Sense 4a roms - HTC Pico (Explorer)

hi.ı flashed sense 4a roms -all of them- and my NAND is always burning. ı want to use sense 4a roms.help please.

juristokrat said:
hi.ı flashed sense 4a roms -all of them- and my NAND is always burning. ı want to use sense 4a roms.help please.
Click to expand...
Click to collapse
Can't get you- "my nand is always burning " what ?
Sent.....just sent

DanceOff said:
Can't get you- "my nand is always burning " what ?
Sent.....just sent
Click to expand...
Click to collapse
I think he Means his nand always gets burnt every time he uses any sense4a Roms ~"My nand is always burning "
LâTêS†↭ⓛⓘⓝⓚⓢ™CM10 HTC A310E.
If I haven't given you link, it's above. Just click it

You will have to use a different KERNEL.
Most of all the available SENSE 4.0 ROMs, you will get an OC Kernel with them....
So what you need to do, is to get a non-OverClocked Kernel, and use it instead of your ROM kernel.
Best of all, the non-OC Kernel, cute_prince Kernel (Links below) is the best(Personal Choice)...
Link 1:
http://dl.dropbox.com/u/75378513/sen...ute_prince.zip
Link 2:
http://dl.dropbox.com/u/75378513/sense4_cute_prince.zip
People who get status 6 error plz download again. Sorry for inconvenience.
If you need help with installation, reply me...
"Courtesy to @rcane for download links"
Press THANKS if it helped!!:good:

Related

[KERNEL] Defy 2.2 kernels (flash with CWM )

It is not my work!!!
Most of them are made by bbs.mfunz.com , if it is not ethical , tell me and I will delete it. It you need another kernel , tell me and post the sbf file here , I will make it
China kernels : ( may break flash light , use with caution!! )
China 212 : http://www.mediafire.com/download.php?ux8jab7f98dub18
China 260 : http://www.mediafire.com/download.php?7xr7iu9qb44yr2a
China 211 usb fixed : http://www.mediafire.com/download.php?b5akja3pkab7k1p
China 1.11 : http://www.mediafire.com/download.php?qdkyw1a3i1a895b
Others :
3.4.3-36-1.7 : http://www.mediafire.com/download.php?snyxru3rj0b0dfv
3.4.3-33 : http://www.mediafire.com/download.php?b56a54vvq33vl6n
3.4.3-179-002 : http://www.mediafire.com/download.php?nyn5cgrqtrg5iqv
3.4.3-177 : http://www.mediafire.com/download.php?rk5e7kcazklm3dd
ps. Flash it via CWM , FULL WIPE or WIPE CACHE is recommand.
Consider putting up gb kernels too...
Sent from my MB526 using xda premium
nogoodusername said:
Consider putting up gb kernels too...
Sent from my MB526 using xda premium
Click to expand...
Click to collapse
I don't know if the new kernels work on old bootloader, I can't test it because it is my only phone. You can post the sbf file here and I will try to make it.
are these from my post on mfunz?
if it is, the zip froyo kernel is not complete. i only put boot.img into the zip without devtree, which means you can only flash between froyo kernels.
if you flash these zips from gb kernel, you won't be able to boot. please flash some fixed.sbf and you can boot again.
dlhxr said:
are these from my post on mfunz?
if it is, the zip froyo kernel is not complete. i only put boot.img into the zip without devtree, which means you can only flash between froyo kernels.
if you flash these zips from gb kernel, you won't be able to boot. please flash some fixed.sbf and you can boot again.
Click to expand...
Click to collapse
I don't know if it was done by you if yes, could you mind I post it here?? thanks for information.
Hi! i've searched informations about kernels but I still don't understand what are the differences between different kernels...will them improve battery healt or change performances or something else? i'm running stock froyo with stock kernel (2.3.32.9- .......), I need to change/upgrade it?
thanks!
kevin_diu said:
I don't know if it was done by you if yes, could you mind I post it here?? thanks for information.
Click to expand...
Click to collapse
of course you can put it here, but with some warnings just as i said.
http://bbs.mfunz.com/thread-157915-1-1.html
are these from the link above?
Hi! i've searched informations about kernels but I still don't understand what are the differences between different kernels...will them improve battery healt or change performances or something else? i'm running stock froyo with stock kernel (2.3.32.9- .......), I need to change/upgrade it?
thanks!
dlhxr said:
of course you can put it here, but with some warnings just as i said.
http://bbs.mfunz.com/thread-157915-1-1.html
are these from the link above?
Click to expand...
Click to collapse
Yes, maybe some of them are copy from your post. And all of those script are copy from your post. I am very sorry about that and hope you don't mind.
FraRiva91 said:
Hi! i've searched informations about kernels but I still don't understand what are the differences between different kernels...will them improve battery healt or change performances or something else? i'm running stock froyo with stock kernel (2.3.32.9- .......), I need to change/upgrade it?
thanks!
Click to expand...
Click to collapse
Different Defy have different hardware and if you flash a appropriate kernel, it improve battery health, but i don't know it can improve performances or something. If you are running stock froyo and kernel, I suggest u don't touch it.

