This is a mod based on the libraries Beats, completely replaces audioconfig Smart, does not increase the volume (and other fashion), only the sound quality.
With third-party players who themselves process the sound and ignore the system settings (such as poveraimp) not working (it will work if you turn off this processing in the player settings) as BeatsEQ this system EQ it works with system applications and change the sound when listening to Music, Video, WEB (Internet), BLUETOOTH, and other audio streams system.
Installation CWM
Put on a clean system.
4.2.2 ODEX / DEODEX
Backup before installing.
Backup is the only way to roll .
(a lot of files , and then pull them out of the firmware problem , especially as some stock is replaced.)
For S4 I9500
Downloads
For S4 I9505
Downloads
What does this specifically do?
I was wondering this mod have?
Paolonicus said:
I was wondering this mod have?
Click to expand...
Click to collapse
This mod - library Beets and Dolby mobile.
Changed sound config.
I tried on SII 4.1.2 and it works good
Angelkom said:
I tried on SII 4.1.2 and it works good
Click to expand...
Click to collapse
O.K.
Doesn't work on rooted Nexus 4.
Sent from my Nexus 4 using xda premium
Does this only improve the bass? No contribution to the volume?
Paolonicus said:
Does this only improve the bass? No contribution to the volume?
Click to expand...
Click to collapse
It is just a good sound and good bass. :good:
There is an increase in the volume of the headphones , if you need I can give.
Installation CWM:
Many thanks!
noskojv said:
It is just a good sound and good bass. :good:
There is an increase in the volume of the headphones , if you need I can give.
Installation CWM:
Click to expand...
Click to collapse
Many thanks! Not only this mod improved clarity and bass, you also helped me with the issue I have with the volume!
Hello,
Will the improved Headphone Volume MOD work on the 9505, too or only 9500?
Lienot said:
Hello,
Will the improved Headphone Volume MOD work on the 9505, too or only 9500?
Click to expand...
Click to collapse
Yes.
noskojv said:
Yes.
Click to expand...
Click to collapse
Happen to know if this zip will work on the i337M? The beats part, not the headphones part
Sent from my SGH-I337M using xda premium
prking07 said:
Happen to know if this zip will work on the i337M? The beats part, not the headphones part
Sent from my SGH-I337M using xda premium
Click to expand...
Click to collapse
Make a backup and check please. I think should work. Let me know.
noskojv said:
Make a backup and check please. I think should work. Let me know.
Click to expand...
Click to collapse
Yup, tested it and it works perfectly!! Thanks!
Sent from my SGH-I337M using xda premium
noskojv said:
It is just a good sound and good bass. :good:
There is an increase in the volume of the headphones , if you need I can give.
Installation CWM:
Click to expand...
Click to collapse
Thank you so much. That increased the volume, and also, I used this mod and enjoy it very much
I got strange behavior with it. It works initially then when I disconnect and reconnect my headphone, no eq effect. sometimes it kicks in automatically in a minute or so sometimes doesn't.
c_zal said:
I got strange behavior with it. It works initially then when I disconnect and reconnect my headphone, no eq effect. sometimes it kicks in automatically in a minute or so sometimes doesn't.
Click to expand...
Click to collapse
Settings / sound / music effects
Select BeatsEQ
Is it only me or this mod breaks stock player?
ama3654 said:
Is it only me or this mod breaks stock player?
Click to expand...
Click to collapse
+1 .. Wanam's ROM. The (Mod_headphones.zip) file in post 8 works fine though.
i installed this and stock music player isnt working. it had more bass compared to this dunno why i feel so. I didnt backup so is there a way to go back n get stock music player functionality.
Related
this is for the people who want to fix volume level. this work with any gingerbread base rom. its working good for me.
Is this the same thing as this? I'm wary of just installing some random file without much information.
zharptitza said:
Is this the same thing as this? I'm wary of just installing some random file without much information.
Click to expand...
Click to collapse
You shouldn't need this. If your sig is correct and you still have CM7 use the DSPManager app. It can boost volume for speaker and through headset. I set all my eq. settings to 6.1 and it is loud and not distorted at all.
