My stock AT&T HTC One X has developed a very annoying issue after the OTA update to JB.
Location services in the HTC weather widget constantly displays either "Current location" or else displays a city name that is within 10-20 miles of my actual location. Refreshing the widget either does nothing, or occasionally says "Unable to connect to location service..." Google Maps and Navigation nail my location exactly without any issues whatsoever, so I highly doubt I suddenly developed a hardware issue. Before the JB update, everything was working normally. And again, I'm running 100% stock unrooted One X.
I've done extensive searching, and have tried every bit of advice I could find: uncheck automatic time zone, uncheck fast boot, delete and reinstall the weather widget, clear Google framework cache, etc, etc, etc. In an act of desperation, I downloaded the official RUU last night and reflashed. After setting up my phone, I have the exact same problem.
To add insult to injury, my friend was here with his identical stock AT&T One X with the OTA JB update. Sitting right next to me, his phone displays the correct city and weather data.
Any other ideas?
I am desensed but it doesn't look to me like you went to apps, all apps, weather widget, clear data.
If you tried that already or that doesn't do it, I'd have no other ideas.
I forgot to add.. Can you not specify your location etc. within the widget settings? You must be able to, I hate depending on Geolocation for weather settings. It wastes battery by checking GPS every so often to see if you're still in the same location. I guess if you travel a lot this is useful...
In the weather app, go to Settings, and see if the option "My current location, Update my location in real time" is checked or not. Try it either way (mine seems to work right, whether its checked or not).
Also, try simply restarting the phone. I've had the Weather location be incorrect after flashing a new ROM, and restarting the phone fixed it.
The Weather widget reads the location info from the cell tower, not GPS. So the reading of the location is not related to Google Maps or Navigation.
redpoint73 said:
In the weather app, go to Settings, and see if the option "My current location, Update my location in real time" is checked or not. Try it either way (mine seems to work right, whether its checked or not).
Also, try simply restarting the phone. I've had the Weather location be incorrect after flashing a new ROM, and restarting the phone fixed it.
The Weather widget reads the location info from the cell tower, not GPS. So the reading of the location is not related to Google Maps or Navigation.
Click to expand...
Click to collapse
Yes, I have checked and unchecked everything, and have restarted dozens of times before and after reflashing, and after trying different ideas. As to exad's suggestion: yes, I can specify a location, but I travel more or less constantly within the state as well as frequent trips.
Problem solved!
Turns out it wasn't a software issue after all.
In a final act of desperation, I did a warranty exchange at the local AT&T warranty center. By the time I got almost home with my new (refurb) phone, I realized the location services still weren't working properly as I drove through 4 different cities in the metro area, and my location stayed the same.
So... I had a flash of inspiration, detoured to my neighborhood AT&T store, asked them to change out my SIM card, and that fixed the problem!
jlmwrite said:
Turns out it wasn't a software issue after all.
In a final act of desperation, I did a warranty exchange at the local AT&T warranty center. By the time I got almost home with my new (refurb) phone, I realized the location services still weren't working properly as I drove through 4 different cities in the metro area, and my location stayed the same.
So... I had a flash of inspiration, detoured to my neighborhood AT&T store, asked them to change out my SIM card, and that fixed the problem!
Click to expand...
Click to collapse
Thank you so much for posting your solution! This will be helpful to a few people I'm sure.
Related
I just got my brand NEW Asus TF 16GB from Amazon. I did the update first.
Then I noticed that it displays the wrong location in the weather widget.
I have GPS, Wifi and Google location tracking enabled.
Anyone else got the wrong location with this Tablet? Any way to get it work properly? I have not tried a different location either.
oh and google map app shows the correct location so I guess it knows where it is. Strange...
I know I can set it manually but I would like to know if it can be fixed to work in auto mode.
Any how this is a great site full of TF information.
Thanks in advance...
VeeKay
yeah, I hope there is a fix for this.
Mine also pinpoints me fine on the map.
But, weather widget says i'm in a small community, two cities away.
And a search to enter location manually, finds my city no problem.
Of course I prefer to leave it on AUTO.
Tap the weather widget and you can set your location manually, or force it to refresh.
I manually set mine to my location, then turned it back to automatic and it's been fine since.