[GUIDE] How to run more then 1 roms at same time? MAX=5

How to Dual Boot Multiple ROMs on Your Android Phone
Whether you want to test out a new ROM for daily use or just keep an eye on one that's being developed, you can run multiple ROMs on your rooted Android phone with BootManager, and pick which one to use when you start it up.
Having multiple ROMs to choose from is great, but flashing and re-flashing new ROMs just to try them out is annoying. If you want to try one out but don't want to fully flash it over your current ROM, BootManager will let you flash it (and up to three others) to your SD card, so you can try multiple ROMs at once. The ROMs you run from your SD card won't be quite as fast, and not every ROM out there will work, but it should give you a chance to try out most other ROMs without fully flashing them.
Right now the app is officially supported on the original Motorola Droid, Droid Incredible, HTC Thunderbolt, HTC Vision, HTC EVO 4G, HTC Inspire 4G, HTC Desire, and the HTC Desire HD. It may work on other phones, though, they just aren't officially supported yet.
Note: This tutorial contains some pretty advanced stuff, and we don't recommend it if you're unfamiliar with rooting and flashing ROMs. If you're just starting out, check out how to root your Android phone and how to flash Android ROMs before moving onto something like this.
Step One: Flash a Second ROM
Before you do anything, make a nandroid backup of your current ROM with ROM Manager or through your recovery module. If anything goes wrong, you can always restore from this backup to get things back to the way they were.
To set up BootManager, just download and install it from the Market, and start it up. You'll also want to grab a ROM of your choice and save the zip file on your SD card.
When you first start up BootManager, it'll prompt you to back up your boot.img, which you should do before installing any ROMs. Once you've done that, head to "Install ROMs". Pick the zip file from your SD card containing the ROM you want to flash, and check all three boxes: Wipe System, Wipe Data, and Wipe Cache. Let it do its thing (which will take awhile). When you're done, it will give you the option of booting into your new ROM. Hit Done; we aren't ready to boot into it just yet.
Step Two: Install Google Apps and Other ROM Add-Ons
Most ROMs don't come with Google's copyrighted apps, like Gmail, the Market, and others. This is a problem, since when you boot into your new ROM you need BootManager to function if you ever want to boot out of it, and it won't work unless you're signed into the Android Market. Luckily, there's an easy fix (note: if you know your ROM comes with Google Apps installed, you can skip this step).
Download the Google Apps zip file for the ROM you just installed and go back to BootManager. Hit Install ROMs. This time, pick Google Apps' zip file, and use the same slot that you used in step one. Leave all three "wipe" boxes unchecked this time. When it's done, booting into that slot will take you to the original ROM, but with the Google apps installed.
If you want to install a theme or other zip-based mod in the future, you can do that using this method too. Just remember: if you're flashing a new ROM, check all three "wipe" boxes, but if you're just installing an add-on to a ROM, don't check any of them.
Step Three: Switch Between ROMs
To boot into one of your other ROMs, just head into BootManager and choose "Boot Installed ROM". It'll show you a list of ROMs you have installed on your device, and after choosing one of them it will reboot into that ROM. BootManager will come installed on each of your other ROMs as well, and as long as you're signed into the Android Market on that ROM, you can boot into it from there as well and switch back to your main ROM.
That's it! You can flash up to five ROMs at a time, so you'll never be bored by one measly operating system. Hit the link to download BootManager.
BootManager is a $2.99 download for Android 2.1 and up. See the Market page below for officially supported devices.
https://market.android.com/details?id=com.drx2.bootmanager
© for lifehacker
http://lifehacker.com/5826050/how-to-dual-boot-multiple-roms-on-your-android-phone
Nice, although the actual app isn't very hard to figure out..
Hi,
Is it possible to boot ICS rom from SD card if the base ROM is stock GB?
ypsmav said:
Hi,
Is it possible to boot ICS rom from SD card if the base ROM is stock GB?
Click to expand...
Click to collapse
Not sure if this applies to the Sensation, but i was unable to do this on my HTC view between ICS and Gingerbread. Firmware needed to match
cmart4 said:
Not sure if this applies to the Sensation, but i was unable to do this on my HTC view between ICS and Gingerbread. Firmware needed to match
Click to expand...
Click to collapse
ypsmav said:
Hi,
