Hi dudes,
here are my 3 ICS kernel for our HTC Sensation/XE/4G.
It supports Sense 3.6, 4.0 and 4.1.
You want more stuff in the kernel?! Tell me.
Default Modded
Stock
Ultimate
The Default one, is a modded one, that includes several stuff. You can find what exactly is in, on the post. Its thought for daily use, and my favourit.
The Stock one, is a clean and overclocked Kernel from the HTC Source (3.33.401.154).
With it you can get the best battery.
The Ultimate, is the same kernel as the Default Modded, but it can be overclocked to 2,2Ghz. Its made for guys that want to experiment with their Sensation. I don't recommend to use it as daily driver. STILL IN BUILD
I'm not responsible for anything that happens.
Hit thanks if you like my work
Default Modded Version
Features:
Linux 3.0.84
Based on SebastianFM Overclocked (Link)
For Sensation /XE/4G
Overclocked CPU, CPU voltage change
Overclock GPU in AROMA
USB OTG support
Governors: badass, lagfree, interactive, conservative, smartassV2, powersave, ondemand, performance
Choose in Governors special settings in AROMA
Choose CPU Freq for both or each CPU
2D and 3D overlock
Undervolting
Softswap and ZRAM support, choose in AROMA
Scheduler: deadline, cfq, sio, noop
Choose your minfree
Disable Logcat
VSync, FSync, Frandom support
Disable, dimm your button backlight
Sweep2Wake
Fastcharge
Built in thermal
Built in mpdecision
Notification LED Duration Mod
BCM4329 and BCMDHD driver
Performance optimized
Changelog:
Code:
r7.3 (02. July)
[LIST]
[*]patched to 3.0.84
[/LIST]
r7.1 (01. July)
[LIST]
[*]set higher temps for thermald
[*]added new gpu driver
[*]added stuff in AROMA props Harbir
[*]hopefully fixed AROMA :)
[/LIST]
r6.1 (22. June)
[LIST]
[*]patched to 3.0.83
[*]fixed AROMA setting with IO Scheduler
[/LIST]
r6.0 (18. June)
[LIST]
[*]fixed thermald and mpdecision not showing up on kernel tuner app
[*]finetuning on thermald and mpdecision
[*]forget the other stuff :eek:
[/LIST]
rC5.2 (15. June) [COLOR=Red][B](It is a Release Candidate)[/B][/COLOR]
[LIST]
[*]Linux 3.0.82 patch
[*]re-added inbuilt mpdecision
[*]fixed 2D OC
[*]fixed badass stuff
[*]added FSync
[*]added frandom
[/LIST]
rC5.1 (12. June) [COLOR=Red][B](It is a Release Candidate)[/B][/COLOR]
[LIST]
[*]removed built in mpdecision (hopefully it fix battery drain)
[*]fixed aroma
[*]fixed thermal
[*]Rebuilt from "scratch" (clean SebastianFM Base)
[/LIST]
r4.0 (09. June) :good:
[LIST]
[*]patched to Linux 3.0.81
[*]built in mpdecision
[*]built in thermal
[/LIST]
r3.0 (03. June)
[LIST]
[*] updated to Linux 3.0.80
[/LIST]
r2.0 (31. May)
[LIST]
[*]fix Sweep2Wake
[*]fix fastcharge
[/LIST]
r1.0
[LIST]
[*]Initial Upload
[/LIST]
Bugs:
None?!
Tell me
Thanks to:
SebastianFM for the Kernel Source
XxXPachaXxX
android1234567
mikrosmile
Jonny
axetilen
Bratwurstmobil
Yank555
showp1984
Grogg88
Faux123
you should be here? PM me
Download:
Default modded Version --> Download
(Default Version, with mods)
Source/Compiler/Info:
Source: Github
Compiler: GCC 4.3
Branch: Android 4.0.3/4.0.4
Kernel Version: 3.0.84
defconfig: JMB
I'm not responsible for anything
Stock
Features:
Linux 3.0.16
Based on HTC's Source
For Sensation /XE/4G
Overclocked CPU, CPU voltage change
BCM4329 and BCMDHD driver
Changelog:
Code:
r1.0
[LIST]
[*]Initial Upload
[/LIST]
Bugs:
None
Thanks to:
HTC for the Kernel Source
android1234567
mikrosmile
Jonny
you should be here? PM me
Download:
Stock Version --> Download
(Clean Stock Version)
Source/Compiler/Info:
Source: Github
Compiler: GCC 4.3
Branch: Android 4.0.3/4.0.4
Kernel Version: 3.0.16
defconfig: JMB-Stock
I'm not responsible for anything
Ultimate
reserved
Oc to 2.2ghz!!!! awesome
Sent from my HTC Sensation Z710e using xda app-developers app
I'll be expecting a lot more from our device now. Great job!
cool, TripNRaVeR was working on a 2.2 Ghz overclock, but he ended up moving to the One X....that will be the last mod i use before i fry my device and move to something new
@BanB
Are you using the latest msm_mpdecision from show-p or not?
Nice to see one more kernel dev. Good job man.
I'll post review about graphics and battery life(I adore this). Great job. The link is on.
link uploaded
HI BanB, when will the 2.2 ghz be ready, i really want that version, because me hardware can handle 1944mhz for now.... Thanks for the new kernel
The 2.2 Ghz will come in a few weeks, school is busy
s2w doesn't work at least for me....
I wonder if anyone tried the 2.2ghz frequencies? I saw the TripNRaver project but I never tried it.
I'm assuming *not all* Sensations are able to handle this sort of frequencies in a stable manner?
Also, did you updated the voltage table with the frequency?
Thank's a lot for your work man! :good:
slobo2712 said:
s2w doesn't work at least for me....
Click to expand...
Click to collapse
I added in Bugs list
Hi BanB,
Would you be able to add the FauxSound Audio/Sound-TPA feature. Which is mentioned in the app description so the Fauxsound TPA will be compatible with this kernel.
Thanks,
DM
PopaStefanx said:
HI BanB, when will the 2.2 ghz be ready, i really want that version, because me hardware can handle 1944mhz for now.... Thanks for the new kernel
Click to expand...
Click to collapse
Can your phone OC to 1.944GHz at 1350mV? If you have to go higher than 1350mV then your phone isn't actually running at 1.944GHz because the voltage regulator refuses to enforce anything above 1350mV.
BTW, BanB, congrats on your first kernel release
EDIT: Meant to say 1400mV, not 1350mV
Sent from my HTC Sensation using xda app-developers app
darkmantra said:
Hi BanB,
Would you be able to add the FauxSound Audio/Sound-TPA feature. Which is mentioned in the app description so the Fauxsound TPA will be compatible with this kernel.
Thanks,
DM
Click to expand...
Click to collapse
I can look for this
android1234567 said:
...
BTW, BanB, congrats on your first kernel release
Click to expand...
Click to collapse
Thank you Without you it weren't happened
Sensation is not made for 2.2GHz. IIt will end with an overheating problem.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi guys... and gals!!!
From overclocker to overclockers... LordMod kernel V5.5 CFS and V4.5.2 BFS
This is my first ever ROM and custom kernel for any device..
I tested it for a long time and I think that it's ready for the community..
I've only wanted to implement smartass because everybody (almost) wants it, but the project took me much further than I imagined.. I've lost 7 days on this so don't be harsh on commenting my work. I'm a BEGINNER in kernel building and ROM modding.
ROM is build from the latest commits of CM7
Kernel has been taken from “teamdesire” and modified a little to suit everybody!!
For those who care – Quadrant score is about 3400 on 1800MHz PERFOMANCE mod
I use BFQhs (ATM) PUV edition @ 122/1380MHz 24/7
Decided to update only the kernel... because ROM is basicaly CM7 nightly...
I'll include kernel update.zip with and without SD Card Read speed increase patch!
KERNEL (for CM7 only, apparently works great for MIUI):
Kali-'s kernel 2.6.32.28
Battery drain fix included - by teamdesire (allready implemented in CM7)
Chose default I/O scheduler
New Adreno 205 drivers like in nightly kernels
Kernel patched to 2.6.32.41
SMARTASS governor added and tweaked
CPU freq table totaly rewriten with lower voltages
OC up to 1990 MHz, min 122 MHz – DON'T GO OVER 1800MHz EXCEPT FOR SHOWOFF AT THE BAR I AM IN NO WAY RESPONSABLE FOR DHD SMOKING!!!
Volume boost 20%
SLQB slab memory allocator added
CFS (4.5.2) or BFS v400 (4.5.2) - difference for noobs
VDD user interface - usage
Patched libsqlite.so to disable db loops – thanx to ownhere
Under volt editions, UUV edition might not work for all.. use -25mV edition
Tiny RCU subsystem, Bloatware edition
Low level memory tweaks and fixes
Fixed some bugs regarding sleep/awake for video driver
Fixed first boot Wlan crash
Implemented 2 way recording patch by avs333 and skvalex - thread - only kernel 4.4.1 and now 5.1
Removed some debugging and statistic logging
GPU+ patch for better 2D and 3D perfomance (thanx -snq)
Disabled write cache support to enhance SD write speed
Updated drivers from HTC Saga and HTC Vivo - All glory and credits go to James Zdziebkowski for porting drivers
[*]Tweaked Interacive and Ondemand governor
[*]Added patches and fixes from latest CM7 kernel regarding Wlan chip, USB...
[*]Added USB accessory gadget support - patch from newest CM7 kernel
[*]Tweaks for video driver - patch from CM7 kernel (modified by me for Saga driver)
[*]Hopefully compatible with all AOSP ROMS for DHD - CM7 all bases, MIUI, UltimateDroid...
[*]Implemented USB thetering support - by James Zdziebkowski
"How to" for CM7 users:
Do a nandroid backup
Download desired zip from below
Copy to SD card
Go into recovery
Wipe cache partition
Wipe Dalvik cache
Flash from zip
Use 5.6 CFS or 4.5.2 BFS V400!
BEFORE flashing set your MIN freq to 230 or disable Set On Boot in Cyanogen Perfomance Menu!!!