Mustang302LX said:
You shouldn't need this. If your sig is correct and you still have CM7 use the DSPManager app. It can boost volume for speaker and through headset. I set all my eq. settings to 6.1 and it is loud and not distorted at all.
Click to expand...
Click to collapse
it works better then DSP. i am using it with out any problem..its just an app.
pbpatel1981 said:
it works better then DSP. i am using it with out any problem..its just an app.
Click to expand...
Click to collapse
I'm on CM7 and this works beautifully (I've only tried it for external speaker) on setting 6+. Loud as hell with no distortion!
Volume+ is definitely a trusted app from an awesome developer "Meltus". He's the same one that released the app "Louder volume hack" ages ago. I've used his volume apps since back on my MT3G .
His free app is here if you guys want to read up on it first.
Thank you. Works great on RCMix HD v5.9.7.
pbpatel1981 said:
it works better then DSP. i am using it with out any problem..its just an app.
Click to expand...
Click to collapse
explain please.
Sent from my Inspire 4G using XDA Premium App
Excellent app! It just works and works well IMHO
baseballkyle said:
Excellent app! It just works and works well IMHO
Click to expand...
Click to collapse
Ok I spoke a little too soon. This app doesn't play well with all kernels
baseballkyle said:
Ok I spoke a little too soon. This app doesn't play well with all kernels
Click to expand...
Click to collapse
What kernel are you using? I'm using this app with Lordmod 4.2 CFS -25mv undervolt, no problems reported here.
I personally notice distortion once I get to about +3 or +4 on my device. I keep it set to +2 and everything sounds great. It even seems to save the settings and re-apply on boot, great stuff!
The incall volume seems a bit low on Note2, Meltus provide a solution for SGS3
(http://forum.xda-developers.com/showthread.php?t=1722136)
and i made a version for Note 2.
Unzip the attached zip and copy :
default_gain.conf to system/etc to boost incall volume
Volume.db to system/etc to disable boot sound and camera sounds
Slightly less volume boost mod by eliasshadow:
http://forum.xda-developers.com/showpost.php?p=32538351&postcount=16
Happy to see you here doc!
Thanks for the mod!
Sent from my GT-N7100 using Tapatalk 2
Great!!!
Can you modified the volume overall like Meltus did in SGSiiii???
Here is the modified volume conf from Meltus:
http://forum.xda-developers.com/attachment.php?attachmentid=1371803&d=1349238558
Thanks!! (ill press thanks button when i have one tomorrow)
DocRambone said:
The incall volume seems a bit low on Note2, Meltus provide a solution for SGS3
(http://forum.xda-developers.com/showthread.php?t=1722136)
and i made a version for Note 2.
Unzip the attached zip and copy :
default_gain.conf to system/etc to boost incall volume
Volume.db till system/etc to disable boot sound and camera sounds
Click to expand...
Click to collapse
Will this disable camera auto-focus sound too? Or only camera shoots?
will it work on all firmwares?
Both of the files are working on Omega V3.
Thanks for the good work !!
anonymous572 said:
Will this disable camera auto-focus sound too? Or only camera shoots?
Click to expand...
Click to collapse
All camera related sounds will be disabled.
love this mod but it **** up the speaker
ppl cant hear u from the speaker,its a issuse with the dialer,cuz its picks up your voice on apps
Jesus christ... this actually makes the speaker louder too ... I thought this would only make the ear piece louder, not the entire phone.
Sent from my GT-N7100 using Tapatalk 2
will this work on a Rooted odex rom?
Sent from my GT-N7100 using xda premium
installed Default_gain.conf but it made my speakers to loud I didnt back file up
Can anyone upload origanal file please
Sent from my GT-N7100 using xda premium
Very good!
Much louder, thanks! Dayamnnn!
Great way to destroy your speaker fast...
Sent from my GT-N7100 using Tapatalk 2
Reb0rn said:
Great way to destroy your speaker fast...
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
No, its totally up to the user.
stesteste said:
installed Default_gain.conf but it made my speakers to loud I didnt back file up
Can anyone upload origanal file please
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
Here you go !! Both files are stock volumes.
:good::good::good:
And here volume boost BUT not so loud, for scared people...