Is it possible to boot ICS rom from SD card if the base ROM is stock GB?
Click to expand...
Click to collapse
with FW 3.12 it shoudl work but then use ICS 4.0.1 and sense 3.5
otherwise check here:
http://forum.xda-developers.com/showthread.php?p=21711154#post21711154
cmart4 said:
Not sure if this applies to the Sensation, but i was unable to do this on my HTC view between ICS and Gingerbread. Firmware needed to match
Click to expand...
Click to collapse
Yes, this is also true for us Sensation users
Sent from my HTC Sensation Z710e using XDA App
Actually I have been using this app for a long time and I am running trips ics rite now with cm7 as my base nd it works perfect although I do have 3.24 firmware
Edit: btw aosp or cm roms work the best with this app if you try out a sense rom it will lag no matter what and also the limit of rooms is not 5 go to setting nd u can change how many rom slots u want
Sent from my HTC Pyramid using Tapatalk
deol 4ever said:
Actually I have been using this app for a long time and I am running trips ics rite now with cm7 as my base nd it works perfect although I do have 3.24 firmware
Edit: btw aosp or cm roms work the best with this app if you try out a sense rom it will lag no matter what and also the limit of rooms is not 5 go to setting nd u can change how many rom slots u want
Sent from my HTC Pyramid using Tapatalk
Click to expand...
Click to collapse
thnx but here it was 5 and idd at sense it doesnt work at all... i finish install then i cant boot into it maybe u can help me out xD
Alienator9191 said:
thnx but here it was 5 and idd at sense it doesnt work at all... i finish install then i cant boot into it maybe u can help me out xD
Click to expand...
Click to collapse
Alright so did u make sure u checked all the boxes when u were installing the rom? Nd tell me the steps of how u installed the rom
Sent from my HTC Pyramid using Tapatalk
I'm going to try this on my TouchPad. The only thing keeping me from running an ICS ROM as my daily driver is the lack of HW video decoder support (aka YouTube HD and Netflix don't work).
Hopefully I can keep the latest CM 7.1 Kang and CM 9 Kangs side-by-side.
maxawesome said:
I'm going to try this on my TouchPad. The only thing keeping me from running an ICS ROM as my daily driver is the lack of HW video decoder support (aka YouTube HD and Netflix don't work).
Hopefully I can keep the latest CM 7.1 Kang and CM 9 Kangs side-by-side.
Click to expand...
Click to collapse
Touchpad CM9 alpha 2 already includes hardware video decoding support. Check that out!
einmus said:
Touchpad CM9 alpha 2 already includes hardware video decoding support. Check that out!
Click to expand...
Click to collapse
This is what happens when I don't check that forum for like a day. Thanked!
Lol im the poster of the guide and still need some help with it
i try to install several roms boot each time the boot.img cant be made... i have 3gb free for a rom so wtf
I wanted to buy this yesterday... but i have not credit card...
i would really LOVE to use this and i think it is the only i would pay for but i cant ((
is there any way to buy it without credit card? paypal?
JonnyZaggi said:
I wanted to buy this yesterday... but i have not credit card...
i would really LOVE to use this and i think it is the only i would pay for but i cant ((
is there any way to buy it without credit card? paypal?
Click to expand...
Click to collapse
Dl it illegal...
Sent from my HTC Sensation XE with Beats Audio using xda premium
Alienator9191 said:
Dl it illegal...
Sent from my HTC Sensation XE with Beats Audio using xda premium
Click to expand...
Click to collapse
No, dont dl it illegally..
Go on their website and purchase a key via paypal!
This doesn't work for me. Trying to install Sense 4.0 rom and it gives me error License CHeck Failed
deol 4ever said:
Alright so did u make sure u checked all the boxes when u were installing the rom? Nd tell me the steps of how u installed the rom
Sent from my HTC Pyramid using Tapatalk
Click to expand...
Click to collapse
just install zip tryed rcmix arhd virtuous S4X quatro and hypernonse
tryed on hyper:
install zip
arhd 6.3.0
checked all boxes
ext2(for sure)
boot img could not be created
on arhd the other way around
virtuous s4x
install zip
hypernonsense 0.6
check all boxes(removed the rom1 map then rebooted and then installed on rom1 to make sure arhd was removed for sure)
selected agin rom 1
failed to make boot img
rcmix the same
and insert coin i tryed it like on virtuous s4x with arhd rcmix and s4x
shawayne21 said:
No, dont dl it illegally..
Go on their website and purchase a key via paypal!
Click to expand...
Click to collapse
i know i did but he just has to donate another way and dl it illigal if he wants it idk how else he could get it...
I have the same issues with boot img, unfortunately didn't manage to solve it :/
Sent from my HTC Sensation Z710e using XDA App

