Database Info

.:|Help I Brick my Infuse|:.

Hello all,
Yesterday I was trying to flash JB, flash it successfully but then when i need to flash gapps the rainbows inside recovery was so annoying that i try to flash a GB bootloader, I think because the driver or something else the flash wasn't right and since then I got a expensive paperweight. Trying to boot in download mode the phone turn on showing a completely white screen for about 3 seconds then the phone turn off and thats is a eternal loop. turn on > white screen > turn off. When the screen is white ODIN and Heimdall recognize the phone but the device simply turn off after seconds so is impossible to flash something.
Today i got a JIG MicroUSB try to boot in Download Mode with it but does not work.
Help I read several threads along XDA but nothing could help by now.
Thanks in advance

I sure hope that you tried flashing some other things using Heimdall or Odin before using your choice of software to flash bootloaders.
In this state you're in, have you tried the battery pull, hold volume buttons, plug in usb, put battery back in, continue holding power button method to enter download mode?
If you can get to download mode this way, you aren't bricked.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Seems to me you have definitely bricked it :s A bootloader flash is practically the only way our phone can be bricked. That is why it is recommended to flash other things first to make sure odin has no issues with drivers and such
Sent from my sweet and buttery Infuse

Sure I flash another things, and yes I try all the combo buttons to enter in download mode. Nothings happens i can't get into download mode.
In case that I hardbrick my device there is another easy solution.

andros11 said:
Seems to me you have definitely bricked it :s A bootloader flash is practically the only way our phone can be bricked. That is why it is recommended to flash other things first to make sure odin has no issues with drivers and such
Sent from my sweet and buttery Infuse
Click to expand...
Click to collapse
You may be right, but we don't know for sure that he's bricked yet. We've seen several close calls where the Infuse has made it through - even after a borked bootloader flash.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

p|p3 said:
Sure I flash another things, and yes i try all the combo buttons to enter in download mode. Nothings happens i can't get into download mode.
Click to expand...
Click to collapse
Can you confirm that you pulled the battery?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

jscott30 said:
Can you confirm that you pulled the battery?
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Yep a lot of times.

You mention that Odin sees the device for a moment before the device loops. As a last ditch effort, you may be able to issue an "adb reboot download" command using adb on your PC. No guarantee that this will work, but it's worth a shot.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

Gotta try to issue the command at the same moment that Odin sees the device.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2

jscott30 said:
You mention that Odin sees the device for a moment before the device loops. As a last ditch effort, you may be able to issue an "adb reboot download" command using adb on your PC. No guarantee that this will work, but it's worth a shot.
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
Bro i'll be so glad if may you can guide me on this or give a link. Much thanks. :laugh:

p|p3 said:
Bro i'll be so glad if may you can guide me on this or give a link. Much thanks. :laugh:
Click to expand...
Click to collapse
You can download what you need for adb from here: http://d-h.st/2mi
Extract the zip package, browse to the unzipped folder where you'll see adb.exe and some other files. Place all of those files in the Windows folder on your C:\\ drive. Then, press the Windows key on your keyboard + R so that the "Run" prompt appears. Type cmd and then press enter. In the command prompt, type this just as Odin sees your device (keep an Odin window open to be sure):
Code:
adb reboot download
The problem is, if both your primary and secondary bootloaders are screwed up, you may never get into download mode. It's worth a shot to try, though.

I agree jscott, I believe there's still hope !
I have managed to rescue my infuse from some dark moments.. once I used this one-click unbrick and I managed to save it.
See if you have my same luck with it

Through ADB Shell was imposible that recognize the device, JAVA One Click works for a moment like Odin but the device desconnected so is not much what i can do. Here post a PIC of what a can reach through ODIN so my question will be if i can make ODIN doesn't check MD5's and flash direct or something similar.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Anyway for now i aprecciate all your answers, i'm sure that out there there is a solution.

p|p3 said:
Through ADB Shell was imposible that recognize the device, JAVA One Click works for a moment like Odin but the device desconnected so is not much what i can do. Here post a PIC of what a can reach through ODIN so my question will be if i can make ODIN doesn't check MD5's and flash direct or something similar.
Anyway for now i aprecciate all your answers, i'm sure that out there there is a solution.
Click to expand...
Click to collapse
Sorry, but neither Odin or Heimdall will work unless you are able to get the phone into download mode. If it turns out that you really have borked the bootloaders, you won't be able to get into download mode. Someone will have to make a jtag repair like in the video below to restore your phone. The guys in this video are reputable and can fix it.:
http://www.youtube.com/watch?v=H4zwn_HMTek