The op volume boost is on 63 level and this one is on 60.Its not flashable zip, just replace the default_gain with a root explorer:
View attachment 60_sound_mod.zip
eliashadow said:
And here volume boost BUT not so loud, for scared people...
The op volume boost is on 63 level and this one is on 60.Its not flashable zip, just replace the default_gain with a root explorer:
View attachment 1385626
Click to expand...
Click to collapse
Well that was better. Thanks a lot bro!
Sent from my GT-N7100 using Tapatalk 2
its sooo gooo .. loving it ...
Hi OP
Loving your mod, my speakers are so loud now i am loving it ...
I have manually reduced all my volume types by 1 point .. and now its loud,clear and Great!!! :laugh:
Thanks a lot for your mod...
P.S. I have downloaded the less volume increase file as well just in case if on any later stage i need to bring down the volume..
Thanks again OP :good:
nevermind
can you mod screen brightness 100% on camera ?
Sent from my GT-N7100 using xda app-developers app
So I'm sharing my moded t03g audio file. Gives the speaker one hell of a boost!
Put it in etc/sound. Permissions rw-r--r--.
Speaker Boost
https://www.box.com/shared/crffdcvdwqo2dg9yaj5h
Speaker + Headset Boost
https://www.box.com/shared/lue9gcq3avnjhs9yr46a
Headset gets REAL loud! Made my Koss Porta Pro vibrate!
Thanks to imilka for directions and for cm10 on our devices.
Also. Try this mod with http://forum.xda-developers.com/showthread.php?p=31808489 for the most awesome result!
UPDATE: 2012-11-19
OK I got a new one that works for YouTube and games too based on newest cm10 build.
This should only be used on roms that have the wired headset microphone fix.
I will only make a version with both speaker and headphone volume increase. Here it is:
https://www.box.com/shared/nupknymebllvoifsct0e
I'm not sure it will work on all versions of cm.pa.aokp.aosp builds out there but try and see if it works for you.
UPDATE: 2012-12-16
So... I got some time to play around with latest CM10.1 for Note2. And I made the audio boost for it too
So here's the new t03g file for CM10.1:
http://db.tt/PLRq26l6
Enjoy!
You liked this? Press thanks and I'm happy!
Reb0rn said:
So I'm sharing my moded t03g audio file. Gives the speaker one hell of a boost!
Put it in etc/sound. Permissions rw-r--r--.
https://www.box.com/shared/crffdcvdwqo2dg9yaj5h
Thanks to imilka for directions and for cm10 on our devices.
You liked this? Press thanks and I'm happy!
Edit. Will try to boost earplug...
Click to expand...
Click to collapse
What value did you use?
I set 105 as I thought going higher might break your speaker... its more then enough.
Sent from my GT-N7100 using Tapatalk 2
Added headset boost. Its sick!!
Who needs volume + if its this easy to mod...
Sent from my GT-N7100 using Tapatalk 2
how to install?
edit: ohh sry, did not read...
Volume in music, phone and system sounds has increased, but when playing games or in Youtube watching clips the volume is still low .
gee2012 said:
Volume in music, phone and system sounds has increased, but when playing games or in Youtube watching clips the volume is still low .
Click to expand...
Click to collapse
Hmm.. that sucks. Wonder how to fix that...
Sent from my GT-N7100 using Tapatalk 2
Sound is gone.
Fired From My FireDevice.
U have to set right permissions. If you don't know how. Reboot to recovery. Advanced. And choose fix permissions.
Profit.
Sent from my GT-N7100 using Tapatalk 2
Hi again, i'm a afraid that the speaker gonna break... can I shouse the max volume someware?
Sent from my GT-N7100 using Tapatalk 2
2xmrc00l said:
Hi again, i'm a afraid that the speaker gonna break... can I shouse the max volume someware?
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
Check pic.
Sent from my GT-N7100 using Tapatalk 2
Reb0rn said:
U have to set right permissions. If you don't know how. Reboot to recovery. Advanced. And choose fix permissions.
Profit.
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
Already tried BT not working. Awesome beats FC.
Fired From My FireDevice.
BT is common cm10 error. Not from this mod.