[Guide][FAQ][UPDATED] Don't know about something? check this out first

To make Pico general section free of multiple reptitive questions i decided to make a FAQ thread
1). Can i root my phone?
Yes you can if you unlocked your bootloader
refer to this tutorial for reference
2a). What can i benefit from rooting my device?
For basic users, Root gives us a privilege to use apps that require root like titanium backup, rootexplorer and the likes. Root can also give you the ability to use CWM recovery and install custom roms
2b). Is there a downside to rooting?
yes, for one you may loose your warranty for unlocking your bootloader. you may also have a very slim chance (like 1%) in bricking your phone if you dont know what you are doing
3). What is ROM?
It's like Windows in android.without a rom your phone is good as brick.
4.). What is CWM and Custom ROM?
A custom rom is a modified form of the rom that was given to us by htc. a few examples of this are CM roms, AOKP roms,PA roms,PAC-roms, Sense-Based CWM is short for clockworkmod recovery it's a tool use to install custom roms, patches.
5). What is this CM/AOKP/PA/PAC/SENSE your talking about?
CM is short for CyanogenMod, CM gives its user vanilla android experience (which is only present in nexus devices) at the same time more options and customization available there are 4 versions so far CM6(not available for explorer)(froyo 2.2.x),CM7(Gingerbread 2.3.x),CM9(Ice Cream Sandwich 4.0.x)and CM10(Jellybean 4.1- 4.2)
AOKP is short for Android Open Kang Project, AOKP brings user MORE goodies than CM gives and it also gives the user Vanilla android experience.
PA is Short for Paranoid Android, Also like CM but it gives you unique Tablet UI (phone will look like a tablet) for your device even though it's just a phone.
PAC is combined PA, AOKP, CM. It gives the combined features of the 3
Lastly, Sense based rom are roms that are based from stock rom (with htc ui) or some are ported from other device
6). How to install one of this rom
Look for the rom that you think you like in android development section and follow the instruction given by the developer
7). So which of them is the best?
Try them all and don't compare roms people have their own preferences. when you compare roms some devs may feel bad and leave this device for good.
part 2:
1). My Device has very little amount of memory space available,how to increase memory?
there are various scripts in the forum to increase internal memory i'll give you some
this one or this one
2). Is overclocking the device possible?
for CM7/9 there is a kernel that support overclocking but i dont think its possible yet for CM10
3). Is Offline Charging for custom roms possible? (charging on plug while phone is off)
for now i haven't seen a rom or kernel that supports it (not sure about stock rom)
4). What is S-off
S-OFF means that the NAND portion of the device is unlocked and can be written to. In other words more options will be available once s-off is attained
5). So is S-Off Possible for HTC explorer?
As of now not yet but some people are trying to work on it
6). so what is a kernel anyway?
it's the medium through which the hardware part of the phone "talks" to the software side of the phone basically,like a translator of some sort. without the kernel a rom would never run
7). where can i get those kernels?
it's built in inside the rom you downloaded but you can try other kernels which other devs made by flashing them through the recovery
8). are all kernels compatible to my rom??
the answer is no, because some kernel were made for ics and not for gb, same goes for Jb kernel to Gb or Jb kernel to ICS so basically they are not interchangeable but there maybe kernels that can be compatible to both ICS/Jb because both versions were a little similar
9). so what's the best kernel??