jscott30 said:
Sorry, but neither Odin or Heimdall will work unless you are able to get the phone into download mode. If it turns out that you really have borked the bootloaders, you won't be able to get into download mode. Someone will have to make a jtag repair like in the video below to restore your phone. The guys in this video are reputable and can fix it.:
http://www.youtube.com/watch?v=H4zwn_HMTek
Click to expand...
Click to collapse
Thanks man, yep looks like I screw both bootloaders, unfortunately the guys in the video are in the states but I from Colombia so may be difficult and also expensive send my phone for that fix, anyway today looks like i find someone that could fix my phone using the JTAG cable and box for about USD$50.
Any solution that finallly find to fix my phone i'll be posting here.

Here's a thought have you tried a different USB cable and USB slots. I have 2 phones one likes to connect to front of my PC the other in the back. Plus USB cables get worn out a new one may connect better.
Sent from my SGH-I997 using xda premium

Try taking your battery out for a few hours..or better yet, a day. Charge your battery fully using an external source or use a different fully charged battery, after a day and then try again.

darkchyldx101 said:
Here's a thought have you tried a different USB cable and USB slots. I have 2 phones one likes to connect to front of my PC the other in the back. Plus USB cables get worn out a new one may connect better.
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
Did it same result, definitely its not the cable. Thanks anyway
qkster said:
Try taking your battery out for a few hours..or better yet, a day. Charge your battery fully using an external source or use a different fully charged battery, after a day and then try again.
Click to expand...
Click to collapse
Did it too, same result thanks to you too.
JTAG will be

Did you have success restoring with Odin/Hiemdall???
You should of started off fresh, a complete wipe/restore and then the bootloaders <(assuming you had success with
wipe/restore....) It sounds like a JTag is ur only option

I was flashing a kernel and my cord came loose handbills couldn't get anywhere either. Didn't get white screen just a picture of a phone some dots a triangle more dogs and a computer. I found something called one click unbrick. I know you are a different situation than I am but it's worth a shot maybe.
This post brought to you by the letters Paranoid, Ice, Cream and Sandwich.

[Q] a big Bootloop problem

ok where to start. i have a Galaxy s2 Boost mobile Phone. and well i installed Legacypatch cm-10-m7.1 as my new ROM it Was Working Fine intill well i was listening to music while on a run well umm it sorta fell out of my pocket and hit the ground then i found out it shut off i couldnt turn it back on thinking my phone was dead i ignored the problem intill i plug it in a Charger then i would just get the the Alien Tech Boot Section and keep resetting it self without letting me get to the CWM boot recovery so i thought it was a display or even a battery problem intill i put said battery in my other s2 and it worked fine then i plugged my phone into my cpu i Can Actullay get to the CWM that way so i wiped Data/Cache/Delvik/and Even System then tried to reinstall but it seems to Reboot in the middle of The Installtion. thank god i had redbean 7 final on my sd card to so i install that and it says it installed just reboot so i did It passes the Alien Part and goes to the redbean Screen Then Resets then again Keep Reseeting at the Alien Part So my Question is How Can i fix this? i only have those 2 rom's on my sd card And My CPU Cant Seem To find the so called Device to read. so im kinda stuck on trying to install a new Rom so what do i do?

Wrong forum guy
Sent from my GT-I9105P using xda app-developers app

MakoKuu said:
ok where to start. i have a Galaxy s2 Boost mobile Phone. and well i installed Legacypatch cm-10-m7.1 as my new ROM it Was Working Fine intill well i was listening to music while on a run well umm it sorta fell out of my pocket and hit the ground then i found out it shut off i couldnt turn it back on thinking my phone was dead i ignored the problem intill i plug it in a Charger then i would just get the the Alien Tech Boot Section and keep resetting it self without letting me get to the CWM boot recovery so i thought it was a display or even a battery problem intill i put said battery in my other s2 and it worked fine then i plugged my phone into my cpu i Can Actullay get to the CWM that way so i wiped Data/Cache/Delvik/and Even System then tried to reinstall but it seems to Reboot in the middle of The Installtion. thank god i had redbean 7 final on my sd card to so i install that and it says it installed just reboot so i did It passes the Alien Part and goes to the redbean Screen Then Resets then again Keep Reseeting at the Alien Part So my Question is How Can i fix this? i only have those 2 rom's on my sd card And My CPU Cant Seem To find the so called Device to read. so im kinda stuck on trying to install a new Rom so what do i do?
Click to expand...
Click to collapse
Not a big problem though.. You are in bootloop,in order to get out of it. If cwm is working then go there and wipe everything. After that go to DOWNLOAD Mode and flash your sock ROM of your phone. It wil surely work.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