V5.0 replaces some system libs for the video to work, so please do a BACKUP before flash if you want to return to other kernel!! - Use this if you want to restore to default libs, and than without restart flash kernel older than 4.5.2 - zip, older than 4.6 - zip
Scheduler flavours: BFQ I/O, BFQ I/O with hierarchical schedulling (only CFS), V(R) I/O
BFQhs V5.6 - CFS zip
VIO V5.6 - CFS zip
-25mV zip
-50mV zip
UUV zip
PUV zip - This is heavely UV even for UUV edition.. going from min 775mV trough all the freq range. If UUV worked for you, you must test this It's working fine for me 122/1380MHZ 24/7
Restore defaults zip
Restore defaults SCRIPT
If you want SD card speed patch, put this file into /etc/init.d folder and give it executable perrmision. It can corrupt your SD data! CAUTION - BACKUP
V5.5:
BFQhs V5.5 - CFS zip
VIO V5.5 - CFS zip
V5.1:
BFQhs V5.1 - CFS zip
VIO V5.1 - CFS zip
V5.0:
BFQhs V5.0 - CFS
VIO V5.0 - zip
V4.6:
BFQhs - CFS
VIO - CFS
V4.5.2:
BFQ - BFS
BFQhs - CFS
VIO - CFS - BFS
V4.4.1:
BFQ - BFS
BFQhs - CFS
V4.4:
BFQ - BFS
BFQhs - CFS
VIO - CFS - BFS
V4.3:
BFQ - CFS - BFS reuploaded
BFQhs - CFS
SIO - CFS - BFS
VIO - CFS - BFS
KERNEL V4.2 CFS - MIRROR MU
KERNEL V4.2 BFS - MIRROR MU
UV editions 4.2 CFS and BFS:
Ultra Under Volt CFS - BFS
Under Volt -25mV CFS - BFS
Under Volt -50mV CFS - BFS
Pinky Under Volt CFS - BFS - REUPLOADED - This is heavely UV even for UUV edition.. going from min 750mV trough all the freq range. If UUV worked for you, you must test this It's working fine for me 122/1380MHZ 24/7
KERNEL V4.0 CFS - MIRROR MU
KERNEL V4.1 BFS - MIRROR MU
UV editions 4.0 CFS an 4.1 BFS:
Ultra Under Volt CFS - BFS
Under Volt -25mV CFS - BFS
Under Volt -50mV CFS - BFS
KERNEL V4.0 BFS - MIRROR MU
UV for 4.0 BFS:
Ultra Under Volt BFS
Under Volt -25mV BFS
KERNEL V3.1.3 BFS - MIRROR RS, MIRROR MU
KERNEL V3.0.3 CFS - MIRROR RS, MIRROR MU
UV editions 3.X.3:
Ultra Under Volt BFS and CFS
Under Volt -25mV BFS and CFS
KERNEL V3.1 BFS - MIRROR RS, MIRROR MU
KERNEL V3.0 CFS - MIRROR RS
KERNEL V2.1.1 noBFS VDD sqlite – MIRROR RS
KERNEL V2.1.1 BFS VDD sqlite – MIRROR RS
KERNEL V2.1 noBFS VDD - MIRROR RS
KERNEL V2.1 BFS VDD – MIRROR RS
KERNEL V2.0 - MIRROR RS
KERNEL V1.2.2 (without SD patch) only .zip (Hope it works ) - MIRROR RS
KERNEL V1.2.2_SDfix (kernel with script to increase SD card reading speed) - MIRROR RS
I hope I implemented it right!
KERNEL V1.1 - MIRROR RS
KERNEL V1.0 - MIRROR RSTo have this kernel on MIUI, follow these simple steps from htctouchelfin!AGAIN - don't FORGET to do a nandroid backup prior to flashing!
No need for screen shots, because everybody knows how CM7 looks like.
Governors for NOOBS:
interactive - Instead of sampling the cpu at a specified rate, the governor will scale the cpu frequency up when coming out of idle. When the cpu comes out of idle, a timer is configured to fire within 1-2 ticks. If the cpu is 100% busy from exiting idle to when the timer fires then we assume the cpu is underpowered and ramp to MAX speed.
smartass - Is an improved version of interactive governor
ondemand – Available in most kernels, and the default governor in most kernels. When the CPU load reaches a certain point (see “up threshold” in Advanced Settings), ondemand will rapidly scale the CPU up to meet demand, then gradually scale the CPU down when it isn't needed.
conservative – Available in some kernels. It is similar to the ondemand governor, but will scale the CPU up more gradually to better fit demand. Conservative provides a less responsive experience than ondemand, but can save battery.
performance – Available in most kernels. It will keep the CPU running at the “max” set value at all times. This is a bit more efficient than simply setting “max” and “min” to the same value and using ondemand because the system will not waste resources scanning for CPU load.
powersave – Available in some kernels. It will keep the CPU running at the “min” set value at all times.
userspace – A method for controlling the CPU speed that isn't currently used by SetCPU. For best results, do not use the userspace governor.
History:
Code:
29-05-2011 V5.6 LorDmod kernel
[LIST]
[*]Kernel patched to 2.6.32.41
[/LIST]
11-05-2011 V5.5 LorDmod kernel
[LIST]
[*]Implemented USB thetering support
[*]Kernel patched to 2.6.32.40
[*]Tweaked conservative and interactive governors a little
[/LIST]
09-05-2011 V5.1 LorDmod kernel - Hopefully fixed for all AOSP ROM versions
[LIST]
[*]Changed the update script (AnyKernel.zip + Apache14) to suite all AOSP roms
[*]LOTS of fixes and cleanups for building and similar
[/LIST]
06-05-2011 V5.0 LorDmod kernel - builded with boot.img from nightly 64+
[LIST]
[*]Added 2 way recording patch to kernel based on V4.5.2 (V4.6) - all compliments go to avs333
[/LIST]
01-05-2011 V4.6 LorDmod kernel - ONLY later kangs than nightly 57!!!
[LIST]
[*]Tweaked Interacive and Ondemand governor
[*]Added patches and fixes from latest CM7 kernel regarding Wlan chip, USB...
[*]Added USB accessory gadget support - patch from newest CM7 kernel
[*]Tweaks for video driver - patch from CM7 kernel (modified by me for Saga driver)
[/LIST]
28-04-2011 V4.5.2 LorDmod kernel VR46 edition
[LIST]
[*]Updated audio driver from HTC Vivo
[*]Updated Adreno 205 drivers from HTC Saga
[*]Updated aic3254 driver from HTC Saga
[*]Updated panel driver from HTC Saga
[*]Updated tpa2051d3 (audio subsystem) driver from HTC Saga
[*]Removed 2 way voice recording - use kernel 4.4.1 for that
[/LIST]
27-04-2011 V4.4.1 LorDmod kernel Ass edition
[LIST]
[*]Disabled write cache support to enhance SD write speed
[*]Remove SEGFAULT limit
[*]Tweaked smartass governor for smooooth transitions :)
[/LIST]
25-04-2011 V4.4 LorDmod kernel Starvin Marvin edition
[LIST]
[*]Kernel patched to 2.6.32.39
[*]GPU+ patch to improve 2D and 3D (thanx to -snq)
[*]Removed some kernel debugging and statistic logging
[*]Implemented 2 way recording patch from avs333 and skvalex - [URL="http://forum.xda-developers.com/showthread.php?t=1048182"]thread[/URL]
[*]Hopefully fixed Wlan on first boot (thanx MDJ)
[/LIST]
23-04-2011 V4.3 LorDmod kernel Eastern Bunny edition
[LIST]
[*]Reorganized kernel nameing by adding different I/O schedulers for CFS and BFS kernels at normal voltages
[*]Added scripts to flash via CWM for UV - feel free to modify the scripts as you like for voltage - thanx gokhanmoral
[*]Min default frequency set to 230 for stability, feel free to chose 122 after the update
[/LIST]
22-04-2011 V4.2 LorDmod kernel
[LIST]
[*]Removed Simple I/O scheduler and added V(R) I/O scheduler as default
[*]Removed all other schedulers from compiling and hoping to clean out a kernel a little
[*]Add last driver update regarding sleep/awake fix from Cyanogenmod's kernel from N#42
[*]Added Pinky Ultra Voltage edition - thanx goes to jpinky (beta tester)
[*]Lowered MIN voltage to 700mV for VDD users
[/LIST]
20-04-2011 V4.0 and 4.1 LorDmod kernel
[LIST]
[*]Added -50mV kernel for people that UUV isn't stable and 25UV is stable to test
[/LIST]
18-04-2011 V4.1 LorDmod kernel (BFS only update)
[LIST]
[*]Updated BFS to the latest V400 from 2.6.38 kernel (I've modified the patch to fit :) )
[/LIST]
17-04-2011 V4.0 LorDmod kernel
[LIST]
[*]Patched kernel to .38
[*]Added Tiny RCU subsystem, Bloatware edition and set as default
[*]Added Simple I/O scheduler and set as default (no more BFQ scheduler)
[*]Lowmemory tweaks and fixes (by cyanogen)
[/LIST]
17-04-2011 V3.X.3 LorDmod kernel
[LIST]
[*]Added Under voltage editions
[*]CFS or BFS, the choice is yours
[/LIST]
15-04-2011 V3.X.3 LorDmod kernel
[LIST]
[*]BFS updated to v363
[*]Both version got more tweaked smartass gov for speed and response
[*]Updated script for Wlan module, hopefully fixing Wlan in MIUI (test please)
[/LIST]
11-04-2011 V3.1 LorDmod kernel
[LIST]
[*]Added BFS CPU scheduler V330
[/LIST]
10-04-2011 V3.0 LorDmod kernel
[LIST]
[*]Kernel taken from different source with better primary patches (from Kali-)
[*]Now has new Adreno 205 drivers included like kernel from nightlies (fast as hell)
[*]Remodded from the beginning so it can be set up on my [URL="https://github.com/LorDClockaN/htc-kernel-msm7x30"]git[/URL]
[*]Patched to version 2.6.32.36 so you all stop bugging me ;)
[/LIST]
08-04-2011 V2.1.1 kernel and CyanogenLordMod ROM 2.0
[LIST]
[*]Added patched libsqlite.so (test in TAP benchmark before/after to kernel (will be from now on in every kernel)) and ROM (quite numerous updates for this nightly)
[/LIST]
08-04-2011 V2.1 kernel
[LIST]
[*]Added VDD user interface - [URL="http://forum.xda-developers.com/showthread.php?t=821372"]usage[/URL]
[*]BFS and noBFS version
[/LIST]
07-04-2011 V2.0 kernel
[LIST]
[*]Yes, again new CPU table (don't use 122mhz (slightly upped 122 voltage, maybe will be better) if it's unstable, or 1990MHz)
[*]Added BFS CPU scheduler (Brain **** Scheduler)
[*]Lowered GPU memory allocation.. maybe this fixes some issues
[*]No more SD Card Read patch kernel
[/LIST]
05-04-2011 V1.2.2 kernel
[LIST]
[*]Again totaly revorked cpufreq and smartass tracking
[*]Lowest screen off freq 122MHz with big UV for battery saving
[*]Min 2mA screenoff with mobile data set to ON
[/LIST]
04-04-2011 V1.1 kernel only
[LIST]
[*]Totally Revorked freq table for smoother scalability
[*]Tweaks to smartass governor
[*]Allocated more memory to GPU
[*]Volume boost to 20% and some other volume tweaks (thanks LeeDroid)
[/LIST]
03-04-2011 V1.0 Initial release
Finaly only 1 screenshot (1920MHz Perfomance gov LorDmod V3.1.3 BFS)
Special thanks goes to DOALaboratories and teamdesire (all of them)!!