Awesome beats reinstall.
Sent from my GT-N7100 using Tapatalk 2
Sound is gone....used ES File Explorer and rebooted in to recovery and fixed permissions..
I noted that in some downloads its called .bin in the end.
Delete that. It should only be named t03g
Sent from my GT-N7100 using Tapatalk 2
Its not working with jellybam. Confirmed...file is different...
Fired From My FireDevice.
Thanks for the tweak, I was just looking for something that would allow to up the speaker volumen, too low to wake up to the alarm in the morning...
Reb0rn said:
I noted that in some downloads its called .bin in the end.
Delete that. It should only be named t03g
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
nope was not the case for me
OK I got a new one that works for YouTube and games too based on newest cm10 build.
This should only be used on roms that have the wired headset microphone fix.
I will only make a version with both speaker and headphone volume increase. Here it is:
https://www.box.com/shared/nupknymebllvoifsct0e
I'm not sure it will work on all versions of cm.pa.aokp.aosp builds out there but try and see if it works for you.
Sent from my GT-N7100 using Tapatalk 2
Nice mod and works very well with PA.
I would recommend decreasing external speaker volume as its very risky and must be close to the limit as it is very distorted over 75% even with bass turned down .
Thanks.
:: Edit file 102 seems to work well no distortion on full volume only when bass ramped up
Sent from inside the lunatics pea brain
Does Acid Audio Engine work on cm10 alpha 4?
Sent from my GT-I9003 using xda app-developers app
Yes... Don't flash v7... Look for v5. Confirmed working.
Edit: You might wanna try Viper4Android audio found over @ Android Software Development. It's satisfying..:thumbup:
Sent from my Nexus 7 using xda app-developers app
why not v7.0
Sent from my GT-I9003
Ashish Lahare said:
why not v7.0
Sent from my GT-I9003
Click to expand...
Click to collapse
I've tried almost all sound mods in XDA . In v7, Acid seems to abandoned Noozxoide. So if you're a Noozxoide fan (audiophile), you're gonna be disappointed. In v5, you get to choose either Awesome or Noozxoide. Meaning, you still got an option to choose. My recommendation: Make a nandroid, delete all current sound mods, try Viper4Android.. High clarity and powerful bass... I installed it on all my devices after I tried it once. It's only a 300kb file with installation instructions in it. To me, the other BIG BRAND sound mods can't even come close...
http://forum.xda-developers.com/showthread.php?t=2191223
Sent from my GT-I9003 using xda app-developers app
Megabassbeats for jb v2 is way better than fancy acid sound mod.
As per my experiencing and long term testing I can say that all sound mods practically dont give any differen quality (we dont have dedicated sound chip). Our default system lib files are much capable to give high quality sound. If anybody want good quality sound then use high quality headphones with good music player having wide variety of effective equilizers with deep bass and treble effect. For me poweramp perform best job in music player category.
vishal24387 said:
As per my experiencing and long term testing I can say that all sound mods practically dont give any differen quality (we dont have dedicated sound chip). Our default system lib files are much capable to give high quality sound. If anybody want good quality sound then use high quality headphones with good music player having wide variety of effective equilizers with deep bass and treble effect. For me poweramp perform best job in music player category.
Click to expand...
Click to collapse
You should try before replying. Have you tried Viper4Android's Xhifi? If you an audiophile, you should really give it a go. It's only a 300kb zip file with installation instructions in it.
Edit: In fact, try it with stock earbuds/ common headphones...
chung1213 said:
Does Acid Audio Engine work on cm10 alpha 4?
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
v5AC!D works well, with Dolby add-on...
Lim Wee Huat said:
You should try before replying. Have you tried Viper4Android's Xhifi? If you an audiophile, you should really give it a go. It's only a 300kb zip file with installation instructions in it.
Edit: In fact, try it with stock earbuds/ common headphones...
Click to expand...
Click to collapse
ok bro...i will try it I read those instruction but its quite confusing. Can u explain me in simplified way?
vishal24387 said:
ok bro...i will try it I read those instruction but its quite confusing. Can u explain me in simplified way?
Click to expand...
