Related
Hi all
About a week ago now I attempted to install a custom ROM (King 3D ROM) Which was going fine until it rebooted and froze on the startup screen. I have tried literally EVERYTHING, and I have had a look around this forum but nothing here seems to work....I also wiped everything off the phone including the OS :-/
So any help would be muchly appreciated!!
Thank you in advance
Scarecrow234
And phone is (obviously) the Lg optimus 3D on Vodafone.
Hi, are you able to get your phone in to debug mode? What recovery methods have you tried?
Hi there, well the only screen I can get into is ClockWorkMod Recovery v5.0.2.0 so no i'm afraid debug mode isn't possible. Is that helpfull?
not bricked. flash a new rom.
is it literally "frozen" or is it stuck on the startup screen with the flashy colors?>
if its just flashy colors then its probably fine. just leave it on for a while and it shall work eventually . its usually slow the first time you flash a ROM onto your phone.
if all else fails try this http://forum.xda-developers.com/showthread.php?t=1287236
The easiest way is to use Recovery Phone through LG Update Tool, under CS tab.
Already attempted to install a new ROM, I tried the stock 2.3.5 ROM but that turned back an error which I cant remember off hand, and kind 3D ROM again but failed aswell.
Well it froze at the "flashy colours" but now it just stays at the lg screen as i wiped the OS off accidently. And I just attempted that but when opening UpTestEX_mod2_marwin.exe it comes up with -This application has failed to start because lgmobileDL.dll was not found. Reinstalling the application may fix this problem.- and I did try downloading it again with no luck.
Okay so LG mobile support tool is now recognising my phone and says start updating but when I click it it gets upto -checking the connection with Cell phone- and then comes up with the error message -Problem with communication between cell phone and PC- does anyone know how to bypass this or anything of the sort?
okay so i managed to open this http://forum.xda-developers.com/showthread.php?t=1287236 on my computer but it comes up with 18:36:27 : [C:\LGMobileUpgrade] Try to delete folder
18:36:27 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
18:36:27 : Start Date : 2012-01-08 18:36:27
18:36:27 : ---------- QM Testmode ---------
18:36:27 : ***** Check Tool Version *****
18:36:27 : Tool version : 1.5.4.7
18:36:27 : UpgradeDLL version : 1.2.6.7
18:36:27 : Current Dir : C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\B2C_Client
18:36:27 : LGE USB Driver Version : 4.9.8.1
18:36:27 : Android PDLV Version :
18:36:27 : Android NDLV Version :
18:36:27 : ******************************************
18:36:27 : [C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone] Try to delete folder
18:36:27 : RemoveDirectory1 Error(2):C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone
18:36:27 : SetEmerModeAT()
18:36:27 : _IsConnectedPhone Call
18:36:33 : _IsConnectedPhone(1)
18:36:33 : 0 - NotConnected.
18:36:33 : 1 - Normal connect success
18:36:33 : 2 - Emergency connect success
18:36:34 : _IsConnectedPhone Call for SmartPhone
18:36:34 : _IsConnectedPhone(0)
18:36:34 : 0 - NotConnected.
18:36:34 : 1 - Normal connect success
18:36:34 : 2 - Emergency connect success
18:36:34 : *****CheckOS Start********
18:36:34 : Microsoft_Windows_XP_Home Edition_Service Pack 3
18:36:34 : *****CheckPCSyncPrograms Start*****
18:36:34 : PCSyncPrograms Not Found - OK and ready to upgrade
18:36:34 : Checking the connection with the cell phone...
18:36:34 : dwWaitResetTime(40000 ms)
18:36:35 : _IsConnectedPhone Call
18:36:41 : _IsConnectedPhone(1)
18:36:41 : 0 - NotConnected.
18:36:41 : 1 - Normal connect success
18:36:41 : 2 - Emergency connect success
18:36:41 : Phone Mode(1)
18:36:41 : *****GetPhoneType Start*****
18:36:41 : [011,700,147,062,092]Updating is not possible any longer due to a fatal error.\n\n[009,400,102,102,102]Disconnect from and connect the cable into your phone again and remove \nand install the battery and press the [009,700,102,102,102]'Restart'[009,400,102,102,102] button. This will resume the \nupgrade.\n\n\n\n\n\n\n\n\n\n\n\n\nPress the [009,700,102,102,102]Quit[009,400,102,102,102] button to stop the update. (_CheckPhoneType() Error)
18:36:41 : !pUpgrade->StartProcessing ... PostMsg STEP_TYPE_ENV_ERROR
18:36:41 : Page_Error ºÎºÐÀÔ´Ï´Ù
18:36:42 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
18:36:42 : OnStepMsg STEP_TYPE_ENV_ERROR delete m_pLGCyonUpdate
Any ideas?
scarecrow234 said:
Okay so LG mobile support tool is now recognising my phone and says start updating but when I click it it gets upto -checking the connection with Cell phone- and then comes up with the error message -Problem with communication between cell phone and PC- does anyone know how to bypass this or anything of the sort?
Click to expand...
Click to collapse
OK your phone is fine, you need to just keep at it, LG tool is best option for now, make sure your phone is well charged, remove old version of tool and remove drivers, download new tool and install drivers select windows xp for compatibility.
If all else fails try another pc.
Hi people, all is okay now the http://forum.xda-developers.com/showthread.php?t=1287236 way worked perfectly and my phone is nnow running!!! thank you all for the help!!!!
These steps are mainly directed at how to use the KDZ program to switch your baseband/fixing unknown baseband.
*I have heard this works on Windows Vista/7 but I personally have only been able to accomplish it through Windows XP*; VMWare running XP and XP Mode also work but make sure the USB is consistently being connected to the XP environment (don't jack around outside it) or the process will hang & require you to start over!*
1. You do NOT need to have stock recovery installed for this to work, it will require you to reflash CWM after though - How to NvFlash CWM Recovery
2. If you are not on a stock ROM prior to doing this your phone will get stuck in a boot loop of the stock T-Mobile animation when the process is finished; until you reflash CWM Recovery and restore a backup
Notes:
[While on a custom ROM and Recovery]
I have had the kdz method hang after the baseband flash but before installing the stock ROM & Recovery, leaving everything but the baseband unchanged; this could happen for you but I recommend making an Nandroid still if you care about losing your current data; similar log of how it will appear if this happens: Baseband flash hangup
[Modem causing process to hang]
The process may hang due to the LG Modem driver, disabling and re-enabling it should fix this (Start --> Run --> devmgmt.msc --> Modems --> LGE Android Platform USB Modem --> Disable/Enable)
Needed files:
T-Mobile G2x Android USB Driver - drivers so your computer recognizes phone
V11H_00.kdz | Mirror 1 - data for the June 05 2011 baseband (WIND MOBILE)
V21E_00.kdz | Mirror 1 | Mirror 2 - data for the July 15 2011 baseband
V21Y_00.kdz | Mirror 1 | Mirror 2 - data for the March 11 2012 baseband
KDZ_FW_UPD_EN - software to install the baseband
APX Drivers & NVFlash - driver and software to flash Clockwork Recovery on your phone again
P999 V10F Nandroid - Nandroid of stock 2.2.2/V10F ROM
P999 V21E Nandroid | Mirror 1 | Mirror 2 - Nandroid of the stock 2.3.3/V21E ROM
P999 V21Y Nandroid | Mirror 1 | Mirror 2 - Nandroid of the stock 2.3.4/V21Y ROM
LGMobile Support Tool - Checks if the LG ROM/Baseband is outdated
Call audio fix for V21E Baseband | Mirror 1 - Fix the audio issue during a call with the V21E baseband on a custom ROM
Call audio fix for V21Y Baseband | Mirror 1 - Fix the audio issue during a call with the V21Y baseband on a custom ROM (So you can still be on CM9 nightlies thanks to owain94)
If you're trying to update from the V21E/July 2011 baseband to the V21Y/March 2012 baseband you should only need the LGMobile Support Tool and be on a stock 2.3.3 ROM to get the new baseband.