Thanks goes to hrkfdn and BuzzBumbleBee and Leedroid for their kernel sources on the git!git
DONATIONS so far: Walker Street, alexmason14, McGyver85, danalive, justaguy84, ...
Where to download? Whona try....
Sent from my Desire HD using XDA App
Uploaded
Download link in the "How to"...
Thanks.... will report litle later lm ln a beer house at a moment
Sent from my Desire HD using XDA App
Nice
Is it with Sense?
Does the kernel works with Rcmix hd?
Loafer1357 said:
Is it with Sense?
Click to expand...
Click to collapse
Its a CM7 based rom, so no.
Sent from my HTC Inspire 4G using XDA Premium App
Miror please,cant download
Sent from my Desire HD using XDA App
audio boost is very good! thanks
hoseth0711 said:
Does the kernel works with Rcmix hd?
Click to expand...
Click to collapse
Kernel is compiled from cyanogenmod so it can't be used in RCMIX or any other ROM than Cyanogenmod
I'll include only kernel in seperate update zip if anyone with CM7 wants to try only the kernel... later tonight or tomorrow
Now uploading ROM to another mirror
sup guys...
...lord clockan, thanks a bunch for this, i've been waiting for a crazy ass kernel like yours ;D....looking forward to flashing the kernel-only update.zip, since i'm using my own modified version of cm7....question: is it safe to use the device overclocked to 1.8ghz on a daily basis (nope, i don't want to risk smoking my phone using 1.9ghz all the time....;D)
keep it up, sir!
Please upload the kernel only as well...great work thx
Sent from my Desire HD using XDA Premium App
Kernel.zip uploaded and updated in first post!
I'm intruiged, this will be the next ROM for me to flash
I'm on rc4 and do we just flash this with with recovery and thats it thanks
Sent from my Desire HD using XDA Premium App
festa20 said:
I'm on rc4 and do we just flash this with with recovery and thats it thanks
Sent from my Desire HD using XDA Premium App
Click to expand...
Click to collapse
yes, you have "How to" in first post
Just wondering do u have anymore links to it like megaupload
It's ok its finally downloading my browser was messing up will report BK when its finished thank you
Sent from my Desire HD using XDA Premium App
I'll upload to hotfile in 20min... thats all I can do!
@279Paddy:
Well I saw people keeping at 1.8, but not perfomance mod... only for max setting, not all the time..
But at that freq the increase of voltage is 40% more than on 1000mhz, so expect less battery life offcourse
Great job man, it's cool to see all those hours of work come to frutition, huh i'll be using it personally, i'll test it and download. Once again, great job.
Semt from a puddle of Steve Job's tears
Thanx!!
Yep, finaly...
Now to try and implement some other stuff if I found something interesting..
Hi! Some of you may recognize me as the lead developer of CM10 nightlies for ace, and the codefireX nightlies, as well as the Andromadus Ace maintainer. I have decided to branch off the main kernel of the CM10 nightlies and codefireX nightlies due to some performance changes which don't seem to run on all devices. There may also be some more experimental patches included here prior to in the stable branch. This is due to working on making that kernel branch more stable for CM official and ALL users. Now all the boring stuff is out of the way ...Zanzibar (ZanzDroid), I'm sorry for this breaking our post:thanks experiment.
DISCLAIMER: I AM NOT RESPONSIBLE FOR PHONES ON FIRE, BLACK EYES, FINDING YOUR PHONE IN ORIFICES SURPRISINGLY, FRIED PHONES, YOUR CAT DYING, OR YOUR KID DOING A LINE OF BATH SALTS AND EATING YOUR FACE. THIS IS MEANT FOR JELLY BEAN AND AS EXPERIMENTAL AS THAT ONE DRUNKEN NIGHT IN COLLEGE.
RandomBlame's CM builds ARE NOT OFFICIALLY SUPPORTED! This means please don't post that it doesn't boot if you're running one of his builds. I'm not at all interested in closed source development, so I will not troubleshoot
FEATURES:
Generally kept up to date with any new CM and QCom CAF display patches
Always up to date with Linux Kernel 3.0* releases
Built with the custom cfX-Toolchain. Check the toolchain changelog below for more info
VDD SysFS interface for voltage modification
Dynamic file syncing
Fast Charge on demand (check the section below for full usage instructions)
Two way call recording support
VERY aggressive bus clocks
FINALLY giving the performance of 2.6 back to us
Everything else you're used to in the nightlies, and I'm already boring myself writing this
Kernel Changelog:
Code:
[size=4][b]v3.3:[/size]
[list]
[*]Patched to LK 3.0.70
[*]kernel common bcmdhd (wifi) driver via paulb-nl (fixed wifi related reboots)
[*]fixed charging led behavior via paulb-nl
[*]Some interactive changes from fyodor and upstream aosp kernel/common
[*]block driver changes
[*]switched to SIO by default
[/list][/b]
[size=4][b]v3.2:[/size]
[list]
[*]Patched to LK 3.0.66
[*]Built with cfX-Toolchain 4.7-2013.2-1 (check kernel changelog)
[/list][/b]
[size=4][b]v3.1:[/size]
[list]
[*]Patched to LK 3.0.63
[*]Patched BFQ to backported BFQv6
[*]Switched IO Scheduler to BFQ by default
[/list][/b]
[size=4][b]v3.0:[/size]
[list]
[*]Upstream sync changes
[*]Patched to LK 3.0.62
[*]Switched to upstream lzo from xz (far faster and size doesn't matter <<<men take note)
[*]A ton of optimizations from 3.4 kernel upstream, mostly vsprintf and assembly
[*]BIG update, so check github for full commit log
[*]Name courtesy of Lexmazter
[/list][/b]
[size=4][b]v2.8.1:[/size]
[list]
[*]Actually v2.8 and wifi fixed (new zip packing script)
[/list][/b]
[size=4][b]v2.8:[/size]
[list]
[*]Various compiling optimizations (cflags)
[/list][/b]
[size=4][b]v2.7:[/size]
[list]
[*]Patched to linux kernel 3.0.61
[*]TONS of other stuff (too drunk for full changelog)
[/list][/b]
[size=4][b]v2.5:[/size]
[list]
[*]Increased pmem sizes back to the pre-vision sizes to hopefully fix the reboot issue
[/list][/b]
[size=4][b]v2.4:[/size]
[list]
[*]Built with cfX-Toolchain 4.7-2013.1-1 (check toolchain changelog below)
[*]Patched to linux kernel 3.0.59 (check github for lk changelog)
[*]SIO default IO scheduler again
[*]BT up to date with CAF again
[*]Implemented suspend/resume for cpufreq driver from CAF 3.4 kernel mako kernel
[*]Dynamic fsync ported and enabled by default from faux123's android 3.4 mako kernel
[/list][/b]
[size=4][b]v2.3:[/size]
[list]
[*]Interactive gov up to date with AOSP kernel common and has a few tweaks by fyodor (juansheng)
[*]Redid the lower voltages
[*]Interactive gov is default and the recommended governor on SR4 and higher of cfX 4.2, or other roms which use a generic qcom PowerHAL
[*]Edition name by Mustaavalkosta
[/list][/b]
[size=4][b]v2.2:[/size]
[list]
[*]Increase Pmem sizes (should fix random reboots)
[*]Increase some parameters governing the random number generator
[*]Switched to EBI0 from EBI1
[*]Qdsp5v2: misc fixes
[/list][/b]
[size=4][b]v2.1:[/size]
[list]
[*]Built with cfX-Toolchain 4.7-2013.01 (check toolchain changelog below).
[*]Patched to linux kernel 3.0.58
[*]msm: cpufreq: Fix store_powersave_bias to account for sync' CPUs.
[*]cpufreq: Add cpu utilization statistics to aid decisions made by user
[*]msm: cpufreq: Fix the race between dbs_refresh and hotplug.
