forum.xda-developers.com/showpost.php?p=22044793&postcount=82
steps
put rom on sd card
reboot into cwm recovery
wipe data, cache, davlik cahe, and format system and boot
install zip from sd card
choose rom you put on sd card
should say install from sd complete or something like that
reboot system now
let it boot into new rom (should not take more than 3-5 min)
edit: just seen this post in the rom thread your trying to flash http://forum.xda-developers.com/showpost.php?p=23255456&postcount=389 try redownloading again
sean1984 said:
your using updated version of cwm? http://forum.xda-developers.com/showpost.php?p=22044793&postcount=82
steps
put rom on sd card
reboot into cwm recovery
wipe data, cache, davlik cahe, and format system and boot
install zip from sd card
choose rom you put on sd card
should say install from sd complete or something like that
reboot system now
let it boot into new rom (should not take more than 3-5 min)
edit: just seen this post in the rom thread your trying to flash http://forum.xda-developers.com/showpost.php?p=23255456&postcount=389 try redownloading again
Click to expand...
Click to collapse
I did all that before... Im going to redownload, maybe its corrupted but I doubt it. Is it maybe because I have locked bootloader or something? Beacause I didnt use that long guide with "android SDK" in General, but some other very quick guide. Just plug USB, enable debugging and run some script and thats it.
devianceluka said:
I did all that before... Im going to redownload, maybe its corrupted but I doubt it. Is it maybe because I have locked bootloader or something? Beacause I didnt use that long guide with "android SDK" in General, but some other very quick guide. Just plug USB, enable debugging and run some script and thats it.
Click to expand...
Click to collapse
do yourself a favor, do it the right way the first time and save yourself headaches in the future. its not hard. fastboot oem unlock(bootloader), flash a custom recovery, flash a custom rom(and gapps) via the recovery, then boot up. thats it.
If you are more of a visual type of guy I suggest going on YouTube and search "zedomax". He has some really simple videos on how to root your nexus s, he has a couple videos on how to root but make sure its for a GSM nexus.
Simms got all in a simply way.
Unlock boot loader
Install or flash cwm
install the new stuff from SD card
reboot
Can anyone tell me or please provide a link to what unlocking bootloader does please.
Best Regards
Excuse my ignorance, I'm pretty new to this and I might not be of any help at all... but is it even possible to flash a custom recovery without unlocking the bootloader on the Nexus S?
I followed the instructions found on the NexusShacks.com website (How to root Nexus S or Nexus S 4G on ICS or Gingerbread) without any issues at all (sorry, can't post links due to low postcount :/)
No problems for me, I had zero experience with this sort of stuff but I have flashed a new ROM a every few days now without any issues whatsoever.
devianceluka said:
Can anyone tell me or please provide a link to what unlocking bootloader does please.
Best Regards
Click to expand...
Click to collapse
use this link: http://nexusshacks.com/
its complete with the files, pictures, video and some ics roms that you can try. let me know if you have any other question
Hi All,
I have posted this on the GooManager thread but there hasn't been much activity there recently so asking here as well. Noob question on GooManager...I have the AOKP rom installed on my Sensation and GooManager notifies me of updates to my ROM every now and then. I just want to know if updating my ROM build with GooManager will reset all my custom ROM settings and preferences or will they all be preserved? I'd like to keep my ROM up to date but if it means spending all the time again to setup my preferences and icons/widgets/home screens etc. then I'd rather stick with what I have.
TIA!
I'd recommend to use GooManager only to download the newest ROM and flash it from recovery.
I asume you're using AOKP Swagger from frankenstine, the same I use.
I just download the update from GooManager, boot to recovery, flash ROM, gapps and 4.2 stuff and are ready to go.
All my settings are their after updating - only AdAway needs a reconfiguration and a reboot (and I need to set my alarm clock since I'm overwriting that). Basically you keep all your settings except those you made to the kernel.
Regards
lolmachine4 said:
I'd recommend to use GooManager only to download the newest ROM and flash it from recovery.
I asume you're using AOKP Swagger from frankenstine, the same I use.
I just download the update from GooManager, boot to recovery, flash ROM, gapps and 4.2 stuff and are ready to go.
All my settings are their after updating - only AdAway needs a reconfiguration and a reboot (and I need to set my alarm clock since I'm overwriting that). Basically you keep all your settings except those you made to the kernel.
Regards
Click to expand...