again, the answer is dont compare them, but it's better not to touch the kernel because the developer of the rom has made the kernel in harmony with the rom. changing kernel may cause the rom to give unusual errors or problems
PS: If i made a mistake in the thread please feel free to tell me
I'll update the the thread whenever there's a new questions
Suggestions are accepted
Typing Mistake
Post #2 Point 5. It has been mistyped Possoble
In post2 point1 both the scripts are int2ext+ cm 10
Sent from my HTC Explorer A310e using xda premium
it was just an example i posted those 2 since they were the first one i saw when i was typing
Ohh....i see now
Thanks for this thread btw
Sent from my HTC Explorer A310e using xda premium
There was never a true overclock for Explorer.
xpmode said:
There was never a true overclock for Explorer.
Click to expand...
Click to collapse
well if i'm not mistaken cranium kernel did have overclock
nice thread +1
suggestion : you can add a bit info about kernels
vimjam said:
nice thread +1
suggestion : you can add a bit info about kernels
Click to expand...
Click to collapse
Seconded..
vimjam said:
nice thread +1
suggestion : you can add a bit info about kernels
Click to expand...
Click to collapse
will do that
UPDATE
new information has been added
anything goes bad after overclocking kernel?
---------- Post added at 08:21 PM ---------- Previous post was at 08:09 PM ----------
what is the maximum safe value for overclocking kernel?:
overclocking can fry your phone so its not recommeneded to be used
Sent from my Nexus 7 using XDA Premium HD app
Root
Is it Working???
vimjam said:
nice thread +1
suggestion : you can add a bit info about kernels
Click to expand...
Click to collapse
play store missing..!!
ngoralph said:
PS: If i made a mistake in the thread please feel free to tell me
I'll update the the thread whenever there's a new questions
Suggestions are accepted
Click to expand...
Click to collapse
Please suggest a way to install play store again... i installed and tried some custom roms... and made a backup of the stock rom using cwm recovery... but when i restored the stock rom...the playstore is missing.. please help..
Next can somebody PLEASE write out a thread outlining the benefits of an appropriate topic, or maybe a "A dummy's guide to composing a topic" maybe or "Do's and Dont's of topic composing".
Searching the forum can only prove to be beneficial IF the freaking threads have a TOPIC which gives an idea of the content!
Oh btw, this had nothing to do with either the OP or any post here just a general observation and the main reason of my cussing constantly while browsing these forums.
EDIT: I wanted to post it here: http://forum.xda-developers.com/showthread.php?t=1970184 but sadly that topic is closed and this seemed like the next best place.
shubhambhutani1 said:
Please suggest a way to install play store again... i installed and tried some custom roms... and made a backup of the stock rom using cwm recovery... but when i restored the stock rom...the playstore is missing.. please help..
Click to expand...
Click to collapse
put phonesky.apk to system/app via root explorer
phonesky.apk can be downloaded in Themes/apps section check my index for easy find
Fas1h said:
Next can somebody PLEASE write out a thread outlining the benefits of an appropriate topic, or maybe a "A dummy's guide to composing a topic" maybe or "Do's and Dont's of topic composing".
Searching the forum can only prove to be beneficial IF the freaking threads have a TOPIC which gives an idea of the content!
Oh btw, this had nothing to do with either the OP or any post here just a general observation and the main reason of my cussing constantly while browsing these forums.
EDIT: I wanted to post it here: http://forum.xda-developers.com/showthread.php?t=1970184 but sadly that topic is closed and this seemed like the next best place.
Click to expand...
Click to collapse
will start doing this thanks for the suggestion