[*]Input: Send events one packet at a time
[*]msm_fb: Use an exclusive semaphore for Vsync IOCTL
[*]msm: vidc: Fix buffer pool index
[*]video: msm: Remove old post processing overlay integration
[*]msm_fb: Avoid memset of frame buffer during early suspend
[*]msm_fb: Update backlight level on resume after first pan display
[*]msm_fb: display: Add timeout for waiting on update
[*]Killer Bee name by Mustaavalkosta
[/b][/list]
[size=4][b]v2.0:[/size]
[list]
[*]Patched all the way up to linux kernel 3.0.57 (check git for full changelog)
[*]New memory layout from fyodor's vision layout (gives 620mb available to system instead of 594mb)
[*]Tons of CAF kgsl & video/fb commits
[*]Lots of various staging commits
[*]Some block changes
[*]Added a perf defconfig, so only one branch is used now
[/b][/list]
[size=4][b]v1.9:[/size]
[list]
[*]Patched to linux kernel 3.0.54 (check git for full changelog)
[/list][/b]
[size=4][b]v1.8:[/b][/size]
[list]
[*][b]patched to linux kernel 3.0.53 (check git for full changelog)[/b]
[*][b]a few CAF video commits (check git for full changelog)[/b]
[*][b]"Vertical line" bug fixed by paulb-nl [/b]
[*][b]Headset button support fixed by ucxl [/b]
[/list]
[size=4][b]v1.7:[/b][/size]
[list]
[*][b]patched to linux kernel 3.0.52 (check git for full changelog)[/b]
[*][b]quite a few CAF video commits (check git for full changelog)[/b]
[/list]
[size=4][b]v1.6:[/b][/size]
[list]
[*][b]Power imported from CAF[/b]
[*][b]LOTS of kgsl/video/FB commits from CAF and CM's d2 kernel (for full changelog check git)[/b]
[/list]
[size=4][b]v1.5:[/b][/size]
[list]
[*][b]Patched to linux kernel 3.0.51[/b]
[*][b]LOTS of android staging commits[/b]
[/list]
[size=4][b]v1.4:[/b][/size]
[list]
[*][b][PERFORMANCE VARIANT] Re-enabled my aggressive bus oc config that somehow got disabled[/b]
[*][b]regenerated the defconfig (kernel config) to include new Linux Kernel options [/b]
[/list]
[size=4][b]v1.3:[/b][/size]
[list]
[*][b]I patched to linux kernel 3.0.50[/b]
[*][b]sched: Folding nohz load accounting more accurate[/b]
[*][b]mmc: host: sdhci: Allow use of controller's native max blocksize [/b]
[*][b]block/deadline: tweaked for better performance on android[/b]
[*][b]Asynchronous I/O latency to a solid-state disk greatly increased[/b]
[*][b]staging: android/lowmemorykiller: Do not kill kernel threads[/b]
[*][b]SCHEDULER: Autogroup patch group by current user android UID instead of task id[/b]
[*][b]lib: genalloc: back to CAF's version[/b]
[/list]
[size=4][b]v1.2:[/b][/size]
[list]
[*][b]Using -mfloat-abi=hard again (benefits performance in both kernels. Some devices may not boot the performance kernel again).[/b]
[*][b]Built with the newest CFX-Toolchain (linaro gcc4.6.3 instead of 4.7.3 due to performance). Read [URL="https://github.com/codefireX/platform_prebuilts_gcc_linux-x86_arm-eabi-4.6/commit/39eaa57569e0591497594efddc94e7b95dd4181b"]HERE[/URL] to see how it differs from AOSP or Linaro's.[/b]
[*][b]1031 and higher of codefireX nightlies are also using this custom toolchain, so no need to flash stable on top of 1031 or higher.[/b]
[/list]
[size=4][b]v1.1:[/b][/size]
[list]
[*[b]patched to linux kernel 3.0.49. Changelog available [URL="https://github.com/KangBangKreations/KangBanged-7x30/commit/992e8fd3870b7622ccb813a0cd9a69c4ac05eb43"]HERE[/URL][/b]
[*][b]mm: slab: update (simonsimons34)[/b]
[*][b]Revert "Updated DS2746 battery driver" (paulb_nl - from my quick testing it seems to have fixed the battery jumps)[/b]
[*][b]bcmdhd: allow only unicast packets when screen is off (paulb_nl)[/b]
[*][b]lcdc_spade: spade_panel_sleep_in: do nothing (paulb_nl)[/b]
[/list]
[size=4][b]v1.0:[/b][/size]
[list]
[*][b]Reverted back to the heavily patched bfqv4 due to performance[/b]
[*][b]Drop swap cache aggressively[/b]
[*][b]Swaptoken only when swap full (better swap performance when swap is over half full)[/b]
[/list]
[size=4][b]v0.9:[/b][/size]
[list]
[*][b]Using CFX-Toolchain (4.7.3). Info can be found [URL="https://github.com/codefireX/platform_prebuilts_gcc_linux-x86_arm-eabi-4.7/commit/bc54c7449cafe00d24aedeec1c17546d23e8c77e"]HERE[/URL][/b]
[*][b]Patched BFQ to v5[/b]
[*][b]Using new cflag optimizations[/b]
[*][b]Some CAF display commits[/b]
[*][b]zRam bug fixes[/b]
[/list]
[size=4][b]v0.8:[/b][/size]
[list]
[*][b]I patched to Linux Kernel 3.0.48. Full changelog available in the github commit message.[/b]
[/list]
[size=4][b]v0.7:[/b][/size]
[list]
[*][b]Imported CAF's ondemand gov[/b]
[*][b]I patched to Linux Kernel 3.0.47[/b]
[*][b]DeathRay Flashlight mode (very bright) now works[/b]
[/list]
[size=4][b]v0.6 (NO RandomBlame CM builds or nightlies older than 1016 will not be officially supported due to new qcom api):[/b][/size]
[list]
[*][b]Spent hours porting 32 fb/video/display commits to bring up to date with CAF and CM's samsung d2 kernel for the new QCom Display API (fast as ****)[/b]
[*][b]Add full boost pulse support to interactive gov[/b]
[*][b]USB and unknown chargers now use HTC's AC ChargeMode. This means it uses HTC's AC temperature limits, and will switch to USB cable status if too hot. This is the best of both worlds and the same as plugging into your AC charger.[/b]
[*][b]Convert any oom_adj values to oom_score_adj values for backward compatibility.[/b]
[*][b]Update rotator to with CAF's jb_chocolate rotator changes.[/b]
[*][b]staging: android: lowmemorykiller: Don't count reserved free memory[/b]
[*][b]cpufreq: interactive: run at fraction of hispeed_freq when load is low (final interactive commit to bring up to date with Google's interactive gov)[/b]
[/list]
[size=4][b]v0.5.1:[/b][/size]
[list]
[*][b]This is a stable kernel only change for stability (performance kernel is the same as v0.5)[/b]
[*][b]Revert "arm: msm7x30: 1 higher pll2 clockstate to 1.7GHz+"[/b]
[/list]
[size=4][b]v0.5:[/b][/size]
[list]
[*][b]No more ****ty fast charge scripts (read new info).[/b]
[*][b]Fast Charge now enabled by default on non usb storage devices (great for cheap car/wall chargers)[/b]
[*][b]Added additional bus clockstate to stable kernel[/b]
[/list]
[size=4][b]v0.4.2:[/b][/size]
[list]
[*][b]Fixed the fast charge set on/off boot scripts FOR REAL[/b]
[/list]
[size=4][b]v0.4.1:[/b][/size]
[list]
[*][b]Fixed the fast charge set on/off boot scripts[/b]
[/list]
[size=4][b]v0.4:[/b][/size]
[list]
[*][b]Added fast charge, with enable/disable options[/b]
[*][b]Made 1996/2016MHz clockstates more stable (at least for benchmarking)[/b]
[/list]
[size=4][b]v0.3:[/b][/size]
[list]
[*][b]I patched up to 3.0.46 Linux Kernel. Check either github link and click that commit for the full changelog listed in the commit summary.[/b]
[/list]
[size=4][b]v0.2:[/b][/size]
[list]
[*][b]Stability Improvements (reboot/blackscreen bug). These changes will be in the new nightlies as well. If you can't run the performance kernel, you still won't be able to. Stick with the nightlies or the "stable" kernel if on another JB build. [/b]
[/list]
Toolchain Changelog:
Code:
[size=4]cfX-Toolchain 4.7-2013.2-1:[/size][list]
[*]GCC updated to gcc-linaro-4.7-2013.02
[/list]
[size=4]cfX-Toolchain 4.7-2013.1-1:[/size][list]
[*]GCC updated to gcc-linaro-4.7-2013.01
[/list]
[size=4]cfX-Toolchain 4.7-2013.1:[/size][list]
[*]Cloog updated to 0.18.0
[*]Ppl updated to 1.0
[/list]
[size=4]cfX-Toolchain 4.7-2012.12-2:[/size][list]
[*]Gdb updated to linaro-7.5-2012.12-1
[*]Mpc updated to 1.0.1
[/list]
[size=4]cfX-Toolchain 4.7-2012.12:[/size][list]
[*]Disabled simulator target and tui
[*]Graphite enabled
[*]Linaro gcc-4.7-2012.12
[*]Linaro gdb 7.5-2012.09
[*]Binutils 2.22
[*]Gmp 5.0.5
[*]Mpfr 3.1.1
[*]Cloog 0.17.0
[*]Mpc 1.0
[/list]
[/b]
Thanks and Credits:
IOMonster
KozmikKick
Faux123
MDeejay
ShowP1984
Cayniarb
ToastCFH
Kali-
Intervigil
eXistZ
CodeAuroraForum
Bhanvidia
DeamonFish
MrSchapps
Kraizk
ALL Team Codefire members
Google
KushDeck
Aus_azn
BananaCakes
Contactwajeeh
Rafyvitto
dumpsta
cruzin_cruzin
zacgoesrawr
Zanzibar
crackajack
Zelendel
daspazz
jenkem110
paulb_nl
Virtuous Team
Andromadus Team
CyanogenMod Team (all maintainers included)
anyone I forgot
Like my work? Feel free to buy me a beer for early morning dev HERE
LTC: LPEvPYYgHorueAitXXzRHn92TYjgfACDbY
The KB-Performance github
The KB-Stable github
THE PERFORMANCE VARIANT WON'T WORK ON ALL DEVICES. THE STABLE WILL, BUT IS ALREADY INCLUDED IN NIGHTLIES(when built)
Download Stable Kernel
Download Performance Kernel
Any plans for SENSE Kernels ??
ayham-dj said:
Any plans for SENSE Kernels ??
Click to expand...
Click to collapse
I think 4.1.1 is too old to use with 4.1.2 out now, so I really don't see myself making a kernel for old sense roms at all. Also there are issues with the video/kgsl drivers in this kernel and old sense roms.
Edit: We're going to be on ION soon anyway which won't boot on most pmem roms.
yeah synergye!
Downloading now.. i can't wait to test your performance kernel !!
Thank a lot for your awesome work for our device abandoned by HTC !