Download whichever file(s) you need from above; if you've been crack flashing with your computer already you should only need the KDZ program & the V21E/V21Y baseband file
Install the G2X driver onto your computer
Extract the KDZ_FW_UPD_EN archive and right click the "msxml.msi" file and select Install
Next keep your finger held on the Volume Down button of your phone and connect the USB cable to the phone and computer and wait until your phone displays "S/W Upgrade; if your computer says it detected a device it needs a driver for extract the APX/NvFlash zip and navigate the computer to the APX folder for the driver"
Open the "KDZ_FW_UPD.exe" file and click the folder icon to locate the KDZ file
After you have navigated to the KDZ file select it and push "Launch software update"
The log will instantly show:
Code:
15:54:41 : Launching SW update
15:54:41 : Unpacking KDZ
*The program will hang for a minute or two while it is unpacking the file don't worry!*
After you will see some information similar to this:
Code:
15:54:51 : KDZ file extraced
15:55:08 : Files were extracted.
15:55:08 : LGMobileDL Load.
15:55:08 : Port = 4
15:55:08 : Connecting to phone
15:55:20 : Check Phone mode = 1
The program will pause again for a minute and then this will display:
Code:
15:55:57 : Phone type check.......
15:55:57 : LGMobileDL.DLL Loading....
15:55:57 : _SetAuthMark Fail
15:55:57 : AuthMark°¡ Á¤È®È÷ Phone¿¡ Write µÇÁö ¾Ê¾Ò½À´Ï´Ù!
15:55:57 : _SetAuthMark Fail
15:55:57 : LoadCDMAPhoneData() Error
15:55:57 : _DetachDLL Call
15:55:57 : _DetachDLL Call End
15:55:57 : Param : Path = C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone\V21E.wdb
15:55:57 : Param : moduleDir =
15:55:57 : Param : waitTime = 33000
15:55:57 : Param : UsbHighSpeed = 0
15:55:57 : Param : PhoneMode = 1
15:55:57 : Param : BinVersion = V21E_00
15:55:57 : Param : AuthMark = 0
15:55:57 : Call fn_StartUpgrade
Last you will hear your USB disconnect/reconnect multiple times while seeing this spammed; this will keep going until the value of "lParam = 100"
Code:
15:56:07 : CDMA: wParam = 2006, lParam = 0
15:56:07 : Model Dll Msg Not Found(2006, 0)
Once the program has reached 100 your phone will reboot displaying the LG Logo and after a few moments it will boot up running the chosen baseband.
About to do this (http://support.lgforum.com/lg/topics/t_mobile_g2x_update_for_sound_quality) to my phone, to update the baseband and in the name of science.
I'll let you know how it goes.
And then, I'll be flashing over RC3 because as per (http://forum.xda-developers.com/showthread.php?t=1679892) it works with the new baseband.
Wait about an hour or two and I'll have something posted.
Maybe...
http://forum.xda-developers.com/showthread.php?t=1287321
or...
http://forum.xda-developers.com/showthread.php?t=1619932
E: 5 Hours later I got it, back on July baseband and phones working, so happy ROFL
xBkKx said:
E: 5 Hours later I got it, back on July baseband and phones working, so happy ROFL
Click to expand...
Click to collapse
Yay! I use a VM of XP too...so much easier
Sent from my LG-P999 using Tapatalk 2
Gotta love XDA's finest. You guys make it hard to actually brick a phone. In the end there will always be a way out of a brick so long as we have XDA developers supporting the device I'm stuck at the S/W Upgrade screen from a failed baseband update using the LG tool and I'm trying this method now. My IParam is scrolling so I'm sure it's doing the job.
Booted and everything's great. It's unfortunate that I restored to a stock ROM and used the LG Tool which failed miserably before using this method instead. I thought this method took more work and look at that, for being hard-headed I ended up having to do more work than I would have had I just done it this way from the beginning.
Lucky me - my "new" replacement phone showed up and I went to work getting it all setup; rooted, ROM loaded, apps and settings - went to make a phone call and experienced what I am assuming to be "the "chirping" sound during a call" cited for the V21Y March 11, 2012 baseband. My settings verified the culprit baseband in question.
I am currently running through TGA_Gunnman's "NANDROID Restore Stock FR 2.22 V10f / GB 2.33 V21e and 2.34 V21y" tutorial to get back to stock and then unroot to follow this one. I am assuming I will need to use the "V21Y_00.kdz - data for the March 11 2012 baseband" but I'm bit unclear on how the "V21Y-BB.Fix.zip" plays into your instructions.
Any assistance would be greatly appreciated. - THX!
That bb fix zip is what owain made, just flash that to fix the chirping noise if you have it, it's so you can be on the new baseband and also a custom ROM
Sent from my LG-P999
That sounds good - I am running into trouble with the update however. I get all the way down through a bunch of the IParams till it hits this one -CDMA: wParam = 2010, IParam = 3035
Model Dll Msg Not Found(2010, 3035)where it just hangs indefinitely. Tried it a few times and have a log saved if that would be of any help. I'm using an actual Windows XP machine (not a VM).
Thoughts?
Edit: Why do I get the sinking feeling I could have just flashed the BB fix to begin with? * sigh *
Is the USB connection staying connected? It disconnected around that on me sometimes and I had to retry, you could also try going into device manager and finding the LG Modem and disabling and re enabling it really quick (if the process hanged at a specific area during the Param spamming session longer than a minute it basically timed out, at least for me)
You said you were on the March baseband so why are you flashing it again? You need to V21E if you're switching. V21E July 15 2011/ V21Y March 11 2012 are the basebands.
You probably did just need to flash the bb fix zip that's why I mainly mentioned that :/ been at work so I'm sorry I haven't been able to be more clear
Sent from my LG-P999
Yeah - I ran the LG tool just to confirm my suspicions... guess I should have done that first. I did quite a bit of searching on the issue before deciding to nuke but didn't find the info spelled out for me (I'm still a rather "step by step" n00b, unfortunately)
It all works out though - The Eaglesblood ROM I was/am using updated since the version I installed Tuesday. It not only included the fix but a sweet install interface that did a lot of the leg work for me! - I am up and running great now! I used Titanium Backup Pro so the setup process wasn't quite so laborious.
Thanks for the help - and responses from work
When I'm doing this to get from 2.3.3 to 2.3.4 for the y21y BB the kdz update will get to the part where it says
15:56:07 : CDMA: wParam = 2006, lParam = 0
15:56:07 : Model Dll Msg Not Found(2006, 0)
But a few seconds later it will give me a runtime error.