ty
Ok umm 1. Sorry for posting in wrong Section please forgive me yeah my cwm works fine but how Exactly do i wiper everything you mean data/cache/delvik/system? also how do i get back into Download Mode with cwm i am aware it useally like hold volume up and power button but that also goes to cwm for me it doesnt do the download mode

safariking said:
Wrong forum guy
Sent from my GT-I9105P using xda app-developers app
Click to expand...
Click to collapse
Try home+power+volume down
Sent from my GT-I9105P using xda app-developers app

safariking said:
Try home+power+volume down
Sent from my GT-I9105P using xda app-developers app
Click to expand...
Click to collapse

no luck i tried both power+volup+home and power+voldown+home there both just going to CWM mode also do i have to delete CWM? before tring to go into Download mode? if so how?

MakoKuu said:
no luck i tried both power+volup+home and power+voldown+home there both just going to CWM mode also do i have to delete CWM? before tring to go into Download mode? if so how?
Click to expand...
Click to collapse
Not needed you can only delete cwm by flasing the stock recovery or a stock rom with odin!
Maybe you should go to the Galaxy S2 forums and ask it there!

[q] help - phone won't even boot anymore

I have a strange issue with my GS3 Verizon. I was running Clean ROM 4 and then recently wiped it and put Clean Rom 7.0 on it. Everything was working fine until last week it started just powering off randomly. So i'd pull the battery, reboot, and voila, it worked for a while until it randomly powered down again. Today i was thinking maybe it was Clean Rom causing this so I wiped it and installed Wicked Sensations. The problem only worsened. It started powering down like every minute. Now not eve a battery pull will get the phone back on.
Verizon is sending me a replacement, but i have to get this phone unrooted and back to stock so i don't have to pay a 300 dollar fee.
Can anyone PLEASE help me get this done? I have Samsung Drivers and Oden but doesn't recognize this blank screen device...
Thanks
Tommy

Voyaging said:
I have a strange issue with my GS3 Verizon. I was running Clean ROM 4 and then recently wiped it and put Clean Rom 7.0 on it. Everything was working fine until last week it started just powering off randomly. So i'd pull the battery, reboot, and voila, it worked for a while until it randomly powered down again. Today i was thinking maybe it was Clean Rom causing this so I wiped it and installed Wicked Sensations. The problem only worsened. It started powering down like every minute. Now not eve a battery pull will get the phone back on.
Verizon is sending me a replacement, but i have to get this phone unrooted and back to stock so i don't have to pay a 300 dollar fee.
Can anyone PLEASE help me get this done? I have Samsung Drivers and Oden but doesn't recognize this blank screen device...
Thanks
Tommy
Click to expand...
Click to collapse
Yes, flash this http://www.androidfilehost.com/?fid=23134718111254196 with Odin. That's it....if you can boot into recovery mode.

buhohitr said:
Yes, flash this http://www.androidfilehost.com/?fid=23134718111254196 with Odin. That's it....if you can boot into recovery mode.
Click to expand...
Click to collapse
How can I flash when the phone won't even power up? I can't get it to go into recovery or anything right now. Oden doesn't recognize anything either (i'm assuming because there's no power to the device?)

Voyaging said:
How can I flash when the phone won't even power up? I can't get it to go into recovery or anything right now. Oden doesn't recognize anything either (i'm assuming because there's no power to the device?)
Click to expand...
Click to collapse
So you can't turn on the phone even with the power plug in? is there any indication where the phone has power, like vibrating, flashing light, sound etc..? I don't think your phone is brick, most likely hardware issue since it's acting up before it die.

Exactly...there is no sign of power whatsoever. Verizon is sending a replacement but i'm worried they'll figure out it's rooted w a custom ROM flashed...so i was hoping to find a way to get unrooted and back to stock before it is sent back to them...

BUT I will say....when i plug the phone into my mac, i get the dialog box from VMWare fusion that asks do you want this device connected to Mac or Windows...but then Oden doesn't see it on Windows side and Android File Transfer won't notice it on mac side...but at least there's recognition that SOMETHING was just plugged in to the machine... hope?