Overclock to 1.2ghz and underclock to stock 1.0 ghz .zip file

Install zip from SD card !!
Reboot to recovery .
credited to Ravikirancg . Just share !!
shennwuu said:
Install zip from SD card !!
Reboot to recovery .
credited to china users . Just share !!
Click to expand...
Click to collapse
Is this good for 1ghz a2 or 1.2ghz a2 :silly:
Hi,
Small question, does the file "mmcblk1p12" contain the Clock Speed info?? Does this file vary from device to device?
Small request, Can you also modify the script to keep a backup of the old file in case something goes wrong we can restore the old one?
--
Regards,
Karthik
Its for jb leak for those who's atrix were at 1.2 GHz on ivs
sent from my atrix running avatar and cm10.1 kexec roms
so is it good for AT&T JB roms ?
This script is for official JB rom ( AT&T doubt it ) ,for device which is on stock 1.0ghz
shennwuu said:
Install zip from SD card !!
Reboot to recovery .
credited to china users . Just share !!
Click to expand...
Click to collapse
SERIOUSLY?! CREDITED TO CHINA USERS? I posted the 8 days before this here. http://forum.xda-developers.com/showthread.php?p=40756835
You just take my idea, make a flashable zip and give credit to someone else. The devtree of the JB leak has some thing called 'limit_1ghz' the kernel checks if this is present and if it is, it will limit it. The ics devtree does not have this. So the kernel does not limit it. Instead it uses a macro to figure out if a particular cpu is capable of running at 1.2 GHz max. I don't really bother about these.. Nor do I say this.. But give credit where its due.
Sent from my MB865 using Tapatalk 2
Sorry senior , I am not stealing your idea . I am just shared the file from China website .
I gave the credit to that fellow just not to make this belong to me . Sorry for everything ,I just wanna share the good things to all A2 users .
shennwuu said:
Sorry senior , I am not stealing your idea . I am just shared the file from China website .
I gave the credit to that fellow just not to make this belong to me . Sorry for everything ,I just wanna share the good things to all A2 users .
Click to expand...
Click to collapse
So, how about updating the op with the proper credits?
Brought to you by time and relative dimensions in space.
1BadWolf said:
So, how about updating the op with the proper credits?
Brought to you by time and relative dimensions in space.
Click to expand...
Click to collapse
Ya I'll say.... Credit is due to Ravi
MB865/ATT-ST/BMM & LG55c
1. Stock 4.0.4
2. Miui 4.0.4
3. PACman 4.2.2(6/22) nonkexec
4. Mt
5. MT
6. MOKEE 4.2.2(7/1) jbx. 7a 1553oc
Boy don't I hate being MOTOFRIED!!
Can I get a wohooo for the A2
shennwuu said:
Sorry senior , I am not stealing your idea . I am just shared the file from China website .
I gave the credit to that fellow just not to make this belong to me . Sorry for everything ,I just wanna share the good things to all A2 users .
Click to expand...
Click to collapse
that's okay buddy.. I too wanna just want to bring the best things this device..
karthiks.840 said:
Hi,
Small question, does the file "mmcblk1p12" contain the Clock Speed info?? Does this file vary from device to device?
Small request, Can you also modify the script to keep a backup of the old file in case something goes wrong we can restore the old one?
--
Regards,
Karthik
Click to expand...
Click to collapse
looks like this question went unanswered.. well mmcblk1p12 does not contain any clock speed info.. all the clock speed related things are in the kernel.. as for backup, dont bother about it. its the same as the device_tree.bin you find in your fastboot files. this partition is the device tree. for the curious,
as for how or what exactly happens is that, well,