Edit:
To be exact this is the full error.
Runtime Error!
Program: ...gs\administrator\desktop\stuff\kdz fw upd\kdz_fw_upd.exe
abnormal program termination
Edit2:
Decided to run VMware and windows xp on my desktop to see if it was just my laptop and lo behold it was something with my laptop.
It is currently installing and will come back to this if anything goes wrong or have in opinions.
Works fine for me. I just downgrade it to July baseband.
USB cable -> make sure you use the original cable from LG.
1st time flashing -> use Nokia cable -> failed -> stuck at Iparam=40++. (CWM is not removed). After reboot. The Phone Shows BB as July and bluetooth for car is working again. (So eventhough its stuck, the BB is already showing as July)
2nd time flashing -> use original LG cable -> works fine until Iparam=100. (CWM is removed when the program completed).
Thanks
I kept getting "mod uptestex mfc has stopped working" with vista. I needed to use VMware to run XP and then I was finally able to get it to downgrade to July 2011. Also once it gets to 100 you need to just unplug the phone because it will continue to bootloop until you install CWM and flash a rom or restore a nandroid. If you are doing this to get Bluetooth working in CM7.2 you will need to reflash 7.2 over your current 7.2 or you will have no call audio.
I am trying to flash v21y using the KDZ_FW_UPD tool
I am getting the error phone not found?
[R&D Test Tools Log File]
04:33:24 : Launching SW update
04:33:24 : Unpacking KDZ
04:33:35 : KDZ file extraced
04:33:38 : Files were extracted.
04:33:38 : LGMobileDL Load.
04:33:52 : Port = 0
04:34:06 : Connecting to phone
04:34:32 : PHONE WAS NOT FOUND!
04:34:34 : ===FINISHED===
vincy24 said:
I am trying to flash v21y using the KDZ_FW_UPD tool
I am getting the error phone not found?
Click to expand...
Click to collapse
In Device Manager under Modems make sure LGE Mobile USB Modem is enabled it will appear in there when the phone is connected and in the S/W Upgrade screen.
I tried this again on a fresh install of XP on my VMWare and it went fine..the KDZ Program should have "Type: CDMA" and "PhoneMode: DIAG" (should be default) as the options also, in case you messed with it.
solution here
http://forum.xda-developers.com/showthread.php?t=1619932
really works with unknown baseband
Dumb enough to get in trouble, smart enough to not make it worse
So, thought I was slick, I'm not, I'm a noob. Tmobile G2x in North America (Dallas, to be exact.) Was running 2.3.4 stock.
Downloaded & installed EAGLESBLOOD™ ICS AOSP [4.0.4]. Unfortunately, despite some thought of "was there a warning about this? I think I saw something somewhere" I did flash the baseband radio during the install.
Phone runs fine now, just have the dreaded click/thump noise and limited data. Can't make calls
Searched and found this thread. Looks like the cure but I'm unclear:
- Do I have to go back to stock (and if so, is there any concensus on which method to follow. I've seen several different threads)
- If I follow this thread, which files do I download/install? When I pull up "About Phone" I have baseband version M6600A-SCAUTNZ-2.0.9720T 1 [Mar 11 2012]
I'm sorry for my ignorance but I thought I'd ask before I install something and only make my problems worse.
Thanks,
Jeff
crosjn said:
So, thought I was slick, I'm not, I'm a noob. Tmobile G2x in North America (Dallas, to be exact.) Was running 2.3.4 stock.
Downloaded & installed EAGLESBLOOD™ ICS AOSP [4.0.4]. Unfortunately, despite some thought of "was there a warning about this? I think I saw something somewhere" I did flash the baseband radio during the install.
Phone runs fine now, just have the dreaded click/thump noise and limited data. Can't make calls
Searched and found this thread. Looks like the cure but I'm unclear:
- Do I have to go back to stock (and if so, is there any concensus on which method to follow. I've seen several different threads)
- If I follow this thread, which files do I download/install? When I pull up "About Phone" I have baseband version M6600A-SCAUTNZ-2.0.9720T 1 [Mar 11 2012]
I'm sorry for my ignorance but I thought I'd ask before I install something and only make my problems worse.
Thanks,
Jeff
Click to expand...
Click to collapse
Flash the rom again and when it gives you the option for baseband, click the 21y option. That'll fix the calling issue.
Sent from my LG-P999 using xda app-developers app
So awesome
Thanks, phone running muy bueno now. And who knew it was that easy to repair!
Many many thanks
Hi Everyone,
I've been given a friends phone to repair which he got with 'no emie' number showing, hence no signal. ClockwordMod recovery works fine and you can flash any custom 21e rom.
I've tried everything below on both an XP and Win 7 machine. All the procedures work fine on my P920 but fail on his. Both phones are running the same rom and kernel with 'Software Version: LGP920-V21e-Apr-19-2012' and 'Baseband version: L6260_MODEM_SIC_01.1042.00'.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-
[Method/Attempt: 1]
At first I assumed it was a simple case of restoring the imei number with 'tutty' using this guide:
[GUIDE] Unlock Phone / Recover IMEI
With my working P920 connected, when I switch the port settings to 'CP Image Download' the new driver is installed and everything in the terminal window works as it should:
When selecting 'CP Image Download' on the faulty P920, you get one beep where it disconnects and no new hardware is detected or drivers installed. All the connection the connections detected when it connected in developer mode are all gone from device manager. Hence, there are no working ports for Tutty to use. As expected, when trying to connect to a port detected in dev mode without switching the port settings to 'CP Image Download', tutty's blue terminal window either gives an error or doesn't respond to any keyboard input.
I next tried re-flashing a baseband in download mode using two different versions of SmartFlash. Both give a 'Timeout error' when trying to connect to the IFX Modem.
Mine flashed without any problems:
[Method: 2]
I next attempted to return to stock using the LG Flash Toolk files via The Dark Lestat's guide:
[GUIDES/TOOLS]Making Developing/Flashing/Returning to Stock Easier
The 1st attempt was with V21D_00.kdz but it kept hanging at Step : TYPE_WPARAM_IFX_DN_POS and failing at 30%.
Code:
17:56:15 : Call Retry Thread
17:56:15 : Checking the connection with the cell phone...
17:56:15 : Checking the connection with the cell phone...
17:56:15 : dwWaitResetTime(40000 ms)
17:56:19 : _IsConnectedPhone Call
17:56:58 : _IsConnectedPhone(2)
17:56:58 : 0 - NotConnected.