Click to collapse
Oh perfect, yes indeed I am using that exact ROM.
OK so when I boot to recovery, I shouldn't do any wiping? Just simply flash the new file? Will the updated gapps package be in the download I get from GooManager?
freddysensation said:
Oh perfect, yes indeed I am using that exact ROM.
OK so when I boot to recovery, I shouldn't do any wiping? Just simply flash the new file? Will the updated gapps package be in the download I get from GooManager?
Click to expand...
Click to collapse
I only wipe dalvik & cache after each update.
I can't say something about what GooManager downloads as "gapps", I use some I downloaded some weeks ago + some old version of 4.2 stuff. I might need to update my flash-setup too
lolmachine4 said:
I only wipe dalvik & cache after each update.
I can't say something about what GooManager downloads as "gapps", I use some I downloaded some weeks ago + some old version of 4.2 stuff. I might need to update my flash-setup too
Click to expand...
Click to collapse
Thanks lolmachine, for the benefit of anyone who might have the same question as me the following worked:
- Downloaded latest build of my AOKP Rom via GooManager
- Downloaded latest gapps package for my ROM via GooManager
- Boot to Recovery
- Flash new ROM file and then gapps package
- Restart.
My only question is, I didn't wipe davlik and cache so should I, and what difference does it make if I don't?
I used Goo the other day to flash, ummm, bugger, can't remember if it was an update or a new rom.
Oh now I remember, the latest one was an update to Bruce's Rom. I do believe when I tapped flash rom it booted to recovery (the one it installs) and I may have had to select "Install" from there, don't think so though. Either way, I used Goo to handle the install.
I didn't do a wipe. From what I've picked up, wiping is a good way to cover your butt. So if you're having issues and didn't wipe, you go back and do it all again with a wipe. Doing the wipe to start with means you can eliminate those types of issues from the start.
Someone can correct me if I'm wrong (which I probably am )
Hi there, I also received an update to my ROM via Goo Manager. It is CyanogenMod 10.1 by Albinoman887 for my HTC Sensation XE. I am using the EXT4 bootloader. I just installed it a few nights ago so I am completely new to rooting. My question is that there is no option to wipe dalvik cach. EXT4 just says wipe cache, wipe data and wipe system. Does wipe cache wipe dalvik cache as well. Also do I need to re-flash gapps as well after updating and will this wipe my gmail accounts etc?
Thanks,
Adam
thisisadamh said:
Hi there, I also received an update to my ROM via Goo Manager. It is CyanogenMod 10.1 by Albinoman887 for my HTC Sensation XE. I am using the EXT4 bootloader. I just installed it a few nights ago so I am completely new to rooting. My question is that there is no option to wipe dalvik cach. EXT4 just says wipe cache, wipe data and wipe system. Does wipe cache wipe dalvik cache as well. Also do I need to re-flash gapps as well after updating and will this wipe my gmail accounts etc?
Thanks,
Adam
Click to expand...
Click to collapse
You want to select "wipe dalvik+cache" option when you flash an update.
There's no need to flash gapps after a ROM update.
Sent from my Ouya
AndroidSupporter318 said:
You want to select "wipe dalvik+cache" option when you flash an update.
There's no need to flash gapps after a ROM update.
Sent from my Ouya
Click to expand...
Click to collapse
Thanks very much, downloading it now.
Help
im using albinoman's jelly bean rom
excuse me for noob doubts but
1) goo manager shows i have an update, so ive downloaded it. its a zip just like the rom n not just a small update. i have downloaded it now what should i do?
2) if i have to go to the recovery and flash the zip then i have to wipe only the cache right? Im using 4ext recovery.
3) will all my apps get uninstalled? what about the app data?
4) what about gapps? i have a gapps zip file, will i have to flash it again after the update?
Please reply thanks
I finally rooted phone after silly VMUNE7 thing on Verizon but after I get the install openrecoverscript and hit reboot recovery it does not go to teamwiz bootload instead I get something with a green driod on the bottom saying downloading but above it saying in red can't download Odin mode?? Please help I want to run cleanrom for better battery and less bloatware and keep my touchwiz. :crying:
all3rd said:
I finally rooted phone after silly VMUNE7 thing on Verizon but after I get the install openrecoverscript and hit reboot recovery it does not go to teamwiz bootload instead I get something with a green driod on the bottom saying downloading but above it saying in red can't download Odin mode?? Please help I want to run cleanrom for better battery and less bloatware and keep my touchwiz. :crying:
Click to expand...