Welcome back synergye...:beer:
Sent from my HTC Desire HD using Tapatalk 2
can you add slide 2 wake to the kernel ?
http://forum.xda-developers.com/showthread.php?t=1346760
this would be awesome!
RE all the welcome backs: Hello again.
Pnoire: this what the tegra3 guy and I were benching against one another with ;P
rikusuicide said:
can you add slide 2 wake to the kernel ?
http://forum.xda-developers.com/showthread.php?t=1346760
this would be awesome!
Click to expand...
Click to collapse
I might, but due to being awful for battery life, I will probably do an implementation closer to showp1984's with a configurable polling interval, and default off.
Thanks for this - just downloaded and about to install
synergye said:
RE all the welcome backs: Hello again.
Pnoire: this what the tegra3 guy and I were benching against one another with ;P
I might, but due to being awful for battery life, I will probably do an implementation closer to showp1984's with a configurable polling interval, and default off.
Click to expand...
Click to collapse
Ouahh.. i've done two tests with AnTuTu
first test : only CPU and memory --> 2932
second: all test --> 4619
not bad for a DHD (max freq CPU set at 1920MHz of course
synergye said:
RE all the welcome backs: Hello again.
Pnoire: this what the tegra3 guy and I were benching against one another with ;P
I might, but due to being awful for battery life, I will probably do an implementation closer to showp1984's with a configurable polling interval, and default off.
Click to expand...
Click to collapse
sad
I tested, give me bootloop during boot with CodefireX build 1011 (Android 4.1.2).
hadobac said:
I tested, give me bootloop during boot with CodefireX build 1011 (Android 4.1.2).
Click to expand...
Click to collapse
I had flashed it with cm-cfX-20121010-OFFICIAL-ace and its working great so far. No issues here
hadobac said:
I tested, give me bootloop during boot with CodefireX build 1011 (Android 4.1.2).
Click to expand...
Click to collapse
Me, too.
Sent from my Desire HD using xda premium
magic1977 said:
Me, too.
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
strange.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yeah really strange. I flashed it once with wiping dalvik and cache. And then without wiping something. Resault is the same. I see the HTC splash screen and then nothing. Waited about 15-20 minutes and then i pull the battery.
Sent from my Desire HD using xda premium
magic1977 said:
Yeah really strange. I flashed it once with wiping dalvik and cache. And then without wiping something. Resault is the same. I see the HTC splash screen and then nothing. Waited about 15-20 minutes and then i pull the battery.
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
Maybe the download was corrupt?
I downloaded it 3 times. Maybe someone could post md5 so i can check.
Sent from my Desire HD using xda premium
I installed it after full wipe on cm-cfX-20121010-OFFICIAL-ace and it work great boot loop only on dirty flash :good::cyclops::fingers-crossed:
magic1977 said:
I downloaded it 3 times. Maybe someone could post md5 so i can check.
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
As the source is safe, you can know if the zip is corrupted by trying to open it. If you get an error then the file is uncomplete and you need to download again. Else, the file is ok to be flashed.
EDIT: btw i've flashed kernel .1 after a dirty flash of 1010 and don't experience bootloop or any issue at all.
magic1977 said:
I downloaded it 3 times. Maybe someone could post md5 so i can check.
Sent from my Desire HD using xda premium
Click to expand...
Click to collapse
I did a full wipe too
Code:
KangBang-Kernel-v0.1.zip
3582090 bytes
MD5: 14c28e2f6e7376e83f1b7c61abdec83c
Base Kernel Linux 3.0.74
-----------------------------------------------
Compiled with Christopher83 Linaro Toolchain 4.7.3 with cortex_a8 and neon optimization
-----------------------------------------------
init.d Tweaks Support
-----------------------------------------------
Governors :
Ondemand
Interactive
Performance
Powersave
Conservative
SmartAss v2
InterActiveX
Userspace
Lionheart
Lulzactive
SmartAss V3
OndemandX
HYPER
Fantasy
Virtuous
-----------------------------------------------
I/O-Schedulers
BFQ
CFQ
Deadline
Noop
S-i/o
Row
Fifo
Ram Avaible = 376mb in BIGMEM / 393 mb in HIGHMEM
-----------------------------------------------
Extreme UnderVolt ( thanks a diablo555)
24,576 Mhz - 750 mV
61,440 Mhz - 750 mV
122,880 Mhz - 750 mV
----------------------------------------------
184,320 Mhz - 750 mV
245,760 Mhz - 750 mV
368,640 Mhz - 800 mV
768,000 Mhz - 925 mV
-----------------------------------------
806,400 Mhz - 950 mV
902,400 Mhz - 1000 mV = 1V
-----------------------------------------
1017,600 Mhz - 1025 mV
1113,600 Mhz - 1025 mV
1209,600 Mhz - 1050 mV
1305,600 Mhz - 1075 mV
1401,600 Mhz - 1100 mV
1516,800 Mhz - 1150 mV
1555,200 Mhz - 1175 mV
1612,800 Mhz - 1200 mV
1651,200 Mhz - 1225 mV
1708,800 Mhz - 1250 mV
1766,400 Mhz - 1275 mV
----------------------------
1804,800 Mhz - 1300 mV
1824,000 Mhz - 1325mV
------------------------------------------------
Overclock to 1824 mhz( thanks diablo555) !!
-------------------------------------------------------------------------------
NoJpegCompression
-------------------------------------------------
AVS (Adaptive Voltage Scaling)
Fast Charge
BLX ( BatteryLifeExtender )
FSync
SnapDragon Optimization
Google Snappy Zram
LZ4 compression / decompression
VDD Voltage Control ( min uv set 710 ) ( use incredicontrol to change values )
CleanCache Driver
Armv7 and Linaro Optimization
-------------------------------------------------------
BLN9 ( use nstools or bln control )
What's Work
Call and messages
HW acceleration
USB mass
Deepsleep
Bluetooth
Camera
Audio
GPS
Ecc...
Solved SOD problem !! ( thanks arco )
WiFi
Vsync
BigMem 370mb with camera 5mp and 720p working
What's Doesn't Work
in HIGHMEM 720p break
Screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mod Edit: Link Removed
CHANGELOG IN THE 2 POST
my sources : https://github.com/biagio7xD
CREDITs:
BIG THANKS FOR CHRISTOPHER FOR HIS HELP !!
DOOMSDAY94
Diablo55 for helped my
Castagna for row schedular
xistance for his guide
arco for his source
Christopher83 for his toolchain and his source
voku to vokulmk
cyanogen team =D
and other =))
Changelog
Code:
[FONT=Century Gothic]Version RC3 [/FONT]
[LIST]
[*]update to 3.0.74
[*]sync with arco sources
[*]better ui perfomance
[*]new script for improvments
[*]Low touchscreen voltage
[*]Phantom Key Presses filtering
[*]new tweak for battery
[/LIST]
[FONT=Century Gothic]Version RC2 [/FONT]
[LIST]
[*]update to 3.0.73
[*]sync with arco
[*]modded lcd driver
[*]RE-ADDED CMBLN !!!!!
[*]dinamyc sync
[*]some optimization
[*]use SLQB
[*]use -O2 optimization
[*]charge now is 100%
[/LIST]
[FONT=Century Gothic]Version RC1 [/FONT]
[LIST]
[*]sync with arco sources
[*]sync with ivendor Sources
[*]update to 3.0.72
[*]tweak swappiness
[*]very low swappiness
[*]tweak deadline
[*]update 3.0.71
[*]black writeback page tweak created by me ( less lag when screen is on and less wakeups when screen is off )
[*]8% perfomance incresead thanks to some additional tweak and modd created by me
[*]Optimized SD card read/write speed
[*]mm/writeback: some adjustment
[*]LMK: Added screen on/off values and tunes some more. ( thank voku)
[*]Added whiteback tweak during screen on/off (franco)
[*]remove some unnecessary optimization
[*]Some Tweak To Ramdisk ( thanks castagna and ezekeel )
[*]some fix
[*]FIX BLX now work correct
[*]some new TWEAK
[*]NEW BOOTSPLASH
[*]cyanogenMod Team Tweak and Fix in some file
[*]ADD NEW DRIVER DISPLAY BIG THANKS CASTAGNA
[*] Avaible only SuperMem and exUV version for now
[/LIST]
-------------------------------------------END Beta Release -------------------------------------------------------
[FONT=Century Gothic]Version Beta II [/FONT]
[LIST]
[*]update 3.0.70
[*]Fixed Makefile of the compressed image to better support Linaro GCC 4.7 and armv7
[*]DYNAMIC COMPRESSION of clean page
[*]DYNAMIC COMPRESSION osf swap page
[*]Added RAM_CONSOLE support!
[*]Added dynamic read-ahead
[*]increased audio volume
[*]incresed net speed
[*]fix BLN9
[*]removed CMbln
[*] Sync with latest Ivendor / arco Sources
[*] add vibration regulator
[/LIST]
[FONT=Century Gothic]Version Beta I [/FONT]
[LIST]
[*]added VIRTOUS governor
[*]added HYPER governor
[*]add FANTASY governor
[*]add ENTROPY tweak
[*]add -O3 optimization in gpu
[*]tune lulzactive
[*]tune ondemand
[*]Fix cpu alignment
[*]Adjust virtual memory ratios
[*]Increase MAX Readahead to 1024 and MIN Readahead to 32
[*]Perform Snapdragon optimizations
[*]Backport AIO (Asynchronous IO) from Linux 3.5
[*]Improve memcopy/memmove
[*]Kill task closest
[*]more tweak battery/perfomance
[*]-O3 Optimization in gpu!