17:56:58 : 1 - Normal connect success
17:56:58 : 2 - Emergency connect success
17:56:58 : Phone Mode(2)
17:56:58 : *****WorkModelDLL Start*****
17:56:58 : _DetachDLL Call
17:56:58 : _DetachDLL Call End
17:56:58 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\V21D.wdb)
17:56:58 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
17:56:58 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGP920.dll)
17:56:58 : _DetachDLL Call
17:56:58 : _DetachDLL Call End
17:56:58 : Call fn_StartUpgrade
17:56:58 : ********* 2Chip Model.dll input Parameter*************
17:56:58 : MODEL_EVENT : 32769
17:56:58 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\V21D.wdb
17:56:58 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
17:56:58 : BootWaitTime : 74250
17:56:58 : UsbHighSpeed : FALSE
17:56:58 : PhoneMode : 2
17:56:58 : NewPhoneBinVersion : V21D_00
17:56:58 : ClearSI : FALSE
17:56:58 : AuthMark : 0
17:56:58 : ********* 2Chip Model.dll input Parameter End*************
17:57:03 : wParam : 2004, lParam = 7
17:57:03 : Step : TYPE_WPARAM_IFX_DN_POS
17:57:03 : wParam : 2007, lParam = 0
17:57:03 : Step : TYPE_WPARAM_READ_FILES
17:57:03 : wParam : 2004, lParam = 8
17:57:03 : Step : TYPE_WPARAM_IFX_DN_POS
17:57:12 : wParam : 2004, lParam = 9
17:57:12 : wParam : 2004, lParam = 10
17:57:13 : wParam : 2003, lParam = 97
17:57:13 : Step : TYPE_WPARAM_DOWNLOAD_FILENAME
17:57:13 : wParam : 2004, lParam = 15
17:57:13 : Step : TYPE_WPARAM_IFX_DN_POS
17:58:43 : wParam : 2010, lParam = 3013
17:58:43 : CleanModelDll() : Free Model.dll
17:58:43 : _DetachDLL Call
17:58:43 : _DetachDLL Call End
17:58:43 : Page_Error ºÎºÐÀÔ´Ï´Ù
17:58:43 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
17:58:43 : wParam : 2010, lParam = 3016
17:58:43 : CleanModelDll() : Free Model.dll
17:58:43 : _DetachDLL Call
17:58:43 : _DetachDLL Call End
17:58:43 : Page_Error ºÎºÐÀÔ´Ï´Ù
17:58:43 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
I later tried again using V21E_00.kdz with similar results:
Code:
23:54:50 : [C:\LGMobileUpgrade] Try to delete folder
23:54:50 : RemoveDirectory1 Error(2):C:\LGMobileUpgrade
23:54:50 : Start Date : 2012-11-20 23:54:50
23:54:50 : ---------- QM Testmode ---------
23:54:50 : ***** Check Tool Version *****
23:54:50 : Tool version : 1.5.4.8
23:54:50 : UpgradeDLL version : 1.2.6.7
23:54:50 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
23:54:50 : LGE USB Driver Version :
23:54:50 : Android PDLV Version :
23:54:50 : Android NDLV Version :
23:54:50 : ******************************************
23:54:50 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
23:54:50 : RemoveDirectory1 Error(2):C:\ProgramData\LGMOBILEAX\Phone
23:54:50 : SetEmerModeAT()
23:54:50 : _IsConnectedPhone Call
23:55:12 : _IsConnectedPhone(2)
23:55:12 : 0 - NotConnected.
23:55:12 : 1 - Normal connect success
23:55:12 : 2 - Emergency connect success
23:55:12 : *****CheckOS Start********
23:55:12 : Microsoft_Windows_XP_Home Edition_Service Pack 3
23:55:12 : *****CheckPCSyncPrograms Start*****
23:55:12 : PCSyncPrograms Not Found - OK and ready to upgrade
23:55:12 : Checking the connection with the cell phone...
23:55:12 : dwWaitResetTime(40000 ms)
23:55:13 : Phone Mode(2)
23:55:13 : *****GetPhoneType Start*****
23:55:13 : Phone Type : OMAP_IFX
23:55:13 : *****GetPhoneBinaryVersion Start*****
23:55:14 : *****Get ESN / IMEI / MEID Start*****
23:55:14 : ESN/IMEI/MEID : 357116041772537
23:55:14 : Phone type Compare start
23:55:14 : *****CheckPCSyncPrograms Start*****
23:55:14 : PCSyncPrograms Not Found - OK and ready to upgrade
23:55:15 : ****************CheckAndDownload********************
23:55:15 : ******Extract Start C:\LG3D\Firmware\V21E_00.kdz*****
23:55:15 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
23:55:15 : File Size = 361975894
23:55:44 : Extract kdz file Success.
23:55:49 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\V21E.wdb\n
23:55:49 : WDB(or DZ) FullPath(C:\ProgramData\LGMOBILEAX\Phone\\V21E.wdb)
23:55:49 : Extracted C:\ProgramData\LGMOBILEAX\Phone\\LGP920.dll\n
23:55:49 : Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\\LGP920.dll)
23:55:50 : NNNNN WDB FullPath(C:\ProgramData\LGMOBILEAX\Phone\V21E.wdb)
23:55:50 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGP920.dll)
23:55:50 : Extract End C:\Users\Shaz\Downloads\Android\LG3D\Firmware\V21E_00.cab
23:55:51 : ------------------Model.dll Information-------------------
23:55:51 : Filename : LGP920.dll
23:55:51 : Version : 1.0.0.3
23:55:51 : File size : 262144
23:55:51 : File date : 2011/06/27-21:28:08
23:55:51 : PC Created date: 2012/11/20-23:55:49
23:55:51 : ----------------------------------------------------------
23:55:51 : *****Check LGCM Programs Start*****
23:55:51 : LGCM Programs Not Found - OK and ready to upgrade
23:55:51 : *****WorkModelDLL Start*****
23:55:59 : strPhoneBinaryPath(C:\ProgramData\LGMOBILEAX\Phone\V21E.wdb)
23:55:59 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
23:55:59 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGP920.dll)
23:55:59 : _DetachDLL Call
23:55:59 : _DetachDLL Call End
23:55:59 : Call fn_StartUpgrade
23:55:59 : ********* 2Chip Model.dll input Parameter*************
23:55:59 : MODEL_EVENT : 32769
23:55:59 : PhoneBinaryPath : C:\ProgramData\LGMOBILEAX\Phone\V21E.wdb
23:55:59 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
23:55:59 : BootWaitTime : 49500
23:55:59 : UsbHighSpeed : FALSE
23:55:59 : PhoneMode : 2
23:55:59 : NewPhoneBinVersion : V21E_00
23:55:59 : ClearSI : FALSE
23:55:59 : AuthMark : 0
23:55:59 : ********* 2Chip Model.dll input Parameter End*************
23:56:04 : wParam : 2004, lParam = 7
23:56:04 : Step : TYPE_WPARAM_IFX_DN_POS
23:56:04 : wParam : 2007, lParam = 0
23:56:04 : Step : TYPE_WPARAM_READ_FILES
23:56:04 : wParam : 2004, lParam = 8
23:56:04 : Step : TYPE_WPARAM_IFX_DN_POS23:57:44 : wParam : 2010, lParam = 3013
23:56:13 : wParam : 2004, lParam = 9
23:56:13 : wParam : 2004, lParam = 10
23:56:14 : wParam : 2003, lParam = 97
23:56:14 : Step : TYPE_WPARAM_DOWNLOAD_FILENAME
23:56:14 : wParam : 2004, lParam = 15
23:56:14 : Step : TYPE_WPARAM_IFX_DN_POS
23:57:44 : CleanModelDll() : Free Model.dll
23:57:44 : _DetachDLL Call
23:57:44 : _DetachDLL Call End
23:57:44 : Page_Error ºÎºÐÀÔ´Ï´Ù
23:57:44 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
23:57:44 : wParam : 2010, lParam = 3016
23:57:44 : CleanModelDll() : Free Model.dll
23:57:44 : _DetachDLL Call
23:57:44 : _DetachDLL Call End
23:57:44 : Page_Error ºÎºÐÀÔ´Ï´Ù
23:57:44 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
[Method: 3]
For my next attempt, I tried these guides (without the modded USB cable):
[TUTORIAL] Flash BIN rom, Unbrick, Update - Optimus 3d (Service Flash software)
[GUIDE] Recovering from brick/bootloop
[GUIDE] [P920] [SU760] Resurrection Guide (Lets get those brick's fixed...)