Click to collapse
sorry man but i think you are talking for a samsung device am i right?
if yes then this is only for sensation/XE/4G devices
yasho170 said:
im using albinoman's jelly bean rom
excuse me for noob doubts but
1) goo manager shows i have an update, so ive downloaded it. its a zip just like the rom n not just a small update. i have downloaded it now what should i do?
2) if i have to go to the recovery and flash the zip then i have to wipe only the cache right? Im using 4ext recovery.
3) will all my apps get uninstalled? what about the app data?
4) what about gapps? i have a gapps zip file, will i have to flash it again after the update?
Please reply thanks
Click to expand...
Click to collapse
Simple.
Go to recovery.
For s-on you must enable smartflash.
Do a nandroid backup.
Dirty flash the update (meaning flash over the previous rom without wiping).
Dirty flash gapps (signed only).
Wipe cache + dalvik.
Reboot.
If it can't boot/run properly then you can just restore the backup or do a clean flash.
First off I'm not experienced in any way, got my Sensation unlocked, rootet and installed Sultanxda's 4.4.2 ROM for sensation. I'm on S-On, too, if anyone wonders.
Updating didnt affect my apps as far as I can tell. Everything seems to be the way as before and everything seems to be working.
What I did was download the ROM manually since the download with goomanager didn't work. I downloaded gapps as backup because I didnt have the zip on my SD, just in case anything would go wrong.
You only need to boot into recovery, with S-On make sure smartflashing or something like that is on, select the zip, flash it and then select wipe cache +dalvik.
It's pretty much what AndroidSupporter318 wrote, just wanted to give feedback and say what I did in detail in case anyone was still wondering.
LxMaD
I guaranted 4EXT Recovery for this type of problem. U don't need to boot into recovery and work with 4ext is very simple.
Looking for some input on clean ROM on the TF300T,
This is my second time trying to install it and both times it was successful, however as soon as the boot image loads up it stays stuck loading... I did download the file again thinking it may have been corrupted.
It has been sitting there loading for 20 minutes now.
I am using cwm the latest version and I did not install a kernel still running stock
Any ideas on what could cause this?
chibra said:
Looking for some input on clean ROM on the TF300T,
This is my second time trying to install it and both times it was successful, however as soon as the boot image loads up it stays stuck loading... I did download the file again thinking it may have been corrupted.
It has been sitting there loading for 20 minutes now.
I am using cwm the latest version and I did not install a kernel still running stock
Any ideas on what could cause this?
Click to expand...
Click to collapse
CWM has issues on this unit. Many, many complaints. I use twrp. If you decide to use twrp be sure to choose JB and tf300t version.
Clean ROM is freaking amazing! Seriously just do it I love the mods I can make for it too! Can't wait till I get my volume long press seek mod done! Love this device!
Sent from my SGH-T999
"So I put my phone into airplane mode and threw it... worst transformer ever. -.-" -My friend
tobdaryl said:
CWM has issues on this unit. Many, many complaints. I use twrp. If you decide to use twrp be sure to choose JB and tf300t version.
Click to expand...
Click to collapse
I initially when i first rooted intalled Twrp however i was not able to flash anything at all with it, it would give me errors.... that is the only reason i went to cwm.... I was able to make backups and restores with but ROMs flashing would just fail
chibra said:
I initially when i first rooted intalled Twrp however i was not able to flash anything at all with it, it would give me errors.... that is the only reason i went to cwm.... I was able to make backups and restores with but ROMs flashing would just fail
Click to expand...
Click to collapse
OK. It was just a suggestion since the problem you are experiencing is usually cleared by using twrp.
oryhight sullivan
tobdaryl said:
OK. It was just a suggestion since the problem you are experiencing is usually cleared by using twrp.
Click to expand...
Click to collapse
i m going to give twrp another shot...
i installed http://tinyw.in/5foT
JB version for the TF300T
This is the Rom i m trying to install
http://forum.xda-developers.com/showthread.php?t=2049322
Kernel is still stock and i ve left it that way through the aroma installer
Everytime i flash and reboot i get a boot loop
chibra said:
i installed http://tinyw.in/5foT
JB version for the TF300T
This is the Rom i m trying to install
http://forum.xda-developers.com/showthread.php?t=2049322
Kernel is still stock and i ve left it that way through the aroma installer
Everytime i flash and reboot i get a boot loop
Click to expand...