Thanks for the tip
I tried that but unfortunately it didn't work. It goes back to the wrong location
I all of a sudden started having this issue. When i'm at home it says that i'm in a city that's more than 40 miles away which I've never even traveled near with my TF.
I've tried deleting the widget, checking google maps, and still it puts me in the wrong location.
This started happening less than a week ago.
Mine has said "Asahi ku" since I got it... I have no idea where that is.
Does anyone have an alternate GPS program installed like Locus?
I uninstalled that and it looks to be working fine now.
iboj007 said:
Does anyone have an alternate GPS program installed like Locus?
I uninstalled that and it looks to be working fine now.
Click to expand...
Click to collapse
Ok I spoke prematurely.
If I go into Google maps, it places me in the right location but for some reason, starts out in the location 40 miles away.
The Asus widget seems to be broken.
Well, I've been using my Sensation for about a week now and so far everything is fine, EXCEPT one major bug i found:
Every time I turn in the GPS-Option, I get a completely wrong location (ie in weather, maps, places, etc) and have to wait and refresh a short time later to get my actual real position and even short time later, the signal goes back to the wrong place.
example:
I enable GPS and refresh the weather, it goes to "Fürth" (some city in Bavaria, South Germany), but I'm actually located near Berlin (on the complete opposing end of Germany). Same goes for any other location based function.
I even disabled the "allow false locations" option, but don't know further, anyone experienced similar problems?
satani said:
Well, I've been using my Sensation for about a week now and so far everything is fine, EXCEPT one major bug i found:
Every time I turn in the GPS-Option, I get a completely wrong location (ie in weather, maps, places, etc) and have to wait and refresh a short time later to get my actual real position and even short time later, the signal goes back to the wrong place.
example:
I enable GPS and refresh the weather, it goes to "Fürth" (some city in Bavaria, South Germany), but I'm actually located near Berlin (on the complete opposing end of Germany). Same goes for any other location based function.
I even disabled the "allow false locations" option, but don't know further, anyone experienced similar problems?
Click to expand...
Click to collapse
I haven't seen this. I'll take a wild guess. Part of the A-GPS system can use cell towers and wifi to get a rough estimate of your location in order to speed up the GPS sat acquisition and lock. Perhaps the cell tower/wifi mapping in some parts of Germany is incorrect, so when it's using the local networks to find you it's flipping to another part of the country, the GPS kicks in and it locates you accurately. You could try a couple of things to test this. Turn off GPS and open Google Maps. It will normally locate you on the map within a few blocks of where you are and show a large blue circle due to the inaccuracy. Does it show you near where you are or in the other part of Germany? If it's way off then the local network mapping database is messed up. Not sure who to contact about that, but I guess you would start with your service provider.
As I recall Google has had a bunch of problems with the German authorities regarding the mapping they have done of wifi networks. Maybe that's a factor here, but who knows.
If this is the problem you could turn off the local network feature in Settings > Location. Problem is it will rely only on GPS then and take longer to get your location. But if my theory is right, right now the local network locator is hurting more than helping you.
If that's not the problem then install this app:
http://www.appbrain.com/app/gps-test/com.chartcross.gpstest
Turn off GPS, run the app, press the Menu button on the phone then Settings. At the top press "Clear AGPS" then "Update AGPS". Exit the app, turn on GPS and see if that helps. The initial lock after updating AGPS may take longer than normal, but that's expected. After that it will be back to normal.
samnada said:
I haven't seen this. I'll take a wild guess. Part of the A-GPS system can use cell towers and wifi to get a rough estimate of your location in order to speed up the GPS sat acquisition and lock. Perhaps the cell tower/wifi mapping in some parts of Germany is incorrect, so when it's using the local networks to find you it's flipping to another part of the country, the GPS kicks in and it locates you accurately. You could try a couple of things to test this. Turn off GPS and open Google Maps. It will normally locate you on the map within a few blocks of where you are and show a large blue circle due to the inaccuracy. Does it show you near where you are or in the other part of Germany? If it's way off then the local network mapping database is messed up. Not sure who to contact about that, but I guess you would start with your service provider.
As I recall Google has had a bunch of problems with the German authorities regarding the mapping they have done of wifi networks. Maybe that's a factor here, but who knows.
If this is the problem you could turn off the local network feature in Settings > Location. Problem is it will rely only on GPS then and take longer to get your location. But if my theory is right, right now the local network locator is hurting more than helping you.