and
http://forum.xda-developers.com/showpost.php?p=33509495&postcount=110
After several hours and many attempts! it can boot boot both into Normal Download mode and omapboot Download Mode (Button with yellow arrows followed by Korean letters). No matter which download mode I try, the LG Flash Tool gives an error after trying to communicate with the IFX Modem:
I have tried contacting others who have had similar issues but not had any replies.
Questions:
Would the modified USB cable help with the LG Flashing tool?
Assuming this is a hardware issue and only LG can repair it, is there any way of returning to stock V21E rom without root via clockworkmod recovery and then replace cwm recovery so there's no sign of it having been rooted?
I would appreciate any pointers or advice!
Try to flash prada baseband it is under IMEI tutorial with lg flash tool. Then see what is your IMEI an try insert old one with hyperterminal.
I woud first flash 21kdz and do factory reset so you know that AP part is ok. Then flash baseband only CP file.
Sent from my LG-SU760 using xda app-developers app
iodak said:
Try to flash prada baseband it is under IMEI tutorial with lg flash tool. Then see what is your IMEI an try insert old one with hyperterminal.
Click to expand...
Click to collapse
Hi iodak, and thanks for the reply! If you're referring to the 'LGP940_CP.fls' baseband file, that was one of the first things I did (method 1 in OP). Just tried it again and getting the same error!
The IMEI is blank.
When the port setting 'CP Image Download' is selected, the connection to the phone is lost. The terminal window does not respond because the 'Intel USB Flash loader utility' is not detected, hence no driver and no port for it to communicate with the phone.
iodak said:
I woud first flash 21kdz and do factory reset so you know that AP part is ok. Then flash baseband only CP file.
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
Also tried that (Method 2 in OP), keeps hanging when trying to communicate with the IFX Modem and fails shortly after.
Flashed several different kdz files on my own P920 without any probelms
Tried it with the 910K Ohm resistor between pins 4 and 5 of the USB cable but still the same.
Not had a chance to test the cable as I've lent out my multimeter to a friend.
Given it to a friend that has an Octopus box to try and repair the IMEI that way.
Hi, i have the exact same problem with my p920 and tried the same ways without success.
Could you solve the problem somehow? Octopus box?
Thanks, Krisz
kryss81 said:
Hi, i have the exact same problem with my p920 and tried the same ways without success.
Could you solve the problem somehow? Octopus box?
Thanks, Krisz
Click to expand...
Click to collapse
Hi Krisztián, unfortunately the Octopus box didn't work. It failed to detect the phone in both 'Modem' or 'OMAP' modem. Also tried modifying the original LG USB cable with both a 910k resistor and a 56k resistor (as suggested by Furious Gold) without any luck. Hence pointing to a hardware fault!
The problem with the documented method of restoring the imei is that the corrupt/damaged ifx modem prevents the phone from going into 'CP Image Download' mode and thus allowing Windows to detect and install the 'Intel USB Flash Loader utility' so that Tutty can write/flash a new imei number to the modem.
As a work around you can try putting the phone into a mode whereby it iss ready to be flashed aka 'omapboot Download Mode' (Button with yellow arrows followed by Korean letters). Follow steps 2 to 9 in this guide by xbsall: http://forum.xda-developers.com/showthread.php?t=1942836
When you get to this screen:
Then:
josuelopezv said:
Open Tutty (or hyper terminal) and select serial protocol. Click on open
Type AT if response is not OK, change port number (it is possible that when typing you don’t see any letters)
Type at%imei, it should display a dummy IMEI
Type at%imei=x,x,x,x,x,x,x,x,x,x,x,x,x,x,x where x,x,x... is your orginal IMEI number (found under the battery of your phone). It should response IMEI WRITE OK
Reboot phone
Click to expand...
Click to collapse
If it works, try doing the "Extra Step for P920 User's" in xbsall's guide.
Hope that helps and let me know how you get one.
Hi Guan,
Thanks for the suggestion, but it did not work.
I can put the phone into download mode. (volume up +cable+power button), after that the computer recognize it correctly.
Com port is changed to 41, i connect with tutty to the com41 of the phone, but there is no response after.
I can not give any command, only the green cursor is there. (i tried to type and press enter even like this but no response.)
So what do you say? is this phone now equal to an ipod touch? only hardware fix can solve it?
Thanks, Krist
Guantonio said:
Hi Krisztián, unfortunately the Octopus box didn't work. It failed to detect the phone in both 'Modem' or 'OMAP' modem. Also tried modifying the original LG USB cable with both a 910k resistor and a 56k resistor (as suggested by Furious Gold) without any luck. Hence pointing to a hardware fault!
The problem with the documented method of restoring the imei is that the corrupt/damaged ifx modem prevents the phone from going into 'CP Image Download' mode and thus allowing Windows to detect and install the 'Intel USB Flash Loader utility' so that Tutty can write/flash a new imei number to the modem.
As a work around you can try putting the phone into a mode whereby it iss ready to be flashed aka 'omapboot Download Mode' (Button with yellow arrows followed by Korean letters). Follow steps 2 to 9 in this guide by xbsall: http://forum.xda-developers.com/showthread.php?t=1942836
When you get to this screen:
Then:
If it works, try doing the "Extra Step for P920 User's" in xbsall's guide.
Hope that helps and let me know how you get one.
Click to expand...
Click to collapse
I'm having this same problem, hopefully someone comes up with a solution.
n3fta said:
I'm having this same problem, hopefully someone comes up with a solution.
Click to expand...
Click to collapse
Hi n3fta, is there any signs of physical damage on yours? Also what ROM and baseband do you have installed?
Guantonio said:
Hi n3fta, is there any signs of physical damage on yours? Also what ROM and baseband do you have installed?
Click to expand...
Click to collapse
There is no physical damage to the phone it looks brand new. The phone is on 20c just a stock gingerbread rom, I'm not sure about the baseband. I purchased this phone from ebay with missing IMEI after losing mine. I was aware of the restore IMEI thread so when I noticed this particular phone for $100 I thought it was a bargain and figured I could repair it in 10 minutes...I was wrong.
I've tried flashing the phone every way I know how and it hangs at waiting for IFX Modem no matter what I do. I'm really hoping this is just a software issue and there is no damaged hardware, but I'm beginning to have my doubts.