there are two types of omap4430. with max speed of 1GHz (used in our phones) and 1.2GHz (in razr). these are experimentally found.. the kernel is smart enough to find out what its highest speed should be.. how ever, it also checks if "limit_1_0_ghz" is present in the devtree. if it is present, it will limit it to 1GHz even if it can run at higher speeds..
so in short
'limit_1_0_ghz' is present in device tree of jb fxz files and not present in ics. probably they missed it out in ics.
A little help please
Simple question
>I'm using an Atrix 2 (MB865 AT&T)
>stock 1.0 ghz
>Using ICS Supercharged rom
I haven't done anything to the kernal , do i have to flash a kernal to overclock ? and if yes what would be the best and the most stable kernal ?
>And i used "Atrix 2 bootstrapper" to flash the rom and it's still there , but now in most of the roms they say flash using BMM and if u used Atrix2bootstrapper before there is a good chance of getting the device into bootloop , so would it happen even if i uninstall bootstraper and instal BMM ?
Thanks in advance
Devinda said:
Simple question
>I'm using an Atrix 2 (MB865 AT&T)
>stock 1.0 ghz
>Using ICS Supercharged rom
I haven't done anything to the kernal , do i have to flash a kernal to overclock ? and if yes what would be the best and the most stable kernal ?
>And i used "Atrix 2 bootstrapper" to flash the rom and it's still there , but now in most of the roms they say flash using BMM and if u used Atrix2bootstrapper before there is a good chance of getting the device into bootloop , so would it happen even if i uninstall bootstraper and instal BMM ?
Thanks in advance
Click to expand...
Click to collapse
I had the Nitro Atrix2bootstrapper installed on my A2. I uninstalled it, and installed BMM 0.3.4... no problems. Boots up into boot menu manager no problems. But that might have just been sheer luck??? I followed the guide on here from Revi (i believe it was) to install BMM. I haven't flashed any roms though, haven't found one i think is worth flashing. They all seem to have some "missing" functionality (camera, wifi, bluetooth, etc..) Rooting my device was purely from a "tinkering & learning" aspect.
If i'm not mistaken though, if it does end up in a bootloop, you can use an FXZ firmware to set everything back. Just have to get into the fastboot menu and use rsd lite to flash the FXZ to the A2.
Experts, please correct me if I'm wrong. I've only been at this for 3 days
themiracleman said:
I had the Nitro Atrix2bootstrapper installed on my A2. I uninstalled it, and installed BMM 0.3.4... no problems. Boots up into boot menu manager no problems. But that might have just been sheer luck??? I followed the guide on here from Revi (i believe it was) to install BMM. I haven't flashed any roms though, haven't found one i think is worth flashing. They all seem to have some "missing" functionality (camera, wifi, bluetooth, etc..) Rooting my device was purely from a "tinkering & learning" aspect.
If i'm not mistaken though, if it does end up in a bootloop, you can use an FXZ firmware to set everything back. Just have to get into the fastboot menu and use rsd lite to flash the FXZ to the A2.
Experts, please correct me if I'm wrong. I've only been at this for 3 days
Click to expand...
Click to collapse
Thanks man , i flashed Jellybeer (JB.4.2) and successfully flashed back to ICS supercharged rom cause there were bugs in the JB rom + the battery life was awful , Using BMM and soft bricked phone once but still was able to flash ICS supercharged rom and now it's working just fine .
Want to flash the JBX kernel but not gonna do cause JBX kernel seems to drain more power . I'm using ICS spercharged v7 rom with stock kernal (1Ghz ) and get normal usage around 1 day if i use data and it can stay about 1.5 days if i just use calling and texting .
Try ICS supercharged v7 rom , no bugs what so ever !

[Q] HTC Sensation. Sense 5. Viper S 5.1.0 ROM.. can i install Kitkat 4.4 & how?