Voyaging said:
BUT I will say....when i plug the phone into my mac, i get the dialog box from VMWare fusion that asks do you want this device connected to Mac or Windows...but then Oden doesn't see it on Windows side and Android File Transfer won't notice it on mac side...but at least there's recognition that SOMETHING was just plugged in to the machine... hope?
Click to expand...
Click to collapse
So pretend the screen is dead, boot it into download mode,(hold down the 3 buttons) wait 30 sec, then connect the phone to your pc see if your pc see the phone through Odin.(even though the screen is black).
Edit: I think you having hardware issue, but it's not hurt to try the hardbrick method just for the hell of it http://forum.xda-developers.com/showthread.php?t=2581166

buhohitr said:
So pretend the screen is dead, boot it into download mode,(hold down the 3 buttons) wait 30 sec, then connect the phone to your pc see if your pc see the phone through Odin.(even though the screen is black).
Click to expand...
Click to collapse
just tried that again...nothing.

Voyaging said:
just tried that again...nothing.
Click to expand...
Click to collapse
see my edited previous post.

buhohitr said:
see my edited previous post.
Click to expand...
Click to collapse
will do. here is the message i get when i plug the phone back into the micro USB end:
https://drive.google.com/file/d/0B9Gryr4xs3QId3VRZGdyUHJySnM/edit?usp=sharing
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Help! Can't get Flashtool to switch phone to DL mode

So I'm trying to go back to stock rom with flashtool. Everything sets up and goes fine until it tries to switch phone to DL mode. IT fails 15 seconds in and then nothing happens.
Any ideas? Tried every usb port and every cable (3 of them) and it's the same thing every goddamn time.
Here is what I get.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

ComradeZ said:
So I'm trying to go back to stock rom with flashtool. Everything sets up and goes fine until it tries to switch phone to DL mode. IT fails 15 seconds in and then nothing happens.
Any ideas? Tried every usb port and every cable (3 of them) and it's the same thing every goddamn time.
Here is what I get.
Click to expand...
Click to collapse
Are you not putting your device in download mode first? You must first place the phone into download mode yourself. Also make sure those USB ports are USB 2.0. USB 3.0 will cause that exact error your getting as well.
Sent from my iPhone using Tapatalk

Yup. USB 2.0. Yes, I put the phone in to DL mode before plugging it in. Sometimes it flashes almost all the way then gets as far as checking minios then blue factory reset screen and I'm stuck there due to flashtool failing to read the phone -again-.

ComradeZ said:
Yup. USB 2.0. Yes, I put the phone in to DL mode before plugging it in. Sometimes it flashes almost all the way then gets as far as checking minios then blue factory reset screen and I'm stuck there due to flashtool failing to read the phone -again-.
Click to expand...
Click to collapse
Remember it's almost always going to fail after 80%. That's supposed to happen as the reset is just rebooting. Since your getting mini os did you reflash choose board_dl?
Sent from my iPhone using Tapatalk

No, I used update dl, what flashtool was set at when I installed it.
Edit: And now I cannot get into DL mode anymore. Just a minios thing then a blue screen with the number 2 and 'Factory reset' on it.
Can't do anything otherwise. Stuck there.
GD, I hate this phone.

ComradeZ said:
No, I used update dl, what flashtool was set at when I installed it.
Edit: And now I cannot get into DL mode anymore. Just a minios thing then a blue screen with the number 2 and 'Factory reset' on it.
Can't do anything otherwise. Stuck there.
GD, I hate this phone.
Click to expand...
Click to collapse
You've tried pulling the battery, putting it back in and doing the button combination while plugging in the USB cable?
Sent from my iPhone using Tapatalk

hyelton said:
You've tried pulling the battery, putting it back in and doing the button combination while plugging in the USB cable?
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Just did that 4 times and finally got it to DL mode. I set flashtool to board dl and am now reflashing.
Edit: Flashing complete, but now stuck at AT&T Mini OS 3.1 screen with a 'Auto touch test: Dont touch the screen' with an 'ok' button under it.
When will the madness end??

ComradeZ said:
Just did that 4 times and finally got it to DL mode. I set flashtool to board dl and am now reflashing.
Edit: Flashing complete, but now stuck at AT&T Mini OS 3.1 screen with a 'Auto touch test: Dont touch the screen' with an 'ok' button under it.
When will the madness end??
Click to expand...
Click to collapse
Not sure what you mean by madness? That screen is normal you use the vol up and down and power button to choose reset or reboot..
Sent from my iPhone using Tapatalk

hyelton said:
Not sure what you mean by madness? That screen is normal you use the vol up and down and power button to choose reset or reboot..
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Ok, got back to stock finally. Just rebooted the phone. Now to figure out a way to root it without bricking again.

ComradeZ said:
Ok, got back to stock finally. Just rebooted the phone. Now to figure out a way to root it without bricking again.
Click to expand...
Click to collapse
Glad you got it back to stock
Sent from my iPhone using Tapatalk

Galaxy Note 10.1 dead?