I decided to uninstall all drivers and now I cannot install the OMAP drivers. The phone will not go into download mode at all, nor does it vibrate like it should when going into download mode, I probably should have mentioned that the phone has not vibrated like it was going into download mode since I started messing with it. OMAP just keeps flashing over and over when I plug the device in with no battery, but does not appear once battery is inserted. I had no problem at all getting my old phone into download mode, so I suspect this has something to do with our problem.
Just noticed I can flash roms using CWM. I'm now on Thiaz but it has made no difference, is there anyway we can flash fls files using CWM? Not sure if it would help or not just throwing it out there.
Listen bro if map flashes its OK it happens to me and if it doesn't vibrate in download mode that's OK ...just install all the drivers again and restart your PC and the start again and flash a gb with LG flash tool..wish u the best and give feedback so we can help u.
Sent from my LG-P920 using xda premium
alphatia said:
Listen bro if map flashes its OK it happens to me and if it doesn't vibrate in download mode that's OK ...just install all the drivers again and restart your PC and the start again and flash a gb with LG flash tool..wish u the best and give feedback so we can help u.
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
Well I installed drivers again and it appears to be going into download mode and device manager shows LGE CDMA USB SERIAL PORT (COM41)
It still will not get past waiting for IFX Modem, even when trying to use the WKParks Omap for fastboot it doesn't ever get past waiting, every other program hangs at waiting for IFX Modem.
Try another PC with windows 7 and try another cable
Sent from my LG-P920 using xda premium
alphatia said:
Try another PC with windows 7 and try another cable
Sent from my LG-P920 using xda premium
Click to expand...
Click to collapse
I have tried using windows 7 and another cable but it's still not working.
My problem is the exact same as the OP of this thread. IFX Modem not responding and no new device being installed in tutty.
Still having this problem, anybody have any idea what the problem might be?
I cannot restore IMEI unless I can get a connection in putty but no new device is being installed when I dial 3845#*920# and select cp image download or cp usb. I have tried this on 3 different PC's XP, Win7 32 and Win7 64 the result is always the same...no new device installed.
When trying to restore using LG Mobile Software it always crashes at 15% during installation.
LG Flash Tool and Smart Flash both fail at waiting for IFX modem.
Using the KDZ installer it always errors out early in the installation process.
Is there any other way to restore my IMEI? Are there any alternate methods of communication with tutty or hyperterminal?
Would going back to Froyo possibly help? I would have tried it by now but can't find a zip version of the rom to install and the only way I can install roms is through CWM.
Any help would be greatly appreciated.
How to talk to the Modem with AT commands from the phone
I have noticed that when using a working Optimus 3d in device manager I see LG USB CDMA Serial Adapter or something to that effect, when using my non working phone I only get LG Mobile USB Serial Port. Without CDMA serial port I cannot update using Smart Flash, Flash Tool or LG Mobile Software Updaete.
I have exactly the same problem as n3fta...IFX modem not connecting...i did all the methods too..all the same errors.
The phone was working when i got it. I rooted it and installed clockworkmod but i was for p920, not for mine p920h. So when it rebooted it was in Lg logo loop. I used fastboot v0.5 to get it back alive and installed some ROMs but all with no IMEI or signal.
Is there a solution?
---------- Post added at 04:12 PM ---------- Previous post was at 03:30 PM ----------
berthilbl said:
I have exactly the same problem as n3fta...IFX modem not connecting...i did all the methods too..all the same errors.
The phone was working when i got it. I rooted it and installed clockworkmod but i was for p920, not for mine p920h. So when it rebooted it was in Lg logo loop. I used fastboot v0.5 to get it back alive and installed some ROMs but all with no IMEI or signal.
Is there a solution?
Click to expand...
Click to collapse
Is there a way we can get a full backup with someone that has the same phone working and load it on clockworkmod recovery? Or would it be like cloning the phone or something like this? Sorry, im a bit new on this area.
@berthilbl
I exhausted every software repair option before returning it to my friend, hence, it was definitely a hardware fault. Even Octopus box refused to detect the modem, even with the official LG flashing cable for the P920 (similar to the modded one in this thread but with a different ohm resistor). As it was on GB when I got it, the baseband had been flashed some time after it had shipped. Hence, it wasn't shipped with the fault as a bad batch but developed it later.
You mentioned that yours is a P920h flashed with cwm for the P920. Have you tried returning to stock recovery?
If all else fails, there are several video's on youtube showing how to dismantle the P920. It might be worth taking a look at the circuitry. May turn out to be something simple like a dry joint or just a loose connection.
Phone facts:
LG-F180, S/N: 0066451ae1d458e3
TWRP 2.5.0.0 installed together with LGNPST TeenyBin
From the fastboot screen
PRODUCT NAME mako
VARIANT mako 32GB
HW VERSION rev_11 (&¤)
BOOTLOADER VERSION MAKOZ10f
BASEBAND VERSION N/A
CARRIER INFO None
SERIAL NUMBER xxxxx
SIGNING production
SECURE BOOT Enabled
LOCK STATE UNLOCKED
NOTE: I found somewhere that rooting is NOT enough you also have to unlock, (FreeGee?). Could someone please confirm or reject?
3) Now I turned to “[REPAIR] TeenyBin - Softbrick Quick Fix / Bootloader Unlock [E971, E973, E975, F180*]” using LGNPST and TeenyBin. Finally something happened – I could access the TWRP built in.
4) Then I used ADB to push ROM to the internal SDCARD and recovery to install. But this method failed – tried several ROMs which all gave errors initially. I discovered that the install script pointed at “e975” in(ro.product.device and ro.build.product but the phone reports “geehrc4g”
This is the output in recovery.log when trying to flash ROM
Warning: No file_contexts
script aborted: assert failed: getprop("ro.product.device") == "e975" || getprop("ro.build.product") == "e975"
assert failed: getprop("ro.product.device") == "e975" || getprop("ro.build.product") == "e975"
Following the advice of changing the script by
a. Deleting the ‘assert’ line in the script, or
b. Changing the element to what the phone reports did not help
E:Zip signature verification failed: 1
Error flashing zip '/sdcard/thinkingbridge.zip'
Updating partition details...
To ensure working environment I tried to flash gapps which worked perfectly so connection and recovery must be functional.
5) Now turning to: ”[GUIDE] How to UNBRICK your Optimus G - security error, bootloop etc”
I used the method described and downloaded the appropriate KDZ file etc. etc but flashing gives this log:
10:05:58 : Launching SW update
10:05:58 : Unpacking KDZ
10:06:05 : KDZ file extracted
10:06:13 : Files were extracted.
10:06:13 : LGMobileDL Load.
10:06:13 : Port = -1
10:06:13 : Connecting to phone
10:06:25 : Check Phone mode = 2
10:06:25 : Phone type check.......
10:06:26 : LGMobileDL.DLL Loading....