[*]Unaligned acces
[*]optimize SLUB ( thanks kasperhettinga )
[*]Sound Control
[*]BLN9 ( thanks krislibaeer....castagna and htc desire forum )
[/LIST]
[FONT=Century Gothic]Version V9.3.1[/FONT]
[LIST]
[*]update kernel base : 3.0.69
[*]16kb kernel buffer size
[*]new linaro toolchain ( thanks christopher )
[/LIST]
[FONT=Century Gothic]Versione V9.3[/FONT]
[LIST]
[*]reworked kernel form 0 with ivendor sources
[*]linaro optimization
[*]snapdragon optimization
[*]neon optimization
[*]use LZ4 compression/decompression
[*]lzo tune
[*]nexus governo fix
[*]fifo schedular I/O
[*]unaligned_access
[*]Applying Linaro Topology drivers
[*]sync with lates ivendor source
[*]sync with nexus kernel v9.2
[*]add more optimization
[*]lower swappines: 20
[*]add Optimized ARM RWSEM algorithm ( thank stratosk )
[*]add fsync
[*]add perfomance tweak thanks faux123
[*]Added O3 optimization for modules ( thanks christopher )
[*][PATCH] cpufreq: smooth scrolling (thanks to [user=635848]@gork[/user]hanmoral)
[*]lowmemorykiller and fugeswap modified
[*]use SLUB optimized
[*]-O3 optimization
[*]Glitch free GPU frequency changing
[*]tune ondemand and smartassv2
[*]Linaro CIFS Fix
[*]cleancache driver
[*]ADDED VOLTAGE CONTROL ( thanks ezekeel ) ( min uv is 710 )
[/LIST]
[FONT=Century Gothic]Versione V9.2[/FONT]
[LIST]
[*]update to 3.4.35
[*]Lowered WIFI voltage (Thanks to CastagnaIT)
[*]Lowered display panel voltage (Thanks to CastagnaIT)
[*]Implemented Google snappy compression / decompression
[*]Enable Google snappy ZRAM
[*]Snapdragon optimizations
[*]Enable SWAP, CISF, NLS_UTF8. NTFS, PPP_SYNC_TTY, PPP_ASYNC and fix CIFS
[*]mod wifi signal
[*]add lz4 compression and decompressione
[*]use lz4
[*]new bootsplash
[*]increased boot time ( now is very fast ! )
[*]more perfomance
[*]more battery tweak
[*]add more optimization
[/LIST]
[FONT=Century Gothic]Versione V9.1[/FONT]
[LIST]
[*]used 3.4.33 base
[*]add some battery / perfomance tweak
[*]add VOKULMK
[*]add fsync
[*]fix deepsleep
[*]add NEON optimization
[*]add more optimization
[*]new BIGMEM values ( now we have 377 mb with all work )
[*]add new governor created by me " NEXUS GOVERNOR "
[*]add smooth tweak
[*]add fast optimization
[*]low swappiness
[*]add perfomance tweak ( thanks faux123)
[*]add fsync ( thanks ezekeel )
[*]add frandom
[*]allow cpu based alignement handing
[*]asynchronous I/O latency
[*]optimized arm rwes algorithm
[*]used sha224 and sha384 routines
[*]add SMARTASSV3 governor
[*]fix my NEXUS governor
[*]32kb Kernel Log Buffer Size
[*]SLUB
[/LIST]
---------------------------STOP 3.0.X VERSION OF KERNEL----------------------------------------------
[FONT=Century Gothic]Versione V9.0[/FONT]
[LIST]
[*]update to 3.0.66-rc1
[*]-O2 optimization
[*]setted 245-1401 default frequency
[*]used new toolchain by christopher !
[*]added more optimization
[*]added new arm optimization
[*]added new lowmemorykiller aggressive
[*]add new toolchain optimization
[*]new bootsplash !!
[*]aumented readahead workaround
[*]modify logger.c
[*]lower swappines : now is 40
[*]add frandom
[*]sound hack
[*]swap pages tweak ( thanks hadidjapri )
[*]add network boost tweak
[*]Glitch free GPU frequency changing ( thanks castagna ! )
[*]new tweak for smooth
[*]add more optimization for arm !!
[*]new HIGHMEM values
[*]new BIGMEM values
[*]added blx ( thanks christopher )
[/LIST]
[FONT=Century Gothic]Versione V8.0[/FONT]
[LIST]
[*]update to 3.0.64
[*]added arm cortea8 optimization
[*]added neon optimization
[*]increasing boot speed
[*]added aggressive lowmemorykiller parameters
[*]add wifi tweak
[*]Add optimized AES and SHA1 routines ( thanks castagnaIT )
[*]add new BIGMEM values ( 368mb)
[*]add new HIGHMEM values ( 400mb )
[*]fix camera and video record
[*]added scary-lazy-intellidemand-lionheart governor
[*]add more optimization
[*]add -o3 modules optimization ( thanks doomsday)
[*]16 kb buffer size
[*]SLQB
[*]and other fix
[/LIST]
[FONT=Century Gothic]Versione V7.0[/FONT]
[LIST]
[*]added fifo I/O
[*]added wifi battery saver tweaks
[*]added lowmemorykiller new parameters
[*]battery 100%
[*]32kb buffer size
[*]added test sound hack
[*]SLQB
[*]-O3 optimization
[*]smooth tweaks
[*] adjust jpeg quality ( thanks ivendor )
[*]and other fix :)
[/LIST]
[FONT=Century Gothic]Versione V6.0[/FONT]
[LIST]
[*]Fix camera and video recorde
[*]Fix BIGMEM values ( now we have 370 mb in BIGMEM kernel )
[*]Fix HW video
[*]-O3 optmization
[*]SLQB
[*]Fast Charge ! ( use nstools for enable it )
[*]Fix governor
[*]Added VR I/O schedular
[*]64 kb kernel log buffer size
[*]set 1401 - 245 default frequency
[*]Fix AVS
[*]and fix other script =)
[/LIST]
[FONT=Century Gothic]Versione V5.1.1[/FONT]
[LIST]
[*]fix camera
[*]fix BIGMEM now we have 371 mb with all work !!
[/LIST]
[FONT=Century Gothic]Versione V5.0.0[/FONT]
[LIST]
[*]updated to 3.0.62
[*]added lulzactive
[*] fix smoothass
[*] -O3 optimization
[*] SLQB
[*] BIGMEM with camera 5mp and video 720 workin ( big thanks doomsday94 )
[*] AVS
[*] NoJpegCompression
[*] added Fantasy ( thanks castagna )
[*] added more fix
[*] and other fix =)
[/LIST]
[FONT=Century Gothic]Versione V4.1.5[/FONT]
[LIST]
[*]Camera (5mp and 720p ) work perfect
[*]-O2 optimization
[*]SLQB
[*]AVS fix
[*]Removed S I/O for add fix
[*]Fix some script
[*]NEW BOOTSPLASH EHNDROIX MINIMAL !!
[*]lRam avaible : 347 mb
[/LIST]
[FONT=Century Gothic]Versione V4.1.0[/FONT]
[LIST]
[*]update to 3.0.61
[*]camera work
[*]video work
[*]-O3 optimization
[*]SLQB ram allocator (thanks christopher83)
[*]extreme undervolt !
[*]fix governor
[*]fix i/o schedular
[*]compiled linaro toolchain 4.7.3 di christopher
[*]Neon optimization
[*]Linaro Optimization
[*]Some toolchain optimization
[*]fix some script
[*]AVS !!
[*]Buffer Size reduced to 32 kb
[*]NormalMem (368 mb di ram Avaible )
[*]fix Governor : SavagedZen - Smoothass - InterActiveX - BrazilianWax- Smartassv2- Userspace
[/LIST]
We'll try it soon
Great, new kernel.
Good luck!
Moved my replay here because of changelog.
What Governor/Scheduler have you chosen to get performance showed on picture?
Thread temporarily closed.
EDIT:
Thread reopened!
AW: (Kernel)(JB 4.1.2 / 4.2.1)(3.0.61) Nexus Kernel V4.1.0
Sorry bro, but instantly after i enter my PIN my phone freezes. Had to take the Battery out.
Sent from my GT-I9001 using xda app-developers app
I was try this on CyanogenMod 10.1 Alpha 2 but didn't work.
Phone was stuck after Samsung logo...
R: (Kernel)(JB 4.1.2 / 4.2.1)(3.0.61) Nexus Kernel V4.1.0
vellkan said:
I was try this on CyanogenMod 10.1 Alpha 2 but didn't work.
Phone was stuck after Samsung logo...
Click to expand...
Click to collapse
You install a 4.2 version ??
I and other guys on androidiani test a kernel and it works perfectly
Inviato dal mio GT-i9001 con Tapatalk 2
vellkan said:
I was try this on CyanogenMod 10.1 Alpha 2 but didn't work.
Phone was stuck after Samsung logo...
Click to expand...
Click to collapse
So far no kernels have worked on my ROM other than my own. I'm waiting to see the day it actually does. If you don't mind could you tell me if it was a black screen and only the LED's turned on if you touched them or just stuck on the samsung logo.
Thank you for this new Kernel!
For me, works great. Antutu was okay and now i test it for the next 24 hours. :good:
R: (Kernel)(JB 4.1.2 / 4.2.1)(3.0.61) Nexus Kernel V4.1.0
Xistance said:
So far no kernels have worked on my ROM other than my own. I'm waiting to see the day it actually does. If you don't mind could you tell me if it was a black screen and only the LED's turned on if you touched them or just stuck on the samsung logo.
Click to expand...
Click to collapse
3 days ago i tested your rom with my kernel and it is perfect but camera doesnt work
Inviato dal mio GT-i9001 con Tapatalk 2
Odp: (Kernel)(JB 4.1.2 / 4.2.1)(3.0.61) Nexus Kernel V4.1.0
Can anyone tell something more about the battery drain?
Wysłane z Nexus 7 dzięki Swype i Tapatalk.
Re: (Kernel)(JB 4.1.2 / 4.2.1)(3.0.61) Nexus Kernel V4.1.0
Pattttti said:
Can anyone tell something more about the battery drain?
Wysłane z Nexus 7 dzięki Swype i Tapatalk.
Click to expand...
Click to collapse
It's still fresh, someone needs to test it...
Sent from my GT-I9001 using Tapatalk 2
I'm still having the same problems as with the Kernel bundled with CM10 Alpha 7, a excessive RAM consumption with almost no RAM left, the low memory killer keeps terminating my Apps. Never had that issue on Kernel 2.6, I have no running bloatware if that matters. Just after a cold boot I have around 160MB free but after a few minutes I'm down to 5-10MB
Installed the normal version and it works perfectly on cm10 by ivendor (except the video recording at 720p).
I've tried all the new kernels and it seems that is the best!