Click to collapse
I'm sorry it is hard to tell since you have chosen an older twrp to install. The current is five versions later and was updated as the kernels were updated to account for changes. The rom you are flashing is based on 10.4.4.25.
chibra said:
i installed http://tinyw.in/5foT
JB version for the TF300T
This is the Rom i m trying to install
http://forum.xda-developers.com/showthread.php?t=2049322
Kernel is still stock and i ve left it that way through the aroma installer
Everytime i flash and reboot i get a boot loop
Click to expand...
Click to collapse
Use TWRP 2.4.1.0
You are using a very old version of TWRP that has bugs with AROMA installer. So that is most likely where your issues are.
What ROM are you ccoming from? What boot loader are you on.
Sounds to me like you need to upgrade your boot loader and possibly do a full wipe - make sure you are on latest TWRP first otherwise you could brick if you use an older recovery!
sbdags said:
What ROM are you ccoming from? What boot loader are you on.
Sounds to me like you need to upgrade your boot loader and possibly do a full wipe - make sure you are on latest TWRP first otherwise you could brick if you use an older recovery!
Click to expand...
Click to collapse
Wise words. Nobody likes to listen to me so im glad someone else suggested it!
elesbb said:
Use TWRP 2.4.1.0
You are using a very old version of TWRP that has bugs with AROMA installer. So that is most likely where your issues are.
Click to expand...
Click to collapse
Updated the TWRP to the version you mentioned still stuck in boot loop.
sbdags said:
What ROM are you ccoming from? What boot loader are you on.
Sounds to me like you need to upgrade your boot loader and possibly do a full wipe - make sure you are on latest TWRP first otherwise you could brick if you use an older recovery!
Click to expand...
Click to collapse
The only ROM i was able to flash that was fully functioning is cm10.1,
i have also flashed PA 2.9 but had some bugs i couldn't stand (screen rotation not working, extended desktop with no pie)
as for boot loader it says 1.00e by "US _Epad-10.4.2.20-20121228" A03
I just updated the TWRP as recommended on the other post (v2.4.1.0)
on every flash i wipe dalvik / Cache / Factory reset.
Before attempting to boot into Clean Rom i also followed the steps on screen saying to wipe cache and dalvik.
I m hoping PA releases a 3.0 for this device and/or i m able to get Clean rom running
chibra said:
The only ROM i was able to flash that was fully functioning is cm10.1,
i have also flashed PA 2.9 but had some bugs i couldn't stand (screen rotation not working, extended desktop with no pie)
as for boot loader it says 1.00e by "US _Epad-10.4.2.20-20121228" A03
I just updated the TWRP as recommended on the other post (v2.4.1.0)
on every flash i wipe dalvik / Cache / Factory reset.
Before attempting to boot into Clean Rom i also followed the steps on screen saying to wipe cache and dalvik.
I m hoping PA releases a 3.0 for this device and/or i m able to get Clean rom running
Click to expand...
Click to collapse
If you are coming from cm10.1 you will definitely need to do a full wipe as it is non stock. It does say this in the first post. You only do a dalvik and cache wipe when upgrading from the same ROM or in CROMI's case from stock.
Do a data wipe in recovery, make sure you have a titanium backup or equivalent if you want to restore apps.
Success!!!
It worked perfectly fine after i install the back up i did before i flashed my 1st costume rom,
I rooted made a back up at stock/rooted... It just would not install from a full wipe,
it install fine once i flashed that specific backup and dirty flashed then wiped dalvik and cache before booting.
Hi guys
I got my one S two days ago, and in thursday ive read everything (as usual), did every single faq/tutorial and always got in the same end.. A dead device.
I don't know if I miss something or some "basic" knowing about it, i have a t-mobile one S and nothing wotks except runing the stock t-mobile update.
I'm coming from a long range nexus family (and i love sense, for sure), and i don't know what im doing wrong now.
And yeah, just in case, im runing a t-mobile stock, deodexed, rooted, init.d and optimized stock rom.
Thanks in advance.
can you list the steps?
I flash say CM10.1 like this:
1. download cm10.1 nightly zipfile from get.cm. Check md5sum
2. extract boot.img from above zip file.