10:06:26 : _SetAuthMark Fail
10:06:26 : _SetAuthMark Ok : wAuthMark(65535)
10:06:26 : _DetachDLL Call
10:06:26 : _DetachDLL Call End
10:06:26 : ParamPhone\E97510
10:06:26 : Param : waitTime = 0
10:06:26 : Param : UsbHighSpeed = 1
10:06:26 : Param : PhoneMode = 2
10:06:26 : Param : BinVersion = E97510D_00
10:06:26 : Param : AuthMark = 65535
10:06:26 : Call fn_StartUpgrade
10:09:27 : 3GQCT : wParam = 100, lParam = 210
10:09:27 : Step : Upgrade Error error code = 210
10:09:27 : ResetStartInfo() Call
10:09:27 : _DetachDLL Call
10:09:27 : _DetachDLL Call End
10:09:27 : FreeLibrary Call
10:09:27 : FreeLibrary Call End
10:09:27 : ResetStartInfo() Call End
10:09:29 : ===FINISHED===
At the point where KDZ file is extracted the phone reverts from download mode to recovery which is probably why it fails.
I read the thread at xdadeveloper forum "[Q] Unbricking LG Optimus G e975 - using LGNPST, TWRP, ADB". Do all the things suugested but nothing happens.
I am so confused about somethings that are:
In recovery mode it shows that it it is a MAKO product. What is this mean because every thing i know is that it is a LG Optimus G F180 and after searching goole, i find that MAKO is a Nexus 4. So What ROM i have to download and from where?
How can i solve this problem? Please help me and reply me. I tried every method suggested on internet. Many people have same problem stated but no solution is given to them..
My email is [email protected].
Hi,
Yes, you have to unlock and root.
Locked phones are arrangements made between a network provider and a phone manufacturer. So your phone model is locked by your phone manufacturer and it is tied to a particular network provider.
The Nexus 4 (MAKO) and your phone has similar specs, except that Nexus 4 does not support microSD, so you will have to install it from the phone's internal memory (aka "sdcard"). Custom ROMs for phones with microSD are usually installed from the microSD instead of phone internal memory.
Hope this helps.
chan.sk said:
Hi,
Yes, you have to unlock and root.
Locked phones are arrangements made between a network provider and a phone manufacturer. So your phone model is locked by your phone manufacturer and it is tied to a particular network provider.
The Nexus 4 (MAKO) and your phone has similar specs, except that Nexus 4 does not support microSD, so you will have to install it from the phone's internal memory (aka "sdcard"). Custom ROMs for phones with microSD are usually installed from the microSD instead of phone internal memory.
Hope this helps.
Click to expand...
Click to collapse
I think you does not understand the actual situation. My phone has
no OS installed.
Only goes into recovery and download mode.
Read my thread again.I do the above steps to get back my phone but no sucess.
mansoor3131 said:
I think you does not understand the actual situation. My phone has
no OS installed.
Only goes into recovery and download mode.
Read my thread again.I do the above steps to get back my phone but no sucess.
Click to expand...
Click to collapse
You may be able to get some help from this thread:
http://forum.xda-developers.com/forumdisplay.php?f=1838
I think I can help you if you tell me about actual variant of your phone I mean detail of your cell if it is F180S K or L
After that I will be able to suggest some method.
Hi everybody,
I’m at a point where I need to get some help…
My story:
I hard bricked my P500 one year ago … I had CM7 on it, and I installed CM10, but had no network,
so I upgraded the baseband, unfortunately it froze in the middle of the upgrade, I took the battery out, and it was the end …
BOUM … No fast boot, no emergency mode anymore … nothing … dead … Impossible to switch it on …
I bought a new one, which is working under CM7. No problem.
(So if it helps to fix the old hard bricked one I have a working P500 under CM7)
I just got the idea to fix the dead one! Because it’s fun, but I’m stuck and need some help.
JTAG reset:
Since it was hard bricked, the only possibility was a JTag reset. I found a nice guy doing it close to my place and it worked!
The phone has been recognized without any problem, the full dump worked without any mistakes, and finally the bootloader has been restored with a RiffBox.
(See attached picture) The phone can now reach the emergency mode again.
Flash original firmware on P500 with KDZ - not successful:
http://forum.xda-developers.com/showthread.php?t=875881
The drivers from LG are installed, I disabled the LG modems,
my computers (xp) sees the phone without any problems.
I tried to flash the original firmware on it with KDZ, which I’m used to do
but this time I get every time an error
"Error upgrade
WPARAM : 100
LPARAM : 4008"
(Logfile attached)
Flash stock rom with LGMDP – not successful:
http://forum.xda-developers.com/showthread.php?t=1324105
Same here, the P500 is recognized by LGMDP,
it seems the IMEI number is not active,
and everytime I flashed a rom, I got an error:
“Error! AMSS writing” (See attached picture)
Flash a custom recovery (CWM) from LGMDP – not successful
http://forum.xda-developers.com/showthread.php?t=1318750
I also tried to flash CWM, LGMDP seems to have installed it, I got a “Download complete” message,
but I cant access the recovery mode. Vol Down +Home + Power On just brings me back to the yellow emergency screen.
I of course checked everywhere online … I have seen sometimes the same errors as mine but no solutions ….
Do, one of you, have a solution? Or know the errors I’m encountering?
Or do you have another way tp get out of the emergency mode?
Thank you for reading and helping me in any way …
Bestrau.
How much did JTAG cost ?
Sent from my GT-I9082 using Tapatalk
Hey akiratoriyama, I read your posts, sorry for your hard bricked ...
It happened to me too, I found a guy in Germany he does it for 18 euro and you have to pay for the shipping.
no signal (baseband fix) : http://forum.xda-developers.com/showthread.php?t=2616412
restore your original rom here: http://forum.xda-developers.com/showthread.php?t=2559363
hit like if i helped..
Same error as usual ...
voltaire23 said:
no signal (baseband fix) : http://forum.xda-developers.com/showthread.php?t=2616412
restore your original rom here: http://forum.xda-developers.com/showthread.php?t=2559363
hit like if i helped..
Click to expand...
Click to collapse
Hi Voltaire,
your proposition is just the same as all the others I tried !
I gave it a try,
but got the same error ...