Thanks ive just bought a 2nd hand HTC Sensation running Jelly Bean 4.1.2 on a Viper S 5.1.0 rom.. its my 1st Android, and my 1st smartph, i know a little about techy stuff but definately no expert, so im not quite sure of the difference between Firmware and Rom (or are they the same?) i saw a link for Pacman something something, was a firmware packer for Kitkat, but is that a ROM? (i quite like the tweaks with Team Venom) so im pretty sure thats not the way to go.. id like to keep all the venom but have the chocolatey goodness of Kitkat.. if anyone could give me some feedback and tips or yes/no that would be awesome.. Thanks.. and props to Team Venom for making such an awesome Rom.. Cheers
Desty101 said:
Thanks ive just bought a 2nd hand HTC Sensation running Jelly Bean 4.1.2 on a Viper S 5.1.0 rom.. its my 1st Android, and my 1st smartph, i know a little about techy stuff but definately no expert, so im not quite sure of the difference between Firmware and Rom (or are they the same?) i saw a link for Pacman something something, was a firmware packer for Kitkat, but is that a ROM? (i quite like the tweaks with Team Venom) so im pretty sure thats not the way to go.. id like to keep all the venom but have the chocolatey goodness of Kitkat.. if anyone could give me some feedback and tips or yes/no that would be awesome.. Thanks.. and props to Team Venom for making such an awesome Rom.. Cheers
Click to expand...
Click to collapse
make a nandroid from recovery just in case(i suggest to use 4ext recovery)
format all partitions except sdcard from 4ext
enable smartflash from 4ext(only if the is on S-ON)
flash the rom
done
Hi
Sensation Android Development is only for ROM, if u want to know something about a ROm, You can ask on ROM topic. You Will talk with mates that have already install the ROM. So they can help you if you want. Dont be afraid, ask on topic ROM you will get more answer
blogodoblogodo said:
Hi
Sensation Android Development is only for ROM, if u want to know something about a ROm, You can ask on ROM topic. You Will talk with mates that have already install the ROM. So they can help you if you want. Dont be afraid, ask on topic ROM you will get more answer
Click to expand...
Click to collapse
what rom topic!? , when he can't post on Android Development because he is under 10 post, and first read what he ask.... he is asking about rom changing...
Hoooo i always forget this, ... Sorry
@rzr86 : thanks a lot
Download and flash a couple of kit Kat roms. They all nearly the same in my opinion. I prefer sense 4+ to be honest. Don't ask which Rom is best because your thread will be closed ( just advise)
Sent from my HTC Sensation Z710e using xda app-developers app
---------- Post added at 07:01 AM ---------- Previous post was at 06:41 AM ----------
If you've got sense 5 you won't need to change the firmware. Do you know how to get into recovery mode if so after you download a kk Rom go to recovery and press backup. This will back up your sense 5 Rom incase you want to go back to it. When it's complete go back and press wipe all except sd card. Then go back and press choose zip and then find your download file. The kk zip file you downloaded should be there. Press install and wait. Once installed you have to go back and do the same with gapps file which you should have downloaded with your Rom. Once complete go back and reboot your phone then wait few minutes and your kk Rom will be ready to set up and use.
Sent from my HTC Sensation Z710e using xda app-developers app
I believe he is asking whether there is a KitKat ROM with Sense. I don't know of any, but if someone knows a few, then they can make a suggestion.
Best rom
I'd recommend SultanXDA CM11, I think it is most stable and best battery life, almost no bugs.
Desty101 said:
Thanks ive just bought a 2nd hand HTC Sensation running Jelly Bean 4.1.2 on a Viper S 5.1.0 rom.. its my 1st Android, and my 1st smartph, i know a little about techy stuff but definately no expert, so im not quite sure of the difference between Firmware and Rom (or are they the same?) i saw a link for Pacman something something, was a firmware packer for Kitkat, but is that a ROM? (i quite like the tweaks with Team Venom) so im pretty sure thats not the way to go.. id like to keep all the venom but have the chocolatey goodness of Kitkat.. if anyone could give me some feedback and tips or yes/no that would be awesome.. Thanks.. and props to Team Venom for making such an awesome Rom.. Cheers
Click to expand...
Click to collapse
First of all you need kernel who can support 4.2.2 version and SebastianFM work on it, as i know

Categories

Resources