3. copy zipfile to my sdcard
5.. boot into recovery ( I use TWRP )
6. install cm10.1 zip file
7. wipe cache and wipe dalvik cache
8. boot into bootloader
9. fastboot flash boot boot.img ( from you PC )
10. reboot and enjoy
My guess is you aren't doing 9). Indeed if you have S-OFF this step can be superfluous.
Three - that's how many posts I predict will remind you to post questions in the other forum
bluebenno said:
can you list the steps?
I flash say CM10.1 like this:
1. download cm10.1 nightly zipfile from get.cm. Check md5sum
2. extract boot.img from above zip file.
3. copy zipfile to my sdcard
5.. boot into recovery ( I use TWRP )
6. install cm10.1 zip file
7. wipe cache and wipe dalvik cache
8. boot into bootloader
9. fastboot flash boot boot.img ( from you PC )
10. reboot and enjoy
My guess is you aren't doing 9). Indeed if you have S-OFF this step can be superfluous.
Three - that's how many posts I predict will remind you to post questions in the other forum
Click to expand...
Click to collapse
Yes, all your steps listed, I've tried all this steps and got a bootloop, with any rom. That's why I make this thread, im starting to feel retarded.
Menelkir said:
Yes, all your steps listed, I've tried all this steps and got a bootloop, with any rom. That's why I make this thread, im starting to feel retarded.
Click to expand...
Click to collapse
Edit the title and remove Nooob!?!? for sure anyone jump in anyone if we missing something! And both my guesses where wrong
Firmware would be the next thing I'd look at - although CM10.1 is pretty tolerant. Please can you post all the text on your boot loader screen?
=> It is a S4 variant, right?
Do you get a success message when flashing the boot.img?
Was going to say..... We are talking S4?
Can't think what else can be wrong
Sent from my Liquid Smooth One S
CyanogenMod has NEVER worked on my HTC One S (S4), didn't matter how many times i wiped the system / cache / dalvik, didn't matter if i booted boot.img (S-ON), it just stayed on the splash screen.
Other ROMs worked though, an I am currently enjoying the hell out of my liquidsmooth ROM and OC kernel (bubba 3.6b). Maybe i just never let CM10 sit long enough...
But if you say that no ROMs work, are you sure you're not using an S3 device?
WCCobra said:
Do you get a success message when flashing the boot.img?
Click to expand...
Click to collapse
Yep
ATSPerson said:
Was going to say..... We are talking S4?
Can't think what else can be wrong
Sent from my Liquid Smooth One S
Click to expand...
Click to collapse
Yes.
Are you wiping system and data in addition to cache and dalvik?
Sent from my HTC One S using xda app
You say you end up with a bootloop, but are you giving the rom enough time to settle? The first boot can take a minutes to complete. I found this with CM when I first started flashing roms
Sent from my Liquid Smooth One S
i usually reboot one more time after initial boot
did you try reformatting sdcard, use a good formatter like sdformatter and do full format
Have you wiped system, cache and done a factory reset before flashing the ROM zip?
Sent from my HTC One S using xda app-developers app
Well I fixed. After a few tries I just format every single partition (even boot), and then flash the zip.
Hi.
I want to switch to ViperS 3.1.2 but have few questions before I do so. I've never done it before so I'm new to this.
Does it come rooted (or do all ROMs come rooted)?
Is there any instruction on how to do it or just flash it from .zip via the recovery mode (I have CWM 5.x.x installed already)?
And are there any bugs with it such as Wi-Fi problems/tethering, or calls (speaker)?
Also, what if something goes wrong? I've got a backup of my current ROM (stock), so do I just flash that one back or try ViperS' in case it was a mistake on my side?
Lastly, I've heard some people mentioning OTA updates. I'm assuming it's done in the same way as stock ROMs, so you just need Wi-Fi/working internet and the new update will install on its own, or do I have to download the update from here and then do it myself?
Thanks!
MrCatalyst said:
Hi.
I want to switch to ViperS 3.1.2 but have few questions before I do so. I've never done it before so I'm new to this.
Does it come rooted (or do all ROMs come rooted)?
Is there any instruction on how to do it or just flash it from .zip via the recovery mode (I have CWM 5.x.x installed already)?
And are there any bugs with it such as Wi-Fi problems/tethering, or calls (speaker)?
Also, what if something goes wrong? I've got a backup of my current ROM (stock), so do I just flash that one back or try ViperS' in case it was a mistake on my side?