If that's not the problem then install this app:
http://www.appbrain.com/app/gps-test/com.chartcross.gpstest
Turn off GPS, run the app, press the Menu button on the phone then Settings. At the top press "Clear AGPS" then "Update AGPS". Exit the app, turn on GPS and see if that helps. The initial lock after updating AGPS may take longer than normal, but that's expected. After that it will be back to normal.
Click to expand...
Click to collapse
I have the exact same problem as the op. soon as I open google maps it shows me 10 miles away from my house. always the same spot 10 miles away. a few seconds later when it gets a lock on my location it pops me back to where I actually am. If I close google maps and open it again it jumps back to the wrong spot again, waits a few seconds and then jumps back to my true location at home.
I tried what you mentioned above but it did not help. wifi on or wifi off same difference. I read about some people saying it shows their old address and I did recently move and the wrong location it shows is about 1.5 miles from my old house. also the wrong location it shows me in is on the edge of this private reservoir that I have never been too.
Anyone else have this problem or read on how to fix it?
OK, this is really bugging me.
(and yes, I know that there are similar topics elsewhere but none of them actually seem to help me resolve the problem)
Until recently, my weather application would automatically and correctly identify and show my nearest TOWN as the "current location". This also appeared on the homescreen.
Now, for some reason, it's persistently only giving me the COUNTRY as current location, i.e. United Kingdom in my case.
The only thing I've changed recently was to remove one or two of the cities that I wasn't interested in from the list, and added a couple of other ones.
I've tried disabling and re-enabling "use wireless networks" for location setting, and also I've ensured that background data and auto sync are both ON.
Google maps evidently knows where I am from the cellphone data, so apparently the locations data is being received from the cell towers. Presently using THREE as service provider.
Is there a way to reset the weather settings? I'm reluctant to manually clear all the data from the associated apps in case it completely breaks it, and I don't really want to factory reset.
Ideas, anyone ? Thanks.
- Steve
fasty said:
OK, this is really bugging me.
(and yes, I know that there are similar topics elsewhere but none of them actually seem to help me resolve the problem)
Until recently, my weather application would automatically and correctly identify and show my nearest TOWN as the "current location". This also appeared on the homescreen.
Now, for some reason, it's persistently only giving me the COUNTRY as current location, i.e. United Kingdom in my case.
The only thing I've changed recently was to remove one or two of the cities that I wasn't interested in from the list, and added a couple of other ones.
I've tried disabling and re-enabling "use wireless networks" for location setting, and also I've ensured that background data and auto sync are both ON.
Google maps evidently knows where I am from the cellphone data, so apparently the locations data is being received from the cell towers. Presently using THREE as service provider.
Is there a way to reset the weather settings? I'm reluctant to manually clear all the data from the associated apps in case it completely breaks it, and I don't really want to factory reset.
Ideas, anyone ? Thanks.
- Steve
Click to expand...
Click to collapse
my suggestion may be clear the weather data from applications find the weather app and clear all data!!
restart the app..might pick up ur town!!
Thanks Muru11.
Curiously though, a colleague's HTC phone (a Wildfire S) has started doing exactly the same thing. It just displays "United Kingdom" for weather.
He's on a different network too.
I'm wondering if the weather forecast provider or HTC have upset the database for our area. I'm going to sit back and wait for a while before taking any drastic measures!
- Steve
Update : A search through the HTC UK page on facebook suggests that this problem is affecting quite a few HTC UK users.
HTC proposed a solution to one person, which involved twiddling a lot of settings and apparently didn't work.
Hopefully the issue has been escalated.
- Steve
Hey everyone,
I'm experiencing a couple minor issues with my MyTouch 4G Slide and wanted to see if anyone had any input.
First is the weather location... when I am at work my phone's weather location always gets all weird. It happened with my G2 (before this phone) as well. On the G2, it would show my location as in Japan. With the MT4GS, it shows as Denver CO. It updates when I leave the building, but it is still frustrating for numerous reasons. First, the time on my phone switches to Denver's time zone while at work. It throws me off whenever I look at my phone. Also, after I leave and the location updates, it doesn't update the time zone. I have to go to Settings -> Date and Time, and uncheck and recheck 'Automatic' for it to switch back to the correct time zone. Finally, while Maps will read my location just fine, other location-based apps seem to be thrown off as well.