Smooth, fast, without any lag! It remains to see how it goes with battery consumption.
Thanks biagio7xD!
any1 confirm this kernel working on 4.2.1
R: (Kernel)(JB 4.1.2 / 4.2.1)(3.0.61) Nexus Kernel V4.1.0
yowanvista said:
I'm still having the same problems as with the Kernel bundled with CM10 Alpha 7, a excessive RAM consumption with almost no RAM left, the low memory killer keeps terminating my Apps. Never had that issue on Kernel 2.6, I have no running bloatware if that matters. Just after a cold boot I have around 160MB free but after a few minutes I'm down to 5-10MB
Click to expand...
Click to collapse
I used a normalmem and i have 140 mb free....
Inviato dal mio GT-i9001 con Tapatalk 2
Υes there is an error here, but is so perfect kernel!
R: (Kernel)(JB 4.1.2 / 4.2.1)(3.0.61) Nexus Kernel V4.1.0
TwinHeadedEagle said:
It's still fresh, someone needs to test it...
Sent from my GT-I9001 using Tapatalk 2
Click to expand...
Click to collapse
I have used It since the first release and is working fine for me
Inviato dal mio GT-I9001 con Tapatalk 2
Hi guys!
I'm presenting my personal kernel, that started as an addon for Purity ROM, called Purified Kernel.
Now, this project got bigger and has a life of it's own. My nightlies are called Blue Panda and I'm going to share them with you.
All I want is full smoothness, performance and battery on my grouper, so I build always with latest Linaro.
Code is based of android-tegra3-grouper-3.1-jb-mr2 plus franco commits and other useful and powerful picks.
Kernel features:
Build on Lubuntu 13.04 x86_64
Build with Linaro 13.07 gcc 4.8.2 (arm-eabi official)
Full -O3 support (SLUB allocation), with cpu and target flags enhanced, linaro build improvements, etc
Based on franco nightlies+, cherry-picks on demand
Merged from Linux 3.1.10
MultiROM support (kexec)
zRAM disabled
USB-OTG, USB Audio and 3G Dongle support
Full USB network support, updated ASIX AX88* driver to version 4.8
Enhanced performance and battery patches (deadline+interactive)
Several TCP methods (westwoood default)
Several I/O control (deadline default, 512 buffer)
CPU governor tunables (default intereactive 204-1300MHz for battery and performance),
Use amazing hotplug routines by @franciscofranco, with Hotplug Control
FSYNC, WiFi high performance and Smart DImmer on/off
GPU Scaling controls (GPU OC available, 416MHz default battery and performance)
MPU voltages tunables with UV tables
Tweaked Ramdisk for AOSP, CM 10.2 and PA
Will try to port Sweep2wake to grouper in future
FOR JB 4.2.2: Download Purified.Kernel_r77_grouper.zip, flash and profit :highfive:
FOR JB 4.3: Download Purified.Kernel_r133_grouper.zip, flash and profit :highfive:
CHANGELOG:
Code:
[B][COLOR="Red"]Blue Panda r130:[/COLOR][/B]
[COLOR="Green"]
[LIST]
[*]Remerged CM10.2 grouper kernel commits, found some derps.
[*]Enabled some missing CPU Governors
[/LIST][/COLOR]
[B][COLOR="Red"]Blue Panda r130:[/COLOR][/B]
[COLOR="Green"]
[LIST]
[*]Merged CM10.2 grouper kernel commits
[*]Compilation tweaks and small fixes
[/LIST][/COLOR]
[B][COLOR="Red"]Blue Panda r114:[/COLOR][/B]
[COLOR="Green"]
[LIST]
[*]Small fixes
[*]Improved support for USB audio
[/LIST][/COLOR]
[B][COLOR="Red"]Blue Panda r113:[/COLOR][/B]
[COLOR="Green"]
[LIST]
[*]Tweaked Ramdisk for AOSP, CM10.2 and PA (didn't test this last one, just try)
[*]Superuser and SuperSU problems are past, full support now
[*]Small Ramdisk performance changes
[*]Support for USB audio
[/LIST][/COLOR]
[B][COLOR="Red"]Blue Panda r104:[/COLOR][/B]
[COLOR="Green"]
[LIST]
[*]Build with Linaro 13.07 gcc 4.8.2 (arm-eabi official)
[*]Initial support for JB 4.3
[*]Merged from Franco nightly r75
[*]MultiROM support
[/LIST][/COLOR]
[B][COLOR="Red"]Blue Panda r77:[/COLOR][/B]
[COLOR="Green"]
[LIST]
[*]Build with Linaro 13.07 gcc 4.8.2 (arm-eabi official)
[*]Some small improvements to compilation and fixes
[/LIST][/COLOR]
[B][COLOR="Red"]Blue Panda r70:[/COLOR][/B]
[COLOR="Green"]
[LIST]
[*]Build with Linaro 13.07 gcc 4.8.2 (arm-gnueabi by [user=4825437]@Christopher83[/user])
[*]Franco latest commits
[*]Some small improvements to compilation and fixes
[/LIST][/COLOR]
[B][COLOR="Red"]Blue Panda r66:[/COLOR][/B]
[COLOR="Green"]
[LIST]
[*]Merged updated ASIX AX88* driver to version 4.8
[*]Latest franco commits
[*]Some small improvements and fixes
[/LIST][/COLOR]
[B][COLOR="Red"]Blue Panda r65:[/COLOR][/B]
[COLOR="Green"]
[LIST]
[*]Latest franco commits
[*]Some improvements and fixes
[/LIST][/COLOR]
[B][COLOR="Red"]Blue Panda r64:[/COLOR][/B]
[COLOR="Green"]
[LIST]
[*]Linaro 13.06 gcc 4.8.2 builded
[*]Merged from latest franco commits
[*]Disabled zRAM (not seeing benefit from it on my tests)
[/LIST][/COLOR]
[B][COLOR="Red"]Blue Panda r55:[/COLOR][/B]
[COLOR="Green"]
[LIST]
[*]Build with arm-eabi Linaro 13.06 GCC 4.8.2
[*]Tweak configs and compiler settings
[/LIST][/COLOR]
[B][COLOR="Red"]Blue Panda r52:[/COLOR][/B]
[COLOR="Green"]
[LIST]
[*]Build full -O3 with Linaro 13.06 GCC 4.8.2
[*]SLUB memory management build
[*]Merged Linux 3.1.10 (franco based)
[*]Latest franco r65
[*]zRAM enabled
[*]MultiROM support (kexec)
[*]Several TCP Congestion Control (westwood default)
[*]I/O scheduler tunables (default 512 deadline, 1024 advised for performance)
[*]CPU governor tunables (default intereactive 204-1300MHz for battery and performance), Hotplug Control, MPU voltages tunables
[*]WiFi high performance, Smart Dimmer, FSync GPU Scaling controls (GPU 416 default battery and performance)
[*]Tweak configs and compiler settings
[/LIST][/COLOR]
[B][COLOR="Red"]Blue Panda r44:[/COLOR][/B]
[COLOR="Green"]
[LIST]
[*]Using outstanding franco kernel base
[*]Merged Linux 3.1.10 changes
[*]Fixed and improved Linaro 13.05 gcc4.8.1 build.
[*]Merged from latest franco r64 and picked some tweaks from a couple sources
[*]zRAM enabled
[*]Optimizations to makefile, defconfigs and compiler in order to streamline final build
[*]Will try to port Sweep2wake to grouper in near future :fingers-crossed:
[/LIST][/COLOR]
Thanks to @franciscofranco, @faux123, @LaboDJ @show-p1984, @Metallice, @anarkia1976
Special thanks to @DariosF and @ciprianruse88, for the friendship, initial push, knowledge and art.
Kernel files hosted @ nexus4.longren.org, kindly provided by @tlongren. Powered by vpsstat.us
Extra: Awesome signature and wallpaper by @ciprianruse88
source github
Looks awesome! Will try it out! Any chance you could add CPU overclocking and custom brightness levels? Two of the only reasons why I don't use Franco Kernel
Gives me the confidence to release my own kernel. Great.
WOW!!! Great work my friend!!! :good:
DariosF said:
WOW!!! Great work my friend!!! :good:
Click to expand...
Click to collapse
Thanks mate, learned with one of the best!
Go Purity Team :highfive:
Downloading... Thanks.
Enjoying it now, will report back if I found something wrong. xD
Go Purity!
The only thing that this kernel is missing is usb-otg support. I would love to see it added if possible.
FierceMist said:
The only thing that this kernel is missing is usb-otg support. I would love to see it added if possible.
Click to expand...
Click to collapse
It has USB-OTG support, I even tune it, just forgot to add to list lol
I've been using Purified Kernel for over a month. It's very smooth and excessive battery drain is absolutely minimal. :good:
STXInnovation said:
I've been using Purified Kernel for over a month. It's very smooth and excessive battery drain is absolutely minimal. :good:
Click to expand...
Click to collapse
Can you tell me how the battery behaves on this kernel with gaming(be it light, med or heavy) and music/video content ?
iAndroidOS said:
Can you tell me how the battery behaves on this kernel with gaming(be it light, med or heavy) and music/video content ?
Click to expand...
Click to collapse
Sure. Here are my battery statistics as of right now.
My tablet has been unplugged for 2 days and 12 hours from the time of this post.
Screen has been on 2 hours and 30 minutes.
When I'm using my tablet, I do several things: browse the web, watch YouTube, play some games, browse Reddit using Reddit is Fun, text using Google Voice, and check on email/news/weather.
My current battery level is at 65%. I'm using the latest version of PurityROM.
Battery drainage is what I expect from my use.
eng.stk said:
It has USB-OTG support, I even tune it, just forgot to add to list lol
Click to expand...
Click to collapse
That's weird. I tried using my USB drive with purity+purified kernel but I was unable to mount it. When I switched back to m-kernel it worked just fine. I'll give it another go when the next update comes out.
FierceMist said:
That's weird. I tried using my USB drive with purity+purified kernel but I was unable to mount it. When I switched back to m-kernel it worked just fine. I'll give it another go when the next update comes out.
Click to expand...
Click to collapse
I wonder if it's native support, or do you need something like stickmount?