Click to collapse
Go for Xhifi.. No probs to use the ICS file if on jellybean. The instructions are in the zip. Unzip and you need to change 2 system files to .bak and then replace it with their file found in the zip. It written by a Chinese fellow from China. Damn, he's a sound mod talent.
Edit: I used to a big Acid Audio fan too.. Even followed their FB page for news.
I've tried acid audio v5 and also viper4android... but I think acid audio is quite better... I mainly listen to music and I find better sound quality with acid audio...
Sent from my GT-I9003 using xda app-developers app
mathew1234 said:
I've tried acid audio v5 and also viper4android... but I think acid audio is quite better... I mainly listen to music and I find better sound quality with acid audio...
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Acid v5 was good but I found its bass a bit too hard when compared to Xhifi's while Xhifi can more even specific by using its Ho clarity and Lo contour tunings. Too bad, I'm not into FX..That's like really going into details just using device's speakers. Anyway, Best of all, it doesn't leave tons of files on your device.
Lim Wee Huat said:
Acid v5 was good but I found its bass a bit too hard when compared to Xhifi's while Xhifi can more even specific by using its Ho clarity and Lo contour tunings. Too bad, I'm not into FX..That's like really going into details just using device's speakers. Anyway, Best of all, it doesn't leave tons of files on your device.
Click to expand...
Click to collapse
I'm using XHiFi now.. The sound seems to be pretty good.. And like mentioned above just three files replaced and so simple no mess like the others..
Anyway I have always had the issue of audio skipping.. That is, there is random short pause which I find really annoying.. I've tried nearly all mods, except acid and none of them seem to solve a the issue..
It would be great if someone has a solution to that.. I'm on cm10 and poweramp. Audio buffer setting is max in poweramp..
ivAnash said:
I'm using XHiFi now.. The sound seems to be pretty good.. And like mentioned above just three files replaced and so simple no mess like the others..
Anyway I have always had the issue of audio skipping.. That is, there is random short pause which I find really annoying.. I've tried nearly all mods, except acid and none of them seem to solve a the issue..
It would be great if someone has a solution to that.. I'm on cm10 and poweramp. Audio buffer setting is max in poweramp..
Click to expand...
Click to collapse
Did you uninstall previous sound mods before installing V4A? I think it's best to refer back to the developer for solution..
Lim Wee Huat said:
Did you uninstall previous sound mods before installing V4A? I think it's best to refer back to the developer for solution..
Click to expand...
Click to collapse
Everytime I plan to apply a new music mod, I reflash the rom so there are no residues from the previous mod.. That is what I did with this..
ivAnash said:
I'm using XHiFi now.. The sound seems to be pretty good.. And like mentioned above just three files replaced and so simple no mess like the others..
Anyway I have always had the issue of audio skipping.. That is, there is random short pause which I find really annoying.. I've tried nearly all mods, except acid and none of them seem to solve a the issue..
It would be great if someone has a solution to that.. I'm on cm10 and poweramp. Audio buffer setting is max in poweramp..
Click to expand...
Click to collapse
****, me too. Gonna research on this and keep you updated.
Btw, I used awesome beats for a while on poweramp and realized it sucks pretty bad, a good poweramp config wins every time. That beats crap is just overhyped dr dre fanboy ultra treble/bass
How am I supposed to UNINSTALL the previous mods? The post also says to remove dsp manager I guess. I've installed the zip version V5.. I can see the 'acid audio technology enabled' notification but no percievable difference in sound and it's not that I'm not good at listening. Is there any possibility that it doesn't get installed properly even though I can see the acid audio app? And yes I'm on cm9 a14 and the nicsptl a11 kernel.
Sent from my GT-I9003 using Tapatalk 2
I thought the audio files could use some volume boost to better show off these sexy speakers
These are the default audio files which have been modded. This is NOT a system wide audio hack. For that check out Viper4Android.
This will overwrite files on /system/media/audio partition and should be flashed in recovery only.