One other question is about the hardware keyboard. I have Prediction turned on in settings but it never works. It's nice with the hardware keyboard because I can skip the alt+ keypresses for punctuation and it inserts automatically, and it will capitalize I, etc. If I'm not mistaken, this hasn't worked since the recent HTC update that moved us to Google Play Store.
If anyone has fixes and/or other info about these issues, I'd appreciate your input! Thanks so much.
Are you connecting to your work's wi-fi automatically when you are there? It could be that the location information (which would affect weather and time) is using your IP address info. I know when I connect to my wi-fi at home, it will alter my location to a nearby suburb.
Fuzi0719 said:
Are you connecting to your work's wi-fi automatically when you are there? It could be that the location information (which would affect weather and time) is using your IP address info. I know when I connect to my wi-fi at home, it will alter my location to a nearby suburb.
Click to expand...
Click to collapse
I wish! Our WiFi doesn't even show up on my phone... they must have the SSID hidden. I think it's because the building is older, and it must have lots of concrete or something because radios, cell phones, etc don't work well in here. Mine only works because my desk is right by the main entry door and a few windows. I'm assuming that the GPS signal could get thrown off by that as well. I'm just hoping since Maps can locate me that maybe I could fix the rest of the location-based services.
retrokick said:
I wish! Our WiFi doesn't even show up on my phone... they must have the SSID hidden. I think it's because the building is older, and it must have lots of concrete or something because radios, cell phones, etc don't work well in here. Mine only works because my desk is right by the main entry door and a few windows. I'm assuming that the GPS signal could get thrown off by that as well. I'm just hoping since Maps can locate me that maybe I could fix the rest of the location-based services.
Click to expand...
Click to collapse
It may not even be getting a GPS signal, instead relying upon the location data of the celltower you're linked with. I've seen the location info being off by neighborhoods, but not to the extreme you've mentioned.
Uncheck the automatic update, then it will stay in the right timezone.
Also, I use swiftkey x, it has the best word prediction, and works great with the hardware keyboard.
yellowjacket1981 said:
Uncheck the automatic update, then it will stay in the right timezone.
Also, I use swiftkey x, it has the best word prediction, and works great with the hardware keyboard.
Click to expand...
Click to collapse
Thank you for the recommendation! The app is downloading now and I'm already excited because of the amazing reviews it got. I'm sure I'll love it. I was hesitant to uncheck the automatic setting because I want it to sync the time... but now that I think about it, once the time is set from the network... why would it need to sync? Unless I do a battery pull or something.
Hi guys,
I run PA 4.4 for like 10 days now. Since a week ago I have strange locations in my Google location history - constantly, when not moving - and rather accurate when I am outside (maybe has something to do with the wifi connection when stationary at home or at work?)...
One interesting part of it is: the first days of my new PA experience everything was fine. So probably it does not have anything to do with it. That first day I had the issue my phone crashed earlier while I was outside and I had to do a reboot. Maybe some settings were changed during that!? Or... maybe it doesn't and it's just a coincidence after some apps where updated (Google Search or so)...
I tried quite some settings to figure out what happens here - and it is not trivial - to my mind:
I did another clean install of the ROM; had the same issue again
I changed between "high accuracy" and "battery saving" mode in the location settings; no change
I went to the developer settings and unchecked "accept mock locations" (is that how the option is called in English?); no change
I have a Nexus 10 also running Android 4.4.4 and started to record my location history from that device with different settings: all are fine and accurate! When I record from both devices I can actually see my history jumping in 5-minute-mode...
Any ideas, any suggestions?
Please...
Two more findings, which make this issue even stranger:
When I move in the house - e.g. 2nd instead of ground floor - I get different locations, some 100 or 200 meters away, but both far from home.
I turned wifi off for one and a half hour - that resulted in perfect locations!! Locations were inaccurate after turning wifi on again...
What is wrong here?? So I get more inaccurate locations when connected to wifi!?
i always run straight gps and never wifi. imo its a conflict of interest.
gps is dead accurate, so the only time you could benefit from wifi is when you are in a building with no gps signal, and frankly, why would i need 100% accurate gps if im already in the building.
again imo, what is happening is, it can only reference wifi that it knows the exact location of. it has no way to tell how far from that wifi you are, so its guessing based on a limited gps signal and known wifi points.
i think its a waste of battery to be scanning wifi points all the time any ways, unless you have a constant use for it.
bweN diorD said:
i always run straight gps and never wifi. imo its a conflict of interest.