Lastly, I've heard some people mentioning OTA updates. I'm assuming it's done in the same way as stock ROMs, so you just need Wi-Fi/working internet and the new update will install on its own, or do I have to download the update from here and then do it myself?
Thanks!
Click to expand...
Click to collapse
Are you S-Off or S-On? If S-Off then you can flash the zip directly from recovery and if you're S-On then you gotta flash 4EXT recovery first and enable smart flash feature and then flash the zip file.
There are no major bugs in the Rom except the ones listed on the OP of the official thread. Enjoy flashing.
Sent from my HTC Sensation Z710e using xda app-developers app
I'm S-Off. I've had root earlier but I've installed SuperSU and accidentally pressed Clean SU which has pretty much wiped it. :|
Post your bootloader details to make things more clearer. Flashing a custom Rom doesn't need root access. You can flash it as you're s-off.
What Rom you're using currently? What firmware?
Sent from my HTC Sensation Z710e using xda app-developers app
I apologise for not posting, although it may be a bit too late now since I'm already installing the ROM.
So, just wanna know now - do ROMs come rooted, and if I can always go back to stock ROM as long as I have the boot.img/download stock ROM from HTC site?
MrCatalyst said:
I apologise for not posting, although it may be a bit too late now since I'm already installing the ROM.
So, just wanna know now - do ROMs come rooted, and if I can always go back to stock ROM as long as I have the boot.img/download stock ROM from HTC site?
Click to expand...
Click to collapse
Yup they come pre-rooted
Thanks for the help, everyone! Managed to install the ROM, despite being stuck in bootloop for 2 hours but it works flawlessly now.
MrCatalyst said:
I apologise for not posting, although it may be a bit too late now since I'm already installing the ROM.
So, just wanna know now - do ROMs come rooted, and if I can always go back to stock ROM as long as I have the boot.img/download stock ROM from HTC site?
Click to expand...
Click to collapse
Most roms come rooted, and the rest provide root tools so you have a choice while flashing.
To return to stock look up ruu. An ruu + s on = your device as it came.
If you had flashed Firmware-3.33 before the ROM - you would have had no "bootloops" at all! The most important thing is to have Firmware-3.33
Rom is broken , EMERGENCY , plz help
Hello everybody. I'm in a real trouble with my phone. it's very emergency , so i really need your help please. My ViperS 3.1.2 is broken and doesn't boot. i reinstalled Rom without wiping and again with update only setting but still doesn't boot.I flashed boot.img again but still... i did everything i could such as wiping cache and dalvik cache but again the same problem. the phone stays on "SENSATION" boot screen with beats audio on bottom for 20 seconds and suddenly screen become dark and phone restarts . i wiped dalvik and again "android is upgrading" starts and after it finished the phone restarts again i know if i perform a full wipe during Rom installation it will be fixed but i REALLY,REALLY,REALLY need my contacts and messages.... is there anyway i could fix my phone or make a backup of contacts and messages??? PLEEAAASSSE help me . tnx
VAHIDHAVASBEIGY said:
Hello everybody. I'm in a real trouble with my phone. it's very emergency , so i really need your help please. My ViperS 3.1.2 is broken and doesn't boot. i reinstalled Rom without wiping and again with update only setting but still doesn't boot.I flashed boot.img again but still... i did everything i could such as wiping cache and dalvik cache but again the same problem. the phone stays on "SENSATION" boot screen with beats audio on bottom for 20 seconds and suddenly screen become dark and phone restarts . i wiped dalvik and again "android is upgrading" starts and after it finished the phone restarts again i know if i perform a full wipe during Rom installation it will be fixed but i REALLY,REALLY,REALLY need my contacts and messages.... is there anyway i could fix my phone or make a backup of contacts and messages??? PLEEAAASSSE help me . tnx
Click to expand...
Click to collapse
If you made a backup before flashing you should restore it, or else flash the ROM you had before flashing.
Then use "Titanium Backup" and back up your messages (your contacts are automatically synced with your google account, unless you saved them on the phone, but you can change that with the "people" app.
after you backed your phone up, make a full wipe, and flash the new ROM. Install Titanium Backup and restore your messages backup.
Good luck.
astar26 said:
If you made a backup before flashing you should restore it, or else flash the ROM you had before flashing.
Then use "Titanium Backup" and back up your messages (your contacts are automatically synced with your google account, unless you saved them on the phone, but you can change that with the "people" app.
after you backed your phone up, make a full wipe, and flash the new ROM. Install Titanium Backup and restore your messages backup.