Hi! I have a big problem with my tablet... after flashing Lineage OS we had two happy month, but one day I turned on the device and a message appeard. The tablet couldn't find the internal memory.
So I went in recovery, I wiped everything, but I couldn't flash because internal memory wasn't in list!
So I turned off and on, and now it is almost dead.
The screen turns on when I charge it, but it freeze on the battery loading icon.
When remove the cable, the image is still here.
To turn off, I have to press alla the buttoms together for some seconds.
Is it dead? What can I do? I can't boot it or access to recovery.
Thank you!

SEE multiple posts /
https://forum.xda-developers.com/search/forum/1737?query=fail to boot
Step one would be to flash stock firmware via Odin.

JJEgan said:
SEE multiple posts /
https://forum.xda-developers.com/search/forum/1737?query=fail to boot
Step one would be to flash stock firmware via Odin.
Click to expand...
Click to collapse
But I can't turn it on, how can I flash with Odin on a turned off device?

No download mode ??
Service repair or bin it.

Enbert said:
Hi! I have a big problem with my tablet... after flashing Lineage OS we had two happy month, but one day I turned on the device and a message appeard. The tablet couldn't find the internal memory.
So I went in recovery, I wiped everything, but I couldn't flash because internal memory wasn't in list!
So I turned off and on, and now it is almost dead.
The screen turns on when I charge it, but it freeze on the battery loading icon.
When remove the cable, the image is still here.
To turn off, I have to press alla the buttoms together for some seconds.
Is it dead? What can I do? I can't boot it or access to recovery.
Thank you!
Click to expand...
Click to collapse
No, its not my friend, you just need to do some intense reading, you will need to revert back to stock rom via odin before you do anything else!..

cris royal (Elec) said:
No, its not my friend, you just need to do some intense reading, you will need to revert back to stock rom via odin before you do anything else!..
Click to expand...
Click to collapse
How can I flash via odin if I can not turn it on?
This is the only image showed by the screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Sorry but that poster was talking nonsense again .Not even bothering to read your problem .

Enbert said:
How can I flash via odin if I can not turn it on?
This is the only image showed by the screen:
Click to expand...
Click to collapse
Did you download the Stock ROM?. first thing first download the stock.. .. there is a post up above by JJEgan with a link for Samsung Note 10.1 I'm not sure which of the variant you have so the rest is pretty much up to you, if you don't comprehend easily you should watch a tutorial on YouTube about flashing stock rom on the note 10.1 ...
Enbert?.. you don't need to "turn on" the tablet to flash it with Odin, you just need to be in "Download Mode".. by holding the Volume down button then the power button until the screen is Sky blue.. try putting it in download mode now & let me know....
AND YOU SHOULD CONSIDER THANKING PEOPLE WHEN THEY RENDER ASSISTANCE & THEIR TIME, POST OF WISDOM, THERE IS A THANKS BUTTON, USE & PRESS IT MORE WHILE.

How can he flash via Odin when phone cannot boot to download mode.
Asking for thanks is against XDA. Rules.

JJEgan said:
How can he flash via Odin when phone cannot boot to download mode.
Asking for thanks is against XDA. Rules.
Click to expand...
Click to collapse
ii agree with you! he highlighted he didn't know how to why i mentioned how to.
I wasn't "asking" for thanks, I was suggesting he thanked you being that you explained and appointed a link to him long before I tried to. ?

I do not know how to thanks via smartphone, I don t know very well this forum, sorry for not sending a "thanks".
Writing "turn on" I didn t mean boot android, sorry for the misunderstanding. I mean turn on in recovery, download or anything else.

Yes no download mode is the problem.
Thanks are up to you and nobody else .Thats XDA rules.
Personally i dont need them at all .

Enbert said:
Hi! I have a big problem with my tablet... after flashing Lineage OS we had two happy month, but one day I turned on the device and a message appeard. The tablet couldn't find the internal memory.
So I went in recovery, I wiped everything, but I couldn't flash because internal memory wasn't in list!
So I turned off and on, and now it is almost dead.
The screen turns on when I charge it, but it freeze on the battery loading icon.
When remove the cable, the image is still here.
To turn off, I have to press alla the buttoms together for some seconds.
Is it dead? What can I do? I can't boot it or access to recovery.
Thank you!
Click to expand...
Click to collapse
have you tried to reflash the stock rom? if not try to reflash it

Please read thread first.

Anything like this?
Google "Samsung Galaxy Tab 2 10.1" - stuck in an infinite loop" and go to the youtube video by Ken Pugh and read the comments...