Click to expand...
Click to collapse
Thank you for the answer! And I sort of agree...
But the question is:
what did change that day when my location started to be different? I never had problems for more than two years of using the location history. Even after moving in April everything was fine with the wifi locations. I get one accurate reading like every one to three hours - so the location jumps from time time. Why is that? Is that a gps reading?
Plus: how could I change the settings? The only thing I can chose from is: "battery saving" (cell towers and wifi) or "high accuracy" (the same plus gps). I selected the second option but obviously still the Google location service does not really use it. When I turn off wifi it can only use cell towers plus gps... but obviously I want to be connected to the wifi when being at home.
I can't say why it started acting up.
If you use WiFi you are kinda stuck.
I only have GPS on and denied anything that wants to use WiFi for any reason.
I don't know where the option is found, but I remember it asking if I wanted to use WiFi to help results or something like that, I chose no.
Sent from my LG-VS980 using XDA Premium 4 mobile app
bweN diorD said:
I don't know where the option is found, but I remember it asking if I wanted to use WiFi to help results or something like that, I chose no.
Click to expand...
Click to collapse
I guess that option is the "use wifi for location detection although wifi is turned off" which can be found in the wifi advanced options. But I turned that on and off, no change.
But one more test from myself:
I let wifi on but disconnected from my home network. The result is: accurate locations! So the problem is not the wifi itself but a connected wifi!? And it is not only the home network because I had the same issue at work.
Plus: we just had a thunderstorm, that could have been the reason why cell towers and/or gps reacted differently: my location was at some new place about more than a mile away. The worst thing is: accuracy of that location point was about half a mile -- which means: my real location was not inside the accuracy cycle (that blue cycle when using location history)!!
The accuracy cycle is always very small when I get the real readings at home and always about half a mile in radius when somewhere else...
that is basically the problem with using wifi to help. there are too many variables. location needs to know the location of the wifi, but then there is a broadcast radius that decreases accuracy. there is also the question, what does it do when you are connected to a wifi it doesnt know the location of?, that could cause inaccuracy. maybe it makes an uneducated guess, who knows. there is also the issue, what if it thinks it knows the location but its actually wrong?
the list of possible scenarios could go on and on as to why it isnt reporting correctly.
the only way to truly know why it is wrong is to find out why exactly it thinks you are where you are when its wrong. there has to be some exact source of information its using to base your wrong location on. unfortunately, i doubt there is any way for the common user to get this information, let alone take corrective action so its not inaccurate in the future.
wrong locations only when wifi is connected, only on one device
OK, what do we already know?
I have the problem for some 8 to 10 days now. Never had it before, only have it on one device.
Maybe a coincidence but this behavior started on a day where my phone crashed and I had to reset.
I made a clean new re-install of the PA 4.4 and recently received the update to PA 4.42. There are no changes in the behavior.
It is only my phone (running ParanoidAndroid based on KitKat 4.4.4), my tablet (Nexus 10 running stock KitKat 4.4.4) does not have this problem (so it's no wifi relocation because of moving or such general problem).
I have the problem with more than one wifi! Have already seen these false locations when connected to the home and when connected to the work network. Problems with both networks started the same day...
Wrong locations are constantly there when my phone is connected to a wifi.
It's not always the same location, sometimes I get different readings, but it's 90% a position ~430m west of my home.
The correct locations have high accuracy (a few meters), the wrong locations have very low accuracy (~1000m or even more).
When I start Google Maps (i.e. probably when the phone uses gps) I can see my position moving towards the correct location.
When I switch off wifi or when leave wifi on but disconnect my phone from the network, then I get the correct location constantly.
Roughly every 1 to 3 hours there is one correct location within the list of false locations.
I tried virtually every combination of settings, "high accuracy" and "battery saving" for the location service, "no mock locations" in the advanced developers settings, "use wifi for location detection although wifi is switched off" in the wifi settings, ...
Is there some sort of cache that might be corrupted!?
Is there a possibility to force using gps?
What else...
Tho-D said:
OK, what do we already know?
I have the problem for some 8 to 10 days now. Never had it before, only have it on one device.