[11:02:44:461] : =============================================
[11:02:44:461] : Log is started on 19.01.2014, at 11:02:44:461,
executable: C:\Prerequisite\KDZ Updater\KDZ_FW_UPD.exe (ProcID: 0x00000ab0),
compile time : Dec 8 2010 09:19:37
[11:02:44:461] : Version :
[11:02:44:633] : Get Usb Port
[11:02:44:633] : rsi.strFriendlyName=LGE Android Platform USB Serial Port (COM5)
[11:02:44:633] : FriendlyNameList[iii].szFriendlyName=LGE Android Platform USB Serial Port
[11:02:44:633] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 1 - COM5
[11:02:44:633] : Port = COM5
[11:02:44:648] : UNKNOWN : Req(12) -> Rsp(13)
[11:02:44:664] : UNKNOWN : Req(12) -> Rsp(13)
[11:02:44:679] : UNKNOWN : Req(12) -> Rsp(13)
[11:02:44:679] : >> DIAG_STATUS_F FAILED
[11:02:44:695] : >>Get Model Name [DIAG_VERNO_F]
[11:02:44:711] : BAD CONN MODE : Req(0) -> Rsp(3)
[11:02:44:726] : BAD CONN MODE : Req(0) -> Rsp(3)
[11:02:44:742] : BAD CONN MODE : Req(0) -> Rsp(3)
[11:02:44:789] : BAD CONN MODE : Req(0) -> Rsp(3)
[11:02:44:804] : BAD CONN MODE : Req(0) -> Rsp(3)
[11:02:44:820] : BAD CONN MODE : Req(0) -> Rsp(3)
[11:02:44:820] : FAIL (No Phone)
[11:02:44:820] : GetModelName() Operation Failed Check Diag CMD
[11:02:44:820] : EMERGENCY Booting Mode
[11:02:44:820] : >>Get Model Name in Emergency Mode [DLOAD_VERREQ_F]
[11:02:44:836] : BS/P500/7D1\LOCALS~1\Temp\DZ10.tmp
[11:02:44:836] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 0 - P500
[11:02:44:851] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[11:02:44:851] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[11:02:44:867] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[11:02:44:867] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[11:02:44:883] : DLOAD_NAK_F reason_msb = 3, reason_lsb = 3
[11:02:44:883] : [ DLOAD ERROR ] : NAK_INVALID_LEN
[11:02:44:883] : NV Write Fail : NV ITEM 9028(9028)
[11:02:44:992] : >> GET DLOAD COMM MODE
[11:02:45:008] : [GetCommMode] Communication mode : 2
[11:02:45:008] : Pre Nand Download
[11:02:45:008] : >>Set Trusted Mode [DLOAD_NAND_SEC_MODE] sec_mode = 1 (1=trusted 0=NonTrusted)
[11:02:45:008] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - TRUSTED MODE
[11:02:45:023] : [COM5] >>NandFlashInitWithFile(PARTITION TBL)
[11:02:45:023] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT PARTITION TBL
[11:02:45:148] : ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_TO_SDRAM 3
[11:02:45:148] : [COM0] ¸Þ½ÃÁö º¸³¿ TYPE_WPARAM_WRITE_AMSS 15
[11:02:45:148] : [COM5] >>NandFlashInitWithFile(AMSS MODEM HEADER)
[11:02:45:148] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - INIT AMSS MODEM HEADER
[11:02:45:164] : [COM0] >>Dl_AsyncWrite()
[11:02:45:164] : >> AMSS FLASHING ...
[11:02:45:164] : ¸Þ½ÃÁö º¸³¿ ProgreassiveBar Init wParam TYPE_WPARAM_PROGRESSIVE_POS=5 lParam(pos)=0 nResult=0
[11:02:45:164] : Sending Pkt Seq : 0
[11:02:45:164] : Sending Pkt Seq : 1
[11:02:45:164] : Sending Pkt Seq : 2
[11:02:45:164] : Sending Pkt Seq : 3
[11:02:45:164] : Sending Pkt Seq : 4
[11:02:45:164] : Sending Pkt Seq : 5
[11:02:45:164] : Sending Pkt Seq : 6
[11:02:45:164] : Sending Pkt Seq : 7
[11:02:45:164] : Sending Pkt Seq : 8
[11:02:45:164] : Sending Pkt Seq : 9
[11:02:45:179] : Dl_AsyncWrite - ErrNo(45), Addr(0x00004800), NandErrNo(0x04)
[11:02:45:179] : [COM0] ERROR Dl_AsyncWrite() TYPE_LPARAM_UPGRADE_ERROR_WRITE_TO_FLASH
[11:02:45:211] : WM_COPYDATA ¸Þ½ÃÁö º¸³¿ 3 - Close Port
[11:02:45:211] : Close Port<<
[11:02:45:211] : TYPE_WPARAM_UPGRADE_ERROR
[11:02:45:226] : Log finished
Click to expand...
Click to collapse
Any ideas ?
Bestrau said:
Hi Voltaire,
your proposition is just the same as all the others I tried !
I gave it a try,
but got the same error ...
Any ideas ?
Click to expand...
Click to collapse
Well.. thats weird..hmmm did you follow the steps EXACTLY as written??
remove sd card while performing that.. disable lg modem... hmm retry again.. patience..
voltaire23 said:
Well.. thats weird..hmmm did you follow the steps EXACTLY as written??
remove sd card while performing that.. disable lg modem... hmm retry again.. patience..
Click to expand...
Click to collapse
Yes I followed it exactly as written .... I tried a couple of times .... same results ...
Bestrau said:
Yes I followed it exactly as written .... I tried a couple of times .... same results ...
Click to expand...
Click to collapse
Is your Download Mode unlocked????
voltaire23 said:
Is your Download Mode unlocked????
Click to expand...
Click to collapse
The only thing I can do is : enter the Emergency Mode by pressing volume up button + back button together and then plug the usb cable.
Bestrau said:
The only thing I can do is : enter the Emergency Mode by pressing volume up button + back button together and then plug the usb cable.
Click to expand...
Click to collapse
Uhmm..sorry to say but all I can say is try to search in the threads because I know there are other ways besides KDZ.. And you know that KDZ is very lethal mostly on optimus one variants and others...hmm..dont loose hope man..good luck.. GODBLESS.
I should try put the phone in Emergency Mode and start trying the KDZ with a Stock Gingerbread from different sources until it works...
voltaire23 said:
Uhmm..sorry to say but all I can say is try to search in the threads because I know there are other ways besides KDZ.. And you know that KDZ is very lethal mostly on optimus one variants and others...hmm..dont loose hope man..good luck.. GODBLESS.
Click to expand...
Click to collapse
Thank you ...
Too bad nobody has a solution for this "Upgrade Error: WParam: 100 LParam: 4008" on KDZ ...
And as I said in the original thread, I also tried with LGMDP, but I got everytime an "amss writing" error.
Bestrau said:
Thank you ...
Too bad nobody has a solution for this "Upgrade Error: WParam: 100 LParam: 4008" on KDZ ...
And as I said in the original thread, I also tried with LGMDP, but I got everytime an "amss writing" error.
Click to expand...
Click to collapse
No prob. well..you can always press my ""Thanks"" button..haha.
Same problem here((( Did everything but still on LG logo((
Make sure you have the correct KDZ file for your device and download my attachment.
I know for a fact that this KDZ Updater works as it is the exact one I used to restore 2 P506's back to life just a month or so ago. I did this on Windows 7 Professional 64 bit so it should also work for Windows XP.
Do all the usual KDZ stuff. Disable LG Modem in Device Manager, etc. Then follow the directions in the ReadMe.txt in the attached archive. Best of luck!
voltaire23 said:
No prob. well..you can always press my ""Thanks"" button..haha.
Click to expand...
Click to collapse
Your help is appreciated, but asking for people to press the "Thanks" button is defeating the purpose of the "Thanks" button. The "Thanks" meter has no effect on your account and standings here at XDA.
voltaire23 said:
No prob. well..you can always press my ""Thanks"" button..haha.
Click to expand...
Click to collapse
shinobisoft said:
Your help is appreciated, but asking for people to press the "Thanks" button is defeating the purpose of the "Thanks" button. The "Thanks" meter has no effect on your account and standings here at XDA.
Click to expand...
Click to collapse
Look man, it's upsetting to have the phone in Emergency Mode. August last year, my phone got stuck too, tried every program I could and never boot successfully. Took my phone to the store, they said they tried everything but they couldn't make it work. After a couple months with another device I decided to plug my LG P500 in to the computer and see if there was any new program available to flash. Strangely, my phone BOOTED in the stock rom and has been working flawlessly since. What I'm saying is, don't lose hope, this phone is amazing!