EDIT: Just tested and it does not appear to be native, probably would work with stickmount like franco's kernel.
Mike T
webdroidmt said:
I wonder if it's native support, or do you need something like stickmount?
EDIT: Just tested and it does not appear to be native, probably would work with stickmount like franco's kernel.
Mike T
Click to expand...
Click to collapse
Yes, just install stickmount
Thank you eng.stk for this awesome kernel. Super smooth and battery friendly with purity ROM :thumbup:
sent from my AOSPA3+ Nexus⁴ with Tapatalk 4
Hi, Could you add Ad-Hoc/BSSI wifi support? m-kernel I think has it. and many roms support it.
that would be a killer feature for this kernel... you can create ad-hoc wifi from laptop or desktop and connect to your nexus tablet.
cheers.
brfsa said:
Hi, Could you add Ad-Hoc/BSSI wifi support? m-kernel I think has it. and many roms support it.
that would be a killer feature for this kernel... you can create ad-hoc wifi from laptop or desktop and connect to your nexus tablet.
cheers.
Click to expand...
Click to collapse
Don't really see benefit from this, I already access the pc from ES file explorer and I don't own a laptop....
Sent from my Nexus 7 using Tapatalk 4 Beta
Does this kernel support init.d?
Sent from my Nexus 7
workes on AOSP based ROMZ
just like:
-CM11 -TeamEOS AOSP -pacman nightly -beanstalk -carbonrom -liquismooth
and more...
AGK-Kernel Features:
- CPU UC/OC 81 mhz - 1836 mhz
- CPU Volt Controll
- GPU UC/OC 128 mhz - 487 mhz (only in special Version) PM
CPU Governor:
-smartmax -interactive -conservative -ondemand -userspace -powersave -Lionheart -performance -badass -intellidemand
-intelliactive -smartassV2 -lagfree -nightmare -wrexy
Scheduler:
-noop -deadline -row -cfg -fiops -sio
Wake:
-sweep2wake -flick2wake -flick2sleep -doubletap2wake -home2wake -pick2wake -pocket detection -logo2menu
-Zimage is XZ compressed
-Add some Bluetooth driver
-Add Generic Dynamic Voltage and Frequency Scaling (DVFS) support
-Add HTC GPIO headset detection driver
-Add Line6 USB support
-Add intelli Plug new
-Add alucard hotplug new
-Add MSM Hotplug new
-Add CPR (core power reduction) new
Hotplug:
its always mpdecision and intelliplug.
if somebody like others like MSM or Alu, i can Build it!
I have switched to new fresh Kernel Source. The old builds are working with the most AOSP Romz. If you cant switch on wifi, try the new AGK Kernel. Download and source code will be here in thread! I let the old build online, so you can choose the best Kernel for you! Every Custom Rom is special, so just try!
Download new Kernel:
AGK-CM-BASED-v1.4.zip - 4.08 MB
AGK-CM-BASED v1.3-Aroma.zip - 8.53 MB
AGK-CM-BASED-v1.3.zip - 4.08 MB
AGK-CM-BASED-v1.3 - OC-VERSION.zip - 4.08 MB ATTENTION USE IT AT YOUR OWN RISK CPU up to 2.1GHz GPU up to 487MHz
AGK-CM-BASED v1.2-Aroma.zip - 8.52 MB
AGK-CM-BASED-v1.2.zip - 4.07 MB
AGK-CM-BASED-v1.1.zip - 4.08 MB
AGK-CM-BASED-v1.0.zip - 4.07 MB
Link to source: https://github.com/antaril/AGK-CM-BASED
History:
AGK CM Based Kernel v1.4
-add simple GPU Governor
-add intellim Governor
-add AGK-Lollipop features (GPU UC/OC CPU OC/UC options)
AGK CM Based Kernel v1.3
-add more scheduler
-fix pocket detection,pick2wake and flick2wake for all AOSP Roms
-merge new CM comits
AGK CM Based Kernel v1.2
-add a lot of fixes and stuff
-fix wake gestures
-add sound control
AGK CM Based Kernel v1.1
-Set VM_MAX_READAHEAD to 2048
-update intelliplug code
-overclock slimbus for best audio quality!!
-add more cpu stepps... OC and UC
-give more vcore room. For OC and UC
-Adding h2w/l2w/s2w/logo2menu/long tap sleep
AGK CM Based Kernel v1.0
-add sound control
-add intelli plug
-add governors
-add sheduler
-add volt controll
-add tweaks
-add CPU UC and little OC
-add bln
-add hotplugs
more coming soon...
Click to expand...
Click to collapse
----------------------------------------------------------------------------------------------------------------------
OLD KERNEL (stopping dev)
Link to source: https://github.com/antaril/AGK
Click to expand...
Click to collapse
History:
AGK Kernel v1.19
-refresh WIFI code
-refresh bluetooth code
AGK Kernel v1.18
-Set VM_MAX_READAHEAD to 2048
-change vref_core if oc is enable
-add ultra low cpu clock (81mhz)
-set lower .vreg[VREG_CORE] if OC is disabled
AGK Kernel v1.17
-add custom boot animation
-try to fix installation bug by 0% please report
-try to fix some wifi problems please report!!
AGK Kernel v1.16
-add "blinkin button mod" change it in AROMA
-fixing pocket detection when suspended
AGK Kernel v1.15
-fix intelli plug
-add msm hotplug (not active)
AGK Kernel v1.14
-add intelli plug
-add alucard hotplug (not active)
-add CPR (core power reduction)
-add wrexy governor
-add nightmare governor
-add Modules support
AGK Kernel v1.12
-Add Generic Dynamic Voltage and Frequency Scaling (DVFS) support
-Add HTC GPIO headset detection driver
-Add Line6 USB support
AGK Kernel v1.11
- compiled with XZ compression
AGK Kernel v1.1
-standard Governor smartmax
-standard Scheduler fiops
-Linaro 4.7 compiled
-Bluetooth fix
new Governors
-intellidemand
-intelliactive
-smartassV2
-badass
-lagfree
new Schedulers
-fiops
-sio
Click to expand...
Click to collapse
DOWNLOAD:
AGK Kernel v1.19
Aroma Link:AGK_Kernel - v1.19-Aroma.zip - 8.51 MB
AGK Kernel v1.18
Aroma Link: AGK_Kernel - v1.18-Aroma.zip - 8.52 MB
Non Aroma Link: AGK_Kernel - v1.18-nonAroma.zip - 4.07 MB
-Set VM_MAX_READAHEAD to 2048
-change vref_core if oc is enable
-add ultra low cpu clock (81mhz)
-set lower .vreg[VREG_CORE] if OC is disabled
Special Versions:
AGK_Kernel - v1.24-DU.zip - 4.03 MB Based on MSM9860 Kernel Source! Once createt especially for Dirty Unicorns Rom, now it works with a lot AOSP based ROMZ.
AGK_Kernel - v1.15-Aroma.zip - 8.52 MB OC-VERSION only for people who know what they do!!
AGK_Kernel - v1.15-MSM-Aroma.zip - 8.52 MB MSM Hotplug
AGK_Kernel - v1.15-alu-Aroma.zip - 8.52 MB alucard hotplug
AGK_Kernel - v1.15-nohot-Aroma.zip - 8.52 MB no alternative hotplugs!!
AGK_Kernel - v1.15.zip - 3.79 MB classic recovery
thx to: faux123, team7, neobuddy89, myfluxi, Se Hun Kim, and especially AuxXxilium for his help!!!
Desperately wating for AOSP KERNEL. thanks man:::
does it has AROMA INSTALLER.....?
hiimimtayaz said:
Desperately wating for AOSP KERNEL. thanks man:::
does it has AROMA INSTALLER.....?
Click to expand...
Click to collapse
no classic recovery
Antaril said:
Here is my own Kernel! Try and give responce please!
Click to expand...
Click to collapse
Can we get a link to your kernel source please.
Thanks.
Andy said:
Can we get a link to your kernel source please.
Thanks.
Click to expand...
Click to collapse
sorry iam from germany, so my english is not very good.
the source is on my computer.
i download the ground source from github and add OC/UC governors,scheduler and some patches.
iam not a coder, i think iam a modder! sorry i hope this is ok
i can upload my source to github if this is possible
Antaril said:
i can upload my source to github if this is possible
Click to expand...
Click to collapse
Yes please. In order to be GPL compliant, the source required to build the exact same kernel needs to be available.
Thanks.
Andy said:
Yes please. In order to be GPL compliant, the source required to build the exact same kernel needs to be available.
Thanks.
Click to expand...
Click to collapse
In first post, you can see the link to source code!
Antaril said:
In first post, you can see the link to source code!
Click to expand...
Click to collapse
Thank you very much.
Andy said:
Thank you very much.
Click to expand...
Click to collapse
you are welcome
I wanted a AOSP kernel as well. we have over 20 kernels all are sense. finally. thanks,
Will try, finally a kernel with s2w and dt2w, thanks!
Sent from my HTC One using XDA Premium 4 mobile app
first hardcore AOSP kernel and the guy only has a few likes? c'mon people, I don't even use AOSP, but that $h17 deserves some thanks!
Needs a better download host or a mirror ..site won't load on my cell and I won't install a third party app to download it
Sent from my One using XDA Free mobile app
Yeah...we need a download source that doesn't require an app. Then I'll give it a go.
Sent from my One using XDA Premium 4 mobile app
chillybean said:
Needs a better download host or a mirror ..site won't load on my cell and I won't install a third party app to download it
Click to expand...
Click to collapse
badams1 said:
Yeah...we need a download source that doesn't require an app. Then I'll give it a go.
Sent from my One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Please find here a Mirror. If the author of the kernel has anything against the mirror, please let me know otherwise he may do with it whatever he wants
Mirror at zippyshare
Here's another mirror:
https://www.dropbox.com/s/sap95hm0j7fsvkz/AGK_Kernel - v1.11.zip
Sent from the Thing that should not be.
Finaly. Anyone tested on liquidsmooth
Sent from my One using Tapatalk
thx "No_Fear"
add link to first thread
Thanks for supporting aosp
Inviato dal mio HTC One utilizzando Tapatalk
Downloading now. Always appreciative for additional options.
Sent from my One