Maybe a coincidence but this behavior started on a day where my phone crashed and I had to reset.
I made a clean new re-install of the PA 4.4 and recently received the update to PA 4.42. There are no changes in the behavior.
It is only my phone (running ParanoidAndroid based on KitKat 4.4.4), my tablet (Nexus 10 running stock KitKat 4.4.4) does not have this problem (so it's no wifi relocation because of moving or such general problem).
I have the problem with more than one wifi! Have already seen these false locations when connected to the home and when connected to the work network. Problems with both networks started the same day...
Wrong locations are constantly there when my phone is connected to a wifi.
It's not always the same location, sometimes I get different readings, but it's 90% a position ~430m west of my home.
The correct locations have high accuracy (a few meters), the wrong locations have very low accuracy (~1000m or even more).
When I start Google Maps (i.e. probably when the phone uses gps) I can see my position moving towards the correct location.
When I switch off wifi or when leave wifi on but disconnect my phone from the network, then I get the correct location constantly.
Roughly every 1 to 3 hours there is one correct location within the list of false locations.
I tried virtually every combination of settings, "high accuracy" and "battery saving" for the location service, "no mock locations" in the advanced developers settings, "use wifi for location detection although wifi is switched off" in the wifi settings, ...
Is there some sort of cache that might be corrupted!?
Is there a possibility to force using gps?
What else...
Click to expand...
Click to collapse
I guess you shouldn't rule out that it is an issue caused by the ROM some how.
On my phone I can force it to use GPS only, I have the option anyways.
Under location I have device only or something like that, it says it only uses GPS when that option is selected.
Sent from my LG-VS980 using XDA Premium 4 mobile app
bweN diorD said:
I guess you shouldn't rule out that it is an issue caused by the ROM some how.
Click to expand...
Click to collapse
I thought about that, too. Means to installiert something else, CM11 vor so...
There's the option "device only".
That option does not record the location history, afaik.
Which means: Google Now does not work. So that's not an option...
Tho-D said:
There's the option "device only".
That option does not record the location history, afaik.
Which means: Google Now does not work. So that's not an option...
Click to expand...
Click to collapse
Ohh OK, I didn't know that. Thanks for the info
Sent from my LG-VS980 using XDA Premium 4 mobile app
Tho-D said:
There's the option "device only".
That option does not record the location history, afaik.
Which means: Google Now does not work. So that's not an option...
Click to expand...
Click to collapse
so i did a little test today on the way home from work, as i took a different route than normal to avoid traffic.
when i started "maps" i had to allow google location services to navigate. so im pretty sure you can use device only as long as you allowed google location for apps, as it said something about my google now functionality when i turned it off after navigating.
last week i navigated a 3 hour trip, on a different rom, with no issues. today, maps couldn't seem to start gps to find my location to start navigating. so i turned on "high accuracy", more to test than anything else, and it found my location and we were navigating home .
i knew where i wanted to go but at some points that varied from where maps wanted me to go. for a while it did good at making quick corrections to my path. about 20 minutes in, i didn't follow its directions again. well this time, it didn't recognize that i didn't turn, then advised me to make a subsequent turn onto a road that was off the road i didn't turn onto. now, the road i am on is about 1/4 mile from the road it thinks im on, the 2 roads are parallel. well it took maps over a mile, after i made another turn towards the road it thought i was on, before it realized it was wrong and made corrective instructions. after that, i made a quick stop to grab some liquid refreshment for the night and turned off navigation, as i was close to home.
this really goes to prove nothing more than "high accuracy" is not always highly accurate. i traveled across 3 states last week for 3 hours on "device only" and never once was it wrong about my exact location.
just wanted to share my experience, really doesn't help or fix your problem, but may shed some light on the possible inaccuracies across multiple devices.
bweN diorD said:
so im pretty sure you can use device only as long as you allowed google location for apps, as it said something about my google now functionality when i turned it off after navigating.
Click to expand...
Click to collapse
I tried this and yes, Maps works with the "device only" setting. But when using Now it said that location-based cards (weather, traffic, ...) only work with "high accuracy" or "battery saving". So for me this setting is useless.
I guess I'll do another clean install and try CM11 or so...
it's not ROM related
I trid to install CM11 M8 today. For some reason I wasn't able to, received these strange "Unfortunately process ... has stopped" messages all the time and was not able to complete the initial setup. The only hint I found online is to make sure CWM recovery is up to date. I use v6.0.5.0 which I assume is up to date.