Good luck.
Click to expand...
Click to collapse
excuse me, you said 2 options . first is to restore backup , unfortunately i don't have backup. second is flashing the rom i had before flashing ! i didn't understand what you said... what do you mean? i don't have any backup, if you can help me to boot up phone just for 2 mins to backup my contacts! they aren't synced to my google account....
pleeeeaaaaaaaaaasssseeeee helppp meee. i am becoming crazyy because of my problem.... HELP PLZZZ :crying:
VAHIDHAVASBEIGY said:
excuse me, you said 2 options . first is to restore backup , unfortunately i don't have backup. second is flashing the rom i had before flashing ! i didn't understand what you said... what do you mean? i don't have any backup, if you can help me to boot up phone just for 2 mins to backup my contacts! they aren't synced to my google account....
Click to expand...
Click to collapse
Get a download of the ROM you had before, and you can flash it normally. If you had stock, find a download of stock ROM (although Sense 3.6 custom ROMs might actually work too).
Right
i dont had a Problem :good:
astar26 said:
Get a download of the ROM you had before, and you can flash it normally. If you had stock, find a download of stock ROM (although Sense 3.6 custom ROMs might actually work too).
Click to expand...
Click to collapse
excuse me again! you mean install another ROM without Wiping on ViperS? I am using ViperS for about 1 years, Are you sure? now i should download another ROM like Android Revolution HD for sensation and install it on my phone without performing full wipe and it can fix boot problem?
VAHIDHAVASBEIGY said:
excuse me again! you mean install another ROM without Wiping on ViperS? I am using ViperS for about 1 years, Are you sure? now i should download another ROM like Android Revolution HD for sensation and install it on my phone without performing full wipe and it can fix boot problem?
Click to expand...
Click to collapse
Oh no, I thought you wanted to flash viperS. Flash the ROM you had before flashing, whichever ROM that was (but flash that specific ROM, not a different one. My advice from the previous comment was if you came from stock ROM). If you flash the same ROM you don't have to wipe, and then you can back up your phone.
astar26 said:
Oh no, I thought you wanted to flash viperS. Flash the ROM you had before flashing, whichever ROM that was (but flash that specific ROM, not a different one. My advice from the previous comment was if you came from stock ROM). If you flash the same ROM you don't have to wipe, and then you can back up your phone.
Click to expand...
Click to collapse
ohhh , in my first post i said ( i reinstalled Rom without wiping and again ...) i mean i did your advice , but it doesn't fix my problem... :crying:
VAHIDHAVASBEIGY said:
ohhh , in my first post i said ( i reinstalled Rom without wiping and again ...) i mean i did your advice , but it doesn't fix my problem... :crying:
Click to expand...
Click to collapse
I hope you can operate adb, because the solution I found requires it.
Go to recovery, and use adbto pull the contacts database with the following command:
adb pull data/data/com.android.providers.contacts/databases/contacts.db
It might give an error for a protected directory (but I don't know since it's going to be done in recovery), if that happens, use 'adb shell' and then 'su'. then exit, and you have root access to the device (do it only if required).
Once you obtained the file, it should be on your adb folder. you need to open it with a database app which supports SQLite3 (I won't reccomend anyrhing since I've never used them. but from a quick search I found a few. and searching in the context of reading android databases would give some recommendations.).
Good luck
p.s - It's hard for me to believe this is the simplest solution. It might work, but it's not easy. So others might give better solutions.
astar26 said:
I hope you can operate adb, because the solution I found requires it.
Go to recovery, and use adbto pull the contacts database with the following command:
adb pull data/data/com.android.providers.contacts/databases/contacts.db
It might give an error for a protected directory (but I don't know since it's going to be done in recovery), if that happens, use 'adb shell' and then 'su'. then exit, and you have root access to the device (do it only if required).
Once you obtained the file, it should be on your adb folder. you need to open it with a database app which supports SQLite3 (I won't reccomend anyrhing since I've never used them. but from a quick search I found a few. and searching in the context of reading android databases would give some recommendations.).
Good luck
p.s - It's hard for me to believe this is the simplest solution. It might work, but it's not easy. So others might give better solutions.
Click to expand...
Click to collapse
tnx , if i try i can do it. i can operate adb easily . but a person said me to backup /data partition with recovery and then perform a full wipe and install viperS again then restore /data . do you have any idea abou it? can it help?