Audio Bump to Full Dynamic Range (No crackling sound)
Dropbox - https://www.dropbox.com/s/u7iruechb4l6iiz/M8_Default_Sounds_Full_Dynamic_Range.zip
Audio Bump to 150%
Dropbox - https://www.dropbox.com/s/j36hma4xei7vdy2/M8_Default_Sounds_AudioBoost_150perc.zip
Audio Bump to 200%
Dropbox -https://www.dropbox.com/s/djwq6tjyf123mfy/M8_Default_Sounds_AudioBoost_200perc.zip
Revert back to Stock
Dropbox - https://www.dropbox.com/s/dqyeaxi54k5tbbk/M8_Default_Sounds_Revert.zip
Sweet downloading now
Dam that's loud nice one
Nice work, definitely delivers... sooner then expected, too.
Sent from my ViperOne M8 using xda app-developers app
I flashed and it said something about update binary. The sound effect changed for the touch sounds but I don't notice anything being louder.
DELETED!
hmmm...didn't change anything...
Psych0t1c20 said:
I flashed and it said something about update binary. The sound effect changed for the touch sounds but I don't notice anything being louder.
Click to expand...
Click to collapse
Crazypinoy9 said:
hmmm...didn't change anything...
Click to expand...
Click to collapse
Which recovery are you both using? This is tested and working fine with TWRP
Sent from my HTC One_M8 using XDA Premium 4 mobile app
v-b-n said:
Which recovery are you both using? This is tested and working fine with TWRP
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm on TWRP 2.7.0.2
v-b-n said:
Which recovery are you both using? This is tested and working fine with TWRP
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Philz
Flashed it with Philz but didn't really notice any noticeable boost in sound after. My music still sounded more or less like it did before the flash with the volume cranked up to the max.
It's not to make your speakers louder but it makes your audio files themselves louder as in stock ringtones, alarms, ui, etc.
Sent from my HTC One_M8 using xda app-developers app
shag04 said:
It's not to make your speakers louder but it makes your audio files themselves louder as in stock ringtones, alarms, ui, etc.
Sent from my HTC One_M8 using xda app-developers app
Click to expand...
Click to collapse
Thanks.
Would have been awesome if music files can get a little boost as well.
jwsm said:
Thanks.
Would have been awesome if music files can get a little boost as well.
Click to expand...
Click to collapse
I also flashed in TWRP but it didn't do anything for me.
Not sure why some are saying no difference ... revert to stock play any one tone at full volume, then flash the mod and play again ... if you dont feel the difference, then this mod is not necessary for you anyways
Added new edited set ...this one has been bumped to Full Dynamic Range without causing any sound crackling (on some tones with 150%) on the speakers.
Think of it like 120% volume bump but all sounds stay withing a decibel limit to prevent crackling.
I think its better than the 150%
v-b-n said:
Added new edited set ...this one has been bumped to Full Dynamic Range without causing any sound crackling (on some tones with 150%) on the speakers.
Think of it like 120% volume bump but all sounds stay withing a decibel limit to prevent crackling.
I think its better than the 150%
Click to expand...
Click to collapse
Downloading now
So, just to confirm, this only increases the audio output on UI, system notification and ring tones but will not boost the sound volume when playing music through the speakers, correct?
jwsm said:
Downloading now
So, just to confirm, this only increases the audio output on UI, system notification and ring tones but will not boost the sound volume when playing music through the speakers, correct?
Click to expand...
Click to collapse
Yes that's correct.. These are edited audio files nothing more
Sent from my HTC One_M8 using XDA Premium 4 mobile app
Flashed with CWM didn't change nothing said something about Binaries but flashed properly but no change in sounds with notifications
v-b-n said:
Added new edited set ...this one has been bumped to Full Dynamic Range without causing any sound crackling (on some tones with 150%) on the speakers.
Think of it like 120% volume bump but all sounds stay withing a decibel limit to prevent crackling.
I think its better than the 150%
Click to expand...
Click to collapse
Thanks mate! Flashed the 120%, not sure if I notice a difference, but I'll trust you!
:highfive:
Maedhros said:
Thanks mate! Flashed the 120%, not sure if I notice a difference, but I'll trust you!
:highfive:
Click to expand...
Click to collapse
Ha ha.. I didn't get time yesterday.. Will update op today with the waveform screenshots that will show what I have done to the sounds