So I made another clean install of PA 4.42. Then I downloaded another ROM: did a clean install of SlimKat. This went smoothly, but I have the same location problems, both times!!!!
I guess we can be sure my location problems are not related to the ROM.
One thing I saw that seems noteworthy: I had correct locations for some time and then the wrong locations started again. Maybe this has to do with the system restoring backed up settings or installing / updating all the apps!?
Any ideas?
Tho-D said:
I trid to install CM11 M8 today. For some reason I wasn't able to, received these strange "Unfortunately process ... has stopped" messages all the time and was not able to complete the initial setup. The only hint I found online is to make sure CWM recovery is up to date. I use v6.0.5.0 which I assume is up to date.
So I made another clean install of PA 4.42. Then I downloaded another ROM: did a clean install of SlimKat. This went smoothly, but I have the same location problems, both times!!!!
I guess we can be sure my location problems are not related to the ROM.
One thing I saw that seems noteworthy: I had correct locations for some time and then the wrong locations started again. Maybe this has to do with the system restoring backed up settings or installing / updating all the apps!?
Any ideas?
Click to expand...
Click to collapse
the only way to rule out the rom's is to return to stock and check it there.
its not uncommon to have similar issues across multiple rom's.
im not saying you are wrong, changing from one rom to another is just not a good way to check an issue.
bweN diorD said:
the only way to rule out the rom's is to return to stock and check it there.
its not uncommon to have similar issues across multiple rom's.
im not saying you are wrong, changing from one rom to another is just not a good way to check an issue.
Click to expand...
Click to collapse
Oh, is that the case?
Then I should install the stock Samsung ROM and check. Probably will do it in a few days since I am busy the next days.
BTW: I installed SlimKat and then PA again. After installing SlimKat I now have TWRP instead of CWM recovery and the settings of 5x5 Icons on the home screen plus smaller font size and probably a few other settings remain in PA although I did factory reset, format cache and so on...
The thing is: how can I change this back!?!? Didn't find it in the settings. It'not font size (which is set to 100%).
Tho-D said:
Oh, is that the case?
Then I should install the stock Samsung ROM and check. Probably will do it in a few days since I am busy the next days.
BTW: I installed SlimKat and then PA again. After installing SlimKat I now have TWRP instead of CWM recovery and the settings of 5x5 Icons on the home screen plus smaller font size and probably a few other settings remain in PA although I did factory reset, format cache and so on...
The thing is: how can I change this back!?!? Didn't find it in the settings. It'not font size (which is set to 100%).
Click to expand...
Click to collapse
there is another partition thats not normally wiped with a factory reset. i believe its called "data/media". the official cwm's that i have used have an option to wipe this separately, but i havent seen this option in twrp, or know if it wipes it by default. my guess would be no, but i could be wrong.
anyways, some settings and/or app data is stored in this area. you likely need to wipe this to fix the problem. that would be my best guess anyways.
bweN diorD said:
there is another partition thats not normally wiped with a factory reset. i believe its called "data/media". the official cwm's that i have used have an option to wipe this separately, but i havent seen this option in twrp, or know if it wipes it by default. my guess would be no, but i could be wrong.
anyways, some settings and/or app data is stored in this area. you likely need to wipe this to fix the problem. that would be my best guess anyways.
Click to expand...
Click to collapse
Just rebooted into recovery and was surprised its CWM again!? Anyways, good its back!
The one option I always used is "wipe data/factory reset" (plus of course "wipe cache"). Under "mounts and storage" there's an extra option "format /data". Should I try this one?
Tho-D said:
Just rebooted into recovery and was surprised its CWM again!? Anyways, good its back!
The one option I always used is "wipe data/factory reset" (plus of course "wipe cache"). Under "mounts and storage" there's an extra option "format data". Should I try this one?
Click to expand...
Click to collapse
I'm pretty sure it says data/media. I don't have cwm on right now or I would check, but I think it is under mounts and storage. It was in the same dir where you can format system and such if I remember correctly.
Its also possible someone removed that option from your version, but I don't know why they would unless your phone doesn't have that partition.
Sent from my LG-VS980 using XDA Premium 4 mobile app